HP700RX-MIB
104 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1065-SMI MISSING | Counter enterprises Gauge IpAddress NetworkAddress TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.3 | Nodesystem | |||
| 1.3.6.1.4.1.11.2.3.9 | NodenetPeripherals | |||
| 1.3.6.1.4.1.11.2.3.9.3 | NodehpXStation | |||
| 1.3.6.1.4.1.11.2.3.9.3.1 | Nodeconfig | |||
| 1.3.6.1.4.1.11.2.3.9.3.1.1 | Nodeterminal | |||
| 1.3.6.1.4.1.11.2.3.9.3.1.1.1 | Scalarmonitor | read-write | mandatory | The type of monitor the terminal is configured to drive. Each monitor type varies in resolution, refresh rate, color capability, dots per inch, and synchroniza… |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.2 | ScalarmonitorDescription | read-only | mandatory | The resolution, refresh rate, color capability, dots per inch, and synchronization the terminal is sending to its monitor and the part number of the monitor th… |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.3 | Scalarat2kbLEDControl | read-write | mandatory | Indicates whether the CAPS-LOCK LED on the keyboard (if present) is controlled by the X terminal or the clients (as X LED 3). |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.4 | Scalarat2kbLanguage | read-write | mandatory | The language setting for an AT/2 keyboard attached to this terminal. |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.5 | ScalarserialSpeed | read-write | mandatory | The baud rate of the serial port. |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.6 | ScalarserialDataBits | read-write | mandatory | The number of data bits in each character sent and received over the serial port. |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.7 | ScalarserialStopBits | read-write | mandatory | The number of stop bits sent at the end of each character sent through the serial port. |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.8 | ScalarserialParity | read-write | mandatory | The parity generated and checked on each character sent and received through the serial port. |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.9 | ScalarserialPacing | read-write | mandatory | The type of flow control used on the serial port. |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.10 | ScalarserialUse | read-write | mandatory | What the serial port is being used for. Note that primary and auxiliary use indicate that the serial port is 'connected' to TCP ports 9100 and 9101 respectivel… |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.11 | ScalarparallelUse | read-write | mandatory | What the parallel port is being used for. Note that primary and auxiliary use indicate that the serial port is 'connected' to TCP ports 9100 and 9101 respectiv… |
| 1.3.6.1.4.1.11.2.3.9.3.1.1.12 | ScalarportuseEnable | read-write | mandatory | This variable indicates whether remote (through SNMP) serial port use changes are allowed. |
| 1.3.6.1.4.1.11.2.3.9.3.1.2 | Nodenetwork | |||
| 1.3.6.1.4.1.11.2.3.9.3.1.2.1 | ScalarnetworkParamsFrom | read-write | mandatory | Indicates whether the X terminal will use bootp to get its network parameters (IP address, default gateway, boot file, terminal name, domain name, name server … |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.2 | ScalarconfigedAddress | read-write | mandatory | The IP address configured for the Ethernet interface on this terminal. The active value for this field is set at startup. After startup a different value can b… |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.3 | ScalarconfigedSubnetMask | read-write | mandatory | The subnet mask configured for the Ethernet interface on this terminal. The active value for this field is set at startup. After startup a different value can … |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.4 | TableconfigedRouteTable | not-accessible | mandatory | The routes configured for this terminal. At startup the terminal tests the routes in its routing table. If any route fails, it will be discarded, therefore the… |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.4.1 | RowrouteTableEntry | not-accessible | mandatory | Each entry reflects one route. |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.4.1.1 | ColumnrouteIndex | read-only | mandatory | The number of a row in the gateway table on the Network config screen. |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.4.1.2 | ColumnrouteGateway | read-write | mandatory | The address of an intermediate machine to send packets to. Note that this is a string and may be either a dotted decimal IP address or a domain name. |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.4.1.3 | ColumnrouteDestination | read-write | mandatory | The final destination address for this route. This may be a machine or a network. Note that this is a string and may be either a dotted decimal IP address or a… |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.5 | ScalarprimaryFileServer | read-write | mandatory | The address of the first file server the terminal attempts to contact at startup. This may be either a node name (in which case it will be resolved to an addre… |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.6 | ScalarprimaryAccessMethod | read-write | mandatory | The method used to read files from the primary file server. This method may be overridden for individual paths. |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.7 | ScalaralternateFileServer | read-write | mandatory | The address of the file server the terminal will attempt to contact at startup if the primary file server cannot be reached. This address may be the node name … |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.8 | ScalaralternateAccessMethod | read-write | mandatory | The method used to read files from the alternative file server. This method may be overridden for individual pathes. |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.9 | ScalarfileTimeout | read-write | mandatory | The maximum time (in seconds) that the terminal will wait for a response to a request to the file server before giving up. The name resolver timeout is six tim… |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.10 | ScalarprimaryNameServer | read-write | mandatory | The primary name server's IP address in dotted decimal