HPN-ICF-LswRSTP-MIB
41 objects
No module-level DESCRIPTION found.
Imported Objects
| BRIDGE-MIB | dot1dStpPort dot1dStpPortEntry |
| HPN-ICF-OID-MIB | hpnicflswCommon |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6 | IdentityhpnicfLswRstpMib | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1 | NodehpnicfLswRstpMibObject | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0 | IdentityhpnicfRstpEventsV2 | current | Definition point for RSTP notifications. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.1 | NotificationhpnicfRstpBpduGuarded | current | The SNMP trap that is generated when an edged port of the BPDU-guard switch recevies BPDU packets. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.2 | NotificationhpnicfRstpRootGuarded | current | The SNMP trap that is generated when a root-guard port receives a superior bpdu. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.3 | NotificationhpnicfRstpBridgeLostRootPrimary | current | The SNMP trap that is generated when the bridge is no longer the root bridge of the spanning tree. Another switch with higher priority has already been the roo… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.4 | NotificationhpnicfRstpLoopGuarded | current | The SNMP trap that is generated when a loop-guard port is aged out . | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.1 | Scalarhpnicfdot1dStpStatus | read-write | current | Bridge STP enabled/disabled state |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.2 | Scalarhpnicfdot1dStpForceVersion | read-write | current | Running mode of the bridge RSTP state machine |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.3 | Scalarhpnicfdot1dStpDiameter | read-write | current | Permitted amount of bridges between any two ends on the network. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.4 | Scalarhpnicfdot1dStpRootBridgeAddress | read-only | current | MAC address of the root bridge |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5 | Tablehpnicfdot1dStpPortXTable | not-accessible | current | RSTP extended information of the port |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1 | Rowhpnicfdot1dStpPortXEntry | not-accessible | current | RSTP extended information of the port |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.1 | Columnhpnicfdot1dStpPortStatus | read-write | current | RSTP status of the port |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.2 | Columnhpnicfdot1dStpPortEdgeport | read-write | current | Whether the port can be an edge port |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.3 | Columnhpnicfdot1dStpPortPointToPoint | read-write | current | It is the administrative value indicates whether the port can be connected to a point-to-point link or not. If the value is 'auto', the operative value of a po… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.4 | Columnhpnicfdot1dStpMcheck | read-write | current | Check if the port transfer state machine enters |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.5 | Columnhpnicfdot1dStpTransLimit | read-write | current | Packet transmission limit of the bridge in a duration of Hello Time. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.6 | Columnhpnicfdot1dStpRXStpBPDU | read-only | current | Number of STP BPDU received |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.7 | Columnhpnicfdot1dStpTXStpBPDU | read-only | current | Number of STP BPDU transmitted |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.8 | Columnhpnicfdot1dStpRXTCNBPDU | read-only | current | Number of TCN BPDU received |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.9 | Columnhpnicfdot1dStpTXTCNBPDU | read-only | current | Number of TCN BPDU transmitted |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.10 | Columnhpnicfdot1dStpRXRSTPBPDU | read-only | current | Number of RSTP BPDU received |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.11 | Columnhpnicfdot1dStpTXRSTPBPDU | read-only | current | Number of RSTP BPDU transmitted |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.12 | Columnhpnicfdot1dStpClearStatistics | read-write | current | Clear RSTP statistics. Read operation not supported. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.13 | Columnhpnicfdot1dSetStpDefaultPortCost | read-write | current | Set PathCost back to the default setting. Read operation not supported. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.14 | Columnhpnicfdot1dStpRootGuard | read-write | current | If the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.15 | Columnhpnicfdot1dStpLoopGuard | read-write | current | Loop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.16 | Columnhpnicfdot1dStpPortBlockedReason | read-only | current | Record the block reason of the port. notBlock (1) means that the port is not in block state,. blockForProtocol (2) means that the port is blocked by stp protoc… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.17 | Columnhpnicfdot1dStpRXTCBPDU | read-only | current | The number of received TC BPDUs |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.18 | Columnhpnicfdot1dStpPortSendingBPDUType | read-only | current | Type of BPDU which the port is sending. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.19 | Columnhpnicfdot1dStpOperPortPointToPoint | read-only | current | This object indicates whether the port has connected to a point-to-point link or not. The administrative value should be read from hpnicfdot1dStpPortPointToPoi… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.6 | ScalarhpnicfDot1dStpBpduGuard | read-write | current | If BPDU guard enabled. The edge port will discard illegal BPDU when enabled |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.7 | ScalarhpnicfDot1dStpRootType | read-write | current | Root type of the bridge |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.8 | ScalarhpnicfDot1dTimeOutFactor | read-write | current | Time Out Factor of the bridge. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.9 | ScalarhpnicfDot1dStpPathCostStandard | read-write | current | Path Cost Standard of the bridge. Value 'dot1d-1998' is IEEE 802.1d standard in 1998, value 'dot1t' is IEEE 802.1t standard, and value 'legacy' is a private le… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10 | Tablehpnicfdot1dStpIgnoredVlanTable | not-accessible | current | RSTP extended information of vlan |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1 | Rowhpnicfdot1dStpIgnoredVlanEntry | not-accessible | current | RSTP extended information of the vlan |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1.1 | Columnhpnicfdot1dVlan | read-only | current | Vlan id supported |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1.2 | Columnhpnicfdot1dStpIgnore | read-write | current | Whether the vlan is stp Ignored |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |