HPE-IPv6
152 objects
The private MIB module definition for IPv6 MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.19 | TablerlIpAddressTable | not-accessible | current | This table is parallel to ipAddressTable, and is used to add/delete IPv6 entries to/from that table. It contains private objects. |
| 1.3.6.1.4.1.11.2.26.19.1 | RowrlIpAddressEntry | not-accessible | current | An address mapping for a particular interface. |
| 1.3.6.1.4.1.11.2.26.19.1.1 | ColumnrlIpAddressPrefixLength | read-create | current | The prefix length of this address. |
| 1.3.6.1.4.1.11.2.26.19.1.2 | ColumnrlIpAddressType | read-only | current | Extend standard field ipAddressType to multicast |
| 1.3.6.1.4.1.11.2.26.20 | Tablerlipv6InterfaceTable | not-accessible | current | This table is parallel to ipv6InterfaceTable, and is used to configure additional interface parameters. |
| 1.3.6.1.4.1.11.2.26.20.1 | Rowrlipv6InterfaceEntry | not-accessible | current | Additional configuration parameters for a particular interface. |
| 1.3.6.1.4.1.11.2.26.20.1.1 | Columnrlipv6InterfaceNdDadAttemps | read-create | current | ND Duplicated address detection number of attempts. |
| 1.3.6.1.4.1.11.2.26.20.1.2 | Columnrlipv6InterfaceAutoconfigEnable | read-create | current | Enables or disables Stateless Address Auto configuration on specific interface. |
| 1.3.6.1.4.1.11.2.26.20.1.3 | Columnrlipv6InterfaceIcmpUnreachSendEnable | read-create | current | Enables or disables sending of ICMP Destination Unreachable Error on specific interface. |
| 1.3.6.1.4.1.11.2.26.20.1.4 | Columnrlipv6InterfaceLinkMTU | read-create | current | The maximum transmission unit (MTU) size of IPv6 packets sent on an interface in bytes. |
| 1.3.6.1.4.1.11.2.26.20.1.5 | Columnrlipv6InterfaceMLDVersion | read-create | current | Set version of MLD protocol on specific interface. |
| 1.3.6.1.4.1.11.2.26.20.1.6 | Columnrlipv6InterfaceRetransmitTime | read-create | current | This value will be included in all IPv6 router advertisements sent out this interface. Very short intervals are not recommended in normal IPv6 operation. When … |
| 1.3.6.1.4.1.11.2.26.20.1.7 | Columnrlipv6InterfaceIcmpRedirectSendEnable | read-create | current | Enables or disables sending of ICMP IPv6 redirect messages to re-send a packet through the same interface on which the packet was received. |
| 1.3.6.1.4.1.11.2.26.21 | TablerlinetCidrRouteTable | not-accessible | current | This table is parallel to inetCidrRouteTable, and is used to configure or display additional route parameters. |
| 1.3.6.1.4.1.11.2.26.21.1 | RowrlinetCidrRouteEntry | not-accessible | current | Additional parameters for a particular route. |
| 1.3.6.1.4.1.11.2.26.21.1.1 | ColumnrlinetCidrRouteLifetime | read-only | current | The remaining length of time, in seconds, that this route will continue to be valid, i.e., time until deprecation. A value of 4,294,967,295 represents infinity. |
| 1.3.6.1.4.1.11.2.26.21.1.2 | ColumnrlinetCidrRouteInfo | read-only | current | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.4.1.11.2.26.22 | TablerlipNetToPhysicalTable | not-accessible | current | This table is parallel to ipNetToPhysicalTable, and is used to configure or display additional neighbor parameters. |
| 1.3.6.1.4.1.11.2.26.22.1 | RowrlipNetToPhysicalEntry | not-accessible | current | Additional parameters for a neighbor |
| 1.3.6.1.4.1.11.2.26.22.1.1 | ColumnrlipNetToPhysicalIsRouter | read-only | current | This object has the value 'true(1)', if the neighbor is router; otherwise, the value is 'false(2)'. |
| 1.3.6.1.4.1.11.2.26.22.1.2 | ColumnrlipNetToPhysicalReachableConfirmed | read-only | current | Time (in seconds) since the address was confirmed to be reachable. Only, relevant for dynamic entries. |
