HP-SN-IP-MIB
361 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1 | NodesnRtIpGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.1 | ScalarsnRtClearArpCache | read-write | mandatory | clear(1) will clear arp cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.2 | ScalarsnRtClearIpCache | read-write | mandatory | clear(1) will clear ip route cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.3 | ScalarsnRtClearIpRoute | read-write | mandatory | clear(1) will clear ip route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.4 | ScalarsnRtBootpServer | read-write | deprecated | IP address of bootp server to which bootp packet need to be relayed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.5 | ScalarsnRtBootpRelayMax | read-write | mandatory | Maximum number of hop the bootp packet should travel. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.6 | ScalarsnRtArpAge | read-write | mandatory | The time in minutes an ARP entry can be valid without relearning. 0 - Don't not age. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.7 | ScalarsnRtIpIrdpEnable | read-write | mandatory | Perform router advertisement on this box. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.8 | ScalarsnRtIpLoadShare | read-write | mandatory | If more than one route available, use them to share load. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.9 | ScalarsnRtIpProxyArp | read-write | mandatory | Enable/disable proxy arp function in the box. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.10 | ScalarsnRtIpRarp | read-write | mandatory | Enable/disable RARP server. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.11 | ScalarsnRtIpTtl | read-write | mandatory | The time to live value to be used in IP header of IP packet generated by the box. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.12 | ScalarsnRtIpSetAllPortConfig | read-write | mandatory | The value of this object is an index number of a snRtIpPortConfigTable row (i.e. snRtIpPortConfigPortIndex), which is the selected row to copy all of its read-… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.13 | ScalarsnRtIpFwdCacheMaxEntries | read-only | mandatory | The maximum number of ip forwarding table entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.14 | ScalarsnRtIpFwdCacheCurEntries | read-only | mandatory | The current number of ip forwarding table entries. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.15 | ScalarsnRtIpMaxStaticRouteEntries | read-only | mandatory | The maximum number of static route entries in the static route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.16 | ScalarsnRtIpDirBcastFwd | read-write | mandatory | Enable/Disable directed broadcast forwarding. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.17 | ScalarsnRtIpLoadShareNumOfPaths | read-write | mandatory | Number of routes are used to share load. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.18 | ScalarsnRtIpLoadShareMaxPaths | read-only | mandatory | Maximum number of routes can be configured to share load. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.19 | ScalarsnRtIpLoadShareMinPaths | read-only | mandatory | Minimum number of routes can be configured to share load. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.20 | ScalarsnRtIpProtocolRouterId | read-write | mandatory | Router Id for all IP Protocols. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.21 | ScalarsnRtIpSourceRoute | read-write | mandatory | Enable/Disable source routing support, ability to drop the source routing packets. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2 | TablesnRtIpStaticRouteTable | not-accessible | mandatory | IP static/default route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1 | RowsnRtIpStaticRouteEntry | not-accessible | mandatory | An entry in the IP static route table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.1 | ColumnsnRtIpStaticRouteIndex | read-only | mandatory | The table index for a static route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.2 | ColumnsnRtIpStaticRouteDest | read-write | mandatory | Destination IP address. 0.0.0.0 for default route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.3 | ColumnsnRtIpStaticRouteMask | read-write | mandatory | Subnet mask associated with the destination IP address. 0.0.0.0 for default route mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.4 | ColumnsnRtIpStaticRouteNextHop | read-write | mandatory | IP address of next hop router that is located on one of the directly attached IP subnet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.5 | ColumnsnRtIpStaticRouteMetric | read-write | mandatory | The metrics to next hop router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.6 | ColumnsnRtIpStaticRouteRowStatus | read-write | mandatory | To create or delete a static route entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.7 | ColumnsnRtIpStaticRouteDistance | read-write | mandatory | Administration distance. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3 | TablesnRtIpFilterTable | not-accessible | mandatory | IP filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1 | RowsnRtIpFilterEntry | not-accessible | mandatory | An entry in the IP filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.1 | ColumnsnRtIpFilterIndex | read-only | mandatory | The table index for a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.2 | ColumnsnRtIpFilterAction | read-write | mandatory | Action to take if the ip packet match with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.3 | ColumnsnRtIpFilterProtocol | read-write | mandatory | Transport protocol. 0 means don't care |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.4 | ColumnsnRtIpFilterSourceIp | read-write | mandatory | Source IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.5 | ColumnsnRtIpFilterSourceMask | read-write | mandatory | Source IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.6 | ColumnsnRtIpFilterDestIp | read-write | mandatory | Destination IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.7 | ColumnsnRtIpFilterDestMask | read-write | mandatory | Destination IP subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.8 | ColumnsnRtIpFilterOperator | read-write | mandatory | Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.9 | ColumnsnRtIpFilterOperand | read-write | mandatory | For now this only refers to transport protocol port number. 