HPN-ICF-NQA-MIB
203 objects
The private MIB file includes the test information of the device. It is supplementary for rfc2925.txt.
Imported Objects
| DISMAN-PING-MIB | pingCtlDescr pingCtlEntry pingCtlOwnerIndex pingCtlTargetAddress pingCtlTargetAddressType pingCtlTestName pingCtlType |
| HPN-ICF-OID-MIB | hpnicfRhw |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.3 | IdentityhpnicfNqa | The private MIB file includes the test information of the device. It is supplementary for rfc2925.txt. | ||
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1 | NodehpnicfNqaObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.1 | ScalarhpnicfNqaMIBVersion | read-only | current | Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB' |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2 | TablehpnicfNqaCtlTable | not-accessible | current | Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1 | RowhpnicfNqaCtlEntry | not-accessible | current | Defines an entry in the hpnicfNqaCtlTable. The operation of this table is same as that of pingResultsTable. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.1 | ColumnhpnicfNqaCtlTargetPort | read-create | current | The destination port that may be used by udpEcho, tcpConnect and jitter probes. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.2 | ColumnhpnicfNqaCtlSourcePort | read-create | current | The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.3 | ColumnhpnicfNqaCtlTTL | read-create | current | Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.4 | ColumnhpnicfNqaCtlJitterAdminInterval | read-create | current | Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.5 | ColumnhpnicfNqaCtlJitterAdminNumPackets | read-create | current | Packet number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.6 | ColumnhpnicfNqaCtlHttpOperationType | read-create | current | Http operation type: get, post or raw. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.7 | ColumnhpnicfNqaCtlHttpOperationString | read-create | current | Http operation string. For example, if the http operation type is get, the string will be url, home page and http version. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.8 | ColumnhpnicfNqaCtlFtpOperationType | read-create | current | Ftp operation type. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.9 | ColumnhpnicfNqaCtlFtpUsername | read-create | current | Ftp username. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.10 | ColumnhpnicfNqaCtlFtpPassword | read-create | current | Ftp password. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.11 | ColumnhpnicfNqaCtlFtpOperationString | read-create | current | Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.12 | ColumnhpnicfNqaCtlVPNInstance | read-create | current | VPN name by which system finds route in the specified VPN to send NQA probe packets. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.13 | ColumnhpnicfNqaCtlHistoryKeptTime | read-create | current | To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.14 | ColumnhpnicfNqaCtlHistoryEnable | read-create | current | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.15 | ColumnhpnicfNqaCtlICPIFAdvFactor | read-create | current | The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.16 | ColumnhpnicfNqaCtlCodecType | read-create | current | To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3 | TablehpnicfNqaResultsTable | not-accessible | current | Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in … |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1 | RowhpnicfNqaResultsEntry | not-accessible | current | The operation of this table is same as that of pingResultsTable. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.1 | ColumnhpnicfNqaResultsRttNumDisconnects | read-only | current | The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.2 | ColumnhpnicfNqaResultsRttTimeouts | read-only | current | The number of times that a NQA probe failed because the probe timed out. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.3 | ColumnhpnicfNqaResultsRttBusies | read-only | current | The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. Th… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.4 | ColumnhpnicfNqaResultsRttNoConnections | read-only | current | The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.5 | ColumnhpnicfNqaResultsRttDrops | read-only | current | The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.6 | ColumnhpnicfNqaResultsRttSequenceErrors | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.7 | ColumnhpnicfNqaResultsRttStatsErrors | read-only | current | The number of some other errors. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.8 | ColumnhpnicfNqaResultsMaxDelaySD | read-only | current | The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In … |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.9 | ColumnhpnicfNqaResultsMaxDelayDS | read-only | current | The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitte… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.10 | ColumnhpnicfNqaResultsLostPacketRatio | read-only | current | The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.11 | ColumnhpnicfNqaResultsPacketLateArrival | read-only | current | The value of this object indicates the number of the packets that arrived after the timeout. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.12 | ColumnhpnicfNqaResultsRttSum | read-only | current | The sum of round trip time. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.13 | ColumnhpnicfNqaResultsNumOfDelaySD | read-only | current | The number of delay from source to destination that are successfully measured. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.14 | ColumnhpnicfNqaResultsMinDelaySD | read-only | current | The minimum of all one way times from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.15 | ColumnhpnicfNqaResultsSumDelaySD | read-only | current | The sum of one way times from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.16 | ColumnhpnicfNqaResultsSum2DelaySD | read-only | current | The sum of squares of one way times from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.17 | ColumnhpnicfNqaResultsNumOfDelayDS | read-only | current | The number of delay from destination to source that are successfully measured. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.18 | ColumnhpnicfNqaResultsMinDelayDS | read-only | current | The minimum of all one way times from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.19 | ColumnhpnicfNqaResultsSumDelayDS | read-only | current | The sum of one way times from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.20 | ColumnhpnicfNqaResultsSum2DelayDS | read-only | current | The sum of squares of one way times from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4 | TablehpnicfNqaJitterStatsTable | not-accessible | current | Statistics table for latest jitter activity. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1 | RowhpnicfNqaJitterStatsEntry | not-accessible | current | An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is hpnicfNqajitter. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.1 | ColumnhpnicfNqaJitterStatsNumOfRTT | read-only | current | The number of received destination device responses with which jitter test can reach round-trip time. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.2 | ColumnhpnicfNqaJitterStatsMinOfPositivesSD | read-only | current | The value of time that records the minimal positive jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.3 | ColumnhpnicfNqaJitterStatsMaxOfPositivesSD | read-only | current | The value of time that records the maximal positive jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.4 | ColumnhpnicfNqaJitterStatsNumOfPositivesSD | read-only | current | The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets s… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.5 | ColumnhpnicfNqaJitterStatsSumOfPositivesSD | read-only | current | The value of time that records the sum of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.6 | ColumnhpnicfNqaJitterStatsSum2PositivesSD | read-only | current | The value of time that records the sum of square of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.7 | ColumnhpnicfNqaJitterStatsMinOfNegativesSD | read-only | current | The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.8 | ColumnhpnicfNqaJitterStatsMaxOfNegativesSD | read-only | current | The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.9 | ColumnhpnicfNqaJitterStatsNumOfNegativesSD | read-only | current | The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent fro… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.10 | ColumnhpnicfNqaJitterStatsSumOfNegativesSD | read-only | current | The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative j… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.11 | ColumnhpnicfNqaJitterStatsSum2NegativesSD | read-only | current | The value of time that records the sum of square of negative jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.12 | ColumnhpnicfNqaJitterStatsMinOfPositivesDS | read-only | current | The value of time that records the minimal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.13 | ColumnhpnicfNqaJitterStatsMaxOfPositivesDS | read-only | current | The value of time that records the maximal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.14 | ColumnhpnicfNqaJitterStatsNumOfPositivesDS | read-only | current | The number that records positive jitter times from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.15 | ColumnhpnicfNqaJitterStatsSumOfPositivesDS | read-only | current | The value of time that records the sum of positive jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.16 | ColumnhpnicfNqaJitterStatsSum2PositivesDS | read-only | current | The value of time that records the sum of square of positive jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.17 | ColumnhpnicfNqaJitterStatsMinOfNegativesDS | read-only | current | The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.18 | ColumnhpnicfNqaJitterStatsMaxOfNegativesDS | read-only | current | The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.19 | ColumnhpnicfNqaJitterStatsNumOfNegativesDS | read-only | current | The number that records negative jitter times from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.20 | ColumnhpnicfNqaJitterStatsSumOfNegativesDS | read-only | current | The value of time that records the sum of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.21 | ColumnhpnicfNqaJitterStatsSum2NegativesDS | read-only | current | The value of time that records the sum of square of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.22 | ColumnhpnicfNqaJitterStatsPacketLossSD | read-only | current | The lost packets number sent from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.23 | ColumnhpnicfNqaJitterStatsPacketLossDS | read-only | current | The lost packets number sent from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.24 | ColumnhpnicfNqaJitterStatsAvePositivesSD | read-only | current | The value of time that records the average positive jitter value from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.25 | ColumnhpnicfNqaJitterStatsAveNegativesSD | read-only | current | The value of time that records the average negative jitter value from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.26 | ColumnhpnicfNqaJitterStatsAvePositivesDS | read-only | current | The value of time that records the average positive jitter value from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.27 | ColumnhpnicfNqaJitterStatsAveNegativesDS | read-only | current | The value of time that records the average negative jitter value from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.28 | ColumnhpnicfNqaJitterStatsPktLossUnknown | read-only | current | The number of packets which is lost with unknown reason. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.29 | ColumnhpnicfNqaJitterStatsOperOfICPIF | read-only | current | The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.30 | ColumnhpnicfNqaJitterStatsOperOfMOS | read-only | current | The MOS (Mean Opinion Score) value for the latest jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.5 | ScalarhpnicfNqaAgentEnable | read-write | current | Enable NQA agent function. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.6 | TablehpnicfNqaTcpServerTable | not-accessible | current | A table which contains the status of NQA tcp server configuration information. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1 | RowhpnicfNqaTcpServerEntry | not-accessible | current | A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server p… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.1 | ColumnhpnicfNqaTcpServerIpAddress | not-accessible | current | Tcp server's ip address. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.2 | ColumnhpnicfNqaTcpServerPort | not-accessible | current | Tcp server's port number. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.3 | ColumnhpnicfNqaTcpServerRowStatus | read-create | current | hpnicfNqaTcpServerIpAddress and hpnicfNqaTcpServerPort must be set during a creation operation. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.7 | TablehpnicfNqaUdpServerTable | not-accessible | current | Status of NQA udp server configuration information. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1 | RowhpnicfNqaUdpServerEntry | not-accessible | current | This entry includes not only the udp server ip address but also the udp server udp port. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.1 | ColumnhpnicfNqaUdpServerIpAddress | not-accessible | current | Udp server's ip address. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.2 | ColumnhpnicfNqaUdpServerPort | not-accessible | current | Udp server's port number. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.3 | ColumnhpnicfNqaUdpServerRowStatus | read-create | current | hpnicfNqaUdpServerIpAddress and hpnicfNqaUdpServerPort must be set during a creation operation. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.8 | ScalarhpnicfNqaServerEnable | read-write | current | Enable NQA server function. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.9 | ScalarhpnicfNqaStatsMaxGroupNumber | read-only | current | The maximum number saved per group. The maximum value of hpnicfNqaCtlStatisticsGroupNumber can not exceed the value of this object. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.10 | TablehpnicfNqaStatisticsCtlTable | not-accessible | current | Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1 | RowhpnicfNqaStatisticsCtlEntry | not-accessible | current | Defines an entry in the hpnicfNqaStatisticsCtlTable. The hpnicfNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a hpnicfNqaStatisticsC… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.1 | ColumnhpnicfNqaCtlStatisticsInterval | read-create | current | Statistic information will be calculated after the time that is the value of hpnicfNqaCtlStatisticsInterval. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.2 | ColumnhpnicfNqaCtlStatisticsGroupNumber | read-create | current | The value of this object indicates the number of group saved. The length of this object is from 1 to hpnicfNqaStatsMaxGroupNumber. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.3 | ColumnhpnicfNqaCtlStatisticsKeptTime | read-create | current | To indicate how long the statistic information will be saved after the test stops. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.4 | ColumnhpnicfNqaCtlBeginTime | read-create | current | Time at which the type-specified test will start. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.5 | ColumnhpnicfNqaCtlLifeTime | read-create | current | To indicate how long the type-specified test will last. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11 | TablehpnicfNqaStatisticsResultsTable | not-accessible | current | Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1 | RowhpnicfNqaStatisticsResultsEntry | not-accessible | current | Defines an entry in the hpnicfNqaStatisticsResultsTable. The hpnicfNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a hpnicfNqaSta… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.1 | ColumnhpnicfNqaStatResIndex | not-accessible | current | An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hpnicfNqaStatResIndex values … |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.2 | ColumnhpnicfNqaStatResIpTargetAddressType | read-only | current | This object indicates the type of address stored in the corresponding hpnicfNqaStatResIpTargetAddress object. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.3 | ColumnhpnicfNqaStatResIpTargetAddress | read-only | current | This object represent the host address to be used at a remote host for performing a network analysis operation. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.4 | ColumnhpnicfNqaStatResMinRtt | read-only | current | The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.5 | ColumnhpnicfNqaStatResMaxRtt | read-only | current | The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.6 | ColumnhpnicfNqaStatResAverageRtt | read-only | current | The average NQA probe round-trip-time (RTT). |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.7 | ColumnhpnicfNqaStatResProbeResponses | read-only | current | The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.8 | ColumnhpnicfNqaStatResSentProbes | read-only | current | The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.9 | ColumnhpnicfNqaStatResRttSumOfSquares | read-only | current | This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been rece… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.10 | ColumnhpnicfNqaStatResStartTime | read-only | current | This object contains the start time of the statistic. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.11 | ColumnhpnicfNqaStatResInterval | read-only | current | This object contains the interval between two times of statistic. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.12 | ColumnhpnicfNqaStatResRttNumDisconnects | read-only | current | The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.13 | ColumnhpnicfNqaStatResRttTimeouts | read-only | current | The number of times that a probe failed because the probe timed out. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.14 | ColumnhpnicfNqaStatResRttBusies | read-only | current | The number of times that a NQA probe failed because errors related to sockets. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.15 | ColumnhpnicfNqaStatResRttNoConnections | read-only | current | The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.16 | ColumnhpnicfNqaStatResRttDrops | read-only | current | The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.17 | ColumnhpnicfNqaStatResRttSequenceErrors | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.18 | ColumnhpnicfNqaStatResRttErrors | read-only | current | The number of other errors. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.19 | ColumnhpnicfNqaStatResLostPacketRatio | read-only | current | The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent pack… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.20 | ColumnhpnicfNqaStatResPacketLateArrival | read-only | current | The value of this object reflects the number of the packets that arrived after the timeout. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.21 | ColumnhpnicfNqaStatResRttSum | read-only | current | This object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.22 | ColumnhpnicfNqaStatResNumOfDelaySD | read-only | current | The number of one way times from source to destination that are successfully measured. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.23 | ColumnhpnicfNqaStatResMinDelaySD | read-only | current | The minimum one way times from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.24 | ColumnhpnicfNqaStatResMaxDelaySD | read-only | current | The maximum one way times from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.25 | ColumnhpnicfNqaStatResSumDelaySD | read-only | current | The sum of one way times from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.26 | ColumnhpnicfNqaStatResSum2DelaySD | read-only | current | The sum of squares of one way times from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.27 | ColumnhpnicfNqaStatResNumOfDelayDS | read-only | current | The number of one way times from destination to source that are successfully measured. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.28 | ColumnhpnicfNqaStatResMinDelayDS | read-only | current | The minimum one way times from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.29 | ColumnhpnicfNqaStatResMaxDelayDS | read-only | current | The maximum one way times from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.30 | ColumnhpnicfNqaStatResSumDelayDS | read-only | current | The sum of one way times from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.31 | ColumnhpnicfNqaStatResSum2DelayDS | read-only | current | The sum of squares of one way times from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12 | TablehpnicfNqaGroupStatsJitterTable | not-accessible | current | Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of hpnicfNqaCtlStatisticsInterval. The first two index id… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1 | RowhpnicfNqaGroupStatsJitterEntry | not-accessible | current | An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is hpnicfNqajitter. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.1 | ColumnhpnicfNqaStatJitterIndex | not-accessible | current | An entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning hpnicfNqa… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.2 | ColumnhpnicfNqaStatJitterMinOfPosSD | read-only | current | The value of time that records the minimal positive jitter value from source to destination in jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.3 | ColumnhpnicfNqaStatJitterMaxOfPosSD | read-only | current | The value of time that records the maximal positive jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.4 | ColumnhpnicfNqaStatJitterNumOfPosSD | read-only | current | The total number of positive jitters from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.5 | ColumnhpnicfNqaStatJitterSumOfPosSD | read-only | current | The value of time that records the sum of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.6 | ColumnhpnicfNqaStatJitterSumOfSquarePosSD | read-only | current | The value of time that records the sum of square of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.7 | ColumnhpnicfNqaStatJitterMinOfNegSD | read-only | current | The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.8 | ColumnhpnicfNqaStatJitterMaxOfNegSD | read-only | current | The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.9 | ColumnhpnicfNqaStatJitterNumOfNegSD | read-only | current | The total number of negative jitters from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.10 | ColumnhpnicfNqaStatJitterSumOfNegSD | read-only | current | The value of time that records the sum of negative jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.11 | ColumnhpnicfNqaStatJitterSumOfSquareNegSD | read-only | current | The value of time that records the sum of square of negative jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.12 | ColumnhpnicfNqaStatJitterMinOfPosDS | read-only | current | The value of time that records the minimal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.13 | ColumnhpnicfNqaStatJitterMaxOfPosDS | read-only | current | The value of time that records the maximal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.14 | ColumnhpnicfNqaStatJitterNumOfPosDS | read-only | current | The total number of positive jitters from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.15 | ColumnhpnicfNqaStatJitterSumOfPosDS | read-only | current | The value of time that records the sum of positive jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.16 | ColumnhpnicfNqaStatJitterSumOfSquarePosDS | read-only | current | The value of time that records the sum of square of positive jitter values destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.17 | ColumnhpnicfNqaStatJitterMinOfNegDS | read-only | current | The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.18 | ColumnhpnicfNqaStatJitterMaxOfNegDS | read-only | current | The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.19 | ColumnhpnicfNqaStatJitterNumOfNegDS | read-only | current | The total number of negative jitters from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.20 | ColumnhpnicfNqaStatJitterSumOfNegDS | read-only | current | The value of time that records the sum of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.21 | ColumnhpnicfNqaStatJitterSumOfSquareNegDS | read-only | current | The value of time that records the sum of square of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.22 | ColumnhpnicfNqaStatJitterPacketLossSD | read-only | current | The lost packets number sent from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.23 | ColumnhpnicfNqaStatJitterPacketLossDS | read-only | current | The lost packets number sent from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.24 | ColumnhpnicfNqaStatJitterAvePosSD | read-only | current | The value of time that records the average positive jitter value from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.25 | ColumnhpnicfNqaStatJitterAveNegSD | read-only | current | The value of time that records the average negative jitter value from source to destination. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.26 | ColumnhpnicfNqaStatJitterAvePosDS | read-only | current | The value of time that records the average positive jitter value from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.27 | ColumnhpnicfNqaStatJitterAveNegDS | read-only | current | The value of time that records the average negative jitter value from destination to source. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.28 | ColumnhpnicfNqaStatJitterPktLossUnknown | read-only | current | The number of packets which is lost with unknown reason. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.29 | ColumnhpnicfNqaStatJitterMaxOfICPIF | read-only | current | The maximum of all ICPIF values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.30 | ColumnhpnicfNqaStatJitterMinOfICPIF | read-only | current | The minimum of all ICPIF values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.31 | ColumnhpnicfNqaStatJitterMaxOfMOS | read-only | current | The maximum of all MOS values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.32 | ColumnhpnicfNqaStatJitterMinOfMOS | read-only | current | The minimum of all MOS values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13 | TablehpnicfNqaReactionTable | not-accessible | current | A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is … |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1 | RowhpnicfNqaReactionEntry | not-accessible | current | Defines an entry in the hpnicfNqaReactionTable. The first two index elements identify the pingCtlEntry that a hpnicfNqaReactItemIndex belongs to. The third ind… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.1 | ColumnhpnicfNqaReactOwnerIndex | accessible-for-notify | current | The first index of hpnicfNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. hpnicfNqaReactOwnerIndex and hpnicfNqaReactTestName identify an… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.2 | ColumnhpnicfNqaReactTestName | accessible-for-notify | current | The second index of hpnicfNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. hpnicfNqaReactOwnerIndex and hpnicfNqaReactTestName identify an … |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.3 | ColumnhpnicfNqaReactItemIndex | accessible-for-notify | current | The third index of hpnicfNqaReactionTable, it definitely identifies one of the reaction configurations for a test. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.4 | ColumnhpnicfNqaReactCheckedElement | read-create | current | A list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not hpnicfNqajitter. 'jitterOwdSD': one way time fr… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.5 | ColumnhpnicfNqaReactThresholdUpperLimit | read-create | current | This object defines an administrative upper-threshold value for hpnicfNqaReactCheckedElement. The value of this object is zero if hpnicfNqaReactCheckedElement … |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.6 | ColumnhpnicfNqaReactThresholdLowerLimit | read-create | current | This object defines an administrative lower-threshold value for hpnicfNqaReactCheckedElement. The value of hpnicfNqaReactThresholdLowerLimit should be equal or… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.7 | ColumnhpnicfNqaReactThresholdType | read-create | current | This object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.8 | ColumnhpnicfNqaReactThresholdConsecNum | read-create | current | This object defines a consecutive threshold limit. The value is zero when hpnicfNqaReactThresholdType is not 'consecutive'. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.9 | ColumnhpnicfNqaReactThresholdAccumNum | read-create | current | This object defines an accumulative threshold limit. The value is zero when the hpnicfNqaReactThresholdType is not 'accumulative'. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.10 | ColumnhpnicfNqaReactActionType | read-create | current | Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap … |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.11 | ColumnhpnicfNqaReactCurrentStatus | read-only | current | Specifies the current status of this reaction entry: invalid - The status of the reaction entry is unknown. overThreshold - The status of the reaction entry is… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.12 | ColumnhpnicfNqaReactRowStatus | read-create | current | This object allows entries to be created and deleted in the hpnicfNqaReactionTable. Creation of an entry in this table results in a new set of reaction configu… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.13 | ColumnhpnicfNqaReactCheckedNum | read-only | current | The number of checked element samples that are monitored. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.14 | ColumnhpnicfNqaReactThresholdNum | read-only | current | The number of checked element samples that are over threshold. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.14 | TablehpnicfNqaStatisticsReactionTable | not-accessible | current | A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is … |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1 | RowhpnicfNqaStatisticsReactionEntry | not-accessible | current | Defines an entry in the hpnicfNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a hpnicfNqaReactItemIndex belongs to. The… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.1 | ColumnhpnicfNqaStatReactOwnerIndex | not-accessible | current | The first index of hpnicfNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.2 | ColumnhpnicfNqaStatReactTestName | not-accessible | current | The second index of hpnicfNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.3 | ColumnhpnicfNqaStatReactIndex | not-accessible | current | The third index of hpnicfNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementati… |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.4 | ColumnhpnicfNqaStatReactItemIndex | not-accessible | current | The forth index of hpnicfNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.5 | ColumnhpnicfNqaStatReactCheckedNum | read-only | current | The number of checked element samples that are monitored. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.6 | ColumnhpnicfNqaStatReactThresholdNum | read-only | current | The number of checked element samples that are over threshold. |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.2 | NodehpnicfNqaImplementationTypeDomains | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.3.2.1 | IdentityhpnicfNqaUdpEcho | current | Indicates that an implementation is using the UDP based echo server. Notes: The hpnicfNqaCtlTargetPort and hpnicfNqaCtlSourcePort need to be set, while in the … | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.2.2 | IdentityhpnicfNqaTcpconnect | current | Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hpnicfNqaCtlTargetPort and hpnicfNq… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.2.3 | IdentityhpnicfNqajitter | current | Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.2.4 | IdentityhpnicfNqaHttp | current | Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP S… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.2.5 | IdentityhpnicfNqadlsw | current | Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the res… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.2.6 | IdentityhpnicfNqadhcp | current | Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown … | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.2.7 | IdentityhpnicfNqaftp | current | Indicates that an implementation is using tcp packet for ftp connect and data transfer. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3 | NodehpnicfNqaNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3.1 | NotificationhpnicfNqaProbeTimeOverThreshold | current | It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. Th… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3.2 | NotificationhpnicfNqaJitterRTTOverThreshold | current | It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. Th… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3.3 | NotificationhpnicfNqaProbeFailure | current | It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. Th… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3.4 | NotificationhpnicfNqaJitterPacketLoss | current | It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. Th… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3.5 | NotificationhpnicfNqaJitterSDOverThreshold | current | The SD means the jitter values from source to destination. It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3.6 | NotificationhpnicfNqaJitterDSOverThreshold | current | The DS means the jitter values from destination to source. It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3.7 | NotificationhpnicfNqaICPIFOverThreshold | current | It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. Th… | |
| 1.3.6.1.4.1.11.2.14.11.15.8.3.3.8 | NotificationhpnicfNqaMOSOverThreshold | current | It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. Th… |