HT-802115G-MGMT-MIB
159 objects
Hitron 802.11 5g management MIB
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8595.802115 | IdentityhitronWifi5gMgmt | Hitron 802.11 5g management MIB | ||
| 1.3.6.1.4.1.8595.802115.1 | Nodewifi5gMgmtBase | |||
| 1.3.6.1.4.1.8595.802115.1.1 | Scalarwifi5gOperMode | read-write | current | Used to control the 802.11 operational mode. If set to notAvailable(0), then the wireless interface will be disabled, with the radio off, and no wireless setti… |
| 1.3.6.1.4.1.8595.802115.1.4 | Scalarwifi5gCurrentChannel | read-write | current | Controls and reflects the current channel number. The setting value of wifi5gCurrentChannel should match with hitronWifi5gChannelList. |
| 1.3.6.1.4.1.8595.802115.1.5 | Scalarwifi5gBeaconInterval | read-write | current | Controls and reflects the beacon interval for the device. |
| 1.3.6.1.4.1.8595.802115.1.6 | Scalarwifi5gDTIMInterval | read-write | current | Controls and reflects the DTIM interval for the device. |
| 1.3.6.1.4.1.8595.802115.1.7 | Scalarwifi5gFragThresh | read-write | current | Controls and reflects the fragmentation threshold for the device. |
| 1.3.6.1.4.1.8595.802115.1.8 | Scalarwifi5gRTSThresh | read-write | current | Controls and reflects the RTS threshold for the device. |
| 1.3.6.1.4.1.8595.802115.1.11 | Scalarwifi5g11nNetMode | read-write | current | Controls and reflects the operating mode of 5g band |
| 1.3.6.1.4.1.8595.802115.1.12 | Scalarwifi5gProtectionEnable | read-write | current | Controls and reflects the state of 5g protection. If set to true(1), the AP will use RTS/CTS to improve 802.11a performance in mixed 802.11a/802.11n networks. … |
| 1.3.6.1.4.1.8595.802115.1.13 | Scalarwifi5gRate | read-write | current | Forces the transmission rate for the AP to a particular speed MCS (Modulation Coding Schemes) data rates above are given with BW=20MHz and Long Guard Interval … |
| 1.3.6.1.4.1.8595.802115.1.14 | Scalarwifi5gOutputPower | read-write | current | Sets the output power relative to the hardware's maximum capability. |
| 1.3.6.1.4.1.8595.802115.1.15 | ScalarhitronWifi5gMbssUserControl | read-write | current | |
| 1.3.6.1.4.1.8595.802115.1.16 | ScalarhitronWifi5gResetDefaults | read-write | current | Reset all Wifi parameters back to factory default. This only affects the Wifi parameters, no other value is reset. As long as the security settings have not ch… |
| 1.3.6.1.4.1.8595.802115.1.17 | Scalarwifi5gChannelBandwidth | read-write | current | Selects 20MHz or 40MHz or 80MHz channel bandwidth operation. 80MHz (channel bonding) allows to get high throughput. |
| 1.3.6.1.4.1.8595.802115.1.18 | Scalarwifi5gExtensionChannel | read-write | current | The OID for setting the extension are below (the preceding 20MHz frequency band) or above (the succeeding 20MHz frequency band). |
| 1.3.6.1.4.1.8595.802115.1.19 | ScalarhitronWifi5gChannelList | read-write | current | This OID describe the channels supported by the 5Gwifi AP. For North Amrica, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, … |
| 1.3.6.1.4.1.8595.802115.1.20 | ScalarhitronWifi5gRadiusReAuthInterval | read-write | current | The network re-authentication interval. If set to zero, no re-authentication will be performed. |
| 1.3.6.1.4.1.8595.802115.1.21 | ScalarhitronWifi5gACSChannels | read-write | current | This OID describe the channels can be select by the 5Gwifi ACS. For all mode, all channels can be selected. For default mode, 36, 40, 44, 48, 52, 56, 60, 64, 1… |
| 1.3.6.1.4.1.8595.802115.5 | NodehitronWifi5gMgmtMbss | |||
