MIB Viewer

HPNSATRAP-MIB

212 objects
No module-level DESCRIPTION found.
Imported Objects
RFC-1215TRAP-TYPE
RFC1155-SMIenterprises
OIDNameAccessStatusDescription
1.3.6.1.4.1.11Nodehp
1.3.6.1.4.1.11.2Nodenm
1.3.6.1.4.1.11.2.23Nodehpnsa
1.3.6.1.4.1.11.2.23.6NodehpnsaECC
1.3.6.1.4.1.11.2.23.6.4353NodehpnsaEccErrorCorrectedAn ECC single-bit error has been corrected in one of the memory modules
1.3.6.1.4.1.11.2.23.6.4354NodehpnsaEccSBEOverflowError logging for ECC single-bit errors has been disabled due to too many SBE's detected in a short time period
1.3.6.1.4.1.11.2.23.6.4355NodehpnsaEccMemoryResizeECC Memory size has been adjusted during the Power-On-Self-Test during the last boot due to a failed memory module
1.3.6.1.4.1.11.2.23.6.4357NodehpnsaEccMultiBitErrorAn ECC double-bit error has occurred in one of the memory modules
1.3.6.1.4.1.11.2.23.6.4358NodehpnsaEccMultiBitErrorOverflowError logging for ECC multiple-bit errors has been disabled due to too many MBE's detected in a short time period
1.3.6.1.4.1.11.2.23.8NodehpnsaRemoteAssist
1.3.6.1.4.1.11.2.23.8.109NodehpnsaRAVoltServerPowerFailureThe server has lost the power completely.
1.3.6.1.4.1.11.2.23.8.111NodehpnsaRAVoltMinus12VUpperVoltage measured in the server has gone outside of -12V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.113NodehpnsaRAVoltPlus3VUpperVoltage measured in the server has gone outside of +3.3V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.114NodehpnsaRAVoltPlus5VUpperVoltage measured in the server has gone outside of +5V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.115NodehpnsaRAVoltPlus12VUpperVoltage measured in the server has gone outside of +12V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.121NodehpnsaRAVoltMinus12VLowerVoltage measured in the server has gone outside of -12V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.122NodehpnsaRAVoltBatteryLowerThe HP Remote Assistant Card's battery charging circuit is bad.
1.3.6.1.4.1.11.2.23.8.123NodehpnsaRAVoltPlus3VLowerVoltage measured in the server has gone outside of +3.3V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.124NodehpnsaRAVoltPlus5VLowerVoltage measured in the server has gone outside of +5V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.125NodehpnsaRAVoltPlus12VLowerVoltage measured in the server has gone outside of +12V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.211NodehpnsaRATempWarningThe server temperature measured on the HP Remote Assistant Card has exceeded the configured warning threshold.
1.3.6.1.4.1.11.2.23.8.221NodehpnsaRATempShutdownThe server temperature measured on the HP Remote Assistant Card has exceeded the configured threshold and the server has been automatically shut down.
1.3.6.1.4.1.11.2.23.8.231NodehpnsaRATempCriticalThe server temperature measured on the HP Remote Assistant Card has exceeded the configured Graceful Shutdown threshold value by 5 degrees C and the server has…
1.3.6.1.4.1.11.2.23.8.401NodehpnsaRASuccessfulLoginAn administrator has logged in to the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.402NodehpnsaRAIllegalLoginAn unauthorized user has made 3 or more unsuccessful attempts to log in to the HP Remote Assistant Card within a 5-minute period of time.
1.3.6.1.4.1.11.2.23.8.403NodehpnsaRALowBatteryChargeThe HP Remote Assistant Card's battery charging circuit is bad.
1.3.6.1.4.1.11.2.23.8.404NodehpnsaRABoardShutDownThe HP Remote Assistant Card has been shut down.
1.3.6.1.4.1.11.2.23.8.405NodehpnsaRAAdminstratorLogoutAn administrator disconnected from the HP Remote Assistant board.
1.3.6.1.4.1.11.2.23.8.406NodehpnsaRAAdministratorAutologoutAn administrator has been automatically disconnected from the HP Remote Assistant board. The administrator was inactive for more than five minutes.
1.3.6.1.4.1.11.2.23.8.407NodehpnsaRAAdministratorConnectionLostAn administrator has been prematurely disconnected from the Remote Assistant board.
