HPE-Tuning
274 objects
The private MIB module definition for nm device tuning MIB.
Imported Objects
| HPE-BRIDGEMIBOBJECTS-MIB | VlanList1 VlanList2 VlanList3 VlanList4 |
| HPE-MIB | nm |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.29 | IdentityrsTunning | The private MIB module definition for nm device tuning MIB. | ||
| 1.3.6.1.4.1.11.2.29.1 | ScalarrsHighPriority | read-write | current | This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode. |
| 1.3.6.1.4.1.11.2.29.2 | ScalarrsLowPriority | read-write | current | This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode. |
| 1.3.6.1.4.1.11.2.29.3 | ScalarrsDbgLevel | read-write | current | This variable indicates the debug level the Router Server works. the range of this variable is 1..100 |
| 1.3.6.1.4.1.11.2.29.4 | TablersDiagnosticsTable | not-accessible | current | The diagnostics table of the agent |
| 1.3.6.1.4.1.11.2.29.4.1 | RowrsDiagnosticsEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.11.2.29.4.1.1 | ColumnrsDiagnosticsRequestId | read-only | current | The request id of the rejected SNMP request whose diagnostics are specified by this entry. If request id 0xFFFFFFFF is given, the diagnostic of the last reject… |
| 1.3.6.1.4.1.11.2.29.4.1.2 | ColumnrsDiagnosticsCode | read-only | current | The code of the rejected the SNMP request whose diagnostics are specified by this entry. This code may be used to find out the reason for rejection if the diag… |
| 1.3.6.1.4.1.11.2.29.4.1.3 | ColumnrsDiagnosticsLocation | read-only | current | The internal location in the SW rejecting the SNMP request whose diagnostics are specified by this entry. This information is available for debugging purposes … |
| 1.3.6.1.4.1.11.2.29.4.1.4 | ColumnrsDiagnosticsText | read-only | current | The diagnostic text of the rejected SNMP request whose diagnostics are specified by this entry. |
| 1.3.6.1.4.1.11.2.29.5 | ScalarrsConfirmMessagTab | read-write | current | This variable enables the operator to confirm all the message in the event Message Table. |
| 1.3.6.1.4.1.11.2.29.6 | TableeventMessageTable | not-accessible | current | The Event Message table of the agent |
| 1.3.6.1.4.1.11.2.29.6.1 | RoweventMessageEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.11.2.29.6.1.1 | ColumneventNum | read-only | current | The event number,the index of this table. |
| 1.3.6.1.4.1.11.2.29.6.1.2 | ColumneventDesc | read-only | current | The event discription, this text will include time and severity. |
| 1.3.6.1.4.1.11.2.29.7 | NodereaTunning | |||
| 1.3.6.1.4.1.11.2.29.7.4 | ScalarreaIpForwardEnable | read-write | current | The Platform will perform fast IP forwarding if only if this variable's value is enable. |
| 1.3.6.1.4.1.11.2.29.7.5 | ScalarreaIpxForwardEnable | read-write | current | The Platform will perform fast IPX forwarding if only if this variable's value is enable. |
| 1.3.6.1.4.1.11.2.29.8 | NodersMaxEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.1 | NodersMaxBridgeForwardingEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.1.1 | ScalarrsMaxBrgFrwEntries | read-only | current | Maximal number of entries in bridge forwarding table. |
| 1.3.6.1.4.1.11.2.29.8.1.2 | ScalarrsMaxBrgFrwEntriesAfterReset | read-write | current | Future maximal number of entries in bridge forwarding table. |
| 1.3.6.1.4.1.11.2.29.8.2 | NodersMaxIpForwardingEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.2.1 | ScalarrsMaxIpFrwEntries | read-only | current | Maximal number of entries in Ip forwarding table. |
| 1.3.6.1.4.1.11.2.29.8.2.2 | ScalarrsMaxIpFrwEntriesAfterReset | read-write | current | Future maximal number of entries in Ip forwarding table. |
| 1.3.6.1.4.1.11.2.29.8.3 | NodersMaxArpEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.3.1 | ScalarrsMaxArpEntries | read-only | current | Maximal number of entries in Arp forwarding table. |
| 1.3.6.1.4.1.11.2.29.8.3.2 | ScalarrsMaxArpEntriesAfterReset | read-write | current | Future maximal number of entries in Arp forwarding table. |
| 1.3.6.1.4.1.11.2.29.8.4 | NodersMaxIpxForwardingEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.4.1 | ScalarrsMaxIpxFrwEntries | read-only | current | Maximal number of entries in Ipx forwarding table. |
| 1.3.6.1.4.1.11.2.29.8.4.2 | ScalarrsMaxIpxFrwEntriesAfterReset | read-write | current | Future maximal number of entries in Ipx forwarding table. |
| 1.3.6.1.4.1.11.2.29.8.5 | NodersMaxIpxSapEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.5.1 | ScalarrsMaxIpxSapEntries | read-only | current | Maximal number of entries in IpxSap table. |
| 1.3.6.1.4.1.11.2.29.8.5.2 | ScalarrsMaxIpxSapEntriesAfterReset | read-write | current | Future maximal number of entries in IpxSap table. |
| 1.3.6.1.4.1.11.2.29.8.6 | NodersMaxDspClntEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.6.1 | ScalarrsMaxDspClntEntries | read-only | current | Maximal number of entries in rsSdClientsTable. |
