MIB Viewer

HPE-QOS-CLI-MIB

403 objects
The private MIB module definition for Quality Of Service CLI in HPE devices.
Imported Objects
HPE-BRIDGEMIBOBJECTS-MIBVlanList1 VlanList2 VlanList3 VlanList4
HPE-MIBnm Percents
HPE-POLICY-MIBStatisticsClearActionType StatisticsDPType
IF-MIBInterfaceIndex InterfaceIndexOrZero
Q-BRIDGE-MIBPortList VlanId
SNMPv2-SMICounter32 Counter64 Gauge32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString RowPointer RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.11.2.88IdentityrlQosCliMibThe private MIB module definition for Quality Of Service CLI in HPE devices.
1.3.6.1.4.1.11.2.88.1ScalarrlQosCliQosModeread-writedeprecated*********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which mode the system will work: bas…
1.3.6.1.4.1.11.2.88.2ScalarrlQosCliBasicModeCfgread-writedeprecated*********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which trust mode the system will wor…
1.3.6.1.4.1.11.2.88.3ScalarrlQosMaxNumOfAceread-onlycurrentThis scalar define the max number of aces.
1.3.6.1.4.1.11.2.88.4TablerlQosOffsetTablenot-accessibledeprecatedThis table specifies Offset Table information
1.3.6.1.4.1.11.2.88.4.1RowrlQosOffsetEntrynot-accessibledeprecatedEach entry in this table describes one classifier field. The information includes: Offset Type the offset the mask and the Pattern. if the type is vlan then th…
1.3.6.1.4.1.11.2.88.4.1.1ColumnrlQosOffsetIndexnot-accessibledeprecatedAn arbitrary incremental Index for the offset table.
1.3.6.1.4.1.11.2.88.4.1.2ColumnrlQosOffsetTyperead-createdeprecatedStart of the offset.
1.3.6.1.4.1.11.2.88.4.1.3ColumnrlQosOffsetValueread-createdeprecatedThe Offset value.
1.3.6.1.4.1.11.2.88.4.1.4ColumnrlQosOffsetMaskread-createdeprecatedDefine which bit to be extracted from the offset.
1.3.6.1.4.1.11.2.88.4.1.5ColumnrlQosOffsetPatternread-createdeprecatedThe value to match too.
1.3.6.1.4.1.11.2.88.4.1.6ColumnrlQosOffsetTuplePointerread-createdeprecatedPointer for the relevant Tuple.
1.3.6.1.4.1.11.2.88.4.1.7ColumnrlQosOffsetStatusread-createdeprecatedThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.5TablerlQosTupleTablenot-accessiblecurrentThis table specifies Tuple Table information
1.3.6.1.4.1.11.2.88.5.1RowrlQosTupleEntrynot-accessiblecurrentEach entry in this table describes one Tuple. The information includes: Tuple Type and the Tuples values. The index is sequential integer represent by rlQosTup…
1.3.6.1.4.1.11.2.88.5.1.1ColumnrlQosTupleIndexnot-accessiblecurrentAn arbitrary incremental Index for the offset table.
1.3.6.1.4.1.11.2.88.5.1.2ColumnrlQosTupleTyperead-createcurrentStart of the offset.
1.3.6.1.4.1.11.2.88.5.1.3ColumnrlQosTupleValue1read-createcurrentThe Tuple no.1 value can be regular integer values only.
1.3.6.1.4.1.11.2.88.5.1.4ColumnrlQosTupleValue2read-createcurrentThe Tuple no.2 value can be IPv4/IPv6/MAC address or protocol number with mask
1.3.6.1.4.1.11.2.88.5.1.5ColumnrlQosTupleStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.6TablerlQosAceTablenot-accessiblecurrentThis table specifies ACE table information
1.3.6.1.4.1.11.2.88.6.1RowrlQosAceEntrynot-accessiblecurrentEach entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential…
1.3.6.1.4.1.11.2.88.6.1.1ColumnrlQosAceIndexnot-accessiblecurrentAn arbitrary incremental Index for the ACE table.
1.3.6.1.4.1.11.2.88.6.1.2ColumnrlQosAceActionread-createcurrentACE Action to take.
1.3.6.1.4.1.11.2.88.6.1.3ColumnrlQosAceTyperead-createcurrentACE Type
1.3.6.1.4.1.11.2.88.6.1.4ColumnrlQosAceTuple1read-createcurrentACE Tuple 1 pointer.
1.3.6.1.4.1.11.2.88.6.1.5ColumnrlQosAceTuple2read-createcurrentACE Tuple 1 pointer.
1.3.6.1.4.1.11.2.88.6.1.6ColumnrlQosAceTuple3read-createcurrentACE Tuple 1 pointer.
1.3.6.1.4.1.11.2.88.6.1.7ColumnrlQosAceTuple4read-createcurrentACE Tuple 1 pointer.
1.3.6.1.4.1.11.2.88.6.1.8ColumnrlQosAceTuple5read-createcurrentACE Tuple 1 pointer.
1.3.6.1.4.1.11.2.88.6.1.9ColumnrlQosAceTuple6read-createcurrentACE Tuple 1 pointer.
1.3.6.1.4.1.11.2.88.6.1.10ColumnrlQosAceTuple7read-createcurrentACE Tuple 1 pointer.
1.3.6.1.4.1.11.2.88.6.1.11ColumnrlQosAceTuple8read-createcurrentACE Tuple 1 pointer.
1.3.6.1.4.1.11.2.88.6.1.12ColumnrlQosAceAccountread-createcurrentACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE.
1.3.6.1.4.1.11.2.88.6.1.13ColumnrlQosAceStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.7TablerlQosAclTablenot-accessiblecurrentThis table specifies ACL table information
1.3.6.1.4.1.11.2.88.7.1RowrlQosAclEntrynot-accessiblecurrentEach entry in this table describes one Classifier Element. The information includes: Action and the row status. The ACE pointer are in the ACL-ACE reference ta…
1.3.6.1.4.1.11.2.88.7.1.1ColumnrlQosAclIndexnot-accessiblecurrentAn arbitrary incremental Index for the ACE table.
1.3.6.1.4.1.11.2.88.7.1.2ColumnrlQosAclNameread-createcurrentName ACL.
1.3.6.1.4.1.11.2.88.7.1.3ColumnrlQosAclTyperead-createcurrentACL Type.
1.3.6.1.4.1.11.2.88.7.1.4ColumnrlQosAclStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.7.1.5ColumnrlQosAclNumOfAcesread-onlycurrentHolds number of aces in the acl.
1.3.6.1.4.1.11.2.88.7.1.6ColumnrlQosAclIsBoundToInterfaceread-onlycurrentIndicates whether the ACL is bound to any interface or not.
1.3.6.1.4.1.11.2.88.8TablerlQosAclAceRefTablenot-accessiblecurrentThis table specifies the ACE to ACL relationship.
1.3.6.1.4.1.11.2.88.8.1RowrlQosAclAceRefEntrynot-accessiblecurrentEach entry in this table describes the relationship between ACE to ACL. Show which ACE include in one ACL. The index is the ACE pointer represent by rlQosAclAc…
1.3.6.1.4.1.11.2.88.8.1.1ColumnrlQosAclAceRefAcePointernot-accessiblecurrentThe Index is the ACE pointer
1.3.6.1.4.1.11.2.88.8.1.2ColumnrlQosAclAceRefAclPointerread-createcurrentACL index Pointer
1.3.6.1.4.1.11.2.88.8.1.3ColumnrlQosAclAceRefStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.9TablerlQosClassMapTablenot-accessiblecurrentThis table specifies CCL table information
1.3.6.1.4.1.11.2.88.9.1RowrlQosClassMapEntrynot-accessiblecurrentEach entry in this table describes one Class Map Element. The information includes: Classes Name,Class Action, Policer pointer, and 1 match statements. The ind…
1.3.6.1.4.1.11.2.88.9.1.1ColumnrlQosClassMapIndexnot-accessiblecurrentClass Map Index
1.3.6.1.4.1.11.2.88.9.1.2ColumnrlQosClassMapNameread-createcurrentName of the Class Map.
1.3.6.1.4.1.11.2.88.9.1.3ColumnrlQosClassMapTyperead-createcurrentClass map type
1.3.6.1.4.1.11.2.88.9.1.4ColumnrlQosClassMapActionread-createcurrentClass Map Action.
1.3.6.1.4.1.11.2.88.9.1.5ColumnrlQosClassMapMarkValueread-createcurrentMark value when mark action has been chosen in Class Map Action field.
