HPN-ICF-QINQ-MIB
43 objects
802.1Q-in-Q MIB
Imported Objects
| HPN-ICF-OID-MIB | hpnicfCommon |
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.69 | IdentityhpnicfQINQ | 802.1Q-in-Q MIB | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1 | NodehpnicfQinQMibObject | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1 | NodehpnicfQinQGlobalConfigGroup | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.1 | ScalarhpnicfQinQBpduTunnelSwitch | read-write | current | The global configuration switch of BPDU 802.1q tunnel. If global configuration is disabled, BPDU tunnel function will be disabled despite of the corresponding … |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.2 | ScalarhpnicfQinQEthernetTypeValue | read-write | current | Ethernet protocol type configuring for a global value. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.… |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.3 | ScalarhpnicfQinQServiceTPIDValue | read-write | current | Ethernet protocol type configured for service VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag descri… |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.4 | ScalarhpnicfQinQCustomerTPIDValue | read-write | current | Ethernet protocol type configured for customer VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag descr… |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2 | TablehpnicfQinQBpduTunnelTable | not-accessible | current | A table for configuring 802.1q BPDU tunnel function for interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1 | RowhpnicfQinQBpduTunnelEntry | not-accessible | current | An entry for configuring 802.1q BPDU tunnel function for interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.1 | ColumnhpnicfQinQProtocolIndex | not-accessible | current | The index of protocol on which the BPDU tunnel state will be set. 'bpdu' represents status of BPDU tunnel. 'stp' represents STP tunnel. 'gmosaic' represents GM… |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.2 | ColumnhpnicfQinQBpduRowStatus | read-create | current | Operation status of this table entry. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3 | TablehpnicfQinQPriorityRemarkTable | not-accessible | current | A table for configuring priority field in 802.1Q-in-Q outer VLAN tag for interfaces. This feature uses the priority of an inner VLAN tag to remark the priority… |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1 | RowhpnicfQinQPriorityRemarkEntry | not-accessible | current | An entry for configuring priority remark function for interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.1 | ColumnhpnicfQinQPriorityValue | not-accessible | current | The priority value in inner VLAN tag. Since the priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to th… |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.2 | ColumnhpnicfQinQPriorityRemarkValue | read-create | current | The new priority value used to fill outer tag. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.3 | ColumnhpnicfQinQPriorityRowStatus | read-create | current | Operation status of this table entry. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4 | TablehpnicfQinQVidTable | not-accessible | current | A table for configuring VLAN ID of the 802.1Q-in-Q interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1 | RowhpnicfQinQVidEntry | not-accessible | current | An entry for configuring VLAN ID of the 802.1Q-in-Q interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.1 | ColumnhpnicfQinQVlanID | not-accessible | current | VLAN ID |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.2 | ColumnhpnicfQinQInboundVidListLow | read-create | current | The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 1 to 2048. The length of bitmap is 256 in bytes. Each o… |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.3 | ColumnhpnicfQinQInboundVidListHigh | read-create | current | The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 2049 to 4094. The length of bitmap is 256 in bytes. Eac… |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.4 | ColumnhpnicfQinQVidEthernetType | read-create | current | Ethernet protocol type configuring for a VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.5 | ColumnhpnicfQinQVidRowStatus | read-create | current | Operation status of this table entry. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5 | TablehpnicfQinQVidSwapTable | not-accessible | current | A table for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1 | RowhpnicfQinQVidSwapEntry | not-accessible | current | An entry for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.1 | ColumnhpnicfQinQVidSwapOld | not-accessible | current | The old VLAN ID of original 802.1Q packets. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.2 | ColumnhpnicfQinQVidSwapNew | read-create | current | The new VLAN ID of original 802.1Q packets. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.3 | ColumnhpnicfQinQVidSwapRowStatus | read-create | current | Operation status of this table entry. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6 | TablehpnicfQinQPrioritySwapTable | not-accessible | current | A table for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces. Using this function, the priority of inner VLAN tag can be modified. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1 | RowhpnicfQinQPrioritySwapEntry | not-accessible | current | An entry for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.1 | ColumnhpnicfQinQPrioritySwapOld | not-accessible | current | The old priority of original 802.1Q packets. It is the priority of inner VLAN tag. Since the VLAN priority range is from 0 to 7, yet the index range is from 1 … |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.2 | ColumnhpnicfQinQPrioritySwapNew | read-create | current | The new priority of original 802.1Q packets. It is the priority of inner VLAN tag after swapped. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.3 | ColumnhpnicfQinQPrioritySwapRowStatus | read-create | current | Operation status of this table entry. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7 | TablehpnicfQinQIfConfigTable | not-accessible | current | A table for configuring 802.1Q-in-Q functions for interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1 | RowhpnicfQinQIfConfigEntry | not-accessible | current | An entry for configuring 802.1Q-in-Q functions for interfaces. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.1 | ColumnhpnicfQinQIfEthernetType | read-create | current | Ethernet protocol type configuring for an interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.2 | ColumnhpnicfQinQIfSwitch | read-create | current | Switch of 802.1Q-in-Q functions configuring for an interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.3 | ColumnhpnicfQinQIfRowStatus | read-create | current | Operation status of this table entry. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.4 | ColumnhpnicfQinQIfServiceTPIDValue | read-create | current | Service TPID value configured for an interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.5 | ColumnhpnicfQinQIfCustomerTPIDValue | read-create | current | Customer TPID value configured for an interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.6 | ColumnhpnicfQinQIfUplinkSwitch | read-create | current | Switch of the uplink 802.1Q-in-Q function for an interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.7 | ColumnhpnicfQinQIfDownlinkSwitch | read-create | current | Switch of the downlink 802.1Q-in-Q function for an interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HpnicfQinQSwitchState | INTEGER { enabled(1), disabled(2) } | current | An enumerated value which indicates the state of switch. |