| 1.3.6.1.4.1.11.2.29.8.6.2 | ScalarrsMaxDspClntEntriesAfterReset | read-write | current | Future maximal number of entries in rsSdClientsTable. |
| 1.3.6.1.4.1.11.2.29.8.9 | NodersMaxIpFftEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.9.1 | ScalarrsMaxIpSFftEntries | read-only | current | The current maximal size of one IP SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.9.2 | ScalarrsMaxIpSFftEntriesAfterReset | read-write | current | The future (after reset) maximal size of one IP SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.9.3 | ScalarrsMaxIpNFftEntries | read-only | current | The current maximal size of one IP NFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.9.4 | ScalarrsMaxIpNFftEntriesAfterReset | read-write | current | The future (after reset) maximal size of one IP NFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.9.5 | ScalarrsMaxIpSFftSysEntries | read-only | current | The current maximal size of the SYSTEM IP SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.9.6 | ScalarrsMaxIpSFftSysEntriesAfterReset | read-write | current | The future (after reset) maximal size of the SYSTEM IP SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.9.7 | ScalarrsMaxIpNFftSysEntries | read-only | current | The current maximal size of the SYSTEM IP NFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.9.8 | ScalarrsMaxIpNFftSysEntriesAfterReset | read-write | current | The future (after reset) maximal size of the SYSTEM IP NFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.9.9 | ScalarrsMaxIpNextHopEntries | read-only | current | The current maximal size of one IP NextHop Table. |
| 1.3.6.1.4.1.11.2.29.8.9.10 | ScalarrsMaxIpNextHopEntriesAfterReset | read-write | current | The future (after reset) maximal size of one NextHop Table. |
| 1.3.6.1.4.1.11.2.29.8.10 | NodersMaxIpxFftEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.10.1 | ScalarrsMaxIpxSFftEntries | read-only | current | The current maximal size of one IPX SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.10.2 | ScalarrsMaxIpxSFftEntriesAfterReset | read-write | current | The future (after reset) maximal size of one IPX SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.10.3 | ScalarrsMaxIpxNFftEntries | read-only | current | The current maximal size of one IPX NFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.10.4 | ScalarrsMaxIpxNFftEntriesAfterReset | read-write | current | The future (after reset) maximal size of one IPX NFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.10.5 | ScalarrsMaxIpxSFftSysEntries | read-only | current | The current maximal size of the SYSTEM IPX SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.10.6 | ScalarrsMaxIpxSFftSysEntriesAfterReset | read-write | current | The future (after reset) maximal size of the SYSTEM IPX SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.10.7 | ScalarrsMaxIpxNFftSysEntries | read-only | current | The current maximal size of the SYSTEM IPX NFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.10.8 | ScalarrsMaxIpxNFftSysEntriesAfterReset | read-write | current | The future (after reset) maximal size of the SYSTEM IPX NFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.11 | NodersMaxDhcpTuning | |||
| 1.3.6.1.4.1.11.2.29.8.11.1 | ScalarrsMaxDhcpConns | read-only | current | The current maximal number of DHCP connections. |
| 1.3.6.1.4.1.11.2.29.8.11.2 | ScalarrsMaxDhcpConnsAfterReset | read-write | current | The future (after reset) maximal number of DHCP connections. |
| 1.3.6.1.4.1.11.2.29.8.12 | NodersMaxIpmTuning | |||
| 1.3.6.1.4.1.11.2.29.8.12.1 | NodersMaxIpmFftEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.12.1.1 | ScalarrsMaxIpmFftEntries | read-only | current | The current maximal number of the IPM FFT Tables. |
| 1.3.6.1.4.1.11.2.29.8.12.1.2 | ScalarrsMaxIpmFftEntriesAfterReset | read-write | current | The future (after reset) maximal number of the IPM FFT Tables. |
| 1.3.6.1.4.1.11.2.29.8.12.1.3 | ScalarrsIpmFftAging | read-write | current | The aging timeout of the IPM FFT Tables. |
| 1.3.6.1.4.1.11.2.29.8.12.2 | NodersMaxIgmpTuning | |||
| 1.3.6.1.4.1.11.2.29.8.12.2.1 | ScalarrsMaxIgmpInterfaceEntries | read-only | current | Maximal number of entries in the IGMP Neighbor Table. |
| 1.3.6.1.4.1.11.2.29.8.12.2.2 | ScalarrsMaxIgmpInterfaceEntriesAfterReset | read-write | current | Future maximal number of entries in the IGMP Neighbor Table. |
| 1.3.6.1.4.1.11.2.29.8.12.2.3 | ScalarrsMaxIgmpCacheEntries | read-only | current | Maximal number of entries in the IGMP Cache Table. |
| 1.3.6.1.4.1.11.2.29.8.12.2.4 | ScalarrsMaxIgmpCacheEntriesAfterReset | read-write | current | Future maximal number of entries in the IGMP Cache Table. |
| 1.3.6.1.4.1.11.2.29.8.12.3 | NodersMaxPimTuning | |||
| 1.3.6.1.4.1.11.2.29.8.12.3.1 | ScalarrsMaxPimNeighborEntries | read-only | current | Maximal number of entries in the PIM Neighbor Table. |