1.3.6.1.4.1.11.2.88.9.1.6ColumnrlQosClassMapPolicerread-createcurrentPolicer pointer. 0-means no policer.
1.3.6.1.4.1.11.2.88.9.1.7ColumnrlQosClassMapMatch1read-createcurrentMatch ACL 1 pointer.
1.3.6.1.4.1.11.2.88.9.1.8ColumnrlQosClassMapMatch2read-createcurrentMatch ACL 2 pointer.
1.3.6.1.4.1.11.2.88.9.1.9ColumnrlQosClassMapMarkVlanread-createcurrentIf 'mark', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. If markNestedVlan, if the egress interface defi…
1.3.6.1.4.1.11.2.88.9.1.10ColumnrlQosClassMapNewVlanread-createcurrentIf rlQosClassMapMarkVlan is not 'noMark', than the classified traffic will be remarked with new VLAN id. The value of this field sets new VLAN id.
1.3.6.1.4.1.11.2.88.9.1.11ColumnrlQosClassMapRedirectActionread-createcurrentSpecifiy the redirection action.
1.3.6.1.4.1.11.2.88.9.1.12ColumnrlQosClassMapDestInterfaceread-createcurrentRelevant if rlQosClassMapRedirect is either 'redirectToInterface' or 'analyzerPort' or 'toMultipleInterfaces'. Specified the output interface the packet is red…
1.3.6.1.4.1.11.2.88.9.1.13ColumnrlQosClassMapStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.9.1.14ColumnrlQosClassMapMatch3read-createcurrentMatch ACL 3 pointer.
1.3.6.1.4.1.11.2.88.9.1.15ColumnrlQosClassMapTrapIdread-createcurrentIf now zero, Indicates the trap type id the matched packets arrives with, relevant when RedirectAction is trap or mirror.
1.3.6.1.4.1.11.2.88.9.1.16ColumnrlQosClassMapCounterEnableread-createcurrentEnable/disable counting per class map. Counts packets matche the class map rules.
1.3.6.1.4.1.11.2.88.9.1.17ColumnrlQosClassMapTunnelIdxread-createcurrentIf not zero, then the tunnel data pointed by rlQosClassMapTunnelIdx is added to the packet
1.3.6.1.4.1.11.2.88.10TablerlQosPolicerTablenot-accessiblecurrentThis table specifies All the Policers in the system Information
1.3.6.1.4.1.11.2.88.10.1RowrlQosPolicerEntrynot-accessiblecurrentEach entry in this table describes one policer. The information includes: Policer name, Policer type, Committed Rate, Committed Burst, Out-of-Profile Action. T…
1.3.6.1.4.1.11.2.88.10.1.1ColumnrlQosPolicerIndexnot-accessiblecurrentPolicer Index.
1.3.6.1.4.1.11.2.88.10.1.2ColumnrlQosPolicerNameread-createcurrentName of the Policer.
1.3.6.1.4.1.11.2.88.10.1.3ColumnrlQosPolicerTyperead-createcurrentPolicer type
1.3.6.1.4.1.11.2.88.10.1.4ColumnrlQosPolicerCirread-createcurrentCommitted rate value.
1.3.6.1.4.1.11.2.88.10.1.5ColumnrlQosPolicerCbsread-createcurrentCommitted burst Value.
1.3.6.1.4.1.11.2.88.10.1.6ColumnrlQosPolicerActionread-createcurrentOut of profile Action.
1.3.6.1.4.1.11.2.88.10.1.7ColumnrlQosPolicerCasPointerRemValread-createcurrentRemark value in case of explicit remark. The functionality as cascade pointer is obsolete.
1.3.6.1.4.1.11.2.88.10.1.8ColumnrlQosPolicerStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.10.1.9ColumnrlQosPolicerPirread-createcurrentPeak rate value. When both this and rlQosPolicerPbs are 0 this means the mode is Single Rate and when they are both non 0 this means the mode is Two Rate.
1.3.6.1.4.1.11.2.88.10.1.10ColumnrlQosPolicerPbsread-createcurrentPeak burst Value. When both this and rlQosPolicerPir are 0 this means the mode is Single Rate and when they are both non 0 this means the mode is Two Rate.
1.3.6.1.4.1.11.2.88.10.1.11ColumnrlQosPolicerPeakActionread-createcurrentOut of profile peak action.
1.3.6.1.4.1.11.2.88.11TablerlQosPolicyMapTablenot-accessiblecurrentThis table specifies Policy Map Table Information
1.3.6.1.4.1.11.2.88.11.1RowrlQosPolicyMapEntrynot-accessiblecurrentEach entry in this table describes one policy map. The information includes: Index, Policy Map name, Up to 6 class map names. The index is sequential integer r…
1.3.6.1.4.1.11.2.88.11.1.1ColumnrlQosPolicyMapIndexnot-accessiblecurrentPolicy map Index.
1.3.6.1.4.1.11.2.88.11.1.2ColumnrlQosPolicyMapNameread-createcurrentPolicy map Name.
1.3.6.1.4.1.11.2.88.11.1.3ColumnrlQosPolicyMapStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.11.1.4ColumnrlQosPolicyMapIsBoundToInterfaceread-onlycurrentIndicates whether the policy map is bound to any interface or not.
1.3.6.1.4.1.11.2.88.12TablerlQosPolicyClassRefTablenot-accessiblecurrentThis table specifies The relationship between policy map to class map
1.3.6.1.4.1.11.2.88.12.1RowrlQosPolicyClassRefEntrynot-accessiblecurrentEach entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPol…
1.3.6.1.4.1.11.2.88.12.1.1ColumnrlQosPolicyClassRefClassPointernot-accessiblecurrentThe Index is the Class-map pointer
1.3.6.1.4.1.11.2.88.12.1.2ColumnrlQosPolicyClassRefPolicyPointerread-createcurrentPolicy map index Pointer
1.3.6.1.4.1.11.2.88.12.1.3ColumnrlQosPolicyClassRefStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.13TablerlQosIfPolicyTablenot-accessiblecurrentThis table specifies for each interface the Policy Map attach to it
1.3.6.1.4.1.11.2.88.13.1RowrlQosIfPolicyEntrynot-accessiblecurrentEach entry in this table describes what policy Map attached to specific Interface. The index is Interface Index represent by rlIfIndex and the interface type r…
1.3.6.1.4.1.11.2.88.13.1.1ColumnrlIfIndexnot-accessiblecurrentInterface Index.
1.3.6.1.4.1.11.2.88.13.1.2ColumnrlIfTypenot-accessiblecurrentInterface Type(vlan/port).
1.3.6.1.4.1.11.2.88.13.1.3ColumnrlQosIfPolicyMapPointerInread-createcurrentPolicy map pointer Input.
1.3.6.1.4.1.11.2.88.13.1.4ColumnrlQosIfPolicyMapPointerOutread-createcurrentPolicy map pointer Output.
1.3.6.1.4.1.11.2.88.13.1.5ColumnrlQosIfTrustActiveread-createcurrentInterface Basic Mode Trust is active or not .
1.3.6.1.4.1.11.2.88.13.1.6ColumnrlQosPortShaperStatusread-createcurrentIf there is shaper on the port
1.3.6.1.4.1.11.2.88.13.1.7ColumnrlQosCirPortShaperread-createcurrentThe CIR for the port shaper. N/A when the shper is disabled
1.3.6.1.4.1.11.2.88.13.1.8ColumnrlQosCbsPortShaperread-createcurrentThe CBS for the port shaper. N/A when the shper is disabled
1.3.6.1.4.1.11.2.88.13.1.9ColumnrlQosIfProfilePointerread-createcurrentInterface Profile name pointer.
1.3.6.1.4.1.11.2.88.13.1.10ColumnrlQosQueueProfilePointerread-createcurrentQueue Profile name pointer.
1.3.6.1.4.1.11.2.88.13.1.11ColumnrlQosQueueShapeProfilePointerread-createcurrentQueue shape Profile pointer.
1.3.6.1.4.1.11.2.88.13.1.12ColumnrlQosAclDefaultActionread-createcurrentWhen one ACL is enterd then what to do for the last rull.
1.3.6.1.4.1.11.2.88.13.1.13ColumnrlQosIfPolicyMapStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.13.1.14ColumnrlQosIfAclInread-createcurrentIndex of an ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.
1.3.6.1.4.1.11.2.88.13.1.15ColumnrlQosIfAclOutread-createcurrentIndex of an ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.
1.3.6.1.4.1.11.2.88.13.1.16ColumnrlQosIfPolicerInread-createcurrentIndex of an Policer in the rlQosPolicerTable, which is applied to the ingress of an interface. 0 - means no Policer applied.
1.3.6.1.4.1.11.2.88.13.1.17ColumnrlQosPortRateLimitStatusread-createcurrentIf there is Rate limit on the port
1.3.6.1.4.1.11.2.88.13.1.18ColumnrlQosCirPortRateLimitread-createcurrentThe CIR for the port rate limit. N/A when the Rate limit is disabled
1.3.6.1.4.1.11.2.88.13.1.19ColumnrlQosCbsPortRateLimitread-createcurrentThe CBS for the port Rate limit. N/A when the Rate limit is disabled
1.3.6.1.4.1.11.2.88.13.1.20ColumnrlQosIfIpv6AclInread-createcurrentIndex of an IPv6 ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied.
1.3.6.1.4.1.11.2.88.13.1.21ColumnrlQosIfIpv6AclOutread-createcurrentIndex of an IPv6 ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied.
1.3.6.1.4.1.11.2.88.13.1.22ColumnrlQosAclDefaultActionOutread-createcurrentWhen one egress ACL is enterd then what to do for the last rull.
1.3.6.1.4.1.11.2.88.14TablerlQosIfProfileCfgTablenot-accessiblecurrentThis table specifies for each Queue the Tail Drop or WRED parameters and the EF of WRR parameters.
1.3.6.1.4.1.11.2.88.14.1RowrlQosIfProfileCfgEntrynot-accessiblecurrentEach entry in this table describes one queue parameters: Tail-drop threshold for drop precedence 0,1,3 and the WRED min-max threshold and the probability facto…
1.3.6.1.4.1.11.2.88.14.1.1ColumnrlIfProfileNamenot-accessiblecurrentInterface Index.
1.3.6.1.4.1.11.2.88.14.1.2ColumnrlQosQueueIdnot-accessiblecurrentQueue id Index.
1.3.6.1.4.1.11.2.88.14.1.3ColumnrlQosTdThersholdDp0read-createcurrentTail Drop Threshold for Drop Precedence 0.
1.3.6.1.4.1.11.2.88.14.1.4ColumnrlQosTdThersholdDp1read-createcurrentTail Drop Threshold for Drop Precedence 1.
1.3.6.1.4.1.11.2.88.14.1.5ColumnrlQosTdThersholdDp2read-createcurrentTail Drop Threshold for Drop Precedence 2.
1.3.6.1.4.1.11.2.88.14.1.6ColumnrlQosRedMinDp0read-createcurrentWRED Min Threshold for Drop Precedence 2.
1.3.6.1.4.1.11.2.88.14.1.7ColumnrlQosRedMaxDp0read-createcurrentWRED Max Threshold for Drop Precedence 0.
1.3.6.1.4.1.11.2.88.14.1.8ColumnrlQosRedProbDp0read-createcurrentWRED probability for Drop Precedence 0.
1.3.6.1.4.1.11.2.88.14.1.9ColumnrlQosRedMinDp1read-createcurrentWRED Min Threshold for Drop Precedence 2.
1.3.6.1.4.1.11.2.88.14.1.10ColumnrlQosRedMaxDp1read-createcurrentWRED Max Threshold for Drop Precedence 1.
1.3.6.1.4.1.11.2.88.14.1.11ColumnrlQosRedProbDp1read-createcurrentWRED probability for Drop Precedence 1.
1.3.6.1.4.1.11.2.88.14.1.12ColumnrlQosRedMinDp2read-createcurrentWRED Min Threshold for Drop Precedence 2.
1.3.6.1.4.1.11.2.88.14.1.13ColumnrlQosRedMaxDp2read-createcurrentWRED Max Threshold for Drop Precedence 2.
1.3.6.1.4.1.11.2.88.14.1.14ColumnrlQosRedProbDp2read-createcurrentWRED probability for Drop Precedence 2.
1.3.6.1.4.1.11.2.88.14.1.15ColumnrlQosRedQweightread-createcurrentQ factor for WRED.
1.3.6.1.4.1.11.2.88.14.1.16ColumnrlQosIfprofileStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.15TablerlQosDscpMutationTablenot-accessiblecurrentThis table specifies The DSCP Mutation table
1.3.6.1.4.1.11.2.88.15.1RowrlQosDscpMutationEntrynot-accessiblecurrentEach entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
1.3.6.1.4.1.11.2.88.15.1.1ColumnrlQosOldDscpnot-accessiblecurrentOld DSCP.
1.3.6.1.4.1.11.2.88.15.1.2ColumnrlQosNewDscpread-createcurrentNew DSCP.
1.3.6.1.4.1.11.2.88.16TablerlQosDscpRemarkTablenot-accessiblecurrentThis table specifies The DSCP Remark table
1.3.6.1.4.1.11.2.88.16.1RowrlQosDscpRemarkEntrynot-accessiblecurrentEach entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp
1.3.6.1.4.1.11.2.88.16.1.1ColumnrlQosRmOldDscpnot-accessiblecurrentOld DSCP.
1.3.6.1.4.1.11.2.88.16.1.2ColumnrlQosRmNewDscpread-createcurrentSpecifies new DSCP in the violation action.
1.3.6.1.4.1.11.2.88.16.1.3ColumnrlQosRmNewExceedDscpread-createcurrentSpecifies new DSCP in the exceed action.
1.3.6.1.4.1.11.2.88.17TablerlQosCosQueueTablenot-accessiblecurrentThis table specifies The Cos to queue map table
1.3.6.1.4.1.11.2.88.17.1RowrlQosCosQueueEntrynot-accessiblecurrentEach entry in this table describes queue ID. The index is CoS represent by rlQosCosIndex
1.3.6.1.4.1.11.2.88.17.1.1ColumnrlQosCosIndexnot-accessiblecurrentCoS value (0-7).
1.3.6.1.4.1.11.2.88.17.1.2ColumnrlQosCosQueueIdread-createcurrentQueue ID.
1.3.6.1.4.1.11.2.88.18TablerlQosDscpQueueTablenot-accessiblecurrentThis table specifies The DSCP to Queue map table
1.3.6.1.4.1.11.2.88.18.1RowrlQosDscpQueueEntrynot-accessiblecurrentEach entry in this table describes The Queue Number. The index is DSCP represent by rlQosDscpIndex
1.3.6.1.4.1.11.2.88.18.1.1ColumnrlQosDscpIndexnot-accessiblecurrentDSCP value.
1.3.6.1.4.1.11.2.88.18.1.2ColumnrlQosQueueNumread-createcurrentQueue Number.
1.3.6.1.4.1.11.2.88.19TablerlQosTcpPortQueueTablenot-accessiblecurrentThis table specifies TCP Port to Queue map table
1.3.6.1.4.1.11.2.88.19.1RowrlQosTcpPortQueueEntrynot-accessiblecurrentEach entry in this table describes The Queue Number. The index is TCP/UDP port represent by rlQosTcpUdpPort
1.3.6.1.4.1.11.2.88.19.1.1ColumnrlQosTcpPortnot-accessiblecurrentTCP port number.
1.3.6.1.4.1.11.2.88.19.1.2ColumnrlQosTcpQueueValueread-createcurrentQueue Number.
1.3.6.1.4.1.11.2.88.19.1.3ColumnrlQosTcpPortQueueStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.20TablerlQosUdpPortQueueTablenot-accessiblecurrentThis table specifies UDP Port to Queue map table
1.3.6.1.4.1.11.2.88.20.1RowrlQosUdpPortQueueEntrynot-accessiblecurrentEach entry in this table describes The Queue Number. The index is UDP port represent by rlQosTcpUdpPort
1.3.6.1.4.1.11.2.88.20.1.1ColumnrlQosUdpPortnot-accessiblecurrentUDP port number.
1.3.6.1.4.1.11.2.88.20.1.2ColumnrlQosUdpQueueValueread-createcurrentQueue value.
1.3.6.1.4.1.11.2.88.20.1.3ColumnrlQosUdpPortQueueStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.21TablerlQosEfManageTablenot-accessiblecurrentThis table specifies UDP Port to DSCP map table
1.3.6.1.4.1.11.2.88.21.1RowrlQosEfManageEntrynot-accessiblecurrentThis Table describes The EF management for the system. The index is UDP port represent by rlQosEfQueueId
1.3.6.1.4.1.11.2.88.21.1.1ColumnrlQosEfQueueIdnot-accessiblecurrentQueue-ID.
1.3.6.1.4.1.11.2.88.21.1.2ColumnrlQosEfStateread-createcurrentEnable/disable
1.3.6.1.4.1.11.2.88.21.1.3ColumnrlQosEfPriorityread-createcurrentThe priority of the queue
1.3.6.1.4.1.11.2.88.22TablerlQosQueueProfileTablenot-accessiblecurrentThis table describes the queue managment profiles
1.3.6.1.4.1.11.2.88.22.1RowrlQosQueueProfileEntrynot-accessiblecurrentEach entry in this table describes The queue managment profile Value. The index is profile name represent by rlQueueProfileName
1.3.6.1.4.1.11.2.88.22.1.1ColumnrlQueueProfileNamenot-accessiblecurrentProfile name for the Queue profile.
1.3.6.1.4.1.11.2.88.22.1.2ColumnrlQosTypeQueue1read-createcurrentEF or WRR
1.3.6.1.4.1.11.2.88.22.1.3ColumnrlQosValueQueue1read-createcurrentfor EF read-only for wrr the weight
1.3.6.1.4.1.11.2.88.22.1.4ColumnrlQosTypeQueue2read-createcurrentEF or WRR
1.3.6.1.4.1.11.2.88.22.1.5ColumnrlQosValueQueue2read-createcurrentfor EF read-only for wrr the weight
1.3.6.1.4.1.11.2.88.22.1.6ColumnrlQosTypeQueue3read-createcurrentEF or WRR
1.3.6.1.4.1.11.2.88.22.1.7ColumnrlQosValueQueue3read-createcurrentfor EF read-only for wrr the weight
1.3.6.1.4.1.11.2.88.22.1.8ColumnrlQosTypeQueue4read-createcurrentEF or WRR
1.3.6.1.4.1.11.2.88.22.1.9ColumnrlQosValueQueue4read-createcurrentfor EF read-only for wrr the weight
1.3.6.1.4.1.11.2.88.22.1.10ColumnrlQosTypeQueue5read-createcurrentEF or WRR
1.3.6.1.4.1.11.2.88.22.1.11ColumnrlQosValueQueue5read-createcurrentfor EF read-only for wrr the weight
1.3.6.1.4.1.11.2.88.22.1.12ColumnrlQosTypeQueue6read-createcurrentEF or WRR
1.3.6.1.4.1.11.2.88.22.1.13ColumnrlQosValueQueue6read-createcurrentfor EF read-only for wrr the weight
1.3.6.1.4.1.11.2.88.22.1.14ColumnrlQosTypeQueue7read-createcurrentEF or WRR
1.3.6.1.4.1.11.2.88.22.1.15ColumnrlQosValueQueue7read-createcurrentfor EF read-only for wrr the weight
1.3.6.1.4.1.11.2.88.22.1.16ColumnrlQosTypeQueue8read-createcurrentEF or WRR
1.3.6.1.4.1.11.2.88.22.1.17ColumnrlQosValueQueue8read-createcurrentfor EF read-only for wrr the weight
1.3.6.1.4.1.11.2.88.22.1.18ColumnrlQosQueueProfileStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.22.1.19ColumnrlQosNumOfIfConnectionsread-onlycurrenthow many time this entry connected to the if policy table
1.3.6.1.4.1.11.2.88.23TablerlQosQueueShapeProfileTablenot-accessiblecurrentThis table specifies the queue shaper profile
1.3.6.1.4.1.11.2.88.23.1RowrlQosQueueShapeProfileEntrynot-accessiblecurrentEach entry in this table describes The shaper profile for all queues. The index sequencial index represent by rlQosQueueShapeIndex
1.3.6.1.4.1.11.2.88.23.1.1ColumnrlQosQueueShapeIndexnot-accessiblecurrentProfile Index.
1.3.6.1.4.1.11.2.88.23.1.2ColumnrlQosCirQueue1read-createcurrentCIR for Queue1 0 for not active
1.3.6.1.4.1.11.2.88.23.1.3ColumnrlQosCbsQueue1read-createcurrentCBS for Queue1 0 for not active
1.3.6.1.4.1.11.2.88.23.1.4ColumnrlQosCirQueue2read-createcurrentCIR for Queue2 0 for not active
1.3.6.1.4.1.11.2.88.23.1.5ColumnrlQosCbsQueue2read-createcurrentCBS for Queue2 0 for not active
1.3.6.1.4.1.11.2.88.23.1.6ColumnrlQosCirQueue3read-createcurrentCIR for Queue3 0 for not active
1.3.6.1.4.1.11.2.88.23.1.7ColumnrlQosCbsQueue3read-createcurrentCBS for Queue3 0 for not active
1.3.6.1.4.1.11.2.88.23.1.8ColumnrlQosCirQueue4read-createcurrentCIR for Queue4 0 for not active
1.3.6.1.4.1.11.2.88.23.1.9ColumnrlQosCbsQueue4read-createcurrentCBS for Queue4 0 for not active
1.3.6.1.4.1.11.2.88.23.1.10ColumnrlQosCirQueue5read-createcurrentCIR for Queue5 0 for not active
1.3.6.1.4.1.11.2.88.23.1.11ColumnrlQosCbsQueue5read-createcurrentCBS for Queue5 0 for not active
1.3.6.1.4.1.11.2.88.23.1.12ColumnrlQosCirQueue6read-createcurrentCIR for Queue6 0 for not active
1.3.6.1.4.1.11.2.88.23.1.13ColumnrlQosCbsQueue6read-createcurrentCBS for Queue6 0 for not active
1.3.6.1.4.1.11.2.88.23.1.14ColumnrlQosCirQueue7read-createcurrentCIR for Queue7 0 for not active
1.3.6.1.4.1.11.2.88.23.1.15ColumnrlQosCbsQueue7read-createcurrentCBS for Queue7 0 for not active
1.3.6.1.4.1.11.2.88.23.1.16ColumnrlQosCirQueue8read-createcurrentCIR for Queue8 0 for not active
1.3.6.1.4.1.11.2.88.23.1.17ColumnrlQosCbsQueue8read-createcurrentCBS for Queue8 0 for not active
1.3.6.1.4.1.11.2.88.23.1.18ColumnrlQosQueueShapeProfileStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.24TablerlQosAclCounterTablenot-accessiblecurrentThe table is used to show statistics for ACL applied on an interface.
1.3.6.1.4.1.11.2.88.24.1RowrlQosAclCounterEntrynot-accessiblecurrentThis entry shows value of conter for a particular ACE of an ACL.
1.3.6.1.4.1.11.2.88.24.1.1ColumnrlQosAclCounterInterfaceread-onlycurrentInterface Index on which ACL is applied.
1.3.6.1.4.1.11.2.88.24.1.2ColumnrlQosAclCounterAclIndexread-onlycurrentIndex of ACL, which was applied on the IfIndex.
1.3.6.1.4.1.11.2.88.24.1.3ColumnrlQosAclCounterAceIndexread-onlycurrentIndex of ACE, which is belong to an ACL.
1.3.6.1.4.1.11.2.88.24.1.4ColumnrlQosAclCounterValueread-onlycurrentThe value of the ACE counter.
1.3.6.1.4.1.11.2.88.25TablerlQosFreeIndexesTablenot-accessiblecurrentThe table is used to get free indexes of tables to create new entries. The algorithm for free indexes depends on table's type: Tuple table - first free index. …
1.3.6.1.4.1.11.2.88.25.1RowrlQosFreeIndexesEntrynot-accessiblecurrentThe entry is used to get free index for particular table.
1.3.6.1.4.1.11.2.88.25.1.1ColumnrlQosFreeIndexesTableIdread-onlycurrentIdentification of the table, for which free index is retrieved.
1.3.6.1.4.1.11.2.88.25.1.2ColumnrlQosFreeIndexesValueread-onlycurrentFree index for table. 0 means no free entries.
1.3.6.1.4.1.11.2.88.26TablerlQosNamesToIndexesTablenot-accessiblecurrentThe table is used to get the ACL,Class-Map and Policy-Map indexes from the name.
1.3.6.1.4.1.11.2.88.26.1RowrlQosNamesToIndexesEntrynot-accessiblecurrentThe entry is used to get index form particular name and table type.
1.3.6.1.4.1.11.2.88.26.1.1ColumnrlQosNamesToIndexesTableIdnot-accessiblecurrentIdentification of the table, for which the index is retrieved.
