HPE-POE-MIB
78 objects
Add a new field in the PoE MIB to indicate Max power allocation allowed
Imported Objects
| HPE-MIB | nm |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.108 | IdentityrlPoe | Add a new field in the PoE MIB to indicate Max power allocation allowed | ||
| 1.3.6.1.4.1.11.2.108.1 | TablerlPethPsePortTable | not-accessible | current | The table listing additional information for Power Over Ethernet ports. |
| 1.3.6.1.4.1.11.2.108.1.1 | RowrlPethPsePortEntry | not-accessible | current | An entry in the rlPethPsePortTable. |
| 1.3.6.1.4.1.11.2.108.1.1.1 | ColumnrlPethPsePortGroupIndex | not-accessible | current | This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and … |
| 1.3.6.1.4.1.11.2.108.1.1.2 | ColumnrlPethPsePortIndex | not-accessible | current | This variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected. |
| 1.3.6.1.4.1.11.2.108.1.1.3 | ColumnrlPethPsePortOutputVoltage | read-only | current | This variable indicates on the output voltage level in millivolts from rlPethPsePortIndex. |
| 1.3.6.1.4.1.11.2.108.1.1.4 | ColumnrlPethPsePortOutputCurrent | read-only | current | This variable indicates on the output current level in milliampere from rlPethPsePortIndex. |
| 1.3.6.1.4.1.11.2.108.1.1.5 | ColumnrlPethPsePortOutputPower | read-only | current | This variable indicates on the output power level in milliwatts from rlPethPsePortIndex. |
| 1.3.6.1.4.1.11.2.108.1.1.6 | ColumnrlPethPsePortPowerLimit | read-write | current | This variable indicates on the user configured power level in milli watts which is available from rlPethPsePortIndex. |
| 1.3.6.1.4.1.11.2.108.1.1.7 | ColumnrlPethPsePortStatus | read-only | current | This variable indicates on the hardware status of rlPethPsePortIndex. |
| 1.3.6.1.4.1.11.2.108.1.1.8 | ColumnrlPethPsePortStatusDescription | read-only | current | This variable indicates the description of the hardware status of rlPethPsePortIndex. |
| 1.3.6.1.4.1.11.2.108.1.1.9 | ColumnrlPethPsePortOperPowerLimit | read-only | current | This variable indicates the maximum power level in milli watts which is available from rlPethPsePortIndex. |
| 1.3.6.1.4.1.11.2.108.1.1.10 | ColumnrlPethPsePortTimeRangeName | read-write | current | This variable is used to bind PoE port to time range. |
| 1.3.6.1.4.1.11.2.108.1.1.11 | ColumnrlPethPsePortOperStatus | read-only | current | This Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status. |
| 1.3.6.1.4.1.11.2.108.1.1.12 | ColumnrlPethPsePortMaxPowerAllocAllowed | read-only | current | This variable indicates the maximum power allocation allowed per port (including wire power loses) in milli-watts which is available from rlPethPsePortIndex. |
| 1.3.6.1.4.1.11.2.108.1.1.13 | ColumnrlPethPsePortSupportPoeType | read-only | current | This variable indicates the supported type of the PoE port |
| 1.3.6.1.4.1.11.2.108.1.1.14 | ColumnrlPethPsePortLinkPartnerPoeType | read-only | current | This variable indicates the link partner PoE type. |
| 1.3.6.1.4.1.11.2.108.1.1.15 | ColumnrlPethPsePortFourPairForced | read-write | current | This variable enabled the spare pair ALT_B in 60W port to force 4 pair enable. |
| 1.3.6.1.4.1.11.2.108.1.1.16 | ColumnrlPethPsePortFourPairEnabled | read-only | current | This variable indicates that spare pair ALT_B is enable. |
| 1.3.6.1.4.1.11.2.108.1.1.17 | ColumnrlPethPsePortNegotiationAllocatedPower | read-only | current | This variable indicates the power allocation in milli watts from power negotiation |
| 1.3.6.1.4.1.11.2.108.1.1.18 | ColumnrlPethPsePortNegotiationProtocolOwner | read-only | current | This variable indicates the protocol owner on power management negotiation protocol |
| 1.3.6.1.4.1.11.2.108.1.1.19 | ColumnrlPethPsePortLegacySupport | read-write | current | This variable identifies poe Legacy per port configuration mode |
| 1.3.6.1.4.1.11.2.108.1.1.20 | ColumnrlPethPsePortHighPowerModeEnable | read-write | current | This variable identifies poe port high power configuration mode |
| 1.3.6.1.4.1.11.2.108.1.1.21 | ColumnrlPethPsePortMenagementMode | read-write | current | This variable identifies poe power management mode configuration mode |
| 1.3.6.1.4.1.11.2.108.1.1.22 | ColumnrlPethPsePortStaticPowerAllocation | read-only | current | This variable indicates PoE Static power allocation. Static power allocation can be configured by setting rlPethPsePortMenagementMode |
| 1.3.6.1.4.1.11.2.108.1.1.23 | ColumnrlPethPsePortHighPowerOpStatus | read-only | current | This variable identifies the poe port high power status |
| 1.3.6.1.4.1.11.2.108.1.1.24 | ColumnrlPethPsePortClassLimit | read-write | current | This variable indicates class limit for the port |
| 1.3.6.1.4.1.11.2.108.2 | TablerlPethMainPseTable | not-accessible | current | The table listing additional read - only information for Power Over Ethernet. |
| 1.3.6.1.4.1.11.2.108.2.1 | RowrlPethMainPseEntry | not-accessible | current | An entry in the rlPethMainPseTable. |
| 1.3.6.1.4.1.11.2.108.2.1.1 | ColumnrlPethMainPseGroupIndex | not-accessible | current | This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and … |
| 1.3.6.1.4.1.11.2.108.2.1.2 | ColumnrlPethMainPseSwVersion | read-only | current | This variable identifies the MCU SW version. |
| 1.3.6.1.4.1.11.2.108.2.1.3 | ColumnrlPethMainPseHwVersion | read-only | obsolete | This variable identifies the MCU HW version. |
| 1.3.6.1.4.1.11.2.108.2.1.4 | ColumnrlPethMainPseHwType | read-only | current | This variable identifies the MCU HW type (enhanced, plus, none). |
| 1.3.6.1.4.1.11.2.108.2.1.5 | ColumnrlPethMainPsePowerGuardBand | read-write | current | This variable identifies the guard band in [W] for not connecting additional ports. |
| 1.3.6.1.4.1.11.2.108.2.1.6 | ColumnrlPethMainPsePowerManagementMode | read-write | current | This variable identifies power management mode. |
| 1.3.6.1.4.1.11.2.108.2.1.7 | ColumnrlPethMainPsedisconnectMethod | read-write | current | This variable identifies disconnect method. |
| 1.3.6.1.4.1.11.2.108.2.1.8 | ColumnrlPethMainPseTemperatureSensor | read-only | current | This variable identifies the pd temperature sensor. 32767 (0x7FFF) represent N/A temperature |
| 1.3.6.1.4.1.11.2.108.2.1.9 | ColumnrlPethMainPseInrushTestEnabled | read-write | current | This variable identifies if HW inrush test will be disabled. by default HW inrush test is enabled. |
| 1.3.6.1.4.1.11.2.108.2.1.10 | ColumnrlPethMainPseLegacyDisabled | read-write | current | This variable identifies poe Legacy global configuration mode |
| 1.3.6.1.4.1.11.2.108.2.1.11 | ColumnrlPethMainBanksValues | read-only | current | This variable returns 16 power-banks of a specific switch |
| 1.3.6.1.4.1.11.2.108.2.1.12 | ColumnrlPethMainBanksActivePowerBank | read-only | current | This variable returns the active power-bank of a specific switch |
| 1.3.6.1.4.1.11.2.108.3 | TablerlPethPowerPseTable | not-accessible | current | The table listing additional read-write information for Power Over Ethernet - PSE side. |
| 1.3.6.1.4.1.11.2.108.3.1 | RowrlPethPowerPseEntry | not-accessible | current | An entry in the rlPethPowerPseTable. |
| 1.3.6.1.4.1.11.2.108.3.1.1 | ColumnrlPethPowerPseGroupIndex | not-accessible | current | This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and … |
| 1.3.6.1.4.1.11.2.108.3.1.2 | ColumnrlPethPowerPsePower | read-write | current | This variable identifies the maximum power in [W] supplied by PSE. |
| 1.3.6.1.4.1.11.2.108.3.1.3 | ColumnrlPethPowerPseRpsPower | read-write | current | This variable identifies the maximum power in [W] supplied by PSE + RPS. |
| 1.3.6.1.4.1.11.2.108.3.1.4 | ColumnrlPethPowerPsePowerManagementMode | read-write | current | This variable identifies power management mode. |
| 1.3.6.1.4.1.11.2.108.3.1.5 | ColumnrlPethPowerPsedisconnectMethod | read-write | current | This variable identifies disconnect method. |
| 1.3.6.1.4.1.11.2.108.3.1.6 | ColumnrlPethPowerPseTemperatureSensor | read-only | current | This variable identifies the pd temperature sensor. |
| 1.3.6.1.4.1.11.2.108.3.1.7 | ColumnrlPethPowerPseInrushTestEnabled | read-write | current | This variable identifies if HW inrush test will be disabled. by default HW inrush test is enabled. |
| 1.3.6.1.4.1.11.2.108.3.1.8 | ColumnrlPethPowerPseLegacyDisabled | read-write | current | This variable identifies poe Legacy global configuration mode |
| 1.3.6.1.4.1.11.2.108.3.1.9 | ColumnrlPethPowerBanksValues | read-only | current | This variable returns 16 power-banks of a specific switch |
| 1.3.6.1.4.1.11.2.108.3.1.10 | ColumnrlPethPowerBanksActivePowerBank | read-only | current | This variable returns the active power-bank of a specific switch |