| 1.3.6.1.4.1.11.2.26.28 | TablerlInetStaticRouteTable | not-accessible | current | This entity's static (user configured) Inet Routing table. Entries are MAX-ACCESSible even if not used for forwarding |
| 1.3.6.1.4.1.11.2.26.28.1 | RowrlInetStaticRouteEntry | not-accessible | current | A particular Static(user configured) route to a particular destination. |
| 1.3.6.1.4.1.11.2.26.28.1.1 | ColumnrlInetStaticRouteDestType | read-only | current | The type of the address used as the destination internetwork address or subnet address. |
| 1.3.6.1.4.1.11.2.26.28.1.2 | ColumnrlInetStaticRouteDest | not-accessible | current | Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determi… |
| 1.3.6.1.4.1.11.2.26.28.1.3 | ColumnrlInetStaticRoutePfxLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the rlInetSt… |
| 1.3.6.1.4.1.11.2.26.28.1.4 | ColumnrlInetStaticRouteNextHopType | not-accessible | current | The type of the address used as the next-hop address for this route. |
| 1.3.6.1.4.1.11.2.26.28.1.5 | ColumnrlInetStaticRouteNextHop | not-accessible | current | The next-hop IP address, if any. If rlInetStaticRouteAction is 'forward', there may or may not be a next-hop IP address. A next-hop IP address is not required … |
| 1.3.6.1.4.1.11.2.26.28.1.6 | ColumnrlInetStaticRouteIfIndex | not-accessible | current | The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scen… |
| 1.3.6.1.4.1.11.2.26.28.1.7 | ColumnrlInetStaticRoutePathCost | read-write | current | Path cost for this static route. |
| 1.3.6.1.4.1.11.2.26.28.1.8 | ColumnrlInetStaticRouteType | read-write | current | Same as inetCidrRouteType MIB (excluded 'other' route type) |
| 1.3.6.1.4.1.11.2.26.28.1.9 | ColumnrlInetStaticRouteOwner | read-only | current | Static - The route is configured over Static IP. This route is written to configuration files. Dhcp - The route is Configured by DHCP (received as part of DHCP… |
| 1.3.6.1.4.1.11.2.26.28.1.10 | ColumnrlInetStaticRouteRowStatus | read-write | current | The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). |
| 1.3.6.1.4.1.11.2.26.28.1.11 | ColumnrlInetStaticRouteForwardingStatus | read-only | current | active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. D… |
| 1.3.6.1.4.1.11.2.26.28.1.12 | ColumnrlInetStaticRouteTrackObject | read-write | current | Track object number |
| 1.3.6.1.4.1.11.2.26.28.1.13 | ColumnrlInetStaticRouteTrackStatus | read-only | current | Track status |
| 1.3.6.1.4.1.11.2.26.29 | TablerlInetRoutingDistanceTable | not-accessible | current | This table defines administrative distances for different protocol routes that are inserted into the routing table. |
| 1.3.6.1.4.1.11.2.26.29.1 | RowrlInetRoutingDistanceEntry | not-accessible | current | A set of distances per inet address type. |
| 1.3.6.1.4.1.11.2.26.29.1.1 | ColumnrlInetRoutingDistanceType | read-only | current | The inet address type for distance definitions set, either IPv4 or IPv6. |
| 1.3.6.1.4.1.11.2.26.29.1.2 | ColumnrlInetRoutingDistanceConnected | read-write | current | The administrative distance used for directly connected routes. |
| 1.3.6.1.4.1.11.2.26.29.1.3 | ColumnrlInetRoutingDistanceStatic | read-write | current | The administrative distance used for static routes. |
| 1.3.6.1.4.1.11.2.26.29.1.4 | ColumnrlInetRoutingDistanceRip | read-write | current | The administrative distance used for RIP routes. |
| 1.3.6.1.4.1.11.2.26.29.1.5 | ColumnrlInetRoutingDistanceOspfInternal | read-write | current | The administrative distance used for OSPF internal routes. |
| 1.3.6.1.4.1.11.2.26.29.1.6 | ColumnrlInetRoutingDistanceOspfExternal | read-write | current | The administrative distance used for OSPF Autonomous System external routes. |
