HPE-rlMacMulticast-MIB
128 objects
No module-level DESCRIPTION found.
Imported Objects
| HPE-DEVICEPARAMS-MIB | rndErrorDesc rndErrorSeverity |
| HPE-MIB | nm rlMacMulticast rndNotifications |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetVersion |
| Q-BRIDGE-MIB | PortList VlanIndex |
| SNMPv2-SMI | IpAddress NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.0.208 | NotificationrlIgmpMldSnoopTriplePlayPort | current | Informational trap indicating that a query was recieved on a triple play port. | |
| 1.3.6.1.4.1.11.2.0.227 | NotificationrlbrgIgmpSnoopQrrDuplicateIP | current | Warning trap indicating that duplicate ip\ipv6 address occured between two queries | |
| 1.3.6.1.4.1.11.2.1 | NoderlMacMulticastUnregFilterFailed | Warning trap indicating - Setting Mac Unregistered Filtering on port is failed. The bound variable rndErrorDesc provides the interface number. | ||
| 1.3.6.1.4.1.11.2.55.1 | ScalarrlMacMulticastEnable | read-write | current | Enable/Disable MAC Multicast bridging in the device. |
| 1.3.6.1.4.1.11.2.55.2 | NoderlIgmpSnoop | |||
| 1.3.6.1.4.1.11.2.55.2.1 | ScalarrlIgmpSnoopMibVersion | read-only | current | MIB's version, the current version is 3. IGMP Snooping supports IGMPv3. |
| 1.3.6.1.4.1.11.2.55.2.2 | ScalarrlIgmpSnoopEnable | read-write | current | Enable/Disable IGMP Snooping in the switch. |
| 1.3.6.1.4.1.11.2.55.2.3 | ScalarrlIgmpSnoopHostAgingTime | read-write | obsolete | The amount of time that should pass before aging out an entry in the rlIgmpSnoopGroupTable will be aged out. |
| 1.3.6.1.4.1.11.2.55.2.4 | ScalarrlIgmpSnoopRouterAgingTime | read-write | obsolete | The amount of time that should pass before aging out an entry in the rlIgmpSnoopInterfaceTable will be aged out. |
| 1.3.6.1.4.1.11.2.55.2.7 | TablerlIgmpSnoopVlanTable | not-accessible | obsolete | The table listing the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports. |
| 1.3.6.1.4.1.11.2.55.2.7.1 | RowrlIgmpSnoopVlanEntry | not-accessible | obsolete | An entry (conceptual row) in the rlIgmpSnoopVlanTable. |
| 1.3.6.1.4.1.11.2.55.2.7.1.1 | ColumnrlIgmpSnoopVlanTag | read-only | obsolete | The tag of the VLAN for which this entry contains information for an IP Multicast Router. |
| 1.3.6.1.4.1.11.2.55.2.7.1.2 | ColumnrlIgmpSnoopVlanEnable | read-write | obsolete | Enable/Disable IGMP Snooping in the vlan. |
| 1.3.6.1.4.1.11.2.55.2.7.1.3 | ColumnrlIgmpSnoopVlanRouterLearn | read-write | obsolete | Enable/Disable of Learning of routers in the vlan. |
| 1.3.6.1.4.1.11.2.55.2.7.1.4 | ColumnrlIgmpSnoopVlanHostTimeOut | read-write | obsolete | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. |
| 1.3.6.1.4.1.11.2.55.2.7.1.5 | ColumnrlIgmpSnoopVlanQuerierTimeOut | read-write | obsolete | The amount of time where no query is heard until querier is activated |
| 1.3.6.1.4.1.11.2.55.2.7.1.6 | ColumnrlIgmpSnoopVlanRouterTimeOut | read-write | obsolete | The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. |
| 1.3.6.1.4.1.11.2.55.2.7.1.7 | ColumnrlIgmpSnoopVlanLeaveTimeOut | read-write | obsolete | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the… |
| 1.3.6.1.4.1.11.2.55.2.7.1.8 | ColumnrlIgmpSnoopVlanIgmpVersion | read-only | obsolete | The current IGMP protocol version running on the VLAN. |
| 1.3.6.1.4.1.11.2.55.2.7.1.9 | ColumnrlIgmpSnoopVlanRouterPortlist | read-only | obsolete | List of router ports learned dynamically on this VLAN from PIM, DVMRP, MRDISC and IGMP Query messages |
| 1.3.6.1.4.1.11.2.55.2.8 | ScalarrlIgmpSnoopIGMP224ReportsHandle | read-write | current | This varaiable indicates whether to allow IGMP reports for groups in the 224.0.0.X range when the group address is already manually configured or to ignore. |
| 1.3.6.1.4.1.11.2.55.2.10 | TablerlIgmpSnoopMulticastTvTable | not-accessible | current | multicast vlan used for this port |
| 1.3.6.1.4.1.11.2.55.2.10.1 | RowrlIgmpSnoopMulticastTvEntry | not-accessible | current | entry of multicast ip |
| 1.3.6.1.4.1.11.2.55.2.10.1.1 | ColumnrlIgmpSnoopMulticastTvVID | read-only | current | Specify the multicast ip to be used. |
| 1.3.6.1.4.1.11.2.55.2.10.1.2 | ColumnrlIgmpSnoopMulticastTvGroup | read-only | current | Specify the multicast ip to be used. |
| 1.3.6.1.4.1.11.2.55.2.10.1.3 | ColumnrlIgmpSnoopMulticastTvStatus | read-write | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.11.2.55.2.10.1.4 | ColumnrlIgmpSnoopMulticastTvCount | read-write | current | The number of addresses starting with rlIgmpSnoopMulticastTvGroup. |
| 1.3.6.1.4.1.11.2.55.2.11 | TablerlIgmpSnoopMembershipTable | not-accessible | current | The table listing the IP multicast memberships. |
| 1.3.6.1.4.1.11.2.55.2.11.1 | RowrlIgmpSnoopMembershipEntry | not-accessible | current | An entry (conceptual row) in the rlIgmpSnoopMembershipTable. |
| 1.3.6.1.4.1.11.2.55.2.11.1.1 | ColumnrlIgmpSnoopMembershipVlanTag | read-only | current | The VLAN tag for which this entry contains multicast membership information. |
| 1.3.6.1.4.1.11.2.55.2.11.1.2 | ColumnrlIgmpSnoopMembershipGroupIpAddress | read-only | current | The multicast group address. |
| 1.3.6.1.4.1.11.2.55.2.11.1.3 | ColumnrlIgmpSnoopMembershipSourceIpAddress | read-only | current | The unicast source address. |
| 1.3.6.1.4.1.11.2.55.2.11.1.4 | ColumnrlIgmpSnoopMembershipIncPortlist | read-only | current | Included ports, where a report message was heard for the group (IGMP version 2|1) or group and source address (IGMP version 3). |
| 1.3.6.1.4.1.11.2.55.2.11.1.5 | ColumnrlIgmpSnoopMembershipExcPortlist | read-only | current | Excluded ports where an exclude report message was heard for the group and source address (IGMP version 3). |
| 1.3.6.1.4.1.11.2.55.2.11.1.6 | ColumnrlIgmpSnoopMembershipExpiryTime | read-only | obsolete | Time till entry will expire. |
| 1.3.6.1.4.1.11.2.55.2.11.1.7 | ColumnrlIgmpSnoopMembershipCompatibilityMode | read-only | current | IGMP group compatibility mode. |
| 1.3.6.1.4.1.11.2.55.2.12 | TablerlIgmpSnoopQuerierVlanTable | not-accessible | current | A table that contains IGMP Snooping Querier information about every vlan. This is indexed by vlan tag. |
| 1.3.6.1.4.1.11.2.55.2.12.1 | RowrlIgmpSnoopQuerierVlanEntry | not-accessible | current | An entry (conceptual row) in the rlIgmpSnoopQuerierVlanTable. |
| 1.3.6.1.4.1.11.2.55.2.12.1.1 | ColumnrlIgmpSnoopQuerierVlanTag | read-only | current | An IGMP Snoop Querier entry vlan tag. |
| 1.3.6.1.4.1.11.2.55.2.12.1.2 | ColumnrlIgmpSnoopQuerierAdminEnable | read-write | current | The desired administrative state of IGMP Snoop Querier on the vlan. |
| 1.3.6.1.4.1.11.2.55.2.12.1.3 | ColumnrlIgmpSnoopQuerierOperEnable | read-only | current | The current operational state of IGMP Snoop Querier on the vlan. |
| 1.3.6.1.4.1.11.2.55.2.12.1.4 | ColumnrlIgmpSnoopQuerierAdminAddr | read-write | current | The desired IP address is being used in IGMP Snoop Querier messages on the vlan. |