0 means NA |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.10 | ColumnsnRtIpFilterRowStatus | read-write | mandatory | To create or delete a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.11 | ColumnsnRtIpFilterEstablished | read-write | mandatory | Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.12 | ColumnsnRtIpFilterQosPriority | read-write | mandatory | The router L4 Qos Priority values are: low(0) high(1) The Priority values are: level0(0), level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), lev… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4 | TablesnRtIpRarpTable | not-accessible | mandatory | IP RARP table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1 | RowsnRtIpRarpEntry | not-accessible | mandatory | An entry in the IP Rarp table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.1 | ColumnsnRtIpRarpIndex | read-only | mandatory | The table index for a Rarp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.2 | ColumnsnRtIpRarpMac | read-write | mandatory | The Mac address for a Rarp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.3 | ColumnsnRtIpRarpIp | read-write | mandatory | The IP address for a Rarp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.4 | ColumnsnRtIpRarpRowStatus | read-write | mandatory | To create or delete a Rarp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5 | TablesnRtStaticArpTable | not-accessible | mandatory | IP static arp table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1 | RowsnRtStaticArpEntry | not-accessible | mandatory | An entry in the IP static arp table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.1 | ColumnsnRtStaticArpIndex | read-only | mandatory | The table index for a static arp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.2 | ColumnsnRtStaticArpIp | read-write | mandatory | The IP address for a static arp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.3 | ColumnsnRtStaticArpMac | read-write | mandatory | The Mac address for a static arp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.4 | ColumnsnRtStaticArpPort | read-write | mandatory | The port index for a static arp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.5 | ColumnsnRtStaticArpRowStatus | read-write | mandatory | To create or delete a Static Arp entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6 | TablesnRtIpPortAddrTable | not-accessible | mandatory | IP port address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1 | RowsnRtIpPortAddrEntry | not-accessible | mandatory | An entry in the IP Port Address table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.1 | ColumnsnRtIpPortAddrPortIndex | read-only | mandatory | The port index for port address entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.2 | ColumnsnRtIpPortAddress | read-only | mandatory | The port IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.3 | ColumnsnRtIpPortSubnetMask | read-write | mandatory | The port IP address subnet mask. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.4 | ColumnsnRtIpPortAddrType | read-write | mandatory | The port IP address type. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.5 | ColumnsnRtIpPortRowStatus | read-write | mandatory | To create or delete a port address entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7 | TablesnRtIpPortAccessTable | not-accessible | mandatory | IP port access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1 | RowsnRtIpPortAccessEntry | not-accessible | mandatory | An entry in the IP Port access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.1 | ColumnsnRtIpPortAccessPortIndex | read-only | mandatory | The port index for port access entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.2 | ColumnsnRtIpPortAccessDirection | read-only | mandatory | The incoming or outgoing check for port access. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.3 | ColumnsnRtIpPortAccessFilters | read-write | mandatory | 1st octet correspond to 1st filter number and so on. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.4 | ColumnsnRtIpPortAccessRowStatus | read-write | mandatory | To create or delete a port access entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8 | TablesnRtIpPortConfigTable | not-accessible | mandatory | IP port Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1 | RowsnRtIpPortConfigEntry | not-accessible | mandatory | An entry in the IP Port Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.1 | ColumnsnRtIpPortConfigPortIndex | read-only | mandatory | The port index for port config entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.2 | ColumnsnRtIpPortMtu | read-write | mandatory | The maximun transfer unit. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.3 | ColumnsnRtIpPortEncap | read-write | mandatory | Data link encapsulation to be used on the IP frame transmitted on the port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.4 | ColumnsnRtIpPortMetric | read-write | mandatory | The metric. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.5 | ColumnsnRtIpPortDirBcastFwd | read-write | mandatory | Enable/Disable directed broadcast forwarding on the port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9 | NodesnRtBcastFwd | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.1 | NodesnRtBcastFwdGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.1.1 | ScalarsnRtUdpBcastFwdEnable | read-write | mandatory | Enable or disable UDP broadcast forwarding service. When UDP broadcast forwarding is enabled, default entries are added to the UDP broadcast forwarding port ta… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2 | NodesnRtUdpBcastFwdPort | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1 | TablesnRtUdpBcastFwdPortTable | not-accessible | mandatory | This table contains a list of UDP port numbers for which forwarding UDP broadcast is enabled. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1 | RowsnRtUdpBcastFwdPortEntry | not-accessible | mandatory | An entry of the UDP broadcast forwarding port table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.1 | ColumnsnRtUdpBcastFwdPortIndex | read-only | mandatory | The table index for a UDP broadcast forwarding port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.2 | ColumnsnRtUdpBcastFwdPortNumber | read-write | mandatory | UDP port number for which UDP broadcast forwarding is enabled. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.3 | ColumnsnRtUdpBcastFwdPortRowStatus | read-write | mandatory | To create or delete a UDP broadcast forwarding port entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3 | NodesnRtUdpHelper | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1 | TablesnRtUdpHelperTable | not-accessible | mandatory | UDP helper table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1 | RowsnRtUdpHelperEntry | not-accessible | mandatory | An entry of the UDP helper table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.1 | ColumnsnRtUdpHelperPortIndex | read-only | mandatory | The port index for a UDP helper entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.2 | ColumnsnRtUdpHelperIndex | read-only | mandatory | The table index for a UDP helper entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.3 | ColumnsnRtUdpHelperAddr | read-write | mandatory | The UDP helper address. This is the address that UDP packets will be forwarded. It can be a helper address or a subnet broadcast address. But it cannot be 255.… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.4 | ColumnsnRtUdpHelperRowStatus | read-write | mandatory | To create or delete a UDP helper entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10 | NodesnRtIpTraceRoute | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1 | NodesnRtIpTraceRouteGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.1 | ScalarsnRtIpTraceRouteTargetAddr | read-write | mandatory | Target IP address of which trace route is performed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.2 | ScalarsnRtIpTraceRouteMinTtl | read-write | mandatory | Minimum TTL value carried in the first probe packet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.3 | ScalarsnRtIpTraceRouteMaxTtl | read-write | mandatory | Maximum TTL value carried in the last probe packet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.4 | ScalarsnRtIpTraceRouteTimeOut | read-write | mandatory | Time out period (in seconds) to wait for the response from the probe packet (i,e, the ICMP packet). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.5 | ScalarsnRtIpTraceRouteControl | read-write | mandatory | Only 'start' and 'abort' are writable values; 'success', 'failure' and 'inProgress' are readeable (or returned) values. Writing 'start' to this object to initi… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2 | NodesnRtIpTraceRouteResult | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1 | TablesnRtIpTraceRouteResultTable | not-accessible | mandatory | Trace route result table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1 | RowsnRtIpTraceRouteResultEntry | not-accessible | mandatory | An entry of the trace route result table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.1 | ColumnsnRtIpTraceRouteResultIndex | read-only | mandatory | The table index for a trace route result entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.2 | ColumnsnRtIpTraceRouteResultAddr | read-only | mandatory | The router or the target address of which forms part of the route to reach the destination address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.3 | ColumnsnRtIpTraceRouteResultRoundTripTime1 | read-only | mandatory | The round trip time between the first probe packet transmitted and the reponse ICMP packet received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.4 | ColumnsnRtIpTraceRouteResultRoundTripTime2 | read-only | mandatory | The round trip time between the second probe packet transmitted and the reponse ICMP packet received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11 | TablesnRtIpFwdCacheTable | not-accessible | mandatory | IP forwarding cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1 | RowsnRtIpFwdCacheEntry | not-accessible | mandatory | An entry in the IP forwarding cache table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.1 | ColumnsnRtIpFwdCacheIndex | read-only | mandatory | The table index for a ip forwarding cache table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.2 | ColumnsnRtIpFwdCacheIp | read-only | mandatory | The IP address of a station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.3 | ColumnsnRtIpFwdCacheMac | read-only | mandatory | The Mac address of an IP station. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.4 | ColumnsnRtIpFwdCacheNextHopIp | read-only | mandatory | The next hop router IP address. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.5 | ColumnsnRtIpFwdCacheOutgoingPort | read-only | mandatory | The outgoing port of which packets will forward to. Return port value of zero to indicate no outgoing port associated to this entry. Non-zero value has the fol… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.6 | ColumnsnRtIpFwdCacheType | read-only | mandatory | The 'dynamic' or 'permanent' type for a ip forwarding cache table entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.7 | ColumnsnRtIpFwdCacheAction | read-only | mandatory | The action to take. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.8 | ColumnsnRtIpFwdCacheFragCheck | read-only | mandatory | Check for fragmentation. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.9 | ColumnsnRtIpFwdCacheSnapHdr | read-only | mandatory | Apply SNAP encapsulation. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.10 | ColumnsnRtIpFwdCacheVLanId | read-only | mandatory | The VLAN ID for a ip forwarding cache table entry. Return VLAN ID value of zero to indicate no VLAN associated to this entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1 | NodesnRtIpRipGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.1 | ScalarsnRtIpRipEnable | read-write | mandatory | Enable/disable ip rip routing. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.2 | ScalarsnRtIpRipUpdateTime | read-write | mandatory | Ip rip update interval in seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.3 | ScalarsnRtIpRipRedisEnable | read-write | mandatory | Enable/disable redistribution to rip. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.4 | ScalarsnRtIpRipRedisDefMetric | read-write | mandatory | Default metric to be used when redistribute route to rip. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.5 | ScalarsnRtIpRipSetAllPortConfig | read-write | mandatory | The value of this object is an index number of a snRtIpRipPortConfigTable row (i.e. snRtIpRipPortConfigPortIndex), which is the selected row to copy all of its… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.6 | ScalarsnRtIpRipGblFiltList | read-write | mandatory | An ip rip global filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable wit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.7 | ScalarsnRtIpRipFiltOnAllPort | read-write | mandatory | Apply the ip rip global filter list snRtIpRipGblFiltList to all interfaces. This object is used to add all rip filter lists and delete all rip filter lists to/… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.8 | ScalarsnRtIpRipDistance | read-write | mandatory | Administration distance. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2 | TablesnRtIpRipPortConfigTable | not-accessible | mandatory | IP Rip port Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1 | RowsnRtIpRipPortConfigEntry | not-accessible | mandatory | An entry in the IP Rip Port Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.1 | ColumnsnRtIpRipPortConfigPortIndex | read-only | mandatory | The port index for ip rip port config entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.2 | ColumnsnRtIpRipPortVersion | read-write | mandatory | The ip rip version on this port. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.3 | ColumnsnRtIpRipPortPoisonReverse | read-write | mandatory | Enable/disable poison reverse. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.4 | ColumnsnRtIpRipPortLearnDefault | read-write | mandatory | Apply the RIP router protocol learn-default option to the interface. The values that can be written are: disabled(0)...deleted the learn default option. enable… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3 | TablesnRtIpRipRedisTable | not-accessible | mandatory | IP Rip Redistribution table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1 | RowsnRtIpRipRedisEntry | not-accessible | mandatory | An entry in the IP Rip Redistribution table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.1 | ColumnsnRtIpRipRedisIndex | read-only | mandatory | The table index for a IP Rip Redistribution entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.2 | ColumnsnRtIpRipRedisAction | read-write | mandatory | The action to take when match this IP Rip Redistribution entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.3 | ColumnsnRtIpRipRedisProtocol | read-write | mandatory | The protocol to be distributed. other(1) cannot be used for SNMP-SET. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.4 | ColumnsnRtIpRipRedisIp | read-write | mandatory | The ip address of the ip route to be distributed. 0.0.0.0 - all routes |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.5 | ColumnsnRtIpRipRedisMask | read-write | mandatory | The ip subnet mask of the ip route to be distributed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.6 | ColumnsnRtIpRipRedisMatchMetric | read-write | mandatory | The metric of the route to be matched to determine the redistribution. 0 - any metric value |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.7 | ColumnsnRtIpRipRedisSetMetric | read-write | mandatory | The new metric of the route to be advertised. 0 - use the default metric. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.8 | ColumnsnRtIpRipRedisRowStatus | read-write | mandatory | To create or delete a Redistribution entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4 | TablesnRtIpRipRouteFilterTable | not-accessible | mandatory | ip rip route filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1 | RowsnRtIpRipRouteFilterEntry | not-accessible | mandatory | An entry of the ip rip route filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.1 | ColumnsnRtIpRipRouteFilterId | read-only | mandatory | The filter ID to identify a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.2 | ColumnsnRtIpRipRouteFilterAction | read-write | mandatory | Action to take if the ip rip packet matched with this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.3 | ColumnsnRtIpRipRouteFilterIpAddr | read-write | mandatory | Route IP address to compare with any route IP addresses in a ip rip packet. IP address 0.0.0.0 always compare equals to any route IP addresses in any ip rip pa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.4 | ColumnsnRtIpRipRouteFilterSubnetMask | read-write | mandatory | Subnet mask to apply to the route IP address in a ip rip packet, the result is compared to snRtIpRipRouteFilterIpAddr. If snRtIpRipRouteFilterIpAddr is 0.0.0.0… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.5 | ColumnsnRtIpRipRouteFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5 | TablesnRtIpRipNbrFilterTable | not-accessible | mandatory | ip rip neighbor filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1 | RowsnRtIpRipNbrFilterEntry | not-accessible | mandatory | An entry of the ip rip neighbor filter table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.1 | ColumnsnRtIpRipNbrFilterId | read-only | mandatory | The filter ID to identify a filter entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.2 | ColumnsnRtIpRipNbrFilterAction | read-write | mandatory | Action to take if the ip rip packet source IP address compares equal to the source IP address in this filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.3 | ColumnsnRtIpRipNbrFilterSourceIp | read-write | mandatory | Source IP address to compare with the source IP address in a ip rip packet. IP address 0.0.0.0 always compares equal to any source IP addresses in any ip rip p… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.4 | ColumnsnRtIpRipNbrFilterRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6 | TablesnRtIpRipPortAccessTable | not-accessible | mandatory | ip interface rip access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1 | RowsnRtIpRipPortAccessEntry | not-accessible | mandatory | An entry of the ip interface rip access table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.1 | ColumnsnRtIpRipPortAccessPort | read-only | mandatory | The ip interface to which the rip filter applies. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.2 | ColumnsnRtIpRipPortAccessDir | read-only | mandatory | The access direction of incoming packet filter or outgoing packet filter. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.3 | ColumnsnRtIpRipPortAccessFilterList | read-write | mandatory | An ip rip filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the snRtIpRipRouteFilterTable with the c… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.4 | ColumnsnRtIpRipPortAccessRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1 | NodesnDvmrpMIBObjects | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.1 | ScalarsnDvmrpVersion | read-only | mandatory | The router's DVMRP version information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.2 | ScalarsnDvmrpEnable | read-write | mandatory | Enable or disable DVMRP on this router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.3 | ScalarsnDvmrpGenerationId | read-only | mandatory | The generation identifier for the routing process. This is used by neighboring routers to detect whether pruning information should be resent. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.4 | ScalarsnDvmrpProbeInterval | read-write | mandatory | This is the time interval at which the router sends out probe messages to discover neighbour routers. Value is in number of seconds. snDvmrpEnable must be 'ena… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.5 | ScalarsnDvmrpReportInterval | read-write | mandatory | This is the time interval at which the router sends out full report messages. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.6 | ScalarsnDvmrpTriggerInterval | read-write | mandatory | This is the time interval at which triggered updates are sent out. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.7 | ScalarsnDvmrpNeighborRouterTimeout | read-write | mandatory | This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this objec… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.8 | ScalarsnDvmrpRouteExpireTime | read-write | mandatory | This is the time interval after which the route expires and becomes unreachable. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this obj… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.9 | ScalarsnDvmrpRouteDiscardTime | read-write | mandatory | This is the time interval after which a route is discarded from the route table. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this obj… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.10 | ScalarsnDvmrpPruneAge | read-write | mandatory | This is the duration of time for which the prune state is stored. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.11 | ScalarsnDvmrpGraftRetransmitTime | read-write | mandatory | This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.12 | ScalarsnDvmrpDefaultRoute | read-write | mandatory | This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this defa… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13 | TablesnDvmrpVInterfaceTable | not-accessible | mandatory | The (conceptual) table listing the router's DVMRP virtual interfaces. snDvmrpEnable must be 'enabled' before this table is read or writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1 | RowsnDvmrpVInterfaceEntry | not-accessible | mandatory | An entry (conceptual row) in the snDvmrpVInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.1 | ColumnsnDvmrpVInterfaceVifIndex | read-only | mandatory | The ifIndex value of this DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.2 | ColumnsnDvmrpVInterfaceType | read-write | mandatory | The type of this DVMRP virtual interface, whether it uses a tunnel, a physical interface for which we are a querier, or a physical interface for which we are n… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.3 | ColumnsnDvmrpVInterfaceOperState | read-only | mandatory | The current operational state of this DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.4 | ColumnsnDvmrpVInterfaceLocalAddress | read-write | mandatory | The IP address of the local end of this DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.5 | ColumnsnDvmrpVInterfaceRemoteAddress | read-write | mandatory | The IP address of the remote end of this DVMRP virtual interface. For a tunnel, this is the IP address of the neighboring router. For a subnet, this is the sub… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.6 | ColumnsnDvmrpVInterfaceRemoteSubnetMask | read-only | mandatory | The subnet mask for a directly connected subnet. For a tunnel, this should be 0.0.0.0. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.7 | ColumnsnDvmrpVInterfaceMetric | read-write | mandatory | The distance metric for this DVMRP virtual interface which is used to calculate distance vectors. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.8 | ColumnsnDvmrpVInterfaceTtlThreshold | read-write | mandatory | This is the minimum time-to-live value to forward the packets out of this virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.9 | ColumnsnDvmrpVInterfaceAdvertiseLocal | read-write | mandatory | Enable or disable the advertising of this local route. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.10 | ColumnsnDvmrpVInterfaceEncapsulation | read-write | mandatory | Enable or disable the encapsulation of the DVMRP control packets when using IPINIP encapsulation. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.11 | ColumnsnDvmrpVInterfaceStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14 | TablesnDvmrpNeighborTable | not-accessible | mandatory | The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving Neighbor Probe messages. snDvmrpEnable must be 'enabled' before this ta… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1 | RowsnDvmrpNeighborEntry | not-accessible | mandatory | An entry (conceptual row) in the snDvmrpNeighborTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.1 | ColumnsnDvmrpNeighborEntryIndex | read-only | mandatory | The table entry index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.2 | ColumnsnDvmrpNeighborVifIndex | read-only | mandatory | The value of VifIndex for the virtual interface used to reach this DVMRP neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.3 | ColumnsnDvmrpNeighborAddress | read-only | mandatory | The IP address of the DVMRP neighbor for which this entry contains information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.4 | ColumnsnDvmrpNeighborUpTime | read-only | mandatory | The time since this DVMRP neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.5 | ColumnsnDvmrpNeighborExpiryTime | read-only | mandatory | The minimum time remaining before this DVMRP neighbor will be aged out. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.6 | ColumnsnDvmrpNeighborGenerationId | read-only | mandatory | The neighboring router's generation identifier. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.7 | ColumnsnDvmrpNeighborMajorVersion | read-only | mandatory | The neighboring router's major DVMRP version number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.8 | ColumnsnDvmrpNeighborMinorVersion | read-only | mandatory | The neighboring router's minor DVMRP version number. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.9 | ColumnsnDvmrpNeighborCapabilities | read-only | mandatory | This object describes the neighboring router's capabilities. The following shows the position of each bit: bit position meaning 3 mtrace bit 2 generationID bit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15 | TablesnDvmrpRouteTable | not-accessible | mandatory | The routing table used by DVMRP in place of the unicast routing table. snDvmrpEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1 | RowsnDvmrpRouteEntry | not-accessible | mandatory | An entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.1 | ColumnsnDvmrpRouteEntryIndex | read-only | mandatory | The table entry index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.2 | ColumnsnDvmrpRouteSource | read-only | mandatory | The network address which when combined with the corresponding value of snDvmrpRouteSourceMask identifies the sources for which this entry contains multicast r… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.3 | ColumnsnDvmrpRouteSourceMask | read-only | mandatory | The network mask which when combined with the corresponding value of snDvmrpRouteSource identifies the sources for which this entry contains multicast routing … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.4 | ColumnsnDvmrpRouteUpstreamNeighbor | read-only | mandatory | The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.5 | ColumnsnDvmrpRouteVifIndex | read-only | mandatory | The value of snDvmrpVInterfaceVifIndex for the virtual interface on which IP datagrams sent by these sources are received. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.6 | ColumnsnDvmrpRouteMetric | read-only | mandatory | The distance in hops to the source subnet. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.7 | ColumnsnDvmrpRouteExpiryTime | read-only | mandatory | The minimum amount of time remaining before this entry will be aged out. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16 | TablesnDvmrpRouteNextHopTable | not-accessible | mandatory | The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. snDvmrpEnable must be 'enabled' befor… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1 | RowsnDvmrpRouteNextHopEntry | not-accessible | mandatory | An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.1 | ColumnsnDvmrpRouteNextHopSource | read-only | mandatory | The network address which when combined with the corresponding value of snDvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a n… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.2 | ColumnsnDvmrpRouteNextHopSourceMask | read-only | mandatory | The network mask which when combined with the corresponding value of snDvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.3 | ColumnsnDvmrpRouteNextHopVifIndex | read-only | mandatory | The snDvmrpVInterfaceVifIndex value of the virtual interface for the outgoing interface for this next hop. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.4 | ColumnsnDvmrpRouteNextHopType | read-only | mandatory | Type is leaf if no neighbors exist on the outgoing virtual interface. Otherwise, type is branch. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17 | TablesnDvmrpVIfStatTable | not-accessible | mandatory | The (conceptual) table listing the router's DVMRP virtual interface statistical counters. snDvmrpEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1 | RowsnDvmrpVIfStatEntry | not-accessible | mandatory | An entry (conceptual row) in the snDvmrpVIfStatTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.1 | ColumnsnDvmrpVIfStatVifIndex | read-only | mandatory | The ifIndex value of this DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.2 | ColumnsnDvmrpVIfStatInPkts | read-only | mandatory | The number of packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.3 | ColumnsnDvmrpVIfStatOutPkts | read-only | mandatory | The number of packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.4 | ColumnsnDvmrpVIfStatInOctets | read-only | mandatory | The number of octets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.5 | ColumnsnDvmrpVIfStatOutOctets | read-only | mandatory | The number of octets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.6 | ColumnsnDvmrpVIfStatInProbePkts | read-only | mandatory | The number of probe packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.7 | ColumnsnDvmrpVIfStatOutProbePkts | read-only | mandatory | The number of probe packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.8 | ColumnsnDvmrpVIfStatDiscardProbePkts | read-only | mandatory | The number of probe packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.9 | ColumnsnDvmrpVIfStatInRtUpdatePkts | read-only | mandatory | The number of route update packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.10 | ColumnsnDvmrpVIfStatOutRtUpdatePkts | read-only | mandatory | The number of route update packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.11 | ColumnsnDvmrpVIfStatDiscardRtUpdatePkts | read-only | mandatory | The number of route update packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.12 | ColumnsnDvmrpVIfStatInGraftPkts | read-only | mandatory | The number of graft packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.13 | ColumnsnDvmrpVIfStatOutGraftPkts | read-only | mandatory | The number of graft packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.14 | ColumnsnDvmrpVIfStatDiscardGraftPkts | read-only | mandatory | The number of graft packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.15 | ColumnsnDvmrpVIfStatInGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.16 | ColumnsnDvmrpVIfStatOutGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.17 | ColumnsnDvmrpVIfStatDiscardGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.18 | ColumnsnDvmrpVIfStatInPrunePkts | read-only | mandatory | The number of prune packets that have arrived on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.19 | ColumnsnDvmrpVIfStatOutPrunePkts | read-only | mandatory | The number of prune packets that have been sent on the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.20 | ColumnsnDvmrpVIfStatDiscardPrunePkts | read-only | mandatory | The number of prune packets that have been discarded by the DVMRP virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1 | NodesnFsrpGlobal | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1.1 | ScalarsnFsrpGroupOperMode | read-write | mandatory | The FSRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable FSRP enabled(1)...........activ… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.1.2 | ScalarsnFsrpIfStateChangeTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate FSRP interface state change traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2 | NodesnFsrpIntf | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1 | TablesnFsrpIfTable | not-accessible | mandatory | The FSRP Interface Table describes the interfaces from the viewpoint of FSRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1 | RowsnFsrpIfEntry | not-accessible | mandatory | The FSRP Interface Entry describes one interface from the viewpoint of FSRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.1 | ColumnsnFsrpIfPort | read-only | mandatory | The physical router port of this FSRP interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.2 | ColumnsnFsrpIfIpAddress | read-only | mandatory | The IP Address of the physical router port of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.3 | ColumnsnFsrpIfVirRtrIpAddr | read-write | mandatory | The IP Address of the Virtual Router for the interface. The Virtual Router IP address need to be configured on the interface before Redundant Router Function c… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.4 | ColumnsnFsrpIfOtherRtrIpAddr | read-write | mandatory | The IP Address of the Other Router on this ip subnet that operates FSRP and to whom the Keep Alive message need to be sent by this router. This object must be … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.5 | ColumnsnFsrpIfPreferLevel | read-write | mandatory | The higher the number the higher the priority is. This parameter decides which router should becomes the Active Router for the interface. A Router with higher … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.6 | ColumnsnFsrpIfTrackPortMask | read-write | mandatory | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.7 | ColumnsnFsrpIfRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.8 | ColumnsnFsrpIfState | read-only | mandatory | This object specifies the FSRP Router's interface state as: init(0)...initialization state. negotiating(1)...negotiating state. standby(2)...standby state. act… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.9 | ColumnsnFsrpIfKeepAliveTime | read-write | mandatory | The heart-beat is from 1 to 120 seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.10 | ColumnsnFsrpIfRouterDeadTime | read-write | mandatory | The hold time of the Fsrp router is from 3 to 255 seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.11 | ColumnsnFsrpIfChassisTrackPortMask | read-write | mandatory | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.8.1 | NodesnGblRtGeneral | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.8.1.1 | ScalarsnGblRtRouteOnly | read-write | mandatory | If this object is 'enabled', this switching router will only route packets. If this object is 'disabled', this switching router will first route packets. If ro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1 | NodesnPimMIBObjects | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.1 | ScalarsnPimEnable | read-write | mandatory | Enable or disable PIM on this router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.2 | ScalarsnPimNeighborRouterTimeout | read-write | mandatory | This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snPimEnable must be 'enabled' before this object … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.3 | ScalarsnPimHelloTime | read-write | mandatory | This is the interval at which hello message is sent out an interface to the neighbouring router. This is used to detect the presence or abscense of a neighbour… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.4 | ScalarsnPimPruneTime | read-write | mandatory | This is the duration of time for which the prune state is stored. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.5 | ScalarsnPimGraftRetransmitTime | read-write | mandatory | This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.6 | ScalarsnPimInactivityTime | read-write | mandatory | This is the interval after which the forwarding entry is deleted. When a packet is received for a group entry, this time is reset. This is used to only keep th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7 | TablesnPimVInterfaceTable | not-accessible | mandatory | The (conceptual) table listing the router's PIM virtual interfaces. snPimEnable must be 'enabled' before this table is read or writen. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1 | RowsnPimVInterfaceEntry | not-accessible | mandatory | An entry (conceptual row) in the snPimVInterfaceTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.1 | ColumnsnPimVInterfaceVifIndex | read-only | mandatory | The ifIndex value of this PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.2 | ColumnsnPimVInterfaceType | read-write | mandatory | The type of PIM virtual interface, whether it uses a tunnel or a physical interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.3 | ColumnsnPimVInterfaceLocalAddress | read-write | mandatory | The IP address of the local end of this PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.4 | ColumnsnPimVInterfaceLocalSubnetMask | read-only | mandatory | The network mask for the IP address of the PIM virtual interface. For a tunnel, this should be 0.0.0.0. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.5 | ColumnsnPimVInterfaceRemoteAddress | read-write | mandatory | The IP address of the remote end of this PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.6 | ColumnsnPimVInterfaceDR | read-only | mandatory | The Designated Router on this PIM virtual interface. For point-to-point interfaces, this object has the value 0.0.0.0. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.7 | ColumnsnPimVInterfaceTtlThreshold | read-write | mandatory | This is the minimum time-to-live value to forward the packets out of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.8 | ColumnsnPimVInterfaceStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8 | TablesnPimNeighborTable | not-accessible | mandatory | The (conceptual) table listing the router's PIM neighbors. snPimEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1 | RowsnPimNeighborEntry | not-accessible | mandatory | An entry (conceptual row) in the snPimNeighborTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.1 | ColumnsnPimNeighborEntryIndex | read-only | mandatory | The table entry index. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.2 | ColumnsnPimNeighborVifIndex | read-only | mandatory | The value of VifIndex for the virtual interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.3 | ColumnsnPimNeighborAddress | read-only | mandatory | The IP address of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.4 | ColumnsnPimNeighborUpTime | read-only | mandatory | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.5 | ColumnsnPimNeighborExpiryTime | read-only | mandatory | The minimum time remaining before this PIM neighbor will be aged out. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9 | TablesnPimVIfStatTable | not-accessible | mandatory | The (conceptual) table listing the router's PIM virtual interface statistical counters. snPimEnable must be 'enabled' before this table is read. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1 | RowsnPimVIfStatEntry | not-accessible | mandatory | An entry (conceptual row) in the snPimVIfStatTable. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.1 | ColumnsnPimVIfStatVifIndex | read-only | mandatory | The ifIndex value of this PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.2 | ColumnsnPimVIfStatInJoinPkts | read-only | mandatory | The number of join packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.3 | ColumnsnPimVIfStatOutJoinPkts | read-only | mandatory | The number of join packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.4 | ColumnsnPimVIfStatDiscardJoinPkts | read-only | mandatory | The number of join packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.5 | ColumnsnPimVIfStatInPrunePkts | read-only | mandatory | The number of prune packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.6 | ColumnsnPimVIfStatOutPrunePkts | read-only | mandatory | The number of prune packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.7 | ColumnsnPimVIfStatDiscardPrunePkts | read-only | mandatory | The number of prune packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.8 | ColumnsnPimVIfStatInAssertPkts | read-only | mandatory | The number of assert packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.9 | ColumnsnPimVIfStatOutAssertPkts | read-only | mandatory | The number of assert packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.10 | ColumnsnPimVIfStatDiscardAssertPkts | read-only | mandatory | The number of assert packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.11 | ColumnsnPimVIfStatInHelloPkts | read-only | mandatory | The number of hello packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.12 | ColumnsnPimVIfStatOutHelloPkts | read-only | mandatory | The number of hello packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.13 | ColumnsnPimVIfStatDiscardHelloPkts | read-only | mandatory | The number of hello packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.14 | ColumnsnPimVIfStatInGraftPkts | read-only | mandatory | The number of graft packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.15 | ColumnsnPimVIfStatOutGraftPkts | read-only | mandatory | The number of graft packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.16 | ColumnsnPimVIfStatDiscardGraftPkts | read-only | mandatory | The number of graft packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.17 | ColumnsnPimVIfStatInGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have arrived on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.18 | ColumnsnPimVIfStatOutGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have been sent on the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.19 | ColumnsnPimVIfStatDiscardGraftAckPkts | read-only | mandatory | The number of graft acknowledge packets that have been discarded by the PIM virtual interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1 | NodesnVrrpGlobal | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.1 | ScalarsnVrrpGroupOperMode | read-write | mandatory | The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activ… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.2 | ScalarsnVrrpIfStateChangeTrap | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate VRRP interface state change traps. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.3 | ScalarsnVrrpIfMaxNumVridPerIntf | read-only | mandatory | Indicates the maximum number of VRID per interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.4 | ScalarsnVrrpIfMaxNumVridPerSystem | read-only | mandatory | Indicates the maximum number of VRID per system. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.5 | ScalarsnVrrpClearVrrpStat | read-write | mandatory | Clear VRRP statistics command. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2 | NodesnVrrpIntf | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1 | TablesnVrrpIfTable | not-accessible | mandatory | The VRRP Interface Table describes the interfaces from the viewpoint of VRRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1 | RowsnVrrpIfEntry | not-accessible | mandatory | The VRRP Interface Entry describes one interface from the viewpoint of VRRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.1 | ColumnsnVrrpIfPort | read-only | mandatory | The IP port of this VRRP interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.2 | ColumnsnVrrpIfAuthType | read-write | mandatory | The authentication type of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.3 | ColumnsnVrrpIfAuthPassword | read-write | mandatory | The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.4 | ColumnsnVrrpIfRxHeaderErrCnts | read-only | mandatory | The received Header error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.5 | ColumnsnVrrpIfRxAuthTypeErrCnts | read-only | mandatory | The received authentication type error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.6 | ColumnsnVrrpIfRxAuthPwdMismatchErrCnts | read-only | mandatory | The received authentication password mismatched error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.7 | ColumnsnVrrpIfRxVridErrCnts | read-only | mandatory | The received unfound VRID error counts in this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3 | NodesnVrrpVirRtr | |||
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1 | TablesnVrrpVirRtrTable | not-accessible | mandatory | The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1 | RowsnVrrpVirRtrEntry | not-accessible | mandatory | The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.1 | ColumnsnVrrpVirRtrPort | read-only | mandatory | The IP port of this VRRP interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.2 | ColumnsnVrrpVirRtrId | read-only | mandatory | One of the virtual router ID of this VRRP interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.3 | ColumnsnVrrpVirRtrOwnership | read-write | mandatory | The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.4 | ColumnsnVrrpVirRtrCfgPriority | read-write | mandatory | The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Route… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.5 | ColumnsnVrrpVirRtrTrackPriority | read-write | mandatory | The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically … |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.6 | ColumnsnVrrpVirRtrCurrPriority | read-only | mandatory | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes fro… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.7 | ColumnsnVrrpVirRtrHelloInt | read-write | mandatory | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.8 | ColumnsnVrrpVirRtrDeadInt | read-write | mandatory | Dead interval (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.9 | ColumnsnVrrpVirRtrPreemptMode | read-write | mandatory | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.10 | ColumnsnVrrpVirRtrState | read-only | mandatory | This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.11 | ColumnsnVrrpVirRtrActivate | read-write | mandatory | This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.12 | ColumnsnVrrpVirRtrIpAddrMask | read-write | mandatory | The numbers of IP Addresses of this virtual router of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13 | ColumnsnVrrpVirRtrTrackPortMask | read-write | mandatory | This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this objec… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.14 | ColumnsnVrrpVirRtrTrackVifMask | read-write | mandatory | This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this o… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.15 | ColumnsnVrrpVirRtrRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.16 | ColumnsnVrrpVirRtrRxArpPktDropCnts | read-only | mandatory | The received VRRP ARP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.17 | ColumnsnVrrpVirRtrRxIpPktDropCnts | read-only | mandatory | The received VRRP IP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.18 | ColumnsnVrrpVirRtrRxPortMismatchCnts | read-only | mandatory | The received VRRP Port mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.19 | ColumnsnVrrpVirRtrRxNumOfIpMismatchCnts | read-only | mandatory | The received VRRP Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.20 | ColumnsnVrrpVirRtrRxIpMismatchCnts | read-only | mandatory | The received VRRP IP Address mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.21 | ColumnsnVrrpVirRtrRxHelloIntMismatchCnts | read-only | mandatory | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.22 | ColumnsnVrrpVirRtrRxPriorityZeroFromMasterCnts | read-only | mandatory | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.23 | ColumnsnVrrpVirRtrRxHigherPriorityCnts | read-only | mandatory | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.24 | ColumnsnVrrpVirRtrTransToMasterStateCnts | read-only | mandatory | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.25 | ColumnsnVrrpVirRtrTransToBackupStateCnts | read-only | mandatory | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.26 | ColumnsnVrrpVirRtrCurrDeadInt | read-only | mandatory | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1 | TablesnLoopbackIntfConfigTable | not-accessible | mandatory | Loopback Interface Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1 | RowsnLoopbackIntfConfigEntry | not-accessible | mandatory | An entry in the Loopback Interface Config table. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.1 | ColumnsnLoopbackIntfConfigPortIndex | read-only | mandatory | The port index for Loopback Interface config entry. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.2 | ColumnsnLoopbackIntfMode | read-write | mandatory | The Loopback Interface mode. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.3 | ColumnsnLoopbackIntfRowStatus | read-write | mandatory | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Action | INTEGER { deny(0), permit(1) } | ||
| ClearStatus | INTEGER { normal(0), clear(1) } | ||
| DisplayString | OCTET STRING | ||
| Metric | INTEGER (0..'FFFF'h) | ||
| PhysAddress | OCTET STRING | ||
| PortIndex | INTEGER (1..3900) | ||
| PortMask | INTEGER | ||
| RowSts | INTEGER { other(1), valid(2), delete(3), create(4) } | ||
| RtrStatus | INTEGER { disabled(0), enabled (1) } |