1.3.6.1.4.1.11.2.88.26.1.2ColumnrlQosNamesToIndexesNamenot-accessiblecurrentThe name of the entry
1.3.6.1.4.1.11.2.88.26.1.3ColumnrlQosNamesToIndexesValueread-onlycurrentthe index for table
1.3.6.1.4.1.11.2.88.27ScalarrlQosStackControlQueueread-onlycurrentThis scalar object defines queue ID, which is used for stack control information transfer. For standalone systems the scalar value equals 0. This scalar object…
1.3.6.1.4.1.11.2.88.28ScalarrlQosStackControlCosread-onlycurrentThis scalar object defines CoS (VPT), which is used for stack control information transfer. For standalone systems the scalar value equals 8 (not valid for VPT…
1.3.6.1.4.1.11.2.88.29TablerlQosCosQueueDefaultMapTablenot-accessiblecurrentThe table is used to set default 802.1p map (vpt to queue)
1.3.6.1.4.1.11.2.88.29.1RowrlQosCosQueueDefaultMapEntrynot-accessiblecurrentThe entry is used to get index form particular name and table type.
1.3.6.1.4.1.11.2.88.29.1.1ColumnrlQosCosQueueDefaultMapVptread-onlycurrentvlan priority tag , 3 bits of priority which determine the service class.
1.3.6.1.4.1.11.2.88.29.1.2ColumnrlQosCosQueueDefaultMapQueueIdread-onlycurrentthe queue id vary from the first queue id to Max Number of queues supported
1.3.6.1.4.1.11.2.88.30TablerlQosPredefBlockAclTablenot-accessiblecurrentThe table is used apply predefined ACLs to interfaces. Predefined ACLs is ACL to filter particular protocol or protocol's family. These ACL may operate simulta…
1.3.6.1.4.1.11.2.88.30.1RowrlQosPredefBlockAclEntrynot-accessiblecurrentThe entry is used to apply predefined ACLs to the interface.
1.3.6.1.4.1.11.2.88.30.1.1ColumnrlQosPredefBlockAclIfIndexnot-accessiblecurrentIfIndex of port/trunk or VLAN tag of VLAN on which predefined ACLa will be configured.
1.3.6.1.4.1.11.2.88.30.1.2ColumnrlQosPredefBlockAclIfTypenot-accessiblecurrentInterface Type(vlan/port).
1.3.6.1.4.1.11.2.88.30.1.3ColumnrlQosPredefBlockAclMaskread-createcurrentThis bitmap defines predefined ACL which are applied on an interface. The table below defines bitmasks for supported predefined ACL. Protocol/Family bitmask De…
1.3.6.1.4.1.11.2.88.30.1.4ColumnrlQosPredefBlockAclStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.31TablerlQosAceTidxTablenot-accessiblecurrentThis table specifies ACE table with two index information
1.3.6.1.4.1.11.2.88.31.1RowrlQosAceTidxEntrynot-accessiblecurrentEach entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 11 tuples pointers. The index is sequentia…
1.3.6.1.4.1.11.2.88.31.1.1ColumnrlQosAceTidxAclIndexnot-accessiblecurrentAn arbitrary incremental Index for the ACL ACE connection.
1.3.6.1.4.1.11.2.88.31.1.2ColumnrlQosAceTidxIndexnot-accessiblecurrentAn arbitrary incremental Index for the ACE table.
1.3.6.1.4.1.11.2.88.31.1.3ColumnrlQosAceTidxActionread-createcurrentACE Action to take.
1.3.6.1.4.1.11.2.88.31.1.4ColumnrlQosAceTidxTyperead-createcurrentACE Type
1.3.6.1.4.1.11.2.88.31.1.5ColumnrlQosAceTidxTuple1read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.6ColumnrlQosAceTidxTuple2read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.7ColumnrlQosAceTidxTuple3read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.8ColumnrlQosAceTidxTuple4read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.9ColumnrlQosAceTidxTuple5read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.10ColumnrlQosAceTidxTuple6read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.11ColumnrlQosAceTidxTuple7read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.12ColumnrlQosAceTidxTuple8read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.13ColumnrlQosAceTidxAccountread-createcurrentACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE.
1.3.6.1.4.1.11.2.88.31.1.14ColumnrlQosAceTidxStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.31.1.15ColumnrlQosAceTidxTimeRangeread-createcurrentACE time range name.
1.3.6.1.4.1.11.2.88.31.1.16ColumnrlQosAceTidxTimeRangeIsActiveread-onlycurrentACE time range is rule active state shows is ACE currently active or not.
1.3.6.1.4.1.11.2.88.31.1.17ColumnrlQosAceTidxTuple9read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.18ColumnrlQosAceTidxTuple10read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.19ColumnrlQosAceTidxTuple11read-createcurrentACE Tuple pointer.
1.3.6.1.4.1.11.2.88.31.1.20ColumnrlQosAceTidxActionDropTyperead-createcurrentThis field is valid only if AceActionType is deny or deny-DisablePort.
1.3.6.1.4.1.11.2.88.32ScalarrlQosMibVersionread-onlycurrentMIB's version, the current version is 11 1 - original version 2 - Add new two MIB's items. - rlQosAceTidxTable - Ace table with two indexes - rlQosMibVersion. …
1.3.6.1.4.1.11.2.88.33TablerlQosDscpQueueDefaultMapTablenot-accessiblecurrentThe table is used to set default dscp to queue map
1.3.6.1.4.1.11.2.88.33.1RowrlQosDscpQueueDefaultMapEntrynot-accessiblecurrentThe entry is used to get index form particular name and table type.
1.3.6.1.4.1.11.2.88.33.1.1ColumnrlQosDscpQueueDefaultMapDscpread-onlycurrentdscp , 6 bits of priority which determine the service class.
1.3.6.1.4.1.11.2.88.33.1.2ColumnrlQosDscpQueueDefaultMapQueueIdread-onlycurrentthe queue id vary from the first queue id to Max Number of queues supported
1.3.6.1.4.1.11.2.88.34TablerlQosDscpToDpTablenot-accessiblecurrentThis table specifies The DSCP To Dp table
1.3.6.1.4.1.11.2.88.34.1RowrlQosDscpToDpEntrynot-accessiblecurrentEach entry in this table describes the new DP for the packet. The index is DSCP represent by rlQosDscp
1.3.6.1.4.1.11.2.88.34.1.1ColumnrlQosDscpnot-accessiblecurrentPacket DSCP.
1.3.6.1.4.1.11.2.88.34.1.2ColumnrlQosDpread-createcurrentNew DP.
1.3.6.1.4.1.11.2.88.35NoderlQosStatistics
1.3.6.1.4.1.11.2.88.35.1TablerlQosPortPolicyStatisticsTablenot-accessiblecurrentThis table specifies statistics counter for policies with specific actions
1.3.6.1.4.1.11.2.88.35.1.1RowrlQosPortPolicyStatisticsEntrynot-accessiblecurrentEach entry in this table describes counter per port. The index is port represent by rlIfIndex. In each entry represents counter, it's type , it's size and whet…
1.3.6.1.4.1.11.2.88.35.1.1.1ColumnrlQosPortPolicyStatisticsCntrTyperead-writecurrentCounter type.
1.3.6.1.4.1.11.2.88.35.1.1.2ColumnrlQosPortPolicyStatisticsCntrNumOfBitsread-onlycurrentCounter size in bits.
1.3.6.1.4.1.11.2.88.35.1.1.3ColumnrlQosPortPolicyStatisticsEnableCountingread-writecurrentIndication whether the counter is enabled.
1.3.6.1.4.1.11.2.88.35.1.1.4ColumnrlQosPortPolicyStatisticsCounterValueread-onlycurrentCounter value.
1.3.6.1.4.1.11.2.88.35.2TablerlQosSinglePolicerStatisticsTablenot-accessiblecurrentThis table specifies statistics counters per QoS meter
1.3.6.1.4.1.11.2.88.35.2.1RowrlQosSinglePolicerStatisticsEntrynot-accessiblecurrentEach entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each e…
1.3.6.1.4.1.11.2.88.35.2.1.1ColumnrlQosSinglePolicerStatisticsInProfileCounterValueread-onlycurrentCounter value of in profile traffic.
1.3.6.1.4.1.11.2.88.35.2.1.2ColumnrlQosSinglePolicerStatisticsInProfileCntrNumOfBitsread-onlycurrentCounter size in bits for in profile counter.
1.3.6.1.4.1.11.2.88.35.2.1.3ColumnrlQosSinglePolicerStatisticsOutProfileCounterValueread-onlycurrentCounter value of Out Profile traffic.
