HUAWEI-BFD-MIB
226 objects
MIB interface of BFD protocol configuration. The Bidirectional Forwarding Detection (BFD) protocol is standardized by the IETF. BFD detects the traffic forwarding capability of the link or system by quickly sending BFD control packets (the UDP packets in a specified format) at intervals between two nodes.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| IPV6-TC | Ipv6Address |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.38 | IdentityhwBFDMIB | MIB interface of BFD protocol configuration. The Bidirectional Forwarding Detection (BFD) protocol is standardized by the IETF. BFD detects the traffic forward… | ||
| 1.3.6.1.4.1.2011.5.25.38.1 | NodehwBfdScalarsObjects | |||
| 1.3.6.1.4.1.2011.5.25.38.1.1 | ScalarhwBfdVersionNumber | read-only | current | The current version number of the BFD protocol is 1. Default: 1 |
| 1.3.6.1.4.1.2011.5.25.38.1.2 | ScalarhwBfdAdminStatus | read-write | current | Describe the administrative status of a BFD protocol. Options: 1. enabled(1) -denotes that the BFD Process is active on all interface 2. disabled(2) -denotes t… |
| 1.3.6.1.4.1.2011.5.25.38.1.3 | ScalarhwBfdSessLimitNumber | read-only | current | Define the maximum number of BFD sessions allowed in the logic router. Default: 0 |
| 1.3.6.1.4.1.2011.5.25.38.1.4 | ScalarhwBfdSessInterfaceLimitNumber | read-only | current | Define the maximum number of BFD sessions allowed per board. Default: 0 |
| 1.3.6.1.4.1.2011.5.25.38.1.5 | ScalarhwBfdSessStaticNumber | read-only | current | The total number of BFD static sessions. Default: 0 |
| 1.3.6.1.4.1.2011.5.25.38.1.6 | ScalarhwBfdSessDynamicNumber | read-only | current | The total number of BFD dynamic sessions. Default: 0 |
| 1.3.6.1.4.1.2011.5.25.38.1.7 | ScalarhwBfdSessGlobalDefaultIpAddr | read-write | current | Define the default multicast IP address used in BFD multicast detection. Default: 224.0.0.184 |
| 1.3.6.1.4.1.2011.5.25.38.1.8 | ScalarhwBfdEchoPassiveStatus | read-write | current | The passive Echo function of BFD. Options: 1. enabled(1) -denotes that the BFD EchoPassive capability is enabled 2. disabled(2) -denotes that the BFD EchoPassi… |
| 1.3.6.1.4.1.2011.5.25.38.1.9 | ScalarhwBfdEchoAclNum | read-write | current | The Acl Number for passive Echo function of BFD. Default: 0 |
| 1.3.6.1.4.1.2011.5.25.38.1.10 | ScalarhwBfdSessDynamicPingInterval | read-write | current | Define the sending interval of the MPLS echo packet. Default: 60 Unit: second |
| 1.3.6.1.4.1.2011.5.25.38.1.11 | ScalarhwBfdSessDynamicSupportPassive | read-write | current | The capability of automatically creating BFD sessions on the LSP egress. Options: 1. enabled(1) -denotes that the egress can create BFD sessions 2. disabled(2)… |
| 1.3.6.1.4.1.2011.5.25.38.1.12 | ScalarhwBfdSessDelayUpTime | read-write | current | Define delay interval before the session turns to up. Unit: second Default: 0 |
| 1.3.6.1.4.1.2011.5.25.38.1.13 | ScalarhwBfdSessMultiDstPort | read-write | current | The destination UDP port of multi-hop BFD session. When the administrative status of BFD protocol is disabled, this value will be 0. Default: 3784 |
| 1.3.6.1.4.1.2011.5.25.38.1.14 | ScalarhwBfdTrapSendInterval | read-write | current | Define the sending interval of TRAP message. Unit: second Default: 120 |
| 1.3.6.1.4.1.2011.5.25.38.1.15 | ScalarhwBfdLimitDeviceName | read-only | current | The device name which session number reached up limit. |
| 1.3.6.1.4.1.2011.5.25.38.1.16 | ScalarhwBfdDynamicSessionTos | read-write | current | The Tos-Exp of dynamic session. Default: 7 |
| 1.3.6.1.4.1.2011.5.25.38.1.17 | ScalarhwBfdStaticSessionTos | read-write | current | The Tos-Exp of static session. Default: 7 |
| 1.3.6.1.4.1.2011.5.25.38.1.18 | ScalarhwBfdDynamicSessionTosEx | read-write | current | The extended Tos-Exp of dynamic session. Default: 7 |
| 1.3.6.1.4.1.2011.5.25.38.1.19 | ScalarhwBfdSessCfgRemoteFailType | accessible-for-notify | current | The virtual access AP notify process bfd session configuration failed. Options: 1. localDiscriminatorNonsupport(101) 2. localDiscriminatorConflict(102) |
| 1.3.6.1.4.1.2011.5.25.38.2 | NodehwBfdObjects | |||
| 1.3.6.1.4.1.2011.5.25.38.2.1 | TablehwBfdIfConfTable | not-accessible | current | The interface configuration table of BFD. The index of this table is hwBfdIfConfIndex. |
| 1.3.6.1.4.1.2011.5.25.38.2.1.1 | RowhwBfdIfConfEntry | not-accessible | current | The interface configuration table of BFD. The index of this entry is hwBfdIfConfIndex. |
| 1.3.6.1.4.1.2011.5.25.38.2.1.1.1 | ColumnhwBfdIfConfIndex | not-accessible | current | It is the configuration index of this interface. This index is automatically allocated inside the system and is not user-configurable. |
| 1.3.6.1.4.1.2011.5.25.38.2.1.1.2 | ColumnhwBfdIfConfName | read-create | current | It is the name of this Interface. |
| 1.3.6.1.4.1.2011.5.25.38.2.1.1.3 | ColumnhwBfdIfConfEnable | read-only | current | The flag whether the interface has enabled BFD. Options: 1. disable(0) -Indicates that the interface has disabled BFD 2. enable(1) -Indicates that the interfac… |
| 1.3.6.1.4.1.2011.5.25.38.2.1.1.4 | ColumnhwBfdIfConfDeleting | read-only | current | The flag that whether the interface is in deleting. Options: 1. notDeleted(0) -the interface is not deleted 2. deleted(1) -the interface is deleted |
