HP-SN-BGP4-GROUP-MIB
280 objects
No module-level DESCRIPTION found.
Imported Objects
| HP-SN-ROOT-MIB | snBgp4 |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress |
| RFC1213-MIB | -- mib-2 -- |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1 | NodesnBgp4Gen | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.1 | ScalarsnBgp4GenAlwaysCompareMed | read-write | mandatory | To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.2 | ScalarsnBgp4GenAutoSummary | read-write | mandatory | To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.3 | ScalarsnBgp4GenDefaultLocalPreference | read-write | mandatory | To set the default local preference attribute. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.4 | ScalarsnBgp4GenDefaultInfoOriginate | read-write | mandatory | To enable/disable the default Information Originate. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.5 | ScalarsnBgp4GenFastExternalFallover | read-write | mandatory | To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.6 | ScalarsnBgp4GenNextBootNeighbors | read-write | mandatory | The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBg… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.7 | ScalarsnBgp4GenNextBootRoutes | read-write | mandatory | The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.8 | ScalarsnBgp4GenSynchronization | read-write | mandatory | To enable/disable the synchronization between BGP and your IGP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.9 | ScalarsnBgp4GenKeepAliveTime | read-write | mandatory | The Keep alive timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.10 | ScalarsnBgp4GenHoldTime | read-write | mandatory | The Hold time timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.11 | ScalarsnBgp4GenRouterId | read-write | mandatory | BGP Router Id. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.12 | ScalarsnBgp4GenTableMap | read-write | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.13 | ScalarsnBgp4GenAdminStat | read-write | mandatory | The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.14 | ScalarsnBgp4GenDefaultMetric | read-write | mandatory | To set default metric values for the BGP4 protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.15 | ScalarsnBgp4GenMaxNeighbors | read-only | mandatory | The maximum number of neighbors can be configured in a BGP Peer Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.16 | ScalarsnBgp4GenMinNeighbors | read-only | mandatory | The minimum number of neighbors can be configured in a BGP Peer Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.17 | ScalarsnBgp4GenMaxRoutes | read-only | mandatory | The maximum configured number of Routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.18 | ScalarsnBgp4GenMinRoutes | read-only | mandatory | The minimum configured number of Routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.19 | ScalarsnBgp4GenMaxAddrFilters | read-only | mandatory | The maximum configured number of BGP4 address filters. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.20 | ScalarsnBgp4GenMaxAggregateAddresses | read-only | mandatory | The maximum configured number of BGP4 aggregate addresses. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.21 | ScalarsnBgp4GenMaxAsPathFilters | read-only | mandatory | The maximum configured number of BGP4 AS-PATH filters. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.22 | ScalarsnBgp4GenMaxCommunityFilters | read-only | mandatory | The maximum configured number of BGP4 Community filters. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.23 | ScalarsnBgp4GenMaxNetworks | read-only | mandatory | The maximum configured number of BGP4 Networks. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.24 | ScalarsnBgp4GenMaxRouteMapFilters | read-only | mandatory | The maximum configured number of BGP4 Route-map Filters. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.25 | ScalarsnBgp4GenNeighPrefixMinValue | read-only | mandatory | The minimum configured value of BGP4 Neighbor Prefix. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.26 | ScalarsnBgp4GenOperNeighbors | read-only | mandatory | The current operational max number of neighbors configured for a BGP Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.27 | ScalarsnBgp4GenOperRoutes | read-only | mandatory | The current operational number of Routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.28 | ScalarsnBgp4GenLocalAs | read-write | mandatory | Bgp4 local autonomous system number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.29 | ScalarsnBgp4GenRoutesInstalled | read-only | mandatory | Bgp4 installed routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.30 | ScalarsnBgp4GenAsPathInstalled | read-only | mandatory | Bgp4 installed autonomous system path. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.31 | ScalarsnBgp4ExternalDistance | read-write | mandatory | Administrative distance for BGP external routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.32 | ScalarsnBgp4InternalDistance | read-write | mandatory | Administrative distance for BGP internal routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.33 | ScalarsnBgp4LocalDistance | read-write | mandatory | Administrative distance for BGP local routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.34 | ScalarsnBgp4OperNumOfAttributes | read-only | mandatory | The operational number of attribute entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.35 | ScalarsnBgp4NextBootMaxAttributes | read-write | mandatory | The next boot maximum attribute entries. 