1.3.6.1.4.1.11.2.88.35.2.1.4ColumnrlQosSinglePolicerStatisticsOutProfileCntrNumOfBitsread-onlycurrentCounter size in bits for out profile counter.
1.3.6.1.4.1.11.2.88.35.2.1.5ColumnrlQosSinglePolicerStatisticsStatusread-writecurrentThe status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.11.2.88.35.3TablerlQosAggregatePolicerStatisticsTablenot-accessiblecurrentThis table specifies statistics counters per QoS aggregate meter
1.3.6.1.4.1.11.2.88.35.3.1RowrlQosAggregatePolicerStatisticsEntrynot-accessiblecurrentEach entry in this table describes counter per aggregate meter. The index is rlQosPolicerIndex. In each entry there are fields representing whether the counter…
1.3.6.1.4.1.11.2.88.35.3.1.1ColumnrlQosAggregatePolicerStatisticsInProfileCounterValueread-onlycurrentCounter value of In Profile amount of bytes.
1.3.6.1.4.1.11.2.88.35.3.1.2ColumnrlQosAggregatePolicerStatisticsInProfileCntrNumOfBitsread-onlycurrentCounter size in bits for In Profile .
1.3.6.1.4.1.11.2.88.35.3.1.3ColumnrlQosAggregatePolicerStatisticsOutProfileCounterValueread-onlycurrentCounter value of Out Profile amount of bytes.
1.3.6.1.4.1.11.2.88.35.3.1.4ColumnrlQosAggregatePolicerStatisticsOutProfileCntrNumOfBitsread-onlycurrentCounter size in bits for Out Profile.
1.3.6.1.4.1.11.2.88.35.3.1.5ColumnrlQosAggregatePolicerStatisticsStatusread-writecurrentThe status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.11.2.88.35.4TablerlQosOutQueueStatisticsTablenot-accessiblecurrentThis table specifies statistics counters per VLAN/Port/Queue/Drop Precedence
1.3.6.1.4.1.11.2.88.35.4.1RowrlQosOutQueueStatisticsEntrynot-accessiblecurrentEach entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'. The index is port r…
1.3.6.1.4.1.11.2.88.35.4.1.1ColumnrlQosOutQueueStatisticsCountrIDread-writecurrentCounter id, the key of the table.
1.3.6.1.4.1.11.2.88.35.4.1.2ColumnrlQosOutQueueStatisticsIfIndexListread-writecurrentPort for which the flow is counted.
1.3.6.1.4.1.11.2.88.35.4.1.3ColumnrlQosOutQueueStatisticsPortAllread-writecurrentIndication for whether the port is configured as range of all the ports
1.3.6.1.4.1.11.2.88.35.4.1.4ColumnrlQosOutQueueStatisticsVlanread-writecurrentVLAN for which the flow is counted.
1.3.6.1.4.1.11.2.88.35.4.1.5ColumnrlQosOutQueueStatisticsVlanAllread-writecurrentIndication for whether the VLAN is configured as range of all the VLANS
1.3.6.1.4.1.11.2.88.35.4.1.6ColumnrlQosOutQueueStatisticsQueueread-writecurrentQueue for which the flow is counted.
1.3.6.1.4.1.11.2.88.35.4.1.7ColumnrlQosOutQueueStatisticsQueueAllread-writecurrentIndication for whether the queue is configured as range of all the Queues
1.3.6.1.4.1.11.2.88.35.4.1.8ColumnrlQosOutQueueStatisticsDPread-writecurrentDrop Precedence for which the flow is counted.
1.3.6.1.4.1.11.2.88.35.4.1.9ColumnrlQosOutQueueStatisticsDPAllread-writecurrentIndication for whether the DP is configured as range of all the DPs
1.3.6.1.4.1.11.2.88.35.4.1.10ColumnrlQosOutQueueStatisticsCounterTailDropValueread-onlycurrentThe counter for tail dropped value.
1.3.6.1.4.1.11.2.88.35.4.1.11ColumnrlQosOutQueueStatisticsCounterAllValueread-onlycurrentThe counter for all traffic value.
1.3.6.1.4.1.11.2.88.35.4.1.12ColumnrlQosOutQueueStatisticsCntrNumOfBitsread-onlycurrentCounter size in bits for the counter.
1.3.6.1.4.1.11.2.88.35.4.1.13ColumnrlQosOutQueueStatisticsStatusread-writecurrentThe status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.11.2.88.35.5TablerlQosGlobalStatisticsCntrsTablenot-accessiblecurrentThis table specifies statistics global counters for specific rules for all ports that they are connected to
1.3.6.1.4.1.11.2.88.35.5.1RowrlQosGlobalStatisticsCntrsEntrynot-accessiblecurrentEach entry represents global counter.
1.3.6.1.4.1.11.2.88.35.5.1.1ColumnrlQosGlobalStatisticsCntrsTyperead-onlycurrentCounter type.
1.3.6.1.4.1.11.2.88.35.5.1.2ColumnrlQosGlobalStatisticsCntrsNumOfBitsread-onlycurrentCounter size in bits.
1.3.6.1.4.1.11.2.88.35.5.1.3ColumnrlQosGlobalStatisticsCntrsCounterValueread-onlycurrentCounter value.
1.3.6.1.4.1.11.2.88.35.5.1.4ColumnrlQosGlobalStatisticsStatusread-writecurrentThe status of a table entry. It is used to delete an entry from this table.
1.3.6.1.4.1.11.2.88.35.6ScalarrlQosClearCountersread-writecurrentThis scalar indicates to clear all the counters.
1.3.6.1.4.1.11.2.88.36NoderlQosClassifierUtilization
1.3.6.1.4.1.11.2.88.36.1TablerlQosClassifierUtilizationTablenot-accessiblecurrentA table containing Classifier utilization information. Each row represents objects for a particular Unit present in this system.
1.3.6.1.4.1.11.2.88.36.1.1RowrlQosClassifierUtilizationEntrynot-accessiblecurrentA Single entry containing Classifier utilization information.
1.3.6.1.4.1.11.2.88.36.1.1.1ColumnrlQosClassifierUtilizationUnitIdnot-accessiblecurrentThe Unit ID of this Classifier. must be unique per entry. This is an index into the table.
1.3.6.1.4.1.11.2.88.36.1.1.2ColumnrlQosClassifierUtilizationPercentread-onlycurrentThe classifier utilization percentage.
1.3.6.1.4.1.11.2.88.36.1.1.3ColumnrlQosClassifierUtilizationRulesNumberread-onlycurrentThe classifier utilization number of used rules, in short rules resolution.
1.3.6.1.4.1.11.2.88.36.1.1.4ColumnrlQosClassifierUtilizationFreeRulesNumberread-onlycurrentThe classifier utilization number of not used yet rules on the unit, in short rules resolution.
1.3.6.1.4.1.11.2.88.36.2ScalarrlQosClassifierUtilizationSystemread-onlycurrentThe system classifier utilization percentage.
1.3.6.1.4.1.11.2.88.36.3ScalarrlQosClassifierRulesNumberUtilizationSystemread-onlycurrentNumber of used rules per system, in short rule resolution
1.3.6.1.4.1.11.2.88.36.4ScalarrlQosClassifierFreeRulesNumUtilizationSystemread-onlycurrentNumber of free rules per system, in short rule resolution
1.3.6.1.4.1.11.2.88.36.5ScalarrlQosClassifierMaxRulesNumberUtilizationSystemread-onlycurrentMaximum number of rules per system, in short rule resolution
1.3.6.1.4.1.11.2.88.37TablerlQosPortToProfileMappingTablenot-accessiblecurrentThis table maps between port and profile
1.3.6.1.4.1.11.2.88.37.1RowrlQosPortToProfileMappingEntrynot-accessiblecurrentEach entry in this table describes mapping between port and profile
1.3.6.1.4.1.11.2.88.37.1.1ColumnrlQosPortnot-accessiblecurrentPort number
1.3.6.1.4.1.11.2.88.37.1.2ColumnrlQosProfileNameread-onlycurrentprofile
1.3.6.1.4.1.11.2.88.38ScalarrlQosCPUSafeGuardEnableread-writecurrentThis scalar enables/disables CPU Safeguard.
