HPN-ICF-TRANSCEIVER-INFO-MIB
49 objects
The objects in this MIB module are used to display the information of transceiver on interface.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfCommon |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.70 | IdentityhpnicfTransceiver | The objects in this MIB module are used to display the information of transceiver on interface. | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1 | NodehpnicfTransceiverInfoAdm | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1 | TablehpnicfTransceiverInfoTable | not-accessible | current | This table show the information of transceiver on interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1 | RowhpnicfTransceiverInfoEntry | not-accessible | current | The entry of the hpnicfTransceiverInfoTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.1 | ColumnhpnicfTransceiverHardwareType | read-only | current | Hardware type of the interface, such as SM(single mode). |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.2 | ColumnhpnicfTransceiverType | read-only | current | Type of the interface, such as SFP/XFP/GBIC. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.3 | ColumnhpnicfTransceiverWaveLength | read-only | current | Wave length of the interface, measured in nanometer. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.4 | ColumnhpnicfTransceiverVendorName | read-only | current | Vendor name of the interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.5 | ColumnhpnicfTransceiverSerialNumber | read-only | current | Serial number of the interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.6 | ColumnhpnicfTransceiverFiberDiameterType | read-only | current | The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber … |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.7 | ColumnhpnicfTransceiverTransferDistance | read-only | current | The maximal distance which the interface could transmit, measured in meter. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.8 | ColumnhpnicfTransceiverDiagnostic | read-only | current | Indicating the digital diagnostic monitoring function . |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.9 | ColumnhpnicfTransceiverCurTXPower | read-only | current | Indicating the current transmitted power . The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.10 | ColumnhpnicfTransceiverMaxTXPower | read-only | current | Indicating the maximal transmitted power . The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.11 | ColumnhpnicfTransceiverMinTXPower | read-only | current | Indicating the minimal transmitted power . The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.12 | ColumnhpnicfTransceiverCurRXPower | read-only | current | Indicating the current received power . The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.13 | ColumnhpnicfTransceiverMaxRXPower | read-only | current | Indicating the maximal received power . The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.14 | ColumnhpnicfTransceiverMinRXPower | read-only | current | Indicating the minimal received power . The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.15 | ColumnhpnicfTransceiverTemperature | read-only | current | Indicating the current temperature. The unit is Celsius centigrade. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.16 | ColumnhpnicfTransceiverVoltage | read-only | current | Indicating the current voltage . The unit is in hundredths of V |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.17 | ColumnhpnicfTransceiverBiasCurrent | read-only | current | Indicating the current bias electric current . The unit is in hundredths of mA |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.18 | ColumnhpnicfTransceiverTempHiAlarm | read-only | current | Transceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.19 | ColumnhpnicfTransceiverTempLoAlarm | read-only | current | Transceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.20 | ColumnhpnicfTransceiverTempHiWarn | read-only | current | Transceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.21 | ColumnhpnicfTransceiverTempLoWarn | read-only | current | Transceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.22 | ColumnhpnicfTransceiverVccHiAlarm | read-only | current | Transceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.23 | ColumnhpnicfTransceiverVccLoAlarm | read-only | current | Transceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.24 | ColumnhpnicfTransceiverVccHiWarn | read-only | current | Transceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.25 | ColumnhpnicfTransceiverVccLoWarn | read-only | current | Transceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.26 | ColumnhpnicfTransceiverBiasHiAlarm | read-only | current | Transceiver bias high alarm threshold limit in microamps. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.27 | ColumnhpnicfTransceiverBiasLoAlarm | read-only | current | Transceiver bias low alarm threshold limit in microamps. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.28 | ColumnhpnicfTransceiverBiasHiWarn | read-only | current | Transceiver bias high warning threshold limit in microamps. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.29 | ColumnhpnicfTransceiverBiasLoWarn | read-only | current | Transceiver bias low warning threshold limit in microamps. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.30 | ColumnhpnicfTransceiverPwrOutHiAlarm | read-only | current | Transceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.31 | ColumnhpnicfTransceiverPwrOutLoAlarm | read-only | current | Transceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.32 | ColumnhpnicfTransceiverPwrOutHiWarn | read-only | current | Transceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.33 | ColumnhpnicfTransceiverPwrOutLoWarn | read-only | current | Transceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.34 | ColumnhpnicfTransceiverRcvPwrHiAlarm | read-only | current | Transceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.35 | ColumnhpnicfTransceiverRcvPwrLoAlarm | read-only | current | Transceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.36 | ColumnhpnicfTransceiverRcvPwrHiWarn | read-only | current | Transceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.37 | ColumnhpnicfTransceiverRcvPwrLoWarn | read-only | current | Transceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.38 | ColumnhpnicfTransceiverErrors | read-only | current | Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration m… |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2 | TablehpnicfTransceiverChannelTable | not-accessible | current | This table provides statistics about transceiver with multi-channel. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1 | RowhpnicfTransceiverChannelEntry | not-accessible | current | The entry of the hpnicfTransceiverChannelTable. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.1 | ColumnhpnicfTransceiverChannelIndex | not-accessible | current | The channel index of transceiver. Indicating one channel of the interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.2 | ColumnhpnicfTransceiverChannelCurTXPower | read-only | current | Indicating the current transmission power. The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.3 | ColumnhpnicfTransceiverChannelCurRXPower | read-only | current | Indicating the current received power. The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.4 | ColumnhpnicfTransceiverChannelTemperature | read-only | current | Indicating the current temperature. The unit is Celsius centigrade. |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.5 | ColumnhpnicfTransceiverChannelBiasCurrent | read-only | current | Indicating the current bias electric current. The unit is in hundredths of mA. |