HPN-ICF-IF-EXT-MIB
81 objects
This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detailed information.
Imported Objects
| HCNUM-TC | CounterBasedGauge64 |
| HPN-ICF-OID-MIB | hpnicfCommon |
| IF-MIB | ifDescr ifIndex |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.40 | IdentityhpnicfIfExt | This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used onl… | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.1 | NodehpnicfIfExtScalarGroup | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.1.1 | ScalarhpnicfIfStatGlobalFlowInterval | read-write | current | Sampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.1.2 | ScalarhpnicfIfShutDownInterval | read-write | current | Set the port status detection timer. The device starts a port status detection timer when a port is shut down by a protocol. Once the timer expires, the device… |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2 | NodehpnicfIfExtGroup | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1 | NodehpnicfIfStat | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.1 | NodehpnicfIfStatScalarGroup | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2 | NodehpnicfIfStatTable | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1 | TablehpnicfIfFlowStatTable | not-accessible | current | This table contains objects to get statistic information of interfaces on a device. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1 | RowhpnicfIfFlowStatEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.1 | ColumnhpnicfIfStatFlowInterval | read-write | current | Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.2 | ColumnhpnicfIfStatFlowInBits | read-only | current | In bits in the specific interval. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.3 | ColumnhpnicfIfStatFlowOutBits | read-only | current | Out bits in specific interval. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.4 | ColumnhpnicfIfStatFlowInPkts | read-only | current | In Packets in the specific interval. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.5 | ColumnhpnicfIfStatFlowOutPkts | read-only | current | Out packets in the specific interval. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.6 | ColumnhpnicfIfStatFlowInBytes | read-only | current | In bytes in the specific interval. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.7 | ColumnhpnicfIfStatFlowOutBytes | read-only | current | Out bytes in the specific interval. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2 | TablehpnicfIfSpeedStatTable | not-accessible | current | This table contains objects to get average speed information in the specific interval of interfaces on a device. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1 | RowhpnicfIfSpeedStatEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.1 | ColumnhpnicfIfSpeedStatInterval | read-write | current | Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.2 | ColumnhpnicfIfSpeedStatInPkts | read-only | current | Average of input packets per second in the specific interval by hpnicfIfSpeedStatInterval. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.3 | ColumnhpnicfIfSpeedStatOutPkts | read-only | current | Average of output packets per second in the specific interval by hpnicfIfSpeedStatInterval. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.4 | ColumnhpnicfIfSpeedStatInBytes | read-only | current | Average of input bytes per second in the specific interval by hpnicfIfSpeedStatInterval. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.5 | ColumnhpnicfIfSpeedStatOutBytes | read-only | current | Average of output bytes per second in the specific interval by hpnicfIfSpeedStatInterval. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3 | TablehpnicfIfHCFlowStatTable | not-accessible | current | This table contains objects to get statistic information of interfaces on a device. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1 | RowhpnicfIfHCFlowStatEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.1 | ColumnhpnicfIfStatFlowHCInBits | read-only | current | In bits in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBits. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.2 | ColumnhpnicfIfStatFlowHCOutBits | read-only | current | Out bits in specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBits. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.3 | ColumnhpnicfIfStatFlowHCInPkts | read-only | current | In Packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInPkts. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.4 | ColumnhpnicfIfStatFlowHCOutPkts | read-only | current | Out packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutPkts. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.5 | ColumnhpnicfIfStatFlowHCInBytes | read-only | current | In bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBytes. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.6 | ColumnhpnicfIfStatFlowHCOutBytes | read-only | current | Out bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBytes. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2 | NodehpnicfIfControl | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1 | TablehpnicfRTParentIfTable | not-accessible | current | This table contains all interfaces that can create sub interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1 | RowhpnicfRTParentIfEntry | not-accessible | current | This entry describes a interface that can create sub interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.1 | ColumnhpnicfRTParentIfIndex | not-accessible | current | The index of interface that can creat sub interface. The value is the same as ifIndex value for this interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.2 | ColumnhpnicfRTMinSubIfOrdinal | read-only | current | The minimum ordinal of the sub interface can be created. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.3 | ColumnhpnicfRTMaxSubIfOrdinal | read-only | current | The max ordinal of the sub interface can be created. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2 | TablehpnicfRTSubIfTable | not-accessible | current | This table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by hpnicfRTSubIfParentIfI… |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1 | RowhpnicfRTSubIfEntry | not-accessible | current | The hpnicfRTSubIfTable entry items |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.1 | ColumnhpnicfRTSubIfParentIfIndex | not-accessible | current | The parent interface index. The value should be the same as the hpnicfRTParentIfIndex. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.2 | ColumnhpnicfRTSubIfOrdinal | not-accessible | current | The ordinal of sub interface. It should between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.3 | ColumnhpnicfRTSubIfSubIfIndex | read-only | current | The ifIndex value of the sub interface |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.4 | ColumnhpnicfRTSubIfSubIfDesc | read-only | current | The name of the interface |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.5 | ColumnhpnicfRTSubIfRowStatus | read-create | current | Operation status. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3 | TablehpnicfIfLinkModeTable | not-accessible | current | This table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet i… |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1 | RowhpnicfIfLinkModeEntry | not-accessible | current | The interface link mode table entry |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.1 | ColumnhpnicfIfLinkModeIndex | not-accessible | current | The value is same as ifIndex. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.2 | ColumnhpnicfIfLinkMode | read-write | current | The current link mode of the interface If hpnicfIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.3 | ColumnhpnicfIfLinkModeSwitchSupport | read-only | current | Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interf… |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3 | NodehpnicfIfInterfaces | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.1 | ScalarhpnicfIfPhysicalNumber | read-only | current | Represents the number of physical interfaces in the device. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2 | TablehpnicfIfTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of IfNumber. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1 | RowhpnicfIfEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.1 | ColumnhpnicfIfUpDownTimes | read-only | current | The interface's up/down times, since the device was initialized. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.2 | ColumnhpnicfIfMtu | read-write | current | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.3 | ColumnhpnicfIfBandwidthRate | read-only | current | The rate of the bandwidth for an interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.4 | ColumnhpnicfIfDiscardPktRate | read-only | current | The rate of the discarded packets for an interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.5 | ColumnhpnicfIfStatusKeepTime | read-only | current | The time since the interface entered its current operational state. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.6 | ColumnhpnicfIfInNUcastPkts | read-only | current | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.7 | ColumnhpnicfIfOutNUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.8 | ColumnhpnicfIfIsPoe | read-only | current | Whether the interface supports poe. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.9 | ColumnhpnicfIfOperStatus | read-only | current | Current status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, hpnicfIfOperStatus should be admindown. I… |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.10 | ColumnhpnicfIfDownTimes | read-only | current | Number of times the interface went down, since the device was initialized. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3 | TablehpnicfIfUsingTable | not-accessible | current | A table containing management information applicable to splitting interfaces. To improve port density, reduce costs, and improve network flexibility, a high-ba… |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3.1 | RowhpnicfIfUsingEntry | not-accessible | current | An entry of hpnicfIfUsingTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3.1.1 | ColumnhpnicfIfUsingIndex | not-accessible | current | Index of an interface which can be split into multiple low-bandwidth breakout interfaces or be restored to a high-bandwidth interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3.1.2 | ColumnhpnicfIfUsingSupportType | read-only | current | This object specifies the port type which can be split into or restored to. From lowest bit, each bit corresponds to a port type ('10GE', '20GE', '40GE', '100G… |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3.1.3 | ColumnhpnicfIfUsingType | read-write | current | This object specifies the port type that can be split into or restored to. After this object is set to a none-zero value, the operation returns success in the … |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3.1.4 | ColumnhpnicfIfUsingStatus | read-only | current | After object hpnicfIfUsingType is set to a none-zero value, if the operation does not takes effect before reboot the line card (for distributed devices) or dev… |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3 | NodehpnicfIfExtTrap | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0 | NodehpnicfIfExtTrapPrex | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.1 | NotificationhpnicfIfBandwidthUsageHigh | current | The notification is generated when the rate of the bandwidth for the interface exceeds the upper limit. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.2 | NotificationhpnicfIfDiscardPktRateHigh | current | The notification is generated when the rate of the discarded packets for the interface exceeds the upper limit. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.3 | NotificationhpnicfIfDampeningSuppressed | current | The notification is generated when the interface is suppressed via dampening. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.4 | NotificationhpnicfIfDampeningNotSuppressed | current | The notification is generated when the interface is resumed to not suppressed via dampening. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1 | NodehpnicfIfExtTrapObject | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1 | TablehpnicfIfExtTrapCfgTable | not-accessible | current | The trap configuration table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1 | RowhpnicfIfExtTrapCfgEntry | not-accessible | current | An entry for this table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1.1 | ColumnhpnicfIfBandwidthUpperLimit | read-write | current | The rate of the bandwidth upper limit for an interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1.2 | ColumnhpnicfIfDiscardPktRateUpperLimit | read-write | current | The rate of the discarded packets upper limit for an interface. |