| 1.3.6.1.4.1.11.2.55.2.12.1.5 | ColumnrlIgmpSnoopQuerierOperAddr | read-only | current | The current operational IP address is being used in IGMP Snoop Querier messages on the vlan. |
| 1.3.6.1.4.1.11.2.55.2.12.1.6 | ColumnrlIgmpSnoopQuerierAdminVersionNumber | read-write | current | The highest version number of IGMP Snoop Querier for the vlan. |
| 1.3.6.1.4.1.11.2.55.2.12.1.7 | ColumnrlIgmpSnoopQuerierOperVersionNumber | read-only | current | The current operational version number of IGMP Snoop Querier for the vlan. |
| 1.3.6.1.4.1.11.2.55.2.12.1.8 | ColumnrlIgmpSnoopQuerierElectionEnable | read-write | current | Whether or not to participate in querier election. When true, the snooping querier participates in querier election. When false, the snooping querier is the el… |
| 1.3.6.1.4.1.11.2.55.2.13 | ScalarrlIgmpSnoopQuerierEnable | read-write | current | Globally enable/disable IGMP Snooping Querier in the switch. |
| 1.3.6.1.4.1.11.2.55.3 | ScalarrlMacMulticastMaxEntriesNum | read-only | current | The maximum number of Mac Multicast entries the device supports. |
| 1.3.6.1.4.1.11.2.55.4 | NoderlMacMulticastFilter | |||
| 1.3.6.1.4.1.11.2.55.4.1 | ScalarrlMacMulticastUnregFilterEnable | read-write | current | Each bit represent a port whether Unregistered Multicast Filtering enable |
| 1.3.6.1.4.1.11.2.55.5 | NoderlMldSnoop | |||
| 1.3.6.1.4.1.11.2.55.5.1 | ScalarrlMldSnoopEnable | read-write | current | Enable/Disable Mld Snooping in the switch. |
| 1.3.6.1.4.1.11.2.55.5.2 | ScalarrlMldSnoopHostAgingTime | read-write | obsolete | The amount of time that should pass before aging out an entry in the rlMldSnoopGroupTable will be aged out. |
| 1.3.6.1.4.1.11.2.55.5.3 | ScalarrlMldSnoopRouterAgingTime | read-write | obsolete | The amount of time that should pass before aging out an entry in the rlMldSnoopInterfaceTable will be aged out. |
| 1.3.6.1.4.1.11.2.55.5.4 | TablerlIgmpMldSnoopMembershipTable | not-accessible | current | The table listing the IP multicast memberships. |
| 1.3.6.1.4.1.11.2.55.5.4.1 | RowrlIgmpMldSnoopMembershipEntry | not-accessible | current | An entry (conceptual row) in the rlIgmpMldSnoopMembershipTable. |
| 1.3.6.1.4.1.11.2.55.5.4.1.1 | ColumnrlIgmpMldSnoopMembershipVlanTag | read-only | current | The VLAN tag for which this entry contains multicast membership information. |
| 1.3.6.1.4.1.11.2.55.5.4.1.2 | ColumnrlIgmpMldSnoopMembershipGroupIpAddressType | read-only | current | Inet type IPv4/IPv6. |
| 1.3.6.1.4.1.11.2.55.5.4.1.3 | ColumnrlIgmpMldSnoopMembershipGroupIpAddress | read-only | current | The multicast group address. |
| 1.3.6.1.4.1.11.2.55.5.4.1.4 | ColumnrlIgmpMldSnoopMembershipSourceIpAddressType | read-only | current | Inet type IPv4/IPv6. |
| 1.3.6.1.4.1.11.2.55.5.4.1.5 | ColumnrlIgmpMldSnoopMembershipSourceIpAddress | read-only | current | The unicast source address. |
| 1.3.6.1.4.1.11.2.55.5.4.1.6 | ColumnrlIgmpMldSnoopMembershipIncPortlist | read-only | current | Included ports, where a report message was heard for the group (IGMPv2/V1 or MLDv1) or group and source address (IGMPv3/MLDv2). |
| 1.3.6.1.4.1.11.2.55.5.4.1.7 | ColumnrlIgmpMldSnoopMembershipExcPortlist | read-only | current | list of excluded ports to which an exclude report message was heard for the group and source address (IGMPv3/MLDv2 ). |
| 1.3.6.1.4.1.11.2.55.5.4.1.8 | ColumnrlIgmpMldSnoopMembershipExpiryTime | read-only | obsolete | Time till entry will expire. |