| 1.3.6.1.4.1.11.2.26.30 | TablerlInternInetCidrRouteTable | not-accessible | current | Internal inetCidrRouteTable - this entity's IP Routing table. |
| 1.3.6.1.4.1.11.2.26.30.1 | RowrlInternInetCidrRouteEntry | not-accessible | current | A particular route to a particular destination, under a particular policy (as reflected in the rlInternInetCidrRoutePolicy object). Dynamically created rows wi… |
| 1.3.6.1.4.1.11.2.26.30.1.1 | ColumnrlInternInetCidrRouteDestType | not-accessible | current | The type of the rlInternInetCidrRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are a… |
| 1.3.6.1.4.1.11.2.26.30.1.2 | ColumnrlInternInetCidrRouteDest | not-accessible | current | The destination IP address of this route. The type of this address is determined by the value of the rlInternInetCidrRouteDestType object. The values for the i… |
| 1.3.6.1.4.1.11.2.26.30.1.3 | ColumnrlInternInetCidrRoutePfxLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the rlIntern… |
| 1.3.6.1.4.1.11.2.26.30.1.4 | ColumnrlInternInetCidrRoutePolicy | not-accessible | current | This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to th… |
| 1.3.6.1.4.1.11.2.26.30.1.5 | ColumnrlInternInetCidrRouteNextHopType | not-accessible | current | The type of the rlInternInetCidrRouteNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those ad… |
| 1.3.6.1.4.1.11.2.26.30.1.6 | ColumnrlInternInetCidrRouteNextHop | not-accessible | current | On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of … |
| 1.3.6.1.4.1.11.2.26.30.1.7 | ColumnrlInternInetCidrRouteIfIndex | not-accessible | current | The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scen… |
| 1.3.6.1.4.1.11.2.26.30.1.8 | ColumnrlInternInetCidrRouteType | read-only | current | The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.11.2.26.30.1.9 | ColumnrlInternInetCidrRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.11.2.26.30.1.10 | ColumnrlInternInetCidrRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied, except throu… |
| 1.3.6.1.4.1.11.2.26.30.1.11 | ColumnrlInternInetCidrRouteNextHopAS | read-only | current | The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's rlInternInetCidrRou… |
| 1.3.6.1.4.1.11.2.26.30.1.12 | ColumnrlInternInetCidrRouteMetric1 | read-only | current | The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rlInternInetCidrRouteP… |
| 1.3.6.1.4.1.11.2.26.30.1.13 | ColumnrlInternInetCidrRouteMetric2 | read-only | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rlInternInetCidrRoute… |
| 1.3.6.1.4.1.11.2.26.30.1.14 | ColumnrlInternInetCidrRouteMetric3 | read-only | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rlInternInetCidrRoute… |
| 1.3.6.1.4.1.11.2.26.30.1.15 | ColumnrlInternInetCidrRouteMetric4 | read-only | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rlInternInetCidrRoute… |
| 1.3.6.1.4.1.11.2.26.30.1.16 | ColumnrlInternInetCidrRouteMetric5 | read-only | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rlInternInetCidrRoute… |
| 1.3.6.1.4.1.11.2.26.30.1.17 | ColumnrlInternInetCidrRouteStatus | read-only | current | The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). |
| 1.3.6.1.4.1.11.2.26.30.1.18 | ColumnrlInternInetCidrRouteLifetime | read-only | current | The remaining length of time, in seconds, that this route will continue to be valid, i.e., time until deprecation. A value of 4,294,967,295 represents infinity. |
| 1.3.6.1.4.1.11.2.26.30.1.19 | ColumnrlInternInetCidrRouteInfo | read-only | current | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.4.1.11.2.26.31 | TablerlInternInetStaticRouteTable | not-accessible | current | This entity's static (user configured) Inet Routing table. Entries are MAX-ACCESSible even if not used for forwarding |