format. |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.11 | ScalaralternateNameServer | read-write | mandatory | The alternative name server's IP address in dotted decimal format. If no answer is received from the primary name server, the terminal attempts to contact this… |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.12 | Scalardomain | read-write | mandatory | The fully qualified domain of the network to which the terminal is connected. This includes all parts following the first '.' (dot) in the fully qualified host… |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.13 | ScalarterminalName | read-write | mandatory | The name assigned to this terminal. This name should correspond to the name assigned using the Domain Name service, Network Information Services, and other hos… |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.14 | ScalarslipLocalAddress | read-write | mandatory | The address used for the terminal end of the SLIP connection. |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.15 | ScalarslipRemoteAddress | read-write | mandatory | The address used for the remote (host) end end of the SLIP connection. |
| 1.3.6.1.4.1.11.2.3.9.3.1.2.16 | ScalarslipMask | read-write | mandatory | The subnet mask configured for the SLIP interface on this terminal. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3 | Nodestartup | |||
| 1.3.6.1.4.1.11.2.3.9.3.1.3.1 | ScalarromFonts | read-write | mandatory | Controls whether or not fonts are read from the ROM card (if present). |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.2 | ScalarrgbFileFrom | read-write | mandatory | Controls whether or not the rgb.txt file is read from the ROM card (if present). |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.3 | ScalarbootFileFrom | read-write | mandatory | Controls whether or not the X server file is read from the ROM card (if present). |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.4 | ScalarbootFileName | read-write | mandatory | The name of the X server file to load. This may be a complete path (starting with /) and may include host and access method overrides. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.5 | ScalarremoteConfigEnabled | read-write | mandatory | Controls whether or not the remote config file is read from the file server at startup. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.6 | ScalarremoteConfigFile | read-write | mandatory | The name of the remote config file to load at startup. This may be a complete path (starting with /) and include host and access method overrides. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.7 | ScalarxdmcpEnabled | read-write | mandatory | Controls whether or not XDMCP is used to start user sessions on this terminal. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.8 | ScalarxdmcpType | read-write | mandatory | Controls the type of XDMCP request sent from the terminal at startup. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.9 | ScalarxdmcpHost | read-write | mandatory | The address of the host to which the terminal sends XDMCP requests at startup. This field is ignored if XDMCP type is BROADCAST. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.10 | ScalartelnetAutoStart | read-write | mandatory | Determines whether a TELNET session is auto- started at boot time. TELNET can be used to start a user session, but TELNET cannot be used if XDMCP is enabled. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.11 | ScalartelnetCharSet | read-write | mandatory | Controls the character set used to display characters in the TELNET and serial terminal sessions. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.12 | ScalartelnetHost | read-write | mandatory | The address of the host to attempt to connect to when TELNET is (auto)started. This may be a name or IP address in dotted decimal format. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.13 | TablefontPathTable | not-accessible | mandatory | A list of directory paths used when by the X server when searching for fonts |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.13.1 | RowfontEntry | not-accessible | mandatory | An single path to a set of font files. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.13.1.1 | ColumnfontIndex | read-only | mandatory | The index into the list of font paths. |
| 1.3.6.1.4.1.11.2.3.9.3.1.3.13.1.2 | ColumnfontPath | read-write | mandatory | The actual font path in the format appropriate to the operating system in use. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4 | Nodestatistics | |||
| 1.3.6.1.4.1.11.2.3.9.3.1.4.1 | ScalarmemInstalled | read-only | mandatory | The amount of memory installed in the terminal (excluding video memory) in Kbytes. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.2 | ScalarmemFree | read-only | mandatory | The amount of memory in the free pool (including free video memory). This is the total amount of memory that is not currently in use in the terminal. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.3 | ScalarmemLowMark | read-only | mandatory | The size of the free pool at its smallest since the last time this counter was reset. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.4 | ScalarmemFrags | read-only | mandatory | The number of fragments (of all sizes) in the memory free pool. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.5 | ScalarmemLargestFrag | read-only | mandatory | The size of the largest fragment in the free pool in Kbytes. This represents the largest request for memory that can be fulfilled by the terminal. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.6 | ScalarmemBackingstore | read-only | mandatory | The amount of memory used for backingstore in Kbytes. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.7 | ScalarmemReclaims | read-only | mandatory | The number of times memory has been reclaimed from backing store for other uses. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.8 | ScalarserialInOctets | read-only | mandatory | The number of octets received through the serial port since the last time this counter was reset. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.9 | ScalarserialOutOctets | read-only | mandatory | The number of octets sent out the serial port since The last time this counter was reset. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.10 | ScalarserialInErrors | read-only | mandatory | The number of errors detected on data received in the serial port. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.11 | ScalarparallelOutOctets | read-only | mandatory | The number of octets sent out the parallel port since the last time this counter was reset. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.12 | ScalarparallelErrors | read-only | mandatory | The number of errors detected in sending data out the parallel port since the last time this counter was reset. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.13 | ScalaretherInPackets | read-only | mandatory | The number of packets received over Ethernet. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.14 | ScalaretherInCRCErrors | read-only | mandatory | The number of CRC errors detected in Ethernet packets. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.15 | ScalaretherInNoBuffers | read-only | mandatory | The number of time the Ethernet interface hardware could not receive packets because no buffers were available. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.16 | ScalaretherInRunts | read-only | mandatory | The number of packets received on the Ethernet interface that were shorter then the shortest permitted packet. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.17 | ScalaretherInOctets | read-only | mandatory | The number of octets received on the Ethernet interface. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.18 | ScalaretherOutPackets | read-only | mandatory | The number of packets sent out the Ethernet interface. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.19 | ScalaretherOutOneCollisions | read-only | mandatory | The number of times the Ethernet interface had to back off once due to a collision. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.20 | ScalaretherOutTwoCollisions | read-only | mandatory | The number of times the Ethernet interface had to back off twice due to collisions. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.21 | ScalaretherOutMoreCollisions | read-only | mandatory | The number of messages for which the Ethernet interface had to back off more then twice (but less then the maximum number of times) due to collisions. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.22 | ScalaretherOutMaxCollisions | read-only | mandatory | The number of times that the Ethernet interface was unable to transmit a packet due to too many collisions. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.23 | ScalaretherOutNoBuffers | read-only | mandatory | The number of times that the Ethernet interface software had to drop an outbound packet because there were no more interface transmit buffers. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.24 | ScalaretherOutOctets | read-only | mandatory | The number of octets sent out the Ethernet interface. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.25 | ScalartftpTimeouts | read-only | mandatory | The number of times that the tftp driver has not gotten a response within the file timeout period. This is not the number of retransmits performed by the tftp … |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.26 | ScalarstatsTime | read-only | mandatory | The statistics information can be cleared (to zero) by depressing a button on the statistics screen. This variable indicates the time since this was last done.… |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.27 | ScalarslipInPackets | read-only | mandatory | The number of packets received over the serial interface while running SLIP. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.28 | ScalarslipInOctets | read-only | mandatory | The number of octets received over the serial interface while running SLIP. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.29 | ScalarslipInErrs | read-only | mandatory | The number of errors encountered on received octets on the serial interface while running SLIP. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.30 | ScalarslipOutPackets | read-only | mandatory | The number of packets transmitted over the serial interface while running SLIP. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.31 | ScalarslipOutOctets | read-only | mandatory | The number of octets transmitted over the serial interface while running SLIP. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.32 | ScalarslipOutErrors | read-only | mandatory | The number of errors encountered while transmitting over the serial interface while running SLIP. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.33 | ScalaretherInAlignErrors | read-only | mandatory | The number of packets received on the Ethernet interface that were not an integral number of octets in length. |
| 1.3.6.1.4.1.11.2.3.9.3.1.4.34 | ScalaretherInCollisions | read-only | mandatory | The number of collisions detected on the Ethernet interface that were after the start of the normal packet. |
| 1.3.6.1.4.1.11.2.3.9.3.1.5 | Nodepreferences | |||
| 1.3.6.1.4.1.11.2.3.9.3.1.5.1 | ScalarclientAuthentication | read-write | mandatory | Controls whether MIT-MAGIC-COOKIE authentication is used by the server during client connection. If enabled, the client must pass a valid MAGIC_COOKIE to the s… |
| 1.3.6.1.4.1.11.2.3.9.3.1.5.2 | ScalaraccessControls | read-write | mandatory | This determines whether host access controls are used by the server during client connection. If enabled, only those clients running on hosts listed in the ter… |
| 1.3.6.1.4.1.11.2.3.9.3.1.5.3 | Scalarr3BugCompatability | read-write | mandatory | This determines whether the server behaves like an X11R3 server for certain specific operations. |
| 1.3.6.1.4.1.11.2.3.9.3.1.6 | Nodereset | |||
| 1.3.6.1.4.1.11.2.3.9.3.1.6.1 | ScalarresetEnable | read-write | mandatory | This variable indicates whether remote (through SNMP) resets are allowed. |
| 1.3.6.1.4.1.11.2.3.9.3.1.6.2 | Scalarreboot | read-write | mandatory | Setting this variable to zero will cause the X terminal to reset. |
| 1.3.6.1.4.1.11.2.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.7 | Nodeicmp | |||
| 1.3.6.1.4.1.11.2.13 | Nodesnmp | |||
| 1.3.6.1.4.1.11.2.13.1 | Nodetrap | |||
| 1.3.6.1.4.1.11.2.13.2 | NodesnmpdConf |