MIB Viewer

HPOTHERTRAP-MIB

424 objects
No module-level DESCRIPTION found.
Imported Objects
RFC-1215TRAP-TYPE
RFC1155-SMIenterprises
OIDNameAccessStatusDescription
1.3.6.1.4.1.11Nodehp
1.3.6.1.4.1.11.2Nodenm
1.3.6.1.4.1.11.2.23Nodehpnsa
1.3.6.1.4.1.11.2.23.6NodehpnsaECC
1.3.6.1.4.1.11.2.23.6.4360NodehPECCMemory11ECC error corrected in memory module
1.3.6.1.4.1.11.2.23.6.4361NodehPECCMemory12Uncorrectable multi-bit ECC error has occurred in memory module
1.3.6.1.4.1.11.2.23.6.4363NodehPECCMemory13Repeated ECC error corrected in memory module
1.3.6.1.4.1.11.2.23.6.4364NodehPECCMemory14ECC memory module is operating outside of acceptable margins
1.3.6.1.4.1.11.2.23.6.4365NodehPECCMemory15Memory Mirroring switched to Slave Set
1.3.6.1.4.1.11.2.23.6.4366NodehPECCMemory16Faulty row switched to Hot Spare row
1.3.6.1.4.1.11.2.23.6.24353NodehPECCMemory2A single-bit error has been corrected in one of the memory modules.
1.3.6.1.4.1.11.2.23.6.24354NodehPECCMemory3Predictive failure in a memory module
1.3.6.1.4.1.11.2.23.6.24357NodehPECCMemory7A Multiple-bit error has occurred in one of the memory modules
1.3.6.1.4.1.11.2.23.6.24359NodehPECCMemory9Single-bit repeated error
1.3.6.1.4.1.11.2.23.8NodehpnsaRemoteAssist
1.3.6.1.4.1.11.2.23.8.109NoderAVoltage1The server has lost the power completely.
1.3.6.1.4.1.11.2.23.8.111NoderAVoltage2Voltage measured in the server has gone outside of -12V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.113NoderAVoltage3Voltage measured in the server has gone outside of +3.3V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.114NoderAVoltage4Voltage measured in the server has gone outside of +5V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.115NoderAVoltage5Voltage measured in the server has gone outside of +12V Upper Threshold.
1.3.6.1.4.1.11.2.23.8.121NoderAVoltage6Voltage measured in the server has gone outside of -12V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.122NoderAVoltage10The HP Remote Assistant Card's battery charging circuit is bad.
1.3.6.1.4.1.11.2.23.8.123NoderAVoltage7Voltage measured in the server has gone outside of +3.3V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.124NoderAVoltage8Voltage measured in the server has gone outside of +5V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.125NoderAVoltage9Voltage measured in the server has gone outside of +12V Lower Threshold.
1.3.6.1.4.1.11.2.23.8.211NoderATemp1The server temperature measured on the HP Remote Assistant Card has exceeded the configured warning threshold.
1.3.6.1.4.1.11.2.23.8.221NoderATemp2The server temperature measured on the HP Remote Assistant Card has exceeded the configured threshold and the server has been automatically shut down.
1.3.6.1.4.1.11.2.23.8.231NoderATemp4The server temperature measured on the HP Remote Assistant Card has exceeded the configured Graceful Shutdown threshold value by 5 degrees C and the server has…
1.3.6.1.4.1.11.2.23.8.401NoderAOther1An administrator has logged in to the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.402NoderAOther3An unauthorized user has made 3 or more unsuccessful attempts to log in to the HP Remote Assistant Card within a 5-minute period of time.
1.3.6.1.4.1.11.2.23.8.403NoderAOther5The HP Remote Assistant Card's battery charging circuit is bad.
1.3.6.1.4.1.11.2.23.8.404NoderAOther6The HP Remote Assistant Card has been shut down.
1.3.6.1.4.1.11.2.23.8.405NoderAOther20A remote user disconnected from the HP RA or Remote Control card.
1.3.6.1.4.1.11.2.23.8.406NoderAOther21An administrator has been automatically disconnected from the HP Remote Assistant board. The administrator was inactive for more than five minutes.
1.3.6.1.4.1.11.2.23.8.407NoderAOther23An administrator has been prematurely disconnected from the Remote Assistant board.
1.3.6.1.4.1.11.2.23.8.408NoderAOther25An administrator failed to connect to the HP Remote Assistant board on a dialback
1.3.6.1.4.1.11.2.23.8.501NoderAASR1ASR has stopped notifying the HP Remote Assistant Card that the system is running correctly (the server probably hung or crashed).
1.3.6.1.4.1.11.2.23.8.502NoderAASR2The HP Remote Assistant card has restarted the server due to the NOS being hung.
1.3.6.1.4.1.11.2.23.8.503NoderAASR3The Automatic Server Restart software has been enabled by the Remote Assistant ASR timer.
1.3.6.1.4.1.11.2.23.8.504NoderAASR4The HP Remote Assistant Automatic Server Restart timer has been disabled.
1.3.6.1.4.1.11.2.23.8.601NoderAOther7An administrator has executed a remote <Ctrl-Alt-Del> on the server via the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.602NoderAOther9An administrator has executed a remote power cycle on the server via the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.603NoderAOther12An administrator has executed a remote power down of the server via the HP Remote Assistant Card.
1.3.6.1.4.1.11.2.23.8.701NoderAOther18The server's BIOS has successfully initialized the HP Remote Assistant Card during the boot process.
1.3.6.1.4.1.11.2.23.8.800NoderABusUsage1The 5-minute average EISA bus utilization has exceeded the configured threshold.
1.3.6.1.4.1.11.2.23.8.900NoderAOther19An administrator has executed Test Page from the HP Remote Assistant Configuration Utility.
1.3.6.1.4.1.11.2.23.8.901NoderAOther29The HP Remote Assistant modem was unable to connect to the TAP paging service modem.
1.3.6.1.4.1.11.2.23.8.902NoderAOther31HP Remote Assistant was unable to connect with the TAP paging service.
1.3.6.1.4.1.11.2.23.8.903NoderAOther32HP Remote Assistant was unable to log on to the TAP paging service.