| 1.3.6.1.4.1.11.2.26.31.1 | RowrlInternInetStaticRouteEntry | not-accessible | current | A particular Static(user configured) route to a particular destination. |
| 1.3.6.1.4.1.11.2.26.31.1.1 | ColumnrlInternInetStaticRouteDestType | read-only | current | The type of the address used as the destination internetwork address or subnet address. |
| 1.3.6.1.4.1.11.2.26.31.1.2 | ColumnrlInternInetStaticRouteDest | not-accessible | current | Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determi… |
| 1.3.6.1.4.1.11.2.26.31.1.3 | ColumnrlInternInetStaticRoutePfxLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the rlIntern… |
| 1.3.6.1.4.1.11.2.26.31.1.4 | ColumnrlInternInetStaticRouteNextHopType | not-accessible | current | The type of the address used as the next-hop address for this route. |
| 1.3.6.1.4.1.11.2.26.31.1.5 | ColumnrlInternInetStaticRouteNextHop | not-accessible | current | The next-hop IP address, if any. If rlInternInetStaticRouteAction is 'forward', there may or may not be a next-hop IP address. A next-hop IP address is not req… |
| 1.3.6.1.4.1.11.2.26.31.1.6 | ColumnrlInternInetStaticRouteIfIndex | not-accessible | current | The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scen… |
| 1.3.6.1.4.1.11.2.26.31.1.7 | ColumnrlInternInetStaticRoutePathCost | read-write | current | Path cost for this static route. Value of 0 signs default value metric |
| 1.3.6.1.4.1.11.2.26.31.1.8 | ColumnrlInternInetStaticRouteType | read-write | current | Same as inetCidrRouteType MIB (excluded 'other' route type) |
| 1.3.6.1.4.1.11.2.26.31.1.9 | ColumnrlInternInetStaticRouteOwner | read-only | current | Static - The route is configured over Static IP. This route is written to configuration files. Dhcp - The route is Configured by DHCP (received as part of DHCP… |
| 1.3.6.1.4.1.11.2.26.31.1.10 | ColumnrlInternInetStaticRouteRowStatus | read-write | current | The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). |
| 1.3.6.1.4.1.11.2.26.31.1.11 | ColumnrlInternInetStaticRouteForwardingStatus | read-only | current | active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. D… |
| 1.3.6.1.4.1.11.2.129 | IdentityrlIPv6 | The private MIB module definition for IPv6 MIB. | ||
| 1.3.6.1.4.1.11.2.129.1 | Scalarrlipv6IcmpErrorRatelimitInterval | read-write | current | The time interval between tokens being placed in the bucket, each token represents a single ICMP error message. The interval measured in milliseconds. |
| 1.3.6.1.4.1.11.2.129.2 | Scalarrlipv6IcmpErrorRatelimitBucketSize | read-write | current | The maximum number of tokens stored in the bucket, each token represents a single ICMP error message. |
| 1.3.6.1.4.1.11.2.129.3 | Scalarrlipv6LLDefaultZone | read-write | current | The interface which would be used as the egress interface for packets sent without a specified IPv6Z interface identifier or with the default '0' identifier. Z… |
| 1.3.6.1.4.1.11.2.129.4 | TablerlIpv6GeneralPrefixTable | not-accessible | current | This table defines general prefix description, based on which a number of longer, more specific, prefixes can be defined. |
| 1.3.6.1.4.1.11.2.129.4.1 | RowrlIpv6GeneralPrefixEntry | not-accessible | current | Single entry in general prefix table. |
| 1.3.6.1.4.1.11.2.129.4.1.1 | ColumnrlIpv6GeneralPrefixName | not-accessible | current | The name assigned to the prefix. |
| 1.3.6.1.4.1.11.2.129.4.1.2 | ColumnrlIpv6GeneralPrefixInetAddrType | read-write | current | Prefix inet address type. Has to be IPv6. |
| 1.3.6.1.4.1.11.2.129.4.1.3 | ColumnrlIpv6GeneralPrefixInetAddr | read-write | current | The IPv6 network assigned to the general prefix. This argument must be in the form documented in RFC4293 where the address is specified in hexadecimal using 16… |
