HPNSAHOTSWAPSUBSYSTEM-MIB
33 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.23 | Nodehpnsa | |||
| 1.3.6.1.4.1.11.2.23.20 | NodehpnsaHotSwap | |||
| 1.3.6.1.4.1.11.2.23.20.1 | NodehpnsaHSMibRev | |||
| 1.3.6.1.4.1.11.2.23.20.1.1 | ScalarhpnsaHSMibRevMajor | read-only | mandatory | The major revision level of the MIB. |
| 1.3.6.1.4.1.11.2.23.20.1.2 | ScalarhpnsaHSMibRevMinor | read-only | mandatory | The minor revision level of the MIB. |
| 1.3.6.1.4.1.11.2.23.20.2 | NodehpnsaHSAgent | |||
| 1.3.6.1.4.1.11.2.23.20.2.1 | TablehpnsaHSAgentTable | not-accessible | mandatory | A table of SNMP Agents that satisfy requests for this MIB. |
| 1.3.6.1.4.1.11.2.23.20.2.1.1 | RowhpnsaHSAgentEntry | not-accessible | mandatory | A description of the agents that access Hot Swap Subsystem |
| 1.3.6.1.4.1.11.2.23.20.2.1.1.1 | ColumnhpnsaHSAgentIndex | read-only | mandatory | A unique index for this module description. |
| 1.3.6.1.4.1.11.2.23.20.2.1.1.2 | ColumnhpnsaHSAgentName | read-only | mandatory | Name of the Agent/Agents satisfying SNMP requests for this MIB. |
| 1.3.6.1.4.1.11.2.23.20.2.1.1.3 | ColumnhpnsaHSAgentVersion | read-only | mandatory | Version number of the Agent/Agents satisfying SNMP requests for this MIB. |
| 1.3.6.1.4.1.11.2.23.20.2.1.1.4 | ColumnhpnsaHSAgentDate | read-only | mandatory | The date on which this Agent was created. field octets contents range _________________________________________________ 1 1 years since 1900 0..255 2 2 month 1… |
| 1.3.6.1.4.1.11.2.23.20.3 | NodehpnsaHSModule | |||
| 1.3.6.1.4.1.11.2.23.20.3.1 | TablehpnsaHSModuleTable | not-accessible | mandatory | A table of Hot Swap Subsystem module information entries. |
| 1.3.6.1.4.1.11.2.23.20.3.1.1 | RowhpnsaHSModuleEntry | not-accessible | mandatory | Hot Swap Subsystem module information. |
| 1.3.6.1.4.1.11.2.23.20.3.1.1.1 | ColumnhpnsaHSModuleIndex | read-only | mandatory | A unique index for the Hot Swap module. |
| 1.3.6.1.4.1.11.2.23.20.3.1.1.2 | ColumnhpnsaHSModuleScsiCableType | read-only | mandatory | The SCSI cable type attached to the backplane on the right side a Hot Swap Subsystem cage. |
| 1.3.6.1.4.1.11.2.23.20.3.1.1.3 | ColumnhpnsaHSModuleTempStatus | read-only | mandatory | Status of the Hot Swap Subsystem's temperature sensor. |
| 1.3.6.1.4.1.11.2.23.20.3.1.1.4 | ColumnhpnsaHSModuleSwitchState | read-only | mandatory | Status of the DIP switches on the Hot Swap Subsystem. |
| 1.3.6.1.4.1.11.2.23.20.3.1.1.5 | ColumnhpnsaHSModuleDeviceStartup | read-only | mandatory | State of the Disk Spin Up DIP switch on the Hot Swap Subsystem. 1 = disks spin up with the system after a period of time 2 = disks spin up after receiving SCSI… |
| 1.3.6.1.4.1.11.2.23.20.3.1.1.6 | ColumnhpnsaHSModuleMiddleDrvAddr | read-only | mandatory | State of the Middle Drive Address DIP switch on the Hot Swap Subsystem. 1 = lowest value, either 0 or 8 depending on High Eight Address 2 = default, either 2 o… |
| 1.3.6.1.4.1.11.2.23.20.3.1.1.7 | ColumnhpnsaHSModuleHi8ScsiAddr | read-only | mandatory | State of the High Eight SCSI Address DIP switch on the Hot Swap Subsystem. 1 = SCSI address range from 1 to 7 2 = SCSI address range from 9 to 15 |
| 1.3.6.1.4.1.11.2.23.20.4 | NodehpnsaHSDev | |||
| 1.3.6.1.4.1.11.2.23.20.4.1 | TablehpnsaHSDevTable | not-accessible | mandatory | A table of Hot Swap Subsystem device information entries. |
| 1.3.6.1.4.1.11.2.23.20.4.1.1 | RowhpnsaHSDevEntry | not-accessible | mandatory | Hot Swap Subsystem device information. |
| 1.3.6.1.4.1.11.2.23.20.4.1.1.1 | ColumnhpnsaHSDevModuleIndex | read-only | mandatory | A unique index for the Hot Swap module. |
| 1.3.6.1.4.1.11.2.23.20.4.1.1.2 | ColumnhpnsaHSDevIndex | read-only | mandatory | Physical device number in the Hot Swap Module. |
| 1.3.6.1.4.1.11.2.23.20.4.1.1.3 | ColumnhpnsaHSDevExistence | read-only | mandatory | Defines whether a device exists in the physical slot of the Hot Swap Subsystem. |
| 1.3.6.1.4.1.11.2.23.20.4.1.1.4 | ColumnhpnsaHSDevScsiAddr | read-only | mandatory | SCSI address of the device in the physical slot of the Hot Swap Subsystem. |
| 1.3.6.1.4.1.11.2.23.20.4.1.1.5 | ColumnhpnsaHSDevPowerStatus | read-only | mandatory | Defines whether the power connector of a particular device in the Hot Swap Subsystem is connected. |
| 1.3.6.1.4.1.11.2.23.20.4.2 | ScalarhpnsaHSPwrAlertDelay | read-write | mandatory | Set this variable to non-zero integer value to skip checking the power connection state of Starfish device. |