MIB Viewer

HUAWEI-BASE-TRAP-MIB

148 objects
This is the base trap definition for DataCom.
Imported Objects
ENTITY-MIBentPhysicalClass entPhysicalContainedIn entPhysicalIndex entPhysicalName
HUAWEI-FLASH-MAN-MIBhwStorageName hwStorageSpace hwStorageSpaceFree
HUAWEI-MIBhwDatacomm
HUAWEI-SECURITY-STAT-MIBhwSecStatTrapCPU hwSecStatTrapSlot
IANA-ITU-ALARM-TC-MIBIANAItuEventType IANAItuProbableCause
IF-MIBifDescr ifIndex ifName
ITU-ALARM-TC-MIBItuPerceivedSeverity
RFC1213-MIBifAdminStatus ifOperStatus
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.2011.5.25.129IdentityhwBaseTrapMIBThis is the base trap definition for DataCom.
1.3.6.1.4.1.2011.5.25.129.1NodehwBaseTrapObject
1.3.6.1.4.1.2011.5.25.129.1.1ScalarhwBaseTrapSeverityaccessible-for-notifycurrentTo describe the level of trap.
1.3.6.1.4.1.2011.5.25.129.1.2ScalarhwBaseTrapProbableCauseaccessible-for-notifycurrentTo describe the probable cause of trap.
1.3.6.1.4.1.2011.5.25.129.1.3ScalarhwBaseTrapEventTypeaccessible-for-notifycurrentTo describe the type of trap.
1.3.6.1.4.1.2011.5.25.129.1.4ScalarhwBaseTrapRelativeResourceaccessible-for-notifycurrentThis object may contain a key word to indicate the relative resource of an entity. Such as: hwEntityCommunicateError alarm may relate to a resource named 'IPC0…
1.3.6.1.4.1.2011.5.25.129.1.5ScalarhwBaseTrapReasonDescraccessible-for-notifycurrentTo describe the reason of trap in DisplayString style.
1.3.6.1.4.1.2011.5.25.129.1.6TablehwBaseThresholdTablenot-accessiblecurrentA table to config the threshold of each sensor.
1.3.6.1.4.1.2011.5.25.129.1.6.1RowhwBaseThresholdEntrynot-accessiblecurrentThe entry of threshold table.
1.3.6.1.4.1.2011.5.25.129.1.6.1.1ColumnhwBaseThresholdTypenot-accessiblecurrentThe index to indicate the type of threshold for an entry.Such as temperature, humidity ,power supply......
1.3.6.1.4.1.2011.5.25.129.1.6.1.2ColumnhwBaseThresholdIndexnot-accessiblecurrentA subindex to identify each sensor on physical entity.
1.3.6.1.4.1.2011.5.25.129.1.6.1.3ColumnhwBaseThresholdValueread-onlycurrentThe current value that been measured.
1.3.6.1.4.1.2011.5.25.129.1.6.1.4ColumnhwBaseThresholdUnitread-onlycurrent
1.3.6.1.4.1.2011.5.25.129.1.6.1.5ColumnhwBaseThresholdLowCriticalread-writecurrentThe critical alarm threshold for falling alarm. It could be used for a more dangerous instance than hwBaseThresholdLowWarning. It should be equal to hwBaseThre…
1.3.6.1.4.1.2011.5.25.129.1.6.1.6ColumnhwBaseThresholdLowWarningread-writecurrentThe normal warning threshold for falling alarm.
1.3.6.1.4.1.2011.5.25.129.1.6.1.7ColumnhwBaseThresholdHighWarningread-writecurrentThe normal warning threshold for rising alarm.
1.3.6.1.4.1.2011.5.25.129.1.6.1.8ColumnhwBaseThresholdHighCriticalread-writecurrentThe critical alarm threshold for rising alarm. It could be used for a more dangerous instance than hwBaseThresholdHighWarning. It should be equal to hwBaseThre…
1.3.6.1.4.1.2011.5.25.129.1.7TablehwBaseUsageTablenot-accessiblecurrentA table to config the threshold for each storage device.
1.3.6.1.4.1.2011.5.25.129.1.7.1RowhwBaseUsageEntrynot-accessiblecurrentThe entry for hwBaseUsageTable.
1.3.6.1.4.1.2011.5.25.129.1.7.1.1ColumnhwBaseUsageTypenot-accessiblecurrentThe index to indicate the type of threshold for an entry.Such as cpu,memory,flash and so on.
1.3.6.1.4.1.2011.5.25.129.1.7.1.2ColumnhwBaseUsageIndexnot-accessiblecurrentA subindex to identify each sensor on physical entity.