| 1.3.6.1.4.1.8595.802115.5.1 | NodehitronWifi5gMbssBase | |||
| 1.3.6.1.4.1.8595.802115.5.1.14 | TablehitronWifi5gBssTable | not-accessible | current | A table of entries in an MBSS system. |
| 1.3.6.1.4.1.8595.802115.5.1.14.1 | RowhitronWifi5gBssEntry | not-accessible | current | An entry describing the characteristics of an individual BSS. An entry exists in this table for each entry of type ieee80211 (71) in the ifTable. |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.1 | ColumnhitronWifi5gBssId | read-only | current | The physical address associated with this service set. |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.2 | ColumnhitronWifi5gBssEnable | read-write | current | Enables or disables this service set. All other SSID, except for the primary SSID, are disabled. |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.3 | ColumnhitronWifi5gBssSsid | read-write | current | Controls and reflects the service set identifier for this BSS. |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.5 | ColumnhitronWifi5gBssSecurityMode | read-write | current | Security mode may be chosen from Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise , RADIUS-WEP or WPA_Auto. In WPA_Auto the unit will auto-dete… |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.6 | ColumnhitronWifi5gBssClosedNetwork | read-write | current | Controls whether the device will operate in closed network mode. If set to true(1), then the network mode is closed and the SSID will not be broadcast in beaco… |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.7 | ColumnhitronWifi5gBssAccessMode | read-write | current | Controls what stations will be given access to the device. If set to allowAny(1), then any station will be allowed to connect. If set to allowList(2), then onl… |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.8 | ColumnhitronWifi5gBssWMMEnable | read-write | current | WMM adds prioritized capabilities (voice, video, best effort, background) to Wi-Fi networks and optimizes their performances when multiple concurring applicati… |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.9 | ColumnhitronWifi5gBssAccessOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current Access setting in the device. IF false, … |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.10 | ColumnhitronWifi5gBssMgmtWebAccessEnable | read-write | current | this mib contol the cpe which connect behind the wifi can access webpage. |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.12 | ColumnhitronWifi5gBssRadiusSelectedInterface | read-write | current | This object controls which interface is used for the RADIUS security. The default value depends on the MSO's requirement. |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.13 | ColumnhitronWifi5gBssSsidPrefix | read-write | current | Controls the default value of Wi-Fi SSID name prefix,which must use together with hitronWifiBssSsidMacAddr.Examples : 'HITRON-','VENDOR_'. |
| 1.3.6.1.4.1.8595.802115.5.1.14.1.14 | ColumnhitronWifi5gBssSsidMacAddr | read-write | current | A 12 digit string controls the default value of Wi-Fi SSID name suffix, which must use together with hitronWifiBssSsidPrefix .Each digit MUST be character 0 or… |
| 1.3.6.1.4.1.8595.802115.5.2 | NodehitronWifi5gMbssSecurity | |||
| 1.3.6.1.4.1.8595.802115.5.2.1 | TablehitronWifi5gBssWepTable | not-accessible | current | A table used to configure settings related to the WEP security modes. |
