HP-SN-IP-ACL-MIB
42 objects
No module-level DESCRIPTION found.
Imported Objects
| HP-SN-ROOT-MIB | snIp |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | IpAddress |
| SNMPv2-SMI | Counter64 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15 | NodesnAgAcl | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.1 | NodesnAgAclGlobal | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.1.1 | ScalarsnAgAclGblCurRowIndex | read-only | mandatory | The current row index of the ACL table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2 | TablesnAgAclTable | not-accessible | mandatory | Table of Access Control List |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1 | RowsnAgAclEntry | not-accessible | mandatory | An entry in the IP access control list table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.1 | ColumnsnAgAclIndex | read-only | mandatory | The access control list item number for an entry. This is a unique number that identifies different Access list entries combined with the access list name and … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.2 | ColumnsnAgAclNumber | read-write | mandatory | The access control list number for an entry. The standard access list is in the range <1..99>. The extended access list is in the range <100-199>. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.3 | ColumnsnAgAclName | read-write | mandatory | ACL name for an entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.4 | ColumnsnAgAclAction | read-write | mandatory | Action to take if the ip packet matches with this access control list. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.5 | ColumnsnAgAclProtocol | read-write | mandatory | Transport protocol. 0 means any protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.6 | ColumnsnAgAclSourceIp | read-write | mandatory | Source IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.7 | ColumnsnAgAclSourceMask | read-write | mandatory | Source IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.8 | ColumnsnAgAclSourceOperator | read-write | mandatory | Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.9 | ColumnsnAgAclSourceOperand1 | read-write | mandatory | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.10 | ColumnsnAgAclSourceOperand2 | read-write | mandatory | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.11 | ColumnsnAgAclDestinationIp | read-write | mandatory | Destination IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.12 | ColumnsnAgAclDestinationMask | read-write | mandatory | Destination IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.13 | ColumnsnAgAclDestinationOperator | read-write | mandatory | Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.14 | ColumnsnAgAclDestinationOperand1 | read-write | mandatory | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.15 | ColumnsnAgAclDestinationOperand2 | read-write | mandatory | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.16 | ColumnsnAgAclPrecedence | read-write | mandatory | This refers to IP precedence value in the range <0-7> critical(5), flash(3), flash-override(4), immediate(2), internet(6), network(7), priority(1), routine(0) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.17 | ColumnsnAgAclTos | read-write | mandatory | This refers to the IP type of service value in range <0-15> which is the sum of numeric vlaues of the following options - match packets with maximum reliabilit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.18 | ColumnsnAgAclEstablished | read-write | mandatory | Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.19 | ColumnsnAgAclLogOption | read-write | mandatory | Log flag |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.20 | ColumnsnAgAclStandardFlag | read-write | mandatory | Return whether the ACL is standard or extended, 1 for standard ACL |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.21 | ColumnsnAgAclRowStatus | read-write | mandatory | To create or delete a access list entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.22 | ColumnsnAgAclFlowCounter | read-only | mandatory | Approximate count of flows matching individual ACL entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.23 | ColumnsnAgAclPacketCounter | read-only | mandatory | Accurate count of packets matching individual ACL entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.24 | ColumnsnAgAclComments | read-write | mandatory | Remark description of individual ACL entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.25 | ColumnsnAgAclIpPriority | read-write | mandatory | QoS priority option for IP ACL entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.26 | ColumnsnAgAclPriorityForce | read-write | mandatory | Force packet outgoing priority. Not defined(4) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.27 | ColumnsnAgAclPriorityMapping | read-write | mandatory | Map incoming packet priority. Not defined(8) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.28 | ColumnsnAgAclDscpMarking | read-write | mandatory | Mark packets with given DSCP value. Not defined(64) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.29 | ColumnsnAgAclDscpMapping | read-write | mandatory | Map incoming DSCP value. Not defined(64) |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3 | TablesnAgAclBindToPortTable | not-accessible | mandatory | Table of ACL binding to port for router |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1 | RowsnAgAclBindToPortEntry | not-accessible | mandatory | An entry in the ACL-binding-to-port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.1 | ColumnsnAgAclPortNum | read-only | mandatory | Binding-to port num, either physical port or virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.2 | ColumnsnAgAclPortBindDirection | read-only | mandatory | ACL port direction, inbound or outbound |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.3 | ColumnsnAgAclNum | read-write | mandatory | Defined ACL number |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.4 | ColumnsnAgAclNameString | read-write | mandatory | Defined ACL name |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.5 | ColumnsnAgBindPortListInVirtualInterface | read-write | mandatory | Port list for binding virtual interface |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.6 | ColumnsnAgAclPortRowStatus | read-write | mandatory | To create or delete a ACL port entry. |