1.3.6.1.4.1.11.2.23.8.408NodehpnsaRAAdministratorDialbackFailedAn administrator failed to connect to the HP Remote Assistant board on a dialback
1.3.6.1.4.1.11.2.23.8.501NodehpnsaRAASRHangNOSASR has stopped notifying the HP Remote Assistant Card that the system is running correctly (the server probably hung or crashed).
1.3.6.1.4.1.11.2.23.8.502NodehpnsaRAASRServerRestartThe HP Remote Assistant card has restarted the server due to the NOS being hung.
1.3.6.1.4.1.11.2.23.8.503NodehpnsaRAASRTimerEnabledThe Automatic Server Restart software has been enabled by the Remote Assistant ASR timer.
1.3.6.1.4.1.11.2.23.8.504NodehpnsaRAASRTimerDisabledThe HP Remote Assistant Automatic Server Restart timer has been disabled.
1.3.6.1.4.1.11.2.23.8.601NodehpnsaRARemoteInitiatedCtrlAltDelAn administrator has executed a remote <Ctrl-Alt-Del> on the server via the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.602NodehpnsaRARemoteInitiatedResetAn administrator has executed a remote power cycle on the server via the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.603NodehpnsaRARemoteInitiatedPowerDownAn administrator has executed a remote power down of the server via the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.701NodehpnsaRAInitServerBIOSThe server's BIOS has successfully initialized the HP Remote Assistant Card during the boot process.
1.3.6.1.4.1.11.2.23.8.800NodehpnsaRABusUtilizationThe 5-minute average EISA bus utilization has exceeded the configured threshold.
1.3.6.1.4.1.11.2.23.8.900NodehpnsaRATestNotificationAn administrator has executed Test Page from the HP Remote Assistant Configuration Utility.
1.3.6.1.4.1.11.2.23.8.901NodehpnsaRATAPNoConnectThe HP Remote Assistant modem was unable to connect to the TAP paging service modem.
1.3.6.1.4.1.11.2.23.8.902NodehpnsaRATAPParam1ErrorHP Remote Assistant was unable to connect with the TAP paging service.
1.3.6.1.4.1.11.2.23.8.903NodehpnsaRATAPParam2ErrorHP Remote Assistant was unable to log on to the TAP paging service.
1.3.6.1.4.1.11.2.23.8.904NodehpnsaRATAPParam3ErrorThe HP Remote Assistant pager message was rejected by the TAP paging service.
1.3.6.1.4.1.11.2.23.4096NodehpnsaStorageCapWarningVolume Storage Capacity has exceeded the warning threshold level.
1.3.6.1.4.1.11.2.23.4097NodehpnsaStorageCapMinorVolume Storage Capacity has exceeded the minor threshold level.
1.3.6.1.4.1.11.2.23.4098NodehpnsaStorageCapMajorVolume Storage Capacity has exceeded the major threshold level.
1.3.6.1.4.1.11.2.23.4356NodehpnsaPostErrorPost Error has occurred.
1.3.6.1.4.1.11.2.23.8210NodehpnsaDiskSysDefectsThe Defect List Threshold has been exceeded.
1.3.6.1.4.1.11.2.23.8609NodehpnsaDaCacheErrorHPDA Controller: Cache Error
1.3.6.1.4.1.11.2.23.8625NodehpnsaDaLogicalDriveTrapHPDA Logical Drive: Critical
1.3.6.1.4.1.11.2.23.8626NodehpnsaDaLogicalDriveNotAvailableHPDA Logical Drive Not Available
1.3.6.1.4.1.11.2.23.8641NodehpnsaDaHotSpareFailureHPDA Hot Spare:Failed
1.3.6.1.4.1.11.2.23.8642NodehpnsaDaHotSpareSuccessHPDA Hot Spare Succeeded
1.3.6.1.4.1.11.2.23.8657NodehpnsaDaHardDiskFailureHPDA Hard Disk Failed
1.3.6.1.4.1.11.2.23.8673NodehpnsaDaParityThresholdTrapHPDA Threshold Exceeded: Parity
1.3.6.1.4.1.11.2.23.8674NodehpnsaDaSoftErrorThresholdTrapHPDA Threshold Exceeded: Soft Errors
1.3.6.1.4.1.11.2.23.8675NodehpnsaDaHardwareThresholdTrapHPDA Threshold Exceeded: Hardware Errors
1.3.6.1.4.1.11.2.23.8676NodehpnsaDaMiscThresholdTrapHPDA Threshold Exceeded: Miscellaneous Errors
1.3.6.1.4.1.11.2.23.8677NodehpnsaDaControllerTrapHPDA Controller: NVRAM Age
1.3.6.1.4.1.11.2.23.9101NodehpnsaRPSAbnormalConditionThe Redundant Power Supply module is not operating properly, but there is no power supply module hardware failure.