| 1.3.6.1.4.1.11.2.29.8.12.3.2 | ScalarrsMaxPimNeighborEntriesAfterReset | read-write | current | Future maximal number of entries in the PIM Neighbor Table. |
| 1.3.6.1.4.1.11.2.29.8.12.3.3 | ScalarrsMaxPimRouteEntries | read-only | current | Maximal number of entries in the PIM Route Table. |
| 1.3.6.1.4.1.11.2.29.8.12.3.4 | ScalarrsMaxPimRouteEntriesAfterReset | read-write | current | Future maximal number of entries in the PIM Route Table. |
| 1.3.6.1.4.1.11.2.29.8.12.3.5 | ScalarrsMaxPimRouteNextHopEntries | read-only | current | Maximal number of entries in the PIM Route Next Hop Table. |
| 1.3.6.1.4.1.11.2.29.8.12.3.6 | ScalarrsMaxPimRouteNextHopEntriesAfterReset | read-write | current | Future maximal number of entries in the PIM Route Next Hop Table. |
| 1.3.6.1.4.1.11.2.29.8.12.3.7 | ScalarrsMaxPimInterfaceEntriesAfterReset | read-write | current | Future maximal number of interfaces in the PIM Interface Table. |
| 1.3.6.1.4.1.11.2.29.8.12.3.8 | ScalarrsMaxPimInterfaceEntries | read-write | current | Maximal number of interfaces in the PIM Interface Table. |
| 1.3.6.1.4.1.11.2.29.8.12.4 | NodersMaxDvmrpTuning | |||
| 1.3.6.1.4.1.11.2.29.8.12.4.1 | ScalarrsMaxDvmrpNeighborEntries | read-only | current | Maximal number of entries in the Dvmrp Neighbor Table. |
| 1.3.6.1.4.1.11.2.29.8.12.4.2 | ScalarrsMaxDvmrpNeighborEntriesAfterReset | read-write | current | Future maximal number of entries in the Dvmrp Neighbor Table. |
| 1.3.6.1.4.1.11.2.29.8.12.4.3 | ScalarrsMaxDvmrpRouteEntries | read-only | current | Maximal number of entries in the Dvmrp Route Table. |
| 1.3.6.1.4.1.11.2.29.8.12.4.4 | ScalarrsMaxDvmrpRouteEntriesAfterReset | read-write | current | Future maximal number of entries in the Dvmrp Route Table. |
| 1.3.6.1.4.1.11.2.29.8.12.4.5 | ScalarrsMaxDvmrpMRouteEntries | read-only | current | Maximal number of entries in the Dvmrp Multicast Route Table. |
| 1.3.6.1.4.1.11.2.29.8.12.4.6 | ScalarrsMaxDvmrpMRouteEntriesAfterReset | read-write | current | Future maximal number of entries in the Dvmrp Multicast Route Table. |
| 1.3.6.1.4.1.11.2.29.8.12.4.7 | ScalarrsMaxDvmrpInterfaceEntries | read-write | current | Maximal number of interfaces in the Dvmrp Interface Table. |
| 1.3.6.1.4.1.11.2.29.8.12.4.8 | ScalarrsMaxDvmrpInterfaceEntriesAfterReset | read-write | current | Future maximal number of interfaces in the Dvmrp Interface Table. |
| 1.3.6.1.4.1.11.2.29.8.12.5 | NodersMaxPigmpTuning | |||
| 1.3.6.1.4.1.11.2.29.8.12.5.1 | ScalarrsMaxPigmpRouteEntries | read-only | current | Maximal number of entries in the IGMP Proxy Routing Table. |
| 1.3.6.1.4.1.11.2.29.8.12.5.2 | ScalarrsMaxPigmpRouteEntriesAfterReset | read-write | current | Future maximal number of entries in the IGMP Proxy Routing Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6 | NodersMaxPimSmTuning | |||
| 1.3.6.1.4.1.11.2.29.8.12.6.1 | ScalarrsMaxPimSmNeighborEntries | read-only | current | Maximal number of entries in the PIM Neighbor Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.2 | ScalarrsMaxPimSmNeighborEntriesAfterReset | read-write | current | Future maximal number of entries in the PIM Neighbor Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.3 | ScalarrsMaxPimSmRouteEntries | read-only | current | Maximal number of entries in the PIM Route Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.4 | ScalarrsMaxPimSmRouteEntriesAfterReset | read-write | current | Future maximal number of entries in the PIM Route Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.5 | ScalarrsMaxPimSmInterfaceEntries | read-only | current | Maximal number of entries in the PIM Interface Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.6 | ScalarrsMaxPimSmInterfaceEntriesAfterReset | read-write | current | Future maximal number of entries in the PIM Interface Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.7 | ScalarrsMaxPimSmRPSetEntries | read-only | current | Maximal number of entries in the RPSet Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.8 | ScalarrsMaxPimSmRPSetEntriesAfterReset | read-write | current | Future maximal number of entries in the RPSet Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.9 | ScalarrsMaxPimSmCRPEntries | read-only | current | Maximal number of entries in the RPSet Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.10 | ScalarrsMaxPimSmCRPEntriesAfterReset | read-write | current | Future maximal number of entries in the RPSet Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.11 | ScalarrsMaxNumberRpAddresesInGroupRange | read-only | current | Maximal number of rp addresses per group range in the RPSet Table. |
| 1.3.6.1.4.1.11.2.29.8.12.6.12 | ScalarrsMaxNumberRpAddresesInGroupRangeAfterReset | read-write | current | Future maximal number of rp addresses per group range in the RPSet Table. |
| 1.3.6.1.4.1.11.2.29.8.13 | NodersMaxRmonTuning | |||
| 1.3.6.1.4.1.11.2.29.8.13.1 | ScalarrsMaxRmonLogEntries | read-only | current | Maximal number of entries in RMON Log table. |