1.3.6.1.4.1.11.2.23.8.904NoderAOther35The HP Remote Assistant pager message was rejected
1.3.6.1.4.1.11.2.23.8.1602NoderAOther10A remote user has executed a remote power cycle on the server via the HP RA or Remote Control.
1.3.6.1.4.1.11.2.23.8.1603NoderAOther13A remote user has executed a remote power down of the server via the HP RA or Remote Control card.
1.3.6.1.4.1.11.2.23.8.2221NoderATemp3The server temperature or voltage levels measured by the remote management hardware has exceeded the configured threshold. The server has been automatically sh…
1.3.6.1.4.1.11.2.23.8.2401NoderAOther2A remote user has logged in to the HP RA or Remote Control card.
1.3.6.1.4.1.11.2.23.8.2402NoderAOther4An unauthorized user has made 3 or more unsuccessful attempts to log in to the HP RA or Remote Control card.
1.3.6.1.4.1.11.2.23.8.2406NoderAOther22A remote user has been automatically disconnected from the HP RA or Remote Control card, because of inactivity.
1.3.6.1.4.1.11.2.23.8.2407NoderAOther24A remote user has been prematurely disconnected from the HP RA or Remote Control card.
1.3.6.1.4.1.11.2.23.8.2408NoderAOther26A remote user failed to connect to the HP RA or Remote Control on a dialback
1.3.6.1.4.1.11.2.23.8.2601NoderAOther8An administrator has executed a remote <Ctrl-Alt-Del> on the server via the HP RA or Remote Control card.
1.3.6.1.4.1.11.2.23.8.2604NoderAOther17A remote user has executed a remote graceful shutdown of the server via the HP RA or Remote Control card.
1.3.6.1.4.1.11.2.23.8.2901NoderAOther30The HP RA or Remote Control modem was unable to connect to the TAP paging service modem.
1.3.6.1.4.1.11.2.23.8.2902NoderAOther33The HP RA or Remote Control was unable to connect to the TAP paging service.
1.3.6.1.4.1.11.2.23.8.2903NoderAOther34The HP RA or Remote Control was unable to log on to the TAP paging service.
1.3.6.1.4.1.11.2.23.8.2904NoderAOther36The HP RA or Remote Control pager message was rejected by the TAP paging service.
1.3.6.1.4.1.11.2.23.8.2905NoderAOther37The HP RA or Remote Control email notification message was not sent correctly.
1.3.6.1.4.1.11.2.23.8.2906NoderAOther38A modem error has been detected on the remote management card.
1.3.6.1.4.1.11.2.23.8.2907NoderAOther39TopTools Remote Control Card memory test started
1.3.6.1.4.1.11.2.23.8.2908NoderAOther40TopTools Remote Control Card memory test completed
1.3.6.1.4.1.11.2.23.8.2909NoderAOther41TopTools Remote Control Card memory test stopped by user
1.3.6.1.4.1.11.2.23.8.2910NoderAOther42TopTools Remote Control Card memory test error
1.3.6.1.4.1.11.2.23.8.2911NoderAOther43TopTools Remote Control Card started
1.3.6.1.4.1.11.2.23.8.2912NoderAOther44TopTools Remote Control Card detects a serious internal error that prevents normal operation of the card
1.3.6.1.4.1.11.2.23.8.2913NoderAOther45The firmware on the TopTools Remote Control has been updated
1.3.6.1.4.1.11.2.23.8.2914NoderAOther46The TopTools Remote Control backup battery has discharged to a level where it will not be able to power the card
1.3.6.1.4.1.11.2.23.8.2915NoderAOther47The battery on the TopTools Remote Control card is disconnected
1.3.6.1.4.1.11.2.23.8.2916NoderAOther48Remote Control Card: DHCP has assigned a new IP address
1.3.6.1.4.1.11.2.23.8.3408NoderAOther27Integrated RA configuration reset to defaults
1.3.6.1.4.1.11.2.23.8.3602NoderAOther11A remote user has executed a remote hard reset on the server via the HP RA or Remote Control.
1.3.6.1.4.1.11.2.23.8.3603NoderAOther14A remote user has executed a remote power up of the server via the HP RA or Remote Control card.
1.3.6.1.4.1.11.2.23.8.4408NoderAOther28TopTools Remote Control card configuration was corrupted and has been restored to default settings.
1.3.6.1.4.1.11.2.23.8.4603NoderAOther15Automatic power shutdown due to critical condition.
1.3.6.1.4.1.11.2.23.8.5603NoderAOther16Front panel power down.
1.3.6.1.4.1.11.2.23.101NodehPFWUpdate1Front Panel Controller firmware updated
1.3.6.1.4.1.11.2.23.102NodehPFWUpdate2Primary Hot Swap Cage Controller firmware updated
1.3.6.1.4.1.11.2.23.103NodehPFWUpdate3Secondary Hot Swap Cage Controller firmware updated
1.3.6.1.4.1.11.2.23.104NodehPFWUpdate4NetServer Management Controller firmware updated
1.3.6.1.4.1.11.2.23.105NodehPFWUpdate5CPU Management Controller firmware updated
1.3.6.1.4.1.11.2.23.4096NodestorageCap1Volume Storage Capacity has exceeded the warning threshold level.
1.3.6.1.4.1.11.2.23.4097NodestorageCap3Volume Storage Capacity has exceeded the minor threshold level.
1.3.6.1.4.1.11.2.23.4098NodestorageCap5Volume Storage Capacity has exceeded the major threshold level.
1.3.6.1.4.1.11.2.23.4356NodesystemHW1Post Error has occurred.
1.3.6.1.4.1.11.2.23.8210NodehPDiskSystem1The Defect List Threshold has been exceeded.