1.3.6.1.4.1.11.2.23.9103NodehpnsaRPSACPowerSourceFailureIndicates a failure with the AC power source that is connected to one of the redundant power supply units.
1.3.6.1.4.1.11.2.23.9105NodehpnsaRPSPsuFailureDetectedIndicates that one of the redundant power supply modules is not in normal operating condition.
1.3.6.1.4.1.11.2.23.9106NodehpnsaRPSDCShutdownIndicates that one of the redundant power supply modules is in over temperature protection mode.
1.3.6.1.4.1.11.2.23.9107NodehpnsaRPSPsuRemovedIndicates that one of the redundant power supply modules has been physically removed from the HP NetServer Power Supply Subsystem.
1.3.6.1.4.1.11.2.23.9108NodehpnsaRPSPsuInsertedIndicates that one of the redundant power supply modules has been physically inserted into the HP NetServer Power Supply Subsystem.
1.3.6.1.4.1.11.2.23.9109NodehpnsaRPSPowerRestoredIndicates that one of the redundant power supply modules in the HP NetServer has recovered from an over temperature protection mode.
1.3.6.1.4.1.11.2.23.9110NodehpnsaRPSWarningExceededIndicates that one of the redundant power supply modules in the HP NetServer has exceeded the warning temperature level.
1.3.6.1.4.1.11.2.23.9111NodehpnsaRPSEmergencyExceededIndicates that one of the redundant power supply modules in the HP NetServer has exceeded the emergency temperature level.
1.3.6.1.4.1.11.2.23.12288NodehpnsaTempMonitorErrorServer temperature monitor cannot read temperature data.
1.3.6.1.4.1.11.2.23.12289NodehpnsaTempTrapWarningServer temperature has exceeded the warning temperature threshold.
1.3.6.1.4.1.11.2.23.12290NodehpnsaTempTrapEmergencyServer temperature has exceeded the emergency temperature threshold.
1.3.6.1.4.1.11.2.23.16385NodehpnsaNicReceiveErrorsThe total number of packets with receive errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16386NodehpnsaNicTransmitErrorsThe total number of packets with transmit errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16387NodehpnsaNicAdapterResetThe total number of LAN Adapter reset errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16388NodehpnsaNicAlignmentErrorsThe total number of alignment and CRC errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16389NodehpnsaNicGiantFrameErrorsThe total number of giant frame packets has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16390NodehpnsaNicHardwareMismatchThe total number of packets with length less than the required minimum length has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16391NodehpnsaNicLateCollisionThe total number of late collision errors has exceeded the threshold (the network is too large).
1.3.6.1.4.1.11.2.23.16392NodehpnsaNicExcessiveCollisionThe total number of colliding packets has exceeded the threshold (the network is too busy).
1.3.6.1.4.1.11.2.23.16393NodehpnsaNicCarrierSenseErrorThe total number of carrier sense errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16394NodehpnsaNicDeferralErrorThe total number of adapter deferrals has exceeded the threshold (the network is forever busy).
1.3.6.1.4.1.11.2.23.16395NodehpnsaNicNoECBErrorThe total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16396NodehpnsaNicReceiveOverflowThe total number of Receive Overflow errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16397NodehpnsaNicUtilCountLAN adapter utilization count has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16398NodehpnsaNicAdapterMismatchThe LAN adapter which the alarms were configured for, has been replaced by another type of LAN adapter.
1.3.6.1.4.1.11.2.23.16399NodehpnsaNicTxFIFOUnderrunThere possibly is a dataflow problem with your HP LAN adapter.
1.3.6.1.4.1.11.2.23.16400NodehpnsaNicTxTimeOutThe HP LAN adapter driver did not receive a transmit complete interrupt.
1.3.6.1.4.1.11.2.23.16401NodehpnsaNicRxFIFOOverrunThere possibly is a dataflow problem with your HP LAN adapter.
1.3.6.1.4.1.11.2.23.16402NodehpnsaNicRxFalseInterruptsThere is a dataflow problem with your HP LAN adapter - receive interrupts are being generated, but no receive packets are being present.
1.3.6.1.4.1.11.2.23.16403NodehpnsaNicPagingErrorThere possibly is a problem with your HP LAN adapter - it generates too many buffer pointer errors.
1.3.6.1.4.1.11.2.23.16404NodehpnsaNicTimedOutDMAThere possibly is a problem with your HP LAN adapter - DMA timed out while transmitting or receiving a packet.
1.3.6.1.4.1.11.2.23.16405NodehpnsaNicTxNoResourcesThe HP LAN adapter is transmitting faster than the media can handle.
1.3.6.1.4.1.11.2.23.16406NodehpnsaNicTxExcessiveFragsThe number of buffer fragments has exceeded the maximum number allowed by the network protocol in your HP LAN adapter.
1.3.6.1.4.1.11.2.23.16407NodehpnsaNicRxLowThe total number of errors due to requests of an ECB being denied has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16408NodehpnsaNicRxEmptyThere possibly is a problem with your HP LAN adapter running in bus master mode.
1.3.6.1.4.1.11.2.23.20528NodehpnsaParityErrorParity error has been detected in parity memory
1.3.6.1.4.1.11.2.23.20544NodehpnsaBusTimeoutErrorOne of the bus masters caused a bus timeout
1.3.6.1.4.1.11.2.23.20560NodehpnsaIOChannelCheckI/0 channel check activated by device in EISA slot caused an error
1.3.6.1.4.1.11.2.23.20576NodehpnsaSoftwareNMISoftware NMI has been generated
1.3.6.1.4.1.11.2.23.20592NodehpnsaPostMemoryResizeMemory size has been adjusted during the Power-On-Self-Test during the last boot
1.3.6.1.4.1.11.2.23.20624NodehpnsaPciParityErrorParity error has occurred on a transfer to/from a device on one of the PCI buses
1.3.6.1.4.1.11.2.23.20640NodehpnsaPciSystemErrorSystem error has occurred in the PCI subsystem
1.3.6.1.4.1.11.2.23.20656NodehpnsaCPUFailureOne or more CPUs have failed. Detected by BIOS during POST
1.3.6.1.4.1.11.2.23.20672NodehpnsaFailsafeTimeoutTimeout of failsafe timer has occurred
1.3.6.1.4.1.11.2.23.20704NodehpnsaErrorLoggingDisabledError logging for a specific error has been disabled due to too many errors of that kind in a short time period
1.3.6.1.4.1.11.2.23.20736NodehpnsaSystemWarningAn event of warning severity has occurred in the system. For example, chassis door has been opened
1.3.6.1.4.1.11.2.23.20737NodehpnsaSystemCriticalAn event of critical severity has occurred in the system. For example, both system fans have failed
1.3.6.1.4.1.11.2.23.20738NodehpnsaVoltEmergencyFatal voltage threshold on one of the system voltage channels has been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI, +3.3V to CPU
1.3.6.1.4.1.11.2.23.20739NodehpnsaVoltWarningWarning voltage threshold on one of the system voltage channels has been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI, +3.3V to CPU
1.3.6.1.4.1.11.2.23.20752NodehpnsaASRServerRestartServer has been restarted after the system watchdog timer has timed out due to NOS being hung
1.3.6.1.4.1.11.2.23.20800NodehpnsaSystemReconfigEISA Configuration Utility has altered system configuration
1.3.6.1.4.1.11.2.23.24449NodehpnsaHotSwapTempMonitorErrorHot Swap Cage: Temperature monitor error occurred
1.3.6.1.4.1.11.2.23.24451NodehpnsaHotSwapTempWarningHot Swap Cage: Warning temperature exceeded
1.3.6.1.4.1.11.2.23.24452NodehpnsaHotSwapTempEmergencyHot Swap Cage: Emergency temperature exceeded!
1.3.6.1.4.1.11.2.23.24453NodehpnsaHotSwapPowerFailurePower connection failure in one of the devices in the hot swap cage
1.3.6.1.4.1.11.2.23.24454NodehpnsaHotSwapDeviceRemovedA device has been removed from the hot swap cage
1.3.6.1.4.1.11.2.23.24455NodehpnsaHotSwapDeviceInsertedA device has been inserted into the hot swap cage
1.3.6.1.4.1.16Nodehpnr
1.3.6.1.4.1.16.1NodehpNetRAID
1.3.6.1.4.1.16.1.1NodehpNetRaidMib
1.3.6.1.4.1.16.1.1.200NoderaidTraps
1.3.6.1.4.1.16.1.1.200.1001ScalarrtAdapterNumberread-onlymandatoryAdapter Number for which Trap is generated.
