HP-ICF-USER-PROFILE-MIB
79 objects
This MIB module contains the definitions of Managed Objects for user access profiles.
Imported Objects
| CONFIG-MIB | HpicfUsrProfilePortSpeed |
| HP-ICF-OID | hpicfCommonSecurity |
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.12.1 | IdentityhpicfUsrProfileMIB | This MIB module contains the definitions of Managed Objects for user access profiles. | ||
| 1.3.6.1.4.1.11.2.14.11.1.12.1.0 | NodehpicfUsrProfileCapability | |||
| 1.3.6.1.4.1.11.2.14.11.1.12.1.0.1 | ScalarhpicfUsrProfileCapabilityByPortMap | read-only | current | A string of octets containing on bit per access profile primitive as follows: bit 0 - PVID/native/untagged ingress VLAN bit 1 - Tagged Egress VLAN bit 2 - Ingr… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.0.2 | ScalarhpicfUsrProfileCapabilityByUserMap | read-only | current | A string of octets containing one bit per access profile primitive as follows: bit 0 - PVID/native/untagged ingress VLAN bit 1 - Tagged Egress VLAN bit 2 - Ing… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1 | NodehpicfUsrProfileConfig | |||
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.1 | TablehpicfUsrProfileConfigFilterListTable | not-accessible | current | A table that contains configuration objects for filter lists. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1 | RowhpicfUsrProfileConfigFilterListEntry | not-accessible | current | The configuration information for a user's filtering profile. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1.1 | ColumnhpicfUsrProfileFilterListIndex | not-accessible | current | The identifier used to select a list of filter rules. A filter list entry must be created before a filter rule entry can be added. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1.2 | ColumnhpicfUsrProfileConfigFilterListRowStatus | read-create | current | This object indicates the status of this entry. Must NOT be active in order to modify an hpicfUsrProfileConfigFilterRuleEntry that is indexed on this entry's h… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1.3 | ColumnhpicfUsrProfileConfigNasRulesIpv6 | read-create | current | Setting this attribute to enabled(1) enables the usage of IPv6 destinations in ACEs. When set to disabled(2) any implicit IP destinations will be translated as… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2 | TablehpicfUsrProfileConfigFilterRuleTable | not-accessible | current | A table that contains configuration objects for filter lists. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1 | RowhpicfUsrProfileConfigFilterRuleEntry | not-accessible | current | The configuration information for a user's filtering profile. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.1 | ColumnhpicfUsrProfileFilterRuleListIndex | not-accessible | current | The identifier used to select a list of filter rules. This filter rule list index must correspond to a created but not active filter list index in order for a … |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.2 | ColumnhpicfUsrProfileFilterRuleIndex | not-accessible | current | A numeric value assigned to each rule within a list belong to the same hpicfUsrProfileFilterListIndex. Rules within a given list will be evaluated in ascending… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.3 | ColumnhpicfUsrProfileConfigFilterRule | read-create | current | Specifies a single filter rule using the same syntax used for the hp-nas-filter-rule RADIUS attribute. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.4 | ColumnhpicfUsrProfileConfigFilterRuleRowStatus | read-create | current | This object indicates the status of this entry. Must NOT be active in order to modify an hpicfUsrProfileConfigFilterRuleEntry. However, if an hpicfUsrProfileCo… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3 | TablehpicfUsrProfileConfigTable | not-accessible | current | A table that contains configuration objects for access profiles. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1 | RowhpicfUsrProfileConfigEntry | not-accessible | current | The configuration information for an access profile. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.1 | ColumnhpicfUsrProfileConfigIndex | not-accessible | current | A unique numeric value assigned to each access profile in this table. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.2 | ColumnhpicfUsrProfileConfigPvid | read-create | current | Specifies the port VID (PVID), also known, as native VLAN to be used with this access profile. To specify no pvid, set value to 4095, not 0. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.3 | ColumnhpicfUsrProfileConfigPvidEnable | read-create | current | Setting this attribute TRUE enables the usage of 'hpicfUsrProfilePvid' when this access profile is active. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.4 | ColumnhpicfUsrProfileConfigTaggedEgressVlanMap1k | read-create | current | A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 0 through 1023. The first octet corresponds to VLANs with 'VlanIndex' value… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.5 | ColumnhpicfUsrProfileConfigTaggedEgressVlanMap2k | read-create | current | A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 1024 through 2047. The first octet corresponds to VLANs with 'VlanIndex' va… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.6 | ColumnhpicfUsrProfileConfigTaggedEgressVlanMap3k | read-create | current | A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 2048 through 3071. The first octet corresponds to VLANs with 'VlanIndex' va… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.7 | ColumnhpicfUsrProfileConfigTaggedEgressVlanMap4k | read-create | current | A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 3072 through 4095. The first octet corresponds to VLANs with 'VlanIndex' va… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.8 | ColumnhpicfUsrProfileConfigTaggedEgressVlanEnable | read-create | current | Setting this attribute TRUE enables the usage of 'hpicfUsrProfileTaggedVlanMapXXX' when this access profile is being enforced. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.9 | ColumnhpicfUsrProfileConfigIngressVlanFilterEnable | read-create | current | Setting this attribute TRUE causes the system to only allow ingress traffic from those VLANs on which egress traffic is permitted. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.10 | ColumnhpicfUsrProfileConfigPriorityRegenTable | read-create | current | Specifies the IEEE 802 priority regeneration table for this access profile. Syntax of octet string is same as for 'User-Priority-Table' RADIUS attribute as def… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.11 | ColumnhpicfUsrProfileConfigPriorityRegenTableEnable | read-create | current | Setting this attribute TRUE enables the usage of the 'hpicfUsrProfilePriorityRegenTable' when this access profile is active. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.12 | ColumnhpicfUsrProfileConfigMaxIngressBandwidth | read-create | current | Specifies the maximum ingress bandwidth for this access profile. Bandwidth value is specified in Kbps. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.13 | ColumnhpicfUsrProfileConfigMaxIngressBandwidthEnable | read-create | current | Setting this attribute TRUE enables the usage of the 'hpicfUsrProfileMaxIngressBandwidth' when this access profile is active. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.14 | ColumnhpicfUsrProfileConfigMaxEgressBandwidth | read-create | current | Specifies the maximum egress bandwidth for this access profile. Bandwidth value is specified in Kbps. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.15 | ColumnhpicfUsrProfileConfigMaxEgressBandwidthEnable | read-create | current | Setting this attribute TRUE enables the usage of 'hpicfUsrProfileMaxEgressBandwidth' when this access profile is active. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.16 | ColumnhpicfUsrProfileConfigFilterListIndex | read-create | current | Selects the filter from 'hpicfUsrProfileConfigFilterTable' to associate with this access profile. The rowStatus of the filter must be in an active state. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.17 | ColumnhpicfUsrProfileConfigFilterListEnable | read-create | current | Setting this attribute TRUE enables the usage of 'hpicfUsrProfileConfigFilterListIndex' when this access profile is active. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.18 | ColumnhpicfUsrProfileConfigEntryRowStatus | read-create | current | This object indicates the status of this entry. Must NOT be active in order to change some other column of this config entry. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4 | TablehpicfUsrProfileConfigBindTable | not-accessible | current | A table that contains configuration objects for the access profile-to-user bindings. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1 | RowhpicfUsrProfileConfigBindEntry | not-accessible | current | The configuration information for a access profile-to-user binding. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.1 | ColumnhpicfUsrProfileUserPortNumber | not-accessible | current | The interface index associated with this user. On wired HP products, the interface index is the physical port. On wireless products it is the instance (whether… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.2 | ColumnhpicfUsrProfileUserMacAddr | not-accessible | current | The 48-bit IEEE media access control address of the user. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.3 | ColumnhpicfUsrProfileSelector | read-create | current | Setting this attribute to a value between 1 and 16384 selects an access profile from 'hpicfUsrProfileConfigTable' to apply to the user. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.4 | ColumnhpicfUsrProfileConfigBindEntryRowStatus | read-create | current | This object indicates the status of this entry. Must NOT be active in order to change some other column of this bind entry. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.5 | ScalarhpicfUsrProfileConfigConflictResolveQoS | read-write | current | This object controls how a device behaves when QoS conflicts arise. A conflict can arise if a device only supports the QoS access primitive on a per-port basis… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.6 | ScalarhpicfUsrProfileConfigConflictResolveMaxIngressBandwidth | read-write | current | This object controls how a device behaves when ingress BW conflicts arise. A conflict can arise if a device only supports the ingress BW access primitive on a … |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.1.7 | ScalarhpicfUsrProfileConfigConflictResolveMaxEgressBandwidth | read-write | current | This object controls how a device behaves when egress BW conflicts arise. A conflict can arise if a device only supports the egress BW access primitive on a pe… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2 | NodehpicfUsrProfileStats | |||