| 1.3.6.1.4.1.8595.802115.5.2.1.1 | RowhitronWifi5gBssWepEntry | not-accessible | current | An entry defining the WPA characteristics of an individual service set. A row exists in this table for each row in the hitronWifi5gBssTable for which hitronWif… |
| 1.3.6.1.4.1.8595.802115.5.2.1.1.1 | ColumnhitronWifi5gBssWepDefaultKey | read-write | current | Controls and reflects the default key which will be used when 64 or 128 bit encryption is enabled. Indicates the entry from the hitronWifi5gBssWep64BitKeyTable… |
| 1.3.6.1.4.1.8595.802115.5.2.1.1.2 | ColumnhitronWifi5gBssWepEncryptionMode | read-write | current | Selects the WEP encryption method used by this service set. If set to wep64(1), then 64 bit WEP encryption will be used with the keys from the hitronWifi5gBssW… |
| 1.3.6.1.4.1.8595.802115.5.2.2 | TablehitronWifi5gBssWep64BitKeyTable | not-accessible | current | A table of 40 bit key values used when operating in WEP 64 mode. |
| 1.3.6.1.4.1.8595.802115.5.2.2.1 | RowhitronWifi5gBssWep64BitKeyEntry | not-accessible | current | A key to be used by the row in the hitronWifi5gBssTable identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.802115.5.2.2.1.1 | ColumnhitronWifi5gBssWep64BitKeyIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.802115.5.2.2.1.2 | ColumnhitronWifi5gBssWep64BitKeyValue | read-write | current | A 40 bit key to be used when the corresponding instance of hitronWifi5gBssSecurityMode is set to wep(1) and the corresponding instance of hitronWifi5gBssWepEnc… |
| 1.3.6.1.4.1.8595.802115.5.2.3 | TablehitronWifi5gBssWep128BitKeyTable | not-accessible | current | A table of 104 bit key values used when operating in WEP 128 mode. |
| 1.3.6.1.4.1.8595.802115.5.2.3.1 | RowhitronWifi5gBssWep128BitKeyEntry | not-accessible | current | A key to be used by the row in the hitronWifi5gBssTable identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.802115.5.2.3.1.1 | ColumnhitronWifi5gBssWep128BitKeyIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.802115.5.2.3.1.2 | ColumnhitronWifi5gBssWep128BitKeyValue | read-write | current | A 104 bit key to be used when the corresponding instance of hitronWifi5gBssSecurityMode is set to wep(1) and the corresponding instance of hitronWifi5gBssWepEn… |
| 1.3.6.1.4.1.8595.802115.5.2.4 | TablehitronWifi5gBssWpaTable | not-accessible | current | A table used to configure settings related to the WPA security modes. |
| 1.3.6.1.4.1.8595.802115.5.2.4.1 | RowhitronWifi5gBssWpaEntry | not-accessible | current | An entry defining the WPA characteristics of an individual service set. A row exists in this table for each row in the hitronWifi5gBssTable for which hitronWif… |
| 1.3.6.1.4.1.8595.802115.5.2.4.1.1 | ColumnhitronWifi5gBssWpaAlgorithm | read-write | current | Controls and reflects the WPA encryption mode used by the service set. The WPA algorithm for WPA-PSK and WPA-Enterprise security mode is either tkip(1) or aes(… |
| 1.3.6.1.4.1.8595.802115.5.2.4.1.2 | ColumnhitronWifi5gBssWpaPreSharedKey | read-write | current | Sets the WPA Pre-Shared Key (PSK) used by this service set. This value MUST be either a 64 byte hexadecimal number, OR an 8 to 63 character ASCII string. All o… |
| 1.3.6.1.4.1.8595.802115.5.2.4.1.3 | ColumnhitronWifi5gBssWpaGroupRekeyInterval | read-write | current | Sets the WPA Group Rekey Interval for this service set. If set to zero, periodic rekeying is disabled for this service set. |
| 1.3.6.1.4.1.8595.802115.5.2.5 | TablehitronWifi5gBssRadiusTable | not-accessible | current | A table used to configure settings related to the RADIUS security modes, including WPA-Enterprise, WPA2-Enterprise and RADIUS-WEP. |
