HP-SN-AGENT-MIB
257 objects
No module-level DESCRIPTION found.
Imported Objects
| HP-SN-ROOT-MIB | snAgentSys snChassis snStack |
| IF-MIB | InterfaceIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress TimeTicks |
| SNMPv2-SMI | Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1 | NodesnChasGen | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.1 | ScalarsnChasType | read-only | mandatory | The chassis type represents the type of Foundry product being managed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.2 | ScalarsnChasSerNum | read-only | mandatory | The serial number of the chassis. If the serial number is unknown or unavailable then the value should be a zero length string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.3 | ScalarsnChasPwrSupplyStatus | read-only | mandatory | A bit array that contains the value of the Chassis Power Supplies. This is a packed bit string; the 2 power supplies status are encoded into 4 bits (a nibble).… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.4 | ScalarsnChasFanStatus | read-only | mandatory | A bit array that contains the value of the fan status. This is a packed bit string. The status of each fan is encoded into one bit. bit value meaning 0 fan fai… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.5 | ScalarsnChasMainBrdDescription | read-only | mandatory | The main board description string. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.6 | ScalarsnChasMainPortTotal | read-only | mandatory | The total number of ports for the main board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.7 | ScalarsnChasExpBrdDescription | read-only | mandatory | The expansion board description string. Expansion board are those boards attaching on the main board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.8 | ScalarsnChasExpPortTotal | read-only | mandatory | The total number of ports for the expansion board. (It is obsoleted for Chassis Product) |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.9 | ScalarsnChasStatusLeds | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.10 | ScalarsnChasTrafficLeds | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.11 | ScalarsnChasMediaLeds | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.12 | ScalarsnChasEnablePwrSupplyTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate power supply failure traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.13 | ScalarsnChasMainBrdId | read-only | mandatory | The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format ve… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.14 | ScalarsnChasExpBrdId | read-only | mandatory | The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.15 | ScalarsnChasSpeedLeds | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.16 | ScalarsnChasEnableFanTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate fan failure traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.17 | ScalarsnChasIdNumber | read-write | mandatory | An administratively-assigned chassis identity number, used by inventory control. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.18 | ScalarsnChasActualTemperature | read-only | mandatory | Temperature of the chassis. Each unit is 0.5 degrees Celcius. Only management module built with temperature sensor hardware is applicable. For those non-applic… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.19 | ScalarsnChasWarningTemperature | read-write | mandatory | Actual temperature higher than this threshold value will trigger the switch to send a temperature warning trap. Each unit is 0.5 degrees Celcius. Only manageme… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.20 | ScalarsnChasShutdownTemperature | read-write | mandatory | Actual temperature higher than this threshold value will shutdown a partial of the switch hardware to cool down the system. Each unit is 0.5 degrees Celcius. O… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.21 | ScalarsnChasEnableTempWarnTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate temperature warning traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.22 | ScalarsnChasFlashCard | read-only | mandatory | A bit array that contains the value of the flash card status. This is a packed bit string. The status of each flash card is encoded into one bit. bit value mea… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.23 | ScalarsnChasFlashCardLeds | read-only | mandatory | A bit array that contains the value of the flash card LEDs. This is a packed bit string; each LED is encoded into 1 bit for each flash card. bit value meaning … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.24 | ScalarsnChasNumSlots | read-only | mandatory | Number of slots of the chassis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.25 | ScalarsnChasArchitectureType | read-only | mandatory | Architecture type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.26 | ScalarsnChasProductType | read-only | mandatory | Product type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2 | NodesnChasPwr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1 | TablesnChasPwrSupplyTable | not-accessible | mandatory | A table of each power supply information. Only installed power supply appears in a table row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1 | RowsnChasPwrSupplyEntry | not-accessible | mandatory | A row in the power supply table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1.1 | ColumnsnChasPwrSupplyIndex | read-only | mandatory | The index to power supply table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1.2 | ColumnsnChasPwrSupplyDescription | read-only | mandatory | The power supply description string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1.3 | ColumnsnChasPwrSupplyOperStatus | read-only | mandatory | The power supply operation status. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3 | NodesnChasFan | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1 | TablesnChasFanTable | not-accessible | mandatory | A table of each fan information. Only installed fan appears in a table row. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1 | RowsnChasFanEntry | not-accessible | mandatory | A row in the fan table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1.1 | ColumnsnChasFanIndex | read-only | mandatory | The index to fan table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1.2 | ColumnsnChasFanDescription | read-only | mandatory | The fan description string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1.3 | ColumnsnChasFanOperStatus | read-only | mandatory | The fan operation status. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1 | NodesnAgentGbl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.1 | ScalarsnAgReload | read-write | mandatory | Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2)...agent running busy(4)......… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.2 | ScalarsnAgEraseNVRAM | read-write | mandatory | Action object to erase NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash erasing(4)...agent is era… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.3 | ScalarsnAgWriteNVRAM | read-write | mandatory | Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.4 | ScalarsnAgConfigFromNVRAM | not-accessible | mandatory | Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash configin… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.5 | ScalarsnAgTftpServerIp | read-write | mandatory | The tftp server address, this will be used for both download/upload image file and config file. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.6 | ScalarsnAgImgFname | read-write | mandatory | Name of the image file including path currently associated with the system. When the object is not used, the value is a zero length string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.7 | ScalarsnAgImgLoad | read-write | mandatory | Action object to down/up load a new image to the agent. The following values: Error values: from normal(1) to operationError(17) and tftpWrongFileType(23). loa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.8 | ScalarsnAgCfgFname | read-write | mandatory | Name of the config file(s) including path currently associated with the system. Some agents in special situations may support a value which contains multiple f… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.9 | ScalarsnAgCfgLoad | read-write | mandatory | Action object to down/up load a config image to the agent. The following values can be read : Error values: from normal(1) to operationError(17) and tftpWrongF… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.10 | ScalarsnAgDefGwayIp | read-write | mandatory | The default gateway (router) address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.11 | ScalarsnAgImgVer | read-only | mandatory | The version of the running software in the form 'major.minor.maintenance[letters]'. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.12 | ScalarsnAgFlashImgVer | read-only | mandatory | The version of the software image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not known or not available, th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.13 | ScalarsnAgGblIfIpAddr | read-write | mandatory | The interface ip address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.14 | ScalarsnAgGblIfIpMask | read-write | mandatory | The interface ip address mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.15 | ScalarsnAgGblPassword | read-write | mandatory | System Security Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.16 | ScalarsnAgTrpRcvrCurEntry | read-only | mandatory | The current total entries of the Trap Receiver Table are created. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.19 | ScalarsnAgGblDataRetrieveMode | read-write | mandatory | By default, this mode is set to nextbootCfg(0). The VLAN Table and Port-STP Table data will be retrieved according to this mode. nextbootCfg(0).........the nex… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.20 | ScalarsnAgSystemLog | read-write | mandatory | The system log object to indicate whether any Network Management Station(NMS) has login. The first byte of the octet string is the value decribed below and fol… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.21 | ScalarsnAgGblEnableColdStartTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate cold start traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.22 | ScalarsnAgGblEnableLinkUpTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate link up traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.23 | ScalarsnAgGblEnableLinkDownTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate link down traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.24 | ScalarsnAgGblPasswordChangeMode | read-only | mandatory | Specify which management entity is allowed to change the password. 