1.3.6.1.4.1.16.1.1.200.1002ScalarrtLogicalDriveNumberread-onlymandatoryLogical Drive Number for which Trap is generated.
1.3.6.1.4.1.16.1.1.200.1003ScalarrtChannelNumberread-onlymandatoryChannel Number on the Adapter for which Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1004ScalarrtTargetIDread-onlymandatoryDevice ID of the Physical Drive for which Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1005ScalarrtOldDriveStateread-onlymandatoryOld State of Logical/Physical Drive, when a State Change Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1006ScalarrtNewDriveStateread-onlymandatoryNew State of Logical/Physical Drive, when a State Change Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1007ScalarrtSenseKeyread-onlymandatoryCheck Condition Sense-Key reported by Physical Drive for which Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1008ScalarrtASCread-onlymandatoryCheck Condition Additional Sense Code (ASC) reported by Physical Drive for which Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1009ScalarrtASCQread-onlymandatoryCheck Condition Additional Sense Code Qualifier (ASCQ) reported by Physical Drive for which Trap is Generated.
1.3.6.1.4.1.16.1.1.200.1010ScalarrtDriveVendorread-onlymandatoryVendor Identification String from the SCSI Inquiry Data for the Drive.
1.3.6.1.4.1.16.1.1.200.9001NodertConfigUpdatedAdapter-%d: A New Configuration has been written.
1.3.6.1.4.1.16.1.1.200.9002NodertPhysicalDriveStateChangeAdapter-%d, Channel-%d, Target-%d: Drive State Changed from %s to %s.
1.3.6.1.4.1.16.1.1.200.9003NodertLogicalDriveStateChangeAdapter-%d, Logical Drive-%d: State Changed from %s to %s.
1.3.6.1.4.1.16.1.1.200.9004NodertInitializeStartedAdapter-%d, Logical Drive-%d: Initialization Started.
1.3.6.1.4.1.16.1.1.200.9005NodertInitializeCompletedAdapter-%d, Logical Drive-%d: Initialization Completed Successfully.
1.3.6.1.4.1.16.1.1.200.9006NodertInitializeAbortedAdapter-%d, Logical Drive-%d: Initialization Aborted by User.
1.3.6.1.4.1.16.1.1.200.9007NodertInitializeFailedAdapter-%d, Logical Drive-%d: Initialization Failed.
1.3.6.1.4.1.16.1.1.200.9008NodertCheckConsistencyStartedAdapter-%d, Logical Drive-%d: Check Consistency Started.
1.3.6.1.4.1.16.1.1.200.9009NodertCheckConsistencyCompletedAdapter-%d, Logical Drive-%d: Check Consistency Completed. No Inconsistencies Found.
1.3.6.1.4.1.16.1.1.200.9010NodertCheckConsistencyAbortedAdapter-%d, Logical Drive-%d: Check Consistency Aborted by User.
1.3.6.1.4.1.16.1.1.200.9011NodertConsistencyCorrectedAdapter-%d, Logical Drive-%d: Check Consistency Operation Completed. Inconsistencies have been Cured.
1.3.6.1.4.1.16.1.1.200.9012NodertCheckConsistencyFailedAdapter-%d, Logical Drive-%d: Check Consistency Failed.
1.3.6.1.4.1.16.1.1.200.9013NodertReconstructionStartedAdapter-%d, Logical Drive-%d: Reconstruction Started.
1.3.6.1.4.1.16.1.1.200.9014NodertReconstructionCompletedAdapter-%d, Logical Drive-%d: Reconstruction Completed Successfully.
1.3.6.1.4.1.16.1.1.200.9015NodertReconstructionFailedAdapter-%d, Logical Drive-%d: Reconstruction Failed.
1.3.6.1.4.1.16.1.1.200.9016NodertPredictiveFailuresFalseAdapter-%d, Channel-%d, Target-%d: Reported Failure Prediction Threshold Exceeded [FALSE]. Drive Identification String = %s Sense Key = 0x%x, ASC = 0x%x, ASCQ …
1.3.6.1.4.1.16.1.1.200.9017NodertPredictiveFailuresExceededAdapter-%d, Channel-%d, Target-%d: Reported Predictive Failure. Drive Identification String = %s Sense Key = 0x%x, ASC = 0x%x, ASCQ = 0x%x.