1.3.6.1.4.1.2011.5.25.129.1.7.1.3ColumnhwBaseUsageValueread-onlycurrentThe current value that been measured.
1.3.6.1.4.1.2011.5.25.129.1.7.1.4ColumnhwBaseUsageUnitread-onlycurrentThe unit for this threshold value. percentage(1)
1.3.6.1.4.1.2011.5.25.129.1.7.1.5ColumnhwBaseUsageThresholdread-writecurrentThe threshold of usage for storage device.
1.3.6.1.4.1.2011.5.25.129.1.8ScalarhwFIBOverloadModuleaccessible-for-notifycurrentmodule is ipv4 or ipv6
1.3.6.1.4.1.2011.5.25.129.1.9ScalarhwBaseFlowDirectionTypeaccessible-for-notifycurrentThe direction of data flow is specified.
1.3.6.1.4.1.2011.5.25.129.1.10ScalarhwPowerDirectionaccessible-for-notifycurrentThe direction of photoelectric power.
1.3.6.1.4.1.2011.5.25.129.1.11ScalarhwBaseTrapTrafficDiraccessible-for-notifycurrentThe traffic flows in or out of the port.
1.3.6.1.4.1.2011.5.25.129.1.12ScalarhwEntityRatedPoweraccessible-for-notifycurrentThe rated power of board.
1.3.6.1.4.1.2011.5.25.129.1.13ScalarhwDevAvailablePoweraccessible-for-notifycurrentAvailable power of the device.
1.3.6.1.4.1.2011.5.25.129.1.14ScalarhwDeviceTotalPoweraccessible-for-notifycurrentTotal power of the device.
1.3.6.1.4.1.2011.5.25.129.1.15ScalarhwBaseTrapCurPortTypeaccessible-for-notifycurrentThe current type of port.
1.3.6.1.4.1.2011.5.25.129.1.16ScalarhwBaseTrapLastPortTypeaccessible-for-notifycurrentThe last type of port.
1.3.6.1.4.1.2011.5.25.129.1.17ScalarhwPortPhysicalDownReasonaccessible-for-notifycurrentAUAIS: The RX detects administrative(A) unit(U) alarm(A) indication(I) signal(S). B1TCA: The RX detects b1(B1) threshold(T) crossing(C) alarm(A). B2TCA: The RX…
1.3.6.1.4.1.2011.5.25.129.1.18ScalarhwEntBandwidthModeread-onlycurrentThe bandwidth mode of card.
1.3.6.1.4.1.2011.5.25.129.2NodehwBaseTraps
1.3.6.1.4.1.2011.5.25.129.2.1NodehwEntityTrap
1.3.6.1.4.1.2011.5.25.129.2.1.1NotificationhwEntityRemovecurrentEntity has been removed.
1.3.6.1.4.1.2011.5.25.129.2.1.2NotificationhwEntityInsertcurrentEntity has been inserted.
1.3.6.1.4.1.2011.5.25.129.2.1.3NotificationhwEntityUnstablecurrentEntity has been inserted but position unstable.
1.3.6.1.4.1.2011.5.25.129.2.1.4NotificationhwEntityUnstableResumecurrentResume from entity position unstable situation.
1.3.6.1.4.1.2011.5.25.129.2.1.5NotificationhwEntityResetcurrentEntity will be reseted.
1.3.6.1.4.1.2011.5.25.129.2.1.6NotificationhwEntityResetDonecurrentEntity has been reseted and in good health now.
1.3.6.1.4.1.2011.5.25.129.2.1.7NotificationhwEntityCommunicateErrorcurrentCommunication error has been detected. Include all kinds of communication error between boards.
1.3.6.1.4.1.2011.5.25.129.2.1.8NotificationhwEntityCommunicateResumecurrentResume from communication error situation.
1.3.6.1.4.1.2011.5.25.129.2.1.9NotificationhwEntityInvalidcurrentEntity is invalid for some reason.
1.3.6.1.4.1.2011.5.25.129.2.1.10NotificationhwEntityResumecurrentEntity reusme from invalid situation.
1.3.6.1.4.1.2011.5.25.129.2.1.11NotificationhwEntityLeaveMastercurrentRedundant entity leave master role.
1.3.6.1.4.1.2011.5.25.129.2.1.12NotificationhwEntityBecomeMastercurrentRedundant entity become master role.
1.3.6.1.4.1.2011.5.25.129.2.1.13NotificationhwEntityOfflinecurrentEntity change to OFFLINE status.
1.3.6.1.4.1.2011.5.25.129.2.1.14NotificationhwEntityOnlinecurrentEntity change to ONLINE status.