| 1.3.6.1.4.1.8595.802115.5.2.5.1 | RowhitronWifi5gBssRadiusEntry | not-accessible | current | An entry defining the RADIUS characteristics of an individual service set. A row exists in this table for each row in the hitronWifi5gBssTable for which hitron… |
| 1.3.6.1.4.1.8595.802115.5.2.5.1.1 | ColumnhitronWifi5gBssRadiusAddressType | read-write | current | The type of internet address used for hitronWifi5gBssRadiusAddress. |
| 1.3.6.1.4.1.8595.802115.5.2.5.1.2 | ColumnhitronWifi5gBssRadiusAddress | read-write | current | The internet address of the RADIUS server for this service set. |
| 1.3.6.1.4.1.8595.802115.5.2.5.1.3 | ColumnhitronWifi5gBssRadiusPort | read-write | current | The UDP port used to communicate with the RADIUS server for this service set. |
| 1.3.6.1.4.1.8595.802115.5.2.5.1.4 | ColumnhitronWifi5gBssRadiusKey | read-write | current | The RADIUS key. |
| 1.3.6.1.4.1.8595.802115.5.3 | NodehitronWifi5gMbssAccess | |||
| 1.3.6.1.4.1.8595.802115.5.3.1 | TablehitronWifi5gBssAccessTable | not-accessible | current | A table of MAC addresses which defines the MAC address based access restrictions for the system. |
| 1.3.6.1.4.1.8595.802115.5.3.1.1 | RowhitronWifi5gBssAccessEntry | not-accessible | current | A row in the table which specifies a single MAC address for a given service set. |
| 1.3.6.1.4.1.8595.802115.5.3.1.1.1 | ColumnhitronWifi5gBssAccessIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.8595.802115.5.3.1.1.2 | ColumnhitronWifi5gBssAccessStation | read-write | current | A MAC address of a station which will be allowed to connect to the service set if hitronWifi5gBssAccessMode is set to restrictToList(2), or forbidden if hitron… |
| 1.3.6.1.4.1.8595.802115.5.4 | NodehitronWifi5gMbssIpRoute | |||
| 1.3.6.1.4.1.8595.802115.5.4.1 | TablehitronWifi5gMbssIpRouteTable | not-accessible | current | Table containing information for the Network definition. |
| 1.3.6.1.4.1.8595.802115.5.4.1.1 | RowhitronWifi5gMbssIpRouteEntry | not-accessible | current | Entry containing all the information about the Network definition. |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.1 | ColumnhitronWifi5gMbssIpRouteEnabled | read-write | current | It controls the independency of the subnet for the specified SSID. If its value is true, this SSID would have its own subnet which is independent from the othe… |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.2 | ColumnhitronWifi5gMbssIpRouteMode | read-write | current | The specifies the Type of network that is being defined. |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.3 | ColumnhitronWifi5gMbssIpRouteIpType | read-write | current | Ip Address Type of the VLAN IP for a specific Network. |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.4 | ColumnhitronWifi5gMbssIpRouteIp | read-write | current | Ip Address of the VLAN IP for a specific Network. |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.5 | ColumnhitronWifi5gMbssIpRouteSubnetMaskType | read-write | current | Ip Address Type of the SubnetMask for a specific Network. |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.6 | ColumnhitronWifi5gMbssIpRouteSubnetMask | read-write | current | Ip Address of the SubnetMask for a specific Network. |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.7 | ColumnhitronWifi5gMbssIpRoutePriDnsServerIpType | read-write | current | Ip Address Type of the Primary DNS for a specific Network. |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.8 | ColumnhitronWifi5gMbssIpRoutePriDnsServerIp | read-write | current | Ip Address of the Primary DNS for a specific