HPICF-IPSLA-MIB
233 objects
This MIB module contains HP proprietary objects for managing IP Service Level Agreement (SLA).
Imported Objects
| HP-ICF-OID | hpSwitch |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.127 | IdentityhpicfIpSla | This MIB module contains HP proprietary objects for managing IP Service Level Agreement (SLA). | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.127.0 | NodehpicfIpSlaNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.127.0.1 | NotificationhpicfIpSlaThresholdexceeded | current | This notification is generated when the metric calculated from the SLA result exceeds the configured threshold value. The hpicfIpSlaThrUpper is not applicable … | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.0.2 | NotificationhpicfIpSlaTestCompletion | current | This notification is generated when the SLA test is completed either by reaching stopTime or hpicfIpSlaAttrNumPkts. This notification is sent only when the act… | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.0.3 | NotificationhpicfIpSlaThresholdPktLoss | current | This notification is generated when SLA test probe reply packets are lost consecutively for the configured number of hpicfIpSlaThrCount. This notification is s… | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1 | NodehpicfIpSlaObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1 | TablehpicfIpSlaTable | not-accessible | current | This table specifies IP SLA test parameters as SLA entries. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1 | RowhpicfIpSlaEntry | not-accessible | current | An entry on this table specifies the destination IP address/ Hostname, Source address, Source Interface ID & Row status corresponding to each SLA test. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.1 | ColumnhpicfIpSlaID | not-accessible | current | This is an identifier for the IP SLA. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.2 | ColumnhpicfIpSlaType | read-create | current | SLA Probe Type. IcmpEcho is similar to ping protocol and the destination should be enabled with responder functionality for udpEcho, udpJitter, udpJitterVoIP a… |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.3 | ColumnhpicfIpSlaAdminState | read-create | current | Enable or disable the IP Service Level Agreement (SLA) probe. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.4 | ColumnhpicfIpSlaSourceAddressType | read-create | current | SLA source address type. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.5 | ColumnhpicfIpSlaSourceAddress | read-create | current | SLA source address. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.6 | ColumnhpicfIpSlaL4SourcePort | read-create | current | SLA source port to be used for SLA probes that use a transport layer such as udpEcho, udpJitter, udpJitterVoIP and tcpConnect. The allowed range is from 1024 t… |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.7 | ColumnhpicfIpSlaSourceInterface | read-create | current | SLA source interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.8 | ColumnhpicfIpSlaDestAddressType | read-create | current | SLA destination address type. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.9 | ColumnhpicfIpSlaDestAddress | read-create | current | SLA destination address. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.10 | ColumnhpicfIpSlaL4DestPort | read-create | current | Port on target device which responds back to the probe. This is used for SLA probes that use a transport layer such as udpEcho, udpJitter, udpJitterVoIP and tc… |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.11 | ColumnhpicfIpSlaRowStatus | read-create | current | SLA row status. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2 | TablehpicfIpSlaAttrTable | not-accessible | current | This table specifies IP SLA test parameters as SLA entries. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1 | RowhpicfIpSlaAttrEntry | not-accessible | current | An entry on this table specifies the attributes of SLA test such as scheduling parameters, TOS, payload size, history bucket size and inter packet interval, co… |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.1 | ColumnhpicfIpSlaSchedStartTime | read-create | current | Timestamp to denote when to start this SLA probe. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.2 | ColumnhpicfIpSlaSchedEndTime | read-create | current | Timestamp to denote when to end this SLA probe. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.3 | ColumnhpicfIpSlaSchedFreq | read-create | current | Frequency in seconds. This value is used to send probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.4 | ColumnhpicfIpSlaSchedRepeat | read-create | current | Number of times this test will be repeated. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.5 | ColumnhpicfIpSlaAttrTOS | read-create | current | Type of service value to be set for the probe packet. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.6 | ColumnhpicfIpSlaAttrHistorySize | read-create | current | Number of history records to be maintained for SLA test. Size can vary from 1 to 50. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.7 | ColumnhpicfIpSlaAttrPayloadSize | read-create | current | Size of the packet payload to be sent out for each probe. It can be set from 0 to 1440 for udpEcho, icmpEcho and from 68 to 8100 for udpJitter. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.8 | ColumnhpicfIpSlaAttrNumPkts | read-create | current | Number of packets to be sent out for a single probe for jitter SLA type. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.9 | ColumnhpicfIpSlaAttrPktInterval | read-create | current | Inter packet interval in milli seconds. Which is to be used for packets that are sent out for a single probe for jitter SLA type. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.10 | ColumnhpicfIpSlaAttrRowStatus | read-create | current | SLA attribute row status. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.11 | ColumnhpicfIpSlaAttrCodecType | read-create | current | Codec-type for the VoIP SLA test. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.12 | ColumnhpicfIpSlaAttrAdvntgFactr | read-create | current | Advantage factor to calculate the MOS and ICPIF values for VoIP SLA type. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.3 | TablehpicfIpSlaThrTable | not-accessible | current | This table specifies IP SLA threshold-action parameters as entries. When one of the monitored parameters of an SLA test goes beyond the configured thresholds, … |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1 | RowhpicfIpSlaThrEntry | not-accessible | current | An entry on this table specifies the Metric type, upper and lower limit of thresholds, threshold type and action to be taken. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.1 | ColumnhpicfIpSlaThrMetricType | not-accessible | current | SLA metric type to be monitored. The rtt type is the round trip time of the probe packet. The jitter type is the inter-packet delay variance. The srcTodstTime … |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.2 | ColumnhpicfIpSlaThrUpper | read-create | current | Acceptable upper-limit of threshold value for SLA. This value is not applicable when hpicfIpSlaThrMetricType is set to packetLoss and testCompletion. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.3 | ColumnhpicfIpSlaThrLower | read-create | current | Acceptable lower-limit of threshold value for SLA. This value is not applicable when hpicfIpSlaThrMetricType is set to packetLoss and testCompletion. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.4 | ColumnhpicfIpSlaThrType | read-create | current | Configure threshold type to trigger action. When a trap/log has to be generated each time the threshold is breached, immediate threshold type can be used. The … |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.5 | ColumnhpicfIpSlaThrCount | read-create | current | The value for the number of consecutive times the upper or lower limit of the threshold is violated. For example, this can be configured to trigger a trap/log … |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.6 | ColumnhpicfIpSlaThrAction | read-create | current | The number of probe packets used to calculate Round Trip Time for jitter test. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.7 | ColumnhpicfIpSlaThrRowStatus | read-create | current | Threshold table row status. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.4 | TablehpicfIpSlaRespTable | not-accessible | current | This table specifies IP SLA responder parameters as entries. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1 | RowhpicfIpSlaRespEntry | not-accessible | current | An entry on this table specifies the local IP address, port number and row status corresponding to each SLA responder config. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.1 | ColumnhpicfIpSlaRespType | not-accessible | current | The SLA responder type. The udpEcho and tcpConnect objects are for UDP and TCP packets, respectively. The udpJitter and udpJitterVoIP values calculate one-way … |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.2 | ColumnhpicfIpSlaRespAddressType | read-create | current | SLA responder IP address type. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.3 | ColumnhpicfIpSlaRespAddress | not-accessible | current | The local IP address to which the responder is bound. This is one of the indexes for the hpicfIpSlaRespTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.4 | ColumnhpicfIpSlaRespL4Port | not-accessible | current | L4 port number on hpicfIpSlaRespAddress where the responder listens for probe packets from SLA source. This is one of the indexes for the hpicfIpSlaRespTable. … |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.5 | ColumnhpicfIpSlaRespRowStatus | read-create | current | SLA responder row status. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5 | TablehpicfIpSlaMsgTable | not-accessible | current | This table specifies the IP SLA result parameters as entries. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1 | RowhpicfIpSlaMsgEntry | not-accessible | current | An entry on this table specifies the probe received time, probe error counters and threshold hit counter. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.1 | ColumnhpicfIpSlaMsgLastProbeRcvd | read-only | current | Last probe received time. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.2 | ColumnhpicfIpSlaMsgLastClrRec | read-only | current | Last clear record done time. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.3 | ColumnhpicfIpSlaMsgSuccProbe | read-only | current | Number of successful probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.4 | ColumnhpicfIpSlaMsgIntErr | read-only | current | Internal error count. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.5 | ColumnhpicfIpSlaMsgLocIntfDown | read-only | current | Number of probes failed due to local interface failure. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.6 | ColumnhpicfIpSlaMsgResTimeout | read-only | current | Resolution timed out. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.7 | ColumnhpicfIpSlaMsgDNSFormatErr | read-only | current | Number of DNS format errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.8 | ColumnhpicfIpSlaMsgServerFaild | read-only | current | Number of server failed errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.9 | ColumnhpicfIpSlaMsgDomainNotExist | read-only | current | Number of domain does not exist errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.10 | ColumnhpicfIpSlaMsgFunctnNotImpl | read-only | current | Number of function not implemented errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.11 | ColumnhpicfIpSlaMsgServerRefusd | read-only | current | Number of server refused errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.12 | ColumnhpicfIpSlaMsgNameNotExist | read-only | current | Number of name does not exist errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.13 | ColumnhpicfIpSlaMsgRRsetNotExist | read-only | current | Number of RRset that should not exist errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.14 | ColumnhpicfIpSlaMsgServerNotInZone | read-only | current | Number of server not in the zone errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.15 | ColumnhpicfIpSlaMsgNameNotInZone | read-only | current | Number of name not in the zone errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.16 | ColumnhpicfIpSlaMsgDHCPFaildResln | read-only | current | Number of DHCP failed resolutions. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.17 | ColumnhpicfIpSlaMsgOffrNotRecvd | read-only | current | Number of DHCP offer not received errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.18 | ColumnhpicfIpSlaMsgNACKRecvd | read-only | current | Number of NACKs received. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.19 | ColumnhpicfIpSlaMsgThrHitRTT | read-only | current | Number of round-trip time hits to threshold. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.20 | ColumnhpicfIpSlaMsgStatus | read-only | current | IP SLA current running status. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.21 | ColumnhpicfIpSlaMsgNxtSched | read-only | current | Next scheduled time of IP SLA probe. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.22 | ColumnhpicfIpSlaMsgThrHitPostvSDAvg | read-only | current | The average positive jitter value of packets moving from source to destination that cross the threshold. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.23 | ColumnhpicfIpSlaMsgThrHitPostvDSAvg | read-only | current | The average positive jitter value of packets moving from destination to source that cross the threshold. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.24 | ColumnhpicfIpSlaMsgThrHitOneWayDSAvg | read-only | current | The average time taken by packets moving from destination to source that cross the threshold. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.25 | ColumnhpicfIpSlaMsgThrHitOneWaySDAvg | read-only | current | The average time taken by packets moving from source to destination that cross the threshold. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.26 | ColumnhpicfIpSlaMsgThrHitAvgICPIF | read-only | current | Average value of the ICPIF of packets that cross the threshold. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.27 | ColumnhpicfIpSlaMsgThrHitAvgMOS | read-only | current | Average value of the MOS of packets that cross the threshold. The Value of this object is 100 times of the actual value. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.28 | ColumnhpicfIpSlaMsgNameServUnreach | read-only | current | Number of errors due to name server being unreachable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.29 | ColumnhpicfIpSlaMsgDHCPReleaseErr | read-only | current | Number of DHCP release errors. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.30 | ColumnhpicfIpSlaMsgThrHitPktLoss | read-only | current | Number of packet loss for each probe. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.31 | ColumnhpicfIpSlaMsgDstUnreach | read-only | current | Number of probes failed due to destination not being reachable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.32 | ColumnhpicfIpSlaMsgProbeSkpd | read-only | current | Number of probes skipped due to DNS resolution delay. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.33 | ColumnhpicfIpSlaMsgDNSResolnFailed | read-only | current | Number of times DNS resolution failed. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.34 | ColumnhpicfIpSlaMsgNoRoutetoTgt | read-only | current | Number of errors due to no route to target. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.35 | ColumnhpicfIpSlaMsgUnbleToConctHost | read-only | current | Number of errors due to no host connectivity. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.36 | ColumnhpicfIpSlaMsgSuccConnection | read-only | current | Number of successful connections. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.37 | ColumnhpicfIpSlaMsgPossTrailDropped | read-only | current | Number of probes dropped due to resource unavailability. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.38 | ColumnhpicfIpSlaMsgNoRespFrmTgt | read-only | current | Number of errors due to no response from target. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.5.1.39 | ColumnhpicfIpSlaMsgProbeRespRecvd | read-only | current | Number of probes received. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6 | TablehpicfIpSlaHistTable | not-accessible | current | This table specifies the history of IP SLA result. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1 | RowhpicfIpSlaHistEntry | not-accessible | current | An entry on this table specifies the minimum, maximum and the average time taken from source to destination and vice versa. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.1 | ColumnhpicfIpSlaHistMinRTT | read-only | current | The minimum probe round-trip time. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.2 | ColumnhpicfIpSlaHistMaxRTT | read-only | current | The maximum probe round-trip time. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.3 | ColumnhpicfIpSlaHistAvgRTT | read-only | current | The average probe round-trip time. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.4 | ColumnhpicfIpSlaHistTotalRTT | read-only | current | The total probe round-trip time. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.5 | ColumnhpicfIpSlaHistRTT2 | read-only | current | The sum of the squares of round-trip time. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.6 | ColumnhpicfIpSlaHistNumOfRTT | read-only | current | The number of RTTs that are successfully measured. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.7 | ColumnhpicfIpSlaHistProbID | read-only | current | Probe ID number. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.8 | ColumnhpicfIpSlaHistLastSuccProbTime | read-only | current | Last success probe time. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.9 | ColumnhpicfIpSlaHistPacketLoss | read-only | current | The packet loss value during the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.10 | ColumnhpicfIpSlaHistSentPktNum | read-only | current | Number of packets sent to responder. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.11 | ColumnhpicfIpSlaHistRecvdPktNum | read-only | current | Number of packets received from responder. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.12 | ColumnhpicfIpSlaHistMinStoDPostv | read-only | current | The minimal positive jitter value recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.13 | ColumnhpicfIpSlaHistMaxStoDPostv | read-only | current | The maximum positive jitter value recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.14 | ColumnhpicfIpSlaHistNumOfPosSD | read-only | current | Number of times the source to destination jitter has a positive value. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.15 | ColumnhpicfIpSlaHistSumOfPosSD | read-only | current | The sum of positive jitter values recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.16 | ColumnhpicfIpSlaHistAvgStoDPostv | read-only | current | The average positive jitter value recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.17 | ColumnhpicfIpSlaHistSum2PositivesSD | read-only | current | The sum of square of positive jitter values recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.18 | ColumnhpicfIpSlaHistMinDtoSPostv | read-only | current | The minimal positive jitter value recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.19 | ColumnhpicfIpSlaHistMaxDtoSPostv | read-only | current | The maximum positive jitter value recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.20 | ColumnhpicfIpSlaHistNumOfPosDS | read-only | current | The positive jitter value recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.21 | ColumnhpicfIpSlaHistSumOfPosDS | read-only | current | The sum of positive jitter values recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.22 | ColumnhpicfIpSlaHistAvgDtoSPostv | read-only | current | The average positive jitter value recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.23 | ColumnhpicfIpSlaHistSum2PositivesDS | read-only | current | The sum of square of positive jitter values recorded from destination-to-source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.24 | ColumnhpicfIpSlaHistMinStoDNegtv | read-only | current | The minimal negative jitter value recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.25 | ColumnhpicfIpSlaHistMaxStoDNegtv | read-only | current | The maximum negative jitter value recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.26 | ColumnhpicfIpSlaHistNumOfNegSD | read-only | current | The number of negative jitter values recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.27 | ColumnhpicfIpSlaHistSumOfNegSD | read-only | current | The sum of negative jitter values recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.28 | ColumnhpicfIpSlaHistAvgStoDNegtv | read-only | current | The average negative jitter value recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.29 | ColumnhpicfIpSlaHistSum2NegativesSD | read-only | current | The sum of square of negative jitter values recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.30 | ColumnhpicfIpSlaHistMinDtoSNegtv | read-only | current | The minimal negative jitter value recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.31 | ColumnhpicfIpSlaHistMaxDtoSNegtv | read-only | current | The maximum negative jitter value recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.32 | ColumnhpicfIpSlaHistNumOfNegDS | read-only | current | The number of negative jitter values recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.33 | ColumnhpicfIpSlaHistSumOfNegDS | read-only | current | The negative jitter value recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.34 | ColumnhpicfIpSlaHistAvgDtoSNegtv | read-only | current | The average negative jitter value recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.35 | ColumnhpicfIpSlaHistSum2NegativesDS | read-only | current | The negative jitter value recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.36 | ColumnhpicfIpSlaHistMinStoDDelay | read-only | current | The minimum delay recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.37 | ColumnhpicfIpSlaHistMaxStoDDelay | read-only | current | The maximum delay recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.38 | ColumnhpicfIpSlaHistSumStoDDelay | read-only | current | The sum of all delays recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.39 | ColumnhpicfIpSlaHistNumOfDelaySD | read-only | current | The number of delays from source to destination that are successfully measured. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.40 | ColumnhpicfIpSlaHistSum2DelaySD | read-only | current | The sum of squares of all delays recorded from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.41 | ColumnhpicfIpSlaHistMinDtoSDelay | read-only | current | The minimum delay recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.42 | ColumnhpicfIpSlaHistMaxDtoSDelay | read-only | current | The maximum delay recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.43 | ColumnhpicfIpSlaHistNumOfDelayDS | read-only | current | The number of delays from destination to source that are successfully measured. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.44 | ColumnhpicfIpSlaHistSumDtoSDelay | read-only | current | The sum of all delays recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.45 | ColumnhpicfIpSlaHistSum2DelayDS | read-only | current | The sum of squares of all delays recorded from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.46 | ColumnhpicfIpSlaHistICPIF | read-only | current | The Calculated Planning Impairment Factor (ICPIF) value for the type-specified test. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.47 | ColumnhpicfIpSlaHistMOS | read-only | current | The Mean Opinion Score (MOS) value for the type-specified test. The Value of this object is 100 times of the actual value. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.48 | ColumnhpicfIpSlaHistAvgStoDDelay | read-only | current | The average one-way time from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.6.1.49 | ColumnhpicfIpSlaHistAvgDtoSDelay | read-only | current | The average one-way time from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.7 | TablehpicfIpSlaHistSummTable | not-accessible | current | This table specifies the history summary of IP SLA result. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1 | RowhpicfIpSlaHistSummEntry | not-accessible | current | An entry on this table specifies the minimum, maximum and the average time taken from source to destination and vice versa. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.1 | ColumnhpicfIpSlaHistSummIndx | not-accessible | current | This is an index for history summary. Its value can vary from 1 to 50. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.2 | ColumnhpicfIpSlaHistSummStartTime | read-only | current | Time at which the type-specified test was executed. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.3 | ColumnhpicfIpSlaHistSummStatus | read-only | current | The status of the IP SLA test. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.4 | ColumnhpicfIpSlaHistSummRTT | read-only | current | The round-trip time for a successfully measured test. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.5 | ColumnhpicfIpSlaHistSummResolvdIP | read-only | current | Resolved IP address. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.6 | ColumnhpicfIpSlaHistSummDescription | read-only | current | Error description. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.7 | ColumnhpicfIpSlaHistSummStoDDelay | read-only | current | Source to destination delay. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.7.1.8 | ColumnhpicfIpSlaHistSummDtoSDelay | read-only | current | Destination to source delay. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8 | TablehpicfIpSlaHistAggrTable | not-accessible | current | This table specifies the aggregate value of IP SLA result. The average value is calculating on last 25 probes. Or the calculation will do on the number of prob… |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1 | RowhpicfIpSlaHistAggrEntry | not-accessible | current | An entry on this table specifies aggregate value of minimum, maximum and the average time taken from source to destination and vice versa. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.1 | ColumnhpicfIpSlaHistAggrMinRTT | read-only | current | The minimum round-trip time for the last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.2 | ColumnhpicfIpSlaHistAggrMaxRTT | read-only | current | The maximum round-trip time for the last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.3 | ColumnhpicfIpSlaHistAggrNumOfRTT | read-only | current | The number of RTTs that are successfully measured for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.4 | ColumnhpicfIpSlaHistAggrAvgRTT | read-only | current | The average round-trip time of last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.5 | ColumnhpicfIpSlaHistAggrTotalRTT | read-only | current | The total round-trip time of last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.6 | ColumnhpicfIpSlaHistAggrRTT2 | read-only | current | The average of the sum of squares of RTTs for the last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.7 | ColumnhpicfIpSlaHistAggrFrstProbStTime | read-only | current | First probe start time. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.8 | ColumnhpicfIpSlaHistAggrProbFailReason | read-only | current | Probe failure reason. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.9 | ColumnhpicfIpSlaHistAggrPacketLoss | read-only | current | The percentage of packet loss in last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.10 | ColumnhpicfIpSlaHistAggrSentPktNum | read-only | current | The total number of packets sent. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.11 | ColumnhpicfIpSlaHistAggrRecvdPktNum | read-only | current | The total number of packets received. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.12 | ColumnhpicfIpSlaHistAggrMinStoDPostv | read-only | current | The minimum positive jitter value from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.13 | ColumnhpicfIpSlaHistAggrMaxStoDPostv | read-only | current | The maximum positive jitter value from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.14 | ColumnhpicfIpSlaHistAggrNumOfPosSD | read-only | current | The number of times source to destination jitter value became positive. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.15 | ColumnhpicfIpSlaHistAggrSumOfPosSD | read-only | current | The average of the sum of positive jitter value from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.16 | ColumnhpicfIpSlaHistAggrAvgStoDPostv | read-only | current | The average of the positive jitter value from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.17 | ColumnhpicfIpSlaHistAggrSum2PostvSD | read-only | current | The aggregate of square sum of positive jitter value from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.18 | ColumnhpicfIpSlaHistAggrMinDtoSPostv | read-only | current | The minimum positive jitter value from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.19 | ColumnhpicfIpSlaHistAggrMaxDtoSPostv | read-only | current | The maximum positive jitter value from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.20 | ColumnhpicfIpSlaHistAggrNumOfPosDS | read-only | current | The number of times destination to source jitter was positive. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.21 | ColumnhpicfIpSlaHistAggrSumOfPosDS | read-only | current | The sum of positive jitter value from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.22 | ColumnhpicfIpSlaHistAggrAvgDtoSPostv | read-only | current | The sum of average positive jitter values from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.23 | ColumnhpicfIpSlaHistAggrSum2PostvDS | read-only | current | The aggregate of square sum of positive jitter value from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.24 | ColumnhpicfIpSlaHistAggrMinStoDNegtv | read-only | current | The minimum negative jitter value from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.25 | ColumnhpicfIpSlaHistAggrMaxStoDNegtv | read-only | current | The maximum negative jitter value from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.26 | ColumnhpicfIpSlaHistAggrNumOfNegSD | read-only | current | The number of times jitter value from source to destination became negative. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.27 | ColumnhpicfIpSlaHistAggrSumOfNegSD | read-only | current | The sum of negative jitter value from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.28 | ColumnhpicfIpSlaHistAggrAvgStoDNegtv | read-only | current | The average of the negative jitter value from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.29 | ColumnhpicfIpSlaHistAggrSum2NegtvSD | read-only | current | The aggregate of square sum of negative jitter value from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.30 | ColumnhpicfIpSlaHistAggrMinDtoSNegtv | read-only | current | The minimum negative jitter value from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.31 | ColumnhpicfIpSlaHistAggrMaxDtoSNegtv | read-only | current | The maximum negative jitter value from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.32 | ColumnhpicfIpSlaHistAggrNumOfNegDS | read-only | current | The number of times jitter value from destination to source became negative. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.33 | ColumnhpicfIpSlaHistAggrSumOfNegDS | read-only | current | The sum of negative jitter value from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.34 | ColumnhpicfIpSlaHistAggrAvgDtoSNegtv | read-only | current | The average of the negative jitter value from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.35 | ColumnhpicfIpSlaHistAggrSum2NegtvDS | read-only | current | The aggregate of square sum of negative jitter value from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.36 | ColumnhpicfIpSlaHistAggrMinStoDDelay | read-only | current | The minimum one-way time from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.37 | ColumnhpicfIpSlaHistAggrMaxStoDDelay | read-only | current | The maximum one-way time from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.38 | ColumnhpicfIpSlaHistAggrSumStoDDelay | read-only | current | The sum of one-way time from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.39 | ColumnhpicfIpSlaHistAggrNumOfDelaySD | read-only | current | The number of times source to destination delay occurred for the last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.40 | ColumnhpicfIpSlaHistAggrSum2DelaySD | read-only | current | The sum of squares of one-way delay from source to destination for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.41 | ColumnhpicfIpSlaHistAggrMinDtoSDelay | read-only | current | The minimum one-way delay from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.42 | ColumnhpicfIpSlaHistAggrMaxDtoSDelay | read-only | current | The maximum one-way delay from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.43 | ColumnhpicfIpSlaHistAggrNumOfDelayDS | read-only | current | The number of times destination to source delay occurred for the last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.44 | ColumnhpicfIpSlaHistAggrSumDtoSDelay | read-only | current | The sum of one-way delay from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.45 | ColumnhpicfIpSlaHistAggrSum2DelayDS | read-only | current | The sum of squares of one-way delay from destination to source for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.46 | ColumnhpicfIpSlaHistAggrMinICPIF | read-only | current | The minimum ICPIF value for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.47 | ColumnhpicfIpSlaHistAggrMaxICPIF | read-only | current | The maximum ICPIF value for last 25 probes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.48 | ColumnhpicfIpSlaHistAggrMinMOS | read-only | current | The minimum MOS value for last 25 probes. The Value of this object is 100 times of the actual value. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.8.1.49 | ColumnhpicfIpSlaHistAggrMaxMOS | read-only | current | The maximum MOS value for last 25 probes. The Value of this object is 100 times of the actual value. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.9 | TablehpicfIpSlaRespResultTable | not-accessible | current | This table specifies the IP SLA responder result parameters as entries. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1 | RowhpicfIpSlaRespResultEntry | not-accessible | current | An entry on this table specifies responder status and number of packets received and responded. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1.1 | ColumnhpicfIpSlaRespStatus | read-only | current | The status of the responder. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1.2 | ColumnhpicfIpSlaRespnumPktRcvd | read-only | current | The number of packets received by the responder. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.9.1.3 | ColumnhpicfIpSlaRespNumPktRespnd | read-only | current | The number of packets sent by the responder. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.10 | TablehpicfIpSlaJitterRespTable | not-accessible | current | This table specifies IP SLA jitter responder parameters as entries. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1 | RowhpicfIpSlaJitterRespEntry | not-accessible | current | An entry on this table specifies the local IP address, port number and row status corresponding to each SLA responder config. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.1 | ColumnhpicfIpSlaJitterRespType | not-accessible | current | The SLA jitter responder type. The udpJitter and udpJitterVoIP values calculate one-way delay, therefore a timestamp has to be embedded while replying back. Th… |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.2 | ColumnhpicfIpSlaJitterRespAddressType | read-create | current | SLA jitter responder IP address type. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.3 | ColumnhpicfIpSlaJitterRespAddress | not-accessible | current | The local IP address to which the responder is bound. This is one of the indexes for hpicfIpSlaJitterRespTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.4 | ColumnhpicfIpSlaJitterRespL4Port | not-accessible | current | L4 port number on hpicfIpSlaJitterRespAddress where the responder listens for probe packets from SLA source. This is one of the indexes for hpicfIpSlaJitterRes… |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.5 | ColumnhpicfIpSlaJitterRespSrcAddrType | read-create | current | SLA jitter responder source IP address type. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.6 | ColumnhpicfIpSlaJitterRespSrcAddress | not-accessible | current | The source IP address to which the responder is responding. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.1.10.1.7 | ColumnhpicfIpSlaJitterRespRowStatus | read-create | current | SLA jitter responder row status. |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2 | NodehpicfIpSlaConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1 | NodehpicfIpSlaGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.1 | GrouphpicfIpSlaGroup | current | A mandatory group with a set of IP SLA objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.2 | GrouphpicfIpSlaAttrGroup | deprecated | A group with a set of IP SLA attribute objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.3 | GrouphpicfIpSlaThrGroup | current | A group with a set of IP SLA threshold objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.4 | GrouphpicfIpSlaRespGroup | current | A group with a set of IP SLA responder objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.5 | GrouphpicfIpSlaNotificationsGroup | current | A collection of IP SLA source and responder notifications objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.6 | GrouphpicfIpSlaMsgGroup | current | A mandatory group with a set of IP SLA result objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.7 | GrouphpicfIpSlaHistGroup | current | A mandatory group with a set of IP SLA history objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.8 | GrouphpicfIpSlaHistSummGroup | current | A mandatory group with a set of IP SLA history summary objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.9 | GrouphpicfIpSlaAttrGroup1 | current | A group with a set of IP SLA attribute objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.10 | GrouphpicfIpSlaHistAggrGroup | current | A mandatory group with a set of IP SLA aggregate result summary objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.11 | GrouphpicfIpSlaRespResultGroup | current | A mandatory group with a set of IP SLA responder objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.12 | GrouphpicfIpSlaJitterRespGroup | current | A group with a set of IP SLA jitter responder objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.2 | NodehpicfIpSlaCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.2.1 | CompliancehpicfIpSlaCompliance | deprecated | The compliance statement for HP switches that support IP SLA. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.127.2.2.2 | CompliancehpicfIpSlaCompliance1 | current | The compliance statement for HP switches that support IP SLA. |