| 1.3.6.1.4.1.11.2.29.8.13.2 | ScalarrsMaxRmonLogEntriesAfterReset | read-write | current | Future maximal number of entries in RMON Log table. |
| 1.3.6.1.4.1.11.2.29.8.13.3 | ScalarrsMaxRmonEtherHistoryEntries | read-only | current | Maximal number of entries in RMON EtherHistory table. |
| 1.3.6.1.4.1.11.2.29.8.13.4 | ScalarrsMaxRmonEtherHistoryEntriesAfterReset | read-write | current | Future maximal number of entries in RMON EtherHistory table. |
| 1.3.6.1.4.1.11.2.29.8.14 | NodersMaxIgmpSnoopTuning | |||
| 1.3.6.1.4.1.11.2.29.8.14.1 | ScalarrsMaxIgmpSnoopGroupEntries | read-only | current | The maximum number of entries in the IGMP Snooping group table. |
| 1.3.6.1.4.1.11.2.29.8.14.2 | ScalarrsMaxIgmpSnoopGroupEntriesAfterReset | read-write | current | Future maximal number of entries in the IGMP Snooping group table. |
| 1.3.6.1.4.1.11.2.29.8.15 | NodersMaxVlansTuning | |||
| 1.3.6.1.4.1.11.2.29.8.15.1 | ScalarrsMaxVlansEntries | read-only | current | The maximum number of entries in the VLANs table. |
| 1.3.6.1.4.1.11.2.29.8.15.2 | ScalarrsMaxVlansEntriesAfterReset | read-write | current | Future maximal number of entries in the VLANs table. |
| 1.3.6.1.4.1.11.2.29.8.15.3 | ScalarrsMaxVlanMapping | read-only | current | The maximum number of VLAN mapping entries in the TCAM. |
| 1.3.6.1.4.1.11.2.29.8.15.4 | ScalarrsMaxVlanMappingAfterReset | read-write | current | Future maximal number of VLAN mapping entries in the TCAM. |
| 1.3.6.1.4.1.11.2.29.8.16 | NodersMaxPolicyTuning | |||
| 1.3.6.1.4.1.11.2.29.8.16.1 | ScalarrsMaxPolicyMaxRulesEntries | read-only | current | Maximal number of entries in the Policy Route Table. |
| 1.3.6.1.4.1.11.2.29.8.16.2 | ScalarrsMaxPolicyMaxRulesEntriesAfterReset | read-write | current | Future maximal number of entries in the Policy Route Table. |
| 1.3.6.1.4.1.11.2.29.8.16.3 | ScalarrsMaxPolicySimpleMibMaxRulesEntries | read-only | current | Maximal number of entries in the Policy SimpleMib Table. |
| 1.3.6.1.4.1.11.2.29.8.16.4 | ScalarrsMaxPolicySimpleMibMaxRulesEntriesAfterReset | read-write | current | Future maximal number of entries in the Policy SimpleMib Table. |
| 1.3.6.1.4.1.11.2.29.8.16.5 | ScalarrsMaxPolicySimpleMibMaxProfilesEntries | read-only | current | Maximal number of entries in the profile Policy SimpleMib Table. |
| 1.3.6.1.4.1.11.2.29.8.16.6 | ScalarrsMaxPolicySimpleMibMaxProfilesEntriesAfterReset | read-write | current | Future maximal number of entries in the profile Policy SimpleMib Table. |
| 1.3.6.1.4.1.11.2.29.8.17 | NodersMaxGvrpVlansTuning | |||
| 1.3.6.1.4.1.11.2.29.8.17.1 | ScalarrsMaxGvrpVlans | read-only | current | The maximum number of VLANs that can participant in Gvrp. |
| 1.3.6.1.4.1.11.2.29.8.17.2 | ScalarrsMaxGvrpVlansAfterReset | read-write | current | Future maximal number of VLANs that can participant in Gvrp. |
| 1.3.6.1.4.1.11.2.29.8.18 | NodersMaxTraceRouteTuning | |||
| 1.3.6.1.4.1.11.2.29.8.18.1 | ScalarrsMaxTraceRouteControlEntries | read-only | current | The maximum number of trace route control entries. |
| 1.3.6.1.4.1.11.2.29.8.18.2 | ScalarrsMaxTraceRouteControlEntriesAfterReset | read-write | current | Future maximum number of trace route control entries. |
| 1.3.6.1.4.1.11.2.29.8.18.3 | ScalarrsMaxTraceRouteProbeHistoryEntries | read-only | current | The maximum number of trace route probe history entries. |
| 1.3.6.1.4.1.11.2.29.8.18.4 | ScalarrsMaxTraceRouteProbeHistoryEntriesAfterReset | read-write | current | Future maximum number of trace route probe history entries. |
| 1.3.6.1.4.1.11.2.29.8.19 | NodersMaxSnmpTuning | |||
| 1.3.6.1.4.1.11.2.29.8.19.1 | ScalarrsMaxSnmpCommunityEntries | read-only | current | The maximum number of snmpCommunityTable entries. |
| 1.3.6.1.4.1.11.2.29.8.19.2 | ScalarrsMaxSnmpCommunityEntriesAfterReset | read-write | current | Future maximum number of snmpCommunityTable entries. |
| 1.3.6.1.4.1.11.2.29.8.20 | NodersMaxSocketTuning | |||
| 1.3.6.1.4.1.11.2.29.8.20.1 | ScalarrsMaxNumberOfSockets | read-only | current | Maximal number of sockets. |
| 1.3.6.1.4.1.11.2.29.8.20.2 | ScalarrsMaxNumberOfSocketsAfterReset | read-write | current | Future Maximal number of sockets. |
| 1.3.6.1.4.1.11.2.29.8.20.3 | ScalarrsMaxSizeOfSocketDataPool | read-only | current | Maximal size of socket data pool. |
| 1.3.6.1.4.1.11.2.29.8.20.4 | ScalarrsMaxSizeOfSocketDataPoolAfterReset | read-write | current | Future Maximal size of socket data pool. |
| 1.3.6.1.4.1.11.2.29.8.21 | NodersMaxIpRouteTuning | |||
| 1.3.6.1.4.1.11.2.29.8.21.1 | ScalarrsMaxIpPrefixes | read-only | current | Maximal number of IP prefixes that router supports. |
| 1.3.6.1.4.1.11.2.29.8.21.2 | ScalarrsMaxIpPrefixesAfterReset | read-write | current | FutureMaximal number of IP prefixes that router supports. |
| 1.3.6.1.4.1.11.2.29.8.22 | NodersMaxIpNextHopSetTuning | |||
| 1.3.6.1.4.1.11.2.29.8.22.1 | ScalarrsMaxIpNextHopSetEntries | read-only | current | Maximal number of NextHops that may be used for forwarding for a destinaton. |
