HPN-ICF-HGMP-MIB
146 objects
This MIB contains objects to manage the hpnicfhgmp operations, which are used on lanswitch products.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfRhw |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.7 | IdentityhpnicfHgmp | This MIB contains objects to manage the hpnicfhgmp operations, which are used on lanswitch products. | ||
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1 | IdentityhpnicfClusterObject | current | This MIB contains objects to manage the cluster operations, which are used on lanswitch products. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.0 | IdentityhpnicfhgmpEventsV2 | current | Definition point for cluster notifications. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.1 | NotificationhpnicfhgmpMemberfailure | current | When a cluster member failure, send a snmp trap to the network management. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.2 | NotificationhpnicfhgmpMemberRecover | current | When a cluster member recover, send a snmp trap to the network management. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.3 | NotificationhpnicfhgmpMemberStatusChange | current | When a cluster member status change, send a snmp trap to the network management. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.4 | NotificationhpnicfhgmpNetTopChange | current | When net topology of this cluster change, send a snmp trap to the network management. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.1 | ScalarhpnicfhgmpSetVLANSecurity | read-write | current | Configure whether to perform the VLAN check inside the cluster. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.2 | ScalarhpnicfhgmpHandShakeInterval | read-write | current | Handshaking interval of the cluster member switches. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.3 | ScalarhpnicfhgmpHandShakeHoldtime | read-write | current | Holdtime of administrator switch and member switch in the cluster. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.4 | ScalarhpnicfhgmpGrpMemberTableChange | read-only | current | Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.5 | ScalarhpnicfhgmpMemberDisconRate | read-only | current | Disconnection times of the member and administrator switches divided by member number times 1000. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.6 | ScalarhpnicfhgmpCmdLanswitchFlag | read-write | current | Administrator switch flag |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.7 | ScalarhpnicfhgmpCmdClusterName | read-write | current | Cluster name of the administrator switch |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.8 | ScalarhpnicfhgmpMngPriIpSegCMIP | read-write | current | The private management IP address of the administrator switch, which can not be modified after the cluster has been created. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.9 | ScalarhpnicfhgmpMngPriIpMask | read-write | current | The private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.10 | ScalarhpnicfhgmpFtpServer | read-write | current | The cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.11 | ScalarhpnicfhgmpTftpServer | read-write | current | The cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.12 | ScalarhpnicfhgmpSnmpHost | read-write | current | The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.13 | ScalarhpnicfhgmpLogHost | read-write | current | Log host of the cluster, which can only be configured and accessed on the administrator switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14 | TablehpnicfhgmpGrpMemberTable | not-accessible | current | Table of cluster member switches |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1 | RowhpnicfhgmpGrpMemberEntry | not-accessible | current | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.1 | ColumnhpnicfhgmpGrpMemberDeviceId | read-only | current | 4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.2 | ColumnhpnicfhgmpGrpMemberSerial | read-only | current | When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.3 | ColumnhpnicfhgmpGrpMemberIpAddr | read-only | current | The private IP addresses of the member switches for the communication inside the cluster. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.4 | ColumnhpnicfhgmpGrpMemberName | read-only | current | Hostname of the member switch |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.5 | ColumnhpnicfhgmpGrpMemberPassword | read-write | current | Member password for joining a cluster |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.6 | ColumnhpnicfhgmpGrpMemberPlatform | read-only | current | Set the hardware platform. A null string indicates the information does not exist in the device adjacency table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.7 | ColumnhpnicfhgmpGrpMemberStatus | read-only | current | Member status on the administrator switch, use for displaying the network management status. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.8 | ColumnhpnicfhgmpGrpMemberDisconCount | read-only | current | Count of inside communication disconnection between the member switch and the administrator switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.9 | ColumnhpnicfhgmpGrpMemberEnrollTime | read-only | current | Enrollment time of the member, measured in seconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.10 | ColumnhpnicfhgmpGrpMemberOperate | read-write | current | Operation indication field, indicates the operation of adding/removing a member by the network management agent. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.15 | TablehpnicfhgmpMemberResetTable | not-accessible | current | Reset a member switch in the cluster. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1 | RowhpnicfhgmpMemberResetEntry | not-accessible | current | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.1 | ColumnhpnicfhgmpMemberResetMAC | read-only | current | The management MAC address of the switch to be reset, which is the unique identifier of the switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.2 | ColumnhpnicfhgmpMemberEraseflash | read-write | current | Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.16 | ScalarhpnicfhgmpClusterRole | read-only | current | This switch's role in cluster. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.17 | ScalarhpnicfhgmpClusterMaxPoolNum | read-only | current | Max switch members that the cluster can support(include administrator switch). |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.18 | ScalarhpnicfhgmpClusterCmdSwMac | read-only | current | The MAC address of administrator switch. It will be filled with zero when not be a member of cluster. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.19 | ScalarhpnicfhgmpRun | read-write | current | Enable cluster on this switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.22 | NodehpnicfhgmpProtocolMac | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.22.1 | ScalarhpnicfhgmpClusterProtocolMac | read-write | current | Protocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23 | NodehpnicfhgmpTopologyManagement | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1 | TablehpnicfhgmpWhitelistTable | not-accessible | current | Cluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white … |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1 | RowhpnicfhgmpWhitelistEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.1 | ColumnhpnicfhgmpWhitelistDeviceId | not-accessible | current | Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.2 | ColumnhpnicfhgmpWhitelistSerial | read-only | current | When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.3 | ColumnhpnicfhgmpWhitelistRowStatus | read-create | current | The row status of this table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2 | TablehpnicfhgmpWhitelistNbTable | not-accessible | current | Cluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white l… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1 | RowhpnicfhgmpWhitelistNbEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.1 | ColumnhpnicfhgmpWhitelistNbIndex | not-accessible | current | Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.2 | ColumnhpnicfhgmpWhitelistNbDeviceId | read-only | current | Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes … |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.3 | ColumnhpnicfhgmpWhitelistPortName | read-only | current | The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.4 | ColumnhpnicfhgmpWhitelistNbPortName | read-only | current | The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3 | TablehpnicfhgmpBlacklistTable | not-accessible | current | Cluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1 | RowhpnicfhgmpBlacklistEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.1 | ColumnhpnicfhgmpBlacklistDeviceId | not-accessible | current | Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.2 | ColumnhpnicfhgmpBlacklistAccessDeviceId | read-only | current | Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the b… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.3 | ColumnhpnicfhgmpBlacklistAccessPortName | read-only | current | The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means inval… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.4 | ColumnhpnicfhgmpBlacklistRowStatus | read-create | current | The row status of this table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24 | TablehpnicfhgmpMemberPriPortTable | not-accessible | current | This table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with spe… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1 | RowhpnicfhgmpMemberPriPortEntry | not-accessible | current | Information about a specified member private port entry. The indexes of the entry are hpnicfhgmpGrpMemberDevId and hpnicfhgmpMemberPriPortProto, which indicate… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.1 | ColumnhpnicfhgmpMemberDevId | read-only | current | Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY'… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.2 | ColumnhpnicfhgmpMemberPriPortProto | not-accessible | current | The index of this table. Each instance value of this object corresponds to a different protocol. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.3 | ColumnhpnicfhgmpMemberPriPortProtoDescr | read-only | current | It describes the hpnicfhgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hpnicfhgmpMemberPriPortProtocol value is 1. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.4 | ColumnhpnicfhgmpMemberPriPortNum | read-only | current | The private port number of member switch, used by specified hpnicfhgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, … |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2 | IdentityhpnicfStackObject | current | This MIB contains objects to manage the stack operations, which is used on lanswitch products. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.0 | IdentityhpnicfhgmpStackEventsV2 | current | Definition point for Stack notifications. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.1 | NotificationhpnicfhgmpStackMemberfailure | current | When a stack member failure, send a snmp trap to the network management. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.2 | NotificationhpnicfhgmpStackMemberRecover | current | When a stack member Recover, send a snmp trap to the network management. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.3 | NotificationhpnicfhgmpStackMemberStatusChange | current | When a stack member status change, send a snmp trap to the network management. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.1 | ScalarhpnicfhgmpStackMemberTableChange | read-only | current | Change identifier of the stack member table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.2 | ScalarhpnicfhgmpStackMemberDisconRate | read-only | current | Disconnection rate of the stack member switches. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.3 | ScalarhpnicfhgmpMainLanswitchFlag | read-write | current | The status of the local switch in the stack. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.4 | ScalarhpnicfhgmpStackIpPoolStartIP | read-write | current | The first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.5 | ScalarhpnicfhgmpStackIpPoolLength | read-write | current | The length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6 | TablehpnicfhgmpStackMemberTable | not-accessible | current | Stack member table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1 | RowhpnicfhgmpStackMemberEntry | not-accessible | current | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.1 | ColumnhpnicfhgmpStackMemberDeviceId | read-only | current | 2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.2 | ColumnhpnicfhgmpStackMemberSerial | read-only | current | When adding a member switch to the stack, the master switch will assign an unique integer to identify it. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.3 | ColumnhpnicfhgmpStackMemberIpAddr | read-only | current | The private member IP address for the communication inside the stack. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.4 | ColumnhpnicfhgmpStackMemberName | read-only | current | Hostname of the member switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.5 | ColumnhpnicfhgmpStackMemberPassword | read-only | current | Member password for joining a stack. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.6 | ColumnhpnicfhgmpStackMemberPlatform | read-only | current | Set the hardware platform. A null string indicates the information does not exist in the device adjacency table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.7 | ColumnhpnicfhgmpStackMemberStatus | read-only | current | Member status on the master switch, use for displaying the network management status. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.8 | ColumnhpnicfhgmpStackMemberDisconCount | read-only | current | Count of inside communication disconnection between the member switch and the master switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.9 | ColumnhpnicfhgmpStackMemberEnrollTime | read-only | current | Enrollment time of the member, measured in seconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.7 | ScalarhpnicfhgmpStackRole | read-only | current | This switch's role status in stack. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.8 | ScalarhpnicfhgmpStackMaxPoolNum | read-only | current | Max switch members in one stack that the switch support (include main switch). |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.9 | ScalarhpnicfhgmpStackMainSwMac | read-only | current | The MAC address of main switch. It will be 00.00.00 when not be a member of stack. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.2.10 | ScalarhpnicfhgmpStackIpPoolMask | read-write | current | The mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4 | IdentityhpnicfNTDPObject | current | This MIB contains objects to manage the ntdp operations, which are used on lanswitch products. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.1 | ScalarhpnicfhgmpNTDPCollectTopTime | read-write | current | Topology collection interval of the administrator switch of the cluster, measured in minutes. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.2 | ScalarhpnicfhgmpNTDPHopRange | read-write | current | Range of the topology collection of the administrator switch |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.3 | ScalarhpnicfhgmpNTDPRun | read-write | current | Enable/Disable the NTDP function on the switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.4 | ScalarhpnicfhgmpNTDPPortDelay | read-write | current | Set the delay to forward the topology request via the ports, measured in milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.5 | ScalarhpnicfhgmpNTDPHopDelay | read-write | current | Set the delay to forward the topology request from every hop, measured in milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.6 | ScalarhpnicfhgmpNTDPLastTopCollectDuration | read-only | current | Duration of the latest overall topology collection, a performance count measured in seconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.7 | ScalarhpnicfhgmpNTDPCacheChange | read-only | current | Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not acce… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.8 | ScalarhpnicfhgmpNTDPTOPTableChange | read-only | current | Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not ac… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.9 | TablehpnicfhgmpNTDPInterfaceTable | not-accessible | current | Enable/Disable the NTDP on the switch port. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1 | RowhpnicfhgmpNTDPInterfaceEntry | not-accessible | current | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.1 | ColumnhpnicfhgmpNTDPInterfaceIfIndex | read-only | current | Unique identifier an interface of the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.2 | ColumnhpnicfhgmpNTDPInterfaceEnable | read-write | current | If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10 | TablehpnicfhgmpNTDPCacheTable | not-accessible | current | Access the information about the switch from the topology table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1 | RowhpnicfhgmpNTDPCacheEntry | not-accessible | current | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.1 | ColumnhpnicfhgmpNTDPCacheHashIndex | read-only | current | Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.2 | ColumnhpnicfhgmpNTDPCacheDeviceID | read-only | current | 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.3 | ColumnhpnicfhgmpNTDPCacheClusterName | read-only | current | Name of the cluster including the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.4 | ColumnhpnicfhgmpNTDPCacheClusterRole | read-only | current | Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independ… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.5 | ColumnhpnicfhgmpNTDPCacheCapabilities | read-only | current | The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.6 | ColumnhpnicfhgmpNTDPCacheVersion | read-only | current | The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.7 | ColumnhpnicfhgmpNTDPCachePlatform | read-only | current | Hardware platform. A null string indicates that the field was not included in the latest NTDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.8 | ColumnhpnicfhgmpNTDPCacheMngVLAN | read-only | current | The management VLAN ID of the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.9 | ColumnhpnicfhgmpNTDPCacheHop | read-only | current | Hops to this switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11 | TablehpnicfhgmpNTDPTopTable | not-accessible | current | Access the topology structure collected by the NTDP. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1 | RowhpnicfhgmpNTDPTopEntry | not-accessible | current | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.1 | ColumnhpnicfhgmpNTDPTopHashIndex | read-only | current | Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.2 | ColumnhpnicfhgmpNTDPTopEdgeStartDevID | read-only | current | 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.3 | ColumnhpnicfhgmpNTDPTopEdgeIndex | read-only | current | Edge index of this entry in the data structure. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.4 | ColumnhpnicfhgmpNTDPTopEdgeEndDevID | read-only | current | 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.5 | ColumnhpnicfhgmpNTDPTopEdgeStartPort | read-only | current | The number of the first port of a topology edge. Interface type + card number / slot number / sequence number. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.6 | ColumnhpnicfhgmpNTDPTopEdgeStartPortFullDuplex | read-only | current | The full-duplex status of the first port on a topology edge. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.7 | ColumnhpnicfhgmpNTDPTopEdgeStartPortSpeed | read-only | current | The speed of the first port on a topology edge. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.8 | ColumnhpnicfhgmpNTDPTopEdgeEndPort | read-only | current | The number of the last port of a topology edge. Interface type + card number / slot number / sequence number. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.11 | ColumnhpnicfhgmpNTDPTopLinkStatus | read-only | current | In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belo… |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5 | IdentityhpnicfNDPObject | current | This MIB contains objects to manage the ndp operations, which are used on lanswitch products. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.1 | ScalarhpnicfNDPStatus | read-write | current | NDP protocol module enable flag |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.2 | ScalarhpnicfNDPHelloTimer | read-write | current | NDP packet transmission interval, measured in seconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.3 | ScalarhpnicfNDPAgingTime | read-write | current | How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.4 | ScalarhpnicfNDPChange | read-only | current | Change identifier of the Neighbor table |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.5 | TablehpnicfNDPPortTable | not-accessible | current | Configure to enable/disable the interface NDP of the switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1 | RowhpnicfNDPPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.1 | ColumnhpnicfNDPIfIndex | read-only | current | Unique identifier of an interface of the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.2 | ColumnhpnicfNDPPortStatus | read-write | current | If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6 | TablehpnicfNDPPortNbTable | not-accessible | current | NDP neighbor information on the switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1 | RowhpnicfNDPPortNbEntry | not-accessible | current | |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.1 | ColumnhpnicfNDPPortNbDeviceId | read-only | current | 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.2 | ColumnhpnicfNDPPortNbPortName | read-only | current | Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / … |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.3 | ColumnhpnicfNDPPortNbDeviceName | read-only | current | Device name. A null string indicates that the field was not included in the latest NDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.4 | ColumnhpnicfNDPPortNbPortMode | read-only | current | The neighbor port duplex mode. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.5 | ColumnhpnicfNDPPortNbProductVer | read-only | current | Product version. A null string indicates that the field was not included in the latest NDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.6 | ColumnhpnicfNDPPortNbHardVer | read-only | current | Hardware version. A null string indicates that the field was not included in the latest NDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.7 | ColumnhpnicfNDPPortNbBootromVer | read-only | current | Bootrom version. A null string indicates that the field was not included in the latest NDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.8 | ColumnhpnicfNDPPortNbSoftVer | read-only | current | Software version. A null string indicates that the field was not included in the latest NDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.9 | ColumnhpnicfNDPPortNbAgingtime | read-only | current | How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds. |