HPN-ICF-MPLSOAM-PS-MIB
23 objects
This MIB contains objects to configure mpls protect-switch module.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfCommon |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.80 | IdentityhpnicfMplsOamPs | This MIB contains objects to configure mpls protect-switch module. | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.80.1 | NodehpnicfMplsOamPsScalarGroup | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.80.1.1 | ScalarhpnicfMplsOamPsTrapOpen | read-write | current | Whether mpls protect-switch trap is globally enabled. false: disable; true: enable |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2 | NodehpnicfMplsOamPsTable | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1 | TablehpnicfMplsPsTable | not-accessible | current | This table specifies per-protection-group MPLS PS capability and associated information. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1 | RowhpnicfMplsPsEntry | not-accessible | current | An entry in this table is created by an LSR for every protection group capable of supporting mpls ps. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.1 | ColumnhpnicfMplsPsIndex | not-accessible | current | This is a unique index for an entry in the mplspsEntry. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.2 | ColumnhpnicfMplsPsGroupID | read-create | current | This is a unique group id for an entry in the mplspsEntry. One protect-switch group is composed of one working static-lsp and one protection static-lsp. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.3 | ColumnhpnicfMplsPsWorkLspName | read-create | current | The name of the working static-lsp. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.4 | ColumnhpnicfMplsPsProtectLspName | read-create | current | The name of the protection static-lsp. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.5 | ColumnhpnicfMplsPsRevertiveMode | read-create | current | Revertive mode is a protection switching mode where revertive action (switch back to the working LSP) is taken after the working LSP is repaired. And switching… |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.6 | ColumnhpnicfMplsPsWTR | read-create | current | Wait to Restore timer is only applicable for the revertive mode and applies to a working LSP, it prevents reversion back to select the working LSP until the Wa… |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.7 | ColumnhpnicfMplsPsHoldOff | read-create | current | The time between declaration of signal degrade or signal fail, and the initialization of the protection switching algorithm. Step is 100ms, maximum is 10s. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.8 | ColumnhpnicfMplsPsSwitchCondition | read-create | current | The current switch condition of the protection group. 1: clear, this command clears all of the externally initiated switch commands listed below; 2: lockout of… |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.9 | ColumnhpnicfMplsPsWorkLspDetectState | read-only | current | The state of working static-lsp state in one protection group, whether it is in defect: 1: it is out of defect; 2: it enters defect. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.10 | ColumnhpnicfMplsPsWorkLspUpDownState | read-only | current | The state of working static-lsp state in one protection group, whether it is up or down: 1: it is in up state; 2: it is in down state. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.11 | ColumnhpnicfMplsPsProtLspDetectState | read-only | current | The state of protection static-lsp state in one protection group, whether it is in detection: 1: it is out of defect; 2: it enters defect. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.12 | ColumnhpnicfMplsPsProtLspUpDownState | read-only | current | The state of protection static-lsp state in one protection group, whether it is up or down: 1: it is in up state; 2: it is in down state. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.13 | ColumnhpnicfMplsPsSwitchResult | read-only | current | Which tunnel is used to transfer the data stream. 1: working static-lsp; 2: protection static-lsp. |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.14 | ColumnhpnicfMplsPsRowStatus | read-create | current | This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To crea… |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.3 | NodehpnicfMplsOamPsNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.80.3.1 | NotificationhpnicfMplsPsSwitchPtoW | current | This notification is generated when switching from protection-lsp to working-lsp occured. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.80.3.2 | NotificationhpnicfMplsPsSwitchWtoP | current | This notification is generated when switching from woking-lsp to protection-lsp occured. |