1.3.6.1.4.1.2011.5.25.129.2.1.15NotificationhwEntityCheckFailcurrentFailure of self-check occurs to the board
1.3.6.1.4.1.2011.5.25.129.2.1.16NotificationhwEntityCheckResumecurrentThe status is recovered from the failure of board self-check
1.3.6.1.4.1.2011.5.25.129.2.1.17NotificationhwEntityRegFailcurrentEntity fail in registration.
1.3.6.1.4.1.2011.5.25.129.2.1.18NotificationhwEntityRegSuccesscurrentEntity success in registration.
1.3.6.1.4.1.2011.5.25.129.2.1.19NotificationhwEntityDyingGaspcurrentDying gasp event is occurred.
1.3.6.1.4.1.2011.5.25.129.2.1.20NotificationhwEntityBandwidthModeChangecurrentThe bandwidth mode of physical entity is changed.
1.3.6.1.4.1.2011.5.25.129.2.2NodehwEnvironmentTrap
1.3.6.1.4.1.2011.5.25.129.2.2.1NotificationhwTempRisingAlarmcurrentTemperature rise over HIGH threshold.
1.3.6.1.4.1.2011.5.25.129.2.2.2NotificationhwTempRisingResumecurrentTemperature back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.2.3NotificationhwTempFallingAlarmcurrentTemperature fall below LOW threshold.
1.3.6.1.4.1.2011.5.25.129.2.2.4NotificationhwTempFallingResumecurrentTemperature back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.2.5NotificationhwHumidityRisingAlarmcurrentHumidity rise over HIGH threshold.
1.3.6.1.4.1.2011.5.25.129.2.2.6NotificationhwHumidityRisingResumecurrentHumidity back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.2.7NotificationhwHumidityFallingAlarmcurrentHumidity fall below LOW threshold.
1.3.6.1.4.1.2011.5.25.129.2.2.8NotificationhwHumidityFallingResumecurrentHumidity back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.2.9NotificationhwVoltRisingAlarmcurrentVoltage of power rise over HIGH threshold.
1.3.6.1.4.1.2011.5.25.129.2.2.10NotificationhwVoltRisingResumecurrentVoltage back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.2.11NotificationhwVoltFallingAlarmcurrentVoltage of power fall below LOW threshold.
1.3.6.1.4.1.2011.5.25.129.2.2.12NotificationhwVoltFallingResumecurrentVoltage back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.2.13NotificationhwCurrentRisingAlarmcurrentCurrent rise over HIGH threshold.
1.3.6.1.4.1.2011.5.25.129.2.2.14NotificationhwCurrentRisingResumecurrentCurrent back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.2.15NotificationhwCurrentFallingAlarmcurrentCurrent fall below LOW threshold.
1.3.6.1.4.1.2011.5.25.129.2.2.16NotificationhwCurrentFallingResumecurrentCurrent back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.2.17NotificationhwPowerRisingAlarmcurrentPhotoelectric power rise over HIGH threshold.
1.3.6.1.4.1.2011.5.25.129.2.2.18NotificationhwPowerRisingResumecurrentPhotoelectric power back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.2.19NotificationhwPowerFallingAlarmcurrentPhotoelectric power fall below LOW threshold.
1.3.6.1.4.1.2011.5.25.129.2.2.20NotificationhwPowerFallingResumecurrentPhotoelectric power back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.2.21NotificationhwPowerInsufficiencyAlarmcurrentThe available power of device is not enough for the board.
1.3.6.1.4.1.2011.5.25.129.2.2.22NotificationhwPowerInsufficiencyResumecurrentThe available power of device becomes sufficient for the board.
1.3.6.1.4.1.2011.5.25.129.2.2.23NotificationhwAcuSoftwareUpgradeFailurecurrentACU current startup system software and next startup system software are difference.
1.3.6.1.4.1.2011.5.25.129.2.3NodehwPowerTrap
1.3.6.1.4.1.2011.5.25.129.2.3.1NotificationhwPowerOffcurrentOne of the power is shutting down.
1.3.6.1.4.1.2011.5.25.129.2.3.2NotificationhwPowerOncurrentOne of the power is starting up.
1.3.6.1.4.1.2011.5.25.129.2.3.3NotificationhwPowerMixedcurrentThe power is not of the same type!
1.3.6.1.4.1.2011.5.25.129.2.3.4NotificationhwPowerMixedResumecurrentThe power is changed to the same type!
1.3.6.1.4.1.2011.5.25.129.2.4NodehwCPUTrap
1.3.6.1.4.1.2011.5.25.129.2.4.1NotificationhwCPUUtilizationRisingAlarmcurrentCPU utilization exceed threshold.
1.3.6.1.4.1.2011.5.25.129.2.4.2NotificationhwCPUUtilizationResumecurrentCPU utilization back to normal level.
1.3.6.1.4.1.2011.5.25.129.2.5NodehwPortTrap
1.3.6.1.4.1.2011.5.25.129.2.5.1NotificationhwPortPhysicalDowncurrentOne of the port physical connect down.
1.3.6.1.4.1.2011.5.25.129.2.5.2NotificationhwPortPhysicalUpcurrentOne of the port physical connect up.
1.3.6.1.4.1.2011.5.25.129.2.5.3NotificationhwPortPhysicalNoTrafficAlarmcurrentOne of the port has none traffic.
1.3.6.1.4.1.2011.5.25.129.2.5.4NotificationhwPortPhysicalNoTrafficClearcurrentOne of the port traffic resume.
1.3.6.1.4.1.2011.5.25.129.2.5.5NotificationhwPortPhysicalTrafficRisingAlarmcurrentOne of the port traffic rise over threshold.
1.3.6.1.4.1.2011.5.25.129.2.5.6NotificationhwPortPhysicalTrafficClearcurrentOne of the port traffic resume to normal level.
1.3.6.1.4.1.2011.5.25.129.2.5.7NotificationhwPortPhysicalCrcErrorRisingAlarmcurrentOne of the port CRC error rise over threshold.
1.3.6.1.4.1.2011.5.25.129.2.5.8NotificationhwPortPhysicalCrcErrorClearcurrentOne of the port CRC error resume to normal level.
1.3.6.1.4.1.2011.5.25.129.2.5.9NotificationhwPortPhysicalEthBroadcastRisingAlarmcurrentOne of the Ethernet port broadcast rise over threshold.
1.3.6.1.4.1.2011.5.25.129.2.5.10NotificationhwPortPhysicalEthBroadcastClearcurrentOne of the Ethernet port broadcast resume to normal level.
1.3.6.1.4.1.2011.5.25.129.2.5.11NotificationhwPortPhysicalEthHalfDuplexAlarmcurrentOne of the Ethernet port works on the half-duplex mode.
1.3.6.1.4.1.2011.5.25.129.2.5.12NotificationhwPortPhysicalEthFullDuplexClearcurrentOne of the Ethernet port works on the full-duplex mode.
1.3.6.1.4.1.2011.5.25.129.2.5.13NotificationhwPortPhysicalPortTypeChangecurrentOne of the port type changed.
1.3.6.1.4.1.2011.5.25.129.2.5.14NotificationhwPortPhysicalAutoNegotiateFailcurrentOne of the port auto-negotiation failed.
1.3.6.1.4.1.2011.5.25.129.2.5.15NotificationhwPortPhysicalAutoNegotiateResumecurrentOne of the port auto-negotiation resumed.
1.3.6.1.4.1.2011.5.25.129.2.6NodehwStorageTrap
1.3.6.1.4.1.2011.5.25.129.2.6.1NotificationhwStorageUtilizationRisingAlarmcurrentStorage device utilization rise over threshold.
1.3.6.1.4.1.2011.5.25.129.2.6.2NotificationhwStorageUtilizationResumecurrentStorage utilization resume to normal level.
1.3.6.1.4.1.2011.5.25.129.2.6.3NotificationhwVsDiskFullAlarmcurrentThe disk usage exceeded the overload threadhold.
1.3.6.1.4.1.2011.5.25.129.2.6.4NotificationhwVsDiskResumecurrentThe disk usage fall below the clear threashold.
1.3.6.1.4.1.2011.5.25.129.2.7NodehwClockTrap
1.3.6.1.4.1.2011.5.25.129.2.8NodehwFanTrap
1.3.6.1.4.1.2011.5.25.129.2.9NodehwFibTrap
1.3.6.1.4.1.2011.5.25.129.2.9.1NotificationhwFIBOverloadSuspendcurrentThe board is suspended for IPv4/IPv6 FIB capability overload.
1.3.6.1.4.1.2011.5.25.129.2.9.2NotificationhwFIBOverloadSusResumecurrentThe board is recovered for FIB capability overload suspend.
1.3.6.1.4.1.2011.5.25.129.2.9.3NotificationhwFIBOverloadForwardcurrentThe board is forwarding for IPv4/IPv6 FIB capability overload.
1.3.6.1.4.1.2011.5.25.129.2.9.4NotificationhwFIBOverloadFwResumecurrentThe board is recovered for IPv4/IPv6 FIB capability overload forward.