| 1.3.6.1.4.1.11.2.29.8.22.2 | ScalarrsMaxIpNextHopSetEntriesAfterReset | read-write | current | FutureMaximal number of NextHops that may be used for forwarding for a destinaton. |
| 1.3.6.1.4.1.11.2.29.8.23 | NodersMaxIpEcmpTuning | |||
| 1.3.6.1.4.1.11.2.29.8.23.1 | ScalarrsMaxIpEcmpEntrySize | read-only | current | Maximum number of ECMP Sets for forwarding. |
| 1.3.6.1.4.1.11.2.29.8.23.2 | ScalarrsMaxIpEcmpEntrySizeAfterReset | read-write | current | FutureMaximum number of ECMP Sets for forwarding. |
| 1.3.6.1.4.1.11.2.29.8.24 | NodersMaxdot1xEapRequestTuning | |||
| 1.3.6.1.4.1.11.2.29.8.24.1 | ScalarrsMaxdot1xEapRequestEntries | read-only | current | The maximum number of eap request packets entries that can be retransmitted. |
| 1.3.6.1.4.1.11.2.29.8.24.2 | ScalarrsMaxdot1xEapRequestEntriesAfterReset | read-write | current | Future maximum number of eap request packets entries that can be retransmitted. |
| 1.3.6.1.4.1.11.2.29.8.25 | NodersMaxIpInterfaceTuning | |||
| 1.3.6.1.4.1.11.2.29.8.25.1 | ScalarrsMaxIpInterfaces | read-only | current | Maximal number of IP interfaces. Applies to inBand IP interfaces. |
| 1.3.6.1.4.1.11.2.29.8.25.2 | ScalarrsMaxIpInterfacesAfterReset | read-write | current | FutureMaximal number of IP interfaces. Applies to inBand IP interfaces. |
| 1.3.6.1.4.1.11.2.29.8.26 | NodersMaxIpv6FftEntriesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.26.1 | ScalarrsMaxIpv6SFftEntries | read-only | current | The current maximal size of one IPV6 SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.26.2 | ScalarrsMaxIpv6SFftEntriesAfterReset | read-write | current | The future (after reset) maximal size of one IPV6 SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.26.3 | ScalarrsMaxIpv6SFftSysEntries | read-only | current | The current maximal size of the SYSTEM IPV6 SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.26.4 | ScalarrsMaxIpv6SFftSysEntriesAfterReset | read-write | current | The future (after reset) maximal size of the SYSTEM IPV6 SFFT Table. |
| 1.3.6.1.4.1.11.2.29.8.26.5 | ScalarrsMaxIpv6Prefixes | read-only | current | Maximal number of IPV6 prefixes that router supports. |
| 1.3.6.1.4.1.11.2.29.8.26.6 | ScalarrsMaxIpv6PrefixesAfterReset | read-write | current | FutureMaximal number of IPV6 prefixes that router supports. |
| 1.3.6.1.4.1.11.2.29.8.26.7 | ScalarrsMaxIpv6NextHopEntries | read-only | current | The current maximal size of one IPV6 NextHop Table. |
| 1.3.6.1.4.1.11.2.29.8.26.8 | ScalarrsMaxIpv6NextHopEntriesAfterReset | read-write | current | The future (after reset) maximal size of one NextHop Table. |
| 1.3.6.1.4.1.11.2.29.8.26.9 | ScalarrsMaxIpv6NextHopSetEntries | read-only | current | Maximal number of NextHops that may be used for forwarding for a destinaton. |
| 1.3.6.1.4.1.11.2.29.8.26.10 | ScalarrsMaxIpv6NextHopSetEntriesAfterReset | read-write | current | FutureMaximal number of NextHops that may be used for forwarding for a destinaton. |
| 1.3.6.1.4.1.11.2.29.8.26.11 | ScalarrsMaxIpv6GlobalAddresses | read-only | current | Maximal global number of IPV6 addresses. |
| 1.3.6.1.4.1.11.2.29.8.26.12 | ScalarrsMaxIpv6GlobalAddressesAfterReset | read-write | current | FutureMaximal global number of IPV6 addresses. |
| 1.3.6.1.4.1.11.2.29.8.26.13 | ScalarrsMaxArpTunnelStartEntries | read-only | current | Maximal global number of tunnel start and ARP entries. Tunnel start refer to tunnel remote station |
| 1.3.6.1.4.1.11.2.29.8.26.14 | ScalarrsMaxArpTunnelStartEntriesAfterReset | read-write | current | FutureMaximal global number of tunnel start and ARP entries. Tunnel start refer to tunnel remote station |
| 1.3.6.1.4.1.11.2.29.8.27 | NodersMaxIpv6InterfaceTuning | |||
| 1.3.6.1.4.1.11.2.29.8.27.1 | ScalarrsMaxIpv6Interfaces | read-only | current | Maximal number of IPV6 interfaces. Applies to inBand IPV6 interfaces. |
| 1.3.6.1.4.1.11.2.29.8.27.2 | ScalarrsMaxIpv6InterfacesAfterReset | read-write | current | FutureMaximal number of IPV6 interfaces. Applies to inBand IPV6 interfaces. |
| 1.3.6.1.4.1.11.2.29.8.27.3 | ScalarrsMaxIpv6AddrPerInterfaces | read-only | current | Maximal number of IPV6 Addresses per interfaces. |
| 1.3.6.1.4.1.11.2.29.8.27.4 | ScalarrsMaxIpv6AddrPerInterfacesAfterReset | read-write | current | FutureMaximal number of IPV6 Addresses per interfaces. |
| 1.3.6.1.4.1.11.2.29.8.28 | NodersMaxIpRoutesTuning | |||
