HP-LASERJET-COMMON-MIB
1577 objects
Objects used in HP JetDirect Print Servers
Imported Objects
| SNMPv2-SMI | enterprises |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Identityhp | Objects used in HP JetDirect Print Servers | ||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.3 | Nodehpsystem | |||
| 1.3.6.1.4.1.11.2.3.9 | Nodenet-peripheral | |||
| 1.3.6.1.4.1.11.2.3.9.1 | Nodenet-printer | |||
| 1.3.6.1.4.1.11.2.3.9.1.1 | NodegeneralDeviceStatus | |||
| 1.3.6.1.4.1.11.2.3.9.1.1.1 | ScalargdStatusBytes | read-only | current | The number of valid bytes in the gdStatusEntry array. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2 | NodegdStatusEntry | |||
| 1.3.6.1.4.1.11.2.3.9.1.1.2.1 | ScalargdStatusLineState | read-only | current | This describes the line state of the peripheral. When non-zero, the peripheral is off-line. When zero the peripheral is on-line. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.2 | ScalargdStatusPaperState | read-only | current | This describes the state of the paper on the peripheral. When non-zero, the peripheral has a paper problem. When zero, the peripheral does not have a paper pro… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.3 | ScalargdStatusInterventionState | read-only | current | This describes the intervention state of the peripheral. When non-zero, the peripheral requires human intervention to continue working. When zero, it requires … |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.4 | ScalargdStatusNewMode | read-only | obsolete | This indicates to which read channel state the card should move. When non-zero, the card should indicate that the read channel is idle. When zero, the card sho… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.5 | ScalargdStatusConnectionTerminationAck | read-only | obsolete | This indicates whether the peripheral is waiting for the Connection termination ACK. When non-zero, it is waiting. When zero, it is not waiting. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.6 | ScalargdStatusPeripheralError | read-only | current | This is the error code from the peripheral. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.8 | ScalargdStatusPaperOut | read-only | current | This indicates that the peripheral is out of paper. off (0), paper-out-or-paper-mount (1), manual-paper-feed-needed (2) For some peripherals, such as the HP La… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.9 | ScalargdStatusPaperJam | read-only | current | This indicates that the peripheral has a paper jam. off (0), paper-jam(1) For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, … |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.10 | ScalargdStatusTonerLow | read-only | current | This indicates that the peripheral has a low toner condition. off (0), toner-low (1), no-toner-cartridge (2) For some peripherals, such as the HP LaserJet IIIS… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.11 | ScalargdStatusPagePunt | read-only | current | This indicates that the peripheral did not receive data fast enough to keep up with the print engine when generating a page. For some peripherals, such as the … |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.12 | ScalargdStatusMemoryOut | read-only | current | This indicates that the peripheral did not have enough memory to render an image on a page. For some peripherals, such as the HP LaserJet IIISi printer or HP D… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.13 | ScalargdStatusIoActive | read-only | current | This indicates that the peripheral is processing data from this I/O interface card. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.14 | ScalargdStatusBusy | read-only | current | This indicates that the peripheral is busy processing print/plot data. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, thi… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.15 | ScalargdStatusWait | read-only | current | This indicates that the peripheral is waiting for print/plot data to process. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plott… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.16 | ScalargdStatusInitialize | read-only | current | This indicates that the peripheral is initializing or warming up. off (0), initializing (1), warm-up(2) For some peripherals, such as the HP LaserJet IIISi pri… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.17 | ScalargdStatusDoorOpen | read-only | current | This indicates that the peripheral cover or door is open. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this value is al… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.18 | ScalargdStatusPrinting | read-only | current | This indicates that the peripheral is printing or otherwise marking or moving paper. off (0), ordinary-page (1), test-fonts-config-or-start-page (2) For some p… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.19 | ScalargdStatusPaperOutput | read-only | current | This indicates that the peripheral has a paper output problem such as the output storage bin being full. off (0), output-storage-full (1) For some peripherals,… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.20 | ScalargdStatusReserved | read-only | obsolete | This is the reserved area that is not currently used, but will allow for growth within the gdStatusEntry table. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.21 | ScalargdStatusNovBusy | read-only | obsolete | This indicates if this channel is active. If the value is 0 then this channel is active or the peripheral is idle. If this value is non-zero then another chann… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.22 | ScalargdStatusLlcBusy | read-only | obsolete | This indicates if this channel is active. If the value is 0 then this channel is active or the peripheral is idle. If this value is non-zero then another chann… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.23 | ScalargdStatusTcpBusy | read-only | obsolete | This indicates if this channel is active. If the value is 0 then this channel is active or the peripheral is idle. If this value is non-zero then another chann… |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.24 | ScalargdStatusAtBusy | read-only | obsolete | This indicates if this channel is active. If the value is 0 then this channel is active or the peripheral is idle. If this value is non-zero then another chann… |
| 1.3.6.1.4.1.11.2.3.9.1.1.3 | ScalargdStatusDisplay | read-only | current | The string diplayed on the peripheral front panel. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this is always a zero l… |
| 1.3.6.1.4.1.11.2.3.9.1.1.4 | ScalargdStatusJobName | read-only | current | The current job name set by the peripheral. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this is always a zero length s… |
| 1.3.6.1.4.1.11.2.3.9.1.1.5 | ScalargdStatusSource | read-only | current | A string indicating the name of the physical port or protocol the printer is currently getting data from. |
| 1.3.6.1.4.1.11.2.3.9.1.1.6 | ScalargdStatusPapstatus | read-only | current | A string indicating the Appletalk papstatus response. |
| 1.3.6.1.4.1.11.2.3.9.1.1.7 | ScalargdStatusId | read-only | current | A formatted string describing this peripheral. |
| 1.3.6.1.4.1.11.2.3.9.1.1.8 | ScalargdStatusDisplayCode | read-only | obsolete | This is the display code that the peripheral uses to tell the card what type of display the front panel of the printer is. Starting with firmware release X.20.… |
| 1.3.6.1.4.1.11.2.3.9.1.1.9 | ScalargdStatusNlsCode | read-only | current | This value is the representation of what native language the printer is in currently. |
| 1.3.6.1.4.1.11.2.3.9.1.1.10 | ScalargdStatusJobTimeout | read-write | obsolete | This value represents (in seconds) the maximum time of inactivity which must elapse before the JetDirect card switches from the current network protocol to ano… |
| 1.3.6.1.4.1.11.2.3.9.1.1.11 | ScalargdStatusPjlUstatus | read-write | obsolete | This object will enable/disable PJL ustatus. disabled (0), enabled (1) |
| 1.3.6.1.4.1.11.2.3.9.1.1.12 | ScalargdStatusLaaSupport | read-write | current | |
| 1.3.6.1.4.1.11.2.3.9.1.1.13 | ScalargdPasswords | read-write | current | This object is used as a 256 byte NVRAM area for JetAdmin. It is completely managed by JetAdmin. Initially it is initialized to all zeros. A coldboot will re-i… |
| 1.3.6.1.4.1.11.2.3.9.1.1.18 | ScalargdStatusAtPrinterName | read-write | current | The AppleTalk name of the printer. |
| 1.3.6.1.4.1.11.2.3.9.1.1.19 | ScalargdStatusAtPrinterType | read-only | obsolete | The AppleTalk type of the printer. |
| 1.3.6.1.4.1.11.2.3.9.1.2 | NodenetPrinterType | |||
| 1.3.6.1.4.1.11.2.3.9.4 | Nodenetdm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2 | Nodedm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodedevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | Nodedevice-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1 | Nodesettings-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1 | Scalarenergy-star | read-write | current | Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 | Scalarsleep-mode | read-write | current | Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.8 | Scalarcontrol-panel-lock | read-write | current | Device control panel lock. A value of eDisabled means the control panel is unlocked and the device's configuration can be modified from the control panel. A va… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.9 | Scalarservice-password | read-write | current | When set to the password value, other service related objects become 'visible' (i.e readable) and/or become writable. When written with any other value, the se… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.11 | Scalardevice-cfg-download | read-write | current | Handshaking mechanism between host and device to coordinate the download of device specific data. eCfgDownloadIdle - indicates device configuration download ac… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.12 | Scalardevice-cfg-download-data-type | read-write | current | Indicates the type of device specific data to be downloaded. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.13 | Scalardevice-cfg-upload | read-write | current | Handshaking mechanism between host and device to coordinate the upload of device specific data. eCfgUploadIdle - indicates device configuration upload activity… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.14 | Scalardevice-cfg-upload-data-type | read-write | current | Indicates the type of device specific data to be uploaded. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.17 | Scalardownload-timeout | read-write | current | Specifies the number of seconds that device will wait for data from the host before the device determines the host is being unresponsive. This timeout conditio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.18 | Scalarupload-timeout | read-write | current | Specifies the number of seconds that device will wait for response from the host after transmitting a unit of data before the device determines the host is bei… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.21 | Scalarrun-location | read-write | current | Returns or changes the location from which code executes. The object allows the user to pick a memory bank to run code from which is different than the default… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.22 | Scalardate-display | read-write | current | Controls front-panel date display format. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.23 | Scalardevice-cfg-param-command | read-write | current | A C structure containing the following fields: typedef struct { u8bit list_id; s8bit auto_incr; u16bit max_index; u16bit rec_size; u16bit index; u8bit data[]; … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.24 | Scalarcopier-token | read-write | current | Provides an advisory locking mechanism for hosts to coordinate exclusive access to a copier device. Setting the object to a unique id will only succeed if the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.26 | Scalarfax-upload-token | read-write | current | Provides an advisory locking mechanism for hosts to coordinate exclusive access to the fax upload features of a device. Setting the object to a unique id will … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.27 | Scalarfax-download-token | read-write | current | Provides an advisory locking mechanism for hosts to coordinate exclusive access to the fax download features of a device. Setting the object to a unique id wil… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.28 | Scalardevice-config-token | read-write | current | Provides an advisory locking mechanism for hosts to coordinate exclusive access to a specific device or subset of device capabilities. Setting the object to a … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.31 | Scalarmono-color-switching-mode | read-write | current | This object allows the user to view/change the color/mono switching mode for a device. Additional information: This object allows the user to view/change the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32 | Nodedevice-configure | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.5 | Scalardevice-configure-print-engine-speed | read-write | current | Return or set the value of the print engine speed. Where eNormal is the default speed and with each eSlowDownN setting the printer gets progressively slower th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.8 | Scalardevice-configure-duplexer-enabled | read-write | current | Return or set the value for the duplexer installed. eEnabled = The duplexer is installed. eDisabled = The duplexer is not installed. Additional information: Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.10 | Scalardevice-configure-generic-language-prompt | read-write | current | This object is used to determine whether to prompt the user to enter the appropriate language. Additional information: This object is used to determine whether… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.11 | Scalardevice-configure-generic-country-prompt | read-write | current | This object is used to determine whether to prompt the user to enter the appropriate country at boot. Additional information: This object is used to determine … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.16 | Scalardevice-configure-generic-country | read-write | current | Set the location configuration for the device. This affects parameters that vary per region like the default paper size, symbol set, supply reorder URL, and fa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.17 | Scalardevice-configure-secure-nvram-items | read-write | current | This object is used to configure product settings that are stored in secure area of nvram. The object consists of a 16-bit variable in secure nvram. Bits 15-8 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.18 | Scalardevice-configure-cpe-feature | read-write | current | This object allows CPE to enable specific bug fixes or enhancements in post-release products. Additional information: This object allows CPE to enable specific… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.19 | Scalardevice-configure-custom-product-number | read-only | current | This object allows manufacturing to change the product number to a pre-defined alternate after release. This feature will allow manufacturing to assign unique … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.32.20 | Scalardevice-configure-preferred-boot-localization-language | read-write | current | Preferred localization language used by the device at boot up time. Setting this object will instruct the device to boot up in that language. Setting this lang… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.47 | Scalarcontrol-panel-button-press-delay | read-write | current | This object gives the number of seconds to wait before simulating the button press when CONTROL-PANEL-BUTTON-PRESS is next called. Additional information: This… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.49 | Scalarlow-power | read-write | current | Returns or changes the Auto Low Power sleep value. The device will go into energy saving Auto Low Power mode after the print engine has been idle for the numbe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.53 | Scalarfuser-pressure-release | read-write | current | This object is used to disengage the pressure on the fuser to prevent roller marks on the fuser, which can occur when the pressure is engaged for long periods … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.73 | Scalarcontrol-panel-display-contrast | read-write | current | This object returns or sets the display contrast setting if the control panel has a display and it supports contrast adjustment. The setting Is stored in NVRAM… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.85 | Scalarcalibration-lowspeed-enable | read-write | current | Enable or disable an optional low speed calibration. This calibration will allow the device to obtain accurate data for use with low speed print modes. Additio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.99 | Scalarstart-engine-early-warmup | read-write | current | This PML object is used by HP SW drivers to signal the printer that a job is coming, and to start the warm-up process early.The effect of warming up early will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.101 | Scalarenable-engine-early-warmup | read-write | current | This PML object is used by HP SW to enable/disable the printer to send the signal of warm-up process early to engine. The effect of warming up early will reduc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2 | Nodestatus-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.1 | Scalarlocalization-language | read-only | current | Localization language used by the device for device generated PML strings, control panel messages, and text contained in any of the printer generated printed p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.2 | Scalarnot-ready-printer | read-only | current | Indicates if any of the sub-systems in the printer are not ready. A sub-system is not ready if the sub-system is unable to perform its function until some sort… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.3 | Scalarnot-ready-controller | read-only | current | Indicates if the hardware controller sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the hardware c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.4 | Scalarnot-idle | read-only | current | Indicates if any of the sub-systems in the device are not idle. The I/O source sub-system is considered not idle if there is unprocessed PDL data in the device… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.5 | Scalaron-off-line | read-write | current | To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off lin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.6 | Scalarcontinue | read-write | current | A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a continue event to occur before… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.7 | Scalarauto-continue | read-write | current | Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the device will automatically gene… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | Scalarinstall-date | read-write | current | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the month (1-12). DD is the day … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.12 | Scalaruser-nvram-reset | read-write | current | Setting to eTrue causes all user NVRAM settings to factory default settings. May also perform POWER-ON- RESET functionality thus loosing print job data. The PO… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 | Scalardate-and-time | read-write | current | A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte day; /* day: 1 to 31 */ uby… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20 | Nodedisplay | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1 | Nodedisplay-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1.1 | Scalardisplay-column-size | read-only | current | Indicates the number of characters displayable on each row of the printer's display. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1.2 | Scalardisplay-number-of-rows | read-only | current | Indicates the number of rows displayable on the printer's display. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.1.3 | Scalarshow-address | read-write | current | If this object is set to eAuto, and the device has an IP address, the IP address of the device will be shown with the READY message. If this object is set to e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.2 | Nodestatus-message | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.2.1 | Nodestatus-message1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.20.2.1.1 | Scalarstatus-msg-line1-part1 | read-only | current | First part of the first line of the printer's status message. Additional information: In the Offline state, device only returns 00 OFFLINE and not the actual c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.21 | Scalartotal-ram-size | read-only | current | Identifies total amount of RAM, in bytes, available to the controller for general computing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.22 | Scalarstatus-printer | read-only | current | Indicates if any of the sub-systems in the device in a warning condition. A warning condition exists if the sub-system is useable, but not at its highest state… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.23 | Scalarstatus-controller | read-only | current | Indicates if the hardware controller sub-system in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.28 | Scalartime-display | read-write | current | Controls front-panel time display format. Set to eTimeDisplayTwelveHour for AM/PM display. Set to eTimeDisplayTwentyFourHour for military-type display. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.35 | Scalarjob-input-auto-continue-timeout | read-write | current | The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.36 | Scalarjob-input-auto-continue-mode | read-write | current | Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. The device POS should explain w… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37 | Nodebackground-message | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.1 | Nodebackground-message1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.1.1 | Scalarbackground-status-msg-line1-part1 | read-write | current | The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.2 | Nodebackground-message2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.37.2.1 | Scalarbackground-status-msg-line2-part1 | read-write | current | The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.38 | Scalarerror-log-clear | read-write | current | Setting this object clears all the entries in the error log sub-tree. Additional information: Setting this object removes all errors that have been stored in t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.40 | Scalarjob-output-auto-continue-timeout | read-write | current | Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet of media to that output bin. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.42 | Scalarcollated-originals-support | read-only | current | Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability. cCollatedOriginals - The prin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.43 | Scalardevice-cfg-download-error | read-only | current | Error status of the configuration download session. POS should indicate the actual error values reserving value 0 as NO ERROR. Additional information: A value … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.45 | Scalardevice-cfg-upload-error | read-only | current | Error status of the configuration upload session. POS should indicate the actual error values reserving value 0 as NO ERROR. Additional information: A value of… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.52 | Scalarlocalization-languages-supported | read-only | current | The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639, each separated by a comma cha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.53 | Scalarlocalization-countries-supported | read-only | current | The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166, each separated by a comma ch… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.59 | Scalarhost-application-available-memory | read-only | current | Returns the amount of memory, in bytes, that the device has available for job-related processing or resources. Also known as driver work space (DWS) memory. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.60 | Scalarcontrol-panel-button-press | read-write | current | Writing this object simulates pressing a button on the control panel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.65 | Nodecontrol-panel-display | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.97 | Scalarship-cartridge-installed-in-printer | read-write | current | Set developer motor cams in the position needed for shipping the cartridges installed in the printer if set to eTrue. Additional information: Notifies the engi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.120 | Scalardevice-mac-address | read-only | current | The device's MAC address. Additional information: The device's MAC address. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.121 | Scalarextended-print-modes-modified | read-only | current | This object allows the user to view whether the extended print modes have been modified from their default settings. Additional information: This object allows… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3 | Nodeid | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.1 | Scalarmodel-number | read-only | current | Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as specific as possible. Products sho… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.2 | Scalarmodel-name | read-only | current | Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming convent… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.3 | Scalarserial-number | read-only | current | Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.5 | Scalarfw-rom-datecode | read-only | current | Identifies the base system firmware date code. The date code will be encoded in the yyyymmdd format. There may be several versions of the base system firmware.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.6 | Scalarfw-rom-revision | read-only | current | This identifies the system code firmware ROM revision code. The format for a revision is major_revision.minor_revision. There may be other ROM revision code ob… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.8 | Scalarfax-local-phone-num | read-write | current | CCITT sender's station id (ex. 08-396-4122). |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.9 | Scalarfax-station-name | read-write | current | name for the fax device (ex. HP R&D). |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.10 | Scalardevice-name | read-write | current | User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.11 | Scalardevice-location | read-write | current | User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as muc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.12 | Scalarasset-number | read-write | current | User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.13 | Scalarsystem-contact | read-write | current | User defined string containing the name of the person or group that is responsible for the device. The POS should indicate the maximum supported string length.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.18 | Scalarfax-line-interface-unit-id | read-only | current | The fax device line interface unit (LIU) identifier. The LIU number identifies the telephone system electrical characteristics supported by this device. Additi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1 | Nodesimm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1 | Nodesimm1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.4 | Scalarsimm1-type | read-only | current | Returns an indication of the type of option installed in SIMM slot 1. eEmpty means the device did not detect any option installed in the interface slot. eUnkno… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.5 | Scalarsimm1-capacity | read-only | current | Returns an indication of the capacity of the SIMM installed in SIMM slot 1. The capacity is dependent on the type of option, as indicated by the SIMM1-TYPE obj… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6 | Nodesimm1-bank | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.1 | Nodesimm1-bank1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.1.1 | Scalarsimm1-bank1-type | read-only | current | Returns an indication of the type of option installed in Bank 1 of SIMM slot 1. See SIMM1-TYPE for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.1.2 | Scalarsimm1-bank1-capacity | read-only | current | Returns an indication of the capacity of Bank 1 of the SIMM installed in SIMM slot 1. See SIMM1-CAPACITY for a description. Additional information: Returns an … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.2 | Nodesimm1-bank2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.2.1 | Scalarsimm1-bank2-type | read-only | current | Returns an indication of the type of option installed in Bank 2 of SIMM slot 1. See SIMM1-TYPE for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.1.6.2.2 | Scalarsimm1-bank2-capacity | read-only | current | Returns an indication of the capacity of Bank 2 of the SIMM installed in SIMM slot 1. See SIMM1-CAPACITY for a description. Additional information: Returns an … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2 | Nodesimm2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.4 | Scalarsimm2-type | read-only | current | Returns an indication of the type of option installed in SIMM slot 2. See SIMM1-TYPE for a description. Additional information: This object is used for describ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.5 | Scalarsimm2-capacity | read-only | current | Returns an indication of the capacity of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6 | Nodesimm2-bank | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.1 | Nodesimm2-bank1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.1.1 | Scalarsimm2-bank1-type | read-only | current | Returns an indication of the type of option installed in Bank 1 of SIMM slot 2. See SIMM1-TYPE for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.1.2 | Scalarsimm2-bank1-capacity | read-only | current | Returns an indication of the capacity of Bank 1 of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: Returns an … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.2 | Nodesimm2-bank2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.2.1 | Scalarsimm2-bank2-type | read-only | current | Returns an indication of the type of option installed in Bank 2 of SIMM slot 2. See SIMM1-TYPE for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.2.6.2.2 | Scalarsimm2-bank2-capacity | read-only | current | Returns an indication of the capacity of Bank 2 of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: Returns an … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3 | Nodesimm3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.4 | Scalarsimm3-type | read-only | current | Returns an indication of the type of option installed in SIMM slot 3. See SIMM1-TYPE for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.5 | Scalarsimm3-capacity | read-only | current | Returns an indication of the capacity of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.6 | Nodesimm3-bank | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.6.1 | Nodesimm3-bank1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.6.1.1 | Scalarsimm3-bank1-type | read-only | current | Returns an indication of the type of option installed in Bank 1 of SIMM slot 3. See SIMM1-TYPE for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.6.1.2 | Scalarsimm3-bank1-capacity | read-only | current | Returns an indication of the capacity of Bank 1 of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: Returns an … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.6.2 | Nodesimm3-bank2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.6.2.1 | Scalarsimm3-bank2-type | read-only | current | Returns an indication of the type of option installed in Bank 2 of SIMM slot 3. See SIMM1-TYPE for a description. Additional information: This object is used f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.3.6.2.2 | Scalarsimm3-bank2-capacity | read-only | current | Returns an indication of the capacity of Bank 2 of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: Returns an … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.4 | Nodesimm4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.4.4 | Scalarsimm4-type | read-only | current | Returns an indication of the type of option installed in SIMM slot 4. See SIMM1-TYPE for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.4.5 | Scalarsimm4-capacity | read-only | current | Returns an indication of the capacity of the SIMM installed in SIMM slot 4. See SIMM1-CAPACITY for a description. Additional information: Returns an indication… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.5 | Nodesimm5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.5.4 | Scalarsimm5-type | read-only | current | Returns an indication of the type of option installed in SIMM slot 5. See SIMM1-TYPE for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.5.5 | Scalarsimm5-capacity | read-only | current | Returns an indication of the capacity of the SIMM installed in SIMM slot 5. See SIMM1-CAPACITY for a description. Additional information: Returns an indication… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.6 | Nodesimm6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.6.4 | Scalarsimm6-type | read-only | current | Returns an indication of the type of option installed in SIMM slot 6. See SIMM1-TYPE for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.6.5 | Scalarsimm6-capacity | read-only | current | Returns an indication of the capacity of the SIMM installed in SIMM slot 6. See SIMM1-CAPACITY for a description. Additional information: Returns an indication… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.7 | Nodesimm7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.7.4 | Scalarsimm7-type | read-only | current | Returns an indication of the type of option installed in SIMM slot 7. See SIMM1-TYPE for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.7.5 | Scalarsimm7-capacity | read-only | current | Returns an indication of the capacity of the SIMM installed in SIMM slot 7. See SIMM1-CAPACITY for a description. Additional information: Returns an indication… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.8 | Nodesimm8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.8.4 | Scalarsimm8-type | read-only | current | Returns an indication of the type of option installed in SIMM slot 8. See SIMM1-TYPE for a description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.1.8.5 | Scalarsimm8-capacity | read-only | current | Returns an indication of the capacity of the SIMM installed in SIMM slot 8. See SIMM1-CAPACITY for a description. Additional information: Returns an indication… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2 | Nodeat | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1 | Nodeat1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1.1 | Scalarat1-model-number | read-only | current | Identifies the AT model number. If the disk was manufactured by HP, then the model number is the one listed in the HP corporate price list. If possible, encode… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1.2 | Scalarat1-model-name | read-only | current | Returns product information identifying the AT storage device. Example: C3014A Additional information: The product information is obtained from the disk using … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1.3 | Scalarat1-manufacturing-info | read-only | current | Returns information describing the manufacture of this particular AT. May include serial number and firmware revision. Additional information: Returns the mode… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1.4 | Scalarat1-type | read-only | current | Returns an indication of the type of option installed in this particular AT interface. See SIMM1-TYPE for an explanation of the enumerations. Additional inform… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.2.1.5 | Scalarat1-capacity | read-only | current | Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional inf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3 | Nodemio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1 | Nodemio1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.2 | Scalarmio1-model-name | read-only | current | Returns product information identifying the I/O card. Example: XXXX |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.3 | Scalarmio1-manufacturing-info | read-only | current | Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 1. May include serial number and firmware revision. Additional informa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.1.4 | Scalarmio1-type | read-only | current | Returns an indication of the type of option installed in MIO/EIO slot 1. See SIMM1-TYPE for an explanation of the enumerations. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.2 | Nodemio2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.2.2 | Scalarmio2-model-name | read-only | current | Returns product information identifying the I/O card. Example: XXXX |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.2.3 | Scalarmio2-manufacturing-info | read-only | current | Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 2. May include serial number and firmware revision. Additional informa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.2.4 | Scalarmio2-type | read-only | current | Returns an indication of the type of option installed in MIO/EIO slot 2. See SIMM1-TYPE for an explanation of the enumerations. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.3 | Nodemio3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.3.2 | Scalarmio3-model-name | read-only | current | Returns product information identifying the I/O card. Example: XXXX |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.3.3 | Scalarmio3-manufacturing-info | read-only | current | Returns information describing the manufacture of the I/O card installed in MIO/EIO interface 3. May include serial number and firmware revision. Additional in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.3.4 | Scalarmio3-type | read-only | current | Returns an indication of the type of option installed in MIO/EIO interface 3. See SIMM1-TYPE for an explanation of the enumerations. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4 | Nodemio4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.2 | Scalarmio4-model-name | read-only | current | Returns product information identifying the I/O card. Example: XXXX |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.3 | Scalarmio4-manufacturing-info | read-only | current | Returns information describing the manufacture of the I/O card installed in MIO/EIO interface 4. May include serial number and firmware revision |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.3.4.4 | Scalarmio4-type | read-only | current | Returns an indication of the type of option installed in MIO/EIO interface 4. See SIMM1-TYPE for an explanation of the enumerations |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5 | Nodephd | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1 | Nodephd1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1.1 | Scalarphd1-model | read-only | current | Returns product information identifying the PHD device. Example: XXXX |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1.2 | Scalarphd1-manufacturing-info | read-only | current | Returns information describing the manufacture of this particular PHD. May include serial number and firmware revision. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1.3 | Scalarphd1-type | read-only | current | Returns an indication of the type of option installed as PHD 1. See SIMM1-TYPE for an explanation of the enumerations. Additional information: Returns an indic… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.1.4 | Scalarphd1-capacity | read-only | current | Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional inf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2 | Nodephd2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.1 | Scalarphd2-model | read-only | current | Returns product information identifying PHD device 2. Additional information: If at least one (1) external paper handling device is attached to the printer, th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.2 | Scalarphd2-manufacturing-info | read-only | current | Returns information describing the manufacture of PHD 2. May include serial number and firmware revision. Additional information: If at least one (1) external … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.3 | Scalarphd2-type | read-only | current | Returns an indication of the type of option installed in PHD interface 2. See SIMM1-TYPE for an explanation of the enumerations. Additional information: If at … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.2.4 | Scalarphd2-capacity | read-only | current | Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional inf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3 | Nodephd3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.1 | Scalarphd3-model | read-only | current | Returns product information identifying PHD device 3. Additional information: If at least two (2) external paper handling devices are attached to the printer, … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.2 | Scalarphd3-manufacturing-info | read-only | current | Returns information describing the manufacture of PHD 3. May include serial number and firmware revision. Additional information: If at least two (2) external … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.3 | Scalarphd3-type | read-only | current | Returns an indication of the type of option installed in PHD interface 3. See SIMM1-TYPE for an explanation of the enumerations. Additional information: If at … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.3.4 | Scalarphd3-capacity | read-only | current | Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional inf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.4 | Nodephd4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.4.1 | Scalarphd4-model | read-only | current | Returns product information identifying PHD device 4. Additional information: If at least three (3) external paper handling devices are attached to the printer… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.4.2 | Scalarphd4-manufacturing-info | read-only | current | Returns information describing the manufacture of PHD 4. May include serial number and firmware revision. Additional information: If at least three (3) externa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.4.3 | Scalarphd4-type | read-only | current | Returns an indication of the type of option installed in PHD interface 4. See SIMM1-TYPE for an explanation of the enumerations. Additional information: If at … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.4.4 | Scalarphd4-capacity | read-only | current | Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional inf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.5 | Nodephd5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.5.1 | Scalarphd5-model | read-only | current | Returns product information identifying PHD device 3. Additional information: If at least four (4) external paper handling devices are attached to the printer,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.5.2 | Scalarphd5-manufacturing-info | read-only | current | Returns information describing the manufacture of PHD 5. May include serial number and firmware revision. Additional information: If at least four (4) external… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.5.3 | Scalarphd5-type | read-only | current | Returns an indication of the type of option installed in PHD interface 5. See SIMM1-TYPE for an explanation of the enumerations. Additional information: If at … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.5.4 | Scalarphd5-capacity | read-only | current | Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional inf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.6 | Nodephd6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.6.1 | Scalarphd6-model | read-only | current | Returns product information identifying PHD device 6. Additional information: If at least five (5) external paper handling devices are attached to the printer,… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.6.2 | Scalarphd6-manufacturing-info | read-only | current | Returns information describing the manufacture of PHD 6. May include serial number and firmware revision. Additional information: If at least five (5) external… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.6.3 | Scalarphd6-type | read-only | current | Returns an indication of the type of option installed in PHD interface 6. See SIMM1-TYPE for an explanation of the enumerations. Additional information: If at … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.5.6.4 | Scalarphd6-capacity | read-only | current | Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional inf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6 | Nodeweb-server | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6.1 | Nodesettings-web-server | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6.1.4 | Scalarweb-proxy-config-enable | read-only | current | This object is a OCTET STRING enumeration which the peripheral uses to inform the JetDirect card that the Jet-Direct card embedded web server should display th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.6.1.5 | Scalarews-request-control-panel-supplies-status | read-write | current | System variable EWS_REQUEST_CONTROL_PANEL_SUPPPLIES_STATUS requires a PML interface so that WJA can directly access it without needing EWS support for that |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.8 | Nodeforeign-interface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.8.2 | Scalarfih-extra-pulses-feature | read-write | current | This object allows one to get/set the setting of the FIH EXTRA PULSES FEATURE item. This either turns the feature on or off based on customer requirement |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9 | Nodeusb-interface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2 | Nodeusb | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.4.9.2.5 | Scalarusb-product-id | read-only | current | Returns the Product ID of a connected USB device as defined in the Standard Device Descriptor of the Universal Serial Bus Specification Version 2.0. The value … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5 | Nodetest | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.1 | Scalarself-test | read-write | current | Writing this object allows a device self test to be started. Reading this object provides an indication what self-test is currently executing, if any. Actual s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.2 | Scalarprint-internal-page | read-write | current | Writing this object to a value other than eNotPrintingAnInternalPage causes the device to attempt to print an internally generated page. Reading this object pr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6 | Nodejob | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1 | Nodesettings-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.1 | Scalarclearable-warning | read-write | current | Returns or controls how the device will track clearable warnings. A clearable warning indicates a transient event in the device. The device will continue after… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.2 | Scalarcancel-job | read-write | current | Cancels the print job whose ID matches the value written to the CANCEL-JOB object. The host first learns the job ID using the CURRENT-JOB-PARSING-ID command. I… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.3 | Scalarjob-info-change-id | read-only | current | Returns the current value of an object in the job-info sub-tree whose value has changed. Define the object identifier for the object whose value has changed as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.10 | Scalarhold-job-timeout | read-write | current | The time, in minutes, that the printer will wait before automatically deleting a held job. This allows the printer to automatically clean up jobs that have bee… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2 | Nodeactive-print-jobs | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1 | Nodejob-being-parsed | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1.1 | Scalarcurrent-job-parsing-id | read-only | current | Contains the printer assigned job identification for the job currently being processed by the processing PDL sub- system. The job ID is a monotonically increas… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3 | Nodefax-job-control | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.1 | Nodesettings-fax-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.1.1 | Scalarfaxjob-action | read-write | current | Permits host to specify an action to be applied with a particular fax. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.1.2 | Scalarfaxjob-action-id | read-write | current | Contains the fax job identification of the fax to be acted upon by the action specified by the object FAXJOB- ACTION. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.1.3 | Scalarfaxjob-tx-type | read-write | current | Indicates sources of the fax image for transmission. Also specifies the temporal order of the data sources. eSrcHostOnly - The fax document images will be whol… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.1.5 | Scalarfaxjob-print-duplex-mode-select | read-write | current | Allows the host to enable or disable duplex printing on a device for the next fax job. Additional information: Allows the host to enable or disable duplex prin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.2 | Nodestatus-fax-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.2.1 | Scalarfaxjob-download-id | read-only | current | Contains the device assigned job identification for the current fax downloading job. The job ID is monotonically increasing number. The job ID may be reset to … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.2.2 | Scalarfaxjob-rx-id | read-only | current | Contains the device assigned job identification for the currently fax reception job. The job ID is monotonically increasing number. The job ID may be reset to … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.2.3 | Scalarfaxjob-tx-id | read-only | current | Contains the device assigned job identification for the current fax transmission job. The job ID is monotonically increasing number. The job ID may be reset to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.2.4 | Scalarfaxjob-upload-id | read-only | current | Contains the device assigned job identification for the current fax upload job. The job ID is monotonically increasing number. The job ID may be reset to zero … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3 | Nodefaxjob | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.1 | Nodefaxjob-rx-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.1.1 | Scalarfaxjob-rx-status-1 | read-only | current | Status of receiving fax session 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.3 | Nodefaxjob-tx-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.3.1 | Scalarfaxjob-tx-status-1 | read-only | current | Status of sending fax session 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.4 | Nodefaxjob-tx-error | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.4.1 | Scalarfaxjob-tx-error-1 | read-only | current | Error status of the fax reception session 1. Additional information: Error status of the fax transmission session 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.5 | Nodefaxjob-tx-current-page | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.5.1 | Scalarfaxjob-tx-current-page-1 | read-only | current | The page number of the fax page currently being transmitted via send fax session 1. Starts with page number 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.6 | Nodefaxjob-rx-current-page | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.6.1 | Scalarfaxjob-rx-current-page-1 | read-only | current | The page number of the fax page currently being received via fax reception session 1. Starts with page number 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.7 | Nodefaxjob-rx-duration | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.7.1 | Scalarfaxjob-rx-duration-1 | read-only | current | Represent the number of seconds of phone-connect time for a fax reception session 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.8 | Nodefaxjob-tx-duration | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.3.3.8.1 | Scalarfaxjob-tx-duration-1 | read-only | current | Represent the number of seconds of phone-connect time for send fax session 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.4 | Nodefax-activity-log | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.4.1 | Nodesettings-faxlog | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.4.1.1 | Scalarfax-log-action | read-write | current | Provides applications with the ability to clear or print the fax transaction log. eIdle - no action is occurring on the fax log. eClear - clear the fax log. eP… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.4.1.2 | Scalarfax-log-reporting | read-write | current | Specifies when fax transaction logs are to be printed. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5 | Nodejob-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.1 | Scalarjob-info-name1 | read-only | current | Contains the first part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: The job name is the s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.2 | Scalarjob-info-name2 | read-only | current | Contains the second part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: See job-info-name1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.10 | Scalarjob-info-stage | read-only | current | Indicates what printer sub-systems are currently processing this print job. The last OID field for this dynamic object contains the job ID. cSourceSubsystem - … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.11 | Scalarjob-info-io-source | read-only | current | Indicates which I/O source, the print job was received over. The value maps to port numbering scheme supported in the DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.12 | Scalarjob-info-pages-processed | read-only | current | Indicates the number of pages processed by the processing subsystem. If neither the cSourceSubsystem or the cProcessingSubsystem items are in the associated JO… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.13 | Scalarjob-info-pages-printed | read-only | current | Indicates the number of pages printed by the destination subsystem. If non of the cSourceSubsystem, cProcessingSubsystem or cDestinationSubsystem items are in … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.14 | Scalarjob-info-size | read-only | current | Indicates the number of bytes of data processed by the processing subsystem. If neither of the cSourceSubsystem or cProcessingSubsystem items are in the associ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.15 | Scalarjob-info-state | read-only | current | Indicates the state of the job. The last OID field for this dynamic object contains the job ID. eAborted - the print job was aborted. eWaitingForResources - th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.19 | Scalarjob-info-outcome | read-only | current | Indicates if any warning or error conditions were encountered while processing the assoicated job. The last OID field for this dynamic object contains the job … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.20 | Scalarjob-info-outbins-used | read-only | current | Indicates which output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID. Additional information: Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.22 | Scalarjob-info-physical-outbins-used | read-only | current | Indicates which physical output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID. Additional inform… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23 | Nodejob-info-attribute | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.1 | Scalarjob-info-attr-1 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. Attribute objects are saved sequentially, starting with 1, after the start of a job. If mor… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.2 | Scalarjob-info-attr-2 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.3 | Scalarjob-info-attr-3 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.4 | Scalarjob-info-attr-4 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.5 | Scalarjob-info-attr-5 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.6 | Scalarjob-info-attr-6 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.7 | Scalarjob-info-attr-7 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.8 | Scalarjob-info-attr-8 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.9 | Scalarjob-info-attr-9 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.10 | Scalarjob-info-attr-10 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.11 | Scalarjob-info-attr-11 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.12 | Scalarjob-info-attr-12 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.13 | Scalarjob-info-attr-13 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.14 | Scalarjob-info-attr-14 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.15 | Scalarjob-info-attr-15 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.16 | Scalarjob-info-attr-16 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.17 | Scalarjob-info-attr-17 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.18 | Scalarjob-info-attr-18 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.19 | Scalarjob-info-attr-19 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.20 | Scalarjob-info-attr-20 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.21 | Scalarjob-info-attr-21 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.22 | Scalarjob-info-attr-22 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.23 | Scalarjob-info-attr-23 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.24 | Scalarjob-info-attr-24 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.25 | Scalarjob-info-attr-25 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.26 | Scalarjob-info-attr-26 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.27 | Scalarjob-info-attr-27 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.28 | Scalarjob-info-attr-28 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.29 | Scalarjob-info-attr-29 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.30 | Scalarjob-info-attr-30 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.31 | Scalarjob-info-attr-31 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.23.32 | Scalarjob-info-attr-32 | read-only | current | Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.24 | Scalarjob-info-requested-originals | read-only | current | The number of requested collated copies. The value was supplied with the job via PJL QTY variable, the PostScript Collate and NumCopies entries in the page dev… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.25 | Scalarjob-info-page-count-current-original | read-only | current | The page number being printed within the current copy of a collated multi-copy job. This value changes when the job-info-pages-printed changes. The job-info-pa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.26 | Scalarjob-info-pages-in-original | read-only | current | Number of pages in a single copy of a collated multi- copy job. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.27 | Scalarjob-info-printed-originals | read-only | current | Number of collated copies completely printed and delivered to the output bin at time of query. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.5.28 | Nodejob-info-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7 | Nodeheld-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1 | Nodeheld-job-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.1 | Scalarheld-job-user-name | read-only | current | User name that is obtained by the driver through some internal method or from user input. Additional information: The following is a general description for al… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.2 | Scalarheld-job-job-name | read-only | current | The job name may be generated by the driver or obtained from user input. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.3 | Scalarheld-job-retention | read-only | current | Indicates the retention classification of the job. The values indicate whether the job is printed immediately and/or stored. There are 4 options: OFF: The job … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.4 | Scalarheld-job-security | read-only | current | The variable specifies the security level of the job. PUBLIC: The job does not require a PIN in order to release the job for printing. PRIVATE: The job require… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.5 | Scalarheld-job-quantity | read-only | current | Number of copies to print. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.1.6 | Scalarheld-job-pin | read-only | current | A string that is specified in the job stream and then required to be entered in order to release the job for printing. PIN stands for Personal Identification N… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2 | Nodeheld-job-control | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.1 | Scalarheld-job-print | read-write | current | Instructs the printer to schedule the specified held job for printing with the specified number of copies. The job-id is used to identify which job to print. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.2 | Scalarheld-job-delete | read-write | current | Instructs the printer to delete the specified held job from the list. The job-id is used to identify which job to delete. A held job can also be deleted from t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.3 | Scalarheld-job-set-queue-size | read-write | current | Sets the maximum number of jobs which can be stored in the held job list. Additional information: Sets the size of the temporary job lists queue. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.7.2.4 | Scalarheld-job-enable | read-write | current | Enables or disables Job Retention (Job Hold). The valid values are eDisabled and eEnabled. (Specifying an invalid mode causes an <badValue> error to be returne… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8 | Nodephoto-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.2 | Scalarphoto-access-card-error | read-only | current | Specifies the error reason for most recent unsucessful photo card access. Additional information: Specifies the error reason for most recent unsucessful photo … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3 | Nodesettings-photo-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.1 | Scalarphoto-default-num-copies | read-write | current | Reads or writes the default number of copies to be printed during photo application print jobs. This value is saved over a power cycle. Additional information:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.2 | Scalarphoto-job-num-copies | read-write | current | Reads or writes the number of copies to be printed during the next photo application print job. This value is not saved over power cycles. Additional informati… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.4 | Scalarphoto-job-media-size | read-write | current | Reads or writes the default media size to be used during the next photo application print job. This value is not saved over power cycles. Additional informatio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.6 | Scalarphoto-job-media-name | read-write | current | Reads or writes the media type to be used on the next photo application print job. This value is not saved over power cycles. Additional information: Reads or … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.7 | Scalarphoto-image-size | read-write | current | Reads or writes the default image size to be used during photo application print jobs. This value is saved over power cycles. Additional information: Reads or … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.8 | Scalarphoto-job-image-size | read-write | current | Reads or writes the image size to be used during the next photo application print job. This value is not saved over power cycles. Additional information: Reads… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.9 | Scalarphoto-select-images | read-write | current | Reads or writes the list of images to print during the next photo application print job. Each image number or number range must be separated by a comma. The im… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.10 | Scalarphoto-images-on-card | read-only | current | Reads the number of printable photo images found on the inserted memory card. If 0, then no images were found, or the card was not properly inserted. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.11 | Scalarphoto-job-source | read-write | current | Controls initiating photo application features. Additional information: Controls initiating photo application features. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.12 | Scalarphoto-color-page-count | read-write | current | Reads or writes the page count for color pages printed by the photo application. This value is saved over power cycles. Additional information: Reads or writes… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.13 | Scalarphoto-mono-page-count | read-write | current | Reads or writes the page count for monochrome pages printed by the photo application. This value is saved over power cycles. Additional information: Reads or w… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.15 | Scalarphoto-image-size-set | read-write | current | This is only writable in service mode. This object changes the set of valid image sizes for the device. The image sizes groups are as follows: eImageSizeSetInc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.18 | Scalarphoto-clear-counts | read-write | current | writing this object causes the page counts, insert counts, or all photo counts to be cleared and reset to 0. Additional information: writing this object causes… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.19 | Scalarphoto-compact-flash-insert-count | read-write | current | Reads or writes the count for the number of times a compact flash memory card has been inserted in the device. This value is saved over a power cycle. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.20 | Scalarphoto-memory-stick-insert-count | read-write | current | Reads or writes the count for the number of times a memory stick memory card has been inserted in the device. This value is saved over a power cycle. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.21 | Scalarphoto-memory-stick-pro-insert-count | read-write | current | Reads or writes the count for the number of times a memory stick pro memory card has been inserted in the device. This value is saved over a power cycle. Addit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.22 | Scalarphoto-smart-media-insert-count | read-write | current | Reads or writes the count for the number of times a smart media memory card has been inserted in the device. This value is saved over a power cycle. Additional… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.23 | Scalarphoto-secure-digital-insert-count | read-write | current | Reads or writes the count for the number of times a secure digital memory card has been inserted in the device. This value is saved over a power cycle. Additio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.24 | Scalarphoto-mmc-insert-count | read-write | current | Reads or writes the count for the number of times a MultiMediaCard memory card has been inserted in the device. This value is saved over a power cycle. Additio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.8.3.25 | Scalarphoto-xd-insert-count | read-write | current | Reads or writes the count for the number of times an xD-Picture memory card has been inserted in the device. This value is saved over a power cycle. Additional… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9 | Nodephone | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1 | Nodedial | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1 | Nodedial-all-lines | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.1 | Scalarfax-dial-mode | read-write | current | Device should use DTMF dialing if eToneDial, pulse dial if ePulseDial. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.1.1.2 | Scalardevice-redial | read-write | current | Device to permit redial upon detecting certain error conditions. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.2 | Nodeanswer | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.2.1 | Nodeanswer-all-lines | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.2.1.1 | Scalarfax-answer-mode | read-write | current | Sets the answering-priority when using a shared voice line. eManualAnswer - Device will not automatically answer the phone. User must answer and push START but… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.2.1.2 | Scalarfax-num-rings-pickup | read-write | current | Number of rings before the fax device answers the phone if FAX-ANSWER-MODE is not set to MANUAL-MODE. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.9.2.1.3 | Scalardevice-ring-type-pickup | read-write | current | Device to answer the incoming call based on detecting the the specified type of telephone ring. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10 | Nodefile-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1 | Nodesettings-file-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.1 | Scalarfile-system-memory | read-only | current | The amount of memory, in bytes, used by the file system to buffer file data. Additional information: Reports the amount of memory, in bytes, reserved for use b… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.2 | Scalarfile-system-max-open-files | read-write | current | The number of open files allowed at one time. Opening a file when the maximum number of files are currently open will fail. Additional information: Indicates t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.3 | Scalarfile-system-test-return-code | read-write | current | This test object that will not be supported in any released product. Setting this object allows the next file system call return code to be specified or to sim… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.6 | Scalarfile-system-set-system-partition-writeable | read-write | current | This object allows the system partition to be written to. It consists of a C structure containing the following fields: typedef struct { ubyte password[8]; uby… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.7 | Scalarfile-system-set-system-partition-readonly | read-write | current | Changes a system partition to be READ-ONLY. The value is the volume number to change. If the volume number specified is NOT a system partition an error is retu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.8 | Scalarfile-system-delete-files | read-write | current | Setting this object causes the specified filename to be deleted, after first validating that the authentication data is correct for the specified user ID. The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.9 | Scalarfile-system-security-access-password | read-write | current | This object acts as a gate keeper for write access to the PML objects FILE-SYSTEM-EXTERNAL-ACCESS-CAPABILITIES, FILE-SYSTEM-ERASE-MODE, and FILE-SYSTEM-WIPE-DI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.10 | Scalarfile-system-external-access-capabilities | read-write | current | This object is used to control access to the file system of the device. It is always readable. It is writable when FILE-SYSTEM-SECURITY-ACCESS-PASSWORD is not … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.11 | Scalarfile-system-erase-mode | read-write | current | This object is used to control how file data is handled when files are deleted. It is always readable. It is writable when FILE-SYSTEM-SECURITY-ACCESS-PASSWORD… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.12 | Scalarfile-system-wipe-disk | read-write | current | This object is a non-leaf node which will have one leaf node under it for each file system in the printer. The leaf nodes will be in a 1-to-1 correspondence wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.1.13 | Scalarfile-system-wipe-disk-status | read-only | current | This object is a non-leaf node which will have one leaf node under it for each file system in the printer. The leaf nodes will be in a 1-to-1 correspondence wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2 | Nodestatus-file-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.1 | Scalarfile-system-statistic-read-open | read-only | current | The number of times the file system has received requests to open a file for reading. Opening a file for both reading and writing will cause this value to chan… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.2 | Scalarfile-system-statistic-write-open | read-only | current | The number of times the file system has received requests to open a file for writing. Opening a file for both reading and writing will cause this value to chan… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.3 | Scalarfile-system-statistic-successful | read-only | current | A counter indicating the number of file system requests that completed successfully. The POS should state if a power cycle causes the counter is be reset to ze… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.4 | Scalarfile-system-statistic-unsuccessful | read-only | current | A counter indicating the number of file system requests that completed unsuccessfully. The POS should state if a power cycle causes the counter is be reset to … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.5 | Scalarfile-system-statistic-current-memory-usage | read-only | current | A value indicating the number of bytes of RAM currently used by the file system firmware. Additional information: Reset to the factory default value after a po… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.2.6 | Scalarfile-system-statistic-max-memory-usage | read-only | current | A value indicating the maximum number of bytes of RAM used by the file system firmware. The POS should state if the value is reset to zero after a power cycle.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3 | Nodefile-systems | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.1 | Nodefile-system1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.1.1 | Scalarfile-system1-initialized | read-only | current | Returns eTrue if a file system has been written to the mass storage device(s) which will hold file data contained in this file system. Returns eFalse otherwise… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.1.2 | Scalarfile-system1-capacity | read-only | current | Returns the total size, in bytes, of the mass storage space configured to hold the file data (and file system information) assoicated with files stored in this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.1.3 | Scalarfile-system1-free-space | read-only | current | Returns the total amount, in bytes, of unused storage space currently available to this file system. Additional information: This objects is only supported if … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.1.4 | Scalarfile-system1-write-protect | read-write | current | Supports write-protecting the file system. Setting FILE-SYSTEM-WRITE-PROTECT to eEnabled blocks any modification of the contents of the file system. Setting FI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.2 | Nodefile-system2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.2.6 | Scalarfile-system2-initialize-volume | read-write | current | Setting this object to eInitializing causes file system 2 to be initialized. Reading this object indicates if the file system is currently being initialized. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.3 | Nodefile-system3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.3.6 | Scalarfile-system3-initialize-volume | read-write | current | Setting this object to eInitializing causes file system 3 to be initialized. Reading this object indicates if the file system is currently being initialized. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.4 | Nodefile-system4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.10.3.4.6 | Scalarfile-system4-initialize-volume | read-write | current | Setting this object to eInitializing causes file system 4 to be initialized. Reading this object indicates if the file system is currently being initialized. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11 | Nodeerrorlog | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1 | Nodeerror1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.1 | Scalarerror1-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.2 | Scalarerror1-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2 | Nodeerror2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.1 | Scalarerror2-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.2 | Scalarerror2-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3 | Nodeerror3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.1 | Scalarerror3-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.2 | Scalarerror3-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4 | Nodeerror4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.1 | Scalarerror4-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.2 | Scalarerror4-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5 | Nodeerror5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.1 | Scalarerror5-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.2 | Scalarerror5-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6 | Nodeerror6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.1 | Scalarerror6-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 6 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.2 | Scalarerror6-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7 | Nodeerror7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.1 | Scalarerror7-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 7 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.2 | Scalarerror7-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8 | Nodeerror8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.1 | Scalarerror8-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 8 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.2 | Scalarerror8-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9 | Nodeerror9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.1 | Scalarerror9-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 9 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.2 | Scalarerror9-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10 | Nodeerror10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.1 | Scalarerror10-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 10 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.2 | Scalarerror10-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11 | Nodeerror11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.1 | Scalarerror11-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 11 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.2 | Scalarerror11-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12 | Nodeerror12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.1 | Scalarerror12-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 12 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.2 | Scalarerror12-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13 | Nodeerror13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.1 | Scalarerror13-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 13 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.2 | Scalarerror13-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14 | Nodeerror14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.1 | Scalarerror14-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 14 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.2 | Scalarerror14-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15 | Nodeerror15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.1 | Scalarerror15-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 15 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.2 | Scalarerror15-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16 | Nodeerror16 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.1 | Scalarerror16-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 16 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.16.2 | Scalarerror16-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17 | Nodeerror17 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.1 | Scalarerror17-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 17 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.17.2 | Scalarerror17-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18 | Nodeerror18 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.1 | Scalarerror18-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 18 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.18.2 | Scalarerror18-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19 | Nodeerror19 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.1 | Scalarerror19-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 19 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.19.2 | Scalarerror19-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20 | Nodeerror20 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.1 | Scalarerror20-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 20 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.20.2 | Scalarerror20-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21 | Nodeerror21 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.1 | Scalarerror21-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 21 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.21.2 | Scalarerror21-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22 | Nodeerror22 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.1 | Scalarerror22-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 22 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.22.2 | Scalarerror22-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23 | Nodeerror23 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.1 | Scalarerror23-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 23 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.23.2 | Scalarerror23-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24 | Nodeerror24 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.1 | Scalarerror24-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 24 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.24.2 | Scalarerror24-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25 | Nodeerror25 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.1 | Scalarerror25-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 25 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.25.2 | Scalarerror25-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26 | Nodeerror26 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.1 | Scalarerror26-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 26 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.26.2 | Scalarerror26-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27 | Nodeerror27 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.1 | Scalarerror27-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 27 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.27.2 | Scalarerror27-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28 | Nodeerror28 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.1 | Scalarerror28-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 28 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.28.2 | Scalarerror28-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29 | Nodeerror29 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.1 | Scalarerror29-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 29 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.29.2 | Scalarerror29-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30 | Nodeerror30 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.1 | Scalarerror30-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 30 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.30.2 | Scalarerror30-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31 | Nodeerror31 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.1 | Scalarerror31-time-stamp | read-only | current | Contains some sort of time stamp indicating when error 31 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.31.2 | Scalarerror31-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32 | Nodeerror32 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.1 | Scalarerror32-time-stamp | read-only | current | Contains a time stamp indicating when error 32 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.32.2 | Scalarerror32-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33 | Nodeerror33 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.1 | Scalarerror33-time-stamp | read-only | current | Contains a time stamp indicating when error 33 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.33.2 | Scalarerror33-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34 | Nodeerror34 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.1 | Scalarerror34-time-stamp | read-only | current | Contains a time stamp indicating when error 34 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.34.2 | Scalarerror34-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35 | Nodeerror35 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.1 | Scalarerror35-time-stamp | read-only | current | Contains a time stamp indicating when error 35 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.35.2 | Scalarerror35-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36 | Nodeerror36 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.1 | Scalarerror36-time-stamp | read-only | current | Contains a time stamp indicating when error 36 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.36.2 | Scalarerror36-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37 | Nodeerror37 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.1 | Scalarerror37-time-stamp | read-only | current | Contains a time stamp indicating when error 37 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.37.2 | Scalarerror37-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38 | Nodeerror38 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.1 | Scalarerror38-time-stamp | read-only | current | Contains a time stamp indicating when error 38 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.38.2 | Scalarerror38-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39 | Nodeerror39 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.1 | Scalarerror39-time-stamp | read-only | current | Contains a time stamp indicating when error 39 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.39.2 | Scalarerror39-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40 | Nodeerror40 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.1 | Scalarerror40-time-stamp | read-only | current | Contains a time stamp indicating when error 40 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.40.2 | Scalarerror40-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41 | Nodeerror41 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.1 | Scalarerror41-time-stamp | read-only | current | Contains a time stamp indicating when error 41 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.41.2 | Scalarerror41-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42 | Nodeerror42 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.1 | Scalarerror42-time-stamp | read-only | current | Contains a time stamp indicating when error 42 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.42.2 | Scalarerror42-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43 | Nodeerror43 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.1 | Scalarerror43-time-stamp | read-only | current | Contains a time stamp indicating when error 43 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.43.2 | Scalarerror43-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44 | Nodeerror44 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.1 | Scalarerror44-time-stamp | read-only | current | Contains a time stamp indicating when error 44 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.44.2 | Scalarerror44-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45 | Nodeerror45 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.1 | Scalarerror45-time-stamp | read-only | current | Contains a time stamp indicating when error 45 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.45.2 | Scalarerror45-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46 | Nodeerror46 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.1 | Scalarerror46-time-stamp | read-only | current | Contains a time stamp indicating when error 46 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.46.2 | Scalarerror46-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47 | Nodeerror47 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.1 | Scalarerror47-time-stamp | read-only | current | Contains a time stamp indicating when error 47 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.47.2 | Scalarerror47-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48 | Nodeerror48 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.1 | Scalarerror48-time-stamp | read-only | current | Contains a time stamp indicating when error 48 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.48.2 | Scalarerror48-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49 | Nodeerror49 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.1 | Scalarerror49-time-stamp | read-only | current | Contains a time stamp indicating when error 49 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.49.2 | Scalarerror49-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50 | Nodeerror50 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.1 | Scalarerror50-time-stamp | read-only | current | Contains a time stamp indicating when error 50 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.50.2 | Scalarerror50-code | read-only | current | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.51 | Nodeerror51 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.52 | Nodeerror52 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.53 | Nodeerror53 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.54 | Nodeerror54 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.55 | Nodeerror55 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.56 | Nodeerror56 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.57 | Nodeerror57 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.58 | Nodeerror58 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.59 | Nodeerror59 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.60 | Nodeerror60 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.61 | Nodeerror61 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.62 | Nodeerror62 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.63 | Nodeerror63 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.64 | Nodeerror64 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.65 | Nodeerror65 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.66 | Nodeerror66 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.67 | Nodeerror67 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.68 | Nodeerror68 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.69 | Nodeerror69 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.70 | Nodeerror70 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.71 | Nodeerror71 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.72 | Nodeerror72 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.73 | Nodeerror73 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.74 | Nodeerror74 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.75 | Nodeerror75 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.76 | Nodeerror76 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.77 | Nodeerror77 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.78 | Nodeerror78 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.79 | Nodeerror79 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.80 | Nodeerror80 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.81 | Nodeerror81 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.82 | Nodeerror82 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.83 | Nodeerror83 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.84 | Nodeerror84 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.85 | Nodeerror85 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.86 | Nodeerror86 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.87 | Nodeerror87 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.88 | Nodeerror88 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.89 | Nodeerror89 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.90 | Nodeerror90 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12 | Noderesource-manager | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3 | Nodemass-storage-resources | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3.1 | Scalarmass-storage-resource-change-counter | read-only | current | A counter which changes when a mass storage based resource has been added or deleted. Additional information: The value of this counter changes each time the M… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.12.3.2 | Scalarmass-storage-resource-changed | read-write | current | Setting to eTrue causes MASS-STORAGE-RESOURCE-CHANGE- COUNTER to be incremented. Additional information: Returns <noSuchName> status if attempting to access th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13 | Noderemote-procedure-call | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1 | Nodesettings-rpc | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1.1 | Scalarrpc-test-return-code | read-write | current | This test object that will not be supported in any released product. Setting this object allows the next RPC call return code to be specified. The POS will spe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.1.2 | Scalarrpc-bind-protocol-address | read-write | current | Array of Berkeley sockets style protocol addresses used to bind RPC to a communications protocol family. Setting an instance of this array object to a zero len… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2 | Nodestatus-rpc | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2.1 | Scalarrpc-statistic-successful | read-only | current | A counter indicating the number of RPC requests that completed successfully (reply_data stat is SUCCESS). The POS should state if a power cycle causes the coun… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2.2 | Scalarrpc-statistic-unsuccessful | read-only | current | A counter indicating the number of RPC requests that completed unsuccessfully (reply_data stat is not SUCCESS). The POS should state if a power cycle causes th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.2.3 | Scalarrpc-bound-protocol-address | read-only | current | An array of Berkeley sockets style protocol addresses that the NFS service has been bound to successful. The format is that same as the array of RPC-BIND-PROTO… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3 | Noderpc-services | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.1 | Nodemount | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.1.1 | Nodesettings-mount | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.1.1.1 | Scalarmount-test-return-code | read-write | current | This test object that will not be supported in any released product. Setting this object allows the next mount call return code to be specified. The POS will s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2 | Nodenfs-server | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.1 | Nodesettings-nfs-server | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.1.1 | Scalarnfs-server-memory | read-only | current | The amount of memory, in bytes, used by the Network File System server to buffer file data. Additional information: Reports the amount of memory, in bytes, res… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.1.2 | Scalarnfs-server-read-size | read-write | current | The maximum amount of data transferred in one NFS server read data call. Additional information: An unfortunate side effect of the implementation is initializi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.1.3 | Scalarnfs-server-write-size | read-write | current | The maximum amount of data transferred in one NFS server write data call. Additional information: An unfortunate side effect of the implementation is initializ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.1.4 | Scalarnfs-server-test-return-code | read-write | current | This test object that will not be supported in any released product. Setting this object allows the next NFS call return code to be specified. The POS will spe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.2 | Nodestatus-nfs-server | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.2.1 | Scalarnfs-server-statistic-successful | read-only | current | A counter indicating the number of NFS requests that completed without error. The POS should state if a power cycle causes the counter is be reset to zero. Add… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.2.2 | Scalarnfs-server-statistic-unsuccessful | read-only | current | A counter indicating the number of NFS requests that completed with an NFS status other than NFS_OK (0). The POS should state if a power cycle causes the count… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.2.4 | Scalarnfs-server-statistic-current-memory-usage | read-only | current | A value indicating the number of bytes of RAM currently used by the NFS firmware. Additional information: Reset to the factory default value after a power cycl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.2.2.5 | Scalarnfs-server-statistic-max-memory-usage | read-only | current | A value indicating the maximum number of bytes of RAM used by the NFS firmware. The POS should state if the value is reset to zero after a power cycle. Additio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3 | Noderpc-bind | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3.1 | Nodesettings-rpc-bind | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3.1.1 | Scalarrpc-bind-test-return-code | read-write | current | This test object that will not be supported in any released product. Setting this object allows the next RPC bind call return code to be specified. The POS wil… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3.2 | Nodestatus-rpc-bind | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3.2.1 | Scalarrpc-bind-statistic-successful | read-only | current | A counter indicating the number of RPC bind (RPC program number 100000, version 2) requests that completed successfully. The POS should state if a power cycle … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.13.3.3.2.2 | Scalarrpc-bind-statistic-unsuccessful | read-only | current | A counter indicating the number of RPC bind (RPC program number 100000, version 2) requests that completed unsuccessfully. The POS should state if a power cycl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.14 | Nodexport-interface | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.14.2 | Nodestatus-xip | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.14.2.1 | Scalarxip-statistic-processed | read-only | current | A counter indicating the number of XIP requests that were processed. The POS should state if a power cycle causes the counter is be reset to zero. Additional i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.14.2.2 | Scalarxip-statistic-data-in-dropped | read-only | current | A counter indicating the number of XIP data in datagrams that were dropped (typically due to the printer being flooded with XIP requests ). The POS should stat… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15 | Nodemass-storage-block-driver | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.1 | Nodesettings-mass-storage-bd | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.1.1 | Scalarram-disk-mode | read-write | current | Returns or controls RAM disk support. eOFF turns off the RAM disk functionality. eOn turns on the RAM disk functionality and creates a RAM disk whose size is c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.1.2 | Scalarram-disk-size | read-write | current | Returns or controls the size of the RAM disk. The device POS specifies the minimum memory requirements. The object MAXIMUM-RAM-DISK-MEMORY specifies the maximu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.2 | Nodestatus-mass-storage-bd | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.2.1 | Scalarmaximum-ram-disk-memory | read-only | current | This object's name is misleading. This object does not return the maximum configurable RAM disk size. Instead, it returns the maximum amount of memory, in byte… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.3 | Nodemass-storage-block-drivers | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.3.2 | Nodemass-storage-bd2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.3.2.1 | Nodesettings-msbd2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.15.3.2.1.1 | Scalardisk-storage-block-driver2-test-return-code | read-write | current | This test object will not be supported in any released product. Setting this object allows the next call to the mass storage block driver 2 to return the speci… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16 | Nodeaccounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1 | Nodeprinter-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1 | Nodeprinted-media-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.1 | Scalarprinted-media-simplex-count | read-only | current | Total number of simplex pages printed in this media size. Additional information: The 5 usage (simplex/duplex count, simplex/duplex click charge and paper size… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.2 | Scalarprinted-media-simplex-charge | read-write | current | Charge for each simplex page printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.3 | Scalarprinted-media-duplex-count | read-only | current | Total number of duplex pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.4 | Scalarprinted-media-duplex-charge | read-write | current | Charge for each duplex page printed in this media size. Additional information: The click charges for duplex printed media. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.5 | Scalarprinted-media-total-charge | read-only | current | The total charge for pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.7 | Scalarprinted-media-combined-total | read-write | current | Total number of letter equivalently weighted pages both color and mono combined with this printer |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.10 | Scalarprinted-media-dimplex-count | read-only | current | Total number of mono dimplex pages printed in this media size. A dimplex page is one that has been printed in duplex mode but the back side is blank. Dimplex p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.11 | Scalarprinted-media-combined-simplex-count | read-only | current | Total number of simplex pages printed on this media size |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.12 | Scalarprinted-media-combined-duplex-count | read-only | current | Total number of duplex pages printed on this media size |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.15 | Scalarimpression-based-duplex-count-supported | read-only | current | The object is used to get the information on new duplex counting mechanism. With this new mechanism the Duplex count would represent actual Duplex count and no… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.2 | Scalarusage-printer-total-charge | read-only | current | Total printer charge for all paper sizes printed. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.3 | Scalarusage-average-toner-coverage | read-only | current | Reports the average toner area coverage of all pages printed over the life of the device. Counts pixels on each page, divides pixel count by pixels possible on… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.4 | Scalarusage-staple-count | read-only | current | Total number of staples used. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.5 | Scalarusage-instructions-line1 | read-write | current | The first line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.6 | Scalarusage-instructions-line2 | read-write | current | The second line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.7 | Scalarusage-instructions-line3 | read-write | current | The third line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.8 | Scalarusage-instructions-line4 | read-write | current | The fourth line of usage instructions for the device user.Appears on Line 1 of the usage page. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14 | Nodeprint-meter-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.2 | Scalarprint-meter-usage-threshold | read-only | current | A value indicating the threshold value for this category of pages. The device POS will indicate the units of measure for this threshold value |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.3 | Scalarprint-meter-print-quality | read-only | current | This enumeration describes the selected print quality for this category of printed pages |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.4 | Scalarprint-meter-simplex-count | read-only | current | Total number of simplex pages printed for this category of printed pages |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.5 | Scalarprint-meter-duplex-count | read-only | current | Total number of duplex pages printed for this category of printed pages |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.6 | Scalarprint-meter-total-charge | read-only | current | Total number of simplex plus duplex pages printed multiplied by the unit charge for each given media size for this category of printed pages |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.7 | Scalarprint-meter-dimplex-count | read-only | current | Total number of dimplex pages printed for this category of printed pages |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.8 | Scalarprint-meter-simplex-total | read-only | current | Total number of simplex pages printed for this category of printed pages |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.9 | Scalarprint-meter-duplex-total | read-only | current | Total number of duplex pages printed for this category of printed pages |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.10 | Scalarprint-meter-category-total | read-only | current | Total number of simplex plus duplex pages printed for this category of printed pages |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.14.11 | Scalarprint-meter-dimplex-total | read-only | current | Total number of dimplex pages printed for this category of printed pages |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2 | Nodescanner-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1 | Nodescanned-media-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.1 | Scalarscanned-media-simplex-count | read-only | current | Total number of simplex pages scanned, for this media size. Additional information: The 5 usage (simplex/duplex count, simplex/duplex click charge and paper si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.2 | Scalarscanned-media-simplex-charge | read-write | current | Charge for each simplex page printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.3 | Scalarscanned-media-duplex-count | read-only | current | Total number of duplex pages scanned, for this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.4 | Scalarscanned-media-duplex-charge | read-write | current | Charge for each duplex page scanned, for this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.1.5 | Scalarscanned-media-total-charge | read-only | current | The total charge for pages scanned, for this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.2 | Scalarusage-scanner-total-charge | read-only | current | Total scanner charge or cost for all paper sizes scanned. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3 | Nodeprinter-color-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1 | Nodeprinted-media-color-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.1 | Scalarprinted-media-color-simplex-count | read-only | current | Total number of color simplex pages printed in this media size |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.3 | Scalarprinted-media-color-duplex-count | read-only | current | Total number of color duplex pages printed in this media size |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.5 | Scalarprinted-media-color-total-count | read-only | current | The total count for color pages printed in this media size |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.6 | Scalarprinted-media-color-dimplex-count | read-only | current | Total number of color dimplex pages printed in this media size. A color dimplex page is a color page that has been printed in duplex mode but the back side is … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4 | Nodeprinted-modes-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4.1 | Nodeprinted-modes-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4.1.1 | Scalarprinted-modes-mono-count | read-only | current | Total number of mono pages printed in this fuser mode |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4.1.3 | Scalarprinted-modes-color-count | read-only | current | Total number of color pages printed in this fuser mode |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.4.1.5 | Scalarprinted-modes-total-count | read-only | current | The total count for pages printed in this fuser mode |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.5 | Nodesource-tray-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.5.1 | Nodesource-tray-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.5.1.1 | Scalarsource-tray-usage-count | read-only | current | Total number of pages printed from this source tray |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.6 | Nodedestination-bin-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.6.1 | Nodedestination-bin-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.6.1.1 | Scalardestination-bin-usage-count | read-only | current | Total number of pages printed to this destination bin |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18 | Nodefirmware-download | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.1 | Scalarfirmware-download-write-status-supported | read-only | current | This object provides information on whether the printer has the ability to communicate the write-status of the firmware download while the download is taking p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.2 | Scalarfirmware-download-write-time | read-only | current | If the design of the firmware-download implementation does not allow PML interaction during the download process, this value provides an estimation of the time… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.3 | Scalarfirmware-download-write-count | read-only | current | Tells the number of times that firmware has been downloaded to the flash part. Additional information: Tells the number of times that firmware has been downloa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.4 | Scalarfirmware-download-current-state | read-write | current | Provides the current or last reportable state of the firmware download process. The current state may not necessarily be the current state, but could be the po… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.5 | Scalarfirmware-download-maximum-write-count | read-only | current | Reports the manufacturer specified number of times that firmware can be downloaded to the flash part. A value of -1 means that there is no limit. A value of 0 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.6 | Scalarfirmware-download-name | read-only | current | This returns the name of the printer. This should match the name in the header of the upgrade image being sent to the flash part. If the name does not match wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.18.7 | Scalarfirmware-download-version | read-only | current | This object will return a string value representing the current revision of firmware that the printer is operating with. This is used to determine if code need… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.19 | Nodeoperating-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20 | Nodeupgradable-devices | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.1 | Scalarupgradable-devices-write-status-supported | read-only | current | This object provides information on whether the upgradable device has the ability to communicate the write-status of the upgrade while the upgrade is taking pl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.2 | Scalarupgradable-devices-write-time | read-only | current | If the design of the device upgrade implementation does not allow PML interaction during the download process, this value provides an estimation of the time wh… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.3 | Scalarupgradable-devices-write-count | read-only | current | Tells the number of times that firmware for device X has been downloaded to the flash part. The default value will vary depending on how many times the firmwar… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.4 | Scalarupgradable-devices-current-state | read-only | current | Provides the current or last reportable state of the device upgrade process. The current state may not necessarily be the current state, but could be the post-… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.5 | Scalarupgradable-devices-max-write-count | read-only | current | Reports the manufacturer specified number of times that firmware for device X can be downloaded to the flash part. A value of -1 means that there is no limit. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.6 | Scalarupgradable-devices-name | read-only | current | This returns the name of the upgradable device. This should match the name in the header of the upgrade image being sent to the flash part. If the name does no… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.7 | Scalarupgradable-devices-version | read-only | current | This object will return a string value representing the current revision of firmware that device X is operating with. This is used to determine if code needs t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.20.8 | Scalarremote-upgrade-enable | read-write | current | Enables or disables the ability to upgrade the firmware associated with any device that is available to be upgraded. This will be set to on or off at the RFU l… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22 | Nodewarninglog | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.1 | Nodewarning1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.2 | Nodewarning2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.3 | Nodewarning3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.4 | Nodewarning4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.5 | Nodewarning5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.6 | Nodewarning6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.7 | Nodewarning7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.8 | Nodewarning8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.9 | Nodewarning9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.10 | Nodewarning10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.11 | Nodewarning11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.12 | Nodewarning12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.13 | Nodewarning13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.14 | Nodewarning14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.15 | Nodewarning15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.16 | Nodewarning16 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.17 | Nodewarning17 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.18 | Nodewarning18 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.19 | Nodewarning19 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.20 | Nodewarning20 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.21 | Nodewarning21 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.22 | Nodewarning22 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.23 | Nodewarning23 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.24 | Nodewarning24 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.25 | Nodewarning25 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.26 | Nodewarning26 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.27 | Nodewarning27 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.28 | Nodewarning28 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.29 | Nodewarning29 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.30 | Nodewarning30 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.31 | Nodewarning31 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.32 | Nodewarning32 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.33 | Nodewarning33 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.34 | Nodewarning34 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.35 | Nodewarning35 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.36 | Nodewarning36 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.37 | Nodewarning37 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.38 | Nodewarning38 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.39 | Nodewarning39 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.40 | Nodewarning40 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.41 | Nodewarning41 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.42 | Nodewarning42 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.43 | Nodewarning43 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.44 | Nodewarning44 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.45 | Nodewarning45 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.46 | Nodewarning46 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.47 | Nodewarning47 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.48 | Nodewarning48 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.49 | Nodewarning49 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.22.50 | Nodewarning50 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25 | Nodesettings-system2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.1 | Scalartoner-miser-plus-value | read-write | current | This object is used to enable/disable toner miser plus feature |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.2 | Scalartoner-miser-plus-supported | read-only | current | The supported values are ON and OFF. The toner miser plus feature is turned OFF by default |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.17 | Scalarprotect-ews-info-tab | read-write | current | This PML object is used by the WJA tool to allow administrators to enable or disable EWS information tab protection. When this option in selected/turned on the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.19 | Scalareprint-opt-in | read-write | current | This object is the master switch for the ePrint feature. By default this should be eOff(1). This differs from EPRINT-ENABLED in that ePrint connot be registere… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.20 | Scalareprint-enabled | read-write | current | Returns the current setting of the ePrint feature |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.21 | Scalareprint-email-address | read-write | current | This is the configured ePrint email address |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.22 | Scalareprint-email | read-write | current | This object reports the current setting of ePrint e-mail |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.23 | Scalareprint-printer-code | read-write | current | This is the configured ePrint printer code |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.24 | Scalareprint-hp-web-services | read-write | current | This object reports the current setting of the ePrint web services |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.25 | Scalareprint-jdi-interface | read-write | current | This number represents the instance of jdi that has ePrint registered |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.31 | Scalareprint-supported | read-write | current | This object is used to indicate whether the device supports ePrint or not. By default this should be eOff(1), but will be set to eOn(2) if the device supports … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.32 | Scalareprint-supported-jdi | read-write | current | This object is used to indicate whether the JDI supports ePrint or not. By default this should be eOff(1), but will be set to eOn(2) if JDI supports ePrint |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.47 | Scalarfax-init-at-command | read-write | current | This custom fax modem commands will be executed on the modem every time a fax modem is initialized along with the predefined set of commands |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.59 | Scalarset-primary-interface-index | read-write | current | Sets the index of the primary network interface to be used for outbound routing. Index 1 is EIO, 2 is wireless station, 3 is wireless access point and 4 is JDI. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.25.60 | Scalarwireless-direct-print-setting | read-write | current | Enable or disable wireless direct printing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | Nodesource-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1 | Nodeio | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1 | Nodesettings-io | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.1 | Scalario-timeout | read-write | current | The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel tha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.2 | Scalario-switch | read-only | current | Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.5 | Scalario-buffering | read-write | current | Returns or controls the manner in which the device performs I/O data buffering. I/O data buffering allows additional print job data to be buffered by the I/O s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.6 | Scalario-buffer-size | read-write | current | Returns or configures the amount of memory, in bytes, dedicated to I/O print job data buffering. Attempting to set to an unsupported value causes the device to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.7 | Scalarmaximum-io-buffering-memory | read-only | current | This object's name is misleading. Returns the maximum amount of additional memory, in bytes, that can be dedicated to buffering print job data. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.2 | Nodestatus-io | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.2.1 | Scalarnot-ready-source-io | read-only | current | Indicates if the I/O sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the I/O sub-system is ready. I… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.2.2 | Scalarstatus-source-io | read-only | current | Indicates if the I/O sub-system in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3 | Nodeports | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1 | Nodeport1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.1 | Nodeparallel | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.1.4 | Scalarparallel-speed | read-write | current | Returns or changes the maximum parallel I/O port speed. An eSlow setting causes a 10 us busy pulse per received byte of data. An eFast setting causes a 1.5 us … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.1.5 | Scalarparallel-bidirectionality | read-write | current | Returns or changes whether the parallel I/O port supports bidirectional communication. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.4 | Scalarport1-parallel-speed | read-write | current | Returns or changes the maximum parallel I/O port speed, for port 1. This object is only supported if this port is a parallel port. An eSlow setting causes a 10… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.3.1.5 | Scalarport1-parallel-bidirectionality | read-write | current | Returns or changes whether the parallel I/O port supports bidirectional communication for port 1. This object is only supported if this port is a parallel port… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2 | Nodescanner | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1 | Nodesettings-scanner | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.1 | Scalarscan-contrast | read-write | current | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the scanner contrast level. Range is 0..100. Additional information: There are … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.2 | Scalarscan-resolution | read-write | current | struct { unsigned_32bit x_res; /* 1st four bytes; big endian */ unsigned_32bit y_res; /* 2nd four bytes; big endian */ } Sets the scanning resolution. The x an… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.3 | Scalarscan-pixel-data-type | read-write | current | Sets the method used when scanning. eBiLevelThesholded - One bit per pixel, using simple thresholding of greyscale scan data. eBiLevelHalfToned - One bit per p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.4 | Scalarscan-compression | read-write | current | Indicates the type of data compression applied to the image data in the scanning upload session. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.5 | Scalarscan-compression-factor | read-write | current | Indicates the level of compression to be applied to the scanned image data for upload. Range is normalized to be between 0..100. The device POS determines the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.6 | Scalarscan-upload-error | read-only | current | Error status of the image scanning upload session. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.12 | Scalarscan-upload | read-write | current | Handshake mechanism between host and device to initiate scan operation and coordinate the transfer of scanned image data to the host. This object serves both a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.16 | Scalardefault-scanner-margin-left | read-write | current | Sets the left scanner margin. The unit of measure should be documented in the device POS. Additional information: The margin value must be a multiple of 4 for … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.17 | Scalardefault-scanner-margin-right | read-write | current | Sets the right scanner margin. The unit of measure should be documented in the device POS. Additional information: The margin value must be a multiple of 4 for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.18 | Scalarscanner-accessory-serial-number | read-only | current | Identifies the serial number for the scanner accessory. If this is a writable object, the POS should indicate the maximum supported string length. This string … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.19 | Scalarscanner-accessory-model-number | read-only | current | Model number of the scanner accessory. This string should only use characters from the US-ASCII code set. Additional information: Model number for the Fujitsu … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.20 | Scalarscanner-accessory-adf-sheet-count | read-only | current | Total number of sheets that have been fed through the Automatic Document Feed (ADF) accessory. Additional information: The Automatic Document Feed (ADF) count … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.21 | Scalarscanner-accessory-flatbed-scan-count | read-only | current | Total number of scans performed by a flatbed scanner accessory. Additional information: The count is only incremented when a sheet is scanned on the FLATBED. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.22 | Scalarscanner-accessory-cleaning-interval | read-only | current | Recommended cleaning interval in units of sheets scanned. Additional information: Recommended cleaning interval is in units of sheets scanned. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.23 | Scalarscanner-accessory-cleaning-count | read-only | current | The number of sheets scanned since the last cleaning was performed. Additional information: The number of sheets that have gone through the ADF since the last … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.24 | Scalarscanner-accessory-maintenance-interval | read-only | current | Recommended maintenance interval in units of sheets scanned. Additional information: Recommended maintenance interval is in units of sheets scanned. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.25 | Scalarscanner-accessory-maintenance-count | read-only | current | The number of sheets scanned since the last maintenance was performed. Additional information: The number of sheets that have gone through the ADF since the la… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.26 | Scalarscanner-accessory-rom-revision | read-only | current | ROM revision of the scanner accessory firmware. Additional information: ROM revision of the Fujitsu scanner is downloaded from the scanner after the attached s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.27 | Scalarscanner-accessory-copy-processor-boot-revision | read-only | current | Boot ROM revision of scanner copy processor firmware. Boot code to initialize the copy processor, establish communications with the scanner, and load the runti… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.28 | Scalarscanner-accessory-copy-processor-runtime-revision | read-only | current | Revision of the runtime firmware for the scanner copy processor. Runtime code which retrieves scanned data from the scanner and sends it to other devices such … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.29 | Scalarscanner-accessory-service-agent-revision | read-only | current | Revision of scanner service agent firmware. Service agent which accepts scanned data and processes scanner copy processor requests, resident in a device such a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.30 | Scalarscanner-accessory-control-panel-user-interface-revision | read-only | current | Revision of the control panel user interface firmware. Additional information: Revision of the copy processor user interface firmware shipped on the disk. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.32 | Nodescan-calibration | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.32.18 | Scalarscan-calibration-target | read-only | current | This object is used by the host to check which type of calibration this scan device supports. The device pos will describe the meaning and intent of each type … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.33 | Scalarscanner-accessory-nvram | read-only | current | Returns the contents of the NVRAM (Non-Volatile RAM) located in the scanner accessory. Additional information: Read bytes 0..39 of the NVRAM in the scanner. Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.34 | Scalarscanner-accessory-nvram2 | read-only | current | Returns the second part of the contents of the NVRAM (Non-Volatile RAM) located in the scanner accessory. Additional information: Read bytes 40..79 of the NVRA… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.35 | Scalarscanner-accessory-nvram3 | read-only | current | Returns the third part of the contents of the NVRAM (Non-Volatile RAM) located in the scanner accessory. Additional information: Read bytes 80..119 of the NVRA… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.36 | Scalarscanner-accessory-nvram4 | read-only | current | Returns the fourth part of the contents of the NVRAM (Non-Volatile RAM) located in the scanner accessory. Additional information: Read bytes 120..127 of the NV… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.37 | Scalarui-add-option | read-write | current | Lets the host application set up target (eg.scan) destinations. The destinations can be a host network address and/or an application to be launched on that hos… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.38 | Scalarui-select-option | read-only | current | Triggers a job from the device based on the option selected. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.42 | Scalarui-delete-option | read-write | current | Lets the host application delete target eg. scan destinations that were setup with UI-ADD-OPTION. The host sends down the entire string that was sent earlier. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.43 | Scalarscanner-jam-page-count | read-write | current | Indicates a count of the total pages jammed in the scanner'slifetime. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.44 | Scalarscanner-adf-page-count | read-write | current | Indicates a count of the total pages scanned through the ADF on the device. This may include scan to host jobs, copyjobs, and fax jobs. If only the total pages… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.45 | Scalarscan-adf-page-count | read-write | current | Indicates the total pages scanned through the ADF to the host from the device. If the total pages scanned through the scanner are needed for all features, incl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.46 | Scalarscan-image-type | read-write | current | Indicates the image type of the scan data. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.47 | Scalarscan-subsample | read-write | current | Indicates the subsampling used for Scan Data. 4:1:1, 4:2:2, and 4:3:3 subsampling are used to modify the scan image quality and amount of scan data by reducing… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.48 | Scalarscanner-retrieve-scanline | read-write | current | This object facilitates the sending of a scan line of data from the scanner to a host. It grabs either raw or corrected data. SERVICE-PASSWORD must be set corr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.49 | Scalarscanner-motor-control | read-write | current | This objects is set to the number of steps that the scan motor should move. SERVICE-PASSWORD must be setcorrectly to use this object. Additional information: T… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.50 | Scalarscan-height | read-write | current | Used to set the height of a scan image in Decapoints. The use of Decapoints as units of measure eliminates the need for the user to understand the scanner mech… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.51 | Scalarscanner-scanline-statistics | read-only | current | This object is used to obtain statistics about the scan line that was previously obtained using the SCANNER-RETRIEVE-SCANLINE object. Just as SERVICE-PASSWORD … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.52 | Scalarscan-control-descriptor | read-only | current | Describes the control language and formats supported for this scanner. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.53 | Scalarscan-gamma-correction | read-write | current | A 32-bit quantity that indicates the gamma correction to use on the scan image. The first 16 bits indicate the integral portion of the gamma correction. The la… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.54 | Scalarscan-pad-image | read-write | current | Indicates if the scan image should be padded with white data or not. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.63 | Scalarscanner-accessory-total-copy-pages-printed | read-only | current | This relates to the number of copy pages printed on a device. The output sheet that is duplexed (made 2- sided) should be counted as 2 pages |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.73 | Scalarscan-flatbed-page-count | read-write | current | This object tracks the page count for the pages scanned from the flatbed. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.74 | Scalarscanner-flatbed-page-count | read-write | current | This object tracks the page count for the pages scanned for all jobs from the flatbed. This includes scan to host jobs, fax jobs, and copy jobs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.75 | Scalarscanner-modular-hardware | read-only | current | Used to specify whether optional hardware is installed or not. Additional information: This HP LaserJet MFP uses this object to allow a host to query whether o… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.84 | Scalarscanner-clock-edge-modifiers | read-write | current | This object accesses a table used by firmware to modify clock edge values for CCD scanner modules. Additional information: This object accesses a table used by… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.85 | Scalarscan-clock-edges | read-only | current | Returns a table of clock edges used by the scanner. Additional information: Returns a table of clock edges used by the scanner. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.86 | Scalarscan-emulate-copy | read-write | current | Setting this object to eYes will cause firmware to run the next scan job as if it were a copy job, using copy values for scanner h/w and image processing, and … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2 | Nodestatus-scanner | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.1 | Scalarnot-ready-source-scanner | read-only | current | Indicates whether and why the scanner is not ready. A set bit indicates a problem. Additional information: ISSUES: HP LaserJet 1100 only used cScannerFeederJam… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.3 | Scalarscan-resolution-range | read-only | current | Enumerates the range of selectable scanning resolutions. Format as follows: Each supported resolution is in the format: (m)x(n) where m describes the x dpi res… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.5 | Scalarscan-calibration-download | read-write | current | Returns or changes the state of the calibration operation. cScanCalibrationIdle - indicates that calibration is not in progress. cScanCalibrationStart - This s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.6 | Scalarscan-calibration-error | read-only | current | Error status of the most recent calibration session. eNoError(1) - The calibation was successful. eUnknownCalibrationError(2) - An unknown error occurred. eSca… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.7 | Scalarscanner-button-status | read-write | current | Indicates the scanner button has been pressed. The value changes to eOn(2) when the button is pressed. The host acknowledges the button press by setting the va… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.8 | Scalarscanner-lamp-gain-value | read-only | current | Provides PWM and analog gain for the color channels. The range will vary based on scan mode. The device specific POS should describe the valid range. The forma… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.9 | Scalarscanner-light-monitor-window | read-only | current | Provides the pixel at which the LMW starts, as the ratio of the average LMW value to the six pixel average value. The device specific pos should specify the va… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.10 | Scalarscanner-reference-position | read-only | current | Provides 3 pairs of x,y coordinates within a specified range of the calibrate reference position. The device specific POS should specify the valid ranges. The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.11 | Scalarscanner-sensor-manufacturer | read-only | current | Reports the scan sensor manufacturer. The device specific POS should list valid manufacturers. Additional information: Reports the scan sensor manufacturer. Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.2.13 | Scalarcopy-scanner-dimensions | read-only | current | This object is used to obtain the exact pixel scan dimensions for copy. The dimensions returned correspond to the quality, reduce/enlarge, and media size curre… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.3 | Nodefax-receive | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.3.1 | Nodesettings-fax-receive | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.3.1.1 | Scalarfax-receive-stamping-enable | read-write | current | Controls whether or not incoming pages of a fax will be stamped upon receipt. Content of the stamp is device- specific but may include such information as date… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.3.2 | Nodestatus-fax-receive | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.3.2.1 | Scalarnot-ready-fax-receive | read-only | current | Indicates if the receiving fax sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the receiving fax su… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.4 | Nodespooler | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.4.1 | Nodesettings-spooler | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.4.1.1 | Scalarmopy-mode | read-write | current | Controls or reports how mopies are generated. eOff turns off the mopy feature. eAuto allows the device to determine the best method for generating mopies based… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3 | Nodeprocessing-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3 | Nodepdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1 | Nodesettings-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.2 | Scalardefault-orientation | read-write | current | Returns or changes the default orientation. The list of supported values should be documented in the device POS. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | Scalardefault-copies | read-write | current | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 | Scalarform-feed | read-write | current | Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as close page or eject page. If th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.6 | Scalarresource-saving | read-write | current | Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another PDL is active. Resource saving i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.7 | Scalarmaximum-resource-saving-memory | read-only | current | This object's name is misleading. This object returns the maximum amount of additional memory, in bytes, that can be dedicated to holding PDL permanent soft re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | Scalardefault-vertical-black-resolution | read-write | current | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In LaserJet 4050 Series changing th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 | Scalardefault-horizontal-black-resolution | read-write | current | Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In LaserJet 4050 Series changing … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10 | Scalardefault-page-protect | read-write | current | Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 | Scalardefault-lines-per-page | read-write | current | Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest sup… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 | Scalardefault-vmi | read-write | current | Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupport… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | Scalardefault-media-size | read-write | current | This indicates the default media size. A write of an unsupported value causes an <badValue>. Complete list of supported media sizes along with their dimensions… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 | Scalarcold-reset-media-size | read-write | current | Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22 | Scalardefault-media-name | read-write | current | Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This string must be one of the MEDI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 | Scalarreprint | read-write | current | Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the device will not attempt to reprint… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.37 | Scalarwide-a4 | read-write | current | Returns or changes the wide A4 logical page size setting. If eOn, then the margins/printable area of A4 paper will be changed to allow 80 10-pitch characters t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.38 | Scalardark-courier | read-write | current | Returns or changes the dark Courier setting. If eOn, then the Courier font used will approximate the same darkness as the LaserJet III printer. If eOff, then t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 | Scalardefault-bits-per-pixel | read-write | current | Controls the number of levels used (per pixel) when printing grayscale or color images. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2 | Nodestatus-pdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2.1 | Scalarnot-ready-processing-pdl | read-only | current | Indicates if the PDL sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the PDL sub-system is ready. I… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.2.2 | Scalarform-feed-needed | read-only | current | Indicates if the PDL processing sub-system has made marks on the current page and the source subsystem has been idle for a device specific amount of time. Addi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3 | Nodepdl-pcl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.1 | Scalarpcl-datecode | read-only | current | This indicates the PCL firmware date code in yyyymmdd format. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2 | Scalarpcl-resource-saving-memory-size | read-write | current | Returns or changes the amount of resource saving memory set aside to hold permanent soft PCL resources. Additional information: The value returned by this obje… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.3 | Scalarpcl-name | read-only | current | Contains the name of the PDL. For PCL, the name is `PCL'. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.4 | Scalarpcl-version | read-only | current | Contains the PDL version. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5 | Scalarpcl-total-page-count | read-only | current | Total number of PCL pages printed by the device. Additional information: In LaserJet 4050 Series the PCL page count is kept in NVRAM, and the NVRAM value is up… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.11 | Scalarpcl-default-symbol-set | read-write | current | Returns or changes the default PCL symbol set. The enumeration values match the values supported by the PCL Symbol Set Code escape sequence, <ESC>*c#R. The bin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13 | Scalarpcl-default-font-height | read-write | current | Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoint is 1/7200 inch. Height applies… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14 | Scalarpcl-default-font-source | read-write | current | Returns or changes the value of the default font source variable in NVRAM. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15 | Scalarpcl-default-font-number | read-write | current | Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an <badValue>. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.16 | Scalarpcl-default-font-width | read-write | current | Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4 | Nodepdl-postscript | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.1 | Scalarpostscript-datecode | read-only | current | This indicates the PostScript firmware datecode in yyyymmdd format. Additional information: This object is only supported if PostScript option is installed. Re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.2 | Scalarpostscript-resource-saving-memory-size | read-write | current | Returns or changes the amount of resource saving memory set aside to hold permanent soft PostScript resources. Additional information: The value returned by th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.3 | Scalarpostscript-name | read-only | current | Contains the name of the PDL. For PostScript, the name is `PostScript'. Additional information: This object is only supported if PostScript option is installed… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.4 | Scalarpostscript-version | read-only | current | Contains the PDL version. Additional information: This object is only supported if PostScript option is installed. Returns <noSuchName> status if attempting to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.5 | Scalarpostscript-total-page-count | read-only | current | Total number of PostScript pages printed by the device. Additional information: This object is only supported if the PostScript option is installed. In LaserJe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.11 | Scalarpostscript-print-errors | read-write | current | Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.12 | Scalarpostscript-jam-recovery | read-write | current | Returns or changes the PostScript jam recovery setting. If eOn, then the device will reprint PostScript pages, if those pages jam. Additional information: This… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.14 | Scalarpostscript-defer-media | read-write | current | This object will be used to enable or disable the use of the Adobe Postscript Paper Handling Model in the printer firmware. By default it is enabled which mean… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.5 | Nodepdl-esc-p | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.5.1 | Scalaresc-p-datecode | read-only | current | This indicates the ESC-P PDL datecode. The datecode format is yyyymmdd. Additional information: This object is only supported if ESC-P option is installed. Ret… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.5.3 | Scalaresc-p-name | read-only | current | Contains the name of the PDL. For ESC-P, the name is `ESC-P'. Additional information: This object is only supported if ESC-P option is installed. Returns an <n… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.5.4 | Scalaresc-p-version | read-only | current | Contains the PDL version. Additional information: This object is only supported if ESC-P option is installed. Returns an <noSuchName> status if attempting to p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15 | Nodepdl-pdf | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.1 | Scalarpdf-version | read-only | current | Contains version of PDF that is supported on the device |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.2 | Scalarpdf-total-page-count | read-only | current | Total number of PDF pages printed by the device |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.3 | Scalarpdf-enabled | read-only | current | Used to tell whether the device supports PDF |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.15.4 | Scalarpdf-print-errors | read-write | current | Returns or changes the value of the print PDF errors setting. If eOn, PDF prints an error page showing the error encountered and the stack at the time of the e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.16 | Nodepdl-pclxl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.16.1 | Scalarpclxl-total-page-count | read-write | current | Total number of PCLXL pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.4 | Nodepml | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5 | Nodepjl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.5.1 | Scalarpjl-password | read-only | current | Returns PJL password, if the password is not set (zero). If the password is set, then attempting to retrieve the password causes an <genErr> to occur and will … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7 | Nodefax-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1 | Nodesettings-fax-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.1 | Scalarfax-rxscale | read-write | current | Received faxes are to be printed at a reduced scale percentage. Value of 0 indicates auto-scaled printing based on the length of the received fax image and the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.3 | Scalarfax-noise-volume | read-write | current | Range is 0..100, where 0 = quietest possible, and 100 = loudest possible. A device shall divide this value into ranges corresponding to the possible volumes. A… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.6 | Scalarfax-download | read-write | current | Note: Changed enumeration values in a non-backwards manner in version 4.7. Handshake mechanism between host and device to initiate and coordinate the download … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.7 | Scalarfax-silent-detection | read-write | current | When enabled, this object causes the FAX machine to assume that the caller is a FAX even though the line has remained silent for a time (i.e., no CNG detected)… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.8 | Scalarfax-ring-enable | read-write | current | When the phone line rings, this object determines whether an audible ring shall be emitted. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.9 | Scalarfax-country | read-write | current | Note: Non-backwards compatible change make in version 4.7. Returns which country the telephone-electronics (LIU) is configured for. If this object is implement… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.10 | Scalarfax-tx-phone-number | read-write | current | Phone number about to be dialed. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.14 | Scalarfax-redial-time | read-only | current | Number of seconds one must wait between the current redial (set by FAX-WHICH-REDIAL) and any prior dialing. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.18 | Scalarfax-pstn-access-code | read-write | current | The code used within a PBX to get access to an outside PSTN line. Typically this is ''9''. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.19 | Scalarfax-rx-disposition | read-write | current | Indicates what is to be done with the incoming fax call. ePrintOnly - New fax arrivals only go to the printer. If printer becomes unavailable, the fax is store… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.21 | Scalarfax-error-correction-mode | read-write | current | Indicates whether the device is configured to send and receive faxes in error correction mode (ECM). This object controls both receiving and transmitting in EC… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.22 | Scalarfax-report-transmission | read-write | current | Provides a host application with the ability to print a fax transmission report. The supported enumerations are: eNone - no transmission report printed ePrintR… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.23 | Scalarfax-report-activity-log | read-write | current | Specifies when a report of fax transactions is to be printed. eNever - to never print a transaction report. eThreshold - to automatically print a transaction r… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.24 | Scalarfax-dial-tone-detection | read-write | current | Determines whether the fax machine waits for a dial tone before dialing a fax number. eEnabled - causes the fax machine to wait until a dial tone is recognized… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.25 | Scalarfax-alarm-volume | read-write | current | Range is 0..100, where 0 = quietest possible, and 100 = loudest possible. A device shall divide this value into ranges corresponding to the possible volumes an… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.26 | Scalarfax-beep-volume | read-write | current | Range is 0..100, where 0 = quietest possible, and 100 = loudest possible. A device shall divide this value into ranges corresponding to the possible volumes an… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.27 | Scalarfax-ring-volume | read-write | current | Range is 0..100, where 0 = quietest possible, and 100 = loudest possible. A device shall divide this value into ranges corresponding to the possible volumes an… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.28 | Scalarfax-master-host | read-write | current | Identifies the hostname of the master host to which the device is connected. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.29 | Scalarfax-thumbnail-enable | read-write | current | Controls whether or not a thumbnail reprint of the first page of a fax shall be included on the fax call report. When set to eEnabled a thumbnail shall be incl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.30 | Scalarfax-phone-pickup-enable | read-write | current | This object is included to handle the situation where a fax machine and a telephone share the same phone line. If a call picked up at the phone turns out to be… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.31 | Scalarfax-adf-scan-count | read-write | current | This object tracks the page count for the pages scanned for faxing from the ADF. In order to write this object SERVICE-PASSWORD must be set correctly. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.32 | Scalarfax-print-page-count | read-write | current | This object tracks the page count for the pages sent to the print engine for fax jobs. In order to write this object SERVICE-PASSWORD must be set correctly. Ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.33 | Scalarfax-download-page-count | read-write | current | This object tracks the page count for the pages downloaded to the peripheral for fax jobs. In order to write this object SERVICE-PASSWORD must be set correctly… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.34 | Scalarfax-upload-page-count | read-write | current | This object tracks the page count for the pages uploaded from the peripheral for fax jobs. In order to write this object SERVICE-PASSWORD must be set correctly… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.36 | Scalarfax-flatbed-scan-count | read-write | current | This object tracks the page count for the pages scanned for faxing from the flatbed. In order to write this object the SERVICE-PASSWORD must be set. Additional… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.37 | Scalardefault-fax-glass-size | read-write | current | Indicates the default fax glass size. Additional information: Indicates the default fax glass size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.38 | Scalarfax-cold-reset-fax-glass-size | read-write | current | Returns or sets the fax glass size that is used as the DEFAULT-FAX-GLASS-SIZE when a cold reset occurs. Additional information: Returns or sets the fax glass s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2 | Nodestatus-fax-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.1 | Scalarfax-upload | read-write | current | Note: The enumeration values for this object where changed in a non-backwards compatible manner in version 4.7. Handshake mechanism between host and device to … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.2 | Scalarfax-min-rings-pickup | read-only | current | Indicates the minimum legal rings before pickup. Additional information: GECKO NOTE: Do all countries on the HP Laserjet 3200 list allow a minimum of 1? If not… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.3 | Scalarfax-max-rings-pickup | read-only | current | Indicates the maximum legal rings before pickup. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.4 | Scalarfax-max-redials | read-only | current | Maximum number of allowed redials. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.5 | Scalarfax-additional-wait | read-only | current | Number of additional seconds to wait before beginning a FAX-DOWNLOAD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.6 | Scalarfax-download-error | read-only | current | Error status of the fax download session. Additional information: GECKO NOTE: What error conditions will be reported by this object? Provide a map for the mean… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.7 | Scalarfax-upload-error | read-only | current | Error status of the fax upload session. Additional information: GECKO NOTE: What error conditions will be reported by this object? Provide a map for the meanin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.8 | Scalarfax-firmware-revision | read-only | current | This object identifies the fax firmware ROM revision code. The format is device specific and shall be specified in the device POS. Additional information: This… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.3 | Nodefax-forwarding | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.3.3 | Scalarfax-forwarding-phone-num | read-write | current | Phone number digits of the remote fax station where arrived faxes are to be forwarded. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.8 | Nodejetsend-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.8.1 | Nodesettings-jetsend | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.8.1.1 | Scalarjetsend-mode | read-write | current | Enables or disables the JetSend processing sub-system. Additional information: Enables or disables the JetSend processing subsystem. The valid values are eOff … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.8.3 | Nodejetsend-contact | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.8.3.1 | Nodesettings-jetsend-contact | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.8.3.1.1 | Scalarjetsend-contact-password | read-write | current | A C structure containing the following fields: typedef struct { ubyte old_password[8]; ubyte new_password[8];/ } jetsend_change_contact_password_t; where ubyte… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.8.3.1.2 | Scalarjetsend-contact-ip-address-security | read-write | current | A C structure containing the following fields: typedef struct { ubyte reserved[3]; ubyte command; /* command: 0 to 1 */ ubyte password[8]; ubyte IPAddress[4]; … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.9 | Nodewebserver-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.9.1 | Nodesettings-webserver | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | Nodedestination-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | Nodeprint-engine | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1 | Nodesettings-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.2 | Scalaroverride-media-name | read-write | current | Sets a string identifying the media name that is to be used in place of the currently requested media. The substitution will continue until another media is se… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.3 | Scalaroverride-media-size | read-write | current | Sets the media size that is to be used in place of the currently requested media size. Additional information: When a request is received to print on a size an… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.5 | Scalarprint-density | read-write | current | Returns or sets the print density setting. Print density is the instantaneous amount of marking agent applied to the paper while printing. A value of zero has … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.8 | Scalartransfer-setting | read-write | current | When set the object will cause the transfer setting of the device to be changed to the nearest appropriate value. When the object is read it will return the cu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.9 | Nodemarking-agent-density | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.1.13 | Scalarseparation-setting | read-write | current | When set this object will cause the separation setting of the device to be changed to the nearest appropriate value. When the object is read it will return the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2 | Nodestatus-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.1 | Scalarnot-ready-destination-print-engine | read-only | current | Indicates if the print engine sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the print engine sub-… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.3 | Scalarnot-ready-laser-print-engine | read-only | current | Indicates if the laser print engine sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the laser print… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.5 | Scalartotal-engine-page-count | read-write | current | Total number of pages printed by the device. POS indicates if the total engine page count is kept in NVRAM, and the maximum supported value before the page cou… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.6 | Scalartotal-mono-page-count | read-write | current | Total number of black pages printed by the device. Additional information: Total number of mono pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.7 | Scalartotal-color-page-count | read-only | current | Total number of color pages printed by the device. Additional information: Any page with one or more color pixels is counted as a color page. Pages that only c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.8 | Scalarstatus-destination-print-engine | read-only | current | Indicates if part of the print engine sub-system is not functional, but the non-functional component(s) are not currently required to print. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.22 | Scalarduplex-page-count | read-only | current | Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, regardless of whether or not mark… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.26 | Scalarprint-engine-revision | read-only | current | Print engine revision string. Additional information: The symbol set for this string is Roman-8. Converts engine revision number to a string and returns it. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.34 | Scalarprint-engine-jam-count | read-write | current | Total number of pages jammed in the print engine's life time. The POS indicates if the total jam count is kept in NVRAM and the maximum supported value before … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.35 | Scalarprint-engine-mispick-count | read-write | current | Total number of pages mispicked in the print engine's life time. The POS indicates if the total mispick count is kept in NVRAM and the maximum supported value … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.37 | Nodeprinter-calibration-dhalf | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.37.3 | Nodeprinter-cal-dhalf-data | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.37.6 | Nodeprinter-cal-grayaxis | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.37.7 | Nodeprinter-cal-grayaxis-data | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.38 | Nodeprinter-calibration-cpr | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | Nodeintray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1 | Nodesettings-intray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.4 | Scalardefault-manual-feed | read-write | current | Returns or changes the default manual feed value used by the PDLs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.5 | Scalarmp-tray | read-write | current | Returns or changes the value of the multi-purpose (MP) tray configuration variable. The MP tray can be configured to operate as an additional input tray (eCass… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.6 | Scalartray-lock | read-write | current | Returns or changes the list of locked input trays. The printer only pulls media from a locked input tray when the input tray is specifically requested by the p… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.7 | Scalarcustom-paper-dim-unit | read-write | current | The units of measure used to specify the width and height of the printer's custom paper. The unit of measure of eTenThousandthsOfInches is 0.0001 inches. Addit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.8 | Scalarcustom-paper-feed-dim | read-write | current | Sets the printer's custom paper dimension in the feed direction (direction parallel to the direction of paper feeding). The value for this object is specified … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.9 | Scalarcustom-paper-xfeed-dim | read-write | current | Sets the printer's custom paper dimension in the cross- feed direction (direction ninety degrees relative to the direction of paper feeding). The value for thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2 | Nodestatus-intray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2.1 | Scalarnot-ready-tray-missing | read-only | current | Indicates which trays are not currently installed that is caused the device to be not ready. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2.2 | Scalarnot-ready-tray-empty | read-only | current | Indicates which trays contain no media causing the device to be not ready. Some devices may treat tray missing as a tray empty condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2.3 | Scalarstatus-tray-missing | read-only | current | Indicates which trays are not currently installed that is caused the device to be in a warning condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2.4 | Scalarstatus-tray-empty | read-only | current | Indicates which trays contain no media causing the device to be in a warning condition. Some devices may treat tray missing as a tray empty condition. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | Nodeintrays | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1 | Nodeintray1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.1 | Scalartray1-media-size-loaded | read-write | current | Returns the media size that is currently loaded in tray #1. This object can be set to indicate the media size currently loaded, if the printer supports input t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.2 | Scalartray1-media-available | read-only | current | Returns a number that indicates how full the input tray is. If the device can only detect empty / not empty the device returns -1 for not empty and 0 for empty… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.3 | Scalartray1-name | read-only | current | Returns the device specific name for tray 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.4 | Scalartray1-media-name | read-write | current | Contains a string identifying the media that is currently loaded in tray #1. The media name string is the name associated with the loaded media. The strings id… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.10 | Scalartray1-custom-media-width | read-only | current | Width of media (in decipoints) loaded in tray 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.11 | Scalartray1-custom-media-length | read-only | current | Length of media (in decipoints) loaded in tray 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.12 | Scalartray1-phd | read-only | current | Provides the number of the Paper Handling Device that contains this input tray. Additional information: The internal trays belong to device 0, which is the bas… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.13 | Scalartray1-fuser-temperature | read-write | current | The fuser temperature to be used when printing media from Tray 1. The value zero is the default temperature. Values less than zero are progressively lower and … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.17 | Scalartray1-type | read-write | current | Indicates the type of input media support installed. eTray (1) if the paper source is a tray eManualRoll (2) if the paper source is a manually loaded roll eArs… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.20 | Scalartray1-media-key | read-only | current | Contains the media key (index) in the database. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2 | Nodeintray2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.1 | Scalartray2-media-size-loaded | read-write | current | Returns the media size that is currently configured in tray #2. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.2 | Scalartray2-media-available | read-only | current | Returns a number that indicates how full the input tray is. If the device can only detect empty / not empty the device returns -1 for not empty and 0 for empty… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.3 | Scalartray2-name | read-only | current | Returns the device specific name for tray 2. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.4 | Scalartray2-media-name | read-write | current | Contains a string identifying the media that is currently loaded in tray 2. See TRAY1-MEDIA-NAME for a complete description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.10 | Scalartray2-custom-media-width | read-only | current | Width of media (in decipoints) loaded in tray 2. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.11 | Scalartray2-custom-media-length | read-only | current | Length of media (in decipoints) loaded in tray 2. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.12 | Scalartray2-phd | read-only | current | Provides the number of the Paper Handling Device that contains this input tray. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.13 | Scalartray2-fuser-temperature | read-write | current | The fuser temperature to be used when printing media from Tray 2. The value zero is the default temperature. Values less than zero are progressively lower and … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.17 | Scalartray2-type | read-write | current | Indicates the type of input media support installed. eTray (1) if the paper source is a tray eManualRoll (2) if the paper source is a manually loaded roll eArs… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.20 | Scalartray2-media-key | read-only | current | Contains the media key (index) in the database. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3 | Nodeintray3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.1 | Scalartray3-media-size-loaded | read-write | current | Returns the media size that is currently configured in tray #3. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.2 | Scalartray3-media-available | read-only | current | Returns a number that indicates how full the input tray is. If the device can only detect empty / not empty the device returns -1 for not empty and 0 for empty… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.3 | Scalartray3-name | read-only | current | Returns the device specific name for tray 3. Additional information: This object is only supported if a LC is installed. Returns <noSuchName> status if attempt… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.4 | Scalartray3-media-name | read-write | current | Contains a string identifying the media that is currently loaded in tray 3. See TRAY1-MEDIA-NAME for a complete description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.10 | Scalartray3-custom-media-width | read-only | current | Width of media (in decipoints) loaded in tray 3. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.11 | Scalartray3-custom-media-length | read-only | current | Length of media (in decipoints) loaded in tray 3. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.12 | Scalartray3-phd | read-only | current | Provides the number of the Paper Handling Device that contains this input tray. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.13 | Scalartray3-fuser-temperature | read-write | current | The fuser temperature to be used when printing media from Tray 3. The value zero is the default temperature. Values less than zero are progressively lower and … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.17 | Scalartray3-type | read-write | current | Indicates the type of input media support installed. eTray (1) if the paper source is a tray eManualRoll (2) if the paper source is a manually loaded roll eArs… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.20 | Scalartray3-media-key | read-only | current | Contains the media key (index) in the database. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.4 | Nodeintray4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.4.1 | Scalartray4-media-size-loaded | read-only | current | Returns the media size that is currently configured in tray #4. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.4.12 | Scalartray4-phd | read-only | current | Provides the number of the Paper Handling Device that contains this input tray. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5 | Nodeintray5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.1 | Scalartray5-media-size-loaded | read-write | current | Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.4 | Scalartray5-media-name | read-write | current | Contains a string identifying the media that is currently loaded in tray 4. See TRAY1-MEDIA-NAME for a complete description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.10 | Scalartray5-custom-media-width | read-only | current | Width of media (in decipoints) loaded in tray 4. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.11 | Scalartray5-custom-media-length | read-only | current | Length of media (in decipoints) loaded in tray 4. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.12 | Scalartray5-phd | read-only | current | Provides the number of the Paper Handling Device that contains this input tray. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.17 | Scalartray5-type | read-write | current | Indicates the type of input media support installed. eTray (1) if the paper source is a tray eManualRoll (2) if the paper source is a manually loaded roll eArs… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.20 | Scalartray5-media-key | read-only | current | Contains the media key (index) in the database. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6 | Nodeintray6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6.1 | Scalartray6-media-size-loaded | read-only | current | Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6.12 | Scalartray6-phd | read-only | current | Provides the number of the Paper Handling Device that contains this input tray. Additional information: The internal trays belong to device 0 (base engine), th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.7 | Nodeintray7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.7.1 | Scalartray7-media-size-loaded | read-only | current | Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Si… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.7.12 | Scalartray7-phd | read-only | current | Provides the number of the Paper Handling Device that contains this input tray. Additional information: The internal trays belong to device 0 (base engine), th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4 | Nodeoutbin | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.1 | Nodesettings-outbin | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.1.4 | Scalaroverflow-bin | read-write | current | Returns or sets the bin that will be used for additional sheets of media when the current bin is full and printing is allowed to continue. Additional informati… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3 | Nodeoutbins | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1 | Nodeoutbin1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.1 | Scalaroutbin1-maximum-capacity | read-only | current | Maximum capacity of the output bin, in sheets of 20 pound paper. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.1.9 | Scalaroutbin1-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.2 | Nodeoutbin2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.2.9 | Scalaroutbin2-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3 | Nodeoutbin3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.9 | Scalaroutbin3-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.10 | Scalaroutbin3-maximum-binding | read-only | current | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.11 | Scalaroutbin3-phd | read-only | current | Provides the number of the Paper Handling Device that contains this output bin. Additional information: This object will return the the device number that cont… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.12 | Scalaroutbin3-error-info | read-only | current | A device specific description of the last error encountered for output bin 3. Each POS should document the meaning of all supported error information. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4 | Nodeoutbin4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.9 | Scalaroutbin4-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.10 | Scalaroutbin4-maximum-binding | read-only | current | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.11 | Scalaroutbin4-phd | read-only | current | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5 | Nodeoutbin5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.9 | Scalaroutbin5-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.10 | Scalaroutbin5-maximum-binding | read-only | current | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.11 | Scalaroutbin5-phd | read-only | current | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6 | Nodeoutbin6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.9 | Scalaroutbin6-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.10 | Scalaroutbin6-maximum-binding | read-only | current | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.11 | Scalaroutbin6-phd | read-only | current | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7 | Nodeoutbin7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.9 | Scalaroutbin7-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.10 | Scalaroutbin7-maximum-binding | read-only | current | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.11 | Scalaroutbin7-phd | read-only | current | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8 | Nodeoutbin8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.9 | Scalaroutbin8-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.10 | Scalaroutbin8-maximum-binding | read-only | current | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.11 | Scalaroutbin8-phd | read-only | current | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9 | Nodeoutbin9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.9 | Scalaroutbin9-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.10 | Scalaroutbin9-maximum-binding | read-only | current | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.11 | Scalaroutbin9-phd | read-only | current | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.12 | Scalaroutbin9-error-info | read-only | current | A device specific description of the last error encountered for output bin 9. Each POS should document the meaning of all supported error information. Addition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10 | Nodeoutbin10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10.9 | Scalaroutbin10-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10.10 | Scalaroutbin10-maximum-binding | read-only | current | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10.11 | Scalaroutbin10-phd | read-only | current | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11 | Nodeoutbin11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11.9 | Scalaroutbin11-override-mode | read-write | current | Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11.10 | Scalaroutbin11-maximum-binding | read-only | current | The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job ha… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11.11 | Scalaroutbin11-phd | read-only | current | Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5 | Nodemarking-agent | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5.1 | Nodesettings-marking-agent | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.5.1.3 | Scalarlow-marking-agent-processing | read-write | current | Returns or changes how the device processes a low marking agent event. If eCont, then the device continues to print. If eStop, then the device stops until a co… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6 | Nodeimaging | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.5 | Scalardefault-ret | read-write | current | Returns or changes the Resolution Enhancement Technology setting. Devices that only support eOff and on should map all other values to on and always return the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.6.7 | Scalardefault-print-quality | read-write | current | Returns or sets the default print quality. A value of zero has the lowest print quality. A value of 100 has the highest print quality. Each POS should document… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7 | Nodeph | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.1 | Nodesettings-ph | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3 | Nodeph-devices | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.2 | Nodeph2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.2.2 | Scalarphd2-device-specific-command | read-write | current | This object is used to send device-specific data to the paper handling device. The meaning of the device- specific command is dependent on the paper handling d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.2.4 | Scalarphd2-device-memory | read-only | current | This object is used to read the current values stored in shared memory available from the paper handling device. Additional information: If at least one (1) ex… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.3 | Nodeph3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.3.2 | Scalarphd3-device-specific-command | read-write | current | This object is used to send device-specific data to the paper handling device. The meaning of the device- specific command is dependent on the paper handling d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.3.4 | Scalarphd3-device-memory | read-only | current | This object is used to read the current values stored in shared memory available from the paper handling device. Additional information: If at least two (2) ex… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.4 | Nodeph4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.4.2 | Scalarphd4-device-specific-command | read-write | current | This object is used to send device-specific data to the paper handling device. The meaning of the device- specific command is dependent on the paper handling d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.4.4 | Scalarphd4-device-memory | read-only | current | This object is used to read the current values stored in shared memory available from the paper handling device. Additional information: If at least three (3) … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.5 | Nodeph5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.5.2 | Scalarphd5-device-specific-command | read-write | current | This object is used to send device-specific data to the paper handling device. The meaning of the device- specific command is dependent on the paper handling d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.5.4 | Scalarphd5-device-memory | read-only | current | This object is used to read the current values stored in shared memory available from the paper handling device. Additional information: If at least four (4) e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.6 | Nodeph6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.6.2 | Scalarphd6-device-specific-command | read-write | current | This object is used to send device-specific data to the paper handling device. The meaning of the device- specific command is dependent on the paper handling d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.7.3.6.4 | Scalarphd6-device-memory | read-only | current | This object is used to read the current values stored in shared memory available from the paper handling device. Additional information: If at least five (5) e… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8 | Nodeprint-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1 | Nodesettings-print-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.1 | Scalarmedia-names-available | read-write | current | The value of this object controls which of the MEDIAx- NAME objects are supported. If a bit is set to zero, then attempting to get or set the corresponding MED… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.2 | Scalarnorth-edge-offset | read-write | current | Returns or sets the number of 300 dpi dots by which the image is shifted. Shift is relative to the leading edge of the medium as the medium flows through the m… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3 | Nodemedia-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1 | Nodemedia1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.1 | Scalarmedia1-name | read-only | current | Media 1 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.2 | Scalarmedia1-short-name | read-only | current | Length restricted version of the media name 1. The length restriction is required to allow the media name to be displayed on the device's control panel. The de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.3 | Scalarmedia1-page-count | read-only | current | Number of sheets of media 1 that have been printed. The device POS should state whether this value is lost across a power cycle or kept in NVRAM. Additional in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.4 | Scalarmedia1-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: The eng… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2 | Nodemedia2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.1 | Scalarmedia2-name | read-only | current | Media 2 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.2 | Scalarmedia2-short-name | read-only | current | Length restricted version of the media name 2. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.3 | Scalarmedia2-page-count | read-only | current | Number of sheets of media 2 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.4 | Scalarmedia2-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3 | Nodemedia3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.1 | Scalarmedia3-name | read-only | current | Media 3 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.2 | Scalarmedia3-short-name | read-only | current | Length restricted version of the media name 3. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.3 | Scalarmedia3-page-count | read-only | current | Number of sheets of media 3 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.4 | Scalarmedia3-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4 | Nodemedia4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.1 | Scalarmedia4-name | read-only | current | Media 4 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.2 | Scalarmedia4-short-name | read-only | current | Length restricted version of the media name 4. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.3 | Scalarmedia4-page-count | read-only | current | Number of sheets of media 4 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.4 | Scalarmedia4-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5 | Nodemedia5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.1 | Scalarmedia5-name | read-only | current | Media 5 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.2 | Scalarmedia5-short-name | read-only | current | Length restricted version of the media name 5. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.3 | Scalarmedia5-page-count | read-only | current | Number of sheets of media 5 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.4 | Scalarmedia5-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6 | Nodemedia6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.1 | Scalarmedia6-name | read-only | current | Media 6 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.2 | Scalarmedia6-short-name | read-only | current | Length restricted version of the media name 6. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.3 | Scalarmedia6-page-count | read-only | current | Number of sheets of media 6 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.4 | Scalarmedia6-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7 | Nodemedia7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.1 | Scalarmedia7-name | read-only | current | Media 7 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.2 | Scalarmedia7-short-name | read-only | current | Length restricted version of the media name 7. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.3 | Scalarmedia7-page-count | read-only | current | Number of sheets of media 7 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.4 | Scalarmedia7-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8 | Nodemedia8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.1 | Scalarmedia8-name | read-only | current | Media 8 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.2 | Scalarmedia8-short-name | read-only | current | Length restricted version of the media name 8. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.3 | Scalarmedia8-page-count | read-only | current | Number of sheets of media 8 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.4 | Scalarmedia8-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9 | Nodemedia9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.1 | Scalarmedia9-name | read-only | current | Media 9 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.2 | Scalarmedia9-short-name | read-only | current | Length restricted version of the media name 9. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.3 | Scalarmedia9-page-count | read-only | current | Number of sheets of media 9 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.4 | Scalarmedia9-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10 | Nodemedia10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.1 | Scalarmedia10-name | read-only | current | Media 10 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.2 | Scalarmedia10-short-name | read-only | current | Length restricted version of the media name 10. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.3 | Scalarmedia10-page-count | read-only | current | Number of sheets of media 10 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.4 | Scalarmedia10-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11 | Nodemedia11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.1 | Scalarmedia11-name | read-only | current | Media 11 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.2 | Scalarmedia11-short-name | read-only | current | Length restricted version of the media name 11. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.3 | Scalarmedia11-page-count | read-only | current | Number of sheets of media 11 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.4 | Scalarmedia11-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12 | Nodemedia12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.1 | Scalarmedia12-name | read-only | current | Media 12 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.2 | Scalarmedia12-short-name | read-only | current | Length restricted version of the media name 12. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.3 | Scalarmedia12-page-count | read-only | current | Number of sheets of media 12 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.4 | Scalarmedia12-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13 | Nodemedia13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.1 | Scalarmedia13-name | read-write | current | Media 13 name. Additional information: The maximum supported string length is 24 bytes. If the user entered string is too long, the device will store the first… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.2 | Scalarmedia13-short-name | read-write | current | Length restricted version of the media name 13. See MEDIA1-SHORT-NAME for details. Additional information: The maximum supported string length is 9 characters.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.3 | Scalarmedia13-page-count | read-only | current | Number of sheets of media 13 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.4 | Scalarmedia13-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14 | Nodemedia14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.1 | Scalarmedia14-name | read-write | current | Media 14 name. Additional information: See MEDIA13-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.2 | Scalarmedia14-short-name | read-write | current | Length restricted version of the media name 14. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA13-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.3 | Scalarmedia14-page-count | read-only | current | Number of sheets of media 14 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA13-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.4 | Scalarmedia14-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15 | Nodemedia15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.1 | Scalarmedia15-name | read-write | current | Media 15 name. Additional information: See MEDIA13-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.2 | Scalarmedia15-short-name | read-write | current | Length restricted version of the media name 15. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA13-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.3 | Scalarmedia15-page-count | read-only | current | Number of sheets of media 15 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA13-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.4 | Scalarmedia15-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16 | Nodemedia16 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.1 | Scalarmedia16-name | read-write | current | Media 16 name. Additional information: See MEDIA13-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.2 | Scalarmedia16-short-name | read-write | current | Length restricted version of the media name 16. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA13-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.3 | Scalarmedia16-page-count | read-only | current | Number of sheets of media 16 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA13-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.4 | Scalarmedia16-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17 | Nodemedia17 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.1 | Scalarmedia17-name | read-write | current | Media 17 name. Additional information: See MEDIA13-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.2 | Scalarmedia17-short-name | read-write | current | Length restricted version of the media name 17. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA13-SHORT-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.3 | Scalarmedia17-page-count | read-only | current | Number of sheets of media 17 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA13-PAGE-COUNT. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.4 | Scalarmedia17-engine-media-mode | read-write | current | The engine processing characteristics that are to be applied to this media. The processing characteristics are device specific. Additional information: See the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18 | Nodemedia18 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19 | Nodemedia19 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.20 | Nodemedia20 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.21 | Nodemedia21 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.22 | Nodemedia22 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.23 | Nodemedia23 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.24 | Nodemedia24 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.25 | Nodemedia25 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.26 | Nodemedia26 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.27 | Nodemedia27 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.28 | Nodemedia28 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.29 | Nodemedia29 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.30 | Nodemedia30 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.31 | Nodemedia31 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.32 | Nodemedia32 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.33 | Nodemedia33 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.34 | Nodemedia34 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.35 | Nodemedia35 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.36 | Nodemedia36 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.37 | Nodemedia37 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.38 | Nodemedia38 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.4 | Nodemedia-modes | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.4.1 | Scalarengine-media-modes-supported1 | read-only | current | The list of engine media modes supported by the device. The modes are each separated by a comma character. An example string would be: 'Normal,Rough,Low,Vellum… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5 | Nodemedia-size | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.1 | Scalarmedia-size-count | read-only | current | The number of impressions printed on sheets of this media size. The device POS should state whether this value is lost across a power cycle or is kept in perma… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.2 | Scalarmedia-size-west-edge-first-side-offset | read-write | current | Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). The adjustment is for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.5.3 | Scalarmedia-size-west-edge-second-side-offset | read-write | current | Returns or sets the number of 300 dpi dots by which the image is shifted relative to the west edge of the medium (see NORTH-EDGE-OFFSET). The adjustment is for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6 | Nodemedia-mode-details | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6.1 | Nodemedia-mode1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6.1.2 | Scalarengine-media-mode1-page-count | read-only | current | The number of sheets printed using this media mode. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6.2 | Nodemedia-mode2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6.2.2 | Scalarengine-media-mode2-page-count | read-only | current | The number of sheets printed using this media mode. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6.3 | Nodemedia-mode3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6.3.2 | Scalarengine-media-mode3-page-count | read-only | current | The number of sheets printed using this media mode. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6.4 | Nodemedia-mode4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6.4.2 | Scalarengine-media-mode4-page-count | read-only | current | The number of sheets printed using this media mode. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6.5 | Nodemedia-mode5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.6.5.2 | Scalarengine-media-mode5-page-count | read-only | current | The number of sheets printed using this media mode. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.7 | Nodemedia-counts | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.8 | Nodemedia-types | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.8.1 | Scalarmedia-number-of-type-supported | read-only | current | Indicates the maximum number of supported media types |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10 | Nodeconsumables | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1 | Nodeconsumables-1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1 | Nodeconsumable-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5 | Nodeconsumables-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1 | Nodeconsumables-life | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.1 | Scalarconsumable-life-usage-units-remaining | read-only | current | This object reports the current estimate of the number of usage units that remain before this supply is depleted. An installed supply that cannot report such a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.2 | Scalarconsumable-life-usage-units | read-only | current | This object reports current usage units in use by the corresponding CONSUMABLE-LIFE-USAGE-UNITS-REMAINING object |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.3 | Scalarconsumable-life-low-threshold | read-write | current | This object is used to report and modify a threshold value indicating the point in the life of a consumable or supply at which a transition to a LOW state will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.4 | Scalarestimated-page-yield | read-only | current | Returns the estimated yield of the cartridge in ESTIMATED-PAGE-YIELD-UNIT units |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.5 | Scalarestimated-page-yield-unit | read-only | current | Returns the unit used for ESTIMATED-PAGE-YIELD |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.1.6 | Scalarsupplies-at-very-low-delay-limit | read-write | current | This object is used to report and modify a very low delay limit value indicating the number of pages to delay the transition to a very low state for a supply. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.5.2 | Scalarsupplies-at-very-low-delay | read-write | current | Indicates if the transition to a VERY LOW state should be delayed by the number of pages specified in SUPPLIES-AT-VERY-LOW-DELAY-LIMIT |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.7 | Scalarconsumable-current-state | read-only | current | This PML object returns the current state of the particular consumable. \\ cAuthLevel1 - Consumable is at Authentication Level 1 \\ cAuthLevel2 - Consumable is… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.8 | Nodeconsumable-string | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.9 | Scalardevice-used-while-cartridge-out-override-active | read-only | current | Returns eUsed if the device has ever been used while Cartridge Out Override is activated. Merely enabling cartridge out override will not cause eUsed to be ret… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.11 | Scalarconsumable-pages-printed-with-supply | read-only | current | This PML object returns the number of pages printed with a cartridge consumable. This PML object returns the value that should be displayed under 'Pages Printe… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.15 | Scalartotal-kilo-pixels-per-cartridge | read-only | current | Returns the total number of kilo-pixels at 600dpi in the cartridge. That is, the number returned by this object should be multiplied by 1000 to determine the t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.16 | Scalarconsumable-replacement-count | read-write | current | The total number of times a consumable has been replaced. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.18 | Scalarconsumable-pages-since-replacement | read-write | current | The total number of pages fed since the last replacement of the consumable. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.11 | Nodeprint-meter | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.11.1 | Nodeprinter-average | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.11.1.4 | Scalarprinter-average-marking-agent-units-per-gram | read-only | current | This object is used to read the marking agent units of measure per gram. This is typically a conversion factor for converting pixels of toner to grams. This pi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.11.1.5 | Scalarprinter-average-marking-agent-coverage-actual | read-only | current | This object is used to read the actual average marking agent coverage for a given color plane. It is a real number that represents percent coverage and will re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.13 | Nodemenus | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.15 | Nodemedia-sizes | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.15.1 | Scalarmedia-size-supported-driver-n-string | read-only | current | Returns the Driver (PJL) string used to specigy a media size, for each media size that is supported by a product. PML walk of 1.4.1.15.1 will return the driver… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.2 | Nodefax-send | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.2.1 | Nodesettings-fax-send | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.2.1.1 | Scalarfax-resolution | read-write | current | struct { unsigned_32bit x_res; /* 1st four bytes; big endian */ unsigned_32bit y_res; /* 2nd four bytes; big endian */ } Sets the send fax resolution. The x an… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.2.1.2 | Scalarfax-contrast | read-write | current | Behaves as SCL's 'Set Scanner Contrast Level' command which is used for setting the sending fax contrast level. Range is 0..100. Additional information: Behave… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.2.1.3 | Scalarfax-pixel-data-type | read-write | current | Sets the scanning method used when sending a fax. eBiLevelThesholded - One bit per pixel, using simple thresholding of greyscale scan data. eBiLevelHalfToned -… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.2.2 | Nodestatus-fax-send | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.2.2.1 | Scalarnot-ready-fax-send | read-only | current | Indicates if the sending fax sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the sending fax sub-sy… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.2.5 | Nodetransmit-fax | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.2.5.3 | Scalarfax-allow-redials | read-write | current | When eTrue, the FAX machine can redial a phone number if the prior call failed for some reason. When eFalse, such redialing will not occur. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6 | Nodechannel | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.1 | Scalarchannelnumberofchannels | read-write | current | An indication of how many print data channels the I/O card supports. Additional information: This object is used by the IIO card to tell the peripheral firmwar… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.2 | Scalarchannelprinteralert | read-only | current | Identifies the values of prtAlertIndex, prtAlertSeverityLevel, prtAlertGroup, prtAlertGroupIndex, prtAlertLocation, and prtAlertCode for the latest critical ev… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3 | NodechannelTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1 | NodechannelEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.2 | Scalarchanneltype | read-write | current | Identifies the type of MIO print data channel. Additional information: After telling the peripheral how many logical channels will be used, the IIO card tells … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.3 | Scalarchannelprotocolversion | read-write | current | The version of the protocol used on this MIO print data channel. Additional information: After telling the peripheral how many logical channels will be used, t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.4 | Scalarchannelstate | read-write | current | The state of this print data channel. The value determines whether control information and print data is allowed through this channel or not. Additional inform… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.5 | Scalarchannelifindex | read-write | current | The value of ifIndex which corresponds to this channel. Additional information: After telling the peripheral how many logical channels will be used, the IIO ca… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.6 | Scalarchannelstatus | read-write | current | Sub-unit status is reported in the entries of the principle table in the Group that represents the sub- unit. For sub-units that report a status, there is a st… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.6.3.1.7 | Scalarchannelinformation | read-write | current | Auxiliary information to allow a printing application to use the channel for data submission to the printer. An application capable of using a specific PrtChan… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7 | Nodetables | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2 | Nodechannel-table | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1 | Nodechannel-entry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.2 | Scalarchannel-bytes-sent | read-only | current | The low order 31 bits of the number of bytes sent from the printer to the host on this logical channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.3 | Scalarchannel-bytes-received | read-only | current | The low order 31 bits of the number of bytes received by the printer from the host on this logical channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.4 | Scalarchannel-io-errors | read-only | current | The low order 31 bits of the number of I/O errors which have occured on this logical channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.5 | Scalarchannel-jobs-received | read-only | current | The low order 31 bits of the number of print jobs which have been received on this logical channel. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.7.2.1.6 | Scalarchannel-mio | read-only | current | The number of the MIO card associated with this logical channel. If this logical channel is not associated with an MIO card a zero is returned. The value retur… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | Nodeprintmib | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5 | NodeprtGeneral | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1 | NodeprtGeneralTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1 | NodeprtGeneralEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.1 | Scalarprtgeneralconfigchanges | read-only | current | Counts configuration changes that change the capabilities of a printer, such as the addition/deletion of input/output bins, the addition/deletion of interprete… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.2 | Scalarprtgeneralcurrentlocalization | read-write | current | The value of the prtLocalizationIndex corresponding to the current language, country, and character set to be used for localized string values that are identif… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.3 | Scalarprtgeneralreset | read-write | current | Setting this value to `powerCycleReset', `resetToNVRAM', or `resetToFactoryDefaults' will result in the resetting of the printer. When read, this object will a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.4 | Scalarprtgeneralcurrentoperator | read-write | current | The name of the person who is responsible for operating this printer. It is suggested that this string include information that would enable other humans to re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.5 | Scalarprtgeneralserviceperson | read-write | current | The name of the person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.6 | Scalarprtinputdefaultindex | read-only | current | The value of prtInputIndex corresponding to the default input sub-unit: that is, this object selects the default source of input media. This value shall be -1 … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.7 | Scalarprtoutputdefaultindex | read-write | current | The value of prtOutputIndex corresponding to the default output sub-unit; that is, this object selects the default output destination. This value shall be -1 i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.8 | Scalarprtmarkerdefaultindex | read-only | current | The value of prtMarkerIndex corresponding to the default marker sub-unit; that is, this object selects the default marker. Refer to Standard Printer MIB for mo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.9 | Scalarprtmediapathdefaultindex | read-write | current | The value of prtMediaPathIndex corresponding to the default media path; that is, the selection of the default media path. Refer to Standard Printer MIB for mor… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.10 | Scalarprtconsolelocalization | read-write | current | The value of the prtLocalizationIndex corresponding to the language, country, and character set to be used for the console. This localization applies both to t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.11 | Scalarprtconsolenumberofdisplaylines | read-only | current | The number of lines on the printer's physical display. This value is 0 if there are no lines on the physical display or if there is no physical display Refer t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.12 | Scalarprtconsolenumberofdisplaychars | read-only | current | The number of characters per line displayed on the physical display. This value is 0 if there are no lines on the physical display or if there is no physical d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.13 | Scalarprtconsoledisable | read-write | current | If the object prtConsoleDisable has value 'operatorConsoleDisabled' then input is not accepted from the operator console. If the object prtConsoleDisable has t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.14 | Scalarprtgeneralstartuppage | read-only | current | Used to enable or disable printing a startup page. If enabled, a startup page will be printed shortly after power-up, when the device is ready. Typical startup… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.15 | Scalarprtgeneralbannerpage | read-only | current | Used to enable or disable printing banner pages at the beginning of jobs. This is a master switch which applies to all jobs, regardless of interpreter. Refer t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.16 | Scalarprtgeneralprintername | read-write | current | An administrator-specified name for this printer. Depending upon implementation of this printer, the value of this object may or may not be same as the value f… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.17 | Scalarprtgeneralserialnumber | read-only | current | A recorded serial number for this device that indexes some type device catalog or inventory. This value is usually set by the device manufacturer but the MIB s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.18 | Scalarprtalertcriticalevents | read-only | current | A running counter of the number of critical alert events that have been recorded in the alert table. The value of this object is RESET in the event of a power … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.1.1.19 | Scalarprtalertallevents | read-only | current | A running counter of the total number of alert event entries (critical and non-critical) that have been recorded in the alert table Refer to Standard Printer M… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.2 | NodeprtStorageRefTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.2.1 | NodeprtStorageRefEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.2.1.2 | Scalarprtstoragerefindex | read-only | current | The value of the hrDeviceIndex of the printer device that this storageEntry is associated with. Refer to Standard Printer MIB for more details. Additional info… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.3 | NodeprtDeviceRefTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.3.1 | NodeprtDeviceRefEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.5.3.1.2 | Scalarprtdevicerefindex | read-only | current | The value of the hrDeviceIndex of the printer device that this deviceEntry is associated with. Refer to Standard Printer MIB for more details. Additional infor… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6 | NodeprtCover | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1 | NodeprtCoverTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1 | NodeprtCoverEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1.2 | Scalarprtcoverdescription | read-only | current | The manufacturer provided cover sub-mechanism name in the localization specified by prtGeneralCurrentLocalization. Refer to Standard Printer MIB for more detai… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.6.1.1.3 | Scalarprtcoverstatus | read-only | current | The status of this cover sub-unit. Refer to Standard Printer MIB for more details. Additional information: Replaces PML NOT-READY-DOOR-OPEN. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7 | NodeprtLocalization | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1 | NodeprtLocalizationTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1 | NodeprtLocalizationEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.2 | Scalarprtlocalizationlanguage | read-only | current | A two character language code from ISO 639. Examples en, gb, ca, fr, de. Refer to Standard Printer MIB for more details. Additional information: The languages … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.3 | Scalarprtlocalizationcountry | read-only | current | A two character country code from ISO 3166, a blank string (two space characters) shall indicate that the country is not defined. Examples: US, FR, DE, ... Ref… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.7.1.1.4 | Scalarprtlocalizationcharacterset | read-only | current | The coded character set used for this localization. Refer to Standard Printer MIB for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8 | NodeprtInput | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2 | NodeprtInputTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1 | NodeprtInputEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2 | Scalarprtinputtype | read-only | current | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 | Scalarprtinputdimunit | read-only | current | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. Refer to Standard Printer MIB for more details. Additional… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4 | Scalarprtinputmediadimfeeddirdeclared | read-write | current | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. Th… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | Scalarprtinputmediadimxfeeddirdeclared | read-write | current | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-un… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6 | Scalarprtinputmediadimfeeddirchosen | read-only | current | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | Scalarprtinputmediadimxfeeddirchosen | read-only | current | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 | Scalarprtinputcapacityunit | read-only | current | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Refer to Standard Printer MIB for more details. Additional… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 | Scalarprtinputmaxcapacity | read-only | current | The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10 | Scalarprtinputcurrentlevel | read-only | current | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the valu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 | Scalarprtinputstatus | read-only | current | The current status of this input sub-unit. Refer to Standard Printer MIB for more details. Additional information: Replaces PML STATUS-TRAY-MISSING and STATUS-… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 | Scalarprtinputmedianame | read-write | current | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This description is not processed by… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 | Scalarprtinputname | read-only | current | The name assigned to this input sub-unit. Refer to Standard Printer MIB for more details. Additional information: Replaces PML TRAYn-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 | Scalarprtinputvendorname | read-only | current | The vendor name of this input sub-unit. Refer to Standard Printer MIB for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 | Scalarprtinputmodel | read-only | current | The model name of this input sub-unit. Refer to Standard Printer MIB for more details. Additional information: LaserJet 4000 Series does not specify a model na… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 | Scalarprtinputversion | read-only | current | The version of this input sub-unit. Refer to Standard Printer MIB for more details. Additional information: LaserJet 4000 Series does not specify a version num… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 | Scalarprtinputserialnumber | read-only | current | The serial number assigned to this input sub-unit. Refer to Standard Printer MIB for more details. Additional information: LaserJet 4000 Series does not specif… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 | Scalarprtinputdescription | read-only | current | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. Refer to Standard Printer MIB for more deta… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 | Scalarprtinputsecurity | read-only | current | Indicates if this input sub-unit has some security associated with it. Refer to Standard Printer MIB for more details. Additional information: No security mech… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24 | Scalarprtinputmedialoadtimeout | read-only | current | When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer will wait for the duration (in s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.26 | Scalarprtinputnextindex | read-only | current | The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeout specified by prtInputMediaL… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9 | NodeprtOutput | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2 | NodeprtOutputTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1 | NodeprtOutputEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.2 | Scalarprtoutputtype | read-only | current | The type of technology supported by this output sub-unit. Refer to Standard Printer MIB for more details. Additional information: LaserJet 4000 Series has two … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.3 | Scalarprtoutputcapacityunit | read-only | current | The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. Refer to Standard Printer MIB for more details. Additiona… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4 | Scalarprtoutputmaxcapacity | read-only | current | The maximum capacity of this output sub-unit in output sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.5 | Scalarprtoutputremainingcapacity | read-only | current | The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (PrtCapacityUnitTC) of this output sub-unit. If this output s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.6 | Scalarprtoutputstatus | read-only | current | The current status of this output sub-unit. Refer to Standard Printer MIB for more details. Additional information: Replaces PML NOT-READY-OUTBIN-MISSING and S… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.7 | Scalarprtoutputname | read-only | current | The name assigned to this output sub-unit. Refer to Standard Printer MIB for more details. Additional information: Replaces PML OUTBINn-NAME. The characters mu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.8 | Scalarprtoutputvendorname | read-only | current | The vendor name of this output sub-unit. Refer to Standard Printer MIB for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.9 | Scalarprtoutputmodel | read-only | current | The name assigned to this output sub-unit. Refer to Standard Printer MIB for more details. Additional information: LaserJet 4000 Series does not support a mode… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.10 | Scalarprtoutputversion | read-only | current | The version of this output sub-unit. Refer to Standard Printer MIB for more details. Additional information: Returns device-specific information about the conf… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.11 | Scalarprtoutputserialnumber | read-only | current | The serial number assigned to this output sub-unit. Refer to Standard Printer MIB for more details. Additional information: LaserJet 4000 Series does not suppo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.12 | Scalarprtoutputdescription | read-only | current | A free-form text description of this output sub-unit in the localization specified by prtGeneralCurrentLocalization. Refer to Standard Printer MIB for more det… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.13 | Scalarprtoutputsecurity | read-only | current | Indicates if this output sub-unit has some security associated with it and if that security is enabled or not. Refer to Standard Printer MIB for more details. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.14 | Scalarprtoutputdimunit | read-only | current | The unit of measurement for use in calculating and relaying dimensional values for this output sub-unit. Refer to Standard Printer MIB for more details. Additi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.15 | Scalarprtoutputmaxdimfeeddir | read-only | current | The maximum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.16 | Scalarprtoutputmaxdimxfeeddir | read-only | current | The maximum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.17 | Scalarprtoutputmindimfeeddir | read-only | current | The minimum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18 | Scalarprtoutputmindimxfeeddir | read-only | current | The minimum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.19 | Scalarprtoutputstackingorder | read-only | current | The current state of the stacking order for the associated output sub-unit. `FirstToLast' means that as pages are output the front of the next page is placed a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.20 | Scalarprtoutputpagedeliveryorientation | read-only | current | The reading surface that will be `up' when pages are delivered to the associated output sub-unit. Values are faceUp and faceDown. (Note: interpretation of thes… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.21 | Scalarprtoutputbursting | read-only | current | This object indicates that the outputting sub-unit supports bursting, and if so, whether the feature is enabled. Bursting is the process by which continuous me… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.22 | Scalarprtoutputdecollating | read-only | current | This object indicates that the output supports supports decollating, and if so, whether the feature is enabled. Decollating is the process by which the individ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.23 | Scalarprtoutputpagecollated | read-only | current | This object indicates that the output sub-unit supports page collation, and if so, whether the feature is enabled. See glossary for definition of how this docu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.24 | Scalarprtoutputoffsetstacking | read-only | current | This object indicates that the output supports supports offset stacking, and if so, whether the feature is enabled. See glossary for how Offset Stacking is def… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10 | NodeprtMarker | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2 | NodeprtMarkerTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1 | NodeprtMarkerEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.2 | Scalarprtmarkermarktech | read-only | current | The type of marking technology used for this marking sub-unit. Refer to Standard Printer MIB for more details. Additional information: ePelectrophotographicLas… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.3 | Scalarprtmarkercounterunit | read-only | current | The unit that will be used by the printer when reporting counter values for this marking sub-unit. The time units of measure are provided for a device like a s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.4 | Scalarprtmarkerlifecount | read-only | current | The count of the number of units of measure counted during the life of printer using units of measure as specified by prtMarkerCounterUnit. Refer to Standard P… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.5 | Scalarprtmarkerpoweroncount | read-only | current | The count of the number of units of measure counted since the equipment was most recently powered on using units of measure as specified by prtMarkerCounterUni… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.6 | Scalarprtmarkerprocesscolorants | read-only | current | The number of process colors supported by this marker. A process color of 1 implies monochrome. The value of this object and prtMarkerSpotColorants cannot both… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.7 | Scalarprtmarkerspotcolorants | read-only | current | The number of spot colors supported by this marker. The value of this object and prtMarkerProcessColorants cannot both be 0. Must be 0 or greater. Refer to Sta… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.8 | Scalarprtmarkeraddressabilityunit | read-only | current | The unit of measure of distances, as applied to the marker's resolution. Refer to Standard Printer MIB for more details. Additional information: This will alwa… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.9 | Scalarprtmarkeraddressabilityfeeddir | read-only | current | The maximum number of addressable marking positions in the feed direction per 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of (-1) … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.10 | Scalarprtmarkeraddressabilityxfeeddir | read-only | current | The maximum number of addressable marking positions in the cross feed direction in 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.11 | Scalarprtmarkernorthmargin | read-only | current | The margin, in units identified by prtMarkerAddressabilityUnit, from the leading edge of the medium as the medium flows through the marking engine with the sid… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.12 | Scalarprtmarkersouthmargin | read-only | current | The margin from the South edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.13 | Scalarprtmarkerwestmargin | read-only | current | The margin from the West edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.14 | Scalarprtmarkereastmargin | read-only | current | The margin from the East edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.10.2.1.15 | Scalarprtmarkerstatus | read-only | current | The current status of this marker sub-unit. Refer to Standard Printer MIB for more details. Additional information: Replaces PML NOT-READY-DESTINATION-PRINT-EN… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11 | NodeprtMarkerSupplies | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1 | NodeprtMarkerSuppliesTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1 | NodeprtMarkerSuppliesEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.2 | Scalarprtmarkersuppliesmarkerindex | read-only | current | The value of prtMarkerIndex corresponding to the marking sub-unit with which this marker supply sub-unit is associated. Refer to Standard Printer MIB for more … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.3 | Scalarprtmarkersuppliescolorantindex | read-only | current | The value of prtMarkerColorantIndex corresponding to the colorant with which this marker supply sub-unit is associated. This value shall be 0 if there is no co… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.4 | Scalarprtmarkersuppliesclass | read-only | current | Indicates whether this supply entity represents a supply that is consumed or a receptacle that is filled. Refer to Standard Printer MIB for more details. Addit… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.5 | Scalarprtmarkersuppliestype | read-only | current | The type of this supply. Refer to Standard Printer MIB for more details. Additional information: ePtoner is the only value that applies for the LaserJet 4050 S… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.6 | Scalarprtmarkersuppliesdescription | read-only | current | The description of this supply container/receptacle in the localization specified by prtGeneralCurrentLocalization. Refer to Standard Printer MIB for more deta… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.7 | Scalarprtmarkersuppliessupplyunit | read-only | current | Unit of measure of this marker supply container/receptacle. Refer to Standard Printer MIB for more details. Additional information: ePtenthsOfGrams will always… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.8 | Scalarprtmarkersuppliesmaxcapacity | read-only | current | The maximum capacity of this supply container/receptacle expressed in prtMarkerSuppliesSupplyUnit. If this supply container/receptacle can reliably sense this … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.11.1.1.9 | Scalarprtmarkersupplieslevel | read-only | current | The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense thi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12 | NodeprtMarkerColorant | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1 | NodeprtMarkerColorantTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1.1 | NodeprtMarkerColorantEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1.1.2 | Scalarprtmarkercolorantmarkerindex | read-only | current | The value of prtMarkerIndex corresponding to the marker sub-unit with which this colorant entry is associated. Additional information: LaserJet 4500 only has o… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1.1.3 | Scalarprtmarkercolorantrole | read-only | current | The role played by this colorant. Additional information: All LaserJet 4500 colorants are process colorants. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1.1.4 | Scalarprtmarkercolorantvalue | read-only | current | The name of the color of this colorant using standardized string names from ISO 10175 (DPA) and ISO 10180 (SPDL) which are: other unknown white red green blue … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.12.1.1.5 | Scalarprtmarkercoloranttonality | read-only | current | The distinct levels of tonality realizable by a marking sub-unit when using this colorant. This value does not include the number of levels of tonal difference… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13 | NodeprtMediaPath | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4 | NodeprtMediaPathTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1 | NodeprtMediaPathEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.2 | Scalarprtmediapathmaxspeedprintunit | read-only | current | The unit of measure used in specifying the speed of all media paths in the printer. Refer to Standard Printer MIB for more details. Additional information: ePi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.3 | Scalarprtmediapathmediasizeunit | read-only | current | The units of measure of media size for use in calculating and relaying dimensional values for all media paths in the printer. Refer to Standard Printer MIB for… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.4 | Scalarprtmediapathmaxspeed | read-only | current | The maximum printing speed of this media path expressed in prtMediaPathMaxSpeedUnit's. A value of (-1) implies 'other'. Refer to Standard Printer MIB for more … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.5 | Scalarprtmediapathmaxmediafeeddir | read-only | current | The maximum physical media size in the feed direction of this media path expressed in units of measure specified by PrtMediaPathMediaSizeUnit. A value of (-1) … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.6 | Scalarprtmediapathmaxmediaxfeeddir | read-only | current | The maximum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.7 | Scalarprtmediapathminmediafeeddir | read-only | current | The minimum physical media size in the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.8 | Scalarprtmediapathminmediaxfeeddir | read-only | current | The minimum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.9 | Scalarprtmediapathtype | read-only | current | The type of the media path for this media path. Refer to Standard Printer MIB for more details. Additional information: Replaces PML DUPLEX-INSTALLED. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.10 | Scalarprtmediapathdescription | read-only | current | The manufacturer-provided description of this media path in the localization specified by prtGeneralCurrentLocalization. Refer to Standard Printer MIB for more… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.13.4.1.11 | Scalarprtmediapathstatus | read-only | current | The current status of this media path. Refer to Standard Printer MIB for more details. Additional information: The default values assume the printer is idle. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14 | NodeprtChannel | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1 | NodeprtChannelTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1 | NodeprtChannelEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.2 | Scalarprtchanneltype | read-only | current | The type of this print data channel. This object provides the linkage to ChannelType-specific groups that may (conceptually) extend the prtChannelTable with ad… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.3 | Scalarprtchannelprotocolversion | read-only | current | The version of the protocol used on this channel. The format used for version numbering depends on prtChannelType. Refer to Standard Printer MIB for more detai… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.4 | Scalarprtchannelcurrentjobcntllangindex | read-only | current | The value of prtInterpreterIndex corresponding to the Control Language Interpreter for this channel. This interpreter defines the syntax used for control funct… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.5 | Scalarprtchanneldefaultpagedesclangindex | read-write | current | The value of prtInterpreterIndex corresponding to the Page Description Language Interpreter for this channel. This interpreter defines the default Page Descrip… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.6 | Scalarprtchannelstate | read-only | current | The state of this print data channel. The value determines whether control information and print data is allowed through this channel or not. Refer to Standard… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.7 | Scalarprtchannelifindex | read-only | current | The value of ifIndex (in the ifTable; see the interface section of MIB-2/RFC 1213) which corresponds to this channel. When more than one row of the ifTable is … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.8 | Scalarprtchannelstatus | read-only | current | The current status of the channel. Refer to Standard Printer MIB for more details. Additional information: IIO-based channels provide their own values for this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.14.1.1.9 | Scalarprtchannelinformation | read-only | current | Auxiliary information to allow a printing application to use the channel for data submission to the printer. An application capable of using a specific PrtChan… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15 | NodeprtInterpreter | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1 | NodeprtInterpreterTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1 | NodeprtInterpreterEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.2 | Scalarprtinterpreterlangfamily | read-only | current | The family name of a Page Description Language (PDL) or control language which this interpreter in the printer can interpret or emulate. Refer to Standard Prin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.3 | Scalarprtinterpreterlanglevel | read-only | current | The level of the language which this interpreter is interpreting or emulating. This might contain a value like '5e' for an interpreter which is emulating level… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.4 | Scalarprtinterpreterlangversion | read-only | current | The date code or version of the language which this interpreter is interpreting or emulating. Refer to Standard Printer MIB for more details. Additional inform… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.5 | Scalarprtinterpreterdescription | read-only | current | A string to identify this interpreter in the localization specified by prtGeneralCurrentLocalization as opposed to the language which is being interpreted. It … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.6 | Scalarprtinterpreterversion | read-only | current | The date code, version number, or other product specific information tied to this interpreter. This value is associated with the interpreter, rather than with … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.7 | Scalarprtinterpreterdefaultorientation | read-write | current | The current orientation default for this interpreter. This value may be overridden for a particular job (e.g., by a command in the input data stream). Refer to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.8 | Scalarprtinterpreterfeedaddressability | read-only | current | The maximum interpreter addressability in the feed direction in 10000 prtMarkerAddressabilityUnits (see prtMarkerAddressabilityFeedDir ) for this interpreter. … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.9 | Scalarprtinterpreterxfeedaddressability | read-only | current | The maximum interpreter addressability in the cross feed direction in 10000 prtMarkerAddressabilityUnits (see prtMarkerAddressabilityXFeedDir) for this interpr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.10 | Scalarprtinterpreterdefaultcharsetin | read-write | current | The default coded character set for input octets encountered outside a context in which the Page Description Language established the interpretation of the oct… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.11 | Scalarprtinterpreterdefaultcharsetout | read-only | current | The default character set for data coming from this interpreter through the printer's output channel (i.e. the 'backchannel'). This value shall be (2) if there… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.15.1.1.12 | Scalarprtinterpretertwoway | read-only | current | Indicates whether or not this interpreter returns information back to the host. Refer to Standard Printer MIB for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16 | NodeprtConsoleDisplayBuffer | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5 | NodeprtConsoleDisplayBufferTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1 | NodeprtConsoleDisplayBufferEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1.2 | Scalarprtconsoledisplaybuffertext | read-only | current | The content of a line in the logical display buffer of the operator's console of the printer. When a write operation occurs, normally a critical message, to on… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17 | NodeprtConsoleLights | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6 | NodeprtConsoleLightTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1 | NodeprtConsoleLightEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.2 | Scalarprtconsoleontime | read-only | current | This object, in conjunction with prtConsoleOffTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the l… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.3 | Scalarprtconsoleofftime | read-only | current | This object, in conjunction with prtConsoleOnTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the la… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.4 | Scalarprtconsolecolor | read-only | current | The color of this light. Refer to Standard Printer MIB for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.17.6.1.5 | Scalarprtconsoledescription | read-only | current | The vendor description or label of this light in the localization specified by prtConsoleLocalization. Refer to Standard Printer MIB for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18 | NodeprtAlert | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1 | NodeprtAlertTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1 | NodeprtAlertEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.2 | Scalarprtalertseveritylevel | read-only | current | The level of severity of this alert table entry. The printer determines the severity level assigned to each entry into the table. Refer to Standard Printer MIB… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.3 | Scalarprtalerttraininglevel | read-only | current | See textual convention PrtAlertTrainingLevelTC Refer to Standard Printer MIB for more details. Additional information: The value of this object depends on the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.4 | Scalarprtalertgroup | read-only | current | The type of sub-unit within the printer model that this alert is related. Input, output, and markers are examples of printer model groups, i.e., examples of ty… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.5 | Scalarprtalertgroupindex | read-only | current | An index of the row within the principle table in the group identified by prtAlertGroup that represents the sub-unit of the printer that caused this alert. The… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.6 | Scalarprtalertlocation | read-only | current | The sub-unit location that is defined by the printer manufacturer to further refine the location of this alert within the designated sub-unit. The location is … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.7 | Scalarprtalertcode | read-only | current | See associated textual convention PrtAlertCodeTC Refer to Standard Printer MIB for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.8 | Scalarprtalertdescription | read-only | current | A description of this alert entry in the localization specified by prtGeneralCurrentLocalization. The description is provided by the printer to further elabora… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.18.1.1.9 | Scalarprtalerttime | read-only | current | The value of sysUpTime at the time that this alert was generated. Refer to Standard Printer MIB for more details. |
| 1.3.6.1.4.1.11.2.3.9.4.2.3 | Nodehrm | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2 | NodehrStorage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.2 | Scalarhrmemorysize | read-only | current | The amount of physical main memory contained by the host. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The unit of measure … |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3 | NodehrStorageTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1 | NodehrStorageEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.1 | Scalarhrstorageindex | read-only | current | A unique value for each logical storage area contained by the host. Refer to RFC 1514, Host Resources MIB, for more details. Additional information (mass stora… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.2 | Scalarhrstoragetype | read-only | current | The type of storage represented by this entry. Refer to RFC 1514, Host Resources MIB, for more details. Additional information (mass storage): Constant. Return… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.3 | Scalarhrstoragedescr | read-only | current | A description of the type and instance of the storage described by this entry. Refer to RFC 1514, Host Resources MIB, for more details. Additional information … |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.4 | Scalarhrstorageallocationunits | read-only | current | The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.5 | Scalarhrstoragesize | read-only | current | The size of the storage represented by this entry, in units of hrStorageAllocationUnits. Refer to RFC 1514, Host Resources MIB, for more details. Additional in… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.6 | Scalarhrstorageused | read-only | current | The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits. Refer to RFC 1514, Host Resources MIB, for more de… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.2.3.1.7 | Scalarhrstorageallocationfailures | read-only | current | The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a … |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3 | NodehrDevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2 | NodehrDeviceTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1 | NodehrDeviceEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.1 | Scalarhrdeviceindex | read-only | current | A unique value for each device contained by the host. The value for each device must remain constant at least from one re-initialization of the agent to the ne… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.2 | Scalarhrdevicetype | read-only | current | An indication of the type of device. If this value is `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable which corresponds to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.3 | Scalarhrdevicedescr | read-only | current | A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. Refer to RFC 1514, Host Resources MI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.4 | Scalarhrdeviceid | read-only | current | The product ID for this device. Refer to RFC 1514, Host Resources MIB, for more details. Additional information (printer) : The complete OID reported by this o… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.5 | Scalarhrdevicestatus | read-only | current | The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. r… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.2.1.6 | Scalarhrdeviceerrors | read-only | current | The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. Ho… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5 | NodehrPrinterTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1 | NodehrPrinterEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.1 | Scalarhrprinterstatus | read-only | current | The current status of this printer device. When in the idle(1), printing(2), or warmup(3) state, the corresponding hrDeviceStatus should be running(2) or warni… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.5.1.2 | Scalarhrprinterdetectederrorstate | read-only | current | This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definition… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.6 | NodehrDiskStorageTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.6.1 | NodehrDiskStorageEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.6.1.1 | Scalarhrdiskstorageaccess | read-write | current | An indication if this long-term storage device is readable and writable or only readable. This should reflect the media type, any write-protect mechanism, and … |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.6.1.2 | Scalarhrdiskstoragemedia | read-only | current | An indication of the type of media used in this long-term storage device. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Cons… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.6.1.3 | Scalarhrdiskstorageremoveble | read-only | current | Denotes whether or not the disk media may be removed from the drive. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Constant.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.6.1.4 | Scalarhrdiskstoragecapacity | read-only | current | The total size for this long-term storage device. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The capacity is in Kbytes. R… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.7 | NodehrPartitionTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.7.1 | NodehrPartitionEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.7.1.1 | Scalarhrpartitionindex | read-only | current | A unique value for each partition on this long- term storage device. The value for each long-term storage device must remain constant at least from one re-init… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.7.1.2 | Scalarhrpartitionlabel | read-write | current | A textual description of this partition. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The MS-DOS volume label. The volume l… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.7.1.3 | Scalarhrpartitionid | read-only | current | A descriptor which uniquely represents this partition to the responsible operating system. On some systems, this might take on a binary representation. Refer t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.7.1.4 | Scalarhrpartitionsize | read-only | current | The size of this partition. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The capacity is in Kbytes. Returns the same value … |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.7.1.5 | Scalarhrpartitionfsindex | read-only | current | The index of the file system mounted on this partition. If no file system is mounted on this partition, then this value shall be zero. Note that multiple parti… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8 | NodehrFSTable | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8.1 | NodehrFSEntry | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8.1.1 | Scalarhrfsindex | read-only | current | A unique value for each file system local to this host. The value for each file system must remain constant at least from one re-initialization of the agent to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8.1.2 | Scalarhrfsmountpoint | read-only | current | The path name of the root of this file system. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Constant. Returns <noSuchName> … |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8.1.3 | Scalarhrfsremotemountpoint | read-only | current | A description of the name and/or address of the server that this file system is mounted from. This may also include parameters such as the mount point on the r… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8.1.4 | Scalarhrfstype | read-only | current | The value of this object identifies the type of this file system. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Constant. Re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8.1.5 | Scalarhrfsaccess | read-write | current | An indication if this file system is logically configured by the operating system to be readable and writable or only readable. This does not represent any loc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8.1.6 | Scalarhrfsbootable | read-only | current | A flag indicating whether this file system is bootable. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Constant. Returns <noS… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8.1.7 | Scalarhrfsstorageindex | read-only | current | The index of the hrStorageEntry that represents information about this file system. If there is no such information available, then this value shall be zero. T… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8.1.8 | Scalarhrfslastfullbackupdate | read-only | current | The last date at which this complete file system was copied to another storage device for backup. This information is useful for ensuring that backups are bein… |
| 1.3.6.1.4.1.11.2.3.9.4.2.3.3.8.1.9 | Scalarhrfslastpartialbackupdate | read-only | current | The last date at which a portion of this file system was copied to another storage device for backup. This information is useful for ensuring that backups are … |
| 1.3.6.1.5 | Nodesecurity | |||
| 1.3.6.1.5.1 | Nodesettings-security | |||
| 1.3.6.1.5.1.1 | Scalarsupports-pjl-user-groups | read-only | current | Returns eTrue if the device is able to process PJL user group variables. See the PJL Technical Reference for the proper syntax for setting these variables. Bec… |