Network. When the hitronWifi5gMbssIpRouteEnabled is false,it will use the hitronGwMgmtLanDnsServerIp in HITRON-GW-… |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.9 | ColumnhitronWifi5gMbssIpRouteSecDnsServerIpType | read-write | current | Ip Address Type of the Second DNS for a specific Network. |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.10 | ColumnhitronWifi5gMbssIpRouteSecDnsServerIp | read-write | current | Ip Address of the Second DNS for a specific Network. When the hitronWifi5gMbssIpRouteEnabled is false,it will use the hitronGwMgmtLanDnsServerIp in HITRON-GW-M… |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.11 | ColumnhitronWifi5gMbssIpRouteTypeOfService | read-write | current | Byte value to be used for the override TOS field for all IP packets on this BSS. A value of 0 means dont override, where any other value will be used to overri… |
| 1.3.6.1.4.1.8595.802115.5.4.1.1.12 | ColumnhitronWifi5gMbssIpRouteFirewallEnable | read-write | current | . |
| 1.3.6.1.4.1.8595.802115.5.5 | NodehitronWifi5gMbssDhcp | |||
| 1.3.6.1.4.1.8595.802115.5.5.1 | TablehitronWifi5gBssDhcpTable | not-accessible | current | A table of DHCP servers which define DHCP related information for the system. |
| 1.3.6.1.4.1.8595.802115.5.5.1.1 | RowhitronWifi5gBssDhcpEntry | not-accessible | current | A row in the table which defines the DHCP service for a given SSID ifindex. |
| 1.3.6.1.4.1.8595.802115.5.5.1.1.1 | ColumnhitronWifi5gBssDhcpEnable | read-write | current | true(1): DHCP server enabled false(2): DHCP server disabled |
| 1.3.6.1.4.1.8595.802115.5.5.1.1.2 | ColumnhitronWifi5gBssDhcpServerType | read-write | current | DHCP Server type |
| 1.3.6.1.4.1.8595.802115.5.5.1.1.3 | ColumnhitronWifi5gBssDhcpLeasePoolStart | read-write | current | DHCP Server Lease Pool Start ( default is 192.168.x.10 ) |
| 1.3.6.1.4.1.8595.802115.5.5.1.1.4 | ColumnhitronWifi5gBssDhcpLeasePoolEnd | read-write | current | DHCP Server Lease Pool End ( default is 192.168.x.199 ) |
| 1.3.6.1.4.1.8595.802115.5.5.1.1.5 | ColumnhitronWifi5gBssDhcpLeaseTime | read-write | current | DHCP Lease Time ( default is 86400 sec ) |
| 1.3.6.1.4.1.8595.802115.5.6 | NodehitronWifi5gMbssParentalCtrl | |||
| 1.3.6.1.4.1.8595.802115.5.6.1 | NodehitronWifi5gBssParentalCtrlEnable | |||
| 1.3.6.1.4.1.8595.802115.5.6.1.1 | TablehitronWifi5gBssParentalCtrlEnableTable | not-accessible | current | A table which defined the on/off of parental control for the each SSID. |
| 1.3.6.1.4.1.8595.802115.5.6.1.1.1 | RowhitronWifi5gBssParentalCtrlEnableEntry | not-accessible | current | A row in the table defines on/off for the parental control for a given wifi SSID. |
| 1.3.6.1.4.1.8595.802115.5.6.1.1.1.1 | ColumnhitronWifi5gBssParentalCtrlEnableVal | read-write | current | true(1): Parental Control enabled false(2): Parental Control disabled |
| 1.3.6.1.4.1.8595.802115.5.6.1.1.1.2 | ColumnhitronWifi5gBssParentalCtrlOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current setting in the device. IF false, it mean… |
| 1.3.6.1.4.1.8595.802115.5.6.2 | NodehitronWifi5gBssParentalCtrlBlocked | |||
| 1.3.6.1.4.1.8595.802115.5.6.2.1 | TablehitronWifi5gBssParentalCtrlBlockedTable | not-accessible | current | A table which defined the Key words or URL for parental control for the each SSID. |
| 1.3.6.1.4.1.8595.802115.5.6.2.1.1 | RowhitronWifi5gBssParentalCtrlBlockedEntry | not-accessible | current | A row in the table defines the ker word or URL for the parental control for a given wifi SSID. |