1.3.6.1.4.1.11.2.23.8609NodehPRaid1HPDA Controller: Cache Error
1.3.6.1.4.1.11.2.23.8625NodehPRaid3HPDA Logical Drive: Critical
1.3.6.1.4.1.11.2.23.8626NodehPRaid4HPDA Logical Drive Not Available
1.3.6.1.4.1.11.2.23.8641NodehPRaid5HPDA Hot Spare:Failed
1.3.6.1.4.1.11.2.23.8642NodehPRaid7HPDA Hot Spare Succeeded
1.3.6.1.4.1.11.2.23.8657NodehPRaid8HPDA Hard Disk Failed
1.3.6.1.4.1.11.2.23.8673NodehPRaid10HPDA Threshold Exceeded: Parity
1.3.6.1.4.1.11.2.23.8674NodehPRaid12HPDA Threshold Exceeded: Soft Errors
1.3.6.1.4.1.11.2.23.8675NodehPRaid14HPDA Threshold Exceeded: Hardware Errors
1.3.6.1.4.1.11.2.23.8676NodehPRaid16HPDA Threshold Exceeded: Miscellaneous Errors
1.3.6.1.4.1.11.2.23.8677NodehPRaid18HPDA Controller: NVRAM Age
1.3.6.1.4.1.11.2.23.9101NoderedundantPower1The Redundant Power Supply module is not operating properly, but there is no power supply module hardware failure.
1.3.6.1.4.1.11.2.23.9103NoderedundantPower2Indicates a failure with the AC power source that is connected to one of the redundant power supply units.
1.3.6.1.4.1.11.2.23.9105NoderedundantPower4Indicates that one of the redundant power supply modules is not in normal operating condition.
1.3.6.1.4.1.11.2.23.9106NoderedundantPower5Indicates that one of the redundant power supply modules is in over temperature protection mode.
1.3.6.1.4.1.11.2.23.9107NoderedundantPower7Indicates that one of the redundant power supply modules has been physically removed from the HP NetServer Power Supply Subsystem.
1.3.6.1.4.1.11.2.23.9108NoderedundantPower8Indicates that one of the redundant power supply modules has been physically inserted into the HP NetServer Power Supply Subsystem.
1.3.6.1.4.1.11.2.23.9109NoderedundantPower9Indicates that one of the redundant power supply modules in the HP NetServer has recovered from an over temperature protection mode.
1.3.6.1.4.1.11.2.23.9110NoderedundantPower11Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the warning temperature level.
1.3.6.1.4.1.11.2.23.9111NoderedundantPower13Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the emergency temperature level.
1.3.6.1.4.1.11.2.23.9112NoderedundantPower14Power System failure A/C Lost
1.3.6.1.4.1.11.2.23.9113NoderedundantPower15The Power Supply Subsystem has fewer than the required number of Power Supply Units installed for normal operation or is having problems powering up or down.
1.3.6.1.4.1.11.2.23.9114NoderedundantPower37Power Supply Subsystem soft failure
1.3.6.1.4.1.11.2.23.12288Nodetemperature1Server temperature monitor cannot read temperature data.
1.3.6.1.4.1.11.2.23.12289Nodetemperature2Server temperature has exceeded the warning temperature threshold.
1.3.6.1.4.1.11.2.23.12290Nodetemperature3Server temperature has exceeded the emergency temperature threshold.
1.3.6.1.4.1.11.2.23.16385NodenetworkCard1The total number of packets with receive errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16386NodenetworkCard5The total number of packets with transmit errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16387NodenetworkCard9The total number of LAN Adapter reset errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16388NodenetworkCard13The total number of alignment and CRC errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16389NodenetworkCard17The total number of giant frame packets has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16390NodenetworkCard21The total number of packets with length less than the required minimum length has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16391NodenetworkCard25The total number of late collision errors has exceeded the threshold (the network is too large).
1.3.6.1.4.1.11.2.23.16392NodenetworkCard29The total number of colliding packets has exceeded the threshold (the network is too busy).
1.3.6.1.4.1.11.2.23.16393NodenetworkCard33The total number of carrier sense errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16394NodenetworkCard37The total number of adapter deferrals has exceeded the threshold (the network is forever busy).
1.3.6.1.4.1.11.2.23.16395NodenetworkCard41The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16396NodenetworkCard45The total number of Receive Overflow errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16397NodenetworkCard49LAN adapter utilization count has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16398NodenetworkCard53The LAN adapter which the alarms were configured for, has been replaced by another type of LAN adapter.
1.3.6.1.4.1.11.2.23.16399NodenetworkCard55There possibly is a dataflow problem with your HP LAN adapter.
1.3.6.1.4.1.11.2.23.16400NodenetworkCard56The HP LAN adapter driver did not receive a transmit complete interrupt.
1.3.6.1.4.1.11.2.23.16401NodenetworkCard57There possibly is a dataflow problem with your HP LAN adapter.
1.3.6.1.4.1.11.2.23.16402NodenetworkCard58There is a dataflow problem with your HP LAN adapter - receive interrupts are being generated, but no receive packets are being present.
1.3.6.1.4.1.11.2.23.16403NodenetworkCard59There possibly is a problem with your HP LAN adapter - it generates too many buffer pointer errors.
1.3.6.1.4.1.11.2.23.16404NodenetworkCard60There possibly is a problem with your HP LAN adapter - DMA timed out while transmitting or receiving a packet.
1.3.6.1.4.1.11.2.23.16405NodenetworkCard61The HP LAN adapter is transmitting faster than the media can handle.
1.3.6.1.4.1.11.2.23.16406NodenetworkCard62The number of buffer fragments has exceeded the maximum number allowed by the network protocol in your HP LAN adapter.
1.3.6.1.4.1.11.2.23.16407NodenetworkCard63The total number of errors due to requests of an ECB being denied has exceeded the threshold.
1.3.6.1.4.1.11.2.23.16408NodenetworkCard64There possibly is a problem with your HP LAN adapter running in bus master mode.
1.3.6.1.4.1.11.2.23.16418NodenetworkCard65The active NIC in a redundant group has failed. The standby NIC has taken over.
1.3.6.1.4.1.11.2.23.16419NodenetworkCard67A previously failed NIC in a redundant group has become operational.
1.3.6.1.4.1.11.2.23.16420NodenetworkCard69The standby NIC in a redundant group has failed.
1.3.6.1.4.1.11.2.23.16421NodenetworkCard71All NICs (active and standby) in a redundant group have failed.