| 1.3.6.1.4.1.11.2.129.4.1.4 | ColumnrlIpv6GeneralPrefixInetAddrPrefixLength | read-write | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the inet address before being compared to the value in the rlIpv6GeneralPr… |
| 1.3.6.1.4.1.11.2.129.4.1.5 | ColumnrlIpv6GeneralPrefixInterfaceId | read-write | current | Interface id to use when creating prefix based on point-to-point interface. |
| 1.3.6.1.4.1.11.2.129.4.1.6 | ColumnrlIpv6GeneralPrefixRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.11.2.129.5 | Scalarrlipv6MaximumHopsNumber | read-write | current | Maximum number of hops used in router advertisements and all IPv6 packets that are originated by the router. |
| 1.3.6.1.4.1.11.2.129.6 | TablerlIpv6RouterAdvertPrefixTable | not-accessible | current | This table defines IPv6 prefixes which are included in IPv6 Neighbor Discovery (ND) router advertisements. |
| 1.3.6.1.4.1.11.2.129.6.1 | RowrlIpv6RouterAdvertPrefixEntry | not-accessible | current | Single entry in Neighbor Discovery Prefix table. |
| 1.3.6.1.4.1.11.2.129.6.1.1 | ColumnrlIpv6RouterAdvertPrefixIfIndex | not-accessible | current | The index value that uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.11.2.129.6.1.2 | ColumnrlIpv6RouterAdvertPrefixIsDefault | not-accessible | current | Indicates whether this object belongs to 'default' entry. Default entry contains specifics about advertising prefixes which were created from local ipv6 addres… |
| 1.3.6.1.4.1.11.2.129.6.1.3 | ColumnrlIpv6RouterAdvertPrefixInetAddrType | not-accessible | current | Prefix inet address type. Has to be IPv6. |
| 1.3.6.1.4.1.11.2.129.6.1.4 | ColumnrlIpv6RouterAdvertPrefixInetAddr | not-accessible | current | The IPv6 network prefix to include in router advertisements. This argument must be in the form documented in RFC4293 where the address is specified in hexadeci… |
| 1.3.6.1.4.1.11.2.129.6.1.5 | ColumnrlIpv6RouterAdvertPrefixInetAddrPrefixLength | not-accessible | current | The length of the IPv6 prefix. A decimal value that indicates how many of the high-order contiguous bits of the address comprise the prefix (the network portio… |
| 1.3.6.1.4.1.11.2.129.6.1.6 | ColumnrlIpv6RouterAdvertPrefixAdminStatus | read-write | current | Admin status of the entry. Relevant only for default entry. |
| 1.3.6.1.4.1.11.2.129.6.1.7 | ColumnrlIpv6RouterAdvertPrefixAdvertise | read-write | current | Whether the prefix is included in router advertisements. |
| 1.3.6.1.4.1.11.2.129.6.1.8 | ColumnrlIpv6RouterAdvertPrefixOnLinkStatus | read-write | current | If object has the value 'onlink(1)', this prefix is confidered as on-link. This prefix will be advertised with the L-bit set and will be present in the Routing… |
| 1.3.6.1.4.1.11.2.129.6.1.9 | ColumnrlIpv6RouterAdvertPrefixAutonomousFlag | read-write | current | If object has the value 'true(1)', this prefix indicates to hosts on the local link that the specified prefix can be used for IPv6 autoconfiguration. The prefi… |
| 1.3.6.1.4.1.11.2.129.6.1.10 | ColumnrlIpv6RouterAdvertPrefixAdvPreferredLifetime | read-write | current | The amount of time (in seconds) that the specified IPv6 prefix is advertised as being preferred. |
| 1.3.6.1.4.1.11.2.129.6.1.11 | ColumnrlIpv6RouterAdvertPrefixAdvValidLifetime | read-write | current | The amount of time (in seconds) that the specified IPv6 prefix is advertised as being valid. |
| 1.3.6.1.4.1.11.2.129.6.1.12 | ColumnrlIpv6RouterAdvertPrefixRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.11.2.129.7 | TablerlIpv6RouterAdvertTable | not-accessible | current | This table is parallel to inetCidrRouteTable, and is used to configure or display additional route parameters. |
| 1.3.6.1.4.1.11.2.129.7.1 | RowrlIpv6RouterAdvertEntry | not-accessible | current | Additional parameters for a particular route. |