| 1.3.6.1.4.1.8595.802115.5.6.2.1.1.1 | ColumnhitronWifi5gBssParentalCtrlBlockedIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.802115.5.6.2.1.1.2 | ColumnhitronWifi5gBssParentalCtrlBlockedVal | read-write | current | The key words or URL used to screen and block the content. If it is set to zero string ,it means delete this key word from the List. |
| 1.3.6.1.4.1.8595.802115.5.6.3 | NodehitronWifi5gBssParentalCtrlTrusted | |||
| 1.3.6.1.4.1.8595.802115.5.6.3.1 | TablehitronWifi5gBssParentalCtrlTrustedTable | not-accessible | current | A table which defined the trusted MAC addresses for parental control for the each SSID. |
| 1.3.6.1.4.1.8595.802115.5.6.3.1.1 | RowhitronWifi5gBssParentalCtrlTrustedEntry | not-accessible | current | A row in the table defines the trusted MAC addresses for the parental control for a given wifi SSID. |
| 1.3.6.1.4.1.8595.802115.5.6.3.1.1.1 | ColumnhitronWifi5gBssParentalCtrlTrustedIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.802115.5.6.3.1.1.2 | ColumnhitronWifi5gBssParentalCtrlTrustedVal | read-write | current | The MAC address which is trusted and without parental control. If it is set to 0x000000000000 from an effective MAC address,it means delete this MAC address fr… |
| 1.3.6.1.4.1.8595.802115.5.6.4 | NodehitronWifi5gBssParentalCtrlSchedule | |||
| 1.3.6.1.4.1.8595.802115.5.6.4.1 | TablehitronWifi5gBssParentalCtrlScheduleTable | not-accessible | current | A table which defined the schedule for parental control for the each SSID. |
| 1.3.6.1.4.1.8595.802115.5.6.4.1.1 | RowhitronWifi5gBssParentalCtrlScheduleEntry | not-accessible | current | A row in the table defines the Schedule for the parental control for a given wifi SSID. |
| 1.3.6.1.4.1.8595.802115.5.6.4.1.1.1 | ColumnhitronWifi5gBssParentalCtrlWeek | read-write | current | Each bit of the byte represent each day of the week. From bit 0 to 6 ,they represent Monday to Sunday. |
| 1.3.6.1.4.1.8595.802115.5.6.4.1.1.2 | ColumnhitronWifi5gBssParentalCtrlHourStart | read-write | current | Start hour of the parental control |
| 1.3.6.1.4.1.8595.802115.5.6.4.1.1.3 | ColumnhitronWifi5gBssParentalCtrlHourEnd | read-write | current | End hour of the parental control |
| 1.3.6.1.4.1.8595.802115.5.6.4.1.1.4 | ColumnhitronWifi5gBssParentalCtrlMinStart | read-write | current | Start minute of the parental control |
| 1.3.6.1.4.1.8595.802115.5.6.4.1.1.5 | ColumnhitronWifi5gBssParentalCtrlMinEnd | read-write | current | End minute of the parental control |
| 1.3.6.1.4.1.8595.802115.5.7 | NodehitronWifi5gMbssIPFilterCtrl | |||
| 1.3.6.1.4.1.8595.802115.5.7.1 | NodehitronWifi5gBssIPFilterCtrlEnable | |||
| 1.3.6.1.4.1.8595.802115.5.7.1.1 | TablehitronWifi5gBssIPFilterCtrlEnableTable | not-accessible | current | A table which defined the on/off of IP filter function for the each SSID. |
| 1.3.6.1.4.1.8595.802115.5.7.1.1.1 | RowhitronWifi5gBssIPFilterCtrlEnableEntry | not-accessible | current | A row in the table defines on/off for the IP filter for a given wifi SSID. |
| 1.3.6.1.4.1.8595.802115.5.7.1.1.1.1 | ColumnhitronWifi5gBssIPFilterCtrlEnableVal | read-write | current | true(1): IP filter function enabled false(2): IP filter function disabled |
| 1.3.6.1.4.1.8595.802115.5.7.1.1.1.2 | ColumnhitronWifi5gBssIPFilterCtrlOverWrite | read-write | current | If this value is true, it means the configuration through DOCSIS config file would clean out and overwrite the current setting in the device. IF false, it mean… |
| 1.3.6.1.4.1.8595.802115.5.7.2 | NodehitronWifi5gBssIPFilterCtrlSetup | |||