| 1.3.6.1.4.1.11.2.29.8.28.1 | ScalarrsMaxIpv4Routes | read-only | current | The maximum number of IPv4 routers supported by the IPv4 Unicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.2 | ScalarrsMaxIpv4RoutesAfterReset | read-write | current | Future Maximal number of IPv4 routers supported by the IPv4 Unicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.3 | ScalarrsMaxIpv6Routes | read-only | current | The maximum number of IPv6 routers supported by the IPv6 Unicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.4 | ScalarrsMaxIpv6RoutesAfterReset | read-write | current | Future Maximal number of IPv6 routers supported by the IPv6 Unicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.5 | ScalarrsMaxIpmv4Routes | read-only | current | The maximum number of IPv4 routers ((*,G) and (S,G)) supported by the IPv4 Multicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.6 | ScalarrsMaxIpmv4RoutesAfterReset | read-write | current | Future Maximal number of IPv4 routers ((*,G) and (S,G)) supported by the IPv4 Multicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.7 | ScalarrsMaxIpmv6Routes | read-only | current | The maximum number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.8 | ScalarrsMaxIpmv6RoutesAfterReset | read-write | current | Future Maximal number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.9 | ScalarrsMaxIpv4PbrRoutes | read-only | current | The maximum number of IPv4 policy routes supported by the IPv4 Unicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.10 | ScalarrsMaxIpv4PbrRoutesAfterReset | read-write | current | Future Maximal number of IPv4 policy routes supported by the IPv4 Unicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.11 | ScalarrsMaxIpv6PbrRoutes | read-only | current | The maximum number of IPv6 policy routes supported by the IPv4 Unicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.8.28.12 | ScalarrsMaxIpv6PbrRoutesAfterReset | read-write | current | Future Maximal number of IPv6 policy routes supported by the IPv4 Unicast Hardware Forwarding Table. |
| 1.3.6.1.4.1.11.2.29.11 | NodersTcpTuning | |||
| 1.3.6.1.4.1.11.2.29.11.1 | ScalarrsTcpMemoryPoolSizeAfterReset | read-write | current | The size of the memory pool that the tcp will allocate after reset. The memory pool is used for sending packets |
| 1.3.6.1.4.1.11.2.29.11.2 | ScalarrsTcpMemoryPoolSize | read-only | current | The size of the memory pool that the tcp uses currently. The memory pool is used for sending packets |
| 1.3.6.1.4.1.11.2.29.12 | NodersRadiusTuning | |||
| 1.3.6.1.4.1.11.2.29.12.1 | ScalarrsRadiusMemoryPoolSizeAfterReset | read-write | current | The size of the memory pool that radius will allocate after reset. The memory pool is used for attributes |
| 1.3.6.1.4.1.11.2.29.12.2 | ScalarrsRadiusMemoryPoolSize | read-only | current | The size of the memory pool that radius uses currently. The memory pool is used for attributes |
| 1.3.6.1.4.1.11.2.29.13 | NoderlSyslogTuning | |||
| 1.3.6.1.4.1.11.2.29.13.3 | ScalarrlSyslogFilePercentToDeleteWhenCompacting | read-only | current | When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the current value. |
| 1.3.6.1.4.1.11.2.29.13.4 | ScalarrlSyslogFilePercentToDeleteWhenCompactingAfterReset | read-write | current | When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the value after reset. |
| 1.3.6.1.4.1.11.2.29.13.5 | ScalarrlSyslogCacheSize | read-only | current | The size of memory cache of last errors reported. This cache is cyclic. This is the current value. |
| 1.3.6.1.4.1.11.2.29.13.6 | ScalarrlSyslogCacheSizeAfterReset | read-write | current | The size of memory cache of last errors reported. This cache is cyclic. This is the value after reset. |
| 1.3.6.1.4.1.11.2.29.14 | NoderlMngInfTuning | |||
| 1.3.6.1.4.1.11.2.29.14.1 | ScalarrlMaxNumberOfAccessRules | read-only | current | The Maximum number of rules per Access List that can be defined |
| 1.3.6.1.4.1.11.2.29.14.2 | ScalarrlMaxNumberOfAccessRulesAfterReset | read-write | current | The Maximum number of rules per Access List for after reset tuning |
| 1.3.6.1.4.1.11.2.29.16 | ScalarrsDiagnosticTextSource | read-write | current | The source from which SNMP diagnostics message texts should be taken. |
| 1.3.6.1.4.1.11.2.29.17 | NodersMultiSession | |||
| 1.3.6.1.4.1.11.2.29.17.1 | ScalarrsMultiSessionMaxSessionsAfterReset | read-write | current | The maximum number of terminal sessions (serial, telnet and ssh) available after reset. |
| 1.3.6.1.4.1.11.2.29.17.2 | ScalarrsMultiSessionMaxSessions | read-only | current | The maximum number of terminal sessions (serial, telnet and ssh) available. |
| 1.3.6.1.4.1.11.2.29.18 | NoderlDnsClTuning | |||
| 1.3.6.1.4.1.11.2.29.18.1 | ScalarrlMaxDnsClCacheRREntries | read-only | current | The current maximal number of DNS client cache entries. |
| 1.3.6.1.4.1.11.2.29.18.2 | ScalarrlMaxDnsClCacheRREntriesAfterReset | read-write | current | The future (after reset) maximal number of DNS client cache entries. |
| 1.3.6.1.4.1.11.2.29.18.3 | ScalarrlMaxDnsClNCacheErrEntries | read-only | current | The current maximal number of DNS client negative cache entries. |
| 1.3.6.1.4.1.11.2.29.18.4 | ScalarrlMaxDnsClNCacheErrEntriesAfterReset | read-write | current | The future (after reset) maximal number of DNS client negative cache entries. |
| 1.3.6.1.4.1.11.2.29.18.5 | ScalarrlMaxDnsClNamesEntries | read-only | current | The current maximal number of DNS client static names entries. |