| 1.3.6.1.4.1.11.2.129.7.1.1 | ColumnrlIpv6RouterAdvertAdvIntervalOption | read-write | current | Indicates to a visiting mobile node the interval at which that node may expect to receive RAs. The node may use this information in its movement detection algo… |
| 1.3.6.1.4.1.11.2.129.7.1.2 | ColumnrlIpv6RouterAdvertRouterPreference | read-create | current | Configures a default router preference (DRP) for the router on a specific interface. |
| 1.3.6.1.4.1.11.2.129.7.1.3 | ColumnrlIpv6RouterAdvertIsCurHopLimitUserConfigured | read-write | current | Indicates that hop limit value used in router advertisement is an user configured value and not necessarily value that is used by router itself. |
| 1.3.6.1.4.1.11.2.129.8 | Scalarrlipv6InetCidrTableClear | read-write | current | This scalar indicates to clear all ipv6 routes from inetCidrTable. |
| 1.3.6.1.4.1.11.2.129.9 | TablerlIpv6PathMtuTable | not-accessible | current | This table used to represent all Path MTU changes to specific destination received from 'packet-too-big' messages. |
| 1.3.6.1.4.1.11.2.129.9.1 | RowrlIpv6PathMtuEntry | not-accessible | current | Single entry in Path MTU table. |
| 1.3.6.1.4.1.11.2.129.9.1.1 | ColumnrlIpv6PathMtuEntryInetDestAddrType | not-accessible | current | Prefix inet address type. Has to be IPv6. |
| 1.3.6.1.4.1.11.2.129.9.1.2 | ColumnrlIpv6PathMtuEntryInetDestAddr | not-accessible | current | The IPv6 destination address for which packet-too-big message was received. This argument must be in the form documented in RFC4293 where the address is specif… |
| 1.3.6.1.4.1.11.2.129.9.1.3 | ColumnrlIpv6PathMtuEntryMtu | read-only | current | The MTU value that was received in packet-too-bug message for specific destination. |
| 1.3.6.1.4.1.11.2.129.9.1.4 | ColumnrlIpv6PathMtuEntryAge | read-only | current | This entry's age (seconds) |
| 1.3.6.1.4.1.11.2.129.10 | TablerlIpNetToPhysicalTableClearTable | not-accessible | current | This entity is used to clear all or specific-type entries from ipNetToPhysicalTable. |
| 1.3.6.1.4.1.11.2.129.10.1 | RowrlIpNetToPhysicalTableClearEntry | not-accessible | current | A particular entry in this table. |
| 1.3.6.1.4.1.11.2.129.10.1.1 | ColumnrlIpNetToPhysicalTableClearIfIndex | not-accessible | current | Interface index of to clear or zero in case of whole table. |
| 1.3.6.1.4.1.11.2.129.10.1.2 | ColumnrlIpNetToPhysicalTableClearScope | read-write | current | Scope of the action - type of entries to delete. |
| 1.3.6.1.4.1.11.2.129.11 | TablerlIpv6HostForwardingTable | not-accessible | current | This entity's IPv6 host forwarding table. |
| 1.3.6.1.4.1.11.2.129.11.1 | RowrlIpv6HostForwardingEntry | not-accessible | current | A particular Static(user configured) route to a particular destination. |
| 1.3.6.1.4.1.11.2.129.11.1.1 | ColumnrlIpv6HostForwardingDestType | read-only | current | The type of the address used as the destination internetwork address or subnet address. |
| 1.3.6.1.4.1.11.2.129.11.1.2 | ColumnrlIpv6HostForwardingDest | not-accessible | current | Destination internetwork address or subnet address. |
| 1.3.6.1.4.1.11.2.129.11.1.3 | ColumnrlIpv6HostForwardingPfxLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the rlIpv6Ho… |
| 1.3.6.1.4.1.11.2.129.11.1.4 | ColumnrlIpv6HostForwardingNextHopType | not-accessible | current | The type of the address used as the next-hop address for this route. |
| 1.3.6.1.4.1.11.2.129.11.1.5 | ColumnrlIpv6HostForwardingNextHop | not-accessible | current | The next-hop IP address, if any. A next-hop IP address is not required if an output interface index is specified (in other words, if rlIpv6HostForwardingIfInde… |
| 1.3.6.1.4.1.11.2.129.11.1.6 | ColumnrlIpv6HostForwardingIfIndex | not-accessible | current | The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scen… |