1.3.6.1.4.1.11.2.23.20528NodesystemHW6Parity error has been detected in parity memory
1.3.6.1.4.1.11.2.23.20544NodesystemHW8One of the bus masters caused a bus timeout
1.3.6.1.4.1.11.2.23.20545NodesystemHW7IPMB Protocol Error
1.3.6.1.4.1.11.2.23.20546NodesystemHW73NOS memory dump initiated
1.3.6.1.4.1.11.2.23.20560NodesystemHW9I/0 channel check activated by device in EISA slot caused an error
1.3.6.1.4.1.11.2.23.20576NodesystemHW11Software NMI has been generated
1.3.6.1.4.1.11.2.23.20577NodesystemHW12Uncorrectable Bus Error
1.3.6.1.4.1.11.2.23.20578NodesystemHW64Cache Protocol and Parity error
1.3.6.1.4.1.11.2.23.20579NodesystemHW65Correctable data error
1.3.6.1.4.1.11.2.23.20592NodesystemHW13Memory size has been adjusted during the Power-On-Self-Test during the last boot
1.3.6.1.4.1.11.2.23.20624NodesystemHW14Parity error has occurred on a transfer to/from a device on one of the PCI buses
1.3.6.1.4.1.11.2.23.20640NodesystemHW16System error has occurred in the PCI subsystem
1.3.6.1.4.1.11.2.23.20656NodesystemHW21Processor or Terminator (#) not detected
1.3.6.1.4.1.11.2.23.20657NodesystemHW18An uncorrectable Processor problem was detected.
1.3.6.1.4.1.11.2.23.20658NodesystemHW19Processor (#) Disabled
1.3.6.1.4.1.11.2.23.20659NodesystemHW59The CPU processor module is currently functioning properly, but it is no longer operating within acceptable margins
1.3.6.1.4.1.11.2.23.20660NodesystemHW20Processor or Terminator Card Not Detected
1.3.6.1.4.1.11.2.23.20661NodesystemHW22Processor Internal Error
1.3.6.1.4.1.11.2.23.20662NodesystemHW23Processor Thermal Trip Failure
1.3.6.1.4.1.11.2.23.20663NodesystemHW24Processor failed internal self test
1.3.6.1.4.1.11.2.23.20664NodesystemHW25Processor hung during POST
1.3.6.1.4.1.11.2.23.20665NodesystemHW26Processor startup/initialization failed
1.3.6.1.4.1.11.2.23.20666NodesystemHW60PCI Hot Plug fault deasserted
1.3.6.1.4.1.11.2.23.20667NodesystemHW61PCI Hot Plug Powered On
1.3.6.1.4.1.11.2.23.20668NodesystemHW62PCI Hot Plug fault asserted
1.3.6.1.4.1.11.2.23.20669NodesystemHW63PCI Hot Plug Powered off
1.3.6.1.4.1.11.2.23.20670NodesystemHW27Multiple Fan Failure
1.3.6.1.4.1.11.2.23.20671NodesystemHW79Configuration error in a processor slot
1.3.6.1.4.1.11.2.23.20672NodesystemHW28Timeout of failsafe timer has occurred
1.3.6.1.4.1.11.2.23.20673NodesystemHW81sCPU thermal trip
1.3.6.1.4.1.11.2.23.20674NodesystemHW82sCPU hot warning
1.3.6.1.4.1.11.2.23.20675NodesystemHW80sCPU internal error
1.3.6.1.4.1.11.2.23.20676NodesystemHW83CPU mismatch
1.3.6.1.4.1.11.2.23.20680NodesystemHW58Front Panel Button Violation
1.3.6.1.4.1.11.2.23.20704NodesystemHW29Error logging for a specific error has been disabled due to too many errors of that kind in a short time period
1.3.6.1.4.1.11.2.23.20736NodesystemHW43An event of warning severity has occurred in the system. For example, chassis door has been opened
1.3.6.1.4.1.11.2.23.20737NodesystemHW44An event of critical severity has occurred in the system. For example, both system fans have failed
1.3.6.1.4.1.11.2.23.20738Nodevoltage2Fatal voltage threshold on one of the system voltage sensors has been exceeded. Voltage sensors are +12V, +5V, -12V, +3.3V to PCI, +3.3V to Processor
1.3.6.1.4.1.11.2.23.20739Nodevoltage1Warning voltage threshold on one of the system voltage channels has been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI, +3.3V to Processor
1.3.6.1.4.1.11.2.23.20740NodesystemHW10Voltage utilization warning
1.3.6.1.4.1.11.2.23.20741NodesystemHW11sVoltage utilization error
1.3.6.1.4.1.11.2.23.20752NodeaSR1Server has been restarted after the system watchdog timer has timed out due to NOS being hung
1.3.6.1.4.1.11.2.23.20753NodeaSR2OS Watchdog Shutdown
1.3.6.1.4.1.11.2.23.20754NodeaSR3OS Watchdog poweroff
1.3.6.1.4.1.11.2.23.20755NodesystemFW3OS Boot Complete
1.3.6.1.4.1.11.2.23.20756NodesystemFW2System Firmware Boot Start
1.3.6.1.4.1.11.2.23.20757NodesystemFW4Machine Check Initiated
1.3.6.1.4.1.11.2.23.20758NodesystemFW1Generic trap for Critical or Fatal type E0 event from system firmware
1.3.6.1.4.1.11.2.23.20759NodefibreChannel5The Fibre Channel Adapter is Online
1.3.6.1.4.1.11.2.23.20760NodefibreChannel6The Fibre Channel Adapter is Offline
1.3.6.1.4.1.11.2.23.20800NodesystemHW30EISA Configuration Utility has altered system configuration
1.3.6.1.4.1.11.2.23.20832NodesystemHW48The hardware eventlog has been cleared.
1.3.6.1.4.1.11.2.23.20833NodesystemHW49An unrecognized HW log event was detected.
1.3.6.1.4.1.11.2.23.20848NodesystemHW50The system has been rebooted.
1.3.6.1.4.1.11.2.23.22528NodesystemHW51The Processor in the indicated slot has been disabled by the BIOS.
1.3.6.1.4.1.11.2.23.22544NodesystemHW57A single or multiple ECC Error has been detected on the P6 bus.
1.3.6.1.4.1.11.2.23.22576NodehPFan7One of the fans in the Processor/PCI fan tray stopped.
1.3.6.1.4.1.11.2.23.22593NodehPFan8Two or more of the fans in the Processor/PCI Fan Tray have stopped or have been removed.
1.3.6.1.4.1.11.2.23.22608NodehPFan9Fan problem in Processor/PCI Fan Tray has been corrected.
1.3.6.1.4.1.11.2.23.22624NodeaSR8The System has been reset by the microcontroller firmware because watchdog timer expired.
1.3.6.1.4.1.11.2.23.22640NodehPFan10One of the fans in the Memory Fan Tray stopped.
1.3.6.1.4.1.11.2.23.22651NodesystemHW52A user has halted the system with the NMI switch on the front panel.
1.3.6.1.4.1.11.2.23.22657NodehPFan11Two or more of the fans in the Memory Fan Tray have stopped or been removed.
1.3.6.1.4.1.11.2.23.22672NodehPFan12Fan problem in the Memory Fan Tray has been corrected.
1.3.6.1.4.1.11.2.23.22688NodesystemHW53Previously disabled Processor has been reinstalled.
1.3.6.1.4.1.11.2.23.22705NoderedundantPower16Temperature alert on designated Power Supply.
1.3.6.1.4.1.11.2.23.22706NoderedundantPower18Fan failure on designated Power Supply.
1.3.6.1.4.1.11.2.23.22707NoderedundantPower20Voltage error on designated Power Supply.
1.3.6.1.4.1.11.2.23.22708NoderedundantPower21Fan speed-up on designated Power Supply.
1.3.6.1.4.1.11.2.23.22709NoderedundantPower23A power supply's 3.3 volt supply has gone bad
1.3.6.1.4.1.11.2.23.22710NoderedundantPower24A power supply's 5 volt supply has gone bad
1.3.6.1.4.1.11.2.23.22711NoderedundantPower25A power supply's 12 volt supply has gone bad
1.3.6.1.4.1.11.2.23.22712NoderedundantPower26A power supply's -12 volt supply has gone bad
1.3.6.1.4.1.11.2.23.22720NoderedundantPower27Indicated Power Supply has been removed or is not connected properly.
1.3.6.1.4.1.11.2.23.22736NoderedundantPower28The indicated Power Supply has been inserted.
1.3.6.1.4.1.11.2.23.22752NodesystemHW54The system has been reset because Control Board detected a critical error.
1.3.6.1.4.1.11.2.23.22768NodesystemHW55The system has been power-cycled because Control Board detected a critical error.
1.3.6.1.4.1.11.2.23.22785NodesystemHW56The Processor Card is missing or not properly terminated in indicated processor module.
1.3.6.1.4.1.11.2.23.22801NodehPEnvironment7Voltage Regulating Module (VRM) on the indicated processor module had failed.
1.3.6.1.4.1.11.2.23.24096NodestorageCap2Volume Storage Capacity has exceeded the warning threshold level.
1.3.6.1.4.1.11.2.23.24097NodestorageCap4Volume Storage Capacity has exceeded the minor threshold level.
1.3.6.1.4.1.11.2.23.24098NodestorageCap6Volume Storage Capacity has exceeded the major threshold level.
1.3.6.1.4.1.11.2.23.24356NodesystemHW2Post Error has occurred.
1.3.6.1.4.1.11.2.23.24358NodesystemHW3Post Error has occurred.
1.3.6.1.4.1.11.2.23.24449Nodetemperature4Hot Swap Cage : Temperature monitor error occurred
1.3.6.1.4.1.11.2.23.24451Nodetemperature5Hot Swap Cage : Warning temperature exceeded
1.3.6.1.4.1.11.2.23.24452Nodetemperature6Hot Swap Cage : Emergency temperature exceeded!
1.3.6.1.4.1.11.2.23.24453NodesystemHW32Power connection failure in one of the devices in the hot swap cage
1.3.6.1.4.1.11.2.23.24454NodesystemHW34A device has been removed from the hot swap cage
1.3.6.1.4.1.11.2.23.24455NodesystemHW35A device has been inserted into the hot swap cage
1.3.6.1.4.1.11.2.23.24456NodesystemHW45Event log is getting full.
1.3.6.1.4.1.11.2.23.25000NodehPEnvironment1One of the voltage sensors crossed its lower non-critical threshold.
1.3.6.1.4.1.11.2.23.25001NodehPEnvironment2One of the voltage sensors crossed its lower critical threshold.
1.3.6.1.4.1.11.2.23.25002NodehPEnvironment3One of the voltage sensors crossed its lower non-recoverable threshold.
1.3.6.1.4.1.11.2.23.25003NodehPEnvironment4One of the voltage sensors crossed its upper non-critical threshold.
1.3.6.1.4.1.11.2.23.25004NodehPEnvironment5One of the voltage sensors crossed its upper critical threshold.
1.3.6.1.4.1.11.2.23.25005NodehPEnvironment6One of the voltage sensors crossed its upper non-recoverable threshold.
1.3.6.1.4.1.11.2.23.25006NodesystemHW7sVRM failure
1.3.6.1.4.1.11.2.23.25007NodehPTemperature1One of the temperature sensors crossed its lower non-critical threshold.
1.3.6.1.4.1.11.2.23.25008NodehPTemperature2One of the temperature sensors crossed its lower critical threshold.
1.3.6.1.4.1.11.2.23.25009NodehPTemperature3One of the temperature sensors crossed its lower non-recoverable threshold.
1.3.6.1.4.1.11.2.23.25010NodehPTemperature4One of the temperature sensors crossed its upper non-critical threshold.
1.3.6.1.4.1.11.2.23.25011NodehPTemperature5One of the temperature sensors crossed its upper critical threshold.
1.3.6.1.4.1.11.2.23.25012NodehPTemperature6One of the temperature sensors crossed its upper non-recoverable threshold.
1.3.6.1.4.1.11.2.23.25013NodehPFan1One of the fan sensors crossed its lower non-critical threshold.
1.3.6.1.4.1.11.2.23.25014NodehPFan2One of the fan sensors crossed its lower critical threshold.