| 1.3.6.1.4.1.2011.5.25.38.2.1.1.5 | ColumnhwBfdIfConfAvailable | read-only | current | The flag that whether the interface is available. Options: 1. notAvailable(0) -the interface is not available 2. available(1) -the interface is available |
| 1.3.6.1.4.1.2011.5.25.38.2.1.1.6 | ColumnhwBfdIfConfSessCnt | read-only | current | The number of sessions that has been bound to this interface. |
| 1.3.6.1.4.1.2011.5.25.38.2.1.1.7 | ColumnhwBfdIfConfRowStatus | read-create | current | Used to manage the creation and deletion of conceptual rows. |
| 1.3.6.1.4.1.2011.5.25.38.2.2 | TablehwBfdSessionConfTable | not-accessible | current | BFD Session Configuration Table. Use this table to get/configure BFD sessions. The index of this table is hwBfdSessConfName. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1 | RowhwBfdSessionConfEntry | not-accessible | current | BFD Session Configuration Table. Use this table to get/configure BFD sessions. The index of this entry is hwBfdSessConfName. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.1 | ColumnhwBfdSessConfName | not-accessible | current | It is the name of this configuration model. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.2 | ColumnhwBfdSessConfMIndex | read-only | current | It is the configuration index of this session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.3 | ColumnhwBfdSessConfLocalDiscr | read-create | current | Define the local discriminator of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.4 | ColumnhwBfdSessConfRemoteDiscr | read-create | current | Define the remote discriminator of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.5 | ColumnhwBfdSessConfPeerAddr | read-create | current | Define the IP address of the peer in the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.6 | ColumnhwBfdSessConfBindIfIndex | read-only | current | It is the index of the binding interface in the BFD configuration. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.7 | ColumnhwBfdSessConfBindIfName | read-create | current | It is the name of the binding interface in the BFD configuration. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.8 | ColumnhwBfdSessConfDemandEnable | read-create | current | It is the flag of the BFD demand mode. Options: 1. disabled(0) -disable the BFD demand mode 2. enabled(1) -enable the BFD demand mode |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.9 | ColumnhwBfdSessConfDemandTimerInterval | read-create | current | Define the detecting interval in the BFD session with the demand mode. Unit: millisecond |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.10 | ColumnhwBfdSessConfDetectMult | read-create | current | It is Detect time multiplier of the configuration. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.11 | ColumnhwBfdSessConfDesiredMinRxInterval | read-create | current | This is the minimum interval of the configuration,in milliseconds, between received BFD Control packets that this system is capable of supporting. Unit: millis… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.12 | ColumnhwBfdSessConfDesiredMinTxInterval | read-create | current | This is the minimum interval of the configuration, in milliseconds, that the local system would like to use when transmitting BFD Control packets. Unit: millis… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.13 | ColumnhwBfdSessConfWTRInterval | read-create | current | The wait-to-restore (WTR) time of the BFD session. The event that indicates the session changing into the Up state is reported to the application program only … |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.14 | ColumnhwBfdSessConfTOS | read-create | current | This is the TOS value of bfd packet. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.15 | ColumnhwBfdSessConfPSTFlag | read-create | current | The PST flag of the BFD session configuration. It indicates the status association between the current BFD session and the interface bound to the session. Opti… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.16 | ColumnhwBfdSessConfCommitFlag | read-create | current | It is the commit flag of the configuration entry. Options: 1. notCommit(0) -not commit 2. commit(1) -commit |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.17 | ColumnhwBfdSessConfAdminStatus | read-create | current | A BFD session can be administratively enabled or disabled. The AdminStatus field indicates the BFD session status. Options: 1. 0 -disable 2. 1 -enable |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.18 | ColumnhwBfdSessConfRowStatus | read-create | current | Used to manage the creation and deletion of conceptual rows. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.19 | ColumnhwBfdSessConfSourceAddr | read-create | current | Define the source IP address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.20 | ColumnhwBfdSessConfVrfIndex | read-only | current | The index of the VPN interface. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.21 | ColumnhwBfdSessConfVPNName | read-create | current | The name of VPN interface. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.22 | ColumnhwBfdSessConfDefaultIp | read-create | current | BFD session use default multicast IP as the detect peer-ip Options: 1. no(1) -do not use the default multicast IP 2. yes(2) -use the default multicast IP |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.23 | ColumnhwBfdSessConfPISFlag | read-create | current | The state of BFD session is associated with the state of the binding interface Options: 1. false(1) -do not associate with interface state 2. true(2) -associat… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.24 | ColumnhwBfdSessConfBindType | read-create | current | The binding type of the BFD session. Options: 1. interfaceIp(1) -BFD for IP with peer-ip and interface 2. peerIp(2) -BFD for IP only with peer-ip 3. sourceIp(3… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.25 | ColumnhwBfdSessConfNextHop | read-create | current | It is the next hop of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.26 | ColumnhwBfdSessConfStaticLspName | read-create | current | It is the static LSP name of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.27 | ColumnhwBfdSessConfPWSecondaryFlag | read-create | current | The role of the PW bound with BFD session. Options: 1. flagMasterPW(1) -master PW 2. flagSecondaryPW(2)-secondary PW 3. flagNoPW(3) -no PW |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.28 | ColumnhwBfdSessConfTunnelDetectType | read-create | current | Set the failure notifies policy type. Options: 1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down 2. flagNeighborDown(2)… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.29 | ColumnhwBfdSessConfVcId | read-create | current | It is the ID of VC. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.30 | ColumnhwBfdSessConfVsiName | read-create | current | It is the name of VSI. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.31 | ColumnhwBfdSessConfVsiPeerAddr | read-create | current | It is the peer-ip of VSI. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.32 | ColumnhwBfdSessConfDiscrAuto | read-create | current | Describe whether the discriminator can be auto allocated. Options: 1.enabled(1) -the discriminator can be allocated automatically 2.disabled(2) -the discrimina… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.33 | ColumnhwBfdSessConfPeerIpv6Addr | read-create | current | Define the peer IPv6 address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.34 | ColumnhwBfdSessConfSourceIpv6Addr | read-create | current | Define the source IPv6 address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.35 | ColumnhwBfdSessConfIpv6NextHop | read-only | current | It is the next hop of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.36 | ColumnhwBfdSessConfIsIpv6Addr | read-create | current | Whether the peer address of the BFD session is IPv6 address. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.37 | ColumnhwBfdSessConfKeychainName | read-create | current | Specify the name of the keychain for authentication. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.38 | ColumnhwBfdSessConfMeticulous | read-create | current | Whether enable meticulous authentication for MD5 or SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type 2. disabled(2) -… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.39 | ColumnhwBfdSessConfLooseAuthentication | read-create | current | Whether loose authentication check. Options: 1.True(1) -loose-check 2.False(2) -do not loose-check |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.40 | ColumnhwBfdSessConfOneArmEcho | read-create | current | The value of this object identifies whether a session works in one-arm-echo mode. Options: 1. enabled(1) -indicates that the session works in one-arm-echo mode… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.41 | ColumnhwBfdSessConfMinEchoRxInterval | read-create | current | The value of this object identifies the minimum interval between received BFD Control packets, in milliseconds.This value reflects the capability of receiving … |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.42 | ColumnhwBfdSessConfPWTtlMode | read-create | current | The value of this object identifies the configuration mode of a TTL used by the BFD session for PW. Options: 1. config(1) -indicates that the TTL is manually s… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.43 | ColumnhwBfdSessConfPWTtl | read-create | current | The value of this object identifies the TTL used by the BFD session for PW. The vlaue is configurable only when the configuration mode of a TTL is config. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.44 | ColumnhwBfdSessConfRemotePeerIpType | read-create | current | The value of this object identifies the type of the destination address of the BFD session for PW. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.45 | ColumnhwBfdSessConfRemotePeerIp | read-create | current | The value of this object identifies the destination IP address of the BFD session for PW. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.46 | ColumnhwBfdSessConfSelectBoard | read-create | current | This object indicates the main processing board of a BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.47 | ColumnhwBfdSessConfPWSPE | read-create | current | The value of this object identifies the node on which a BFD session is set up. The values are as follows. Options: 1. upe(1) -indicates that a BFD session is s… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.48 | ColumnhwBfdSessConfPWTrackIfName | read-create | current | This object indicates the interface monitored by the BFD session for PW. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.49 | ColumnhwBfdSessConfIsPWTrackIf | read-create | current | The value of this object identifies whether the BFD session for PW monitors an interface. The values are as follows. Options: 1. enabled(1) -enables the BFD se… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.50 | ColumnhwBfdSessConfEncapsulationType | read-create | current | The value of this object identifies the VC encapsulation type on an SPE. The values are as follows: fr atm-aal5-sdu atm-trans-cell vlan ethernet hdlc ppp atm-n… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.51 | ColumnhwBfdSessConfPEVid | read-create | current | The value of this object identifies the outer tag of a sub-interface for QinQ VLAN tag termination or the VLAN ID of a sub-interface for dot1q VLAN tag termina… |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.52 | ColumnhwBfdSessConfCEVid | read-create | current | The value of this object identifies the inner tag in QinQ packets. |
| 1.3.6.1.4.1.2011.5.25.38.2.2.1.53 | ColumnhwBfdSessConfTOSEx | read-create | current | This is the extended TOS value of bfd packet. |
| 1.3.6.1.4.1.2011.5.25.38.2.3 | TablehwBfdSessionTable | not-accessible | current | The BFD Session Table describes the BFD sessions. The index of this table is hwBfdSessIndex. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1 | RowhwBfdSessionEntry | not-accessible | current | The BFD Session Table describes the BFD sessions. The index of this entry is hwBfdSessIndex. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.1 | ColumnhwBfdSessIndex | accessible-for-notify | current | It is unique and the Index of this session. This index is automatically allocated inside the system and is not user-configurable. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.2 | ColumnhwBfdSessMIndex | read-only | current | This value indicate the configuration has Main Index. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.3 | ColumnhwBfdSessBindVRRP | read-only | current | Describe the capability of bound with VRRP for the BFD session. Options: 1. notBind(0) -not bind 2. bind(1) -bind |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.4 | ColumnhwBfdSessCfgName | read-only | current | This indicate the name of the session which will be display course information or statistic information of the session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.5 | ColumnhwBfdSessPeerAddr | read-only | current | Define the peer IP address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.6 | ColumnhwBfdSessBindIfIndex | read-only | current | It is the index of the binding interface in the BFD session |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.7 | ColumnhwBfdSessBindIfName | read-only | current | It is the name of the binding interface in the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.8 | ColumnhwBfdSessLocalDiscr | read-only | current | A unique, nonzero discriminator value generated by the transmitting system, used to demultiplex multiple BFD sessions between the same pair of system. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.9 | ColumnhwBfdSessRemoteDiscr | read-only | current | The discriminator received from the corresponding remote system. This field reflects back the received value of My Discriminator, or is zero if that value is u… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.10 | ColumnhwBfdSessOperMode | read-only | current | Describe the current operating mode configured with the BFD session. Options: 1. 0 -asynchronous mode with echo function 2. 1 -asynchronous mode without echo f… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.11 | ColumnhwBfdSessDetectMult | read-only | current | Detect time multiplier. The negotiated transmit interval, multiplied by this value, provides the detection time for the transmitting system in Asynchronous mod… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.12 | ColumnhwBfdSessDemandTimerInterval | read-only | current | It is the detecting interval in the BFD session with the demand mode. Unit: millisecond |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.13 | ColumnhwBfdSessActualRxInterval | read-only | current | This is the minimum interval, in milliseconds, between received BFD Control packets that this system is capable of supporting. Unit: millisecond |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.14 | ColumnhwBfdSessActualTxInterval | read-only | current | This is the minimum interval, in milliseconds, that the local system would like to use when transmitting BFD Control packets. Unit: millisecond |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.15 | ColumnhwBfdSessWTRInterval | read-only | current | The WTR interval of the BFD session. Unit: minute |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.16 | ColumnhwBfdSessTOS | read-only | current | This is the TOS value of bfd packet. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.17 | ColumnhwBfdSessState | read-only | current | Describe the current state of the BFD session. Options: 1. 0 -admin down 2. 1 -down 3. 2 -init 4. 3 -up |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.18 | ColumnhwBfdSessDiag | read-only | current | A diagnostic code specifying the local system's reason for the last session state change. Options: 1. 0 -no diagnostic 2. 1 -control detection time expired 3. … |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.19 | ColumnhwBfdSessSourceAddr | read-only | current | The source address of the session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.20 | ColumnhwBfdSessVrfIndex | read-only | current | The index of the VPN interface. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.21 | ColumnhwBfdSessVPNName | read-only | current | The name of VPN interface. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.22 | ColumnhwBfdSessType | read-only | current | The type of the BFD session. Options: 1. static(1) -static 2. dynamic(2) -dynamic 3. entireDynamic(3) -entire dynamic 4. auto(4) -auto |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.23 | ColumnhwBfdSessBindAppType | read-only | current | The Application type that this BFD session has been bound to Options: 1. noApplication(1) -No application 2. vrrp(2) -VRRP 3. ifnet(3) -IFNET 4. vrrpAndIfnet(4… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.24 | ColumnhwBfdSessDefaultIp | read-only | current | BFD session use default multicast IP as the detect peer-ip Options: 1. no(1) -do not use the default multicast IP 2. yes(2) -use the default multicast IP |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.25 | ColumnhwBfdSessPISFlag | read-only | current | The state of BFD session is associated with the state of the binding interface Options: 1. false(1) -do not associate with interface state 2. true(2) -ssociate… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.26 | ColumnhwBfdSessBindType | read-only | current | The binding type of the BFD session. Options: 1. interfaceIp(1) -BFD for IP with peer-ip and interface 2. peerIp(2) -BFD for IP only with peer-ip 3. sourceIp(3… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.27 | ColumnhwBfdSessNextHop | read-only | current | It is the next hop of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.28 | ColumnhwBfdSessStaticLspName | read-only | current | It is the static LSP name of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.29 | ColumnhwBfdSessLspIndex | read-only | current | It is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.30 | ColumnhwBfdSessPWSecondaryFlag | read-only | current | The role of the PW bound with BFD session. Options: 1. flagMasterPW(1) -master PW 2. flagSecondaryPW(2) -secondary PW 3. flagNoPW(3) -no PW Default: 1 |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.31 | ColumnhwBfdSessTunnelDetectType | read-only | current | Set the failure notifies policy type. Options: 1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down 2. flagNeighborDown(2)… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.32 | ColumnhwBfdSessVcId | read-only | current | It is the ID of VC. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.33 | ColumnhwBfdSessVsiName | read-only | current | It is the name of VSI. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.34 | ColumnhwBfdSessVsiPeerAddr | read-only | current | It is the peer-ip of VSI. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.35 | ColumnhwBfdSessDiscrAuto | read-only | current | Describe whether the discriminator can be auto allocated. Options: 1. enabled(1) -the discriminator can be allocated automatically 2. disabled(2) -the discrimi… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.36 | ColumnhwBfdSessPeerIpv6Addr | read-only | current | Define the peer IPv6 address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.37 | ColumnhwBfdSessSourceIpv6Addr | read-only | current | Define the source IPv6 address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.38 | ColumnhwBfdSessIpv6NextHop | read-only | current | It is the next hop of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.39 | ColumnhwBfdSessIsIPv6Addr | read-only | current | Whether the peer address of the BFD session is IPv6 address. Default: false |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.40 | ColumnhwBfdSessMeticulous | read-only | current | Whether enable meticulous authentication for MD5 or SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type 2. disabled(2) -… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.41 | ColumnhwBfdSessLooseAuthentication | read-only | current | Whether loose authentication check. Options: 1. True(1) -loose-check 2. False(2) -do not loose-check Default: false |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.42 | ColumnhwBfdSessAuthenticationStatus | read-only | current | Authentication status of the bfd session Options: 1. 0 -authentication disable 2. 1 -interface board do not support bfd authentication 3. 