HP-ICF-SYSLOG-MIB
119 objects
The MIB module for configuring and monitoring Syslog applications. The HP Syslog application sends Syslog messages.
Imported Objects
| HP-ICF-OID | hpicfSyslog |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.14.1 | IdentityhpicfSyslogMIB | The MIB module for configuring and monitoring Syslog applications. The HP Syslog application sends Syslog messages. | ||
| 1.3.6.1.4.1.11.2.14.14.1.0 | NodehpicfSyslogNotifications | |||
| 1.3.6.1.4.1.11.2.14.14.1.0.1 | NotificationhpicfSyslogStatusChanged | current | This notification is sent when any of the objects listed are accessed. For example, when the first server address is entered, the application starts [hpicfSysl… | |
| 1.3.6.1.4.1.11.2.14.14.1.1 | NodehpicfSyslogObjects | |||
| 1.3.6.1.4.1.11.2.14.14.1.1.1 | TablehpicfSyslogControlTable | not-accessible | current | A table containing the configuration parameters pertaining to the hpicfSyslog applications serviced by an SNMP agent. |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1 | RowhpicfSyslogControlEntry | not-accessible | current | The configuration parameters pertaining to a Syslog application. |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1.1 | ColumnhpicfSyslogControlIndex | not-accessible | current | The Index that uniquely identifies the Syslog application in the hpicfSyslogControlTable. The value of the index for a Syslog application may not be the same a… |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1.2 | ColumnhpicfSyslogControlDescr | read-create | current | A user definable description of the Syslog application. This description could be used by Syslog management applications e.g. in reports or in user interfaces.… |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1.3 | ColumnhpicfSyslogControlBindAddrType | read-create | current | The type of Internet address which follows in hpicfSyslogControlBindAddr. Currently only IPv4 is supported. |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1.4 | ColumnhpicfSyslogControlBindAddr | read-create | current | The specific address the Syslog sender will bind to. The format of the address is specified by the corresponding hpicfSyslogControlBindAddrType object. |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1.5 | ColumnhpicfSyslogControlRowStatus | read-create | current | This object is used to create, modify and delete rows in the hpicfSyslogControlTable. The value of hpicfSyslogControlDescr can be changed when this object is i… |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1.6 | ColumnhpicfSyslogControlBindAddrIsOobm | read-create | current | This object indicates the specific address to which Syslog sender will bind is on OOBM interface. This mib object will be applicable only if there is a physica… |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1.7 | ColumnhpicfSyslogControlSmmLog | read-create | current | This object is applicable for a device with a standby management module like 8200zl. When the value of this object is set to enabled, all the log messages from… |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1.8 | ColumnhpicfSyslogControlTransportProtocol | read-write | current | The transport protocol used for the connection to the Syslog server associated with this row. The default value is UDP. |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1.9 | ColumnhpicfSyslogControlDestinationPort | read-write | current | The socket port used by the transport protocol to connect to the Syslog server associated with this row. The default Syslog port for UDP is 514, for TCP is 147… |
| 1.3.6.1.4.1.11.2.14.14.1.1.1.1.10 | ColumnhpicfSyslogControlFilterName | read-write | current | The filter Name connected to the Syslog server. |
| 1.3.6.1.4.1.11.2.14.14.1.1.2 | NodehpicfSyslogOperations | |||
| 1.3.6.1.4.1.11.2.14.14.1.1.2.1 | ScalarhpicfSyslogOperationsMsgsTransmitted | read-only | current | The number of messages transmitted by the Syslog sender. This does not include the messages that could not be queued for transmission by the hpicfSyslog sender… |
| 1.3.6.1.4.1.11.2.14.14.1.1.2.2 | ScalarhpicfSyslogOperationsMsgsDropped | read-only | current | The number of messages that could not be queued for transmission by the Syslog sender. Discontinuities in the value of this counter can occur at re-initializat… |
| 1.3.6.1.4.1.11.2.14.14.1.1.2.3 | ScalarhpicfSyslogOperationsLastMsgTransmittedTime | read-only | current | The value of sysUpTime when the last message was transmitted by the hpicfSyslog sender. If no messages have been transmitted by this Syslog application, since … |
| 1.3.6.1.4.1.11.2.14.14.1.1.2.4 | ScalarhpicfSyslogOperationsStartTime | read-only | current | The value of sysUpTime when this Syslog application was started. |
