HPN-ICF-LswMSTP-MIB
85 objects
This MIB defines objects for managing MSTP.
Imported Objects
| BRIDGE-MIB | dot1dStpPort dot1dStpPortEntry |
| HPN-ICF-OID-MIB | hpnicflswCommon |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14 | Identityhpnicfdot1sMstp | This MIB defines objects for managing MSTP. | ||
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.0 | IdentityhpnicfMstpEventsV2 | current | Definition point for Mstp notifications. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.1 | NotificationhpnicfPortMstiStateForwarding | current | The SNMP trap that is generated when a port turns into forwarding state form other state. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.2 | NotificationhpnicfPortMstiStateDiscarding | current | The SNMP trap that is generated when a port turns into discarding state form forwarding state. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.3 | NotificationhpnicfBridgeLostRootPrimary | current | The SNMP trap that is generated when the bridge is no longer the root bridge of the instance. Another switch with higher priority has already been the root bri… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.4 | NotificationhpnicfPortMstiRootGuarded | current | The SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.5 | NotificationhpnicfPortMstiBpduGuarded | current | The SNMP trap is generated when an edged port of the BPDU-guard device receives a BPDU. If the designated bridge ID can't be obtained from the BPDU, the design… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.6 | NotificationhpnicfPortMstiLoopGuarded | current | The SNMP trap that is generated when an Alternate-Port or Root-Port is aged out. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.7 | NotificationhpnicfMstiNewRoot | current | The SNMP trap is generated when the sending device becomes the new root of the spanning tree. The first root bridge ID means the old root bridge ID, and the se… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.8 | NotificationhpnicfPortPvstBpduProtection | current | The SNMP trap is generated when a PVST BPDU is received on an MSTP port that is enabled with the PVST protection feature. If the designated bridge ID can't be … | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.1 | Scalarhpnicfdot1sStpStatus | read-write | current | Whether the Bridge MSTP is enabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.2 | Scalarhpnicfdot1sStpForceVersion | read-write | current | The mode of this Bridge spanning-tree protocol. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.3 | Scalarhpnicfdot1sStpDiameter | read-write | current | The diameter of Bridge. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.4 | Scalarhpnicfdot1sMstBridgeMaxHops | read-write | current | The maximum value of the Bridge hops. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.5 | Scalarhpnicfdot1sMstMasterBridgeID | read-only | current | The Bridge Identifier of the current Master Bridge. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.6 | Scalarhpnicfdot1sMstMasterPathCost | read-only | current | The CIST path cost from the transmitting Bridge to the Master Bridge. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.7 | Scalarhpnicfdot1sMstBpduGuard | read-write | current | Whether the Bridge BPDU Guard function is enabled. If the function is enabled, the port will shutdown when received BPDU and the port is configured as portfast. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.8 | Scalarhpnicfdot1sMstAdminFormatSelector | read-write | current | The administrative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 8… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.9 | Scalarhpnicfdot1sMstAdminRegionName | read-write | current | This MSTP administrative region name. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.10 | Scalarhpnicfdot1sMstAdminRevisionLevel | read-write | current | This MSTP administrative revision level. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.11 | Scalarhpnicfdot1sMstOperFormatSelector | read-only | current | The operative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.12 | Scalarhpnicfdot1sMstOperRegionName | read-only | current | This MSTP operative region name. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.13 | Scalarhpnicfdot1sMstOperRevisionLevel | read-only | current | This MSTP operative revision level. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.14 | Scalarhpnicfdot1sMstOperConfigDigest | read-only | current | This MSTP Region's Configuration Digest Signature Key. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.15 | Scalarhpnicfdot1sMstRegionConfActive | read-write | current | Active the region configuration. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.16 | Scalarhpnicfdot1sMstDefaultVlanAllo | read-write | current | Set default configuration about VLAN allocation and all VLANs are mapped to CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.17 | Scalarhpnicfdot1sMstDefaultRegionName | read-write | current | Set default region name. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.18 | Tablehpnicfdot1sVIDAllocationTable | not-accessible | current | MSTP VLAN-to-instance mapping table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1 | Rowhpnicfdot1sVIDAllocationEntry | not-accessible | current | MSTP VLAN-to-instance mapping table entry. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.1 | Columnhpnicfdot1sMstVID | read-only | current | VLAN Identifier |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.2 | Columnhpnicfdot1sAdminMstID | read-write | current | Administrative Multiple spanning-tree instance Identifier. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.3 | Columnhpnicfdot1sOperMstID | read-only | current | Operative Multiple spanning-tree instance Identifier. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19 | Tablehpnicfdot1sInstanceTable | not-accessible | current | MSTI table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1 | Rowhpnicfdot1sInstanceEntry | not-accessible | current | MSTI table entry. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.1 | Columnhpnicfdot1sInstanceID | read-only | current | Multiple spanning-tree instance Identifier |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.2 | Columnhpnicfdot1sMstiBridgeID | read-only | current | The Bridge Identifier for the spanning tree instance identified by MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.3 | Columnhpnicfdot1sMstiBridgePriority | read-write | current | The Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096 |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.4 | Columnhpnicfdot1sMstiDesignedRoot | read-only | current | The Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.5 | Columnhpnicfdot1sMstiRootPathCost | read-only | current | The path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.6 | Columnhpnicfdot1sMstiRootPort | read-only | current | The Root Port for the spanning tree instance identified by the MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.7 | Columnhpnicfdot1sMstiRootType | read-write | current | Config this Bridge as a primary root or secondary root and or cancel the root for this spanning tree instance identified by MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.8 | Columnhpnicfdot1sMstiRemainingHops | read-only | current | The remaining hops of the spanning tree instance identified by MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.9 | Columnhpnicfdot1sMstiAdminMappedVlanListLow | read-only | current | The lower part of administrative Vlan list mapped to the spanning tree instance identified by MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.10 | Columnhpnicfdot1sMstiAdminMappedVlanListHigh | read-only | current | The higher part of administrative Vlan list mapped to the spanning tree instance identified by MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.11 | Columnhpnicfdot1sMstiOperMappedVlanListLow | read-only | current | The lower part of operative Vlan list mapped to the spanning tree instance identified by MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.12 | Columnhpnicfdot1sMstiOperMappedVlanListHigh | read-only | current | The higher part of operative Vlan list mapped to the spanning tree instance identified by MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20 | Tablehpnicfdot1sPortTable | not-accessible | current | MSTP interface table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1 | Rowhpnicfdot1sPortEntry | not-accessible | current | MSTP interface table entry. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.1 | Columnhpnicfdot1sMstiPortIndex | read-only | current | The index of the Bridge Port |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.2 | Columnhpnicfdot1sMstiState | read-only | current | The current state of the Port (i.e., Disabled, Discarding , Learning, Forwarding) |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.3 | Columnhpnicfdot1sMstiPortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.4 | Columnhpnicfdot1sMstiPathCost | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. The range of path cost is 1..65535 for 802.1d s… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.5 | Columnhpnicfdot1sMstiDesignatedRoot | read-only | current | The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.6 | Columnhpnicfdot1sMstiDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.7 | Columnhpnicfdot1sMstiDesignatedBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.8 | Columnhpnicfdot1sMstiDesignatedPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.9 | Columnhpnicfdot1sMstiMasterBridgeID | read-only | current | The Bridge Identifier of the current Master Bridge. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.10 | Columnhpnicfdot1sMstiMasterPortCost | read-only | current | The CIST path cost from the transmitting Bridge to the Master Bridge. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.11 | Columnhpnicfdot1sMstiStpPortEdgeport | read-write | current | Whether the port fast is enabled. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.12 | Columnhpnicfdot1sMstiStpPortPointToPoint | read-write | current | Whether the port connects the point to point link. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.13 | Columnhpnicfdot1sMstiStpMcheck | read-write | current | Forcing the state machine to send MST BPDUs in this manner can be used to test whether all legacy Bridges on a given LAN have been removed. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.14 | Columnhpnicfdot1sMstiStpTransLimit | read-write | current | The value used by the Port Transmit state machine to limit the maximum transmission rate. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.15 | Columnhpnicfdot1sMstiStpRXStpBPDU | read-only | current | The number of received Config BPDU. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.16 | Columnhpnicfdot1sMstiStpTXStpBPDU | read-only | current | The number of transmitted Config BPDU. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.17 | Columnhpnicfdot1sMstiStpRXTCNBPDU | read-only | current | The number of received TCN BPDU. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.18 | Columnhpnicfdot1sMstiStpTXTCNBPDU | read-only | current | The number of transmitted TCN BPDU. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.19 | Columnhpnicfdot1sMstiStpRXRSTPBPDU | read-only | current | The number of received RST BPDU. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.20 | Columnhpnicfdot1sMstiStpTXRSTPBPDU | read-only | current | The number of transmitted RST BPDU. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.21 | Columnhpnicfdot1sMstiStpRXMSTPBPDU | read-only | current | The number of received MST BPDU. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.22 | Columnhpnicfdot1sMstiStpTXMSTPBPDU | read-only | current | The number of transmitted MST BPDU. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.23 | Columnhpnicfdot1sMstiStpClearStatistics | read-write | current | Clear the spanning tree statistic. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.24 | Columnhpnicfdot1sMstiStpDefaultPortCost | read-write | current | Set default Port path cost. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.25 | Columnhpnicfdot1sMstiStpStatus | read-write | current | Whether the spanning tree protocol is enabled on this port. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.26 | Columnhpnicfdot1sMstiPortRootGuard | read-write | current | Whether the root guard is enabled. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.27 | Columnhpnicfdot1sMstiPortLoopGuard | read-write | current | Whether the loop protection is enabled. Effective in CIST. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.28 | Columnhpnicfdot1sMstiStpPortSendingBPDUType | read-only | current | Type of BPDU which the port is sending. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.29 | Columnhpnicfdot1sMstiStpOperPortPointToPoint | read-only | current | This object indicates whether the port has connected to a point-to-point link or not. The value of the node is an operative value. The administrative value can… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.30 | Columnhpnicfdot1sMstiStpPortAdminBPDUFmt | read-write | current | The value of the node is an administrative value. Value legacy means that the MST BPDU format is forced to legacy. Value dot1s means that the MST BPDU format i… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.31 | Columnhpnicfdot1sMstiStpPortOperBPDUFmt | read-only | current | The format of MST BPDU which the port is sending. Value legacy means that the format of MST BPDU sending on the port is legacy. Value dot1s means that the form… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.32 | Columnhpnicfdot1sMstiStpPortRoleRestriction | read-write | current | Whether the role-restriction is enabled. Effective in CIST. The role-restriction causes the port not to be selected as root port for the CIST or any MSTI. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.33 | Columnhpnicfdot1sMstiStpPortTcRestriction | read-write | current | Whether the tc-restriction is enabled. Effective in CIST. The tc-restriction causes the port not to propagate topology changes to other ports. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.34 | Columnhpnicfdot1sMstiStpPortDisputed | read-only | current | Whether the port is disputed for the CIST or MSTI. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.21 | Scalarhpnicfdot1sStpPathCostStandard | read-write | current | Path cost standard of the bridge. Value dot1d-1998 is IEEE 802.1d standard in 1998, value dot1t is IEEE 802.1t standard, and value legacy is a private legacy s… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatus | INTEGER { enabled(1), disabled(2) } BridgeId ::= OCTET STRING (SIZE (8)) | current | A simple status value for the object. |
| Hpnicfdot1sFormatStatus | INTEGER { legacy(1), dot1s(2), auto(3) } | current | Legacy means that the BPDU format is legacy. Dot1s means that the BPDU format is IEEE 802.1s. Auto means that the format of BPDU sending on the port is determined by the BPDU format of its connective port. |