1.3.6.1.4.1.11.2.88.39TablerlQosPolicyClassPriorityRefTablenot-accessiblecurrentThis table specifies The relationship between policy map to class map
1.3.6.1.4.1.11.2.88.39.1RowrlQosPolicyClassPriorityRefEntrynot-accessiblecurrentEach entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPol…
1.3.6.1.4.1.11.2.88.39.1.1ColumnrlQosPolicyClassPriorityRefPrioritynot-accessiblecurrentThe class-map priority within the policy-map
1.3.6.1.4.1.11.2.88.39.1.2ColumnrlQosPolicyClassPriorityRefClassPointerread-createcurrentClass-map index Pointer
1.3.6.1.4.1.11.2.88.39.1.3ColumnrlQosPolicyClassPriorityRefPolicyPointerread-createcurrentPolicy map index Pointer
1.3.6.1.4.1.11.2.88.39.1.4ColumnrlQosPolicyClassPriorityRefStatusread-createcurrentThe status of a table entry. It is used to delete/Add an entry from this table.
1.3.6.1.4.1.11.2.88.42TablerlQosDenyAceStatisticsTablenot-accessiblecurrentThis table holds statistics for deny ACEs.
1.3.6.1.4.1.11.2.88.42.1RowrlQosDenyAceStatisticsEntrynot-accessiblecurrentEach entry in this table holds number of hits for deny ACEs attached to specific Interface.
1.3.6.1.4.1.11.2.88.42.1.1ColumnrlQosDenyAceStatisticsIfIndexnot-accessiblecurrentInterface Index.
1.3.6.1.4.1.11.2.88.42.1.2ColumnrlQosDenyAceStatisticsIfCounterread-onlycurrentNumber of hits on deny ACEs for this interface.
1.3.6.1.4.1.11.2.88.43ScalarrlQosDenyAceStatisticsOtherFlowCounterread-onlycurrentNumber of hits on deny ACEs for 'Other'-type flow.
1.3.6.1.4.1.11.2.88.44ScalarrlQosDenyAceStatisticsClearIfCountersread-writecurrentKeeps ifIndex a port or trunk or vlan that its hit counters should be reset. If the value is 0 then all interfaces counters must be reset.
1.3.6.1.4.1.11.2.88.45ScalarrlQosDenyAceStatisticsClearOtherFlowCounterread-writecurrentThis scalar indicates clearing 'Other'-type flow counter operation.
1.3.6.1.4.1.11.2.88.46TablerlQosModeGlobalCfgTablenot-accessiblecurrentThis table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode.
1.3.6.1.4.1.11.2.88.46.1RowrlQosModeGlobalCfgEntrynot-accessiblecurrentThis table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. Current imp…
1.3.6.1.4.1.11.2.88.46.1.1ColumnrlQosGlobalIndexnot-accessiblecurrentEntry index - currenly only one entry can exist, indexes hard coded with value '1'.
1.3.6.1.4.1.11.2.88.46.1.2ColumnrlQosGlobalQoSModeread-writecurrentThis field replaces deprecated scalar rlQosCliQosMode. Defines the global qos operation mode: disable, basic or advnaced.
1.3.6.1.4.1.11.2.88.46.1.3ColumnrlQosBasicGlobalTrustModeread-writecurrentThis field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos basic mode.
1.3.6.1.4.1.11.2.88.46.1.4ColumnrlQosAdvcGlobalTrustModeread-writecurrentThis field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos advanced mode.
1.3.6.1.4.1.11.2.88.46.1.5ColumnrlQoSPortTrustAdvancedModeread-writecurrentThis field specified whether ports are set to trused or not-trusted by default when switching to qos advanced mode.
1.3.6.1.4.1.11.2.88.46.1.6ColumnrlQosDscpMutationEnableread-writecurrentThis field indicates if dscp to dscp mutation mode is enable. It can be set to true in the following terms: 1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQ…
1.3.6.1.4.1.11.2.88.46.1.7ColumnrlQosModeGlobalCfgStatusread-writecurrentThis status of entry action. In current implementation only one entry exist, therefor only status = active is acceptable.
1.3.6.1.4.1.11.2.88.47TablerlQosClassMapCounterTablenot-accessiblecurrentThe table is used to show statistics for ACL applied on an interface.
1.3.6.1.4.1.11.2.88.47.1RowrlQosClassMapCounterEntrynot-accessiblecurrentThis entry returns the value of the class map counter. Entry is added/deleted to this MIB when counting is enabled/disabled on the class map. The counter is se…
1.3.6.1.4.1.11.2.88.47.1.2ColumnrlQosClassMapCounterValueread-onlycurrentThis field returns the current value of the class map counter.
1.3.6.1.4.1.11.2.88.48TablerlQosApplicationTrapIdTablenot-accessiblecurrentThe read only table is used to get the trapId assisated to application wants to use the trap action in the class map table
1.3.6.1.4.1.11.2.88.48.1RowrlQosApplicationTrapIdEntrynot-accessiblecurrentThis entry holds the trapId for application using the trap action in the class map table.
1.3.6.1.4.1.11.2.88.48.1.1ColumnrlQosApplicationNamenot-accessiblecurrentThis field represents the application name and traffic type.
1.3.6.1.4.1.11.2.88.48.1.2ColumnrlQosApplicationTrapIdread-onlycurrentThis field defines the trap id to be use in the class map entry.
1.3.6.1.4.1.11.2.88.49ScalarrlQoSApplicationDefaultActionread-writecurrentThis scalar specifies application-specific default action
1.3.6.1.4.1.11.2.88.50TablerlQosLogInputInterfacesAceMatchedTablenot-accessiblecurrentThis table holds a list and of ACE matched log-input option interfaces.
1.3.6.1.4.1.11.2.88.50.1RowrlQosLogInputInterfacesAceMatchedEntrynot-accessiblecurrentThis table holds only one entry of port list and vlan list.
1.3.6.1.4.1.11.2.88.50.1.1ColumnrlQosLogInputInterfacesAceMatchedIndexnot-accessiblecurrentAn index is entrie's sequence.
1.3.6.1.4.1.11.2.88.50.1.2ColumnrlQosLogInputInterfacesAceMatchedPortsread-onlycurrentthe matched log-input ACEs port list
1.3.6.1.4.1.11.2.88.50.1.3ColumnrlQosLogInputInterfacesAceMatchedVlanList1to1024read-onlycurrentthe matched log-input ACEs vlan list from 1 to 1024.
1.3.6.1.4.1.11.2.88.50.1.4ColumnrlQosLogInputInterfacesAceMatchedVlanList1025to2048read-onlycurrentthe matched log-input ACEs vlan list from 1025 to 2048.
1.3.6.1.4.1.11.2.88.50.1.5ColumnrlQosLogInputInterfacesAceMatchedVlanList2049to3072read-onlycurrentthe matched log-input ACEs vlan list from 2049 to 3072.
1.3.6.1.4.1.11.2.88.50.1.6ColumnrlQosLogInputInterfacesAceMatchedVlanList3073to4094read-onlycurrentthe matched log-input ACEs vlan list from 3073 to 4094.
1.3.6.1.4.1.11.2.88.51TablerlQosCosProfileTablenot-accessiblecurrentThis table specifies the Cos to queue map per-profile table
1.3.6.1.4.1.11.2.88.51.1RowrlQosCosProfileEntrynot-accessiblecurrentEach entry in this table describes a QoS profile. The indices are Application index, represented by rlQosCosProfileAppIndex Profile index, represent by rlQosCo…
1.3.6.1.4.1.11.2.88.51.1.1ColumnrlQosCosProfileAppIndexnot-accessiblecurrentApplication index.
1.3.6.1.4.1.11.2.88.51.1.2ColumnrlQosCosProfileIndexnot-accessiblecurrentProfile index per-application.
1.3.6.1.4.1.11.2.88.51.1.3ColumnrlQosCosProfileCosIndexnot-accessiblecurrentCoS value of an incoming packet.
1.3.6.1.4.1.11.2.88.51.1.4ColumnrlQosCosProfileEgressCosread-writecurrentCoS value to (optionally) set in 802.1p User Priority field of matching packets.
1.3.6.1.4.1.11.2.88.51.1.5ColumnrlQosCosProfileEgressQueueread-writecurrentTraffic class queue assigned to matching packets.
1.3.6.1.4.1.11.2.88.52TablerlQosCosProfileInterfaceTablenot-accessiblecurrentThis table specifies the Cos profile per-interface
1.3.6.1.4.1.11.2.88.52.1RowrlQosCosProfileInterfaceEntrynot-accessiblecurrentEach entry in this table describes a CoS profile for an interface
1.3.6.1.4.1.11.2.88.52.1.1ColumnrlQosCosProfileInterfaceIfIndexnot-accessiblecurrentInterface index.