| 1.3.6.1.4.1.11.2.29.18.6 | ScalarrlMaxDnsClNamesEntriesAfterReset | read-write | current | The future (after reset) maximal number of DNS client static names entries. |
| 1.3.6.1.4.1.11.2.29.19 | TablerlTuningParamsTable | not-accessible | current | table to show tuning : limits curent and after reset values. |
| 1.3.6.1.4.1.11.2.29.19.1 | RowrlTuningParamsEntry | not-accessible | current | Defines the contents of each line in the rlTuningParamsTable table. |
| 1.3.6.1.4.1.11.2.29.19.1.1 | ColumnrlTuningParamsName | read-only | current | Index to the rlTuningParamsTable. name of current value Mib for this entry. |
| 1.3.6.1.4.1.11.2.29.19.1.2 | ColumnrlTuningParamsCurrentValue | read-only | current | This variable current value used in this run by the system. |
| 1.3.6.1.4.1.11.2.29.19.1.3 | ColumnrlTuningParamsAfterResetValue | read-only | current | This variable value that will be used in next run by the system. i.e. the value will be effective after next reboot |
| 1.3.6.1.4.1.11.2.29.19.1.4 | ColumnrlTuningParamsDefaultValue | read-only | current | This variable value that is used by the system as default. |
| 1.3.6.1.4.1.11.2.29.19.1.5 | ColumnrlTuningParamsMinimalValue | read-only | current | This variable value indicate minimum value. this is the lower limit for editing the value after reset. |
| 1.3.6.1.4.1.11.2.29.19.1.6 | ColumnrlTuningParamsMaximalValue | read-only | current | This variable value indicate maximum value. This is the upper limit for editing the value after reset. |
| 1.3.6.1.4.1.11.2.29.20 | TablerlHostParamTable | not-accessible | current | table to show tuning : limits curent and after reset values. |
| 1.3.6.1.4.1.11.2.29.20.1 | RowrlHostParamEntry | not-accessible | current | Defines the contents of each line in the rlHostParamTable table. |
| 1.3.6.1.4.1.11.2.29.20.1.1 | ColumnrlHostParamName | read-only | current | Index to the rlHostParamTable. name of current value Mib for this entry. |
| 1.3.6.1.4.1.11.2.29.20.1.2 | ColumnrlHostParamValue | read-only | current | This variable indicates the current INTEGER value used in this run by the system. Applicable only if rlHostParamType has 'int' value |
| 1.3.6.1.4.1.11.2.29.20.1.3 | ColumnrlHostParamType | read-only | current | This variable indicates the type of this host parameter. int - the value will be appear in the rlHostParamValue instance of this conceptual row. uint - the val… |
| 1.3.6.1.4.1.11.2.29.20.1.4 | ColumnrlHostParamUINT | read-only | current | This variable indicates the current UINT value used in this run by the system. Applicable only if rlHostParamType has 'uint', inetAddress or truthValue value |
| 1.3.6.1.4.1.11.2.29.20.1.5 | ColumnrlHostParamOctetString | read-only | current | This variable indicates the current OCTET STRING value used in this run by the system. Applicable only if rlHostParamType has octetString, ipV6address, ipV6zAd… |
| 1.3.6.1.4.1.11.2.29.20.1.6 | ColumnrlHostParamIpAddress | read-only | current | This variable indicates the current IpAddress value used in this run by the system. Applicable only if rlHostParamType has ipV4address value |
| 1.3.6.1.4.1.11.2.29.20.1.7 | ColumnrlHostParamObjectId | read-only | current | This variable indicates the current OBJECT IDENTIFIER value used in this run by the system. Applicable only if rlHostParamType has objectIdentifier value |
| 1.3.6.1.4.1.11.2.29.21 | NoderlOspfTuning | |||
| 1.3.6.1.4.1.11.2.29.21.1 | ScalarrlMaxOspfInterfaces | read-only | current | The current maximum number of ospf interfaces. |
| 1.3.6.1.4.1.11.2.29.21.2 | ScalarrlMaxOspfInterfacesAfterReset | read-write | current | The future (after reset) maximum number of ospf interfaces. |
| 1.3.6.1.4.1.11.2.29.21.3 | ScalarrlMaxOspfAreas | read-only | current | The current maximum number of ospf areas. |
| 1.3.6.1.4.1.11.2.29.21.4 | ScalarrlMaxOspfAreasAfterReset | read-write | current | The future (after reset) maximum number of ospf areas. |
| 1.3.6.1.4.1.11.2.29.21.5 | ScalarrlMaxOspfNeighbors | read-only | current | The current maximum number of ospf neighbors. |
| 1.3.6.1.4.1.11.2.29.21.6 | ScalarrlMaxOspfNeighborsAfterReset | read-write | current | The future (after reset) maximum number of ospf neighbors. |
| 1.3.6.1.4.1.11.2.29.21.7 | ScalarrlMaxOspfAbrPerArea | read-only | current | The current maximum number of ABR in ospf area. |
| 1.3.6.1.4.1.11.2.29.21.8 | ScalarrlMaxOspfAbrPerAreaAfterReset | read-write | current | The future (after reset) maximum number of ABR in ospf area. |
| 1.3.6.1.4.1.11.2.29.21.9 | ScalarrlMaxOspfNetsInAs | read-only | current | The current maximum number of networks in AS. |
| 1.3.6.1.4.1.11.2.29.21.10 | ScalarrlMaxOspfNetsInAsAfterReset | read-write | current | The future (after reset) maximum number of networks in AS. |
| 1.3.6.1.4.1.11.2.29.22 | NoderlVlanTuning | |||
| 1.3.6.1.4.1.11.2.29.22.1 | ScalarrlVlanDefaultVID | read-only | current | The default vlan vid. |
