HPN-ICF-NTP-MIB
63 objects
This MIB provides mechanisms to monitor a NTP server.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfRhw |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.22 | IdentityhpnicfNTP | This MIB provides mechanisms to monitor a NTP server. | ||
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1 | NodehpnicfNTPSystemMIB | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1 | NodehpnicfNTPSystemMIBObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.1 | ScalarhpnicfNTPSysLeap | read-only | current | Leap Indicator (LI): This is a two-bit code warning of an impending leap second to be inserted/deleted in the last minute of the current day, with bit 0 and bi… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.2 | ScalarhpnicfNTPSysStratum | read-only | current | This is an eight-bit integer indicating the stratum level of the local clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.3 | ScalarhpnicfNTPSysPrecision | read-only | current | Precision : This is a signed integer indicating the precision of the various clocks, in seconds to the nearest power of two. The value must be rounded to the n… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.4 | ScalarhpnicfNTPSysRootdelay | read-only | current | Root Delay : This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.5 | ScalarhpnicfNTPSysRootdispersion | read-only | current | Root Dispersion : This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization … |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.6 | ScalarhpnicfNTPSysRefid | read-only | current | Reference Clock Identifier : This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (primary ref… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.7 | ScalarhpnicfNTPSysReftime | read-only | current | Reference Timestamp : This is the local time, in timestamp format, when the local clock was last updated. If the local clock has never been synchronized, the v… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.8 | ScalarhpnicfNTPSysPoll | read-only | current | Poll Interval : This is a signed integer indicating the minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of s… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.9 | ScalarhpnicfNTPSysPeer | read-only | obsolete | This is a selector identifying the current synchronization source. Usually this will be a pointer to a structure containing the peer variables. The special val… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.10 | ScalarhpnicfNTPSysState | read-only | current | This is a integer indicating the state of local clock. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.11 | ScalarhpnicfNTPSysOffset | read-only | current | The offset of two clocks is the time difference between them, in milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.12 | ScalarhpnicfNTPSysDrift | read-only | current | Real clocks exhibit some variation in skew (second derivative of offset with time), which is called drift. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.13 | ScalarhpnicfNTPSysCompliance | read-only | current | This is a string indicating the system error. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.14 | ScalarhpnicfNTPSysClock | read-only | current | This is the current local time, in timestamp format. Local time is derived from the hardware clock of the particular machine and increments at intervals depend… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.15 | ScalarhpnicfNTPSysStabil | read-only | current | This is a indicating that stability of a clock is how well it can maintain a constant frequency. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.16 | ScalarhpnicfNTPSysAuthenticate | read-write | current | This is a integer indicating that system support authentication. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.17 | ScalarhpnicfNTPSysPollSec | read-write | current | PollSec Interval : This is a integer indicating the minimum interval between transmitted messages. For instance, a value of six indicates a minimum interval of… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.18 | ScalarhpnicfNTPSysClockSec | read-only | current | This is the current local time, in integer format. Local time is derived from the hardware clock of the particular machine and increments at intervals dependin… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.19 | ScalarhpnicfNTPServerIP | read-write | current | The NTP server ip address. It must be a unicast address, rather than a broadcast address, a multicast address or the IP address of the local clock. To delete a… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.20 | ScalarhpnicfNTPSysSrcPeer | read-only | current | This is a selector identifying the current synchronization source. Usually this will be a unsigned integer containing the peer variables. The special value 0 i… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2 | NodehpnicfNTPPeerMIB | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1 | NodehpnicfNTPPeerMIBObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1 | TablehpnicfNTPPeerTable | not-accessible | current | This table provides information on the peers with which the local NTP server has associations. The peers are also NTP servers but running on different hosts. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1 | RowhpnicfNTPPeerEntry | not-accessible | current | Each peers' entry provides NTP information retrieved from a particular peer NTP server. Each peer is identified by a unique association identifier. Entries are… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.1 | ColumnhpnicfNTPPeerConfig | read-only | current | This is a bit indicating that the association was created from configuration information and should not be demobilized if the peer becomes unreachable. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.2 | ColumnhpnicfNTPPeerAuthenable | read-only | current | This is a bit indicating that system support authentication. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.3 | ColumnhpnicfNTPPeerAuthentic | read-only | current | This is a bit indicating that massage pass authentication which is authentic. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.4 | ColumnhpnicfNTPPeerRemAdr | not-accessible | current | The IP address of the peer. When creating a new association, a value for this object should be set before the row is made active. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.5 | ColumnhpnicfNTPPeerRemPort | read-only | current | The UDP port number on which the peer receives NTP messages. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.6 | ColumnhpnicfNTPPeerLocAdr | read-only | current | The IP address of the local host. Multi-homing can be supported using this object. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.7 | ColumnhpnicfNTPPeerLocPort | read-only | current | The UDP port number on which the local host receives NTP messages. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.8 | ColumnhpnicfNTPPeerLeap | read-only | current | This is a two-bit code warning of an impending leap second to be inserted in the NTP timescale. The bits are set before 23:59 on the day of insertion and reset… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.9 | ColumnhpnicfNTPPeerHMode | not-accessible | current | This is an integer indicating the association mode, with values coded as follows, 0, unspecified 1, symmetric active - A host operating in this mode sends peri… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.10 | ColumnhpnicfNTPPeerStratum | read-only | current | This is a integer indicating the stratum level of the peer clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio clock) 2-25… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.11 | ColumnhpnicfNTPPeerPPoll | read-only | current | The interval at which the peer polls the local host. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.12 | ColumnhpnicfNTPPeerHPoll | read-only | current | The interval at which the local host polls the peer. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.13 | ColumnhpnicfNTPPeerPrecision | read-only | current | This is a signed integer indicating the precision of the peer clock, in seconds to the nearest power of two. The value must be rounded to the next larger power… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.14 | ColumnhpnicfNTPPeerRootDelay | read-only | current | This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in millisec… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.15 | ColumnhpnicfNTPPeerRootDispersion | read-only | current | This is a signed fixed-point number indicating the maximum error of the peer clock relative to the primary reference source at the root of the synchronization … |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.16 | ColumnhpnicfNTPPeerRefId | read-only | current | The reference identifier of the peer. This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (pr… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.17 | ColumnhpnicfNTPPeerRefTime | read-only | current | This is the local time at the peer, in timestamp format, when the local clock was last updated. If the local clock has never been synchronized, the value is ze… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.18 | ColumnhpnicfNTPPeerOrg | read-only | current | This is the local time, in timestamp format, at the peer when it's latest NTP message was sent. If the peer becomes unreachable the value is set to zero |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.19 | ColumnhpnicfNTPPeerRec | read-only | current | This is the local time, in timestamp format, when the latest NTP message from the peer arrived. If the peer becomes unreachable the value is set to zero. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.20 | ColumnhpnicfNTPPeerXmt | read-only | current | This is the local time, in timestamp format, at which the NTP message departed the sender. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.21 | ColumnhpnicfNTPPeerReach | read-only | current | This is a shift register of NTP.WINDOW bits used to determine the reach ability status of the peer, with bits entering from the least significant (rightmost) e… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.22 | ColumnhpnicfNTPPeerValid | read-only | current | This is an integer counter indicating the valid samples remaining in the filter register. It is used to determine the reach ability state and when the poll int… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.23 | ColumnhpnicfNTPPeerTimer | read-only | current | This is an integer counter used to control the interval of transmitted NTP messages from the local host to the peer. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.24 | ColumnhpnicfNTPPeerDelay | read-only | current | This is a signed fixed-point number indicating the roundtrip delay of the peer clock relative to the local clock over the network path between them, in millise… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.25 | ColumnhpnicfNTPPeerOffset | read-only | current | This is a signed, fixed-point number indicating the offset of the peer clock relative to the local clock, in milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.26 | ColumnhpnicfNTPPeerJitter | read-only | current | This is an indicating that peer of sample Variance |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.27 | ColumnhpnicfNTPPeerDispersion | read-only | current | This is a signed fixed-point number indicating the maximum error of the peer clock relative to the local clock over the network path between them, in milliseco… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.28 | ColumnhpnicfNTPPeerKeyId | read-only | current | This is an unsigned integer identifying the cryptographic key used to generate the message-authentication code. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.29 | ColumnhpnicfNTPPeerFiltDelay | read-only | current | Round-trip delay of the peer clock relative to the local clock over the network path between them, in milliseconds. This variable can take on both positive and… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.30 | ColumnhpnicfNTPPeerFiltOffset | read-only | current | The offset of the peer clock relative to the local clock in milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.31 | ColumnhpnicfNTPPeerFiltError | read-only | current | The maximum error of the peer clock relative to the local clock over the network path between them, in milliseconds. Only positive values greater than zero are… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.32 | ColumnhpnicfNTPPeerPMode | read-only | current | This is an integer indicating the association mode, with values coded as follows, 0, unspecified 1, symmetric active - A host operating in this mode sends peri… |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.33 | ColumnhpnicfNTPPeerReceived | read-only | current | The number of received massages. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.34 | ColumnhpnicfNTPPeerSent | read-only | current | The number of send massages. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.35 | ColumnhpnicfNTPPeerFlash | read-only | current | The information about the massage. |
| 1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.36 | ColumnhpnicfNTPPeerRowStatus | read-create | current | The status object for this row. When a management station is creating a new row, it should set the value for cntpPeersPeerAddress at least, before the row can … |