1.3.6.1.4.1.16.1.1.200.9018NodertCheckConditionStatusAdapter-%d, Channel-%d, Target-%d: Command Completed with Sense_Key-0x%x ASC-0x%x ASCQ-0x%x.
1.3.6.1.4.1.16.1.1.200.9019NodertNewDriveInsertedAdapter-%d, Channel-%d, Target-%d: New Device Inserted.
1.3.6.1.4.1.16.1.1.200.9020NodertBatteryMissingAdapter-%d: Battery Module is missing.
1.3.6.1.4.1.16.1.1.200.9021NodertBatteryVolatageLowAdapter-%d: Battery Module Voltage is Low.
1.3.6.1.4.1.16.1.1.200.9022NodertBatteryTemperatureHighAdapter-%d: Battery Module Temperature Exceeded Danger Threshold.
1.3.6.1.4.1.795Nodeadaptec
1.3.6.1.4.1.795.2Nodestoragemanagement
1.3.6.1.4.1.795.2.5Nodecyclone
1.3.6.1.4.1.795.2.5.101NodecycSNMPAgentIsUpSNMP Agent is up.
1.3.6.1.4.1.795.2.5.102NodecycSNMPAgentIsDownSNMP Agent is down.
1.3.6.1.4.1.795.2.5.107NodecycDuplicateHostAdapterCyclone: duplicate hostadapter ID
1.3.6.1.4.1.795.2.5.108NodecycHostAdapterDiscoveredThe HostAdapter# %d with HostAdapter Id %s and Manager Id %s is discovered
1.3.6.1.4.1.795.2.5.109NodecycHostAdapterChangedThe HostAdapter# %d has new HostAdapter Id %s and Manager Id %s
1.3.6.1.4.1.795.2.5.110NodecycHostAdapterFailedThe HostAdapter# %d has Failed
1.3.6.1.4.1.795.2.5.111NodecycHostAdapterRecoveredHost Adapter# %d recovered
1.3.6.1.4.1.795.2.5.112NodecycDeviceFailedThe HostAdapter# %d , TargetID %d, Lun# %d has failed
1.3.6.1.4.1.795.2.5.113NodecycDeviceDiscoveredThe HostAdapter# %d , TargetID %d, Lun# %d of vendor %s product %s has discovered
1.3.6.1.4.1.795.2.5.114NodecycDeviceRecoveredThe HostAdapter# %d , TargetID %d, Lun# %d has recovered
1.3.6.1.4.1.795.2.5.115NodecycDeviceChangedThe HostAdapter# %d , TargetID %d, Lun# %d has new Vendor %s and Product %s information
1.3.6.1.4.1.795.2.5.116NodecycPredictiveFailureThe HostAdapter# %d , TargetID %d, Lun# %d has Predictive Failure Condition on vendor %s product %s with sense info MSB(sense code), next 8 bits(sense code Qua…
1.3.6.1.4.1.795.2.5.117NodecycAspiDatabaseClearedThe Aspi database is cleared and therefore all the previous information are not available
1.3.6.1.4.1.795.2.5.118NodecycAspiCrashThe Aspi has crashed
1.3.6.1.4.1.795.2.5.119NodecycAspiNoMemoryNo memory left for Aspi Operations
1.3.6.1.4.1.795.2.5.120NodecycAspiFileWriteOpenErrorUnable to open Aspi file for writing, problem exists in server hard disk
1.3.6.1.4.1.795.2.5.121NodecycAspiFileWriteErrorUnable to open Aspi file , problem exists in server hard disk
1.3.6.1.4.1.795.2.5.122NodecycAspiNoDeviceFileAspi device file doesnot exist
1.3.6.1.4.1.795.2.5.123NodecycAspiNoMemoryReadingAspi: Memory allocation is failing
1.3.6.1.4.1.795.2.5.124NodecycAspiFileReadErrorAspi: unable to read the file server hard disk might have problems
1.3.6.1.4.1.795.2.5.125NodecycAspiBadFileMagicAspi: database is corrupted
1.3.6.1.4.1.795.2.5.9000NodecycTraps
1.3.6.1.4.1.795.2.5.9000.9001ScalarcycManagerIDread-onlymandatoryASCII String description of SCSI Manager
1.3.6.1.4.1.795.2.5.9000.9002ScalarcycHostAdapterIDread-onlymandatoryASCII String description of Hostadapter