| 1.3.6.1.4.1.11.2.129.11.1.7 | ColumnrlIpv6HostForwardingType | not-accessible | current | Forwarding type |
| 1.3.6.1.4.1.11.2.129.11.1.8 | ColumnrlIpv6HostForwardingPathCost | read-only | current | Path cost for this route. |
| 1.3.6.1.4.1.11.2.129.12 | Scalarrlipv6EnabledByDefaultRemovedIfindex | read-write | current | the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE. If the MIB has non zero value the meaning is that ipv6 interface has removed … |
| 1.3.6.1.4.1.11.2.129.13 | ScalarrlManagementIpv6 | read-write | current | The system management IPv6 address which is kept between system mode changes |
| 1.3.6.1.4.1.11.2.129.14 | ScalarrlManagementIpv6Action | read-write | current | The system management IPv6 action: clear - delete all ipv6 interfaces from startup configuration database except rlManagementIpv6 |
| 1.3.6.1.4.1.11.2.129.15 | TablerlIpv6TunnelToIPv6DbTable | not-accessible | current | This entity's IPv6 Tunnel if/addr/prefix table. |
| 1.3.6.1.4.1.11.2.129.15.1 | RowrlIpv6TunnelToIPv6DbEntry | not-accessible | current | A particular tunnel configured data to IPv6 db. |
| 1.3.6.1.4.1.11.2.129.15.1.1 | ColumnrlIpv6TunnelToIPv6IfIndex | not-accessible | current | IfIndex of tunnel interface |
| 1.3.6.1.4.1.11.2.129.15.1.2 | ColumnrlIpv6TunnelToIPv6Action | read-write | current | Action of the entry. All other fields relevant for appropriate actions. |
| 1.3.6.1.4.1.11.2.129.15.1.3 | ColumnrlIpv6TunnelToIPv6TunnelType | read-write | current | Tunnel type (manual/isatap/6to4/...). |
| 1.3.6.1.4.1.11.2.129.15.1.4 | ColumnrlIpv6TunnelToIPv6Address | read-write | current | The address used for this tunnel. Could be local IPv4 of the tunnel. |
| 1.3.6.1.4.1.11.2.129.15.1.5 | ColumnrlIpv6TunnelToIPv6PrefixLength | read-write | current | The address/prefix length used for above address if applicable. |
| 1.3.6.1.4.1.11.2.129.15.1.6 | ColumnrlIpv6TunnelToIPv6Mtu | read-write | current | Mtu of this interface. Used for host isatap tunnels |
| 1.3.6.1.4.1.11.2.129.15.1.7 | ColumnrlIpv6TunnelToIPv6MinRtrSolicitationInterval | read-write | current | Minimal router solicitation interval. Used for host isatap tunnels |
| 1.3.6.1.4.1.11.2.129.15.1.8 | ColumnrlIpv6TunnelToIPv6LinkLayerIPv4 | read-write | current | IPv4 address used for link-layer of ipv6 over ipv4 tunnel |
| 1.3.6.1.4.1.11.2.129.16 | ScalarrlIpv6DefaultTC | read-write | current | The default value inserted into the TC field of the IPv6 header of datagrams originated at this entity, whenever a TC value is not supplied by the application. |
| 1.3.6.1.4.1.11.2.129.17 | ScalarrlIpv6DefaultUP | read-write | current | The default value inserted into the User Priority field in the 802.1q VLAN tag of IPv4 frames sent by the CPU. |
| 1.3.6.1.4.1.11.2.129.18 | ScalarrlIpv6MtuSize | read-write | current | Sets the maximum transmission unit (MTU) size in bytes of IPv6 packets (payload). |
| 1.3.6.1.4.1.11.2.129.19 | TablerlInetStaticRouteAuxMappingTable | not-accessible | current | This entity's IPv6 auxulary mapping table. Serves to map nexthop ipv6 address to on-link prefix ifindex |
| 1.3.6.1.4.1.11.2.129.19.1 | RowrlInetStaticRouteAuxMappingEntry | not-accessible | current | An Auxulary Mapping table to find onlink prefix ifindex for ipv6 static route. |
| 1.3.6.1.4.1.11.2.129.19.1.1 | ColumnrlInetStaticRouteAuxMappingNextHopType | not-accessible | current | The type of the address used as the next-hop address for this route. |
| 1.3.6.1.4.1.11.2.129.19.1.2 | ColumnrlInetStaticRouteAuxMappingNextHop | not-accessible | current | The next-hop IP address |
| 1.3.6.1.4.1.11.2.129.19.1.3 | ColumnrlInetStaticRouteAuxMappingNextHopIfIndex | read-only | current | The ifIndex mapped to specified necthop address |