2 -keychain does not … |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.43 | ColumnhwBfdSessOneArmEcho | read-only | current | The value of this object identifies whether a session works in one-arm-echo mode. Options: 1. enabled(1) -indicates that the session works in one-arm-echo mode… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.44 | ColumnhwBfdSessPWTtlMode | read-only | current | The value of this object identifies the configuration mode of a TTL used by the BFD session for PW. Options: 1. config(1) -indicates that the TTL is manually s… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.45 | ColumnhwBfdSessPWTtl | read-only | current | The value of this object identifies the TTL used by the BFD session for PW. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.46 | ColumnhwBfdSessRemotePeerIpType | read-only | current | The value of this object identifies the type of the destination address of the BFD session for PW. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.47 | ColumnhwBfdSessRemotePeerIp | read-only | current | The value of this object identifies the destination IP address of the BFD session for PW. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.48 | ColumnhwBfdSessSelectBoard | read-only | current | This object indicates the main processing board of a BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.49 | ColumnhwBfdSessPWSPE | read-only | current | The value of this object identifies the node on which a BFD session is set up. The values are as follows. Options: 1. upe(1) -indicates that a BFD session is s… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.50 | ColumnhwBfdSessPWTrackIfName | read-only | current | This object indicates the interface monitored by the BFD session for PW. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.51 | ColumnhwBfdSessIsPWTrackIf | read-only | current | The value of this object identifies whether the BFD session for PW monitors an interface. The values are as follows. Options: 1. enabled(1) -enables the BFD se… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.52 | ColumnhwBfdSessEncapsulationType | read-only | current | The value of this object identifies the VC encapsulation type on an SPE. The values are as follows: fr atm-aal5-sdu atm-trans-cell vlan ethernet hdlc ppp atm-n… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.53 | ColumnhwBfdSessPEVid | read-only | current | The value of this object identifies the outer tag of a sub-interface for QinQ VLAN tag termination or the VLAN ID of a sub-interface for dot1q VLAN tag termina… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.54 | ColumnhwBfdSessCEVid | read-only | current | The value of this object identifies the inner tag in QinQ packets. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.55 | ColumnhwBfdSessPeerInetAddrType | read-only | current | The value of this object identifies the type of the destination address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.56 | ColumnhwBfdSessPeerInetAddr | read-only | current | The value of this object identifies the destination IP address of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.57 | ColumnhwBfdSessInetNextHopType | read-only | current | The value of this object identifies the type of the next hop of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.58 | ColumnhwBfdSessInetNextHop | read-only | current | The value of this object identifies the next hop of the BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.59 | ColumnhwBfdSessBindAppTypeMask | read-only | current | A value which indicates the set of applications that this BFD session binds. Every bit indicates a application. The corresponding bit and applications are as f… |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.60 | ColumnhwBfdSessDscp | read-only | current | This is the dscp value of bfd packet. 255 is invalid value. |
| 1.3.6.1.4.1.2011.5.25.38.2.3.1.61 | ColumnhwBfdSessPWId | read-only | current | It is the ID of PW. |
| 1.3.6.1.4.1.2011.5.25.38.2.4 | TablehwBfdSessionPerTable | not-accessible | current | This table specifies BFD Session performance counters. The index of this table is hwBfdSessPerIndex. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1 | RowhwBfdSessionPerEntry | not-accessible | current | This table specifies BFD Session performance counters. The index of this entry is hwBfdSessPerIndex. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.1 | ColumnhwBfdSessPerIndex | not-accessible | current | The index of BFD session statistics. This index is automatically allocated inside the system and is not user-configurable. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.2 | ColumnhwBfdSessPerfPktIn | read-only | current | The statistical information of the received Octets in local system in this session.The total received packet number. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.3 | ColumnhwBfdSessPerfPktInHC | read-only | current | The statistical information of the received Octets in local system in this session.The high 4 bytes of total received packet number. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.4 | ColumnhwBfdSessPerfPktOut | read-only | current | The statistical information of the send Packets in local system in this session. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.5 | ColumnhwBfdSessPerfPktOutHC | read-only | current | The statistical information of the send Packets in local system in this session.The high 4 bytes of total send packet number. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.6 | ColumnhwBfdSessPerfBadIn | read-only | current | The statistical information of the received Errors in local system in this session. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.7 | ColumnhwBfdSessPerfBadInHC | read-only | current | The statistical information of the received Errors in local system in this session.The high 4 bytes of total received wrong packet number. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.8 | ColumnhwBfdSessPerfBadOut | read-only | current | The statistical information of the send Errors in local system in this session. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.9 | ColumnhwBfdSessPerfBadOutHC | read-only | current | The statistical information of the send Errors in local system in this session.The high 4 bytes of total send wrong packet number. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.10 | ColumnhwBfdSessPerfLastSessDownTime | read-only | current | The time of session last time down. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.11 | ColumnhwBfdSessPerfSessDownCount | read-only | current | The total count of session down. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.12 | ColumnhwBfdSessPerfSessShortBreakCount | read-only | current | The total count of session shortbreak. |
| 1.3.6.1.4.1.2011.5.25.38.2.4.1.13 | ColumnhwBfdSessionPerStartTime | read-only | current | The time that session start detection. |
| 1.3.6.1.4.1.2011.5.25.38.2.5 | TablehwBfdSlotTable | not-accessible | current | The Slot table of BFD. BFD statistics on specify board of containing the following objects. The index of this table is hwBfdSlotID. |
| 1.3.6.1.4.1.2011.5.25.38.2.5.1 | RowhwBfdSlotEntry | not-accessible | current | The Slot table of BFD. BFD statistics on specify board of containing the following objects. The index of this entry is hwBfdSlotID. |
| 1.3.6.1.4.1.2011.5.25.38.2.5.1.1 | ColumnhwBfdSlotID | not-accessible | current | The ID of slot. |
| 1.3.6.1.4.1.2011.5.25.38.2.5.1.2 | ColumnhwBfdSlotReserveOneHopSessNum | read-create | current | The number of session reserving for one-hop session on the board. |
| 1.3.6.1.4.1.2011.5.25.38.2.5.1.3 | ColumnhwBfdSlotOneHopSessNum | read-only | obsolete | The number of session for one-hop session on the board. |
| 1.3.6.1.4.1.2011.5.25.38.2.5.1.4 | ColumnhwBfdSlotCurrentSessNum | read-only | current | The number of session on the board on current. |
| 1.3.6.1.4.1.2011.5.25.38.2.5.1.5 | ColumnhwBfdSlotRowStatus | read-create | current | Used to manage the creation and deletion of conceptual rows. |
| 1.3.6.1.4.1.2011.5.25.38.2.6 | TablehwBfdTtlConfTable | not-accessible | current | The TTL configuration table. The index of this table is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType. |
| 1.3.6.1.4.1.2011.5.25.38.2.6.1 | RowhwBfdTtlConfEntry | not-accessible | current | The TTL configuration table. The index of this entry is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType. |
| 1.3.6.1.4.1.2011.5.25.38.2.6.1.1 | ColumnhwBfdTtlConfAddr | not-accessible | current | IP address. |
| 1.3.6.1.4.1.2011.5.25.38.2.6.1.2 | ColumnhwBfdTtlConfMaskLen | not-accessible | current | Length of IP address mask. |
| 1.3.6.1.4.1.2011.5.25.38.2.6.1.3 | ColumnhwBfdTtlConfType | not-accessible | current | Type of BFD session. Options: 1. singleHop(1) -single hop bfd session 2. multiHop(2) -multi hop bfd session |
| 1.3.6.1.4.1.2011.5.25.38.2.6.1.4 | ColumnhwBfdTtlConfValue | read-create | current | TTL value. |
| 1.3.6.1.4.1.2011.5.25.38.2.6.1.50 | ColumnhwBfdTtlConfRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.2011.5.25.38.2.7 | TablehwBfdPassiveAuthTable | not-accessible | current | The authentication configuration table for entire dynamic bfd session on egress. The index of this table is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtoc… |
| 1.3.6.1.4.1.2011.5.25.38.2.7.1 | RowhwBfdPassiveAuthEntry | not-accessible | current | The authentication configuration table for entire dynamic bfd session on egress. The index of this entry is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtoc… |
| 1.3.6.1.4.1.2011.5.25.38.2.7.1.1 | ColumnhwBfdPassiveAuthPeerAddr | read-create | current | Specify the Lsr-id IP address of the ingress. |
| 1.3.6.1.4.1.2011.5.25.38.2.7.1.2 | ColumnhwBfdPassiveAuthProtocol | read-create | current | Specify the protocol on ingress. Options: 1. te(1) -MPLS TE protocol 2. ldp(2) -MPLS LDP protocol |
| 1.3.6.1.4.1.2011.5.25.38.2.7.1.3 | ColumnhwBfdPassiveAuthKeychainName | read-create | current | Specify the name of the keychain for authentication of entire dynamic bfd session. |
| 1.3.6.1.4.1.2011.5.25.38.2.7.1.4 | ColumnhwBfdPassiveAuthMeticulous | read-only | current | Whether enable meticulous authentication for MD5 or SHA-1 type. Options: 1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type 2. disabled(2) -… |
| 1.3.6.1.4.1.2011.5.25.38.2.7.1.5 | ColumnhwBfdPassiveAuthLoose | read-only | current | Whether loose authentication check. Options: 1. True(1) -loose-check 2. False(2) -do not loose-check Default: false |
| 1.3.6.1.4.1.2011.5.25.38.2.7.1.50 | ColumnhwBfdPassiveAuthRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.2011.5.25.38.3 | NodehwBfdNotifications | |||
| 1.3.6.1.4.1.2011.5.25.38.3.1 | NotificationhwBfdSessDown | current | This trap occurred when the state of the BFD session became down. The BFD session is characterized by the objects in this node. | |
| 1.3.6.1.4.1.2011.5.25.38.3.2 | NotificationhwBfdSessUp | current | This trap occurred when the state of the BFD session became up. The BFD session is characterized by the objects in this node. | |
| 1.3.6.1.4.1.2011.5.25.38.3.3 | NotificationhwBfdSessReachLimit | current | There is the notify when the session number reach the global limit. | |
| 1.3.6.1.4.1.2011.5.25.38.3.4 | NotificationhwBfdSessReachLimitBindIf | current | There is the notify when the session number reach the interface limit. | |
| 1.3.6.1.4.1.2011.5.25.38.3.5 | NotificationhwBfdSessReachLimitResume | current | There is the notify when the session number reach the global limit was cleared. | |
| 1.3.6.1.4.1.2011.5.25.38.3.6 | NotificationhwBfdSessReachLimitBindIfResume | current | There is the notify when the session number reach the interface limit was cleared. | |
| 1.3.6.1.4.1.2011.5.25.38.3.7 | NotificationhwBfdSessCfgRemoteFail | current | This notification is generated when the virtual access AP process BFD configuration failed. | |
| 1.3.6.1.4.1.2011.5.25.38.3.8 | NotificationhwBfdSessFaultDown | current | This trap occurred when the state of the BFD session became down. The BFD session is characterized by the objects in this node. | |
| 1.3.6.1.4.1.2011.5.25.38.3.9 | NotificationhwBfdSessResume | current | This trap occurred when the state of the BFD session resume from down state. The BFD session is characterized by the objects in this node. | |
| 1.3.6.1.4.1.2011.5.25.38.3.10 | NotificationhwBfdSessApOperFailed | current | The operation failed to config access point. | |
| 1.3.6.1.4.1.2011.5.25.38.4 | NodehwBfdConformance | |||
| 1.3.6.1.4.1.2011.5.25.38.4.1 | NodehwBfdCompliances | |||
| 1.3.6.1.4.1.2011.5.25.38.4.1.1 | CompliancehwBfdFullCompliance | current | The compliance statement for entities which implement the Huawei BFD MIB. | |
| 1.3.6.1.4.1.2011.5.25.38.4.2 | NodehwBfdGroups | |||
| 1.3.6.1.4.1.2011.5.25.38.4.2.1 | GrouphwBfdGroup | current | A collection of objects providing BFD global information. | |
| 1.3.6.1.4.1.2011.5.25.38.4.2.2 | GrouphwBfdSessGroup | current | A collection of objects providing BFD session information. | |
| 1.3.6.1.4.1.2011.5.25.38.4.2.3 | GrouphwBfdObsoleteGroup | obsolete | A collection of objects which are obsolete. | |
| 1.3.6.1.4.1.2011.5.25.38.4.2.4 | GrouphwBfdNotificationGroup | current | A collection of traps. | |
| 1.3.6.1.4.1.2011.5.25.38.5 | NodehwBfdTrapsVbOids | |||
| 1.3.6.1.4.1.2011.5.25.38.5.1 | ScalarhwBfdSessVlanID | accessible-for-notify | current | The VLANID binding to BFD session. |
| 1.3.6.1.4.1.2011.5.25.38.5.2 | ScalarhwBfdCfgApUserName | accessible-for-notify | current | The name of user failed to configure access point. |
| 1.3.6.1.4.1.2011.5.25.38.5.3 | ScalarhwBfdCfgApIPAddress | accessible-for-notify | current | The IP-address of user failed to configure access point. |
| 1.3.6.1.4.1.2011.5.25.38.5.4 | ScalarhwBfdCfgApID | accessible-for-notify | current | The ID of access point failed to be configured. |
| 1.3.6.1.4.1.2011.5.25.38.5.5 | ScalarhwBfdCfgApOperation | accessible-for-notify | current | The operation of confiuration to access point. |
| 1.3.6.1.4.1.2011.5.25.38.5.6 | ScalarhwBfdCfgApReason | accessible-for-notify | current | The reason of failed to configure access point. |
| 1.3.6.1.4.1.2011.5.25.38.6 | NodehwBfdTraps | |||
| 1.3.6.1.4.1.2011.5.25.38.6.1 | NodehwBfdCommonTraps | |||
| 1.3.6.1.4.1.2011.5.25.38.6.2 | NodehwBfdAlarmTraps | |||
| 1.3.6.1.4.1.2011.5.25.38.6.2.0 | NodehwBfdAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.25.38.6.2.0.1 | NotificationhwBfdSessUpTrap | current | This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state. | |
| 1.3.6.1.4.1.2011.5.25.38.6.2.0.2 | NotificationhwBfdSessDownTrap | current | This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some oth… | |
| 1.3.6.1.4.1.2011.5.25.38.6.2.0.3 | NotificationhwBfdv6SingleHopSessUpTrap | current | This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state. | |
| 1.3.6.1.4.1.2011.5.25.38.6.2.0.4 | NotificationhwBfdv6SingleHopSessDownTrap | current | This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some oth… | |
| 1.3.6.1.4.1.2011.5.25.38.6.2.0.5 | NotificationhwBfdv6MultiHopSessUpTrap | current | This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state. | |
| 1.3.6.1.4.1.2011.5.25.38.6.2.0.6 | NotificationhwBfdv6MultiHopSessDownTrap | current | This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some oth… | |
| 1.3.6.1.4.1.2011.5.25.38.6.2.0.7 | NotificationhwBfdPWSessUp | current | This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the up(3) state from some other state. | |
| 1.3.6.1.4.1.2011.5.25.38.6.2.0.8 | NotificationhwBfdPWSessDown | current | This notification is generated when the bfdSessState object for one entry in bfdSessionTable is about to enter the down(1) or adminDown(0) states from some oth… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BfdDiag | Integer32 | current | Diagnostic code specifying the local system's reason for the last session state changed. |
| BfdInterval | Integer32 | current | Bfd Time Interval Type. |