| 1.3.6.1.4.1.11.2.55.5.4.1.9 | ColumnrlIgmpMldSnoopMembershipCompatibilityMode | read-only | current | IGMP/MLD group compatibility mode. |
| 1.3.6.1.4.1.11.2.55.5.5 | TablerlIgmpMldSnoopVlanTable | not-accessible | current | The table lists the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports. |
| 1.3.6.1.4.1.11.2.55.5.5.1 | RowrlIgmpMldSnoopVlanEntry | not-accessible | current | An entry (conceptual row) in the rlIgmpSnoopVlanTable. |
| 1.3.6.1.4.1.11.2.55.5.5.1.1 | ColumnrlIgmpMldSnoopVlanInetAddressType | read-only | current | Inet type ipv6/ipv4. |
| 1.3.6.1.4.1.11.2.55.5.5.1.2 | ColumnrlIgmpMldSnoopVlanTag | read-only | current | The tag of the VLAN for which this entry contains information for an IP Multicast Router. |
| 1.3.6.1.4.1.11.2.55.5.5.1.3 | ColumnrlIgmpMldSnoopVlanEnable | read-write | current | Enable/Disable IGMP Snooping in the vlan. |
| 1.3.6.1.4.1.11.2.55.5.5.1.4 | ColumnrlIgmpMldSnoopVlanRouterLearn | read-write | current | Enable/Disable of Learning of routers in the vlan. |
| 1.3.6.1.4.1.11.2.55.5.5.1.5 | ColumnrlIgmpMldSnoopVlanHostTimeOut | read-write | obsolete | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. |
| 1.3.6.1.4.1.11.2.55.5.5.1.6 | ColumnrlIgmpMldSnoopVlanQuerierTimeOut | read-write | obsolete | The amount of time where no query is heard until querier is activated |
| 1.3.6.1.4.1.11.2.55.5.5.1.7 | ColumnrlIgmpMldSnoopVlanRouterTimeOut | read-write | obsolete | The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. |
| 1.3.6.1.4.1.11.2.55.5.5.1.8 | ColumnrlIgmpMldSnoopVlanLeaveTimeOut | read-write | obsolete | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the… |
| 1.3.6.1.4.1.11.2.55.5.5.1.9 | ColumnrlIgmpMldSnoopVlanIgmpVersion | read-only | current | The current IGMP protocol version running on the VLAN. |
| 1.3.6.1.4.1.11.2.55.5.5.1.10 | ColumnrlIgmpMldSnoopVlanRouterPortlist | read-only | current | List of router ports learned dynamically from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLAN |
| 1.3.6.1.4.1.11.2.55.5.5.1.11 | ColumnrlIgmpMldSnoopVlanRouterStaticPortlist | read-write | current | List of router ports configured statically on this VLAN. |
| 1.3.6.1.4.1.11.2.55.5.5.1.12 | ColumnrlIgmpMldSnoopVlanRouterForbiddenPortlist | read-write | current | List of ports statically configured to NOT be router ports on this VLAN |
| 1.3.6.1.4.1.11.2.55.5.5.1.13 | ColumnrlIgmpMldSnoopVlanQueryOverride | read-write | current | Enable/Disable overriding of Query values |
| 1.3.6.1.4.1.11.2.55.5.5.1.14 | ColumnrlIgmpMldSnoopVlanOperRobustness | read-only | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. … |
| 1.3.6.1.4.1.11.2.55.5.5.1.15 | ColumnrlIgmpMldSnoopVlanOperQueryInterval | read-only | current | The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value. |
| 1.3.6.1.4.1.11.2.55.5.5.1.16 | ColumnrlIgmpMldSnoopVlanOperQueryMaxResponseTime | read-only | current | The maximum query response interval advertised in MGMDv2 or v3 queries on this interface. |
| 1.3.6.1.4.1.11.2.55.5.5.1.17 | ColumnrlIgmpMldSnoopVlanOperLastMemberQueryInterval | read-only | current | The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also th… |
| 1.3.6.1.4.1.11.2.55.5.5.1.18 | ColumnrlIgmpMldSnoopVlanOperLastMemberQueryCount | read-only | current | Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members. |