10000 means reset to default. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.36 | ScalarsnBgp4ClusterId | read-write | mandatory | A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.37 | ScalarsnBgp4ClientToClientReflection | read-write | mandatory | To enable/disable the client to client reflection in BGP4. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.38 | ScalarsnBgp4GenTotalNeighbors | read-only | mandatory | The current total number of neighbors running in a BGP Group. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.39 | ScalarsnBgp4GenMaxPaths | read-write | mandatory | The maximum configured number of Paths. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.40 | ScalarsnBgp4GenConfedId | read-write | mandatory | Bgp4 Confederation Id. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.41 | ScalarsnBgp4GenConfedPeers | read-write | mandatory | An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.42 | ScalarsnBgp4GenDampening | read-write | mandatory | The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.43 | ScalarsnBgp4GenDampenHalfLife | read-write | mandatory | Bgp4 Dampening Half Life. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.44 | ScalarsnBgp4GenDampenReuse | read-write | mandatory | Bgp4 Dampening Reuse. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.45 | ScalarsnBgp4GenDampenSuppress | read-write | mandatory | Bgp4 Dampening Suppress. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.46 | ScalarsnBgp4GenDampenMaxSuppress | read-write | mandatory | Bgp4 Dampening Max Suppress Time. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.47 | ScalarsnBgp4GenDampenMap | read-write | mandatory | An octet string of the route-map name for dampening, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2 | NodesnBgp4AddrFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1 | TablesnBgp4AddrFilterTable | not-accessible | mandatory | Bgp4 Address Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1 | RowsnBgp4AddrFilterEntry | not-accessible | mandatory | An entry in the Bgp4 Address Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.1 | ColumnsnBgp4AddrFilterIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.2 | ColumnsnBgp4AddrFilterAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.3 | ColumnsnBgp4AddrFilterSourceIp | read-write | mandatory | Source IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.4 | ColumnsnBgp4AddrFilterSourceMask | read-write | mandatory | Source IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.5 | ColumnsnBgp4AddrFilterDestIp | read-write | mandatory | Destination IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.6 | ColumnsnBgp4AddrFilterDestMask | read-write | mandatory | Destination IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7 | ColumnsnBgp4AddrFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3 | NodesnBgp4AggregateAddr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1 | TablesnBgp4AggregateAddrTable | not-accessible | mandatory | Bgp4 Aggregate Address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1 | RowsnBgp4AggregateAddrEntry | not-accessible | mandatory | An entry in the Bgp4 Aggregate Address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.1 | ColumnsnBgp4AggregateAddrIp | read-only | mandatory | Aggregate Address IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.2 | ColumnsnBgp4AggregateAddrMask | read-only | mandatory | Aggregate Address IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.3 | ColumnsnBgp4AggregateAddrOption | read-only | mandatory | address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.4 | ColumnsnBgp4AggregateAddrMap | read-write | mandatory | This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only tw… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.5 | ColumnsnBgp4AggregateAddrRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4 | NodesnBgp4AsPathFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1 | TablesnBgp4AsPathFilterTable | not-accessible | mandatory | Bgp4 AS-Path Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1 | RowsnBgp4AsPathFilterEntry | not-accessible | mandatory | An entry in the Bgp4 As-path Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.1 | ColumnsnBgp4AsPathFilterIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.2 | ColumnsnBgp4AsPathFilterAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.3 | ColumnsnBgp4AsPathFilterRegExpression | read-write | mandatory | Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.4 | ColumnsnBgp4AsPathFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5 | NodesnBgp4CommunityFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1 | TablesnBgp4CommunityFilterTable | not-accessible | mandatory | Bgp4 Community Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1 | RowsnBgp4CommunityFilterEntry | not-accessible | mandatory | An entry in the Bgp4 Community Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.1 | ColumnsnBgp4CommunityFilterIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.2 | ColumnsnBgp4CommunityFilterAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.3 | ColumnsnBgp4CommunityFilterCommNum | read-write | mandatory | A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.4 | ColumnsnBgp4CommunityFilterInternet | read-write | mandatory | Disabled/Enabled the Internet Community. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.5 | ColumnsnBgp4CommunityFilterNoAdvertise | read-write | mandatory | Do not advertise this route to any peer (internal or external). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.6 | ColumnsnBgp4CommunityFilterNoExport | read-write | mandatory | Do not advertise this route to an EBGP peer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.7 | ColumnsnBgp4CommunityFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.8 | ColumnsnBgp4CommunityFilterLocalAs | read-write | mandatory | Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6 | NodesnBgp4NeighGenCfg | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1 | TablesnBgp4NeighGenCfgTable | not-accessible | mandatory | Bgp4 Neighbor General Configuration table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1 | RowsnBgp4NeighGenCfgEntry | not-accessible | mandatory | An entry in the Bgp4 Community Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.1 | ColumnsnBgp4NeighGenCfgNeighIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.2 | ColumnsnBgp4NeighGenCfgAdvertlevel | read-write | mandatory | To set the minimum interval between the sending of BGP routing updates. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.3 | ColumnsnBgp4NeighGenCfgDefOriginate | read-write | mandatory | To enable/disable the default originate for this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.4 | ColumnsnBgp4NeighGenCfgEbgpMultihop | read-write | mandatory | To enable/disable the EBGP Muitihop for this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.5 | ColumnsnBgp4NeighGenCfgMaxPrefix | read-write | mandatory | To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.6 | ColumnsnBgp4NeighGenCfgNextHopSelf | read-write | mandatory | To enable/disable the next-hop processing of BGP updates on the router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.7 | ColumnsnBgp4NeighGenCfgRemoteAs | read-write | mandatory | To specify a neighbor with an autonomous system number(AS). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.8 | ColumnsnBgp4NeighGenCfgSendComm | read-write | mandatory | To specify that a COMMUNITES attribute should be sent to a BGP neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.9 | ColumnsnBgp4NeighGenCfgWeight | read-write | mandatory | To assign a weight to a neighbor connection. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.10 | ColumnsnBgp4NeighGenCfgWeightFilterList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.11 | ColumnsnBgp4NeighGenCfgRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.12 | ColumnsnBgp4NeighGenCfgUpdateSrcLpbIntf | read-write | mandatory | To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment t… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.13 | ColumnsnBgp4NeighGenCfgRouteRefClient | read-write | mandatory | To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.14 | ColumnsnBgp4NeighGenCfgRemovePrivateAs | read-write | mandatory | To enable/disable filtering private AS number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.15 | ColumnsnBgp4NeighGenCfgEbgpMultihopTtl | read-write | mandatory | The EBGP Muitihop TTL for this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.16 | ColumnsnBgp4NeighGenCfgShutdown | read-write | mandatory | To enable/disable BGP4 Nbr Shutdown. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.17 | ColumnsnBgp4NeighGenCfgKeepAliveTime | read-write | mandatory | The Keep alive timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.18 | ColumnsnBgp4NeighGenCfgHoldTime | read-write | mandatory | The Hold time timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.19 | ColumnsnBgp4NeighGenCfgDefOrigMap | read-write | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.20 | ColumnsnBgp4NeighGenCfgDesc | read-write | mandatory | An octet string of the neighbor description. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.21 | ColumnsnBgp4NeighGenCfgPass | read-write | mandatory | An octet string of the neighbor Md5 password. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7 | NodesnBgp4NeighDistGroup | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1 | TablesnBgp4NeighDistGroupTable | not-accessible | mandatory | Bgp4 Neighbor Distribute Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1 | RowsnBgp4NeighDistGroupEntry | not-accessible | mandatory | An entry in the Bgp4 Distribute Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.1 | ColumnsnBgp4NeighDistGroupNeighIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.2 | ColumnsnBgp4NeighDistGroupDir | read-only | mandatory | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.3 | ColumnsnBgp4NeighDistGroupAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.4 | ColumnsnBgp4NeighDistGroupRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.5 | ColumnsnBgp4NeighDistGroupInFilterList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.6 | ColumnsnBgp4NeighDistGroupOutFilterList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.7 | ColumnsnBgp4NeighDistGroupInIpAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.8 | ColumnsnBgp4NeighDistGroupOutIpAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.9 | ColumnsnBgp4NeighDistGroupInPrefixList | read-write | mandatory | A Prefix name