| 1.3.6.1.4.1.11.2.108.4 | TablerlPethPdPortTable | not-accessible | current | The table listing additional read-write information for Power Over Ethernet - PD side. |
| 1.3.6.1.4.1.11.2.108.4.1 | RowrlPethPdPortEntry | not-accessible | current | An entry in the rlPethPdPortTable. |
| 1.3.6.1.4.1.11.2.108.4.1.1 | ColumnrlPethPdPortIndex | not-accessible | current | This variable uniquely identifies the power Ethernet PD port within group rlPethPdPortGroupIndex to which the power Ethernet PSE entry is connected. |
| 1.3.6.1.4.1.11.2.108.4.1.2 | ColumnrlPethPdPortSupportPoeType | read-only | current | This variable indicates the PoE type of the PD port (AF/AT/60W) |
| 1.3.6.1.4.1.11.2.108.4.1.3 | ColumnrlPethPdPortOperPoeType | read-only | current | This variable indicates the operational PoE status of the PD port |
| 1.3.6.1.4.1.11.2.108.4.1.4 | ColumnrlPethPdPortPowerRequest | read-only | current | This variable indicates the requested power the PD port request from the PSE in mili-Watts |
| 1.3.6.1.4.1.11.2.108.4.1.5 | ColumnrlPethPdPortPowerAvailable | read-only | current | This variable indicates the available power the PSE port offers to the PD port in mili-Watts |
| 1.3.6.1.4.1.11.2.108.4.1.6 | ColumnrlPethPdPortForcedMode | read-write | current | This variable indicates the powered PD port forced mode |
| 1.3.6.1.4.1.11.2.108.4.1.7 | ColumnrlPethPdPortNegotiationProtocolOwner | read-only | current | This variable indicates the protocol owner on power management negotiation protocol |
| 1.3.6.1.4.1.11.2.108.5 | TablerlPethPseUnitTable | not-accessible | current | The table listing additional read-write information for Power Over Ethernet unit capabilities. |
| 1.3.6.1.4.1.11.2.108.5.1 | RowrlPethPseUnitEntry | not-accessible | current | An entry in the rlPethPseUnitTable. |
| 1.3.6.1.4.1.11.2.108.5.1.1 | ColumnrlPethUnitIndex | not-accessible | current | This variable uniquely identifies the unit id. It means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, t… |
| 1.3.6.1.4.1.11.2.108.5.1.2 | ColumnrlPethUnitType | read-only | current | This variable identifies the unit type (PSE/PD/Both/None). |
| 1.3.6.1.4.1.11.2.108.5.1.3 | ColumnrlPethUnitColor | read-only | current | This variable identifies the unit PSE status (color can be green,yellow,red). |
| 1.3.6.1.4.1.11.2.108.6 | ScalarrlPethPseCountersClear | read-write | current | Clear poe port counter. By setting the MIB to 0x0FFFFFFF, all poe ports counters are set to zero. by Setting to port index, all specific poe port counters are … |
| 1.3.6.1.4.1.11.2.108.8 | ScalarrlPoeClassErrorDetectionStatus | read-write | current | Specifies if class detection error is enabled (true) or disabled (false) |
| 1.3.6.1.4.1.11.2.108.9 | TablerlPethPerPseTable | not-accessible | current | The table listing additional information for Power Over Ethernet ports per PSE device. |
| 1.3.6.1.4.1.11.2.108.9.1 | RowrlPethPerPseEntry | not-accessible | current | An entry in the rlPethPerPseTable. |
| 1.3.6.1.4.1.11.2.108.9.1.1 | ColumnrlPethPerPseGroupIndex | not-accessible | current | This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and … |
| 1.3.6.1.4.1.11.2.108.9.1.2 | ColumnrlPethPerPseDeviceIndex | not-accessible | current | This variable uniquely identifies the PSE device within the group. |
| 1.3.6.1.4.1.11.2.108.9.1.3 | ColumnrlPethPerPseTemperatureValue | read-only | current | This variable represents temperature reported from PSE device. 32767 (0x7FFF) represent N/A temperature |
| 1.3.6.1.4.1.11.2.108.9.1.4 | ColumnrlPethPerPseHwRevision | read-only | current | This variable identifies the PSE HW revision. String '0x0' represent N/A HW revision. |
| 1.3.6.1.4.1.11.2.108.9.1.5 | ColumnrlPethPerPseVopStatus | read-only | current | Specifies status of VoP problem in PoE device |
| 1.3.6.1.4.1.11.2.108.10 | ScalarrlPethPsePortReactivate | read-write | current | Action MIB scalar. In case the ports in the port-list are disabled due to PoE HW error, the PoE mechanism will try to re-activate them. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RlPoeType | INTEGER { none(1), poe(2), poeplus(3), poe60w(4), poeBTtype3(5), poeBTtype4(6) } | current | PoE types: 1 - none: no PoE, unknown type; 2 - PoE: Standard AF PoE 3 - PoE Plus: Standard AT PoE 4 - 60 W: 60W poe port 5 - PoE BT-type3: 802.3BT standard, type 3 6 - PoE BT-type4: 802.3BT standard, type 4 |