HPN-ICF-IPSEC-MONITOR-MIB
144 objects
The MIB is designed to get statistic information of IPSec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfCommon |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.7 | IdentityhpnicfIPSecMonitor | The MIB is designed to get statistic information of IPSec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels. | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1 | NodehpnicfIPSecObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1 | TablehpnicfIPSecTunnelTable | not-accessible | current | The IPSec Phase-2 Tunnel Table. There is one entry in this table for each active IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1 | RowhpnicfIPSecTunnelEntry | not-accessible | current | Information about hpnicfIPSecTunnelTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.1 | ColumnhpnicfIPSecTunIfIndex | not-accessible | current | The interface index( the ifIndex of ifTable ). |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.2 | ColumnhpnicfIPSecTunEntryIndex | not-accessible | current | The index of IPSec policy applied in the interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.3 | ColumnhpnicfIPSecTunIndex | not-accessible | current | The index of IPSec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value … |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.4 | ColumnhpnicfIPSecTunIKETunnelIndex | read-only | current | The index of the associated IPSec Phase-1 IKE Tunnel (IKETunIndex in the IKETunnelTable). 2147483647 is defined as invalid value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.5 | ColumnhpnicfIPSecTunLocalAddr | read-only | current | The IP address of the local peer for the IPSec Phase-2 Tunnel. 0.0.0.0 is defined as invalid value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.6 | ColumnhpnicfIPSecTunRemoteAddr | read-only | current | The IP address of the remote peer for the IPSec Phase-2 Tunnel. 0.0.0.0 is defined as invalid value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.7 | ColumnhpnicfIPSecTunKeyType | read-only | current | The key negotiate mode used by the IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.8 | ColumnhpnicfIPSecTunEncapMode | read-only | current | The encapsulation mode used by the IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.9 | ColumnhpnicfIPSecTunInitiator | read-only | current | The initiator of this IPSec tunnel. Value none is used for manual IPsec tunnel, for there is no initiator or responder in this method. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.10 | ColumnhpnicfIPSecTunLifeSize | read-only | current | The negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes. 0 is defined as invalid value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.11 | ColumnhpnicfIPSecTunLifeTime | read-only | current | The negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds. 2147483647 is defined as invalid value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.12 | ColumnhpnicfIPSecTunRemainTime | read-only | current | The remain time of SA in seconds. 2147483647 is defined as invalid value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.13 | ColumnhpnicfIPSecTunActiveTime | read-only | current | The duration the IPSec Phase-2 Tunnel has been active in hundredths of seconds. 2147483647 is defined as invalid value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.14 | ColumnhpnicfIPSecTunRemainSize | read-only | current | The remain LifeSize of SA in kilobytes. 0 is defined as invalid value. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.15 | ColumnhpnicfIPSecTunTotalRefreshes | read-only | current | The total number of security association refreshing performed. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.16 | ColumnhpnicfIPSecTunCurrentSaInstances | read-only | current | The number of security associations which are currently active or expiring. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.17 | ColumnhpnicfIPSecTunInSaEncryptAlgo | read-only | current | The encryption algorithm used by the inbound security association of the IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.18 | ColumnhpnicfIPSecTunInSaAhAuthAlgo | read-only | current | The authentication algorithm used by the inbound authentication header (AH) security association of the IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.19 | ColumnhpnicfIPSecTunInSaEspAuthAlgo | read-only | current | The authentication algorithm used by the inbound encapsulation security protocol(ESP) security association of the IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.20 | ColumnhpnicfIPSecTunDiffHellmanGrp | read-only | current | The Diffie Hellman Group used by the security association of the IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.21 | ColumnhpnicfIPSecTunOutSaEncryptAlgo | read-only | current | The encryption algorithm used by the outbound security association of the IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.22 | ColumnhpnicfIPSecTunOutSaAhAuthAlgo | read-only | current | The authentication algorithm used by the outbound authentication header (AH) security association of the IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.23 | ColumnhpnicfIPSecTunOutSaEspAuthAlgo | read-only | current | The authentication algorithm used by the outbound encapsulation security protocol(ESP) security association of the IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.24 | ColumnhpnicfIPSecTunPolicyName | read-only | current | The policy name used by this IPSec tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.25 | ColumnhpnicfIPSecTunPolicyNum | read-only | current | The sequence number of policy used by this IPSec tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.26 | ColumnhpnicfIPSecTunStatus | read-only | current | The status of the IPSec Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2 | TablehpnicfIPSecTunnelStatTable | not-accessible | current | The IPSec Phase-2 Tunnel Statistics Table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1 | RowhpnicfIPSecTunnelStatEntry | not-accessible | current | Information about hpnicfIPSecTunnelStatTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.1 | ColumnhpnicfIPSecTunInOctets | read-only | current | The total number of octets received by this IPSec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.2 | ColumnhpnicfIPSecTunInDecompOctets | read-only | current | The total number of decompressed octets received by this IPSec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.3 | ColumnhpnicfIPSecTunInPkts | read-only | current | The total number of packets received by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.4 | ColumnhpnicfIPSecTunInDropPkts | read-only | current | The total number of packets dropped during receiving process by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.5 | ColumnhpnicfIPSecTunInReplayDropPkts | read-only | current | The total number of packets dropped during receiving process due to Anti-Replay process by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.6 | ColumnhpnicfIPSecTunInAuthFails | read-only | current | The total number of inbound authentication's which ended in failure by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.7 | ColumnhpnicfIPSecTunInDecryptFails | read-only | current | The total number of inbound decryption's which ended in failure by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.8 | ColumnhpnicfIPSecTunOutOctets | read-only | current | The total number of octets sent by this IPSec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.9 | ColumnhpnicfIPSecTunOutUncompOctets | read-only | current | The total number of uncompressed octets sent by this IPSec Phase-2 Tunnel.This value is accumulated BEFORE the packet is compressed. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.10 | ColumnhpnicfIPSecTunOutPkts | read-only | current | The total number of packets sent by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.11 | ColumnhpnicfIPSecTunOutDropPkts | read-only | current | The total number of packets dropped during sending process by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.12 | ColumnhpnicfIPSecTunOutEncryptFails | read-only | current | The total number of outbound encryption's which ended in failure by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.13 | ColumnhpnicfIPSecTunNoMemoryDropPkts | read-only | current | The total number of packets dropped due to no enough memory by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.14 | ColumnhpnicfIPSecTunQueueFullDropPkts | read-only | current | The total number of packets dropped due to queue full by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.15 | ColumnhpnicfIPSecTunInvalidLenDropPkts | read-only | current | The total number of packets dropped due to invalid length packet by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.16 | ColumnhpnicfIPSecTunTooLongDropPkts | read-only | current | The total number of packets dropped due to too long packet by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.17 | ColumnhpnicfIPSecTunInvalidSaDropPkts | read-only | current | The total number of packets dropped due to invalid SA by this IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3 | TablehpnicfIPSecSaTable | not-accessible | current | The IPSec Phase-2 Security Protection Index Table. This table contains an entry for each active and expiring security association. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1 | RowhpnicfIPSecSaEntry | not-accessible | current | Information about hpnicfIPSecSaTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.1 | ColumnhpnicfIPSecSaIndex | not-accessible | current | The number of the Sa associated with the Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Sa associat… |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.2 | ColumnhpnicfIPSecSaDirection | read-only | current | The direction of the SA. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.3 | ColumnhpnicfIPSecSaValue | read-only | current | The value of the SPI. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.4 | ColumnhpnicfIPSecSaProtocol | read-only | current | The security protocol of the SA. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.5 | ColumnhpnicfIPSecSaEncryptAlgo | read-only | current | The encryption algorithm used by the security association of the IPSec Phase-2 Tunnel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.6 | ColumnhpnicfIPSecSaAuthAlgo | read-only | current | The authentication algorithm used by the SA. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.7 | ColumnhpnicfIPSecSaStatus | read-only | current | The status of the SA. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4 | TablehpnicfIPSecTrafficTable | not-accessible | current | The IPSec Phase-2 Tunnel Traffic Table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1 | RowhpnicfIPSecTrafficEntry | not-accessible | current | Information about hpnicfIPSecTrafficTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.1 | ColumnhpnicfIPSecTrafficLocalType | read-only | current | The type of local peer. Possible values are: a single IP address, or an IP address range, or an IP subnet. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.2 | ColumnhpnicfIPSecTrafficLocalAddr1 | read-only | current | The first specification of local peer's IP address. If the local peer type is single IP address, then this is the value of the IP address. If the local peer ty… |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.3 | ColumnhpnicfIPSecTrafficLocalAddr2 | read-only | current | The second specification of local peer's IP address. If the local peer type is single IP address, then this is the value of the IP address. If the local peer t… |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.4 | ColumnhpnicfIPSecTrafficLocalProtocol | read-only | current | The protocol number of the local peer's traffic. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.5 | ColumnhpnicfIPSecTrafficLocalPort | read-only | current | The port number of the local peer's traffic. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.6 | ColumnhpnicfIPSecTrafficRemoteType | read-only | current | The type of remote peer. Possible values are: a single IP address, or an IP address range, or an IP subnet. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.7 | ColumnhpnicfIPSecTrafficRemoteAddr1 | read-only | current | The first specification of remote peer's IP address. If the remote peer type is single IP address, then this is the value of the IP address. If the remote peer… |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.8 | ColumnhpnicfIPSecTrafficRemoteAddr2 | read-only | current | Single IP address, then this is the value of the IP address. If the remote peer type is IP subnet, then this is the value of the subnet mask. If the remote pee… |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.9 | ColumnhpnicfIPSecTrafficRemoteProtocol | read-only | current | The protocol number of the remote peer's traffic. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.10 | ColumnhpnicfIPSecTrafficRemotePort | read-only | current | The port number of the remote peer's traffic. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5 | NodehpnicfIPSecGlobalStats | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.1 | ScalarhpnicfIPSecGlobalActiveTunnels | read-only | current | The total number of currently active IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.2 | ScalarhpnicfIPSecGlobalActiveSas | read-only | current | The total number of currently active or expiring IPSec Phase-2 SA. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.3 | ScalarhpnicfIPSecGlobalInOctets | read-only | current | The total number of octets received by all current and previous IPSec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet s… |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.4 | ScalarhpnicfIPSecGlobalInDecompOctets | read-only | current | The total number of decompressed octets received by all current and previous IPSec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.5 | ScalarhpnicfIPSecGlobalInPkts | read-only | current | The total number of packets received by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.6 | ScalarhpnicfIPSecGlobalInDrops | read-only | current | The total number of packets dropped during receiving process by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.7 | ScalarhpnicfIPSecGlobalInReplayDrops | read-only | current | The total number of packets dropped during receiving process due to Anti-Replay process by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.8 | ScalarhpnicfIPSecGlobalInAuthFails | read-only | current | The total number of inbound authentication's which ended in failure by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.9 | ScalarhpnicfIPSecGlobalInDecryptFails | read-only | current | The total number of inbound decryption's which ended in failure by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.10 | ScalarhpnicfIPSecGlobalOutOctets | read-only | current | The total number of octets sent by all current and previous IPSec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should… |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.11 | ScalarhpnicfIPSecGlobalOutUncompOctets | read-only | current | The total number of uncompressed octets sent by all current and previous