HPN-ICF-VOICE-IF-MIB
14 objects
This MIB file is to provide the definition of the voice interface general configuration.
Imported Objects
| HPN-ICF-OID-MIB | hpnicfVoice |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13 | IdentityhpnicfVoiceInterface | This MIB file is to provide the definition of the voice interface general configuration. | ||
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1 | NodehpnicfVoiceIfObjects | |||
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1 | TablehpnicfVoiceIfConfigTable | not-accessible | current | The table contains configurable parameters for both analog voice interface and digital voice interface. |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1 | RowhpnicfVoiceIfConfigEntry | not-accessible | current | The entry of voice interface table. |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.1 | ColumnhpnicfVoiceIfCfgCngOn | read-write | current | This object indicates whether the silence gaps should be filled with background noise. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subsc… |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.2 | ColumnhpnicfVoiceIfCfgNonLinearSwitch | read-write | current | This object expresses the nonlinear processing is enable or disable for the voice interface. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice… |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.3 | ColumnhpnicfVoiceIfCfgInputGain | read-write | current | This object indicates the amount of gain added to the receiver side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines … |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.4 | ColumnhpnicfVoiceIfCfgOutputGain | read-write | current | This object indicates the amount of gain added to the send side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and … |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.5 | ColumnhpnicfVoiceIfCfgEchoCancelSwitch | read-write | current | This object indicates whether the echo cancellation is enabled. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.6 | ColumnhpnicfVoiceIfCfgEchoCancelDelay | read-write | current | This object indicates the delay of the echo cancellation for the voice interface. This value couldn't be modified unless hpnicfVoiceIfCfgEchoCancelSwitch is en… |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.7 | ColumnhpnicfVoiceIfCfgTimerDialInterval | read-write | current | The interval, in seconds, between two dialing numbers. The default value of this object is 10 seconds. It is applicable to FXO, FXS, E&M subscriber lines and E… |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.8 | ColumnhpnicfVoiceIfCfgTimerFirstDial | read-write | current | The period of time, in seconds, before dialing the first number. The default value of this object is 10 seconds. It is applicable to FXO, FXS subscriber lines … |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.9 | ColumnhpnicfVoiceIfCfgPrivateline | read-write | current | This object indicates the E.164 phone number for plar mode. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. |
| 1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.10 | ColumnhpnicfVoiceIfCfgRegTone | read-write | current | This object uses 2 or 3 letter country code specify voice parameters of different countrys. This value will take effect on all voice interfaces of all cards on… |