HPE-EMBWEB-MIB
51 objects
This private MIB module adds MIBs to EMBWEB (Embedded Web Server).
Imported Objects
| HPE-MIB | nm |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.66 | IdentityrlEmbWeb | This private MIB module adds MIBs to EMBWEB (Embedded Web Server). | ||
| 1.3.6.1.4.1.11.2.66.1 | ScalarrlEmWebMibVersion | read-only | current | Embedded web version, the current version is 2. |
| 1.3.6.1.4.1.11.2.66.2 | ScalarrlEmWebWebSite | read-write | current | Link for the vendor web site used to retrive information. |
| 1.3.6.1.4.1.11.2.66.3 | TablerlEmWebSecurityTable | not-accessible | current | Security Table whose entry is composed of username and Password, group and access privileges for each user. The access privileges can be one or more of none, r… |
| 1.3.6.1.4.1.11.2.66.3.1 | RowrlEmWebSecurityEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.11.2.66.3.1.1 | ColumnrlEmWebSecurityUserName | read-write | current | The User name. |
| 1.3.6.1.4.1.11.2.66.3.1.2 | ColumnrlEmWebSecurityPassword | read-write | current | The User password. |
| 1.3.6.1.4.1.11.2.66.3.1.3 | ColumnrlEmWebSecurityAccess | read-write | current | Access rights for this user . |
| 1.3.6.1.4.1.11.2.66.3.1.4 | ColumnrlEmWebSecurityIpAddr | read-write | current | IP Address to send the traps to.0 means doesn't want to receive traps. |
| 1.3.6.1.4.1.11.2.66.3.1.5 | ColumnrlEmWebSecurityPort | read-write | current | Port to send the traps to. |
| 1.3.6.1.4.1.11.2.66.3.1.6 | ColumnrlEmWebSecuritySnmpVersion | read-write | current | SNMP version supported by this user. For the agent use. |
| 1.3.6.1.4.1.11.2.66.3.1.7 | ColumnrlEmWebSecurityStatus | read-write | current | The status of the security table entry. It's used to delete an entry |
| 1.3.6.1.4.1.11.2.66.5 | ScalarrlEmWebCloseTimeout | read-write | current | This variable defines the maximum time period in seconds that a TCP connection can stay open without depending on the TCP timeout mechanism |
| 1.3.6.1.4.1.11.2.66.6 | ScalarrlEmWebReceiveTimeout | read-write | current | This variable defines the maximum time period in seconds that a TCP connection can wait for data which hasn't arrived |
| 1.3.6.1.4.1.11.2.66.7 | ScalarrlEmWebMaxIdleTimeout | read-write | current | This variable defines the maximum HTTP Idle time period in seconds for a TCP connection.If another request isn't made at this period, the connection is closed.… |
| 1.3.6.1.4.1.11.2.66.8 | ScalarrlEmWebSetEWSfilesStatus | read-write | current | This variable sets the status of the embedded Web Server files to either closed or opened. |
| 1.3.6.1.4.1.11.2.66.9 | ScalarrlEmbeddedWebApplied | read-only | current | Specifies if the device supports Embedded WEB: true - suppotrs false - does not support |
| 1.3.6.1.4.1.11.2.66.10 | ScalarrlEmWebHttpPort | read-write | current | Specifies the TCP port the embedded web uses for HTTP sessions. |
| 1.3.6.1.4.1.11.2.66.11 | ScalarrlEmWebHttpEnable | read-write | current | Enable/Disable HTTP sessions |
| 1.3.6.1.4.1.11.2.66.12 | ScalarrlEmWebHttpsPort | read-write | current | Specifies the TCP port the embedded web uses for HTTPS sessions. |
| 1.3.6.1.4.1.11.2.66.13 | ScalarrlEmWebHttpsEnable | read-write | current | Enable/Disable HTTPS sessions |
| 1.3.6.1.4.1.11.2.66.14 | ScalarrlEmWebCertificateCountryName | read-write | current | Value of country name field that will appear when a new certificate is generated. |
| 1.3.6.1.4.1.11.2.66.15 | ScalarrlEmWebCertificateStateOrProvinceName | read-write | current | Value of state or province name field that will appear when a new certificate is generated. |
| 1.3.6.1.4.1.11.2.66.16 | ScalarrlEmWebCertificateLocalityName | read-write | current | Value of locality field that will appear when a new certificate is generated. |
| 1.3.6.1.4.1.11.2.66.17 | ScalarrlEmWebCertificateOrganizationName | read-write | current | Value of organization field that will appear when a new certificate is generated. |
| 1.3.6.1.4.1.11.2.66.19 | ScalarrlEmWebCertificateCommonName | read-write | current | Value of common name field that will appear when a new certificate is generated. |
| 1.3.6.1.4.1.11.2.66.20 | ScalarrlEmWebCertificateRegenerate | read-write | current | Setting to a regenerateCertificate causes a new certifiacte to be generated and to be used for all new sessions. |