| 1.3.6.1.4.1.8595.802115.5.7.2.1 | TablehitronWifi5gBssIPFilterCtrlSetupTable | not-accessible | current | A table which defined the setup for IP filter control for the each SSID. |
| 1.3.6.1.4.1.8595.802115.5.7.2.1.1 | RowhitronWifi5gBssIPFilterCtrlSetupEntry | not-accessible | current | A row in the table defines the setup for the IP filter for a given wifi SSID. |
| 1.3.6.1.4.1.8595.802115.5.7.2.1.1.1 | ColumnhitronWifi5gBssIPFilterCtrlSetupIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.8595.802115.5.7.2.1.1.2 | ColumnhitronWifi5gBssIPFilterCtrlSetupName | read-write | current | The mnemonic name for the IP filter. Each rule should have different name.If it set to an empty string from an effective name,It means delete this filter from … |
| 1.3.6.1.4.1.8595.802115.5.7.2.1.1.3 | ColumnhitronWifi5gBssIPFilterCtrlAddressType | read-write | current | The type of internet address used for IP filter. |
| 1.3.6.1.4.1.8595.802115.5.7.2.1.1.4 | ColumnhitronWifi5gBssIPFilterCtrlIPStart | read-write | current | Start IP of the filter. This IP value must be located in the same subnet of the wifi SSID. If it's not, the whole list should be ignored. |
| 1.3.6.1.4.1.8595.802115.5.7.2.1.1.5 | ColumnhitronWifi5gBssIPFilterCtrlIPEnd | read-write | current | End IP of the filter. This IP value must be located in the same subnet of the wifi SSID. If it's not, the whole list should be ignored. |
| 1.3.6.1.4.1.8595.802115.5.7.2.1.1.6 | ColumnhitronWifi5gBssIPFilterCtrlPortStart | read-write | current | Start Port of the filter.This port value is the destination part which the end users want to access. |
| 1.3.6.1.4.1.8595.802115.5.7.2.1.1.7 | ColumnhitronWifi5gBssIPFilterCtrlPortEnd | read-write | current | End Port of the filter.This port value is the destination part which the end users want to access. |
| 1.3.6.1.4.1.8595.802115.5.7.2.1.1.8 | ColumnhitronWifi5gBssIPFilterCtrlProtocol | read-write | current | selected protocol for IP filter |
| 1.3.6.1.4.1.8595.802115.5.7.2.1.1.9 | ColumnhitronWifi5gBssIPFilterCtrlActive | read-write | current | true(1): This IP filter rule is activated false(2): This IP filter rule is de-activated. |
| 1.3.6.1.4.1.8595.802115.6 | ScalarhitronWifi5gWPS | read-write | current | Enable or disable WPS function. By default Enabled (True). If disabled, the WPS function will not be shown on the webpage. |
| 1.3.6.1.4.1.8595.802115.8 | NodehitronWifi5gSignalReceived | |||
| 1.3.6.1.4.1.8595.802115.8.1 | ScalarhitronWifi5gSignalReceivedScanRefresh | read-write | current | Scan or refresh the signal received, if want to read the signal received table, set this oid to true first. it always read as false |
| 1.3.6.1.4.1.8595.802115.8.2 | TablehitronWifi5gSignalReceivedTable | not-accessible | current | A table which displayed the signal received from the wifi client. |
| 1.3.6.1.4.1.8595.802115.8.2.1 | RowhitronWifi5gSignalReceivedEntry | not-accessible | current | A row in the table displayed the signal received from the wifi client. |
| 1.3.6.1.4.1.8595.802115.8.2.1.1 | ColumnhitronWifi5gSignalReceivedclientIndex | not-accessible | current | Integer index of the signal received table |
| 1.3.6.1.4.1.8595.802115.8.2.1.2 | ColumnhitronWifi5gSignalReceivedMac | read-only | current | Mac address of connected Wifi client |
| 1.3.6.1.4.1.8595.802115.8.2.1.3 | ColumnhitronWifi5gSignalReceivedRSSI0 | read-only | current | Received signal strength indicator for antenna 1 |
| 1.3.6.1.4.1.8595.802115.8.2.1.4 | ColumnhitronWifi5gSignalReceivedRSSI1 | read-only | current | Received signal strength indicator for antenna 2 |