1.3.6.1.4.1.11.2.23.25015NodehPFan3One of the fan sensors crossed its lower non-recoverable threshold.
1.3.6.1.4.1.11.2.23.25016NodehPFan4One of the fan sensors crossed its upper non-critical threshold.
1.3.6.1.4.1.11.2.23.25017NodehPFan5One of the fan sensors crossed its upper critical threshold.
1.3.6.1.4.1.11.2.23.25018NodehPFan6One of the fan sensors crossed its upper non-recoverable threshold.
1.3.6.1.4.1.11.2.23.25019NodehPChassis1The chassis has been opened.
1.3.6.1.4.1.11.2.23.25020NodehPChassis2I/O area open
1.3.6.1.4.1.11.2.23.25021NodehPChassis3Processor area open
1.3.6.1.4.1.11.2.23.25022NodesystemHW80Battery cycles have gone beyond the upper non-critical range
1.3.6.1.4.1.11.2.23.25023NodesystemHW81Battery cycles have gone beyond the upper critical range
1.3.6.1.4.1.11.2.23.25024NodesystemHW82Battery cycles have gone beyond the upper non-recoverable range
1.3.6.1.4.1.11.2.23.25025NodehPFan13A system fan module error has occurred
1.3.6.1.4.1.11.2.23.25026NodehPFan14A system fan module error has occurred
1.3.6.1.4.1.11.2.23.25027NodehPFan15Fan module failure
1.3.6.1.4.1.11.2.23.25028NodehPFan16Fan module failure
1.3.6.1.4.1.11.2.23.25780NodesystemHW84Unrecoverable chipset error has occurred in system board .
1.3.6.1.4.1.11.2.23.28609NodehPRaid2HPDA Controller: Cache Error
1.3.6.1.4.1.11.2.23.28641NodehPRaid6HPDA Hot Spare:Failed
1.3.6.1.4.1.11.2.23.28657NodehPRaid9HPDA Hard Disk Failed
1.3.6.1.4.1.11.2.23.28673NodehPRaid11HPDA Threshold Exceeded: Parity
1.3.6.1.4.1.11.2.23.28674NodehPRaid13HPDA Threshold Exceeded: Soft Errors
1.3.6.1.4.1.11.2.23.28675NodehPRaid15HPDA Threshold Exceeded: Hardware Errors
1.3.6.1.4.1.11.2.23.28676NodehPRaid17HPDA Threshold Exceeded: Miscellaneous Errors
1.3.6.1.4.1.11.2.23.28677NodehPRaid19HPDA Controller: NVRAM Age
1.3.6.1.4.1.11.2.23.29101NoderedundantPower29Indicated Power Supply has been removed.
1.3.6.1.4.1.11.2.23.29102NoderedundantPower30The indicated Power Supply has been inserted.
1.3.6.1.4.1.11.2.23.29103NoderedundantPower31The indicated Power Supply Unit power has failed.
1.3.6.1.4.1.11.2.23.29104NoderedundantPower33Power supply subsystem redundancy gained.
1.3.6.1.4.1.11.2.23.29105NoderedundantPower34Power supply sunsystem redundancy lost.
1.3.6.1.4.1.11.2.23.29106NoderedundantPower35The server Power Supply Subsystem has fewer than the required number of Power Supply Units installed for normal operation.
1.3.6.1.4.1.11.2.23.29107NoderedundantPower36The server Power Supply Subsystem has fewer than the required number of Power Supply Units installed for normal operation.
1.3.6.1.4.1.11.2.23.29109NoderedundantPower32Predictive failure/alert in power supply
1.3.6.1.4.1.11.2.23.34356NodesystemHW4System boot (POST Complete).
1.3.6.1.4.1.11.2.23.34357NodesystemHW5Netserver Management Controller started
1.3.6.1.4.1.11.2.23.34456NodesystemHW46Event log cleared
1.3.6.1.4.1.11.2.23.44456NodesystemHW47SDR area cleared
1.3.6.1.4.1.11.2.23.44457NodesystemHW83sFRU internal use area cleared
1.3.6.1.4.1.11.2.23.53001NodesystemHW100SMART predictive failure detected
1.3.6.1.4.1.11.2.23.54453NodesystemHW33system Voltage failure
1.3.6.1.4.1.11.2.23.54454NodesystemHW36A SCSI cable has been removed from the hot swap cage.
1.3.6.1.4.1.11.2.23.54455NodesystemHW37A SCSI cable was attached to hot swap cage.
1.3.6.1.4.1.11.2.23.54456NodesystemHW38A SCSI terminator has been removed from the hot swap cage.
1.3.6.1.4.1.11.2.23.54457NodesystemHW39A SCSI terminator has been attached in the hot swap cage.
1.3.6.1.4.1.11.2.23.54460NodesystemHW74SCSI Duplex Board has been removed
1.3.6.1.4.1.11.2.23.54461NodesystemHW75SCSI Duplex Board has been inserted
1.3.6.1.4.1.11.2.23.54464NodesystemHW78SCSI Bus Type has changed
1.3.6.1.4.1.11.2.23.54465NodesystemHW76Normal ACPI server shutdown
1.3.6.1.4.1.11.2.23.54466NodesystemHW77ACPI hardware failure
1.3.6.1.4.1.11.2.23.116385NodenetworkCard2The total number of packets with receive errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.116386NodenetworkCard6The total number of packets with transmit errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.116387NodenetworkCard10The total number of LAN Adapter reset errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.116388NodenetworkCard14The total number of alignment and CRC errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.116389NodenetworkCard18The total number of giant frame packets has exceeded the threshold.
1.3.6.1.4.1.11.2.23.116390NodenetworkCard22The total number of packets with length less than the required minimum length has exceeded the threshold.
1.3.6.1.4.1.11.2.23.116391NodenetworkCard26The total number of late collision errors has exceeded the threshold (the network is too large).
1.3.6.1.4.1.11.2.23.116392NodenetworkCard30The total number of colliding packets has exceeded the threshold (the network is too busy).
1.3.6.1.4.1.11.2.23.116393NodenetworkCard34The total number of carrier sense errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.116394NodenetworkCard38The total number of adapter deferrals has exceeded the threshold (the network is forever busy).
