HPN-ICF-LswIGSP-MIB
35 objects
No module-level DESCRIPTION found.
Imported Objects
| HPN-ICF-OID-MIB | hpnicflswCommon |
| IF-MIB | InterfaceIndex |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7 | IdentityhpnicfLswIgmpsnoopingMib | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1 | NodehpnicfLswIgmpsnoopingMibObject | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.1 | ScalarhpnicfIgmpSnoopingStatus | read-write | current | Configure to enable IGMP Snooping. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.2 | ScalarhpnicfIgmpSnoopingRouterPortAge | read-write | current | Configure the aging time of the router port. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.3 | ScalarhpnicfIgmpSnoopingResponseTime | read-write | current | Configure the maximum query response time. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.4 | ScalarhpnicfIgmpSnoopingHostTime | read-write | current | Configure the aging time of the multicast group port. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.5 | TablehpnicfIgmpSnoopingGroupLimitTable | not-accessible | current | The table lists the maximum group number that one interface could do IGMP Snooping. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.5.1 | RowhpnicfIgmpSnoopingGroupLimitEntry | not-accessible | current | An entry (conceptual row) representing the maximum group number on an interface which IGMP Snooping operation is enabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.5.1.1 | ColumnhpnicfIgmpSnoopingGroupIfIndex | not-accessible | current | The ifIndex value of the port on which IGMP snooping is enabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.5.1.2 | ColumnhpnicfIgmpSnoopingGroupLimitNumber | read-write | current | The maxmum group number of IGMP Snooping on a port. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.6 | TablehpnicfIgmpSnoopingFastLeaveTable | not-accessible | current | The table specifies the fast leave status on those ports that do IGMP Snooping. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.6.1 | RowhpnicfIgmpSnoopingFastLeaveEntry | not-accessible | current | An entry specifies the fast leave status on those ports that do IGMP Snooping. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.6.1.1 | ColumnhpnicfIgmpSnoopingFastLeaveIfIndex | not-accessible | current | The ifIndex value of the port on which IGMP snooping is enabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.6.1.2 | ColumnhpnicfIgmpSnoopingFastLeaveStatus | read-write | current | The fast leave status of the port on which IGMP Snooping is enabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7 | TablehpnicfIgmpSnoopingGroupPolicyTable | not-accessible | current | This is a table specifies the group policy parameter and Vlan ID of the IGMP Snooping port. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7.1 | RowhpnicfIgmpSnoopingGroupPolicyEntry | not-accessible | current | An entry representing the group policy parameter and Vlan ID of a port on which IGMP Snooping operation is enabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7.1.1 | ColumnhpnicfIgmpSnoopingGroupPolicyIfIndex | not-accessible | current | The ifIndex value of the port on which IGMP Snooping is enabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7.1.2 | ColumnhpnicfIgmpSnoopingGroupPolicyVlanID | not-accessible | current | The Vlan ID which the IGMP Snooping port is attached to. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7.1.3 | ColumnhpnicfIgmpSnoopingGroupPolicyParameter | read-create | current | The ACL Number which is used as the group policy parameter of the IGMP Snooping port. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7.1.4 | ColumnhpnicfIgmpSnoopingGroupPolicyStatus | read-create | current | This object is used to create or delete a row and represent the current status of this row. Now support three state:CreateAndGo,Active,Destroy. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.8 | ScalarhpnicfIgmpSnoopingNonFloodingStatus | read-write | current | Configure to disable multicast flooding when no member exists in the destinated group. To use this function,IGMP snooping must be enabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.9 | TablehpnicfIgmpSnoopingVlanStatusTable | not-accessible | current | The table used to enable or disable IGMP snooping on the specified VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.9.1 | RowhpnicfIgmpSnoopingVlanStatusEntry | not-accessible | current | An entry representing the IGMP snooping status on the specified VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.9.1.1 | ColumnhpnicfIgmpSnoopingVlanID | not-accessible | current | An index uniquely identifies on which VLAN IGMP snooping is enabled or disabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.9.1.2 | ColumnhpnicfIgmpSnoopingVlanEnabled | read-write | current | Indicating whether IGMP snooping is enabled on this VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10 | NodehpnicfIgmpSnoopingStatsObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.1 | ScalarhpnicfRecvIGMPGQueryNum | read-only | current | The statistics of IGMP general query packets received on the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.2 | ScalarhpnicfRecvIGMPSQueryNum | read-only | current | The statistics of IGMP specific query packets received on the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.3 | ScalarhpnicfRecvIGMPV1ReportNum | read-only | current | The statistics of IGMP V1 report packets received on the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.4 | ScalarhpnicfRecvIGMPV2ReportNum | read-only | current | The statistics of IGMP V2 report packets received on the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.5 | ScalarhpnicfRecvIGMPLeaveNum | read-only | current | The statistics of IGMP leave packets received on the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.6 | ScalarhpnicfRecvErrorIGMPPacketNum | read-only | current | The statistics of error IGMP packets received on the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.7 | ScalarhpnicfSentIGMPSQueryNum | read-only | current | The statistics of IGMP specific query packets sent from the device. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.8 | ScalarhpnicfIgmpSnoopingClearStats | read-write | current | The configuration to clear the statistics of IGMP packets. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |