HPN-ICF-LswVLAN-MIB
78 objects
No module-level DESCRIPTION found.
Imported Objects
| HPN-ICF-LswINF-MIB | hpnicfifVLANTrunkStatusEntry PortList |
| HPN-ICF-OID-MIB | hpnicflswCommon |
| RFC1213-MIB | ifEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2 | IdentityhpnicfLswVlan | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1 | IdentityhpnicfLswVlanMngObject | current | Description. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1 | Tablehpnicfdot1qVlanMIBTable | not-accessible | current | VLAN MIB table |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1 | Rowhpnicfdot1qVlanMIBEntry | not-accessible | current | Entries of VLAN MIB table |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.1 | Columnhpnicfdot1qVlanIndex | read-only | current | The VLAN-ID. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.2 | Columnhpnicfdot1qVlanName | read-write | current | Name of the VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.3 | Columnhpnicfdot1qVlanPorts | read-write | current | Port list of the VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.4 | Columnhpnicfdot1qVlanType | read-write | current | Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3). |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.5 | Columnhpnicfdot1qVlanMacFilter | read-only | current | Whether to filter MAC addresses. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.6 | Columnhpnicfdot1qVlanMcastUnknownProtos | read-only | current | Whether to broadcast the unknown packets. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.7 | ColumnhpnicfExistInterface | read-only | current | Whether there is virtual interface. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.8 | ColumnhpnicfVlanInterfaceIndex | read-only | current | Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is vlan id, else the value is 0. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.9 | Columnhpnicfdot1qVlanMacLearn | read-only | current | MAC address learning identity. (common vlan/Sub-vlan) |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.10 | Columnhpnicfdot1qVlanStatus | read-only | current | Status of the VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.11 | Columnhpnicfdot1qVlanCreationTime | read-only | current | The sysUPTime when the VLAN is created. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.12 | Columnhpnicfdot1qVlanPriority | read-write | current | Priority of the VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.13 | Columnhpnicfdot1qVlanRowStatus | read-create | current | Operation status. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.14 | Columnhpnicfdot1qVlanBroadcastSuppression | read-write | current | Whether broadcast suppression of vlan be supported pro rata. The vlaue of 100 indicates no broadcast suppression. If the function is not supported, this object… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.15 | Columnhpnicfdot1qVlanBcastSuppressionPPS | read-write | current | If the broadcast can be controlled with pps(packet per second)type, the value of 0 indicates no suppression. This node is conflicted with hpnicfdot1qVlanBroadc… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.16 | Columnhpnicfdot1qVlanMulticast | read-write | current | Multicast vlan. The default value is disable(0). |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.17 | Columnhpnicfdot1qVlanTaggedPorts | read-only | current | Tagged port list of the VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.18 | Columnhpnicfdot1qVlanUntaggedPorts | read-only | current | Untagged port list of the VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.19 | Columnhpnicfdot1qVlanPortIndexs | read-write | current | PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2 | TablehpnicfVlanInterfaceTable | not-accessible | current | Virtual interface configuration table |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1 | RowhpnicfVlanInterfaceEntry | not-accessible | current | Entries of virtual interface configuration table |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.1 | ColumnhpnicfVlanInterfaceID | read-only | current | Index of the vlan interface table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.2 | Columnhpnicfdot1qVlanID | read-only | current | VLAN-ID |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.3 | Columnhpnicfdot1qVlanIpAddress | read-write | current | IP address of interface. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.4 | Columnhpnicfdot1qVlanIpAddressMask | read-write | current | IP address mask of interface. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.5 | ColumnhpnicfVlanInterfaceAdminStatus | read-write | current | Status of VLAN virtual interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.6 | ColumnhpnicfVlanInterfaceFrameType | read-only | current | Frame type accepted by VLAN virtual interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.7 | ColumnhpnicfInterfaceRowStatus | read-create | current | Operation status. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.8 | ColumnhpnicfVlanInterfaceIpMethod | read-write | current | Vlan interface ip address acquiring method which is manual, dhcp or bootp. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.9 | ColumnhpnicfVlanInterfaceIfIndex | read-only | current | IfIndex of VLAN interface. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4 | TablehpnicfifIsolateMappingTable | not-accessible | current | Secondary vlan lists of Isolate-VLANs. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1 | RowhpnicfifIsolateMappingEntry | not-accessible | current | Secondary vlan lists of Isolate-VLANs. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.1 | ColumnhpnicfifIsolatePrimaryVlanID | read-only | current | Primary VLAN-ID. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.2 | ColumnhpnicfifIsolateSecondaryVlanlistLow | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16,… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.3 | ColumnhpnicfifIsolateSecondaryVlanlistHigh | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 th… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5 | TablehpnicfVlanInterfaceAddrTable | not-accessible | current | VLAN interface IP address configuration table |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1 | RowhpnicfVlanInterfaceAddrEntry | not-accessible | current | Entries of VLAN interface IP address configuration table |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.1 | ColumnhpnicfVlanInterfaceIpIfIndex | read-only | current | Index of VLAN interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.2 | ColumnhpnicfVlanInterfaceIpAddr | read-only | current | IP address of VLAN interface. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.3 | ColumnhpnicfVlanInterfaceIpMask | read-create | current | IP address mask of VLAN interface. When destory single IP address, you must set it correct to relative IP address. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.4 | ColumnhpnicfVlanInterfaceIpType | read-create | current | IP address type. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.5 | ColumnhpnicfVlanInterfaceIpRowStatus | read-create | current | Operation status. active(1) will only be set when taking GET or GET NEXT operation. createAndGo(4) and destory(6) is valid when taking SET operation. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6 | TablehpnicfDot1qVlanBatchMIBTable | not-accessible | current | VLAN batch configuration table. In the case of VLAN batch creation, hpnicfdot1qVlanBatchSetOperate should be set to 1. For example, if creating a row is for cr… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1 | RowhpnicfDot1qVlanBatchMIBEntry | not-accessible | current | VLAN batch configuration entry. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.1 | Columnhpnicfdot1qVlanBatchOperIndex | read-only | current | The consequence of operation. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.2 | Columnhpnicfdot1qVlanBatchStartIndex | read-write | current | The value of start VLAN-ID. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.3 | Columnhpnicfdot1qVlanBatchEndIndex | read-write | current | The value of end VLAN-ID. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.4 | Columnhpnicfdot1qVlanBatchOperStatus | read-only | current | The status of operation. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.5 | Columnhpnicfdot1qVlanBatchRowStatus | read-create | current | The row status of HpnicfDot1qVlanBatchMIBEntry. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.6 | Columnhpnicfdot1qVlanBatchSetOperate | read-create | current | VLAN batch creation or deletion. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7 | TablehpnicfifSuperVlanMappingTable | not-accessible | current | Sub VLAN lists of super-VLANs. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1 | RowhpnicfifSuperVlanMappingEntry | not-accessible | current | Sub VLAN lists of super-VLANs. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.1 | ColumnhpnicfifSuperVlanID | read-only | current | Super VLAN ID. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.2 | ColumnhpnicfifSubVlanlistLow | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16,… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.3 | ColumnhpnicfifSubVlanlistHigh | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 th… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8 | TablehpnicfPrivateVlanMappingTable | not-accessible | current | Secondary vlan lists of Primary-VLANs. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1 | RowhpnicfPrivateVlanMappingEntry | not-accessible | current | Secondary vlan lists of Primary-VLANs. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.1 | ColumnhpnicfPrimaryVlanID | read-only | current | Primary VLAN-ID. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.2 | ColumnhpnicfSecondaryVlanlistLow | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16,… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.3 | ColumnhpnicfSecondaryVlanlistHigh | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 th… |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2 | IdentityhpnicfLswVlanProtoObject | current | Description. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.14 | ScalarhpnicfVLANMibGarpLeaveAllTime | read-write | current | The GARP LeaveAll time, in centiseconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15 | TablehpnicfvLANMibSwitchCountTable | not-accessible | current | A table containing the information various statistics of switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1 | RowhpnicfvLANMibSwitchCountEntry | not-accessible | current | A table containing the information various statistics of switch. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.1 | ColumnhpnicfVLANMibSwitchGMRPRXPkt | read-only | current | Number of GMRP frames received. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.2 | ColumnhpnicfVLANMibSwitchGVRPRXPkt | read-only | current | Number of GVRP frames received. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.3 | ColumnhpnicfVLANMibSwitchGMRPTXPkt | read-only | current | Number of GMRP frames transmitted. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.4 | ColumnhpnicfVLANMibSwitchGVRPTXPkt | read-only | current | Number of GVRP frames transmitted. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.5 | ColumnhpnicfVLANMibSwitchDiscardedPkt | read-only | current | Number of discarded frames. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.6 | ColumnhpnicfVLANMibSwitchGarpStatClear | read-write | current | Clear various Statistics viz. read operation not supported. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16 | TablehpnicfvLANMibHoldTimeTable | not-accessible | current | A table for setting/getting the Hold Time for a particular port. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16.1 | RowhpnicfvLANMibHoldTimeEntry | not-accessible | current | A table for setting/getting the HoldTime of the port. |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16.1.1 | ColumnhpnicfVLANMibHoldTime | read-write | current | HoldTime of the port. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HpnicfVlanIndex | Integer32(0..2147483647) hpnicfLswVlanMngObject OBJECT-IDENTITY STATUS current DESCRIPTION "Description." ::= { hpnicfLswVlan 1 } | current | A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see Vlan… |