| 1.3.6.1.4.1.11.2.29.22.2 | ScalarrlVlanDefaultVIDAfterReset | read-write | current | The default vlan vid after rest |
| 1.3.6.1.4.1.11.2.29.22.3 | TablerlVlanUsageForbiddenListTable | not-accessible | current | The list of vlan IDs that forbidden for internal usage. |
| 1.3.6.1.4.1.11.2.29.22.3.1 | RowrlVlanUsageForbiddenListEntry | not-accessible | current | Statical created by local or network management VLAN list |
| 1.3.6.1.4.1.11.2.29.22.3.1.1 | ColumnrlVlanUsageForbiddenListIndex | read-only | current | An index is entrie's sequence. |
| 1.3.6.1.4.1.11.2.29.22.3.1.2 | ColumnrlVlanUsageForbiddenList1to1024 | read-only | current | A list of staticaly created vlans from 1 to 1024. |
| 1.3.6.1.4.1.11.2.29.22.3.1.3 | ColumnrlVlanUsageForbiddenList1025to2048 | read-only | current | A list of according to the type field created vlans from 1025 to 2048. |
| 1.3.6.1.4.1.11.2.29.22.3.1.4 | ColumnrlVlanUsageForbiddenList2049to3072 | read-only | current | A list of according to the type field created vlans from 2049 to 3072. |
| 1.3.6.1.4.1.11.2.29.22.3.1.5 | ColumnrlVlanUsageForbiddenList3073to4094 | read-only | current | A list of according to the type field created vlans from 3073 to 4094. |
| 1.3.6.1.4.1.11.2.29.22.4 | TablerlVlanUsageForbiddenListAfterResetTable | not-accessible | current | The list of vlan IDs that forbidden for internal usage. The configuration applied after the system reset. |
| 1.3.6.1.4.1.11.2.29.22.4.1 | RowrlVlanUsageForbiddenListAfterResetEntry | not-accessible | current | Staticly created by local or network management vlan list |
| 1.3.6.1.4.1.11.2.29.22.4.1.1 | ColumnrlVlanUsageForbiddenListAfterResetIndex | read-write | current | An index is entrie's sequence. |
| 1.3.6.1.4.1.11.2.29.22.4.1.2 | ColumnrlVlanUsageForbiddenListAfterReset1to1024 | read-write | current | A list of staticaly created vlans from 1 to 1024. |
| 1.3.6.1.4.1.11.2.29.22.4.1.3 | ColumnrlVlanUsageForbiddenListAfterReset1025to2048 | read-write | current | A list of according to the type field created vlans from 1025 to 2048. |
| 1.3.6.1.4.1.11.2.29.22.4.1.4 | ColumnrlVlanUsageForbiddenListAfterReset2049to3072 | read-write | current | A list of according to the type field created vlans from 2049 to 3072. |
| 1.3.6.1.4.1.11.2.29.22.4.1.5 | ColumnrlVlanUsageForbiddenListAfterReset3073to4094 | read-write | current | A list of according to the type field created vlans from 3073 to 4094. |
| 1.3.6.1.4.1.11.2.29.23 | NoderlDependendFeaturesEnableTuning | |||
| 1.3.6.1.4.1.11.2.29.23.1 | ScalarrlDependendFeaturesEnabled | read-only | current | Current set of running features. These features combinations may limit by A. The same resource (such as ASIC module). B. limitation of product or logic for com… |
| 1.3.6.1.4.1.11.2.29.23.2 | ScalarrlDependendFeaturesEnabledAfterReset | read-write | current | Next system load (after reset) set of running features. These features combinations limited by A. The same resource (such as ASIC module). B. Limitation of pro… |
| 1.3.6.1.4.1.11.2.29.24 | NoderlIpDhcpSnoopingTuning | |||
| 1.3.6.1.4.1.11.2.29.24.1 | ScalarrlMaxIpDhcpSnoopingEntries | read-only | current | The current maximum number of DHCP snooping entries. |
| 1.3.6.1.4.1.11.2.29.24.2 | ScalarrlMaxIpDhcpSnoopingEntriesAfterReset | read-write | current | The future (after reset) maximum number of DHCP snooping entries. |
| 1.3.6.1.4.1.11.2.29.25 | NoderlIscsiSnoopTuning | |||
| 1.3.6.1.4.1.11.2.29.25.1 | ScalarrlIscsiSnoopMaxNumOfConnections | read-only | current | Defines the presetly effective upper limit of iSCSI connections number the device guarantees to support |
| 1.3.6.1.4.1.11.2.29.25.2 | ScalarrlIscsiSnoopMaxNumOfConnectionsAfterReset | read-write | current | Defines the upper limit of iSCSI connections number the device will have to support following the looming System reset |
| 1.3.6.1.4.1.11.2.29.26 | NoderlDhcpServerTuning | |||
| 1.3.6.1.4.1.11.2.29.26.1 | ScalarrlDhcpSrvMaxAllocatedAddresses | read-only | current | Defines the maximal number of allocated addresses by DHCP server |
| 1.3.6.1.4.1.11.2.29.26.2 | ScalarrlDhcpSrvMaxAllocatedAddressesAfterReset | read-write | current | Defines the maximal number of allocated addresses by DHCP server activated after reset |
| 1.3.6.1.4.1.11.2.29.27 | ScalarrlBrgMacHashChainLen | read-only | current | Current depth of the MAC address hashing Table |
| 1.3.6.1.4.1.11.2.29.28 | ScalarrlBrgMacHashChainLenAfterReset | read-write | current | Defines the depth in step of 4, of the MAC address hashing Table after reset. The mac chain length is the scalar value multiplied by 4. |
| 1.3.6.1.4.1.11.2.29.29 | ScalarrlBrgMacHashFunction | read-only | current | Current depth of the MAC address hashing Table |
| 1.3.6.1.4.1.11.2.29.30 | ScalarrlBrgMacHashFunctionAfterReset | read-write | current | Defines hash function vlan random mac random vlan sequntial mac sequential vlan sequential mac random vlan random mac sequntial |