HPN-ICF-MPLS-LSR-MIB
119 objects
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft <draft-ietf-mpls-arch-06.txt>, August 1999.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfMpls |
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddressIPv4 InetAddressIPv6 InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1 | IdentityhpnicfMplsLsr | This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Mult… | ||
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1 | NodehpnicfmplsLsrObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1 | TablehpnicfmplsInterfaceConfTable | not-accessible | current | This table specifies per-interface MPLS capability and associated information. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1 | RowhpnicfmplsInterfaceConfEntry | not-accessible | current | An entry in this table is created by an LSR for every interface capable of supporting MPLS. The entry with index 0 represents the per-platform label space and … |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.1 | ColumnhpnicfmplsInterfaceConfIndex | not-accessible | current | This is a unique index for an entry in the hpnicfmplsInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface en… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.2 | ColumnhpnicfmplsInterfaceLabelMinIn | read-only | current | This is the minimum value of an MPLS label that this LSR is willing to receive on this interface. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.3 | ColumnhpnicfmplsInterfaceLabelMaxIn | read-only | current | This is the maximum value of an MPLS label that this LSR is willing to receive on this interface. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.4 | ColumnhpnicfmplsInterfaceLabelMinOut | read-only | current | This is the minimum value of an MPLS label that this LSR is willing to send on this interface. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.5 | ColumnhpnicfmplsInterfaceLabelMaxOut | read-only | current | This is the maximum value of an MPLS label that this LSR is willing to send on this interface. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.6 | ColumnhpnicfmplsInterfaceTotalBandwidth | read-only | current | This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable whe… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.7 | ColumnhpnicfmplsInterfaceAvailableBandwidth | read-only | current | This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculat… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.8 | ColumnhpnicfmplsInterfaceLabelParticipationType | read-only | current | Either the perPlatform(0) or perInterface(1) bit MUST be set. If the value of the hpnicfmplsInterfaceConfIndex for this entry is zero, then only the perPlatfor… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.9 | ColumnhpnicfmplsInterfaceConfStorageType | read-create | current | The storage type for this entry. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2 | TablehpnicfmplsInterfacePerfTable | not-accessible | current | This table provides MPLS performance information on a per-interface basis. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1 | RowhpnicfmplsInterfacePerfEntry | not-accessible | current | An entry in this table is created by the LSR for every interface capable of supporting MPLS. Its is an extension to the hpnicfmplsInterfaceConfEntry table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.1 | ColumnhpnicfmplsInterfaceInLabelsUsed | read-only | current | This object counts the number of labels that are in use at this point in time on this interface in the incoming direction. If the interface participates in the… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.2 | ColumnhpnicfmplsInterfaceFailedLabelLookup | read-only | current | This object counts the number of labeled packets that have been received on this interface and were discarded because there was no matching cross-connect entry… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.3 | ColumnhpnicfmplsInterfaceOutLabelsUsed | read-only | current | This object counts the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. This object MUST count o… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.4 | ColumnhpnicfmplsInterfaceOutFragments | read-only | current | This object counts the number of outgoing MPLS packets that required fragmentation before transmission on this interface. This object transmission on this inte… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3 | TablehpnicfmplsInSegmentTable | not-accessible | current | This table contains a collection of incoming segments to an LSR. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1 | RowhpnicfmplsInSegmentEntry | not-accessible | current | An entry in this table represents one incoming segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.1 | ColumnhpnicfmplsInSegmentIfIndex | accessible-for-notify | current | This is a unique index for an entry in the hpnicfmplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.2 | ColumnhpnicfmplsInSegmentLabel | accessible-for-notify | current | The incoming label for this segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.3 | ColumnhpnicfmplsInSegmentNPop | read-create | current | The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packe… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.4 | ColumnhpnicfmplsInSegmentAddrFamily | read-create | current | The IANA address family [IANAFamily] of the incoming packet. A value of other(0) indicates that the family type is either unknown or undefined. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.5 | ColumnhpnicfmplsInSegmentXCIndex | read-only | current | Index into hpnicfmplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to … |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.6 | ColumnhpnicfmplsInSegmentOwner | read-create | current | Denotes the entity that created and is responsible for managing this segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.7 | ColumnhpnicfmplsInSegmentTrafficParamPtr | read-create | current | This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the hpnicfmplsTrafficParamTa… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.8 | ColumnhpnicfmplsInSegmentRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.9 | ColumnhpnicfmplsInSegmentStorageType | read-create | current | This variable indicates the storage type for this object. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4 | TablehpnicfmplsInSegmentPerfTable | not-accessible | current | This table contains statistical information for incoming MPLS segments to an LSR. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1 | RowhpnicfmplsInSegmentPerfEntry | not-accessible | current | An entry in this table contains statistical information about one incoming segment which was configured in the hpnicfmplsInSegmentTable. The counters in this e… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.1 | ColumnhpnicfmplsInSegmentOctets | read-only | current | This value represents the total number of octets received by this segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.2 | ColumnhpnicfmplsInSegmentPackets | read-only | current | Total number of packets received by this segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.3 | ColumnhpnicfmplsInSegmentErrors | read-only | current | The number of errored packets received on this segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.4 | ColumnhpnicfmplsInSegmentDiscards | read-only | current | The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being tr… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.5 | ColumnhpnicfmplsInSegmentHCOctets | read-only | current | The total number of octets received. This is the 64 bit version of hpnicfmplsInSegmentOctets. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.6 | ColumnhpnicfmplsInSegmentPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such disco… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.5 | ScalarhpnicfmplsOutSegmentIndexNext | read-only | current | This object contains the next appropriate value to be used for hpnicfmplsOutSegmentIndex when creating entries in the hpnicfmplsOutSegmentTable. If the number … |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6 | TablehpnicfmplsOutSegmentTable | not-accessible | current | This table contains a representation of the outgoing segments from an LSR. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1 | RowhpnicfmplsOutSegmentEntry | not-accessible | current | An entry in this table represents one outgoing segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.1 | ColumnhpnicfmplsOutSegmentIndex | accessible-for-notify | current | This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index hpnicfmp… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.2 | ColumnhpnicfmplsOutSegmentIfIndex | read-create | current | This value contains the interface index of the outgoing interface. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.3 | ColumnhpnicfmplsOutSegmentPushTopLabel | read-create | current | This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable must be set to true if the … |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.4 | ColumnhpnicfmplsOutSegmentTopLabel | read-create | current | If hpnicfmplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.5 | ColumnhpnicfmplsOutSegmentNextHopIpAddrType | read-create | current | Indicates whether the next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.6 | ColumnhpnicfmplsOutSegmentNextHopIpv4Addr | read-create | current | IPv4 Address of the next hop. Its value is significant only when hpnicfmplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it should return a value of 0. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.7 | ColumnhpnicfmplsOutSegmentNextHopIpv6Addr | read-create | current | IPv6 address of the next hop. Its value is significant only when hpnicfmplsOutSegmentNextHopIpAddrType is ipV6 (2), otherwise it should return a value of 0. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.8 | ColumnhpnicfmplsOutSegmentXCIndex | read-only | current | Index into hpnicfmplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to … |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.9 | ColumnhpnicfmplsOutSegmentOwner | read-create | current | Denotes the entity which created and is responsible for managing this segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.10 | ColumnhpnicfmplsOutSegmentTrafficParamPtr | read-create | current | This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the hpnicfmplsTrafficParamT… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.11 | ColumnhpnicfmplsOutSegmentRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.12 | ColumnhpnicfmplsOutSegmentStorageType | read-create | current | This variable indicates the storage type for this object. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7 | TablehpnicfmplsOutSegmentPerfTable | not-accessible | current | This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the in… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1 | RowhpnicfmplsOutSegmentPerfEntry | not-accessible | current | An entry in this table contains statistical information about one outgoing segment configured in hpnicfmplsOutSegmentTable. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.1 | ColumnhpnicfmplsOutSegmentOctets | read-only | current | This value contains the total number of octets sent on this segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.2 | ColumnhpnicfmplsOutSegmentPackets | read-only | current | This value contains the total number of packets sent on this segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.3 | ColumnhpnicfmplsOutSegmentErrors | read-only | current | Number of packets that could not be sent due to errors on this segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.4 | ColumnhpnicfmplsOutSegmentDiscards | read-only | current | The number of labeled packets received on this out- segment, which were chosen to be discarded even though no errors had been detected to prevent their being t… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.5 | ColumnhpnicfmplsOutSegmentHCOctets | read-only | current | Total number of octets sent. This is the 64 bit version of hpnicfmplsOutSegmentOctets. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.6 | ColumnhpnicfmplsOutSegmentPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such disco… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.8 | ScalarhpnicfmplsXCIndexNext | read-only | current | This object contains an appropriate value to be used for hpnicfmplsXCIndex when creating entries in the hpnicfmplsXCTable. The value 0 indicates that no unassi… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9 | TablehpnicfmplsXCTable | not-accessible | current | This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. hpnic… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1 | RowhpnicfmplsXCEntry | not-accessible | current | A row in this table represents one cross-connect entry. The following objects index it: - cross-connect index hpnicfmplsXCIndex that uniquely identifies a grou… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.1 | ColumnhpnicfmplsXCIndex | accessible-for-notify | current | Primary index for the conceptual row identifying a group of cross-connect segments. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.2 | ColumnhpnicfmplsXCLspId | read-create | current | This value identifies the label switched path that this cross-connect entry belongs to. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.3 | ColumnhpnicfmplsXCLabelStackIndex | read-create | current | Primary index into hpnicfmplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- s… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.4 | ColumnhpnicfmplsXCIsPersistent | read-create | current | Denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to … |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.5 | ColumnhpnicfmplsXCOwner | read-create | current | Denotes the entity that created and is responsible for managing this cross-connect. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.6 | ColumnhpnicfmplsXCRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.7 | ColumnhpnicfmplsXCStorageType | read-create | current | Defines the storage type for this object. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.8 | ColumnhpnicfmplsXCAdminStatus | read-create | current | The desired operational status of this segment. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.9 | ColumnhpnicfmplsXCOperStatus | read-only | current | The actual operational status of this cross- connect. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.10 | ScalarhpnicfmplsMaxLabelStackDepth | read-only | current | The maximum stack depth supported by this LSR. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.11 | ScalarhpnicfmplsLabelStackIndexNext | read-only | current | This object contains an appropriate value to be used for hpnicfmplsLabelStackIndex when creating entries in the hpnicfmplsLabelStackTable. The value 0 indicate… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12 | TablehpnicfmplsLabelStackTable | not-accessible | current | This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from hpnicfmplsXCTable. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1 | RowhpnicfmplsLabelStackEntry | not-accessible | current | An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administ… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.1 | ColumnhpnicfmplsLabelStackIndex | not-accessible | current | Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.2 | ColumnhpnicfmplsLabelStackLabelIndex | not-accessible | current | Secondary index for this row identifying one label of the stack. Note that an entry with a smaller hpnicfmplsLabelStackLabelIndex would refer to a label higher… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.3 | ColumnhpnicfmplsLabelStackLabel | read-create | current | The label to pushed. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.4 | ColumnhpnicfmplsLabelStackRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.5 | ColumnhpnicfmplsLabelStackStorageType | read-create | current | Defines the storage type for this object. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.13 | ScalarhpnicfmplsTrafficParamIndexNext | read-only | current | This object contains an appropriate value which will be used for hpnicfmplsTrafficParamIndex when creating entries in the hpnicfmplsTrafficParamTable. The valu… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14 | TablehpnicfmplsTrafficParamTable | not-accessible | current | This table specifies the Traffic Parameter objects for in and out-segments. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1 | RowhpnicfmplsTrafficParamEntry | not-accessible | current | An entry in this table represents the TrafficParam objects for one or more in or out segments. A single entry can be pointed to by multiple segments indicating… |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.1 | ColumnhpnicfmplsTrafficParamIndex | not-accessible | current | Uniquely identifies this row of the table. Note that zero represents an invalid index. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.2 | ColumnhpnicfmplsTrafficParamMaxRate | read-create | current | Maximum rate in kilobits/second. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.3 | ColumnhpnicfmplsTrafficParamMeanRate | read-create | current | Mean rate in kilobits/second. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.4 | ColumnhpnicfmplsTrafficParamMaxBurstSize | read-create | current | Maximum burst size in bytes. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.5 | ColumnhpnicfmplsTrafficParamRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.6 | ColumnhpnicfmplsTrafficParamStorageType | read-create | current | The storage type for this object. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.15 | ScalarhpnicfmplsXCTrapEnable | read-write | current | If this object is true, then it enables the generation of hpnicfmplsXCUp and hpnicfmplsXCDown traps, otherwise these traps are not emitted. |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.2 | NodehpnicfmplsLsrNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.2.0 | NodehpnicfmplsLsrNotifyPrefix | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.2.0.1 | NotificationhpnicfmplsXCUp | current | This notification is generated when a hpnicfmplsXCOperStatus object for one of the configured cross-connect entries is about to leave the down state and transi… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.2.0.2 | NotificationhpnicfmplsXCDown | current | This notification is generated when a hpnicfmplsXCOperStatus object for one of the configured cross-connect entries is about to enter the down state from some … | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3 | NodehpnicfmplsLsrConformance | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1 | NodehpnicfmplsLsrGroups | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.1 | GrouphpnicfmplsInterfaceGroup | current | Collection of objects needed for MPLS interface configuration and performance information. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.2 | GrouphpnicfmplsInSegmentGroup | current | Collection of objects needed to implement an in- segment. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.3 | GrouphpnicfmplsOutSegmentGroup | current | Collection of objects needed to implement an out- segment. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.4 | GrouphpnicfmplsXCGroup | current | Collection of objects needed to implement a cross-connect entry. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.5 | GrouphpnicfmplsXCOptionalGroup | current | Collection of optional objects for implementing a cross-connect entry. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.6 | GrouphpnicfmplsPerfGroup | current | Collection of objects providing performance information about an LSR. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.7 | GrouphpnicfmplsHCInSegmentPerfGroup | current | Object(s) providing performance information specific to out-segments for which the object hpnicfmplsInterfaceInOctets wraps around too quickly. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.8 | GrouphpnicfmplsHCOutSegmentPerfGroup | current | Object(s) providing performance information specific to out-segments for which the object hpnicfmplsInterfaceOutOctets wraps around too quickly. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.9 | GrouphpnicfmplsTrafficParamGroup | current | Object(s) required for supporting QoS resource reservation. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.10 | GrouphpnicfmplsXCIsPersistentGroup | current | Objects needed to support persistent cross- connects. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.11 | GrouphpnicfmplsXCIsNotPersistentGroup | current | Objects needed to support non-persistent cross- connects. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.12 | GrouphpnicfmplsLabelStackGroup | current | Objects needed to support label stacking. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.13 | GrouphpnicfmplsSegmentDiscontinuityGroup | current | A collection of objects providing information specific to segment discontinuities.. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.14 | GrouphpnicfmplsLsrNotificationGroup | current | Set of notifications implemented in this module. None is mandatory. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.2 | NodehpnicfmplsLsrCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.2.1 | CompliancehpnicfmplsLsrModuleCompliance | read-only | current | Compliance statement for agents that support the MPLS LSR MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HpnicfMplsBitRate | Integer32 (1..2147483647) | current | An estimate of bandwidth in units of 1,000 bits per second. If this object reports a value of 'n' then the rate of the object is somewhere in the range of 'n-500' to 'n+499'. For objects which do not vary in bitrate, or… |
| HpnicfMplsBurstSize | Integer32 (1..2147483647) | current | The number of octets of MPLS data that the stream may send back-to-back without concern for policing. |
| HpnicfMplsLabel | Unsigned32 (0..4294967295) | current | This value represents an MPLS label. Note that the contents of a label field are interpreted in an interface-type specific fashion. For example, the 20-bit wide label carried in the MPLS shim header is contained in bits… |
| HpnicfMplsLSPID | OCTET STRING (SIZE (0..31)) | current | An identifier that is assigned to each LSP and is used to uniquely identify it. This is assigned at the head end of the LSP and can be used by all LSRs to identify this LSP. This value is piggybacked by the signaling pr… |
| HpnicfMplsObjectOwner | INTEGER { other(1), snmp(2), ldp(3), rsvp(4), crldp(5), policyAgent(6), unknown (7) } | current | The entity which owns the object in question. |