| 1.3.6.1.4.1.11.2.14.14.1.1.2.5 | ScalarhpicfSyslogOperationsLastError | read-only | current | A description of the last error related to sending a Syslog message that was encountered by this Syslog application. If no error has been encountered by this S… |
| 1.3.6.1.4.1.11.2.14.14.1.1.2.6 | ScalarhpicfSyslogOperationsLastErrorTime | read-only | current | The value of sysUpTime when the last error was encountered. If no error has been encountered by this Syslog application since the last re-initialization of the… |
| 1.3.6.1.4.1.11.2.14.14.1.1.2.7 | ScalarhpicfSyslogOperationsCounterDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this Syslog application's counters, viz., counters with OID prefix 'hpicfSyslogO… |
| 1.3.6.1.4.1.11.2.14.14.1.1.2.8 | ScalarhpicfSyslogOperationsStatus | read-only | current | The status of the Syslog application. |
| 1.3.6.1.4.1.11.2.14.14.1.1.3 | NodehpicfSyslogPriority | |||
| 1.3.6.1.4.1.11.2.14.14.1.1.3.1 | ScalarhpicfSyslogPriorityFacility | read-write | current | The facility value of this entry. This value will be returned in all Syslog message, regardless of the process/daemon that originates the message. |
| 1.3.6.1.4.1.11.2.14.14.1.1.3.2 | ScalarhpicfSyslogPrioritySeverity | read-write | current | The severity value of this entry. Used to filter 'event' messages. |
| 1.3.6.1.4.1.11.2.14.14.1.1.3.3 | ScalarhpicfSyslogPriorityDescr | read-write | current | A textual description of this priority entry. |
| 1.3.6.1.4.1.11.2.14.14.1.1.3.4 | ScalarhpicfSyslogSystemModule | read-write | current | A system module value of this entry. Used to filter 'event' messages. |
| 1.3.6.1.4.1.11.2.14.14.1.1.3.5 | ScalarhpicfSyslogOriginId | read-write | current | Specifies the content of a HOSTNAME field in the HEADER of a syslog message. This content can be either an IP address, a hostname or none. A value of (1) indic… |
| 1.3.6.1.4.1.11.2.14.14.1.1.3.6 | ScalarhpicfSyslogPrefixString | read-write | current | A user definable string identifier to be added to the messages. This string could be used by the Syslog management applications or users to classify and group … |
| 1.3.6.1.4.1.11.2.14.14.1.1.4 | NodehpicfSyslogStatistics | |||
| 1.3.6.1.4.1.11.2.14.14.1.1.4.1 | NodehpicfSyslogGeneralStatistics | |||
| 1.3.6.1.4.1.11.2.14.14.1.1.4.1.1 | ScalarhpicfSyslogGeneralLogSent | read-only | current | Number of Syslog messages sent by the Syslog sender. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.1.2 | ScalarhpicfSyslogGeneralLogRecv | read-only | current | Number of Syslog messages received by the Syslog Server. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.1.3 | ScalarhpicfSyslogGeneralLogRelay | read-only | current | The number of messages processed by the Syslog relay. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.1.4 | ScalarhpicfSyslogGeneralSendError | read-only | current | Number of Syslog messages that failed during the send process and this failed message will be buffered for the retransmission process. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.1.5 | ScalarhpicfSyslogGeneralLogResend | read-only | current | Number of Syslog messages re-transmitted successfully. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.1.6 | ScalarhpicfSyslogGeneralResendError | read-only | current | Number of Syslog messages that failed during the retransmission process.The Syslog retransmission will happen if and only if Syslog send failed while transmitt… |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.1.7 | ScalarhpicfSyslogGeneralLogBuffered | read-only | current | Current number of buffered Syslog messages that are ready to be transmitted. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.2 | NodehpicfSyslogSeverityStatistics | |||
| 1.3.6.1.4.1.11.2.14.14.1.1.4.2.1 | TablehpicfSyslogSeverityCounterInfoTable | not-accessible | current | A table containing the Syslog severity statistics counter value. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1 | RowhpicfSyslogSeverityCounterInfoEntry | not-accessible | current | The configuration parameters pertaining to a Syslog severity statistics. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.1 | ColumnhpicfSyslogSeverityTypeIndex | not-accessible | current | The Index that uniquely identifies the Syslog severity type. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.2 | ColumnhpicfSyslogSeverityType | read-only | current | The severity type for all the Syslog messages. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.3 | ColumnhpicfSyslogSeverityCounter | read-only | current | Number of messages transmitted per severity. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.3 | NodehpicfSyslogFacilityStatistics | |||
| 1.3.6.1.4.1.11.2.14.14.1.1.4.3.1 | TablehpicfSyslogFacilityCounterInfoTable | not-accessible | current | A table containing the Syslog facility statistics counter values. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1 | RowhpicfSyslogFacilityCounterInfoEntry | not-accessible | current | The configuration parameters pertaining to a Syslog facility statistics. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.1 | ColumnhpicfSyslogfacilityCounterIndex | not-accessible | current | The Index that uniquely identifies the Syslog facility. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.2 | ColumnhpicfSyslogfacilityType | read-only | current | The facility type for all the Syslog messages. |
| 1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.3 | ColumnhpicfSyslogfacilityCounter | read-only | current | Number of Syslog messages transmitted per facilty. |
| 1.3.6.1.4.1.11.2.14.14.1.1.5 | NodehpicfSyslogLogMsgOptions | |||
| 1.3.6.1.4.1.11.2.14.14.1.1.5.1 | ScalarhpicfSyslogClearLog | read-write | current | Setting this object to TRUE will erase all event log messages. This object always return FALSE when read. |
| 1.3.6.1.4.1.11.2.14.14.1.1.5.2 | ScalarhpicfSyslogSecClearLog | read-write | current | Setting this object to TRUE will erase all security-related log messages. This object always return FALSE when read. |
| 1.3.6.1.4.1.11.2.14.14.1.1.5.3 | ScalarhpicfSyslogCmdClearLog | read-write | current | Setting this object to TRUE will erase all command-related log messages. This object always returns FALSE when it is read. |
| 1.3.6.1.4.1.11.2.14.14.1.1.6 | TablehpicfSyslogServerStatisticsTable | not-accessible | current | A table containing the statistical information pertaining to each Syslog server indexed by hpicfSyslogControlIndex. |
| 1.3.6.1.4.1.11.2.14.14.1.1.6.1 | RowhpicfSyslogServerStatisticsEntry | not-accessible | current | The configuration parameters pertaining to a Syslog application. |
| 1.3.6.1.4.1.11.2.14.14.1.1.6.1.1 | ColumnhpicfSyslogServerLogSent | read-only | current | Number of Syslog messages sent by the Syslog sender. |
| 1.3.6.1.4.1.11.2.14.14.1.1.6.1.2 | ColumnhpicfSyslogServerLogRecv | read-only | current | Number of Syslog messages received by the Syslog Server. |
| 1.3.6.1.4.1.11.2.14.14.1.1.6.1.3 | ColumnhpicfSyslogServerLogRelay | read-only | current | The number of messages processed by the Syslog relay. |
| 1.3.6.1.4.1.11.2.14.14.1.1.6.1.4 | ColumnhpicfSyslogServerSendError | read-only | current | Number of Syslog messages that failed during the send process and this failed message will be buffered for the retransmission process. |
| 1.3.6.1.4.1.11.2.14.14.1.1.6.1.5 | ColumnhpicfSyslogServerLogResend | read-only | current | Number of Syslog messages re-transmitted successfully. |
| 1.3.6.1.4.1.11.2.14.14.1.1.6.1.6 | ColumnhpicfSyslogServerResendError | read-only | current | Number of Syslog messages that failed during the retransmission process.The Syslog retransmission will happen if and only if Syslog send failed while transmitt… |
| 1.3.6.1.4.1.11.2.14.14.1.1.6.1.7 | ColumnhpicfSyslogServerLogBuffered | read-only | current | Current number of buffered Syslog messages that are ready to be transmitted. |
| 1.3.6.1.4.1.11.2.14.14.1.1.7 | NodehpicfSyslogAlerts | |||
| 1.3.6.1.4.1.11.2.14.14.1.1.7.1 | TablehpicfSyslogAlertsTable | not-accessible | current | A table of entries containing configuration information for transmitting alerts in Syslog messages. |
| 1.3.6.1.4.1.11.2.14.14.1.1.7.1.1 | RowhpicfSyslogAlertsEntry | not-accessible | current | An entry in the 'hpicfSyslogAlertsTable'. |
| 1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.1 | ColumnhpicfSyslogAlertIndex | not-accessible | current | The index which uniquely identifies a row in the 'hpicfSyslogAlertsTable'. runningCfgChg - the alert type indicating that a change was made made to the switch'… |
| 1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.2 | ColumnhpicfSyslogAlertAdminStatus | read-write | current | Indicates whether the Syslog application is permitted to generate given type of alerts in transmitted Syslog messages. Default is disabled. |
| 1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.3 | ColumnhpicfSyslogAlertTransmitInterval | read-write | current | Specifies the transmission interval in seconds for sending alerts in Syslog messages. Only one Syslog message is allowed for transmission within this time inte… |
| 1.3.6.1.4.1.11.2.14.14.1.1.8 | NodehpicfSyslogLogging | |||
| 1.3.6.1.4.1.11.2.14.14.1.1.8.1 | ScalarhpicfSyslogCommandLogging | read-write | current | This object is used to configure whether switch should log user entered commands. If this is set, commands are locally logged, else the commands are not logged… |
| 1.3.6.1.4.1.11.2.14.14.1.3 | NodehpicfSyslogConformance | |||
| 1.3.6.1.4.1.11.2.14.14.1.3.1 | NodehpicfSyslogGroups | |||
| 1.3.6.1.4.1.11.2.14.14.1.3.1.1 | GrouphpicfSyslogOperationsGroup | current | A collection of objects providing message related statistics. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.2 | GrouphpicfSyslogControlGroup | current | A collection of objects representing the run time parameters for the Syslog applications. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.3 | GrouphpicfSyslogPriorityGroup | current | A collection of objects representing the priority groupings of hpicfSyslog messages. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.5 | GrouphpicfSyslogNotificationGroup | current | A collection of notifications about the operational state of a Syslog application. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.6 | GrouphpicfSyslogControlGroupOobm | current | A collection of objects representing the run time parameters for the OOBM aware Syslog applications. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.7 | GrouphpicfSyslogGeneralStatisticsGroup | current | A collection of objects representing the general statistics counter information. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.8 | GrouphpicfSyslogSeverityStatisticsGroup | current | A collection of objects representing the severity statistics counter information. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.9 | GrouphpicfSyslogFacilityStatisticsGroup | current | A collection of objects representing the facility statistics counter information. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.10 | GrouphpicfSyslogControlGroupSmm | current | A collection of objects representing the log message for the standby module. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.11 | GrouphpicfSyslogLogMsgOptionsGroup | deprecated | A collection of objects representing the log message information. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.12 | GrouphpicfSyslogControlTransportGroup | current | A collection of objects representing the run time parameters for the transport applications. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.13 | GrouphpicfSyslogServerStatisticsGroup | current | A collection of objects representing the server specific statistics counter information. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.14 | GrouphpicfSyslogPriorityGroup1 | current | A collection of object for Syslog priority. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.15 | GrouphpicfSyslogAlertsGroup | current | A collection of objects representing Syslog alerts information. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.16 | GrouphpicfSyslogOriginIdGroup1 | current | An object for syslog origin ID. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.17 | GrouphpicfSyslogLogMsgOptionsGroup1 | deprecated | A collection of objects representing the log message information. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.18 | GrouphpicfSyslogCommandLoggingGroup1 | deprecated | A collection of objects for local command logging. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.19 | GrouphpicfSyslogLogMsgOptionsGroup2 | current | A collection of objects representing the log message information. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.20 | GrouphpicfSyslogControlFilterNameGroup | current | Objects representing the filter name. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.1.23 | GrouphpicfSyslogPrefixStringGroup1 | current | Object representing the prefix string. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2 | NodehpicfSyslogCompliances | |||
| 1.3.6.1.4.1.11.2.14.14.1.3.2.1 | CompliancehpicfSyslogFullCompliance1 | current | The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects and notifications. Such an implementation can be bo… | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.2 | CompliancehpicfSyslogFullCompliance2 | current | The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects. Such an implementation can be both monitored and c… | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.4 | CompliancehpicfSyslogReadOnlyCompliance1 | read-only | current | The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). It can also send notifi… |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.5 | CompliancehpicfSyslogReadOnlyCompliance2 | read-only | current | The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.7 | CompliancehpicfSyslogNotificationCompliance | current | The compliance statement for SNMP entities which implement the SYSLOG-MIB and support only notifications about change in the operational status of a Syslog app… | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.8 | CompliancehpicfSyslogFullComplianceOobm | current | The compliance statement for Syslog server configuration with support for OOBM. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.9 | CompliancehpicfSyslogStatisticsCompliance | current | The compliance statement for SNMP entities which implement the Syslog statistics. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.10 | CompliancehpicfSyslogSmmLogMsgCompliance | deprecated | The compliance statement for Syslog log messages for standby module. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.11 | CompliancehpicfSyslogTransportCompliance | current | The compliance statement for Syslog transport . | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.12 | CompliancehpicfSyslogPriorityCompliance | current | The compliance statement for Syslog priority . | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.13 | CompliancehpicfSyslogServerStatisticsCompliance | current | The compliance statement for syslog server statistics . | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.14 | CompliancehpicfSyslogAlertsCompliance | current | The compliance statement for Syslog alerts. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.15 | CompliancehpicfSyslogOriginIdCompliance | current | The compliance statement for syslog origin id. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.16 | CompliancehpicfSyslogSmmLogMsgCompliance1 | deprecated | The compliance statement for Syslog log messages for standby module. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.17 | CompliancehpicfSyslogCommandLoggingCompliance | deprecated | The compliance statement for Syslog command logging . | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.18 | CompliancehpicfSyslogSmmLogMsgCompliance2 | current | The compliance statement for Syslog log messages for standby module. | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.19 | CompliancehpicfSyslogTransportFilterNameCompliance | current | The compliance statement for Syslog Filter Name . | |
| 1.3.6.1.4.1.11.2.14.14.1.3.2.22 | CompliancehpicfSyslogPrefixStringCompliance | current | The compliance statement for Syslog Prefix String. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HpicfSyslogFacility | INTEGER { kern (0), user (1), mail (2), daemon (3), auth (4), syslog (5), lpr (6), news (7), uucp (8), sys9 (9), sys10 (10), sys11 (11), sys12 (12), sys13 (13), sys14 (14), cron (15), local0 (16), local1 (17), local2 (18), local3 (19), local4 (20), local5 (21), local6 (22), local7 (23) } | current | This textual convention enumerates the facility of a Syslog application. |
| HpicfSyslogOriginId | INTEGER { ip-address (1), hostname (2), none (3) } | current | This textual convention enumerates the origin identifier of syslog message. |
| HpicfSyslogSeverity | INTEGER { major (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), debug (7) } | current | This textual convention enumerates the severity of a Syslog application. |
| HpicfSyslogSystemModule | INTEGER { all-pass (0), vlan (1), ip (2), igmp (3), ipx (4), stp (5), system (6), chassis (7), console (8), ports (9), dhcp (10), download (11), tcp (12), telnet (13), timep (14), tftp (15), xmodem (16), update (17), mgr (18), bridge (19), snmp (20), addrmgr (21), agp (22), fault (23), ldbal (24), garp (25), gvrp (26), cos (27), lacp (28), dhcpr (29), stack (30), dma (31), sntp (32), ieee8021x (33), cdp (34), auth (35), tacacs (36), radius (37), ssh (38), netinet (39), ospf (40), xrrp (41), ssl (42), ipaddrmgr (43), macauth (44), kms (45), pim (46), maclock (47), acl (48), udpf (49), inst-mon (50), udld (51), hpesp (52), lldp (53), connfilt (54), ratelim (55), idm (56), iplock (57), dhcp-snoop (58), vrrp (59), usb (60), licensing (61), loop-protect (62), sflow (63), arp-protect (64), dhcpv6c (65), mtm (66), mld (67), dca (68), qinq (69), autorun (70), ffi (71), wsm (72), dipld (73), hpsm (74), srcip (75), policy (76), oobm (77), trmode (78), ospf3 (79), dhcpv6r (80), bgp (81), ufd (82), fips (83), dt (84), dcbx (85), sftp (86), stacking (87), rfs (88), testmode (89), crypto (90), slp (91), ra-guard (92), ecm (93), hpespip (94), mobility-agent (95), securemode (96), mSatProxy (97), eSatProxy (98), hpespcm (99), openflow (100), smart-link (101), insysprog (102), dhcp-server (103), job (104), dsnoopv6 (105), dipldv6 (106), servicetunnel (107), tr069 (108), http (109), vxlantunnel (110), bpdu (111), byod-redirect (112), dldp (113), macsec (114), acct (115), tls (116), ripng (117), arpthrottle (120), ndsnoop (122), ntp (123), ipsla (124), psDetect (125), mdns (126), mvrp (127), rip (128), bfd (129), lldpmad (130), captive-portal (131), profile-manager (132), vsf (133), tunneledNode (134), amp-server (135), activate (136), central (137), ztpIpsec (138), greTunnel (139), userTnode (140), vlanMad (141), cfgRestore (143), devOnboard (144), httpProxy (145), dfp (146), authOrder (147), caDownload (148), estc (149) } | current | This textual convention enumerates the system module (subsystem) of a Syslog application. |