HPN-ICF-EPON-MIB
424 objects
The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
Imported Objects
| HPN-ICF-LSW-DEV-ADM-MIB | hpnicfLswFrameIndex hpnicfLswSlotIndex |
| HPN-ICF-OID-MIB | hpnicfEpon |
| IF-MIB | ifDescr ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1 | IdentityhpnicfEponMibObjects | The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethe… | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1 | NodehpnicfEponSysMan | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.1 | ScalarhpnicfEponAutoAuthorize | read-write | current | This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.2 | ScalarhpnicfEponMonitorCycle | read-write | current | The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.3 | ScalarhpnicfEponMsgTimeOut | read-write | current | Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.4 | ScalarhpnicfEponMsgLoseNum | read-write | current | The times of messages sending timeouts, after which OLT will reset (applying to every OLT). |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.5 | ScalarhpnicfEponSysHasEPONBoard | read-only | current | true(1) - At least an EPON board exists. false(2) - No EPON board exists. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.6 | ScalarhpnicfEponMonitorCycleEnable | read-write | current | Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.7 | ScalarhpnicfEponOltSoftwareErrAlmEnable | read-write | current | Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.8 | ScalarhpnicfEponPortLoopBackAlmEnable | read-write | current | LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.9 | ScalarhpnicfEponMonitorCycleMinVal | read-only | current | The lower limit of cycle which be confined to the hpnicfEponMonitorCycle. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.10 | ScalarhpnicfEponMonitorCycleMaxVal | read-only | current | The upper limit of cycle which be confined to the hpnicfEponMonitorCycle. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.11 | ScalarhpnicfEponMsgTimeOutMinVal | read-only | current | The lower limit of timeout which be confined to the hpnicfEponMsgTimeOut. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.12 | ScalarhpnicfEponMsgTimeOutMaxVal | read-only | current | The upper limit of timeout which be confined to the hpnicfEponMsgTimeOut. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.13 | ScalarhpnicfEponMsgLoseNumMinVal | read-only | current | The lower limit of time which be confined to the hpnicfEponMsgLoseNum. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.14 | ScalarhpnicfEponMsgLoseNumMaxVal | read-only | current | The upper limit of time which be confined to the hpnicfEponMsgLoseNum. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.15 | NodehpnicfEponSysScalarGroup | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16 | TablehpnicfEponSysManTable | not-accessible | current | This table defines system related parameters. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1 | RowhpnicfEponSysManEntry | not-accessible | current | The entry of the table hpnicfEponSysManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.1 | ColumnhpnicfEponSlotIndex | not-accessible | current | Slot Index, the index of hpnicfEponSysManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.2 | ColumnhpnicfEponModeSwitch | read-write | current | cmode - epon standard mode. hmode - private mode. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.3 | ColumnhpnicfEponAutomaticMode | read-write | current | Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize O… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.4 | ColumnhpnicfEponOamDiscoveryTimeout | read-write | current | Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.5 | ColumnhpnicfEponEncryptionNoReplyTimeOut | read-write | current | Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.6 | ColumnhpnicfEponEncryptionUpdateTime | read-write | current | Encryption key update timer for all ONUs on slot, indicated by hpnicfEponSlotIndex, ranging from 1 to 255, measured in seconds. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.7 | ColumnhpnicfEponAutoBindStatus | read-write | current | enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17 | TablehpnicfEponAutoUpdateTable | not-accessible | current | EPON auto update ONU application configuration. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1 | RowhpnicfEponAutoUpdateEntry | not-accessible | current | The entry of the table hpnicfEponAutoUpdateTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.1 | ColumnhpnicfEponAutoUpdateFileName | read-write | current | The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.2 | ColumnhpnicfEponAutoUpdateSchedStatus | read-write | current | The status of schedule update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateSchedStatus. enable - enable ONU sc… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.3 | ColumnhpnicfEponAutoUpdateSchedTime | read-write | current | The schedule update timing configuration is related to the hpnicfEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.4 | ColumnhpnicfEponAutoUpdateSchedType | read-write | current | The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU a… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.5 | ColumnhpnicfEponAutoUpdateRealTimeStatus | read-write | current | The status of real time update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateRealTimeStatus. enable - enable ON… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18 | TablehpnicfEponOuiIndexNextTable | not-accessible | current | Next OUI index table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1 | RowhpnicfEponOuiIndexNextEntry | not-accessible | current | The entry of the table hpnicfEponOuiIndexNextTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1.1 | ColumnhpnicfEponOuiIndexNext | read-only | current | This object contains an appropriate value to be used for hpnicfEponOuiIndex when creating rows in the hpnicfEponOuiTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19 | TablehpnicfEponOuiTable | not-accessible | current | List of OUI and OAM supported by OLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1 | RowhpnicfEponOuiEntry | not-accessible | current | The entry of the table hpnicfEponOuiTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.1 | ColumnhpnicfEponOuiIndex | not-accessible | current | The index of this table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.2 | ColumnhpnicfEponOuiValue | read-create | current | OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.3 | ColumnhpnicfEponOamVersion | read-create | current | Version of OAM protocol defined by the organization denoted by OUI. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.4 | ColumnhpnicfEponOuiRowStatus | read-create | current | The status of this table entry. Only active, createAndGo and the destory are supported. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20 | TablehpnicfEponMulticastControlTable | not-accessible | current | Multicast control global configuration. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1 | RowhpnicfEponMulticastControlEntry | not-accessible | current | The entry of the table hpnicfEponMulticastControlTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.1 | ColumnhpnicfEponMulticastVlanId | not-accessible | current | The index of this table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.2 | ColumnhpnicfEponMulticastAddressList | read-create | current | The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and t… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.3 | ColumnhpnicfEponMulticastStatus | read-create | current | The status of this table entry. Only active, createAndGo and the destory are supported. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.2 | NodehpnicfEponFileName | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.1 | ScalarhpnicfEponDbaUpdateFileName | read-write | current | The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.2 | ScalarhpnicfEponOnuUpdateFileName | read-write | current | The filename of the ONU firmware to be updated. Note that the filename must contain the file path. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3 | NodehpnicfEponOltMan | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1 | TablehpnicfOltSysManTable | not-accessible | current | This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1 | RowhpnicfOltSysManEntry | not-accessible | current | The entry of the table hpnicfOltSysManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.1 | ColumnhpnicfOltLaserOnTime | read-write | current | The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ). |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.2 | ColumnhpnicfOltLaserOffTime | read-write | current | The laser off time of the ONUs during the discovery process, measured in TQ. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.3 | ColumnhpnicfOltMultiCopyBrdCast | read-write | current | true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, exce… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.4 | ColumnhpnicfOltEnableDiscardPacket | read-write | current | Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.5 | ColumnhpnicfOltSelfTest | read-write | current | selftest(1): Test OLT to check whether it's OK. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.6 | ColumnhpnicfOltSelfTestResult | read-only | current | The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.7 | ColumnhpnicfOltMaxRtt | read-write | current | Set the max Round Trip Time of this OLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2 | TablehpnicfOltInfoTable | not-accessible | current | Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1 | RowhpnicfOltInfoEntry | not-accessible | current | The entry of the table hpnicfOltInfoTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.1 | ColumnhpnicfOltFirmMajorVersion | read-only | current | OLT firmware major version. If the object length is zero, it means the version is unknown. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.2 | ColumnhpnicfOltFirmMinorVersion | read-only | current | OLT firmware minor version. If the object length is zero, it means the version is unknown. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.3 | ColumnhpnicfOltHardMajorVersion | read-only | current | OLT hardware major version. If the object length is zero, it means the version is unknown. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.4 | ColumnhpnicfOltHardMinorVersion | read-only | current | OLT hardware minor version. If the object length is zero, it means the version is unknown. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.5 | ColumnhpnicfOltAgcLockTime | read-only | current | PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.6 | ColumnhpnicfOltAgcCdrTime | read-only | current | PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.7 | ColumnhpnicfOltMacAddress | read-only | current | OLT MAC address. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.8 | ColumnhpnicfOltWorkMode | read-only | current | The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT i… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.9 | ColumnhpnicfOltOpticalPowerTx | read-only | current | The optical power transmitted by this OLT. It measured in 0.01 dBm unit. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.10 | ColumnhpnicfOltOpticalPowerRx | read-only | current | The burst optical power received by this OLT. It measured in 0.01 dBm unit. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3 | TablehpnicfOltDbaManTable | not-accessible | current | This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1 | RowhpnicfOltDbaManEntry | not-accessible | current | The entry of the table hpnicfOltDbaManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.1 | ColumnhpnicfOltDbaEnabledType | read-write | current | Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.2 | ColumnhpnicfOltDbaDiscoveryLength | read-write | current | Discovery length in TQ units. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.3 | ColumnhpnicfOltDbaDiscovryFrequency | read-write | current | How often should the OLT send discovery frames to the ONUs, measured in grant cycles. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.4 | ColumnhpnicfOltDbaCycleLength | read-write | current | The grant cycle length in TQ units. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.5 | ColumnhpnicfOltDbaVersion | read-only | current | DBA version of the OLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.6 | ColumnhpnicfOltDbaUpdate | read-write | current | Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hpnicfEponDbaUpd… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.7 | ColumnhpnicfOltDbaUpdateResult | read-only | current | The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExis… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4 | TablehpnicfOltPortAlarmThresholdTable | not-accessible | current | The table defines the alarm threshold of OLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1 | RowhpnicfOltPortAlarmThresholdEntry | not-accessible | current | The entry of the table hpnicfOltPortAlarmThresholdTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.1 | ColumnhpnicfOltPortAlarmBerEnabled | read-write | current | Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.2 | ColumnhpnicfOltPortAlarmBerDirect | read-write | current | Traffic direction to monitor for BER alarm. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.3 | ColumnhpnicfOltPortAlarmBerThreshold | read-write | current | BER threshold exceed which the alarm is raised. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.4 | ColumnhpnicfOltPortAlarmFerEnabled | read-write | current | Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.5 | ColumnhpnicfOltPortAlarmFerDirect | read-write | current | Traffic direction to monitor for FER alarm. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.6 | ColumnhpnicfOltPortAlarmFerThreshold | read-write | current | Frame error rate exceed threshold then the alarm is raised. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.7 | ColumnhpnicfOltPortAlarmLlidMismatchEnabled | read-write | current | Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.8 | ColumnhpnicfOltPortAlarmLlidMismatchThreshold | read-write | current | The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.9 | ColumnhpnicfOltPortAlarmRemoteStableEnabled | read-write | current | Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.10 | ColumnhpnicfOltPortAlarmLocalStableEnabled | read-write | current | Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.11 | ColumnhpnicfOltPortAlarmRegistrationEnabled | read-write | current | Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.12 | ColumnhpnicfOltPortAlarmOamDisconnectionEnabled | read-write | current | Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.13 | ColumnhpnicfOltPortAlarmEncryptionKeyEnabled | read-write | current | Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.14 | ColumnhpnicfOltPortAlarmVendorSpecificEnabled | read-write | current | Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.15 | ColumnhpnicfOltPortAlarmRegExcessEnabled | read-write | current | Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.16 | ColumnhpnicfOltPortAlarmDFEEnabled | read-write | current | Behavior of device fatal error alarm. true - alarm enable. false - alarm disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.5 | ScalarhpnicfOltLaserOnTimeMinVal | read-only | current | The lower limit of time which is confined to hpnicfOltLaserOnTime. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.6 | ScalarhpnicfOltLaserOnTimeMaxVal | read-only | current | The upper limit of time which is confined to hpnicfOltLaserOnTime. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.7 | ScalarhpnicfOltLaserOffTimeMinVal | read-only | current | The lower limit of time which is confined to hpnicfOltLaserOffTime. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.8 | ScalarhpnicfOltLaserOffTimeMaxVal | read-only | current | The upper limit of time which is confined to hpnicfOltLaserOffTime. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.9 | ScalarhpnicfOltDbaDiscoveryLengthMinVal | read-only | current | The lower limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.10 | ScalarhpnicfOltDbaDiscoveryLengthMaxVal | read-only | current | The upper limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.11 | ScalarhpnicfOltDbaDiscovryFrequencyMinVal | read-only | current | The lower limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.12 | ScalarhpnicfOltDbaDiscovryFrequencyMaxVal | read-only | current | The upper limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.13 | ScalarhpnicfOltDbaCycleLengthMinVal | read-only | current | The lower limit of the frames which is confined to hpnicfOltDbaCycleLength. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.14 | ScalarhpnicfOltDbaCycleLengthMaxVal | read-only | current | The upper limit of the frames which is confined to hpnicfOltDbaCycleLength. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.15 | ScalarhpnicfOltPortAlarmLlidMisMinVal | read-only | current | The lower limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.16 | ScalarhpnicfOltPortAlarmLlidMisMaxVal | read-only | current | The upper limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.17 | ScalarhpnicfOltPortAlarmBerMinVal | read-only | current | The lower limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.18 | ScalarhpnicfOltPortAlarmBerMaxVal | read-only | current | The upper limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.19 | ScalarhpnicfOltPortAlarmFerMinVal | read-only | current | The lower limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.20 | ScalarhpnicfOltPortAlarmFerMaxVal | read-only | current | The upper limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21 | TablehpnicfOnuSilentTable | not-accessible | current | This table is used for getting silent ONU information of OLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1 | RowhpnicfOnuSilentEntry | not-accessible | current | The entry of the table hpnicfOnuSilentTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.1 | ColumnhpnicfOnuSilentMacAddr | not-accessible | current | The MAC address of silent ONUs in OLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.2 | ColumnhpnicfOnuSilentTime | read-only | current | The aging time of a silent ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22 | TablehpnicfOltUsingOnuTable | not-accessible | current | The table containing configurations to manage ONU interface(s) based on OLT interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1 | RowhpnicfOltUsingOnuEntry | not-accessible | current | The entry of the table hpnicfOltUsingOnuTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.1 | ColumnhpnicfOltUsingOnuNum | not-accessible | current | The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.2 | ColumnhpnicfOltUsingOnuIfIndex | read-only | current | The ifIndex of the ONU interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.3 | ColumnhpnicfOltUsingOnuRowStatus | read-create | current | This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5 | NodehpnicfEponOnuMan | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1 | TablehpnicfOnuSysManTable | not-accessible | current | This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1 | RowhpnicfOnuSysManEntry | not-accessible | current | The entry of the table hpnicfOnuSysManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.1 | ColumnhpnicfOnuEncryptMan | read-write | current | Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.2 | ColumnhpnicfOnuReAuthorize | read-write | current | Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authen… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.3 | ColumnhpnicfOnuMulticastFilterStatus | read-write | current | true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.4 | ColumnhpnicfOnuDbaReportQueueSetNumber | read-write | current | The number of queue sets reported in MPCP report frames. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.5 | ColumnhpnicfOnuRemoteFecStatus | read-write | current | Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.6 | ColumnhpnicfOnuPortBerStatus | read-write | current | enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.7 | ColumnhpnicfOnuReset | read-write | current | Reboot ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.8 | ColumnhpnicfOnuMulticastControlMode | read-write | current | igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.9 | ColumnhpnicfOnuAccessVlan | read-write | current | The VLAN ID assigned to untagged frames received on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.10 | ColumnhpnicfOnuEncryptKey | read-write | current | The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 has… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.11 | ColumnhpnicfOnuUniUpDownTrapStatus | read-write | current | true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.12 | ColumnhpnicfOnuFecStatus | read-write | current | Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 6… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.13 | ColumnhpnicfOnuMcastCtrlHostAgingTime | read-write | current | The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.14 | ColumnhpnicfOnuMulticastFastLeaveEnable | read-write | current | true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.15 | ColumnhpnicfOnuPortIsolateEnable | read-write | current | true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2 | TablehpnicfOnuLinkTestTable | not-accessible | current | LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a va… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1 | RowhpnicfOnuLinkTestEntry | not-accessible | current | The entry of hpnicfOnuLinkTestEntry. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.1 | ColumnhpnicfOnuLinkTestFrameNum | read-write | current | Exact number of measurement frames. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.2 | ColumnhpnicfOnuLinkTestFrameSize | read-write | current | Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.3 | ColumnhpnicfOnuLinkTestDelay | read-write | current | true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.4 | ColumnhpnicfOnuLinkTestVlanTag | read-write | current | true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.5 | ColumnhpnicfOnuLinkTestVlanPriority | read-write | current | VLAN priority: 0-7. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.6 | ColumnhpnicfOnuLinkTestVlanTagID | read-write | current | VLAN ID: 1-4094. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.7 | ColumnhpnicfOnuLinkTestResultSentFrameNum | read-only | current | The total number of frames sent during the link test process. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.8 | ColumnhpnicfOnuLinkTestResultRetFrameNum | read-only | current | The total number of frames return back during the link test process. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.9 | ColumnhpnicfOnuLinkTestResultRetErrFrameNum | read-only | current | The total number of error frames return back during the link test process. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.10 | ColumnhpnicfOnuLinkTestResultMinDelay | read-only | current | The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.11 | ColumnhpnicfOnuLinkTestResultMeanDelay | read-only | current | The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.12 | ColumnhpnicfOnuLinkTestResultMaxDelay | read-only | current | The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3 | TablehpnicfOnuBandWidthTable | not-accessible | current | Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID net… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1 | RowhpnicfOnuBandWidthEntry | not-accessible | current | The entry of table hpnicfOnuBandWidthTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.1 | ColumnhpnicfOnuDownStreamBandWidthPolicy | read-write | current | true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.2 | ColumnhpnicfOnuDownStreamMaxBandWidth | read-write | current | Maximum bandwidth allowed for the ONU, measured in Kbits/Sec. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.3 | ColumnhpnicfOnuDownStreamMaxBurstSize | read-write | current | Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.4 | ColumnhpnicfOnuDownStreamHighPriorityFirst | read-write | current | true:Enable high priority frames preference. false:Disable high priority frames preference. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.5 | ColumnhpnicfOnuDownStreamShortFrameFirst | read-write | current | true:Enable short frames preference. false:Disable short frames preference. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.6 | ColumnhpnicfOnuP2PBandWidthPolicy | read-write | current | true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.7 | ColumnhpnicfOnuP2PMaxBandWidth | read-write | current | Maximum bandwidth allowed for the ONU, measured in Kbits/Sec. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.8 | ColumnhpnicfOnuP2PMaxBurstSize | read-write | current | Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.9 | ColumnhpnicfOnuP2PHighPriorityFirst | read-write | current | true:Enable high priority frames preference. false:Disable high priority frames preference. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.10 | ColumnhpnicfOnuP2PShortFrameFirst | read-write | current | true:Enable short frames preference. false:Disable short frames preference. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4 | TablehpnicfOnuSlaManTable | not-accessible | current | Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the i… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1 | RowhpnicfOnuSlaManEntry | not-accessible | current | The entry of table hpnicfOnuSlaManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.1 | ColumnhpnicfOnuSlaMaxBandWidth | read-write | current | Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The minimum bandwidth sho… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.2 | ColumnhpnicfOnuSlaMinBandWidth | read-write | current | Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The maximum bandwidth sho… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.3 | ColumnhpnicfOnuSlaBandWidthStepVal | read-only | current | Granularity of bandwidth - measured in Kbit/s. The value of hpnicfOnuSlaMaxBandWidth and hpnicfOnuSlaMinBandWidth should be the multiple of the value of this o… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.4 | ColumnhpnicfOnuSlaDelay | read-write | current | low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.5 | ColumnhpnicfOnuSlaFixedBandWidth | read-write | current | Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.6 | ColumnhpnicfOnuSlaPriorityClass | read-write | current | Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.7 | ColumnhpnicfOnuSlaFixedPacketSize | read-write | current | Fixed packet size - measured in byte. The value of this object should be valid when hpnicfOnuSlaFixedBandWidth is configured. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5 | TablehpnicfOnuInfoTable | not-accessible | current | Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1 | RowhpnicfOnuInfoEntry | not-accessible | current | The entry of the hpnicfOnuInfoTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.1 | ColumnhpnicfOnuHardMajorVersion | read-only | current | ONU hardware major version. If the object length is zero, it means the version is unknown. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.2 | ColumnhpnicfOnuHardMinorVersion | read-only | current | ONU hardware minor version. If the object length is zero, it means the version is unknown. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.3 | ColumnhpnicfOnuSoftwareVersion | read-only | current | ONU software version. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.4 | ColumnhpnicfOnuUniMacType | read-only | current | ONU User Network Interface(UNI) port MAC type. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.5 | ColumnhpnicfOnuLaserOnTime | read-only | current | The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOnTime is unknown. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.6 | ColumnhpnicfOnuLaserOffTime | read-only | current | The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOffTime is unknown. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.7 | ColumnhpnicfOnuGrantFifoDep | read-only | current | Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.8 | ColumnhpnicfOnuWorkMode | read-only | current | The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.9 | ColumnhpnicfOnuPCBVersion | read-only | current | ONU PCB version. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.10 | ColumnhpnicfOnuRtt | read-only | current | The signal round-trip-time(RTT) received. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.11 | ColumnhpnicfOnuEEPROMVersion | read-only | current | ONU EEPROM version. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.12 | ColumnhpnicfOnuRegType | read-only | current | ONU registered type. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.13 | ColumnhpnicfOnuHostType | read-only | current | ONU host type. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.14 | ColumnhpnicfOnuDistance | read-only | current | The distance between OLT and ONU, measured in meter. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.15 | ColumnhpnicfOnuLlid | read-only | current | The link layer identifier, which uniquely identifies the ONU of a specific OLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.16 | ColumnhpnicfOnuVendorId | read-only | current | ONU vendor ID. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.17 | ColumnhpnicfOnuFirmwareVersion | read-only | current | ONU firmware version. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.18 | ColumnhpnicfOnuOpticalPowerReceivedByOlt | read-only | current | The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6 | TablehpnicfOnuMacAddrInfoTable | not-accessible | current | This table used for getting MAC address information of ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1 | RowhpnicfOnuMacAddrInfoEntry | not-accessible | current | The entry of the hpnicfEponOnuMacAddrInfoTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.1 | ColumnhpnicfOnuMacIndex | not-accessible | current | The index of ONUs in one OLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.2 | ColumnhpnicfOnuMacAddrFlag | read-only | current | The flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bo… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.3 | ColumnhpnicfOnuMacAddress | read-only | current | The MAC address of ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7 | TablehpnicfOnuBindMacAddrTable | not-accessible | current | This table implements the following functions for ONUs: Bind MAC of ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1 | RowhpnicfOnuBindMacAddrEntry | not-accessible | current | The entry of the table hpnicfOnuBindMacAddrTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.1 | ColumnhpnicfOnuBindMacAddress | read-write | current | Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device p… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.2 | ColumnhpnicfOnuBindType | read-write | current | Set the binding type with the ONU which is confined to the index of hpnicfEponOnuTypeDescr. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8 | TablehpnicfOnuFirmwareUpdateTable | not-accessible | current | This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1 | RowhpnicfOnuFirmwareUpdateEntry | not-accessible | current | The entry of the table hpnicfOnuFirmwareUpdateTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.1 | ColumnhpnicfOnuUpdate | read-write | current | update(1): Update the ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.2 | ColumnhpnicfOnuUpdateResult | read-only | current | The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. file… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.3 | ColumnhpnicfOnuUpdateFileName | read-write | current | The filename of the ONU firmware to be updated. Note that the filename must contain the file path. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.9 | ScalarhpnicfOnuLinkTestFrameNumMinVal | read-only | current | The lower limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.10 | ScalarhpnicfOnuLinkTestFrameNumMaxVal | read-only | current | The upper limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.11 | ScalarhpnicfOnuSlaMaxBandWidthMinVal | read-only | current | The lower limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.12 | ScalarhpnicfOnuSlaMaxBandWidthMaxVal | read-only | current | The upper limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.13 | ScalarhpnicfOnuSlaMinBandWidthMinVal | read-only | current | The lower limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.14 | ScalarhpnicfOnuSlaMinBandWidthMaxVal | read-only | current | The upper limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15 | TablehpnicfEponOnuTypeManTable | not-accessible | current | This table is used for getting ONU bind type in current version. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1 | RowhpnicfEponOnuTypeManEntry | not-accessible | current | The entry of the hpnicfEponOnuTypeManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.1 | ColumnhpnicfEponOnuTypeIndex | not-accessible | current | The ONU type index. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.2 | ColumnhpnicfEponOnuTypeDescr | read-only | current | The ONU type description which can be used to bind ONU in current version. the value of hpnicfOnuBindType can be configured by the index of hpnicfEponOnuTypeDe… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16 | TablehpnicfOnuPacketManTable | not-accessible | current | This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1 | RowhpnicfOnuPacketManEntry | not-accessible | current | The entry of the hpnicfOnuPacketManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.1 | ColumnhpnicfOnuPriorityTrust | read-write | current | The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The ser… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.2 | ColumnhpnicfOnuQueueScheduler | read-write | current | The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17 | TablehpnicfOnuProtocolTable | not-accessible | current | This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1 | RowhpnicfOnuProtocolEntry | not-accessible | current | The entry of hpnicfOnuProtocolTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.1 | ColumnhpnicfOnuStpStatus | read-write | current | true(1) - STP status enable on ONU. false(2) - STP status disable on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.2 | ColumnhpnicfOnuIgmpSnoopingStatus | read-write | current | true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.3 | ColumnhpnicfOnuDhcpsnoopingOption82 | read-write | current | true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.4 | ColumnhpnicfOnuDhcpsnooping | read-write | current | true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.5 | ColumnhpnicfOnuPppoe | read-write | current | true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.6 | ColumnhpnicfOnuIgmpSnoopingHostAgingT | read-write | current | Set the host aging time of IGMP on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.7 | ColumnhpnicfOnuIgmpSnoopingMaxRespT | read-write | current | Set the max response time of IGMP on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.8 | ColumnhpnicfOnuIgmpSnoopingRouterAgingT | read-write | current | Set the router aging time of IGMP on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.9 | ColumnhpnicfOnuIgmpSnoopingAggReportS | read-write | current | true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.10 | ColumnhpnicfOnuIgmpSnoopingAggLeaveS | read-write | current | true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18 | TablehpnicfOnuDot1xTable | not-accessible | current | This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1 | RowhpnicfOnuDot1xEntry | not-accessible | current | The entry of the hpnicfOnuDot1xTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.1 | ColumnhpnicfOnuDot1xAccount | read-write | current | ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hpnicfOnuDot1xPassword. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.2 | ColumnhpnicfOnuDot1xPassword | read-write | current | ONU 802.1X password. The object should be set together with hpnicfOnuDot1xAccount. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19 | TablehpnicfOnuPriorityQueueTable | not-accessible | current | This table contains specific information of priority queue. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1 | RowhpnicfOnuPriorityQueueEntry | not-accessible | current | The entry of hpnicfOnuPriorityQueueTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.1 | ColumnhpnicfOnuQueueDirection | not-accessible | current | The direction of priority queue. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.2 | ColumnhpnicfOnuQueueId | not-accessible | current | The queue ID of priority queue. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.3 | ColumnhpnicfOnuQueueSize | read-write | current | The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queue… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20 | TablehpnicfOnuCountTable | not-accessible | current | This table contains statistics of ONU port. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1 | RowhpnicfOnuCountEntry | not-accessible | current | The entry of hpnicfOnuCountTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.1 | ColumnhpnicfOnuInCRCErrPkts | read-only | current | The total number of frames received with bad CRC checksum. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.2 | ColumnhpnicfOnuOutDroppedFrames | read-only | current | The total number of frames dropped because of buffer failure. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21 | NodehpnicfEponOnuScalarGroup | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.1 | ScalarhpnicfOnuPriorityQueueSizeMinVal | read-only | current | The lower limit of queue size which is confined to hpnicfOnuQueueSize. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.2 | ScalarhpnicfOnuPriorityQueueSizeMaxVal | read-only | current | The upper limit of queue size which is confined to hpnicfOnuQueueSize. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.3 | ScalarhpnicfOnuPriorityQueueBandwidthMinVal | read-only | current | The lower limit of hpnicfOnuQueueMaxBandwidth. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.4 | ScalarhpnicfOnuPriorityQueueBandwidthMaxVal | read-only | current | The upper limit of hpnicfOnuQueueMaxBandwidth. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.5 | ScalarhpnicfOnuPriorityQueueBurstsizeMinVal | read-only | current | The lower limit of hpnicfOnuQueueMaxBurstsize. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.6 | ScalarhpnicfOnuPriorityQueueBurstsizeMaxVal | read-only | current | The upper limit of hpnicfOnuQueueMaxBurstsize. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.7 | ScalarhpnicfOnuUpdateByTypeNextIndex | read-only | current | Offer a free index of hpnicfOnuFirmwareUpdateByTypeTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22 | TablehpnicfOnuQueueBandwidthTable | not-accessible | current | This table contains specific bandwidth information of ONU priority queue. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1 | RowhpnicfOnuQueueBandwidthEntry | not-accessible | current | The entry of hpnicfOnuQueueBandwidthTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.1 | ColumnhpnicfOnuQueueMaxBandwidth | read-write | current | The maximum bandwidth of specific ONU priority queue, measured in 100Kbps. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.2 | ColumnhpnicfOnuQueueMaxBurstsize | read-write | current | The maximum burst size of specific ONU priority queue, measured in 64Bytes. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.3 | ColumnhpnicfOnuQueuePolicyStatus | read-write | current | true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23 | TablehpnicfOnuIpAddressTable | not-accessible | current | ONU IP address table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1 | RowhpnicfOnuIpAddressEntry | not-accessible | current | The entry of hpnicfOnuIpAddressTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.1 | ColumnhpnicfOnuIpAddress | read-write | current | The IP address assigned to the ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.2 | ColumnhpnicfOnuIpAddressMask | read-write | current | The mask of IP address denoted by hpnicfOnuIpAddress. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.3 | ColumnhpnicfOnuIpAddressGateway | read-write | current | The gateway of IP address denoted by hpnicfOnuIpAddress. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.4 | ColumnhpnicfOnuDhcpallocate | read-write | current | true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.5 | ColumnhpnicfOnuManageVID | read-write | current | The management VLAN of ONU denoted by hpnicfOnuManageVID. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.6 | ColumnhpnicfOnuManageVlanIntfS | read-write | current | The management interface status of ONU denoted by hpnicfOnuManageVlanIntfS. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24 | TablehpnicfOnuChipSetInfoTable | not-accessible | current | ONU vendor specific information of ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1 | RowhpnicfOnuChipSetInfoEntry | not-accessible | current | The entry of hpnicfOnuChipSetInfoTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.1 | ColumnhpnicfOnuChipSetVendorId | read-only | current | Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.2 | ColumnhpnicfOnuChipSetModel | read-only | current | Chip model, numbering(range from 0 to 0xFF) by the chip vendor. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.3 | ColumnhpnicfOnuChipSetRevision | read-only | current | Chip revision. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.4 | ColumnhpnicfOnuChipSetDesignDate | read-only | current | Chip design date. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25 | TablehpnicfOnuCapabilityTable | not-accessible | current | Capability of ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1 | RowhpnicfOnuCapabilityEntry | not-accessible | current | The entry of the table hpnicfOnuCapabilityTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.1 | ColumnhpnicfOnuServiceSupported | read-only | current | Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Etherne… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.2 | ColumnhpnicfOnuGEPortNumber | read-only | current | The current gigabit ethernet ports number supported by the ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.3 | ColumnhpnicfOnuFEPortNumber | read-only | current | the current fast ethernet ports number supported by the ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.4 | ColumnhpnicfOnuPOTSPortNumber | read-only | current | The current POTS ports number supported by the ONU |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.5 | ColumnhpnicfOnuE1PortsNumber | read-only | current | The current E1 ports number supported by the ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.6 | ColumnhpnicfOnuUpstreamQueueNumber | read-only | current | The number of upstream queues supported by the ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.7 | ColumnhpnicfOnuMaxUpstreamQueuePerPort | read-only | current | The number of maximum upstream queues per port of the ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.8 | ColumnhpnicfOnuDownstreamQueueNumber | read-only | current | The number of downstream queues supported by the ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.9 | ColumnhpnicfOnuMaxDownstreamQueuePerPort | read-only | current | The number of maximum downstream queues per port of the ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.10 | ColumnhpnicfOnuBatteryBackup | read-only | current | true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.11 | ColumnhpnicfOnuIgspFastLeaveSupported | read-only | current | true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.12 | ColumnhpnicfOnuMCtrlFastLeaveSupported | read-only | current | true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26 | TablehpnicfOnuDbaReportTable | not-accessible | current | This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1 | RowhpnicfOnuDbaReportEntry | not-accessible | current | The entry of the table hpnicfOnuDbaReportTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.1 | ColumnhpnicfOnuDbaReportQueueId | not-accessible | current | The DBA report queue ID. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.2 | ColumnhpnicfOnuDbaReportThreshold | read-write | current | The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 -… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.3 | ColumnhpnicfOnuDbaReportStatus | read-write | current | enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27 | TablehpnicfOnuCosToLocalPrecedenceTable | not-accessible | current | Table of map of the COS to local-precedence. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1 | RowhpnicfOnuCosToLocalPrecedenceEntry | not-accessible | current | Configuration information of map of the COS to local precedence. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.1 | ColumnhpnicfOnuCosToLocalPrecedenceCosIndex | read-only | current | Index of the map, obtains from packet cos value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.2 | ColumnhpnicfOnuCosToLocalPrecedenceValue | read-write | current | Value of local precedence. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28 | TablehpnicfEponOnuStpPortTable | not-accessible | current | Table of ONU STP ports. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1 | RowhpnicfEponOnuStpPortEntry | not-accessible | current | Configuration information of ONU STP ports. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.1 | ColumnhpnicfEponStpPortIndex | accessible-for-notify | current | The index of the STP ports. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.2 | ColumnhpnicfEponStpPortDescr | accessible-for-notify | current | The description of the STP ports. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.3 | ColumnhpnicfEponStpPortState | accessible-for-notify | current | The current state of the port (i.e. disabled, discarding, learning and forwarding). |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29 | TablehpnicfOnuPhysicalTable | not-accessible | current | This table is used for getting ONU physical information. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1 | RowhpnicfOnuPhysicalEntry | not-accessible | current | The entry of the hpnicfOnuPhysicalTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.1 | ColumnhpnicfOnuBridgeMac | read-only | current | The bridge MAC address of ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.2 | ColumnhpnicfOnuFirstPonMac | read-only | current | The MAC address of ONU first PON port. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.3 | ColumnhpnicfOnuFirstPonRegState | read-only | current | The register state of ONU first PON port. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.4 | ColumnhpnicfOnuSecondPonMac | read-only | current | The MAC address of ONU second PON port. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.5 | ColumnhpnicfOnuSecondPonRegState | read-only | current | The register state of ONU second PON port. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30 | TablehpnicfOnuSmlkTable | not-accessible | current | This table is used for getting ONU SMLK information. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1 | RowhpnicfOnuSmlkEntry | not-accessible | current | The entry of the hpnicfOnuSmlkTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.1 | ColumnhpnicfOnuSmlkGroupID | read-only | current | The SMLK group ID of ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.2 | ColumnhpnicfOnuSmlkFirstPonRole | read-only | current | The role of ONU first PON port in a SMLK group. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.3 | ColumnhpnicfOnuSmlkFirstPonStatus | read-only | current | The transmitting status of ONU first PON port in a SMLK group. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.4 | ColumnhpnicfOnuSmlkSecondPonRole | read-only | current | The role of ONU second PON port in a SMLK group. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.5 | ColumnhpnicfOnuSmlkSecondPonStatus | read-only | current | The transmitting status of ONU second PON port in a SMLK group. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31 | TablehpnicfOnuRS485PropertiesTable | not-accessible | current | Property table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1 | RowhpnicfOnuRS485PropertiesEntry | not-accessible | current | The entry of property table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.1 | ColumnhpnicfOnuRS485SerialIndex | not-accessible | current | The index of serial port. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.2 | ColumnhpnicfOnuRS485BaudRate | read-write | current | The port baud rate. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.3 | ColumnhpnicfOnuRS485DataBits | read-write | current | The port number of data bits in a character. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.4 | ColumnhpnicfOnuRS485Parity | read-write | current | The port sense of a character parity bit. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.5 | ColumnhpnicfOnuRS485StopBits | read-write | current | The port number of stop bits. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.6 | ColumnhpnicfOnuRS485FlowControl | read-write | current | The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using s… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.7 | ColumnhpnicfOnuRS485TXOctets | read-only | current | The number of output octets about the port. The unit is byte. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.8 | ColumnhpnicfOnuRS485RXOctets | read-only | current | The number of input octets about the port. The unit is byte. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.9 | ColumnhpnicfOnuRS485TXErrOctets | read-only | current | The number of output error octets about the port. The unit is byte. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.10 | ColumnhpnicfOnuRS485RXErrOctets | read-only | current | The number of input error octets about the port. The unit is byte. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.11 | ColumnhpnicfOnuRS485ResetStatistics | read-write | current | Reset the counters to zero, including hpnicfOnuRS485TXOctets, hpnicfOnuRS485RXOctets, hpnicfOnuRS485TXErrOctets and hpnicfOnuRS485RXErrOctets. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32 | TablehpnicfOnuRS485SessionSummaryTable | not-accessible | current | Session summary table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1 | RowhpnicfOnuRS485SessionSummaryEntry | not-accessible | current | The entry of session summary table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.1 | ColumnhpnicfOnuRS485SessionMaxNum | read-only | current | The max session number of every serial port which can be supported. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.2 | ColumnhpnicfOnuRS485SessionNextIndex | read-only | current | The next valid index used for creating a new session raw. When there is no valid index left, it will return 0. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33 | TablehpnicfOnuRS485SessionTable | not-accessible | current | RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1 | RowhpnicfOnuRS485SessionEntry | not-accessible | current | The entry of session table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.1 | ColumnhpnicfOnuRS485SessionIndex | not-accessible | current | Raw session index. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.2 | ColumnhpnicfOnuRS485SessionType | read-create | current | The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.3 | ColumnhpnicfOnuRS485SessionAddType | read-create | current | This object indicates the transport type of the address contained in hpnicfOnuRS485SessionRemoteIP object. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.4 | ColumnhpnicfOnuRS485SessionRemoteIP | read-create | current | The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpSe… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.5 | ColumnhpnicfOnuRS485SessionRemotePort | read-create | current | The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is … |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.6 | ColumnhpnicfOnuRS485SessionLocalPort | read-create | current | Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServe… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.7 | ColumnhpnicfOnuRS485SessionRowStatus | read-create | current | The status used for creating, modifying, and deleting instances of the columnar objects in raw session table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34 | TablehpnicfOnuRS485SessionErrInfoTable | not-accessible | current | Error information table. When failed to create a session, error information can be got from this table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1 | RowhpnicfOnuRS485SessionErrInfoEntry | not-accessible | current | The entry of error information table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1.1 | ColumnhpnicfOnuRS485SessionErrInfo | read-only | current | Error information string. When a response with 'noCreeation' for row creation in table hpnicfOnuRS485SessionTable, the error reason can be got from this object. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6 | NodehpnicfEponBatchOperationMan | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1 | TablehpnicfEponBatchOperationBySlotTable | not-accessible | current | This table is used for batch operation by slot. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1 | RowhpnicfEponBatchOperationBySlotEntry | not-accessible | current | The entry of the hpnicfEponBatchOperationBySlotTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.1 | ColumnhpnicfEponBatchOperationBySlotIndex | not-accessible | current | The EPON board index. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.2 | ColumnhpnicfEponBatchOperationBySlotType | read-write | current | The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hpni… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.3 | ColumnhpnicfEponBatchOperationBySlot | read-write | current | Execute batch operation. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.4 | ColumnhpnicfEponBatchOperationBySlotResult | read-only | current | The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed becau… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2 | TablehpnicfEponBatchOperationByOLTTable | not-accessible | current | This table is used for batch operation by OLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1 | RowhpnicfEponBatchOperationByOLTEntry | not-accessible | current | The entry of the hpnicfEponBatchOperationByOLTTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.1 | ColumnhpnicfEponBatchOperationByOLTType | read-write | current | The types of batch operation by OLT(operation for all ONUs in the OLT): 1 5 configure the MIB object module hpnicfEponOnuUpdateFileName with the filename of ON… |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.2 | ColumnhpnicfEponBatchOperationByOLT | read-write | current | Execute batch operation. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.3 | ColumnhpnicfEponBatchOperationByOLTResult | read-only | current | The result of batch operation: 0xFFFF 1 2 4 6 7 |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3 | TablehpnicfOnuFirmwareUpdateByTypeTable | not-accessible | current | This table is used to update ONU by ONU type. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1 | RowhpnicfOnuFirmwareUpdateByTypeEntry | not-accessible | current | The entry of the hpnicfOnuFirmwareUpdateByTypeTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.1 | ColumnhpnicfOnuUpdateByOnuTypeIndex | not-accessible | current | The type and file relationship table entry index. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.2 | ColumnhpnicfOnuUpdateByTypeOnuType | read-create | current | The type of ONUs. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.3 | ColumnhpnicfOnuUpdateByTypeFileName | read-create | current | The file to be updated for the type of ONUs. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.4 | ColumnhpnicfOnuUpdateByTypeRowStatus | read-create | current | The status of this table entry. Only createAndGo and destroy actions are supported. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7 | NodehpnicfEponErrorInfo | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.1 | ScalarhpnicfEponSoftwareErrorCode | accessible-for-notify | current | OLT software error code. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.2 | ScalarhpnicfOamVendorSpecificAlarmCode | accessible-for-notify | current | Alarm code of the vendor. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.3 | ScalarhpnicfEponOnuRegErrorMacAddr | accessible-for-notify | current | The MAC of ONU registered error. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.4 | ScalarhpnicfOamEventLogType | accessible-for-notify | current | The type of event that generated this entry in the event log. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.5 | ScalarhpnicfOamEventLogLocation | accessible-for-notify | current | Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.6 | ScalarhpnicfEponLoopbackPortIndex | accessible-for-notify | current | The index of port which generate loop back event. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.7 | ScalarhpnicfEponLoopbackPortDescr | accessible-for-notify | current | A textual string containing information about the port generated loop back event. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.8 | ScalarhpnicfOltPortAlarmLlidMisFrames | accessible-for-notify | current | the amount of mismatched frames about the LLID mismatch alarm. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.9 | ScalarhpnicfOltPortAlarmBer | accessible-for-notify | current | error bit rate. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.10 | ScalarhpnicfOltPortAlarmFer | accessible-for-notify | current | error frames rate. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.11 | ScalarhpnicfEponOnuRegSilentMac | accessible-for-notify | current | The MAC of silent ONU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.12 | ScalarhpnicfEponOperationResult | accessible-for-notify | current | The result of EPON operation. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.13 | ScalarhpnicfEponOnuLaserState | accessible-for-notify | current | The state of ONU laser. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8 | NodehpnicfEponTrap | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0 | NodehpnicfEponTrapPrefix | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.1 | NotificationhpnicfEponPortAlarmBerTrap | current | A hpnicfEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.2 | NotificationhpnicfEponPortAlarmFerTrap | current | A hpnicfEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.3 | NotificationhpnicfEponErrorLLIDFrameTrap | current | A hpnicfEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.4 | NotificationhpnicfEponLoopBackEnableTrap | current | A hpnicfEponLoopBackEnableTrap notification is sent when the loop back command is committed. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.5 | NotificationhpnicfEponOnuRegistrationErrTrap | current | A hpnicfEponOnuRegistrationErrTrap notification is sent when a ONU register failed. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.6 | NotificationhpnicfEponOamDisconnectionTrap | current | A hpnicfEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.7 | NotificationhpnicfEponEncryptionKeyErrTrap | current | A hpnicfEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.8 | NotificationhpnicfEponRemoteStableTrap | current | A hpnicfEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.9 | NotificationhpnicfEponLocalStableTrap | current | A hpnicfEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.10 | NotificationhpnicfEponOamVendorSpecificTrap | current | A hpnicfEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.11 | NotificationhpnicfEponSoftwareErrTrap | current | A hpnicfEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.12 | NotificationhpnicfEponPortAlarmBerRecoverTrap | current | A hpnicfEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.13 | NotificationhpnicfEponPortAlarmFerRecoverTrap | current | A hpnicfEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.14 | NotificationhpnicfEponErrorLLIDFrameRecoverTrap | current | A hpnicfEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.15 | NotificationhpnicfEponLoopBackEnableRecoverTrap | current | A hpnicfEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.16 | NotificationhpnicfEponOnuRegistrationErrRecoverTrap | current | A hpnicfEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.17 | NotificationhpnicfEponOamDisconnectionRecoverTrap | current | A hpnicfEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.18 | NotificationhpnicfEponEncryptionKeyErrRecoverTrap | current | A hpnicfEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.19 | NotificationhpnicfEponRemoteStableRecoverTrap | current | A hpnicfEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.20 | NotificationhpnicfEponLocalStableRecoverTrap | current | A hpnicfEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.21 | NotificationhpnicfEponOamVendorSpecificRecoverTrap | current | A hpnicfEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.22 | NotificationhpnicfEponSoftwareErrRecoverTrap | current | A hpnicfEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.23 | NotificationhpnicfDot3OamThresholdRecoverEvent | current | A hpnicfDot3OamThresholdRecoverEvent notification is sent when hpnicfDot3OamThresholdEvent is detected and then recoverd. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.24 | NotificationhpnicfDot3OamNonThresholdRecoverEvent | current | A hpnicfDot3OamNonThresholdRecoverEvent notification is sent when hpnicfDot3OamNonThresholdEvent is detected and then recoverd. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.25 | NotificationhpnicfEponOnuRegExcessTrap | current | A hpnicfEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.26 | NotificationhpnicfEponOnuRegExcessRecoverTrap | current | A hpnicfEponOnuRegExcessRecoverTrap notification is sent when hpnicfEponOnuRegExcessTrap is detected and then recoverd. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.27 | NotificationhpnicfEponOnuPowerOffTrap | current | A hpnicfEponOnuPowerOffTrap notification is sent when ONU is power off. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.28 | NotificationhpnicfEponOltSwitchoverTrap | current | A hpnicfEponOltSwithoverTrap notification is sent when OLT switchover is detected. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.29 | NotificationhpnicfEponOltDFETrap | current | A hpnicfEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.30 | NotificationhpnicfEponOltDFERecoverTrap | current | A hpnicfEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.31 | NotificationhpnicfEponOnuSilenceTrap | current | The hpnicfEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.32 | NotificationhpnicfEponOnuSilenceRecoverTrap | current | The hpnicfEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.33 | NotificationhpnicfEponOnuUpdateResultTrap | current | A hpnicfEponUpdateResultTrap notification is sent when an ONU reported its firmware update result. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.34 | NotificationhpnicfEponOnuAutoBindTrap | current | A hpnicfEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.35 | NotificationhpnicfEponOnuPortStpStateTrap | current | A hpnicfEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.36 | NotificationhpnicfEponOnuLaserFailedTrap | current | A hpnicfEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (E… | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.37 | NotificationhpnicfOnuSmlkSwitchoverTrap | current | A hpnicfOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.9 | NodehpnicfEponStat | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1 | TablehpnicfEponStatTable | not-accessible | current | This table contains line code error statistics of epon port. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1 | RowhpnicfEponStatEntry | not-accessible | current | The entry of hpnicfEponStatTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.1 | ColumnhpnicfEponStatFER | read-only | current | The frame error rate of epon port, measured in 1e-9 unit. |
| 1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.2 | ColumnhpnicfEponStatBER | read-only | current | The bit error rate of epon port, measured in 1e-9 unit. |