| 1.3.6.1.4.1.11.2.66.21 | ScalarrlEmWebRsaKeyLength | read-write | current | Setting the RSA key size that will be created when rlEmWebRegenerateCertificateAndKey will be set to regenerateCertificateAndKey. |
| 1.3.6.1.4.1.11.2.66.22 | ScalarrlEmWebDebug | read-write | current | MIB variable for setting debug information. |
| 1.3.6.1.4.1.11.2.66.23 | ScalarrlEmWebURL | read-only | current | The URL through which the EWS of this device can be accessed. |
| 1.3.6.1.4.1.11.2.66.24 | ScalarrlEmWebDisplayNonPresentEntities | read-only | current | This object indicates whether the EWS is required to display non-present entities (like non-present ports, IP addresses on non-present ports etc.) on it's scre… |
| 1.3.6.1.4.1.11.2.66.25 | ScalarrlEmWebCertificateExists | read-only | current | This object indicates whether a certificate has been generated. |
| 1.3.6.1.4.1.11.2.66.26 | ScalarrlEmWebHttpsActiveCertificateId | read-write | current | By setting this scalar https is notified that the certificate and key with this index should be used for new https sessions. Even if the certifcate or key does… |
| 1.3.6.1.4.1.11.2.66.27 | ScalarrlEmWebExtraPort | read-write | current | Specifies the TCP port the embedded web uses for The Extra Port sessions. |
| 1.3.6.1.4.1.11.2.66.28 | ScalarrlEmWebExtraPortType | read-write | current | Specifies the Extra Port Type HTTP/HTTPS for all sessions. |
| 1.3.6.1.4.1.11.2.66.29 | ScalarrlEmWebMaxHttpsIdleTimeout | read-write | current | This variable defines the maximum HTTPS Idle time period in seconds for a web connection.If another request isn't made at this period, the connection is closed… |
| 1.3.6.1.4.1.11.2.66.30 | TablerlEmWebServiceTable | not-accessible | current | . |
| 1.3.6.1.4.1.11.2.66.30.1 | RowrlEmWebServiceEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.11.2.66.30.1.1 | ColumnrlEmWebServiceId | not-accessible | current | The Service Id. |
| 1.3.6.1.4.1.11.2.66.30.1.2 | ColumnrlEmWebServiceName | read-only | current | Service name |
| 1.3.6.1.4.1.11.2.66.30.1.3 | ColumnrlEmWebServiceEnable | read-write | current | Indicates whether the service is enabled or not. if set to 'default' will the service to go back to its initialization default status. |
| 1.3.6.1.4.1.11.2.66.30.1.4 | ColumnrlEmWebServicePort | read-write | current | Indicates whether the TCP port on which service is listening. value 0 will set the service to it's default port |
| 1.3.6.1.4.1.11.2.66.30.1.5 | ColumnrlEmWebServiceMaxUsers | read-only | current | The maximal number of users for this service. |
| 1.3.6.1.4.1.11.2.66.30.1.6 | ColumnrlEmWebServiceProtocol | read-write | current | Indicates the protocol that the service operates on. Note that the general HTTP service can have only the http value and the general HTTPS service can have onl… |
| 1.3.6.1.4.1.11.2.66.30.1.7 | ColumnrlEmWebServiceCertificateId | read-write | current | Indicates the certificate used by the service if rlEmWebServiceProtocol is https. A value of 0 indicates that a certificate has not been assigned to this servi… |
| 1.3.6.1.4.1.11.2.66.30.1.8 | ColumnrlEmWebServiceMaxIdleTimeOut | read-write | current | This variable defines the maximum Idle time period in seconds for a TCP connection. If another request isn't made at this period, the connection is closed. The… |
| 1.3.6.1.4.1.11.2.66.30.1.9 | ColumnrlEmWebServiceMaxHardTimeOut | read-write | current | A user connected to the device via an HTTP session is automatically logged out after this amount of time (in seconds) regardless of the amount of HTTP activity… |
| 1.3.6.1.4.1.11.2.66.31 | ScalarrlEmWebMaxHardTimeout | read-write | current | A user connected to the device via an HTTP session is automatically logged out after this amount of time regardless of the amount of HTTP activity. Maximal val… |
| 1.3.6.1.4.1.11.2.66.32 | ScalarrlEmWebMaxHttpsHardTimeout | read-write | current | A user connected to the device via an HTTPS session is automatically logged out after this amount of time regardless of the amount of HTTPS activity. Maximal v… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RlEmbWebEnabled | INTEGER { default(1), false(2), true(3) } | current | Embedde Web Service Support Enabled/Disabled |
| RlEmbWebProtocol | INTEGER { default(1), http(2), https(3) } | current | Embedde Web Protocol |