| 1.3.6.1.4.1.8595.802115.8.2.1.5 | ColumnhitronWifi5gSignalReceivedRSSI2 | read-only | current | Received signal strength indicator for antenna 3. This OID is only supported for device with 3 receiving antennas. For devices with 2 receiving antenna, this v… |
| 1.3.6.1.4.1.8595.802115.8.2.1.6 | ColumnhitronWifi5gSignalReceivedPhMode | read-only | current | The wifi mode for connected wifi client. This value is matched to the physical mode of connected station. If the PhMod is OFDM, it is 11a. If the PhMod is HTMI… |
| 1.3.6.1.4.1.8595.802115.8.2.1.7 | ColumnhitronWifi5gSignalReceivedRate | read-only | current | Received signal rate |
| 1.3.6.1.4.1.8595.802115.9 | NodehitronWifi5gSiteSurvey | |||
| 1.3.6.1.4.1.8595.802115.9.1 | ScalarhitronWifi5gSiteSurveyScanRefresh | read-write | current | Scan or refresh the wifi site survey, if want to read the site survey table, set this oid to true first. it always read as false |
| 1.3.6.1.4.1.8595.802115.9.2 | TablehitronWifi5gSiteSurveyTable | not-accessible | current | A table which displayed the site survey of surrounding wifi APs. |
| 1.3.6.1.4.1.8595.802115.9.2.1 | RowhitronWifi5gSiteSurveyEntry | not-accessible | current | A row in the table displayed the site survey of surrounding wifi APs. |
| 1.3.6.1.4.1.8595.802115.9.2.1.1 | ColumnhitronWifi5gSiteSurveyapIndex | not-accessible | current | Integer index of the site survey table |
| 1.3.6.1.4.1.8595.802115.9.2.1.2 | ColumnhitronWifi5gSiteSurveyChannel | read-only | current | This OID displays the primary channel used by surrounding wifi AP. |
| 1.3.6.1.4.1.8595.802115.9.2.1.3 | ColumnhitronWifi5gSiteSurveySSID | read-only | current | This OID displays the SSID used by surrounding wifi AP. |
| 1.3.6.1.4.1.8595.802115.9.2.1.4 | ColumnhitronWifi5gSiteSurveyBSSID | read-only | current | This OID displays the BSSID of surrounding wifi AP. |
| 1.3.6.1.4.1.8595.802115.9.2.1.5 | ColumnhitronWifi5gSiteSurveySecurity | read-only | current | This OID displays the security mode used by surrounding wifi AP. |
| 1.3.6.1.4.1.8595.802115.9.2.1.6 | ColumnhitronWifi5gSiteSurveySignal | read-only | current | This OID displays the signal strength ,in percentage, of surrounding wifi AP. |
| 1.3.6.1.4.1.8595.802115.9.2.1.7 | ColumnhitronWifi5gSiteSurveyWMode | read-only | current | This OID displays the wifi mode (11a, 11n, 11ac ) used by surrounding wifi AP. |
| 1.3.6.1.4.1.8595.802115.9.2.1.8 | ColumnhitronWifi5gSiteSurveyExtCH | read-only | current | This OID displays the extended channel mode of the surrounding wifi AP. |
| 1.3.6.1.4.1.8595.802115.9.2.1.9 | ColumnhitronWifi5gSiteSurveyNT | read-only | current | This OID displays the network type of the surrounding wifi AP, infrastructure or Ad-hoc. |
| 1.3.6.1.4.1.8595.802115.9.2.1.10 | ColumnhitronWifi5gSiteSurveyWPSDPID | read-only | current | This OID displays whether the target network is using WiFi Protected Setup (WPS) or not. If the target network is using WPS, this field displays whether it is … |
| 1.3.6.1.4.1.8595.802115.99 | NodehitronWifi5gMgmtVendor | |||
| 1.3.6.1.4.1.8595.802115.99.1 | NodehitronWifiMgmt5gVendorQCA | |||
| 1.3.6.1.4.1.8595.802115.99.1.1 | ScalarhitronWifiMgmt5gVendorQCAVoWEnable | read-write | current | Controls whether to enable video-over-wireless(VoW). If this value is true, VoW will be enabled, the maximum connection number of wireless clients can reach 48… |
| 1.3.6.1.4.1.8595.802115.100 | Scalarwifi5gApplySettings | read-write | current | If set to true(1), then all settings from this MIB will be applied to the hardware for on-the-fly reconfiguration. Note that any settings made are stored to no… |