| 1.3.6.1.4.1.11.2.55.5.5.1.19 | ColumnrlIgmpMldSnoopVlanOperStartupQueryInterval | read-only | current | This variable represents the interval between General Queries sent by a Querier on startup. |
| 1.3.6.1.4.1.11.2.55.5.5.1.20 | ColumnrlIgmpMldSnoopVlanOperStartupQueryCount | read-only | current | Represents the number of Queries sent out on startup separated by the Startup Query Interval. |
| 1.3.6.1.4.1.11.2.55.5.5.1.21 | ColumnrlIgmpMldSnoopVlanOperHostTimeOut | read-only | current | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIg… |
| 1.3.6.1.4.1.11.2.55.5.5.1.22 | ColumnrlIgmpMldSnoopVlanOperRouterTimeOut | read-only | current | The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * r… |
| 1.3.6.1.4.1.11.2.55.5.5.1.23 | ColumnrlIgmpMldSnoopVlanOperLeaveTimeOut | read-only | current | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the… |
| 1.3.6.1.4.1.11.2.55.5.5.1.24 | ColumnrlIgmpMldSnoopVlanAdminRobustness | read-write | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. … |
| 1.3.6.1.4.1.11.2.55.5.5.1.25 | ColumnrlIgmpMldSnoopVlanAdminQueryInterval | read-write | current | The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value. |
| 1.3.6.1.4.1.11.2.55.5.5.1.26 | ColumnrlIgmpMldSnoopVlanAdminQueryMaxResponseTime | read-write | current | The maximum query response interval advertised in MGMDv2 or v3 queries on this interface. |
| 1.3.6.1.4.1.11.2.55.5.5.1.27 | ColumnrlIgmpMldSnoopVlanAdminLastMemberQueryInterval | read-write | current | The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also th… |
| 1.3.6.1.4.1.11.2.55.5.5.1.28 | ColumnrlIgmpMldSnoopVlanAdminLastMemberQueryCount | read-write | current | Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members. Value 0 is used … |
| 1.3.6.1.4.1.11.2.55.5.5.1.29 | ColumnrlIgmpMldSnoopVlanAdminStartupQueryInterval | read-write | current | This variable represents the interval between General Queries sent by a Querier on startup. |
| 1.3.6.1.4.1.11.2.55.5.5.1.30 | ColumnrlIgmpMldSnoopVlanAdminStartupQueryCount | read-write | current | Represents the number of Queries sent out on startup separated by the Startup Query Interval. |
| 1.3.6.1.4.1.11.2.55.5.5.1.31 | ColumnrlIgmpMldSnoopVlanAdminHostTimeOut | read-write | obsolete | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlI… |
| 1.3.6.1.4.1.11.2.55.5.5.1.32 | ColumnrlIgmpMldSnoopVlanAdminRouterTimeOut | read-write | obsolete | The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * … |
| 1.3.6.1.4.1.11.2.55.5.5.1.33 | ColumnrlIgmpMldSnoopVlanAdminLeaveTimeOut | read-write | obsolete | The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the… |
| 1.3.6.1.4.1.11.2.55.5.5.1.34 | ColumnrlIgmpMldSnoopVlanIsImmediateLeave | read-write | current | Enable/Disable immediate leave on this Vlan |
| 1.3.6.1.4.1.11.2.55.5.6 | TablerlIgmpMldSnoopMulticastTvTable | not-accessible | current | multicast vlan used for this port |
| 1.3.6.1.4.1.11.2.55.5.6.1 | RowrlIgmpMldSnoopMulticastTvEntry | not-accessible | current | entry of multicast ip |
| 1.3.6.1.4.1.11.2.55.5.6.1.1 | ColumnrlIgmpMldSnoopMulticastTvInetAddressType | read-only | current | Inet type ipv6/ipv4. |
| 1.3.6.1.4.1.11.2.55.5.6.1.2 | ColumnrlIgmpMldSnoopMulticastTvVID | read-only | current | Specify the multicast ip to be used. |
| 1.3.6.1.4.1.11.2.55.5.6.1.3 | ColumnrlIgmpMldSnoopMulticastTvGroupAddressType | read-only | current | Inet type ipv6/ipv4. |
| 1.3.6.1.4.1.11.2.55.5.6.1.4 | ColumnrlIgmpMldSnoopMulticastTvGroup | read-only | current | Specify the multicast ip to be used. |