1.3.6.1.4.1.2011.5.25.129.2.9.5NotificationhwFESInconsistencyForMemoryLackcurrentBecause the memory usage of the interface board exceeds the upper threshold, the FES cannot add new entries. As a result, the entries of the interface board is…
1.3.6.1.4.1.2011.5.25.129.2.9.6NotificationhwFESInconsistencyForMemoryLackResumecurrentThe memory usage of the interface board reduces to the lower threshold, and the FES can add entries. The entries of the interface board is consistent with thos…
1.3.6.1.4.1.2011.5.25.129.2.10NodehwPppTrap
1.3.6.1.4.1.2011.5.25.129.2.10.1NotificationhwPppLoopbackDetectcurrentThe interface Loopback is detected.
1.3.6.1.4.1.2011.5.25.129.2.10.2NotificationhwPppLoopbackDetResumecurrentThe interface is recovered from Loopback.
1.3.6.1.4.1.2011.5.25.129.2.11NodehwFlowControlTrap
1.3.6.1.4.1.2011.5.25.129.2.11.1NotificationhwFlowCongestioncurrentThe object is in congested state and some of the frames are dropped.
1.3.6.1.4.1.2011.5.25.129.2.11.2NotificationhwFlowCongestionResumecurrentAlarms of the congested object are cleared.
1.3.6.1.4.1.2011.5.25.129.2.12NodehwDeviceAbnormalTrap
1.3.6.1.4.1.2011.5.25.129.2.12.1NotificationhwDeviceAbnormalRisingAlarmcurrentDevice abnormal or pulled out.
1.3.6.1.4.1.2011.5.25.129.2.13NodehwResExhaustBfdTrap
1.3.6.1.4.1.2011.5.25.129.2.13.1NotificationhwResExhaustBfdAlarmcurrentFailed to allocate resources for BFD because hardware resources were exhausted.
1.3.6.1.4.1.2011.5.25.129.2.13.2NotificationhwResExhaustBfdResumecurrentBFD recovered from alarms of hardware resources exhausting.
1.3.6.1.4.1.2011.5.25.129.2.14NodehwResExhaustOamTrap
1.3.6.1.4.1.2011.5.25.129.2.14.1NotificationhwResExhaustOamAlarmcurrentFailed to allocate resources for OAM because hardware resources were exhausted. MPLS OAM is short for Operation Administration and Maintenance by MPLS. It is u…
1.3.6.1.4.1.2011.5.25.129.2.14.2NotificationhwResExhaustOamResumecurrentOAM recovered from alarms of hardware resources exhausting. MPLS OAM is short for Operation Administration and Maintenance by MPLS. It is used for connectivity…
1.3.6.1.4.1.2011.5.25.129.2.15NodehwHdlcTrap
1.3.6.1.4.1.2011.5.25.129.2.15.1NotificationhwHdlcLoopbackDetectcurrentThe interface Loopback is detected.
1.3.6.1.4.1.2011.5.25.129.2.15.2NotificationhwHdlcLoopbackDetResumecurrentThe interface is recovered from Loopback.
1.3.6.1.4.1.2011.5.25.129.2.15.3NotificationhwHdlcIICPacketCrcErrcurrentThe packet(s) crc error
1.3.6.1.4.1.2011.5.25.129.2.16NodehwAutoFtpTrap
1.3.6.1.4.1.2011.5.25.129.2.16.1NotificationhwAutoFtpFailAlarmcurrentThis object indicates the software failure in the automatic upgrade system.
1.3.6.1.4.1.2011.5.25.129.2.17NodehwBaseOpticalTrap
1.3.6.1.4.1.2011.5.25.129.2.17.1NotificationhwOpticalPowerAbnormalcurrentOptical rxpower or txpower is exceed threshold value.
1.3.6.1.4.1.2011.5.25.129.2.17.2NotificationhwOpticalPowerResumecurrentOptical power resume.
1.3.6.1.4.1.2011.5.25.129.3NodehwBaseTrapConformance
1.3.6.1.4.1.2011.5.25.129.3.1NodehwBaseTrapCompliances
1.3.6.1.4.1.2011.5.25.129.3.1.1CompliancehwBaseTrapCompliancecurrentCompliance statement for agents that provide full support for hwBaseTrapMIB.
1.3.6.1.4.1.2011.5.25.129.3.2NodehwBaseTrapGroups
1.3.6.1.4.1.2011.5.25.129.3.2.1GrouphwBaseObjectGroupcurrentGroup for base trap objects.
1.3.6.1.4.1.2011.5.25.129.3.2.2GrouphwBaseTrapGroupcurrentGroup for all base traps.
MIB Viewer