'anyMgmtEntity' management entities are SNMP management station, console command line interf… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.25 | ScalarsnAgGblReadOnlyCommunity | read-write | mandatory | SNMP read community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.26 | ScalarsnAgGblReadWriteCommunity | read-write | mandatory | SNMP read-write community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.27 | ScalarsnAgGblCurrentSecurityLevel | read-only | mandatory | This represnts the current log-in security level. Each level of security requires a password to permit user for different system configurations. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.28 | ScalarsnAgGblSecurityLevelSet | read-write | mandatory | This shows which the security level password to be set. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.29 | ScalarsnAgGblLevelPasswordsMask | read-only | mandatory | This shows the bitmap of level passwords which successfully assigned to the system. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.30 | ScalarsnAgGblQueueOverflow | read-only | mandatory | false - The device queues are not overflow. true - The device queues are overflow. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.31 | ScalarsnAgGblBufferShortage | read-only | mandatory | false - The device buffers are adequate. true - The device buffers are in shortage. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.32 | ScalarsnAgGblDmaFailure | read-only | mandatory | false - The device DMAs are in good condition. true - One of the DMAs in the device fails. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.33 | ScalarsnAgGblResourceLowWarning | read-only | mandatory | false - No, the device does not have resource-low-warning. true - Yes, the device does have resource-low-warning. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.34 | ScalarsnAgGblExcessiveErrorWarning | read-only | mandatory | false - No, the device does not have any excessive collision, FCS errors, alignment warning etc. true - Yes, the device does have. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.35 | ScalarsnAgGblCpuUtilData | read-only | mandatory | The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilColle… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.36 | ScalarsnAgGblCpuUtilCollect | read-write | deprecated | enable(1) - The beginning of statistics collection of utilization of the CPU in the device. disable(0) - The end of statistics collection of utilization of the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.37 | ScalarsnAgGblTelnetTimeout | read-write | mandatory | Telnet session idling timeout value. Writing value 0 to this object never timeouts any telnet sessions. Each value unit is one minute. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.38 | ScalarsnAgGblEnableWebMgmt | read-write | mandatory | Enable/disable web management. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.39 | ScalarsnAgGblSecurityLevelBinding | read-only | mandatory | This represnts the binding of a given password to which security level. A value of 255 indicates an invalid binding. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.40 | ScalarsnAgGblEnableSLB | read-only | mandatory | Enable/disable Server Load Balancing. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.41 | ScalarsnAgSoftwareFeature | read-only | mandatory | A bit string representing the software feature of the running switch/router image. These features were conditional compiled to different product images. For ea… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.42 | ScalarsnAgGblEnableModuleInsertedTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate hardware module inserted to chassis traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.43 | ScalarsnAgGblEnableModuleRemovedTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate hardware module removed from chassis traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.44 | ScalarsnAgGblTrapMessage | read-only | mandatory | A generic trap message string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.45 | ScalarsnAgGblEnableTelnetServer | read-write | mandatory | Enable or disable telnet server in device. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.46 | ScalarsnAgGblTelnetPassword | read-write | mandatory | Telnet Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.47 | ScalarsnAgBuildDate | read-only | mandatory | The date of the built software. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.48 | ScalarsnAgBuildtime | read-only | mandatory | The time of the built software. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.49 | ScalarsnAgBuildVer | read-only | mandatory | The version of the built software in the form 'major.minor.maintenance[letters]'. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.50 | ScalarsnAgGblCpuUtil1SecAvg | read-only | mandatory | The statistics collection of 1 second CPU utilization. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.51 | ScalarsnAgGblCpuUtil5SecAvg | read-only | mandatory | The statistics collection of 5 second CPU utilization. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.52 | ScalarsnAgGblCpuUtil1MinAvg | read-only | mandatory | The statistics collection of 1 minute CPU utilization. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.53 | ScalarsnAgGblDynMemUtil | read-only | mandatory | The system dynamic memory utilization, in unit of percentage. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.54 | ScalarsnAgGblDynMemTotal | read-only | mandatory | The total amount of system dynamic memory, in number of bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.55 | ScalarsnAgGblDynMemFree | read-only | mandatory | The free amount of system dynamic memory, in number of bytes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.56 | ScalarsnAgImgLoadSPModuleType | read-write | mandatory | The switch processor module type of which that receives the downloaded image. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.57 | ScalarsnAgImgLoadSPModuleNumber | read-write | mandatory | The slot numner of a switch processor module that receives the downloaded image. Setting value 0 applies to all SP modules. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.58 | ScalarsnAgTrapHoldTime | read-write | mandatory | The time in seconds for which traps will be witheld during system initialization. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.59 | ScalarsnAgSFlowSourceInterface | read-write | mandatory | Use the ifIndex value here to specify the source interface to be used for sFlow packets. The interface should have IP address configured on it. Value of 0 indi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.60 | ScalarsnAgGblTelnetLoginTimeout | read-write | mandatory | Telnet session login timeout value in minutes. Default is 1 minute. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.61 | ScalarsnAgGblBannerExec | read-write | mandatory | EXEC process creation banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.62 | ScalarsnAgGblBannerIncoming | read-write | mandatory | Incoming terminal line banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.63 | ScalarsnAgGblBannerMotd | read-write | mandatory | Message-of-the-day banner. Insert newlines using '\n' within the string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2 | NodesnAgentBrd | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1 | TablesnAgentBrdTable | not-accessible | mandatory | A table of each physical board information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1 | RowsnAgentBrdEntry | not-accessible | mandatory | A row in the Agent Board table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.1 | ColumnsnAgentBrdIndex | read-only | mandatory | The index to the Agent Interface Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.2 | ColumnsnAgentBrdMainBrdDescription | read-only | mandatory | The main board description string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.3 | ColumnsnAgentBrdMainBrdId | read-only | mandatory | The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format ve… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.4 | ColumnsnAgentBrdMainPortTotal | read-only | mandatory | The total number of ports for the main board. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.5 | ColumnsnAgentBrdExpBrdDescription | read-only | mandatory | The expansion board description string. Expansion board are those boards attaching on the main board. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.6 | ColumnsnAgentBrdExpBrdId | read-only | mandatory | The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet string with the following meaning: octet 0… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.7 | ColumnsnAgentBrdExpPortTotal | read-only | mandatory | The total number of ports for the expansion board. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.8 | ColumnsnAgentBrdStatusLeds | read-only | deprecated | A bit array that contains the value of the front panel status LEDs. This is a bit-map; each LED is encoded into 1 bit for each switch port. The maximum number … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.9 | ColumnsnAgentBrdTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel traffic LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maxi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.10 | ColumnsnAgentBrdMediaLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximu… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.11 | ColumnsnAgentBrdSpeedLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs. This is a packed bit string; each LED is encoded into 1 bit for each switch port. The maximu… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.12 | ColumnsnAgentBrdModuleStatus | read-only | mandatory | By default, this mode is set to notActivated(0). moduleEmpty(0) ......... The slot of the chassis is empty. moduleGoingDown(2) ..... The module is going down. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.13 | ColumnsnAgentBrdRedundantStatus | read-only | mandatory | The redundant status of a module. Non-management module always returns other(1). Management module returns the rest of the states. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.14 | ColumnsnAgentBrdAlarmLeds | read-only | deprecated | A bit array that contains the value of the front panel media LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit for each s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.15 | ColumnsnAgentBrdTxTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.16 | ColumnsnAgentBrdRxTrafficLeds | read-only | deprecated | A bit array that contains the value of the front panel receive traffic LEDs (for POS Module Only). This is a packed bit string; each LED is encoded into 1 bit … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.17 | ColumnsnAgentBrdStatusLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.18 | ColumnsnAgentBrdTrafficLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.19 | ColumnsnAgentBrdMediaLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.20 | ColumnsnAgentBrdSpeedLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.21 | ColumnsnAgentBrdAlarmLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.22 | ColumnsnAgentBrdTxTrafficLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.23 | ColumnsnAgentBrdRxTrafficLedString | read-only | mandatory | |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3 | NodesnAgentTrp | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1 | TablesnAgTrpRcvrTable | not-accessible | mandatory | A table of managers which to send traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1 | RowsnAgTrpRcvrEntry | not-accessible | mandatory | A row in the trap receiver table. The column snAgTrpRcvrStatus is used to create and delete rows in the table. Creation requires a SET PDU with objects snAgTrp… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.1 | ColumnsnAgTrpRcvrIndex | read-only | mandatory | The index to the Trap Receiver Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.2 | ColumnsnAgTrpRcvrIpAddr | read-write | mandatory | The ip address for SNMP manager that is to receive the trap. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.3 | ColumnsnAgTrpRcvrComm | read-write | mandatory | Community string to use. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.4 | ColumnsnAgTrpRcvrStatus | read-write | mandatory | This object is used to create and delete rows in the table and control if they are used. The values that can be written are: ignore(5)...don't use this entry t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.5 | ColumnsnAgTrpRcvrUDPPort | read-write | mandatory | UDP port number of the trap receiver. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4 | NodesnAgentBoot | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1 | TablesnAgBootSeqTable | not-accessible | mandatory | A table of image load sequnce instructions to the boot code. Boot code will start from instruction of the first valid entry to load the image. If failed, it wi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1 | RowsnAgBootSeqEntry | not-accessible | mandatory | A row in the boot sequence table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.1 | ColumnsnAgBootSeqIndex | read-only | mandatory | The index to the boot sequence table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.2 | ColumnsnAgBootSeqInstruction | read-write | mandatory | The instruction for the boot code. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.3 | ColumnsnAgBootSeqIpAddr | read-write | mandatory | The ip address of the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.4 | ColumnsnAgBootSeqFilename | read-write | mandatory | The image filename on the TFTP server if snAgBootSeqInstruction was set to 'fromTftpServer'; otherwise, this object is not used in any other boot instruction. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.5 | ColumnsnAgBootSeqRowStatus | read-write | mandatory | To create or delete a boot sequence table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5 | NodesnAgCfgEos | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1 | TablesnAgCfgEosTable | not-accessible | mandatory | This table represents the fragmented Configuration File data packet with checksum include in each rows of this table. A SNMP-SET represents configuration file … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1 | RowsnAgCfgEosEntry | not-accessible | mandatory | An EOS row in the table of encoded octet strings for table snAgCfgEosTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1.1 | ColumnsnAgCfgEosIndex | read-only | mandatory | Each VLAN EOS Buffer Identifier have a multiple VLAN table entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1.2 | ColumnsnAgCfgEosPacket | read-write | mandatory | An encoded octet string. On reads it contains an integral number of configuration file data packets. The size of each encoded octet string is less than or equa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1.3 | ColumnsnAgCfgEosChkSum | read-write | mandatory | A checksum of each configuration file data packet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6 | NodesnAgentLog | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1 | NodesnAgSysLogGbl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.1 | ScalarsnAgSysLogGblEnable | read-write | mandatory | Enable/disable system logging. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.2 | ScalarsnAgSysLogGblBufferSize | read-write | mandatory | The number of dynamic system logging entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.3 | ScalarsnAgSysLogGblClear | read-write | mandatory | Clear dynamic and/or static system logging buffers. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.4 | ScalarsnAgSysLogGblCriticalLevel | read-write | mandatory | Filter events going to the logging buffer. This is a packed bit string object of which each bit has the following meaning: (bit 0 is the least significant bit)… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.5 | ScalarsnAgSysLogGblLoggedCount | read-only | mandatory | The number events logged in the system logging buffer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.6 | ScalarsnAgSysLogGblDroppedCount | read-only | mandatory | The number of events dropped. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.7 | ScalarsnAgSysLogGblFlushedCount | read-only | mandatory | The number of times that the system logging buffer was cleared. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.8 | ScalarsnAgSysLogGblOverrunCount | read-only | mandatory | The number of times that the system logging buffer was wrapped around. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.9 | ScalarsnAgSysLogGblServer | read-write | deprecated | IP address of syslog server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.10 | ScalarsnAgSysLogGblFacility | read-write | mandatory | Facility code. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2 | TablesnAgSysLogBufferTable | not-accessible | mandatory | Dynamic system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1 | RowsnAgSysLogBufferEntry | not-accessible | mandatory | A row in the dynamic system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.1 | ColumnsnAgSysLogBufferIndex | read-only | mandatory | The index to the dynamic system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.2 | ColumnsnAgSysLogBufferTimeStamp | read-only | mandatory | A time stamp when the event is logged. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.3 | ColumnsnAgSysLogBufferCriticalLevel | read-only | mandatory | The critical level of this event. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.4 | ColumnsnAgSysLogBufferMessage | read-only | mandatory | The system logging message. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.5 | ColumnsnAgSysLogBufferCalTimeStamp | read-only | mandatory | A time stamp when the event is logged. This object returns a NULL terminated time stamp string if the system calendar time was set. It returns a zero length st… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3 | TablesnAgStaticSysLogBufferTable | not-accessible | mandatory | Static system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1 | RowsnAgStaticSysLogBufferEntry | not-accessible | mandatory | A row in the static system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.1 | ColumnsnAgStaticSysLogBufferIndex | read-only | mandatory | The index to the static system logging buffer table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.2 | ColumnsnAgStaticSysLogBufferTimeStamp | read-only | mandatory | A time stamp when the event is logged. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.3 | ColumnsnAgStaticSysLogBufferCriticalLevel | read-only | mandatory | The critical level of this event. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.4 | ColumnsnAgStaticSysLogBufferMessage | read-only | mandatory | The system logging message. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.5 | ColumnsnAgStaticSysLogBufferCalTimeStamp | read-only | mandatory | A time stamp when the event is logged. This object returns a NULL terminated time stamp string if the system calendar time was set. It returns a zero length st… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4 | TablesnAgSysLogServerTable | not-accessible | mandatory | System Log Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1 | RowsnAgSysLogServerEntry | not-accessible | mandatory | A row in the SysLog Server table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1.1 | ColumnsnAgSysLogServerIP | read-write | mandatory | IP address of syslog server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1.2 | ColumnsnAgSysLogServerUDPPort | read-write | mandatory | UDP port number of syslog server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1.3 | ColumnsnAgSysLogServerRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7 | NodesnAgentSysParaConfig | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1 | TablesnAgentSysParaConfigTable | not-accessible | mandatory | A table of Agent of each board. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1 | RowsnAgentSysParaConfigEntry | not-accessible | mandatory | A row in the Agent System Parameters Configuation table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.1 | ColumnsnAgentSysParaConfigIndex | read-only | mandatory | The index to the Agent System Parameters Configuation Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.2 | ColumnsnAgentSysParaConfigDescription | read-only | mandatory | The main board description string. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.3 | ColumnsnAgentSysParaConfigMin | read-only | mandatory | The minimum value of this Agent System Parameter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.4 | ColumnsnAgentSysParaConfigMax | read-only | mandatory | The maximum value of this Agent System Parameter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.5 | ColumnsnAgentSysParaConfigDefault | read-only | mandatory | The default value of this Agent System Parameter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.6 | ColumnsnAgentSysParaConfigCurrent | read-write | mandatory | The current configurated value of this Agent System Parameter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8 | NodesnAgentConfigModule | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1 | TablesnAgentConfigModuleTable | not-accessible | mandatory | A table of each configured module information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1 | RowsnAgentConfigModuleEntry | not-accessible | mandatory | A row in the Agent Configured Module table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.1 | ColumnsnAgentConfigModuleIndex | read-only | mandatory | The index to the Agent Configured Module Table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.2 | ColumnsnAgentConfigModuleType | read-write | mandatory | The Configured Module Type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.3 | ColumnsnAgentConfigModuleRowStatus | read-write | mandatory | To create or delete a configured module table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.4 | ColumnsnAgentConfigModuleDescription | read-only | mandatory | A description of the configured module. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.5 | ColumnsnAgentConfigModuleOperStatus | read-only | mandatory | Module operational status. Zero length string indicates that physical module has not been inserted to the chassis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.6 | ColumnsnAgentConfigModuleSerialNumber | read-only | mandatory | Module serial number. Zero length string indicates that module serial number EEPROM has not been programmed or the module does not support serial number EEPROM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.7 | ColumnsnAgentConfigModuleNumberOfPorts | read-only | mandatory | The number of ports of module. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.8 | ColumnsnAgentConfigModuleMgmtModuleType | read-only | mandatory | Management module type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.9 | ColumnsnAgentConfigModuleNumberOfCpus | read-only | mandatory | The number of module CPUs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9 | NodesnAgentUser | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.1 | NodesnAgentUserGbl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.1.1 | ScalarsnAgentUserMaxAccnt | read-only | mandatory | Maximum number of user account entries can be configured. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2 | TablesnAgentUserAccntTable | not-accessible | mandatory | A table of user account information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1 | RowsnAgentUserAccntEntry | not-accessible | mandatory | A row in the Agent User table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.1 | ColumnsnAgentUserAccntName | read-only | mandatory | The user name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.2 | ColumnsnAgentUserAccntPassword | read-write | mandatory | The user password. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.3 | ColumnsnAgentUserAccntEncryptCode | read-write | mandatory | The password encryption method code. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.4 | ColumnsnAgentUserAccntPrivilege | read-write | mandatory | The user privilege. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.5 | ColumnsnAgentUserAccntRowStatus | read-write | mandatory | To create or delete a user account table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10 | NodesnAgentRedundant | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1 | NodesnAgentRedunGbl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.1 | ScalarsnAgentRedunActiveMgmtMod | read-write | mandatory | Slot number of the active management module. Setting this object does not take effect immediately. Saving configuration data to flash storage and reboot the sy… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.2 | ScalarsnAgentRedunSyncConfig | read-write | mandatory | Frequency of the backup management module copying the configuration data from the active management module. Each unit is 1 second. Setting a value 0 will disab… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.3 | ScalarsnAgentRedunBkupCopyBootCode | read-write | mandatory | If enabled(1), the backup management module copies the boot code from the active management module to its boot code flash storage after power up, and whenever … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.4 | ScalarsnAgentEnableMgmtModRedunStateChangeTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate management module redundancy state change traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.5 | ScalarsnAgentRedunBkupBootLoad | read-write | mandatory | Action object to down load a new boot code from boot flash storage of the active management module to the backup management module. The following are returned … |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.6 | ScalarsnAgentRedunSwitchOver | read-write | mandatory | To force a switch-over from standby to active state if the backup management module exists in a chassis. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11 | NodesnAgentCpu | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1 | TablesnAgentCpuUtilTable | not-accessible | mandatory | Table to list utilization for all CPUs in the device. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1 | RowsnAgentCpuUtilEntry | not-accessible | mandatory | A row in the CPU utilization table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.1 | ColumnsnAgentCpuUtilSlotNum | read-only | mandatory | The slot number of module which contains the cpu. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.2 | ColumnsnAgentCpuUtilCpuId | read-only | mandatory | The id of cpu. For non-VM1/WSM management module, there is one CPU. For VM1/WSM there's one management CPU and three slave CPUs. The management CPU could be tu… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.3 | ColumnsnAgentCpuUtilInterval | read-only | mandatory | The value, in seconds, for this utilization. For both management and slave CPU, we display utilization for 1 sec, 5 sec, 60 sec and 300 sec interval. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.4 | ColumnsnAgentCpuUtilValue | read-only | mandatory | The statistical CPU utilization in units of one-hundredth of a percent. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12 | NodesnAgentHw | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1 | TablesnAgentHwICBMCounterTable | not-accessible | mandatory | Table to list the ICBM counter values. This table is not supported on 10G module. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1 | RowsnAgentHwICBMCounterEntry | not-accessible | mandatory | A row representing ICBM counter values for that slot. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.1 | ColumnsnAgentHwICBMCounterSlot | read-only | mandatory | Slot number where ICBM resides. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.2 | ColumnsnAgentHwICBMCounterDMA | read-only | mandatory | DMA Id within a slot where ICBM resides. Valid only for Jetcore modules. For non-Jetcore modules, this index is ignored by the agent. In this case, value 0 wil… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.3 | ColumnsnAgentHwICBMCounterFreeDepth | read-only | mandatory | Current depth of the free queue for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.4 | ColumnsnAgentHwICBMCounterWriteDrop | read-only | mandatory | Write sequencer drop count for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.5 | ColumnsnAgentHwICBMCounterWriteInput | read-only | mandatory | Write sequencer input counter for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.6 | ColumnsnAgentHwICBMCounterWriteOutput | read-only | mandatory | Write sequencer output counter for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.7 | ColumnsnAgentHwICBMCounterReadInput | read-only | mandatory | Read sequencer input counter for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.8 | ColumnsnAgentHwICBMCounterReadOutput | read-only | mandatory | Read sequencer output counter for this ICBM. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1 | NodesnStackGen | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.1 | ScalarsnStackPriSwitchMode | read-write | mandatory | The Stackable Management Primary Switch mode either enabled or disabled and the default is disabled mode. enabled(1)...........primary switch enabled disabled(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.2 | ScalarsnStackMaxSecSwitch | read-only | mandatory | The Maximum Secondary Switches are allowed in the Stackable Management Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.3 | ScalarsnStackTotalSecSwitch | read-only | mandatory | The Total Secondary Switches currently connected to the Stackable Management Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.4 | ScalarsnStackSyncAllSecSwitch | read-write | mandatory | Synchronize all the secondary switches in the Stackable Management Group with the following commands. device(2)...........device related parameters. global(3).… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.5 | ScalarsnStackSmSlotIndex | read-write | mandatory | The Slot 0 is the Master slot and Slot 1-8 are slaves. All the slot-based MIB data can be retrieved with respect to this slot index such as snChassis global MI… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.6 | ScalarsnStackFmpSetProcess | read-only | mandatory | normal(0) - The set process is either in an idle state or FMP-SET-SUCCESS state. pending(1) - The pending process is waiting for the result of an FMP-SET. fail… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2 | NodesnStackSecSwitchInfo | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1 | TablesnStackSecSwitchTable | not-accessible | mandatory | If snSwGroupOperMode is configured as basic mode which is VLAN by Port, Layer2 switching, then this table is valid. Each VLAN switch port could have a number o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1 | RowsnStackSecSwitchEntry | not-accessible | mandatory | An entry in the Stackable Management Secondary Switch Information table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.1 | ColumnsnStackSecSwitchIndex | read-only | mandatory | The secondary switch index must not be greater than the snStackMaxSecSwitch. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.2 | ColumnsnStackSecSwitchSlotId | read-write | mandatory | The secondary switch slot ID must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.3 | ColumnsnStackSecSwitchPortCnts | read-only | mandatory | The number of ports in this secondary switch. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.4 | ColumnsnStackSecSwitchEnabled | read-write | mandatory | The secondary switch has been selected to Stackable Management Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.5 | ColumnsnStackSecSwitchAck | read-only | mandatory | The secondary switch has sent reponse to the primary switch. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.6 | ColumnsnStackSecSwitchMacAddr | read-only | mandatory | The secondary switch physical address. The physical address represents a MAC Station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.7 | ColumnsnStackSecSwitchSyncCmd | read-write | mandatory | Synchronize the secondary switches in the Stackable Management Group with the following commands. device(2)...........device related parameters. global(3).....… |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.8 | ColumnsnStackSecSwitchIpAddr | read-write | mandatory | The secondary switch IP Address and is used for manual-command of snStackSecSwitchCfgCmd. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.9 | ColumnsnStackSecSwitchSubnetMask | read-write | mandatory | The secondary switch IP Subnet Mask and is used for manual-command of snStackSecSwitchCfgCmd. |
| 1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.10 | ColumnsnStackSecSwitchCfgCmd | read-write | mandatory | snStackSecSwitchSlotId must be set before the Configuration command sent from the primary switch to the secondary switch either manually or automatically. auto… |