HPN-ICF-HPEOC-MIB
80 objects
The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfCommon |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.84 | IdentityhpnicfHPEOC | The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specifi… | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1 | NodehpnicfHPEOCSystem | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.1 | ScalarhpnicfHPEOCCltVlanType | read-write | current | Control EOC CLT's VLAN type, ieee8021q : 802.1q VLAN mode, portbased : portbased VLAN mode. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.2 | TablehpnicfHPEOCCltVlanManTable | not-accessible | current | This table implements the management of CLT(Coax Line Terminal) VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1 | RowhpnicfHPEOCCltVlanManEntry | not-accessible | current | The entry of the table hpnicfHPEOCCltVlanManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1.1 | ColumnhpnicfHPEOCCltEthPortType | read-write | current | Control CLT ethernet ports' type, normal : port which used for normal translation, debug : port which used for debug. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.3 | TablehpnicfHPEOCCltSysManTable | not-accessible | current | This table implements the management of CLT(Coax Line Terminal). |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1 | RowhpnicfHPEOCCltSysManEntry | not-accessible | current | The entry of the table hpnicfHPEOCCltSysManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.1 | ColumnhpnicfHPEOCCltDescr | read-write | current | Set the description of CLT. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.2 | ColumnhpnicfHPEOCCltFwVersion | read-only | current | EOC firmware version. If the object length is zero, it means the version is unknown. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.3 | ColumnhpnicfHPEOCCltLinkState | read-only | current | The cable port's link state. The physicaldown(1) state indicates that the CLT is not powered on. The linkdown(2) state indicates that the CLT is powered on, bu… |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.4 | TablehpnicfHPEOCCnuSysManTable | not-accessible | current | This table implements the management of CNUs. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1 | RowhpnicfHPEOCCnuSysManEntry | not-accessible | current | The entry of the table hpnicfHPEOCCnuSysManTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.1 | ColumnhpnicfHPEOCCnuBcastControl | read-write | current | Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.2 | ColumnhpnicfHPEOCCnuAnonymStatus | read-only | current | Anonymity status. true(1) - the user which uses the CNU is anonymous. false(2) - the user which uses the CNU has an account. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.3 | ColumnhpnicfHPEOCCnuMacLimit | read-write | current | Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC… |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.5 | ScalarhpnicfHPEOCCltAutoUpgrade | read-write | current | Auto upgrade Status. true(1) - The firmware of the CNU will be auto changed by CLT. false(2)- The firmware of the CNU will not be auto changed. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.6 | ScalarhpnicfHPEOCOnLineCnuNumber | read-only | current | The total number of the online CNU(s). |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.7 | ScalarhpnicfHPEOCCpuMacAddress | read-only | current | EOC CPU's MAC address. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.8 | ScalarhpnicfHPEOCOffLineCnuNumber | read-only | current | The total number of the offline CNU(s). |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.9 | ScalarhpnicfHPEOCDownLoadCNUFWResult | accessible-for-notify | current | Download CNU firmware result. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.10 | ScalarhpnicfHPEOCCltAutoUpgradeType | read-write | current | Type of auto upgrade status. It depends on hpnicfHPEOCCltAutoUpgrade status. flash - The CLT auto upgrade the firmware inside its flash to the CNUs. ftp - Firs… |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.11 | NodehpnicfHPEOCAutoUpObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.1 | ScalarhpnicfHPEOCServerAddress | read-write | current | The address of remote host acting as server for operation. The default value is 0.0.0.0 |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.2 | ScalarhpnicfHPEOCServerUser | read-write | current | When using ftp to transfer files, the user name must be specified through this node. It contains 1 to 30 characters. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.3 | ScalarhpnicfHPEOCServerPassword | read-write | current | Remote user password for copying via ftp protocol. Optionally, this object may be ignored for protocols other than ftp. It contains 1 to 31 characters. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.12 | ScalarhpnicfHPEOCCltLoopbackDetect | read-write | current | Loopback detect Status. true(1) - The loopback detect is enabled. false(0)- The loopback detect is disabled. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.1.13 | ScalarhpnicfHPEOCTemplateEnable | read-write | current | Use template for white-list cnu. true(1) - Use template is enabled. false(0)- Use template detect is disabled. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2 | NodehpnicfHPEOCCableInfo | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1 | TablehpnicfHPEOCCableInfoTable | not-accessible | current | This table defines the primary parameters of the cable information. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1 | RowhpnicfHPEOCCableInfoEntry | not-accessible | current | The entry of the table hpnicfHPEOCCableInfoTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.1 | ColumnhpnicfHPEOCFECErrors | read-only | current | The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. It's a technology of controlling errors. Packets in transmission is che… |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.2 | ColumnhpnicfHPEOCAvgBitsPerCarrier | read-only | current | The cable port's average bits per carrier. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.3 | ColumnhpnicfHPEOCAvgSNRPerCarrier | read-only | current | The cable port's signal noise ratio(SNR) bits per carrier. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.4 | ColumnhpnicfHPEOCAvgInPBCRCErrors | read-only | current | The input PB CRC errors on average. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.5 | ColumnhpnicfHPEOCInTotalPkts | read-only | current | The total number of packets(including bad packets) received on this interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.6 | ColumnhpnicfHPEOCAvgOutPower | read-only | current | The cable port's power sent on average, the unit is db. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.7 | ColumnhpnicfHPEOCAvgOutPBCRCErrors | read-only | current | The cable port's physical block(PB) cyclic redundancy check(CRC) errors sent on average. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.8 | ColumnhpnicfHPEOCOutTotalPkts | read-only | current | The total count of the packets(including bad packets) sent on this interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.2 | TablehpnicfHPEOCBitPerSymbolTable | not-accessible | current | This table defines the bits per symbol parameters of the cable line. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1 | RowhpnicfHPEOCBitPerSymbolEntry | not-accessible | current | The entry of the table hpnicfHPEOCBitPerSymbolTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.1 | ColumnhpnicfHPEOCBitPerSymbolIndex | not-accessible | current | The index of the hpnicfHPEOCBitPerSymbolTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.2 | ColumnhpnicfHPEOCBitPerSymbol | read-only | current | hpnicfHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable… |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3 | NodehpnicfHPEOCTemplate | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1 | TablehpnicfHPEOCTemplateGlobalTable | not-accessible | current | This table defines the global parameters of the Template information. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1 | RowhpnicfHPEOCTemplateGlobalEntry | not-accessible | current | The entry of the table hpnicfHPEOCTemplateGlobalTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.1 | ColumnhpnicfHPEOCTemplateIndex | read-create | current | The index of cable Template. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.2 | ColumnhpnicfHPEOCTemplateType | read-create | current | The cable Template's type, can not change after create it. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.3 | ColumnhpnicfHPEOCTemplateName | read-write | current | The cable Template's name, it's recommended to set it uniquely and understandably. Length: 1 to 15 characters. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.4 | ColumnhpnicfHPEOCTemplateDescr | read-write | current | The cable Template's description. Length: 0 to 63 characters. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.5 | ColumnhpnicfHPEOCTemplateCnuMaxDownBW | read-write | current | Maximum downstream bandwidth allowed for the CNU, measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.6 | ColumnhpnicfHPEOCTemplateCnuMaxUpBW | read-write | current | Maximum upstream bandwidth allowed for the CNU, measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.7 | ColumnhpnicfHPEOCTemplateCnuBcastControl | read-write | current | Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.8 | ColumnhpnicfHPEOCTemplateCnuMacLimit | read-write | current | Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC… |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.9 | ColumnhpnicfHPEOCTemplateCb201VlanEn | read-write | current | Use for Cb201 cnu only. true(1) - Enable vlan insert function. false(2) - Disable vlan insert function. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.10 | ColumnhpnicfHPEOCTemplateRowStatus | read-create | current | Operation status. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2 | TablehpnicfHPEOCTemplateSwitchTable | not-accessible | current | This table defines the port parameters of the switch type cnu. it's not affect on the type of gateway Template. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1 | RowhpnicfHPEOCTemplateSwitchEntry | not-accessible | current | The entry of the table hpnicfHPEOCTemplateSwitchTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.1 | ColumnhpnicfHPEOCTemplateUniIndex | not-accessible | current | The index value which uniquely identifies the FE interface of the CNU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.2 | ColumnhpnicfHPEOCTemplateUniSpeed | read-write | current | User network interface speed. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.3 | ColumnhpnicfHPEOCTemplateUniDuplex | read-write | current | User network interface mode. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.4 | ColumnhpnicfHPEOCTemplateUniPriority | read-write | current | The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.5 | ColumnhpnicfHPEOCTemplateUniFlowControl | read-write | current | Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.6 | ColumnhpnicfHPEOCTemplateUniUpLineRate | read-write | current | The max speed upload in units of 1,024 bits per second on this interface. The value should between 0 and 8Mbps. If the value is 0, it means that the upload spe… |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.7 | ColumnhpnicfHPEOCTemplateUniDownLineRate | read-write | current | The max speed download in units of 1,024 bits per second on this interface. The value should between 0 and 8Mbps. If the value is 0, it means that the download… |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.8 | ColumnhpnicfHPEOCTemplateUniAdminStatus | read-write | current | Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets … |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.9 | ColumnhpnicfHPEOCTemplateUniVLANType | read-write | current | port vlan types. hybrid (3) port can carry multiple VLANs. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.10 | ColumnhpnicfHPEOCTemplateUniPvid | read-write | current | The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.11 | ColumnhpnicfHPEOCTemplateUniVlanTag | read-write | current | VLAN is set tagged or untagged. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4 | NodehpnicfHPEOCCnuAccess | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4.1 | TablehpnicfHPEOCCnuAccessTable | not-accessible | current | This table defines the global parameters of the cnu type permitting to access. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1 | RowhpnicfHPEOCCnuAccessEntry | not-accessible | current | The entry of the table hpnicfHPEOCCnuAccessTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.1 | ColumnhpnicfHPEOCCnuAccessIndex | read-create | current | The index value which uniquely identifies the manuinfo of the CNU. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.2 | ColumnhpnicfHPEOCCnuHFID | read-write | current | The Cnu's HFID. Every type Cnu has it's unique HFID. Length: 1 to 64 characters. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.3 | ColumnhpnicfHPEOCManuInfo | read-write | current | The Cnu's manufactory infofamiont. Length: 0 to 63 characters. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.4 | ColumnhpnicfHPEOCCnuType | read-write | current | The Cnu's function type. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.5 | ColumnhpnicfHPEOCCnuSwitchType | read-write | current | The Cnu's switch chip type. It's useless for gataway type cnu. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.6 | ColumnhpnicfHPEOCCnuUniNum | read-write | current | Uni number of the Cnu. It's useless for gataway type cnu. |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.7 | ColumnhpnicfHPEOCCnuPhy2Uni | read-write | current | Reflection from phy port to uni port of the cnu. It's useless for gataway type cnu. For example, phy port 0,1,2,3 is reflect to uni port 1,2,3,4, then the valu… |
| 1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.8 | ColumnhpnicfHPEOCCnuAccessRowStatus | read-create | current | Operation status. |