HPE-PHY-MIB
14 objects
The MIB module describes the private MIB for testing Layer1 interfaces supported by HPE's software and products.
Imported Objects
| HPE-MIB | nm |
| IF-MIB | ifIndex |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.90 | IdentityrlPhy | The MIB module describes the private MIB for testing Layer1 interfaces supported by HPE's software and products. | ||
| 1.3.6.1.4.1.11.2.90.1 | NoderlPhyTest | |||
| 1.3.6.1.4.1.11.2.90.1.1 | TablerlPhyTestSetTable | not-accessible | current | |
| 1.3.6.1.4.1.11.2.90.1.1.1 | RowrlPhyTestSetEntry | not-accessible | current | An entry containing objects for invoking tests on an interface. |
| 1.3.6.1.4.1.11.2.90.1.1.1.1 | ColumnrlPhyTestSetType | read-write | current | A control variable used to start operator initiated interface tests.1 indicates that no test has been initiated. Only operator initiated interface tests can be… |
| 1.3.6.1.4.1.11.2.90.1.2 | TablerlPhyTestGetTable | not-accessible | current | |
| 1.3.6.1.4.1.11.2.90.1.2.1 | RowrlPhyTestGetEntry | not-accessible | current | An entry containing results of tests on an interface. |
| 1.3.6.1.4.1.11.2.90.1.2.1.1 | ColumnrlPhyTestGetType | read-only | current | A control variable used to, 1 to indicate that this test can be done on the specified port, 2 to initiate the test whenever the user wishes |
| 1.3.6.1.4.1.11.2.90.1.2.1.2 | ColumnrlPhyTestGetStatus | read-only | current | This object contains the status of the most recently requested test for operator initiated tests or the value none(1) if no tests have been requested since the… |
| 1.3.6.1.4.1.11.2.90.1.2.1.3 | ColumnrlPhyTestGetResult | read-only | current | This object holds the test result |
| 1.3.6.1.4.1.11.2.90.1.2.1.4 | ColumnrlPhyTestGetUnits | read-only | current | The test result unit of measure. The units can be standard unit or special units that are designed for special test. The alaskaPhyLength unit is design for the… |
| 1.3.6.1.4.1.11.2.90.1.2.1.5 | ColumnrlPhyTestGetAlarm | read-only | current | This object hold the Alarm for this Entry. only Test that have can have alarms use this field, other holds the Value notRelevant(1) |
| 1.3.6.1.4.1.11.2.90.1.2.1.6 | ColumnrlPhyTestGetTimeStamp | read-only | current | The time in string (formated DD-MMM-YYYY HH:MM:SS e.g 14-Apr-2002 10:33:31) |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RlPhyTestType | INTEGER { rlPhyTestTableNoTest(1), rlPhyTestTableCableStatus(2), rlPhyTestTableCableFault(3), rlPhyTestTableCableLength(4), rlPhyTestTableTransceiverTemp(5), rlPhyTestTableTransceiverSupply(6), rlPhyTestTableTxBias(7), rlPhyTestTableTxOutput(8), rlPhyTestTableRxOpticalPower(9), rlPhyTestTableDataReady(10), rlPhyTestTableLOS(11), rlPhyTestTableTxFault(12), rlPhyTestTableCableChannel1(13), rlPhyTestTableCableChannel2(14), rlPhyTestTableCableChannel3(15), rlPhyTestTableCableChannel4(16), rlPhyTestTableCablePolarity1(17), rlPhyTestTableCablePolarity2(18), rlPhyTestTableCablePolarity3(19), rlPhyTestTableCablePolarity4(20), rlPhyTestTableCablePairSkew1(21), rlPhyTestTableCablePairSkew2(22), rlPhyTestTableCablePairSkew3(23), rlPhyTestTableCablePairSkew4(24), rlPhyTestTableSFPEepromQualified(25) } | current | A value indicating the test to perform. |