IPSec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.12 | ScalarhpnicfIPSecGlobalOutPkts | read-only | current | The total number of packets sent by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.13 | ScalarhpnicfIPSecGlobalOutDrops | read-only | current | The total number of packets dropped during sending process by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.14 | ScalarhpnicfIPSecGlobalOutEncryptFails | read-only | current | The total number of outbound encryption's which ended in failure by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.15 | ScalarhpnicfIPSecGlobalNoMemoryDropPkts | read-only | current | The total number of packets dropped due to no enough memory by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.16 | ScalarhpnicfIPSecGlobalNoFindSaDropPkts | read-only | current | The total number of packets dropped due to not find SA by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.17 | ScalarhpnicfIPSecGlobalQueueFullDropPkts | read-only | current | The total number of packets dropped due to queue full by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.18 | ScalarhpnicfIPSecGlobalInvalidLenDropPkts | read-only | current | The total number of packets dropped due to invalid packet length by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.19 | ScalarhpnicfIPSecGlobalTooLongDropPkts | read-only | current | The total number of packets dropped due to too long packet by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.20 | ScalarhpnicfIPSecGlobalInvalidSaDropPkts | read-only | current | The total number of packets dropped due to invalid SA by all current and previous IPSec Phase-2 Tunnels. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.6 | NodehpnicfIPSecTrapObject | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.1 | ScalarhpnicfIPSecPolicyName | accessible-for-notify | current | The IPSec policy name with a trap. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.2 | ScalarhpnicfIPSecPolicySeqNum | accessible-for-notify | current | The IPSec policy sequence number with a trap. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.3 | ScalarhpnicfIPSecPolicySize | accessible-for-notify | current | The number of IPSec policies with a trap. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.4 | ScalarhpnicfIPSecSpiValue | accessible-for-notify | current | The SPI value associated with a trap. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7 | NodehpnicfIPSecTrapCntl | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.1 | ScalarhpnicfIPSecTrapGlobalCntl | read-write | current | Indicates whether all IPSec traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.2 | ScalarhpnicfIPSecTunnelStartTrapCntl | read-write | current | Indicates whether hpnicfIPSecTunnelStart traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.3 | ScalarhpnicfIPSecTunnelStopTrapCntl | read-write | current | Indicates whether hpnicfIPSecTunnelStop traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.4 | ScalarhpnicfIPSecNoSaTrapCntl | read-write | current | Indicates whether hpnicfIPSecNoSaFailure traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.5 | ScalarhpnicfIPSecAuthFailureTrapCntl | read-write | current | Indicates whether hpnicfIPSecAuthFailFailure traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.6 | ScalarhpnicfIPSecEncryFailureTrapCntl | read-write | current | Indicates whether hpnicfIPSecEncryFailFailure traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.7 | ScalarhpnicfIPSecDecryFailureTrapCntl | read-write | current | Indicates whether hpnicfIPSecDecryFailFailure traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.8 | ScalarhpnicfIPSecInvalidSaTrapCntl | read-write | current | Indicates whether hpnicfIPSec Invalid Sa Failure traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.9 | ScalarhpnicfIPSecPolicyAddTrapCntl | read-write | current | Indicates whether hpnicfIPSecPolicyAdd traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.10 | ScalarhpnicfIPSecPolicyDelTrapCntl | read-write | current | Indicates whether hpnicfIPSecPolicyDel traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.11 | ScalarhpnicfIPSecPolicyAttachTrapCntl | read-write | current | Indicates whether hpnicfIPSecPolicyAttach traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.12 | ScalarhpnicfIPSecPolicyDetachTrapCntl | read-write | current | Indicates whether hpnicfIPSecPolicyDetach traps should be generated. |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8 | NodehpnicfIPSecTrap | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1 | NodehpnicfIPSecNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.1 | NotificationhpnicfIPSecTunnelStart | current | This notification is generated when an IPSec Phase-2 Tunnel is created. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.2 | NotificationhpnicfIPSecTunnelStop | current | This notification is generated when an IPSec Phase-2 Tunnel is deleted. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.3 | NotificationhpnicfIPSecNoSaFailure | current | This notification is generated when an IPSec Phase-2 non-existent SA error occurs. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.4 | NotificationhpnicfIPSecAuthFailFailure | current | This notification is generated when the IPSec phase-2 authentication failure occurs. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.5 | NotificationhpnicfIPSecEncryFailFailure | current | This notification is generated when the IPSec phase-2 tunnel has an encrypting failure. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.6 | NotificationhpnicfIPSecDecryFailFailure | current | This notification is generated when the IPSec phase-2 tunnel has a decrypting failure. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.7 | NotificationhpnicfIPSecInvalidSaFailure | current | This notification is generated when the IPSec phase-2 invalid SA failure occurs. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.8 | NotificationhpnicfIPSecPolicyAdd | current | This notification is generated when an IPSec policy is added. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.9 | NotificationhpnicfIPSecPolicyDel | current | This notification is generated when an IPSec policy is deleted. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.10 | NotificationhpnicfIPSecPolicyAttach | current | This notification is generated when an IPSec policy is attached with one interface. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.11 | NotificationhpnicfIPSecPolicyDetach | current | This notification is generated when an IPSec policy is detached with one interface. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2 | NodehpnicfIPSecConformance | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.1 | NodehpnicfIPSecCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.1.1 | CompliancehpnicfIPSecCompliance | current | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2 | NodehpnicfIPSecGroups | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.1 | GrouphpnicfIPSecTunnelTableGroup | current | The group contains the IPSec tunnel's property information. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.2 | GrouphpnicfIPSecTunnelStatGroup | current | The group contains the IPSec tunnel's statistic information. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.3 | GrouphpnicfIPSecSaGroup | current | The group contains the SA's property information. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.4 | GrouphpnicfIPSecTrafficTableGroup | current | The group contains the property information of the data flow protected by IPSec tunnel. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.5 | GrouphpnicfIPSecGlobalStatsGroup | current | The group contains all of the IPSec tunnel's statistic information. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.6 | GrouphpnicfIPSecTrapObjectGroup | current | The group contains all of trap objects of IPSec tunnels. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.7 | GrouphpnicfIPSecTrapCntlGroup | current | The group contains all of trap switches of IPSec tunnels. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.8 | GrouphpnicfIPSecTrapGroup | current | The group contains all of trap of IPSec tunnels. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HpnicfAuthAlgo | INTEGER { none(0), md5(1), sha(2), invalidAlg(2147483647) } | current | The authentication algorithm used in the IKE negotiations. invalidAlg(2147483647) is defined as invalid value. |
| HpnicfDiffHellmanGrp | INTEGER { none(0), modp768(1), modp1024(2), modp1536(5), modp2048(14), invalidGroup(2147483647) } | current | The Diffie Hellman Group used in the IKE and IPSec negotiations. invalidGroup(2147483647) is defined as invalid value. |
| HpnicfEncapMode | INTEGER { tunnel(1), transport(2), invalidMode(2147483647) } | current | The encapsulation mode used by an IPSec Phase-2 Tunnel. invalidMode(2147483647) is defined as invalid value. |
| HpnicfEncryptAlgo | INTEGER { none(0), desCbc(1), ideaCbc(2), blowfishCbc(3), rc5R16B64Cbc(4), tripledesCbc(5), castCbc(6), aesCbc(7), nsaCbc(8), aesCbc128(9), aesCbc192(10), aesCbc256(11), invalidAlg(2147483647) } | current | The encryption algorithm used in the IKE and IPSec negotiations. invalidAlg(2147483647) is defined as invalid value. |
| HpnicfIPSecIDType | INTEGER { reserved(0), ipv4Addr(1), fqdn(2), userFqdn(3), ipv4AddrSubnet(4), ipv6Addr(5), ipv6AddrSubnet(6), ipv4AddrRange(7), ipv6AddrRange(8), derAsn1Dn(9), derAsn1Gn(10), keyId(11) } | current | The type of IPSec Identity. |
| HpnicfIPSecNegoType | INTEGER { ike(1), manual(2), invalidType(2147483647) } | current | The type of key used by an IPSec Phase-2 Tunnel. invalidType(2147483647) is defined as invalid value. |
| HpnicfIPSecTunnelState | INTEGER { active(1), timeout(2) } | current | The state of IPSec tunnel. |
| HpnicfSaProtocol | INTEGER { reserved(0), isakmp(1), ah(2), esp(3), ipcomp(4) } | current | The protocol of security association. |
| HpnicfTrafficType | INTEGER { ipv4Addr(1), ipv4AddrSubnet(4), ipv6Addr(5), ipv6AddrSubnet(6), ipv4AddrRange(7), ipv6AddrRange(8) } | current | The type of the data flow. |
| HpnicfTrapStatus | INTEGER { enabled(1), disabled(2) } | current | The switch which determines whether send a trap or not. |