| 1.3.6.1.4.1.11.2.55.5.6.1.5 | ColumnrlIgmpMldSnoopMulticastTvStatus | read-write | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.11.2.55.5.7 | TablerlMldSnoopQuerierVlanTable | not-accessible | current | A table that contains MLD Snooping Querier information about every vlan. This is indexed by vlan tag. |
| 1.3.6.1.4.1.11.2.55.5.7.1 | RowrlMldSnoopQuerierVlanEntry | not-accessible | current | An entry (conceptual row) in the rlMldSnoopQuerierVlanTable. |
| 1.3.6.1.4.1.11.2.55.5.7.1.1 | ColumnrlMldSnoopQuerierVlanTag | read-only | current | An MLD Snoop Querier entry vlan tag. |
| 1.3.6.1.4.1.11.2.55.5.7.1.2 | ColumnrlMldSnoopQuerierAdminEnable | read-write | current | The desired administrative state of MLD Snoop Querier on the vlan. |
| 1.3.6.1.4.1.11.2.55.5.7.1.3 | ColumnrlMldSnoopQuerierOperEnable | read-only | current | The current operational state of MLD Snoop Querier on the vlan. |
| 1.3.6.1.4.1.11.2.55.5.7.1.4 | ColumnrlMldSnoopQuerierAdminAddrInetAddressType | read-only | current | Inet type IPv6/IPv4. |
| 1.3.6.1.4.1.11.2.55.5.7.1.5 | ColumnrlMldSnoopQuerierAdminAddr | read-write | current | The desired IP address is being used in MLD Snoop Querier messages on the vlan. |
| 1.3.6.1.4.1.11.2.55.5.7.1.6 | ColumnrlMldSnoopQuerierOperAddrInetAddressType | read-only | current | Inet type IPv6/IPv4. |
| 1.3.6.1.4.1.11.2.55.5.7.1.7 | ColumnrlMldSnoopQuerierOperAddr | read-only | current | The current operational IP address is being used in MLD Snoop Querier messages on the vlan. |
| 1.3.6.1.4.1.11.2.55.5.7.1.8 | ColumnrlMldSnoopQuerierAdminVersionNumber | read-write | current | The highest version number of MLD Snoop Querier for the vlan. |
| 1.3.6.1.4.1.11.2.55.5.7.1.9 | ColumnrlMldSnoopQuerierOperVersionNumber | read-only | current | The current operational version number of MLD Snoop Querier for the vlan. |
| 1.3.6.1.4.1.11.2.55.5.7.1.10 | ColumnrlMldSnoopQuerierElectionEnable | read-write | current | Whether or not to participate in querier election. When true, the snooping querier participates in querier election. When false, the snooping querier is the el… |
| 1.3.6.1.4.1.11.2.55.5.8 | ScalarrlMldSnoopQuerierEnable | read-write | current | Globally enable/disable MLD Snooping Querier in the switch. |
| 1.3.6.1.4.1.11.2.55.5.9 | TablerlIgmpMldSnoopQuerierGlobalAddressTable | not-accessible | current | A table that contains IGMP/MLD Snooping Querier global address. |
| 1.3.6.1.4.1.11.2.55.5.9.1 | RowrlIgmpMldSnoopQuerierGlobalAddressEntry | not-accessible | current | An entry (conceptual row) in the rlIgmpMldSnoopQuerierGlobalAddressTable. |
| 1.3.6.1.4.1.11.2.55.5.9.1.1 | ColumnrlIgmpMldSnoopQuerierGlobalAddressIPVersion | not-accessible | current | The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g., IPv4 and IPv6; however, the traffic is consi… |
| 1.3.6.1.4.1.11.2.55.5.9.1.2 | ColumnrlIgmpMldSnoopQuerierGlobalAddressType | read-only | current | Inet type IPv6/IPv4. |
| 1.3.6.1.4.1.11.2.55.5.9.1.3 | ColumnrlIgmpMldSnoopQuerierGlobalAddress | read-write | current | The desired address to used in IGMP/MLD Snoop Querier messages if such an address is not configured on the vlan. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IgmpVersion | INTEGER { none(0), v1(1), v2(2), v3(3) } | current | IGMP version. |
| MldVersion | INTEGER { none(0), v1(1), v2(2) } | current | MLD version. |