1.3.6.1.4.1.11.2.23.116395NodenetworkCard42The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.116396NodenetworkCard46The total number of Receive Overflow errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.116397NodenetworkCard50LAN adapter utilization count has exceeded the threshold.
1.3.6.1.4.1.11.2.23.116398NodenetworkCard54The LAN adapter which the alarms were configured for, has been replaced by another type of LAN adapter.
1.3.6.1.4.1.11.2.23.116418NodenetworkCard66The active NIC in a redundant group has failed. The standby NIC has taken over.
1.3.6.1.4.1.11.2.23.116419NodenetworkCard68A previously failed NIC in a redundant group has become operational.
1.3.6.1.4.1.11.2.23.116420NodenetworkCard70The standby NIC in a redundant group has failed.
1.3.6.1.4.1.11.2.23.116421NodenetworkCard72All NICs (active and standby) in a redundant group have failed.
1.3.6.1.4.1.11.2.23.209103NoderedundantPower3Indicates a failure with the AC power source that is connected to one of the redundant power supply units.
1.3.6.1.4.1.11.2.23.209106NoderedundantPower6Indicates that one of the redundant power supply modules is in over temperature protection mode.
1.3.6.1.4.1.11.2.23.209109NoderedundantPower10Indicates that one of the redundant power supply modules in the HP NetServer has recovered from an over temperature protection mode.
1.3.6.1.4.1.11.2.23.209110NoderedundantPower12Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the warning temperature level.
1.3.6.1.4.1.11.2.23.216385NodenetworkCard3The total number of packets with receive errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.216386NodenetworkCard7The total number of packets with transmit errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.216387NodenetworkCard11The total number of LAN Adapter reset errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.216388NodenetworkCard15The total number of alignment and CRC errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.216389NodenetworkCard19The total number of giant frame packets has exceeded the threshold.
1.3.6.1.4.1.11.2.23.216390NodenetworkCard23The total number of packets with length less than the required minimum length has exceeded the threshold.
1.3.6.1.4.1.11.2.23.216391NodenetworkCard27The total number of late collision errors has exceeded the threshold (the network is too large).
1.3.6.1.4.1.11.2.23.216392NodenetworkCard31The total number of colliding packets has exceeded the threshold (the network is too busy).
1.3.6.1.4.1.11.2.23.216393NodenetworkCard35The total number of carrier sense errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.216394NodenetworkCard39The total number of adapter deferrals has exceeded the threshold (the network is forever busy).
1.3.6.1.4.1.11.2.23.216395NodenetworkCard43The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.216396NodenetworkCard47The total number of Receive Overflow errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.216397NodenetworkCard51LAN adapter utilization count has exceeded the threshold.
1.3.6.1.4.1.11.2.23.220560NodesystemHW10sI/0 channel check activated by device in EISA slot caused an error
1.3.6.1.4.1.11.2.23.220592NodehPECCMemory10System memory size reduced due to error in memory slot
1.3.6.1.4.1.11.2.23.220624NodesystemHW15Parity error has occurred on a transfer to or from a device on one of the PCI buses
1.3.6.1.4.1.11.2.23.220640NodesystemHW17System error has occurred in the PCI subsystem
1.3.6.1.4.1.11.2.23.220752NodeaSR4Server has been restarted after the system watchdog timer has timed out due to NOS being hung
1.3.6.1.4.1.11.2.23.220800NodesystemHW31Configuration Utility has altered system configuration
1.3.6.1.4.1.11.2.23.222705NoderedundantPower17Temperature alert on designated Power Supply.
1.3.6.1.4.1.11.2.23.222706NoderedundantPower19Fan failure on designated Power Supply.
1.3.6.1.4.1.11.2.23.222708NoderedundantPower22Fan speed-up on designated Power Supply.
1.3.6.1.4.1.11.2.23.224449Nodetemperature7Hot Swap Cage : Temperature monitor error occurred
1.3.6.1.4.1.11.2.23.224451Nodetemperature8Hot Swap Cage : Warning temperature exceeded
1.3.6.1.4.1.11.2.23.224452Nodetemperature9Hot Swap Cage : Emergency temperature exceeded!
1.3.6.1.4.1.11.2.23.224453NodesystemHW40Power connection failure in one of the devices in the hot swap cage
1.3.6.1.4.1.11.2.23.224454NodesystemHW41A device has been removed from the hot swap cage
1.3.6.1.4.1.11.2.23.224455NodesystemHW42A device has been inserted into the hot swap cage
1.3.6.1.4.1.11.2.23.254454NodesystemHW67A SCSI cable has been removed from the hot swap cage.
1.3.6.1.4.1.11.2.23.254455NodesystemHW68A SCSI cable was attached to the hot swap cage.
1.3.6.1.4.1.11.2.23.254456NodesystemHW69A SCSI terminator has been removed from the hot swap cage.
1.3.6.1.4.1.11.2.23.254457NodesystemHW70A SCSI terminator has been attached in the hot swap cage.
1.3.6.1.4.1.11.2.23.316385NodenetworkCard4The total number of packets with receive errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.316386NodenetworkCard8The total number of packets with transmit errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.316387NodenetworkCard12The total number of LAN Adapter reset errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.316388NodenetworkCard16The total number of alignment and CRC errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.316389NodenetworkCard20The total number of giant frame packets has exceeded the threshold.
1.3.6.1.4.1.11.2.23.316390NodenetworkCard24The total number of packets with length less than the required minimum length has exceeded the threshold.
1.3.6.1.4.1.11.2.23.316391NodenetworkCard28The total number of late collision errors has exceeded the threshold (the network is too large).
1.3.6.1.4.1.11.2.23.316392NodenetworkCard32The total number of colliding packets has exceeded the threshold (the network is too busy).
1.3.6.1.4.1.11.2.23.316393NodenetworkCard36The total number of carrier sense errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.316394NodenetworkCard40The total number of adapter deferrals has exceeded the threshold (the network is forever busy).
1.3.6.1.4.1.11.2.23.316395NodenetworkCard44The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.316396NodenetworkCard48The total number of Receive Overflow errors has exceeded the threshold.
1.3.6.1.4.1.11.2.23.316397NodenetworkCard52LAN adapter utilization count has exceeded the threshold.