1.3.6.1.4.1.795.2.5.9000.9003ScalarcycHostAdapterNumberread-onlymandatoryThe unique Hostadapter Number
1.3.6.1.4.1.795.2.5.9000.9004ScalarcycVendorread-onlymandatoryThis indicates the Name of the Vendor
1.3.6.1.4.1.795.2.5.9000.9005ScalarcycProductread-onlymandatoryThis indicates the product information
1.3.6.1.4.1.795.2.5.9000.9006ScalarcycControllerModelread-onlymandatoryThe model of the associated controller e.g ATHENA, VIKING etc
1.3.6.1.4.1.795.2.5.9000.9007ScalarcycBusNumberread-onlymandatoryThe PCI Bus number
1.3.6.1.4.1.795.2.5.9000.9008ScalarcycChannelNumberread-onlymandatoryChannel Number
1.3.6.1.4.1.795.2.5.9000.9009ScalarcycScsiTargetIDread-onlymandatorySCSI Target ID
1.3.6.1.4.1.795.2.5.9000.9010ScalarcycLunread-onlymandatoryThe LUN of the device ID
1.3.6.1.4.1.795.2.5.9000.9011ScalarcycArrayNameread-onlymandatoryArray name
1.3.6.1.4.1.795.2.5.9000.9012ScalarcycMisComparesread-onlymandatoryThe number of miscompares in verify
1.3.6.1.4.1.795.2.5.9000.9013ScalarcycDriverread-onlymandatoryThe Driver version
1.3.6.1.4.1.795.2.5.9000.9014ScalarcycManagerread-onlymandatoryThe CI/O Manager version
1.3.6.1.4.1.795.2.5.9000.9015ScalarcycOldArrayNameread-onlymandatoryOld Array name
1.3.6.1.4.1.795.2.5.9000.9016ScalarcycNewArrayNameread-onlymandatoryChanged Array name
1.3.6.1.4.1.795.2.5.9000.9017ScalarcycPriorityread-onlymandatoryThe Priority of the operation
1.3.6.1.4.1.795.2.5.9000.9018ScalarcycSenseInforead-onlymandatoryThe sense info of the PFA
1.3.6.1.4.1.795.4NodeadaptecNm
1.3.6.1.4.1.795.4.1NodeadaptecNmScsiStatus
1.3.6.1.4.1.795.4.1.8193NodehpnsaScsiStatusCorruptedDBDevice Database has been corrupted.
1.3.6.1.4.1.795.4.1.8194NodehpnsaScsiStatusUnloadedNLMSCSI Status agent was unloaded from a NetWare Server.
1.3.6.1.4.1.795.4.1.8196NodehpnsaScsiStatusFailedHBAOne of the SCSI HBAs can no longer be detected by the SCSI Status agent.
1.3.6.1.4.1.795.4.1.8197NodehpnsaScsiStatusRecoveredHBAA Host Adapter which has failed, has become accessible again.
1.3.6.1.4.1.795.4.1.8198NodehpnsaScsiStatusDiscoveredHBAA new SCSI Host Bus Adapter has been discovered or device database has been cleared.
1.3.6.1.4.1.795.4.1.8199NodehpnsaScsiStatusDeviceFailedOne of the SCSI devices installed on the server can no longer be detected by the SCSI Status agent.
1.3.6.1.4.1.795.4.1.8200NodehpnsaScsiStatusDeviceRecoveredA SCSI device which has failed, has become accessible again.
1.3.6.1.4.1.795.4.1.8201NodehpnsaScsiStatusDeviceDiscoveredA new SCSI device has been discovered.
1.3.6.1.4.1.795.4.1.8205NodehpnsaScsiStatusChangedHBAThe SCSI Status agent detected that the Host Bus Adapter has been changed.
1.3.6.1.4.1.795.4.1.8206NodehpnsaScsiStatusDeviceChangedThe SCSI Status agent detected that a SCSI device installed on the server has been changed.
1.3.6.1.4.1.795.4.1.8208NodehpnsaScsiStatusTimeoutHBAThe SCSI Status agent sent a request to an HBA and the request never completed.
1.3.6.1.4.1.795.4.1.8209NodehpnsaScsiStatusDeviceTimeoutThe SCSI Status agent sent a request to a SCSI device and the request never completed.
MIB Viewer