HPN-ICF-SUBNET-VLAN-MIB
29 objects
This MIB contains the objects for managing the subnet-based VLAN configurations.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfCommon |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.61 | IdentityhpnicfSubnetVlan | This MIB contains the objects for managing the subnet-based VLAN configurations. | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1 | NodehpnicfSubnetVlanObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.1 | NodehpnicfSubnetVlanScalarObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.1 | ScalarhpnicfSubnetNumAllVlan | read-only | current | The maximum number of subnets that can be configured on all VLANs. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.2 | ScalarhpnicfSubnetNumPerVlan | read-only | current | The maximum number of subnets that can be configured on each VLAN. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.3 | ScalarhpnicfSubnetNumAllPort | read-only | current | The maximum number of subnets that can be applied to all ports. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.4 | ScalarhpnicfSubnetNumPerPort | read-only | current | The maximum number of subnets that can be applied to each port. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.2 | TablehpnicfSubnetVlanTable | not-accessible | current | Subnet-based VLAN configuration table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1 | RowhpnicfSubnetVlanEntry | not-accessible | current | Subnet-based VLAN configuration entry. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.1 | ColumnhpnicfSubnetVlanVlanId | not-accessible | current | Vlan id. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.2 | ColumnhpnicfSubnetVlanSubnetIndex | not-accessible | current | The subnet index value of a row in this table is from zero to the value of hpnicfSubnetNumPerVlan subtracting one. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.3 | ColumnhpnicfSubnetVlanVlanIpAddressType | read-create | current | There are two kinds of ip address supported by VLAN. One is IPv4, which is 32 bits. The other is IPv6, which is 128 bits. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.4 | ColumnhpnicfSubnetVlanIpAddressValue | read-create | current | The ip address of the configured subnet on VLAN, which can be an IPv4 or IPv6. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.5 | ColumnhpnicfSubnetVlanNetMaskValue | read-create | current | The net mask of the configured subnet on VLAN, which can be an IPv4 or IPv6. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.6 | ColumnhpnicfSubnetVlanRowStatus | read-create | current | The row status of this table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.3 | TablehpnicfSubnetVlanPortCreateTable | not-accessible | current | Subnet-based VLAN port table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1 | RowhpnicfSubnetVlanPortCreateEntry | not-accessible | current | Subnet-based VLAN port creation entry. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.1 | ColumnhpnicfSubnetVlanPortCreateIndex | not-accessible | current | The port index. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.2 | ColumnhpnicfSubnetVlanPortCreateVlanId | not-accessible | current | The subnet-based VLAN id. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.3 | ColumnhpnicfSubnetVlanPortInfoVlanId | read-only | current | This value is the same as the value of hpnicfSubnetVlanPortCreateVlanId index. All of the subnet information in this port, is described on vlan, whose VLAN id … |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.4 | ColumnhpnicfSubnetVlanPortRowStatus | read-create | current | The row status of this table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.5 | ColumnhpnicfSubnetVlanPortStatus | read-only | current | The subnet VLAN status on the port. The value is active only when hpnicfSubnetVlanPortCreateVlanId has the corresponding entry in hpnicfSubnetVlanTable, the po… |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.2 | NodehpnicfSubnetVlanConformance | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.61.2.1 | NodehpnicfSubnetVlanCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.61.2.1.1 | CompliancehpnicfSubnetVlanCompliance | current | The compliance statement for subnet VLAN MIB. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.2.2 | NodehpnicfSubnetVlanGroups | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.61.2.2.1 | GrouphpnicfSubnetVlanScalarObjectGroup | current | A group of scalar objects describing the maximum number. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.2.2.2 | GrouphpnicfSubnetVlanSubnetGroup | current | A group of subnet VLAN subnets. | |
| 1.3.6.1.4.1.11.2.14.11.15.2.61.2.2.3 | GrouphpnicfSubnetVlanPortCreateGroup | current | A group of subnet VLAN port creation table. |