1.3.6.1.4.1.11.2.23.320752NodeaSR5Server has not been restarted after the system watchdog timer has timed out due to NOS being hung
1.3.6.1.4.1.11.2.23.324454NodesystemHW71A drive has been removed from the hot swap cage
1.3.6.1.4.1.11.2.23.324455NodesystemHW72A drive has been inserted into the hot swap cage
1.3.6.1.4.1.11.2.23.420752NodeaSR6Server has been powered down after the system watchdog timer has timed out due to NOS being hung
1.3.6.1.4.1.11.2.23.520752NodeaSR7Server has been power cycled after the system watchdog timer has timed out due to NOS being hung
1.3.6.1.4.1.16Nodehpnr
1.3.6.1.4.1.16.1NodehpNetRAID
1.3.6.1.4.1.16.1.1NodehpNetRaidMib
1.3.6.1.4.1.16.1.1.200NoderaidTraps
1.3.6.1.4.1.795Nodeadaptec
1.3.6.1.4.1.795.2Nodestoragemanagement
1.3.6.1.4.1.795.2.5Nodecyclone
1.3.6.1.4.1.795.2.5.126NodesCSISmart22Aspi: initializing
1.3.6.1.4.1.795.2.5.9000NodecycTraps
1.3.6.1.4.1.795.3NodeadaptecRaid
1.3.6.1.4.1.795.4NodeadaptecNm
1.3.6.1.4.1.795.4.1NodeadaptecNmScsiStatus
1.3.6.1.4.1.795.4.1.8193NodeadaptecSCSI1Device Database has been corrupted.
1.3.6.1.4.1.795.4.1.8194NodeadaptecSCSI3SCSI Status agent was unloaded from a NetWare Server.
1.3.6.1.4.1.795.4.1.8196NodeadaptecSCSI5One of the SCSI HBAs can no longer be detected by the SCSI Status agent.
1.3.6.1.4.1.795.4.1.8197NodeadaptecSCSI7A Host Adapter which has failed, has become accessible again.
1.3.6.1.4.1.795.4.1.8198NodeadaptecSCSI9A new SCSI Host Bus Adapter has been discovered or device database has been cleared.
1.3.6.1.4.1.795.4.1.8199NodeadaptecSCSI11One of the SCSI devices installed on the server can no longer be detected by the SCSI Status agent.
1.3.6.1.4.1.795.4.1.8200NodeadaptecSCSI13A SCSI device which has failed, has become accessible again.
1.3.6.1.4.1.795.4.1.8201NodeadaptecSCSI15A new SCSI device has been discovered.
1.3.6.1.4.1.795.4.1.8205NodeadaptecSCSI17The SCSI Status agent detected that the Host Bus Adapter has been changed.
1.3.6.1.4.1.795.4.1.8206NodeadaptecSCSI21The SCSI Status agent detected that a SCSI device installed on the server has been changed.
1.3.6.1.4.1.795.4.1.8208NodeadaptecSCSI19The SCSI Status agent sent a request to an HBA and the request never completed.
1.3.6.1.4.1.795.4.1.8209NodeadaptecSCSI23The SCSI Status agent sent a request to a SCSI device and the request never completed.
1.3.6.1.4.1.795.4.1.18193NodeadaptecSCSI2Device Database has been corrupted.
1.3.6.1.4.1.795.4.1.18194NodeadaptecSCSI4SCSI Status agent was unloaded from a NetWare Server.
1.3.6.1.4.1.795.4.1.18196NodeadaptecSCSI6One of the SCSI HBAs can no longer be detected by the SCSI Status agent.
1.3.6.1.4.1.795.4.1.18197NodeadaptecSCSI8A Host Adapter which has failed, has become accessible again.
1.3.6.1.4.1.795.4.1.18198NodeadaptecSCSI10A new SCSI Host Bus Adapter has been discovered or device database has been cleared.
1.3.6.1.4.1.795.4.1.18199NodeadaptecSCSI12One of the SCSI devices installed on the server can no longer be detected by the SCSI Status agent.
1.3.6.1.4.1.795.4.1.18200NodeadaptecSCSI14A SCSI device which has failed, has become accessible again.
1.3.6.1.4.1.795.4.1.18201NodeadaptecSCSI16A new SCSI device has been discovered.
1.3.6.1.4.1.795.4.1.18205NodeadaptecSCSI18The SCSI Status agent detected that the Host Bus Adapter has been changed.
1.3.6.1.4.1.795.4.1.18206NodeadaptecSCSI22The SCSI Status agent detected that a SCSI device installed on the server has been changed.
1.3.6.1.4.1.795.4.1.18208NodeadaptecSCSI20The SCSI Status agent sent a request to an HBA and the request never completed.
1.3.6.1.4.1.795.4.1.18209NodeadaptecSCSI24The SCSI Status agent sent a request to a SCSI device and the request never completed.
1.3.6.1.4.1.795.10Noderaidproducts
1.3.6.1.4.1.795.10.1Nodeaac
1.3.6.1.4.1.795.10.1.50Nodeaac-hpn
1.3.6.1.4.1.1123Nodesymbios
1.3.6.1.4.1.1123.3Nodecoloradosprings
1.3.6.1.4.1.1123.3.1Nodescsi
1.3.6.1.4.1.1123.3.1.2Nodesymc8xx
1.3.6.1.4.1.1123.3.1.2.2NodesymTrap
1.3.6.1.4.1.1608NodeeMylex1
1.3.6.1.4.1.1608.1NodeeMylex2
1.3.6.1.4.1.1608.1.1NodeeMylex3
1.3.6.1.4.1.1608.1.1.1NodeeMylex4
1.3.6.1.4.1.1608.1.1.1.9NodeeMylex5
1.3.6.1.4.1.1608.1.1.1.9.1NodeeMylexRaidEventInformation
1.3.6.1.4.1.1608.1.1.1.9.1.1NodedmtfStd
1.3.6.1.4.1.1608.1.1.1.9.1.1.1NodedmtfComponents
1.3.6.1.4.1.1608.1.1.1.9.1.1.1.1NodedmtfGroups
MIB Viewer