list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.10 | ColumnsnBgp4NeighDistGroupOutPrefixList | read-write | mandatory | A Prefix name list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8 | NodesnBgp4NeighFilterGroup | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1 | TablesnBgp4NeighFilterGroupTable | not-accessible | mandatory | Bgp4 Neighbor Filter Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1 | RowsnBgp4NeighFilterGroupEntry | not-accessible | mandatory | An entry in the Bgp4 Neighbor Filter Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.1 | ColumnsnBgp4NeighFilterGroupNeighIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.2 | ColumnsnBgp4NeighFilterGroupDir | read-only | mandatory | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.3 | ColumnsnBgp4NeighFilterGroupAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.4 | ColumnsnBgp4NeighFilterGroupRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.5 | ColumnsnBgp4NeighFilterGroupInFilterList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.6 | ColumnsnBgp4NeighFilterGroupOutFilterList | read-write | mandatory | A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.7 | ColumnsnBgp4NeighFilterGroupInAsPathAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.8 | ColumnsnBgp4NeighFilterGroupOutAsPathAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.9 | ColumnsnBgp4NeighFilterGroupWeight | read-write | mandatory | To assign a weight to a neighbor filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.10 | ColumnsnBgp4NeighFilterGroupWeightAccessList | read-write | mandatory | A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9 | NodesnBgp4NeighRouteMap | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1 | TablesnBgp4NeighRouteMapTable | not-accessible | mandatory | Bgp4 Neighbor Route Map table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1 | RowsnBgp4NeighRouteMapEntry | not-accessible | mandatory | An entry in the Bgp4 Route Map table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.1 | ColumnsnBgp4NeighRouteMapNeighIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.2 | ColumnsnBgp4NeighRouteMapDir | read-only | mandatory | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.3 | ColumnsnBgp4NeighRouteMapMapName | read-write | mandatory | An octet string of the route-map name, Each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.4 | ColumnsnBgp4NeighRouteMapRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10 | NodesnBgp4Network | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1 | TablesnBgp4NetworkTable | not-accessible | mandatory | Bgp4 Network Weight table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1 | RowsnBgp4NetworkEntry | not-accessible | mandatory | An entry in the Bgp4 Network Weight table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.1 | ColumnsnBgp4NetworkIp | read-only | mandatory | The IP Address for a network entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.2 | ColumnsnBgp4NetworkSubnetMask | read-only | mandatory | The subnet mask for a network entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.3 | ColumnsnBgp4NetworkWeight | read-write | mandatory | To assign a weight to a neighbor connection. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.4 | ColumnsnBgp4NetworkBackdoor | read-write | mandatory | To enable/disable the backdoor for this network. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.5 | ColumnsnBgp4NetworkRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11 | NodesnBgp4Redis | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1 | TablesnBgp4RedisTable | not-accessible | mandatory | The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1 | RowsnBgp4RedisEntry | not-accessible | mandatory | The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.1 | ColumnsnBgp4RedisProtocol | read-only | mandatory | The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the conne… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.2 | ColumnsnBgp4RedisMetric | read-write | mandatory | The metric of using the specified protocol Metric value. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.3 | ColumnsnBgp4RedisRouteMap | read-write | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.4 | ColumnsnBgp4RedisWeight | read-write | mandatory | To assign a weight for the specified protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.5 | ColumnsnBgp4RedisMatchInternal | read-write | mandatory | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.6 | ColumnsnBgp4RedisMatchExternal1 | read-write | mandatory | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.7 | ColumnsnBgp4RedisMatchExternal2 | read-write | mandatory | This object is only applicable to the OSPF protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.8 | ColumnsnBgp4RedisRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12 | NodesnBgp4RouteMapFilter | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1 | TablesnBgp4RouteMapFilterTable | not-accessible | mandatory | Bgp4 RouteMap Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1 | RowsnBgp4RouteMapFilterEntry | not-accessible | mandatory | An entry in the Bgp4 RouteMap Filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.1 | ColumnsnBgp4RouteMapFilterMapName | read-only | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.2 | ColumnsnBgp4RouteMapFilterSequenceNum | read-only | mandatory | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.3 | ColumnsnBgp4RouteMapFilterAction | read-write | mandatory | Action to take if the bgp address match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.4 | ColumnsnBgp4RouteMapFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13 | NodesnBgp4RouteMapMatch | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1 | TablesnBgp4RouteMapMatchTable | not-accessible | mandatory | Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1 | RowsnBgp4RouteMapMatchEntry | not-accessible | mandatory | An entry in the Bgp4 Route Map Match table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.1 | ColumnsnBgp4RouteMapMatchMapName | read-only | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.2 | ColumnsnBgp4RouteMapMatchSequenceNum | read-only | mandatory | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.3 | ColumnsnBgp4RouteMapMatchAsPathFilter | read-write | mandatory | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.4 | ColumnsnBgp4RouteMapMatchCommunityFilter | read-write | mandatory | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.5 | ColumnsnBgp4RouteMapMatchAddressFilter | read-write | mandatory | A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.6 | ColumnsnBgp4RouteMapMatchMetric | read-write | mandatory | To match a metric for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.7 | ColumnsnBgp4RouteMapMatchNextHopList | read-write | mandatory | A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.8 | ColumnsnBgp4RouteMapMatchRouteType | read-write | mandatory | To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.9 | ColumnsnBgp4RouteMapMatchTagList | read-write | mandatory | To match a BGP tag access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.10 | ColumnsnBgp4RouteMapMatchRowMask | read-write | mandatory | This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchE… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.11 | ColumnsnBgp4RouteMapMatchAsPathAccessList | read-write | mandatory | A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.12 | ColumnsnBgp4RouteMapMatchCommunityList | read-write | mandatory | A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.13 | ColumnsnBgp4RouteMapMatchAddressAccessList | read-write | mandatory | A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.14 | ColumnsnBgp4RouteMapMatchAddressPrefixList | read-write | mandatory | Prefix list To match a BGP address access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.15 | ColumnsnBgp4RouteMapMatchNextHopAccessList | read-write | mandatory | A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.16 | ColumnsnBgp4RouteMapMatchNextHopPrefixList | read-write | mandatory | Prefix list To match a BGP address access list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14 | NodesnBgp4RouteMapSet | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1 | TablesnBgp4RouteMapSetTable | not-accessible | mandatory | Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1 | RowsnBgp4RouteMapSetEntry | not-accessible | mandatory | An entry in the Bgp4 Route Map Set table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.1 | ColumnsnBgp4RouteMapSetMapName | read-only | mandatory | An octet string of the route-map name, each character of the name is represented by one octet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.2 | ColumnsnBgp4RouteMapSetSequenceNum | read-only | mandatory | A sequence number for this particular route-map. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.3 | ColumnsnBgp4RouteMapSetAsPathType | read-write | mandatory | To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.4 | ColumnsnBgp4RouteMapSetAsPathString | read-write | mandatory | as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.5 | ColumnsnBgp4RouteMapSetAutoTag | read-write | mandatory | To enable/disable the automatic-tag for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.6 | ColumnsnBgp4RouteMapSetCommunityType | read-write | mandatory | To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 a… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.7 | ColumnsnBgp4RouteMapSetCommunityNum | read-write | deprecated | community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.8 | ColumnsnBgp4RouteMapSetCommunityAdditive | read-write | mandatory | To add the community to the already existing communities. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.9 | ColumnsnBgp4RouteMapSetLocalPreference | read-write | mandatory | To modify a local-preference for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.10 | ColumnsnBgp4RouteMapSetMetric | read-write | mandatory | To modify a metric for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.11 | ColumnsnBgp4RouteMapSetNextHop | read-write | mandatory | To modify the IP address of the next hop for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.12 | ColumnsnBgp4RouteMapSetOrigin | read-write | mandatory | To set the BGP origin code. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.13 | ColumnsnBgp4RouteMapSetTag | read-write | mandatory | To specify the tag for BGP routes. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.14 | ColumnsnBgp4RouteMapSetWeight | read-write | mandatory | To specify the BGP weight for the routing table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.15 | ColumnsnBgp4RouteMapSetRowMask | read-write | mandatory | This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEnt… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.16 | ColumnsnBgp4RouteMapSetCommunityNums | read-write | mandatory | Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.17 | ColumnsnBgp4RouteMapSetDampenHalfLife | read-write | mandatory | Bgp4 Route Map Dampening Half Life. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.18 | ColumnsnBgp4RouteMapSetDampenReuse | read-write | mandatory | Bgp4 Route Map Dampening Reuse. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.19 | ColumnsnBgp4RouteMapSetDampenSuppress | read-write | mandatory | Bgp4 Route Map Dampening Suppress. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.20 | ColumnsnBgp4RouteMapSetDampenMaxSuppress | read-write | mandatory | Bgp4 Route Map Dampening Max Suppress Time. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15 | NodesnBgp4NeighOperStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1 | TablesnBgp4NeighOperStatusTable | not-accessible | mandatory | Bgp4 Neighbor Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1 | RowsnBgp4NeighOperStatusEntry | not-accessible | mandatory | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.1 | ColumnsnBgp4NeighOperStatusIndex | read-only | mandatory | The index for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.2 | ColumnsnBgp4NeighOperStatusIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.3 | ColumnsnBgp4NeighOperStatusRemoteAs | read-only | mandatory | To show a neighbor with an autonomous system number(AS). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.4 | ColumnsnBgp4NeighOperStatusBgpType | read-only | mandatory | To show the type of BGP protocol whether is internal or external. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.5 | ColumnsnBgp4NeighOperStatusState | read-only | mandatory | To show the state of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.6 | ColumnsnBgp4NeighOperStatusKeepAliveTime | read-only | mandatory | The Keep alive timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.7 | ColumnsnBgp4NeighOperStatusHoldTime | read-only | mandatory | The Hold time timer. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.8 | ColumnsnBgp4NeighOperStatusAdvertlevel | read-only | mandatory | To show the minimum interval between the sending of BGP routing updates. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.9 | ColumnsnBgp4NeighOperStatusKeepAliveTxCounts | read-only | mandatory | Keep alive message sent counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.10 | ColumnsnBgp4NeighOperStatusKeepAliveRxCounts | read-only | mandatory | Keep alive message received counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.11 | ColumnsnBgp4NeighOperStatusUpdateTxCounts | read-only | mandatory | Update message sent counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.12 | ColumnsnBgp4NeighOperStatusUpdateRxCounts | read-only | mandatory | Update message received counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.13 | ColumnsnBgp4NeighOperStatusNotifTxCounts | read-only | mandatory | Notification message sent counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.14 | ColumnsnBgp4NeighOperStatusNotifRxCounts | read-only | mandatory | Notification message received counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.15 | ColumnsnBgp4NeighOperStatusOpenTxCounts | read-only | mandatory | Open message sent counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.16 | ColumnsnBgp4NeighOperStatusOpenRxCounts | read-only | mandatory | Open message received counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16 | NodesnBgp4RouteOperStatus | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1 | TablesnBgp4RouteOperStatusTable | not-accessible | mandatory | Bgp4 Routebor Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1 | RowsnBgp4RouteOperStatusEntry | not-accessible | mandatory | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.1 | ColumnsnBgp4RouteOperStatusIndex | read-only | mandatory | The index for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.2 | ColumnsnBgp4RouteOperStatusIp | read-only | mandatory | The IP Address for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.3 | ColumnsnBgp4RouteOperStatusSubnetMask | read-only | mandatory | The IP Subnet Mask for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.4 | ColumnsnBgp4RouteOperStatusNextHop | read-only | mandatory | The next-hop IP for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.5 | ColumnsnBgp4RouteOperStatusMetric | read-only | mandatory | To show the metric value of a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.6 | ColumnsnBgp4RouteOperStatusLocalPreference | read-only | mandatory | To show the local preference of a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.7 | ColumnsnBgp4RouteOperStatusWeight | read-only | mandatory | To show the weight of this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.8 | ColumnsnBgp4RouteOperStatusOrigin | read-only | mandatory | To show the origin of this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.9 | ColumnsnBgp4RouteOperStatusStatus | read-only | mandatory | A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant b… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.10 | ColumnsnBgp4RouteOperStatusRouteTag | read-only | mandatory | To show the route tag of this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.11 | ColumnsnBgp4RouteOperStatusCommunityList | read-only | mandatory | To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.12 | ColumnsnBgp4RouteOperStatusAsPathList | read-only | mandatory | To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17 | NodesnBgp4NeighborSummary | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1 | TablesnBgp4NeighborSummaryTable | not-accessible | mandatory | Bgp4 Routebor Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1 | RowsnBgp4NeighborSummaryEntry | not-accessible | mandatory | An entry in the Bgp4 Operational Status table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.1 | ColumnsnBgp4NeighborSummaryIndex | read-only | mandatory | The index for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.2 | ColumnsnBgp4NeighborSummaryIp | read-only | mandatory | The IP Address for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.3 | ColumnsnBgp4NeighborSummaryState | read-only | mandatory | To show the state of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.4 | ColumnsnBgp4NeighborSummaryStateChgTime | read-only | mandatory | The time of a change of the state of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.5 | ColumnsnBgp4NeighborSummaryRouteReceived | read-only | mandatory | The number of routes received of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.6 | ColumnsnBgp4NeighborSummaryRouteInstalled | read-only | mandatory | The number of routes installed of this neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18 | NodesnBgp4Attribute | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1 | TablesnBgp4AttributeTable | not-accessible | mandatory | Bgp4 Attribute entries table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1 | RowsnBgp4AttributeEntry | not-accessible | mandatory | An entry in the Bgp4 Attribute table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.1 | ColumnsnBgp4AttributeIndex | read-only | mandatory | The index for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.2 | ColumnsnBgp4AttributeNextHop | read-only | mandatory | The next-hop IP for a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.3 | ColumnsnBgp4AttributeMetric | read-only | mandatory | To show the metric value of a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.4 | ColumnsnBgp4AttributeOrigin | read-only | mandatory | To show the origin of this route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.5 | ColumnsnBgp4AttributeAggregatorAs | read-only | mandatory | The aggregator AS number for an attribute entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.6 | ColumnsnBgp4AttributeRouterId | read-only | mandatory | The router ID for an attribute entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.7 | ColumnsnBgp4AttributeAtomicAggregatePresent | read-only | mandatory | The atomic aggregate present in an attribute entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.8 | ColumnsnBgp4AttributeLocalPreference | read-only | mandatory | To show the local preference of a route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.9 | ColumnsnBgp4AttributeCommunityList | read-only | mandatory | To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.10 | ColumnsnBgp4AttributeAsPathList | read-only | mandatory | To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.11 | ColumnsnBgp4AttributeOriginator | read-only | mandatory | The originator IP address for an attribute entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.12 | ColumnsnBgp4AttributeClusterList | read-only | mandatory | To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID w… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19 | NodesnBgp4ClearNeighborCmd | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1 | TablesnBgp4ClearNeighborCmdTable | not-accessible | mandatory | Clear Bgp4 command table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1 | RowsnBgp4ClearNeighborCmdEntry | not-accessible | mandatory | An entry in the clear Bgp4 neighbor command table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.1 | ColumnsnBgp4ClearNeighborCmdIp | read-only | mandatory | The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.2 | ColumnsnBgp4ClearNeighborCmdElement | read-write | mandatory | To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20 | NodesnBgp4NeighPrefixGroup | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1 | TablesnBgp4NeighPrefixGroupTable | not-accessible | mandatory | Bgp4 Neighbor Prefix Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1 | RowsnBgp4NeighPrefixGroupEntry | not-accessible | mandatory | An entry in the Bgp4 Prefix Group table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.1 | ColumnsnBgp4NeighPrefixGroupNeighIp | read-only | mandatory | The IP Address for a neighbor entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.2 | ColumnsnBgp4NeighPrefixGroupDir | read-only | mandatory | The incoming/outgoing advertisements to which the access list is applied. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.3 | ColumnsnBgp4NeighPrefixGroupInAccessList | read-write | mandatory | An in access prefix list name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.4 | ColumnsnBgp4NeighPrefixGroupOutAccessList | read-write | mandatory | An out prefix list name. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.5 | ColumnsnBgp4NeighPrefixGroupRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |