HPN-ICF-USERLOG-MIB
70 objects
The HPN-ICF-USERLOG-MIB contains objects to Manage configuration and Monitor running state for userlog feature.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfRhw |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.18 | IdentityhpnicfUserLogMIB | The HPN-ICF-USERLOG-MIB contains objects to Manage configuration and Monitor running state for userlog feature. | ||
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1 | NodehpnicfUserlogObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1 | NodehpnicfUserlogNatObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.1 | ScalarhpnicfUserlogNatVersion | read-only | current | NAT LOG version. Currently only version 1 is developed. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.2 | ScalarhpnicfUserlogNatSyslog | read-write | current | NAT LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.3 | ScalarhpnicfUserlogNatSourceIP | read-write | current | The Source IP address of NAT LOG UDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.4 | ScalarhpnicfUserlogNatFlowBegin | read-write | current | Log the NAT flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor require… |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.5 | ScalarhpnicfUserlogNatActiveTime | read-write | current | The active time for long-time existed NAT flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, NAT flow can be logged after an interval of act… |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6 | TablehpnicfUserlogNatSlotCfgInfoTable | not-accessible | current | A table of NAT LOG configuration information for the specified slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1 | RowhpnicfUserlogNatSlotCfgInfoEntry | not-accessible | current | NAT LOG Configuration Information Entry for a slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.1 | ColumnhpnicfUserlogNatCfgSlotNumber | read-only | current | Slot number. Specify which slot is configured with NAT LOG. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.2 | ColumnhpnicfUserlogNatEnable | read-write | current | The NAT LOG feature Enable status. If 1, NAT LOG is enbled. If 0, NAT LOG is disabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.3 | ColumnhpnicfUserlogNatAclNumber | read-write | current | Access-list number. The value 0 means no ACL is specified. Only when NAT LOG is enabled, can ACL be configured. Only NAT flow which match the ACL will be logge… |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.4 | ColumnhpnicfUserlogNatHostAddress | read-write | current | The IP address of NAT LOG server. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.5 | ColumnhpnicfUserlogNatUdpPort | read-write | current | The UDP Port Number of NAT LOG UDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7 | TablehpnicfUserlogNatSlotRunInfoTable | not-accessible | current | A table of NAT LOG running information for the specified slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1 | RowhpnicfUserlogNatSlotRunInfoEntry | not-accessible | current | NAT LOG Running Information Entry for a slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.1 | ColumnhpnicfUserlogNatRunSlotNumber | read-only | current | Slot number. Specify on which slot the NAT LOG statistics displayed. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.2 | ColumnhpnicfUserlogNatTotalEntries | read-only | current | The total number of NAT flow entries which are logged. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.3 | ColumnhpnicfUserlogNatTotalPackets | read-only | current | The total number of NAT LOG UDP packets generated by the router. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.4 | ColumnhpnicfUserlogNatFailedEntries | read-only | current | The total number of NAT flow entries failed in outputting. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.5 | ColumnhpnicfUserlogNatFailedPackets | read-only | current | The total number of NAT LOG UDP packets failed in outputting. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.6 | ColumnhpnicfUserlogNatClearRunStat | read-write | current | Clear the running statistics for NAT LOG. Write-only. If 1, the running statistics for NAT LOG is resetted. Other value is invalid. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2 | NodehpnicfUserlogFlowObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.1 | ScalarhpnicfUserlogFlowVersion | read-only | current | BAS FLOW LOG version. Currently only version 1 is developed. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.2 | ScalarhpnicfUserlogFlowSyslog | read-write | current | BAS FLOW LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.3 | ScalarhpnicfUserlogFlowSourceIP | read-write | current | The Source IP address of BAS FLOW LOG UDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.4 | ScalarhpnicfUserlogFlowFlowBegin | read-write | current | Log the BAS flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor require… |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.5 | ScalarhpnicfUserlogFlowActiveTime | read-write | current | The active time for long-time existed BAS flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, BAS flow can be logged after an internal of act… |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6 | TablehpnicfUserlogFlowSlotCfgInfoTable | not-accessible | current | A table of BAS FLOW LOG configuration information for the specified slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1 | RowhpnicfUserlogFlowSlotCfgInfoEntry | not-accessible | current | BAS FLOW LOG Configuration Information Entry for a slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.1 | ColumnhpnicfUserlogFlowCfgSlotNumber | read-only | current | Slot number. Specify which slot is configured with BAS FLOW LOG. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.2 | ColumnhpnicfUserlogFlowEnable | read-write | current | The BAS FLOW LOG feature Enable status. If 1, BAS FLOW LOG is enbled. If 0, BAS FLOW LOG is disabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.3 | ColumnhpnicfUserlogFlowAclNumber | read-write | current | Access-list number. The value 0 means no ACL is specified. Only when BAS FLOW LOG is enabled, can ACL be configured. Only BAS flow which match the ACL will be … |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.4 | ColumnhpnicfUserlogFlowHostAddress | read-write | current | The IP address of BAS FLOW LOG server. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.5 | ColumnhpnicfUserlogFlowUdpPort | read-write | current | The UDP Port Number of BAS FLOW LOG UDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7 | TablehpnicfUserlogFlowSlotRunInfoTable | not-accessible | current | A table of BAS FLOW LOG running information for the specified slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1 | RowhpnicfUserlogFlowSlotRunInfoEntry | not-accessible | current | Running Information Entry for a slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.1 | ColumnhpnicfUserlogFlowRunSlotNumber | read-only | current | Slot number. Specify on which slot the BAS FLOW LOG statistics displayed. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.2 | ColumnhpnicfUserlogFlowTotalEntries | read-only | current | The total number of BAS FLOW Entries which are logged. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.3 | ColumnhpnicfUserlogFlowTotalPackets | read-only | current | The total number of FLOW LOG UDP packet generated by the router. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.4 | ColumnhpnicfUserlogFlowFailedEntries | read-only | current | The total number of BAS FLOW entries failed in outputting. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.5 | ColumnhpnicfUserlogFlowFailedPackets | read-only | current | The total number of BAS FLOW LOG UDP packet failed in outputting. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.6 | ColumnhpnicfUserlogFlowClearRunStat | read-write | current | Clear the running statistics for FLOW LOG. Write-only. If 1, the running statistics for FLOW LOG is resetted. Other value is invalid. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3 | NodehpnicfUserlogAccessObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.1 | ScalarhpnicfUserlogAccessVersion | read-only | current | BAS ACCESS LOG version. Currently only version 1 is developed. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.2 | ScalarhpnicfUserlogAccessSyslog | read-write | current | BAS ACCESS LOG format. If 1, LOG format is sysLog; If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.3 | ScalarhpnicfUserlogAccessSourceIP | read-write | current | The Source IP address of BAS ACCESS LOG UDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4 | TablehpnicfUserlogAccessSlotCfgInfoTable | not-accessible | current | A table of BAS ACCESS LOG configuration information for the specified slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1 | RowhpnicfUserlogAccessSlotCfgInfoEntry | not-accessible | current | BAS ACCESS LOG Configuration Information Entry for a slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.1 | ColumnhpnicfUserlogAccessCfgSlotNumber | read-only | current | Slot number. Specify which slot is configured with BAS ACCESS LOG. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.2 | ColumnhpnicfUserlogAccessEnable | read-write | current | The BAS ACCESS LOG feature Enable status. If 1, BAS ACCESS LOG is enbled. If 0, BAS ACCESS LOG is disabled. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.3 | ColumnhpnicfUserlogAccessHostAddress | read-write | current | The IP address of BAS ACCESS LOG server. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.4 | ColumnhpnicfUserlogAccessUdpPort | read-write | current | The UDP Port Number of BAS ACCESS LOG UDP packet. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5 | TablehpnicfUserlogAccessSlotRunInfoTable | not-accessible | current | A table of BAS ACCESS LOG running information for the specified slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1 | RowhpnicfUserlogAccessSlotRunInfoEntry | not-accessible | current | Running Information Entry for a slot. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.1 | ColumnhpnicfUserlogAccessRunSlotNumber | read-only | current | Slot number. Specify on which slot the BAS ACCESS LOG statistics displayed. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.2 | ColumnhpnicfUserlogAccessTotalEntries | read-only | current | The total number of BAS ACCESS Records which are logged. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.3 | ColumnhpnicfUserlogAccessTotalPackets | read-only | current | The total number of ACCESS LOG UDP packet generated by the router. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.4 | ColumnhpnicfUserlogAccessFailedEntries | read-only | current | The total number of BAS ACCESS entries failed in outputting. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.5 | ColumnhpnicfUserlogAccessFailedPackets | read-only | current | The total number of BAS ACCESS LOG UDP packet failed in outputting. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.6 | ColumnhpnicfUserlogAccessClearRunStat | read-write | current | Clear the running statistics for ACCESS LOG. Write-only. If 1, the running statistics for ACCESS LOG is resetted. Other value is invalid. |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.2 | NodehpnicfUserlogNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.18.3 | NodehpnicfUserlogConformance | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.18.3.1 | NodehpnicfUserlogCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.18.3.1.1 | CompliancehpnicfUserlogCompliance | current | The compliance statement for entities which implement the Userlog mib. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.3.2 | NodehpnicfUserlogGroups | |||
| 1.3.6.1.4.1.11.2.14.11.15.8.18.3.2.1 | GrouphpnicfUserlogMandatoryGroup | current | A collection of objects providing mandatory Userlog information. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.3.2.2 | GrouphpnicfUserlogConfigGroup | current | All configurable parameters of Userlog feature. | |
| 1.3.6.1.4.1.11.2.14.11.15.8.18.3.2.3 | GrouphpnicfUserlogInfoGroup | current | All running information of Userlog feature. |