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.1 | ScalarhpicfUsrProfileLastUpdate | read-only | current | A snapshot of the module sysUpTime at the time of the last update to the access profiles in effect. A value of 0 indicates that the hpicfUsrProfileLastUpdate o… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.2 | TablehpicfUsrProfileStatsFilterTable | not-accessible | current | A table that contains statistic objects for filter lists. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1 | RowhpicfUsrProfileStatsFilterEntry | not-accessible | current | Statistic information for a user's filtering profile. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1.1 | ColumnhpicfUsrProfileStatsFilterRule | read-only | current | Specifies a single filter rule using the same syntax used for the hp-nas-filter-rule RADIUS attribute. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1.2 | ColumnhpicfUsrProfileStatsFilterRuleHitCount | read-only | current | Specifies the number of times (hit count) the user's traffic has matched this rule. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1.3 | ColumnhpicfUsrProfileStatsFilterRuleHitCountEnabled | read-only | current | When this attribute is TRUE it signifies the 'hpicfUsrProfileStatsFilterRuleHitCount' contains a valid value. A FALSE value signifies it does not contain a val… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3 | TablehpicfUsrProfileStatsTable | not-accessible | current | This table describes the access profiles currently in effect. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1 | RowhpicfUsrProfileStatsEntry | not-accessible | current | An entry in the user access profile table. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.1 | ColumnhpicfUsrProfileStatsPvid | read-only | current | Active port VID (PVID) for this user. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.2 | ColumnhpicfUsrProfileStatsTaggedEgressVlanMap1k | read-only | current | A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 0 through 1023. The first octet corresponds to VLANs with 'VlanIndex' value… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.3 | ColumnhpicfUsrProfileStatsTaggedEgressVlanMap2k | read-only | current | A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 1024 through 2047. The first octet corresponds to VLANs with 'VlanIndex' va… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.4 | ColumnhpicfUsrProfileStatsTaggedEgressVlanMap3k | read-only | current | A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 2048 through 3071. The first octet corresponds to VLANs with 'VlanIndex' va… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.5 | ColumnhpicfUsrProfileStatsTaggedEgressVlanMap4k | read-only | current | A string of octets containing one bit per VLAN for VLANS with 'VlanIndex' values of 3072 through 4095. The first octet corresponds to VLANs with 'VlanIndex' va… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.6 | ColumnhpicfUsrProfileStatsIngressVlanFilterEnable | read-only | current | When this attribute is TRUE causes the system is only allowing ingress traffic from those VLANs on which egress traffic is permitted. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.7 | ColumnhpicfUsrProfileStatsPriorityRegenTable | read-only | current | Specifies the IEEE 802 priority regeneration table active for this access profile. Syntax of octet string is same as for 'User-Priority-Table' RADIUS attribute… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.8 | ColumnhpicfUsrProfileStatsMaxIngressBandwidth | read-only | current | Specifies the maximum ingress bandwidth for this access profile. Bandwidth value is specified in Kbps. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.9 | ColumnhpicfUsrProfileStatsMaxEgressBandwidth | read-only | current | Specifies the maximum egress bandwidth for this access profile. Bandwidth value is specified in Kbps. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.10 | ColumnhpicfUsrProfileStatsFilterListIndex | read-only | current | A value of 0 indicates that no filter rule set is active for the user. A value between 1 and 16384 selects the active filter rule set from 'hpicfUsrProfileStat… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.11 | ColumnhpicfUsrProfileStatsAccessMode | read-only | current | Indicates whether profile was applied via SNMP or via RADIUS. Application by SNMP has precedence over RADIUS. Where there are no attribute conflicts, profile a… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.12 | ColumnhpicfUsrProfilePortSpeedOverRidden | read-only | current | When this attribute is TRUE it signifies the 'hpicfUsrProfileStatsPortSpeedVSA' is a RADIUS over-ridden. A FALSE value signifies it is not RADIUS over-ridden v… |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.13 | ColumnhpicfUsrProfileStatsPortSpeedVSA | read-only | current | This attribute signifies at what speed the port is operating at. |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3 | NodehpicfUsrProfileConformance | |||
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1 | NodehpicfUsrProfileGroup | |||
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.1 | GrouphpicfUsrProfileCapabilityGroup | current | A collection of objects providing device capability information for user access profiles. | |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.2 | GrouphpicfUsrProfileConfigGroup | current | A collection of objects providing configuration of user access profiles. | |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.3 | GrouphpicfUsrProfileStatsGroup | deprecated | A collection of objects providing statistics of user access profiles. | |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.4 | GrouphpicfUsrProfileConfigGroup2 | current | A collection of objects providing configuration of user access profiles. | |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.5 | GrouphpicfUsrProfileStatsGroup1 | current | A collection of objects providing statistics of user access profiles. | |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.2 | NodehpicfUsrProfileCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.2.1 | CompliancehpicfUsrProfileCompliance | deprecated | The compliance statement for devices support of HP-USER-PROFILE-MIB. | |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.2.2 | CompliancehpicfUsrProfileCompliance2 | deprecated | The compliance statement for devices support of HP-USER-PROFILE-MIB. | |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.2.3 | CompliancehpicfUsrProfileCompliance3 | current | The compliance statement for devices support of HP-USER-PROFILE-MIB. | |
| 1.3.6.1.4.1.11.2.14.11.1.12.1.3.2.4 | CompliancehpicfUsrProfileCompliance4 | current | The compliance statement for devices support of HP-USER-PROFILE-MIB. |