1.3.6.1.4.1.11.2.88.52.1.2ColumnrlQosCosProfileInterfaceAppIndexread-writecurrentApplication index.
1.3.6.1.4.1.11.2.88.52.1.3ColumnrlQosCosProfileInterfaceCosProfileIndexread-writecurrentCoS-Profile index per-application.
1.3.6.1.4.1.11.2.88.53TablerlQosAclBoundIfTablenot-accessiblecurrentThis table specifies per ACL its bound interfaces
1.3.6.1.4.1.11.2.88.53.1RowrlQosAclBoundIfEntrynot-accessiblecurrentEach entry in this table describes the interfaces bound to ACL, Ports and Vlans. The index is represented by rlQosAclBoundIfAclId
1.3.6.1.4.1.11.2.88.53.1.1ColumnrlQosAclBoundIfAclIdnot-accessiblecurrentAcl index
1.3.6.1.4.1.11.2.88.53.1.2ColumnrlQosAclBoundedIfPortsListread-onlycurrentPorts list bounded to Acl
1.3.6.1.4.1.11.2.88.53.1.3ColumnrlQosAclBoundedIfVlansList1to1024read-onlycurrentVlan list bounded to Acl from 1 to 1024.
1.3.6.1.4.1.11.2.88.53.1.4ColumnrlQosAclBoundedIfVlansList1025to2048read-onlycurrentVlan list bounded to Acl from 1025 to 2048.
1.3.6.1.4.1.11.2.88.53.1.5ColumnrlQosAclBoundedIfVlansList2049to3072read-onlycurrentVlan list bounded to Acl from 2048 to 3072.
1.3.6.1.4.1.11.2.88.53.1.6ColumnrlQosAclBoundedIfVlansList3073to4094read-onlycurrentVlan list bounded to Acl from 3073 to 4094.
Type Definitions
NameSyntaxStatusDescription
AceActionTypeINTEGER { permit(1), deny(2), deny-DisablePort(3), deny-LogInput(4), permit-LogInput(5) }currentSpecifies one of 4 ACE Actions: 1- Permit- permit to the traffic that define by the parameters. 2- Deny- deny the traffic that define by the parameter. 3- Deny-DisablePort deny the traffic that defined by the parameters…
AceObjectTypeINTEGER { ip(1), ip-TCP(2), ip-UDP(3), ip-Offset(4), mac(5), mac-Offset(6), ip-ICMP(7), ip-IGMP(8), ipv6(9), ipv6-TCP(10), ipv6-UDP(11), ipv6-Offset(12), ipv6-ICMP(13) }currentSpecifies one of 13 ACE types: 1- IP ACE. 2- IP-TCP ACE. 3- IP-UDP ACE. 4- IP-offset ACE. 5- MAC ACE. 6- MAC-offset ACE. 7- IP-ICMP ACE. 8- IP-IGMP ACE. 9- IPv6 ACE. 10- IPv6-TCP ACE. 11- IPv6-UDP ACE. 12- IPv6-offset A…
AclDefaultActionINTEGER { deny-all(1), forward-all(2), application-specific(3) }currentDefault action when the ACL reach end point.
AclObjectTypeINTEGER { mac(1), ip(2), ipv6(3) }currentSpecifies one of 3 ACL types: 1- MAC ACL. 2- IPv4 ACL. 3- IPv6 ACL.
BinaryStatusINTEGER { disable(1), enable(2) }currentSpecifies Disable or enable.
ClassMapActionINTEGER { none(1), setIP-Precedence(2), setDSCP(3), setQueue(4), setCos(5), trust(6) }currentSpecifies one of 8 Class-map actios: 1- none - action not specified - use default action. 2 -Mark IP-Precedence. 3- Mark DSCP. 4- Set Egress queue 5- Mark VPT 6- Choose queue by global trust mode.
ClassMapTypeINTEGER { matchAll(1), matchAny(2) }currentSpecifies one of 2 Class-map types: 1- Match all. logical and between all statements. 2- Match any. logical or between all statements.
ClassOffsetTypeINTEGER { packetStart(1), layer2-start(2), mpls-start(3), layer3-start(4), layer4-start(5), layer5-start(6), vlan(7), in-port(8), out-port(9), vpt(10), ethertype(11), inner-vlan(12), layer3-ipv6-start(13) }currentSpecifies one of 6 offset types: 1- Absolute-start of the packet. 2- Layer 2-start of MAC header. 3- MPLS-start of MPLS header. 4- Layer 3-start of layer 3 header. 5- Layer 4-start of layer 4 header. 6- Layer 5-after TC…
ClassTupleTypeINTEGER { protocol(1), ip-src(2), ip-dest(3), dscp(4), ip-precedence(5), udp-port-src(6), udp-port-dest(7), tcp-port-src(8), tcp-port-dest(9), mac-src(10), mac-dest(11), vlan(12), in-port(13), out-port(14), general(15), vpt(16), ether-type(17), tcp-flags(18), icmp-type(19), icmp-code(20), igmp-type(21), inner-vlan(22), ipv6-src(23), ipv6-dest(24), udp-port-range-start-src(25), udp-port-range-end-src(26), udp-port-range-start-dest(27), udp-port-range-end-dest(28), tcp-port-range-start-src(29), tcp-port-range-end-src(30), tcp-port-range-start-dest(31), tcp-port-range-end-dest(32), ipv6-flow-label(33) }currentSpecifies one of Tuple types
InterfaceTypeINTEGER { vlan(1), port(2) }currentInterface type.
MarkVlanActionINTEGER { noMark(1), mark(2), markNestedVlan(3) }currentSpecifies the mark vlan action type in the class map table. 1 - noMark - No vlan marking 2 - mark - mark vlan tagged. 3 - markNestedVlan - add vlan tag to the packet.
PolicerActionINTEGER { none(1), drop(2), remark(3), explicit-remark(4), cascadePointer(5) }currentSpecifies one of 4 Policer Action: 1- No Action 2- Drop out of profile packets. 3- Remark out of profile packets. 4- Remark to explicit value out of profile packets 5- this policer is part of cascade chain
PolicerTypeINTEGER { single(1), aggregate(2), cascade(3) }currentSpecifies one of 3 Policer types: 1- Single policer only per one class map. 2- Aggregate policer can be applied to several class maps. 3- Cascade policer.
QosGlobalModeINTEGER { disable(1), basic(2), advance(3) }currentSpecifies one of 3 QoS mode: 1- disable no QoS on the system 2- Basic Qos mode only trust mode with ACL are enabled. 3- Advance mode all Qos option are enabled. 4- Service Mode -v750 DEPEREACTED!!! all Qos option are en…
QosTrustModeINTEGER { cos(1), dscp(2), cos-dscp(3) }currentSpecifies one of 6 QoS trust mode: - none.- v750 DEPRECATED - same as globalMode = disable. means that only ACL can be applied. - 802.1p. queue is set by the VPT field. - DSCP. queue is set by the DSCP field - v750 depr…
QueueTypeINTEGER { ef(1), wrr(2) }currentQueue type Ef or WRR.
RedirectActionINTEGER { disabled(1), trap(2), redirectToInterface(3), redirectToAllPorts(4), mirror(5), analyzerPort(6), loopback(7), redirectToPortGroup(8), mirrorAndRedirectToInterface(9), mirrorAndRedirectToInterfacesGroup(10) }currentSpecifies the packet redirection options. Redirection is applied only on permitted packets. 1 - disabled - no redirect 2 - trap - trap to local_host (CPU) 3 - redirectToInterface - redirect to a output interface (port, …
RlQosAceTidxActionDropTypeINTEGER { hardDrop(1), softDrop(2) }currentThe Action Drop Type.
RlQosApplicationDefaultActionTypeINTEGER { forward(1), hard-Drop(2), soft-Drop(3), trap(4) }currentApplication default actions.
RlQosTimeBasedAclWeekPeriodicListBITS { monday(0), tuesday(1), wednesday(2), thursday(3), friday(4), saturday(5), sunday(6) }currentBitmap that includes days of week. Each bit in the bitmap associated with corresponding day of the week.
StatisticsCntrNumOfBitsTypeINTEGER { uint32(32), uint48(48), uint64(64) }currentThe counter can be of different sizes - 32 bit, 48 bit, 64 bit. Maximum is 64.
StatisticsCntrTypeINTEGER { statisticsCntrTypeSetDSCP(1), statisticsCntrTypeDeny(2) }currentThe counter can be of different types, depends on actions adhered to rules that the counter is working on.
MIB Viewer