MIB Viewer

HUAWEI-CLOCK-MIB

281 objects
Add hwClockGnssModelChange, hwClockPortName, hwClockGnssModel, hwClockOldGnssModel .
Imported Objects
ENTITY-MIBPhysicalIndex
HUAWEI-MIBhwDatacomm
IF-MIBInterfaceIndex
P-BRIDGE-MIBEnabledStatus
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCRowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.2011.5.25.186IdentityhwClockMIBAdd hwClockGnssModelChange, hwClockPortName, hwClockGnssModel, hwClockOldGnssModel .
1.3.6.1.4.1.2011.5.25.186.1NodehwClockManageObjects
1.3.6.1.4.1.2011.5.25.186.1.1NodehwClockGlobalObjects
1.3.6.1.4.1.2011.5.25.186.1.1.1ScalarhwClockSourceEthClkEnableread-writecurrentThe flag indicates that the ethernet clock is globally enabled.
1.3.6.1.4.1.2011.5.25.186.1.1.2ScalarhwClockSourceSsmUnknownread-writecurrentThe quality level of unknown SSM.
1.3.6.1.4.1.2011.5.25.186.1.1.3ScalarhwClockSourceSysClkWorkModeread-onlycurrentThe work mode of system clock.
1.3.6.1.4.1.2011.5.25.186.1.1.4ScalarhwClockSourceForceCloseEnableStatusread-writecurrentThe enable status of export forced close.
1.3.6.1.4.1.2011.5.25.186.1.1.5ScalarhwClockSourceSsmControlread-writecurrentThe flag whether SSM is concerned with the clock source selection.
1.3.6.1.4.1.2011.5.25.186.1.1.6ScalarhwClockSourceHoldModeread-onlycurrentThe hold mode of clock source.
1.3.6.1.4.1.2011.5.25.186.1.1.7ScalarhwClockSourceFreqCheckEnableread-writecurrentThe enable flag of frequency check.
1.3.6.1.4.1.2011.5.25.186.1.1.8ScalarhwClockSourceFreqCheckLeftRangeread-writecurrentThe left range of frequency check, unit in 0.01ppm.
1.3.6.1.4.1.2011.5.25.186.1.1.9ScalarhwClockSourceFreqCheckRightRangeread-writecurrentThe right range of frequency check, unit in 0.01ppm.
1.3.6.1.4.1.2011.5.25.186.1.1.10ScalarhwClockSourceRetrieveModeread-writecurrentThe retrieve mode of clock source.
1.3.6.1.4.1.2011.5.25.186.1.1.11ScalarhwClockTimeUsedSourceread-writecurrentThe clock time used source.
1.3.6.1.4.1.2011.5.25.186.1.1.12ScalarhwClockExtTimeInputTyperead-writecurrentThe input time type of clock extern time.
1.3.6.1.4.1.2011.5.25.186.1.1.13ScalarhwClockExtTimeOutputTyperead-writecurrentThe output time type of clock extern time.
1.3.6.1.4.1.2011.5.25.186.1.1.14ScalarhwClockAlarmThresholdFrequencyOffsetread-writecurrentThe Threshold of clock alarm.
1.3.6.1.4.1.2011.5.25.186.1.1.15ScalarhwClockFrequencyOffsetMaxread-onlycurrentThe max offset of clock frequency.
1.3.6.1.4.1.2011.5.25.186.1.1.16ScalarhwClockFrequencyOffsetMinread-onlycurrentThe min offset of clock frequency.
1.3.6.1.4.1.2011.5.25.186.1.1.17ScalarhwClockFrequencyOffsetMeanread-onlycurrentThe mean offset of clock frequency.
1.3.6.1.4.1.2011.5.25.186.1.1.18ScalarhwClockFrequencyOffsetread-onlycurrentThe current offset of clock frequency.
1.3.6.1.4.1.2011.5.25.186.1.1.19ScalarhwClockBoardFreqSwitchEnableread-writecurrentThe enable flag of board frequency deviation swtich.
1.3.6.1.4.1.2011.5.25.186.1.2TablehwClockSourceSelTablenot-accessiblecurrentThe system clock source selection table.
1.3.6.1.4.1.2011.5.25.186.1.2.1RowhwClockSourceSelEntrynot-accessiblecurrentThe entry of system clock source selection table.
1.3.6.1.4.1.2011.5.25.186.1.2.1.1ColumnhwClockSourceSelChassisIndexnot-accessiblecurrentThe chassis index.
1.3.6.1.4.1.2011.5.25.186.1.2.1.2ColumnhwClockSourceSelTypenot-accessiblecurrentThe select type.
1.3.6.1.4.1.2011.5.25.186.1.2.1.3ColumnhwClockSourceSelModeread-createcurrentThe mode of clock source selection.
1.3.6.1.4.1.2011.5.25.186.1.2.1.4ColumnhwClockSourceSelSourceIdread-createcurrentThe source ID of the clock traced.
1.3.6.1.4.1.2011.5.25.186.1.3TablehwClockSourceCfgTablenot-accessiblecurrentThe clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.3.1RowhwClockSourceCfgEntrynot-accessiblecurrentThe entry of clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.3.1.1ColumnhwClockCfgChassisIndexnot-accessiblecurrentThe index of the chassis whitch the clock source belongs to.
1.3.6.1.4.1.2011.5.25.186.1.3.1.2ColumnhwClockCfgSourceIndexnot-accessiblecurrentThe clock source index.
1.3.6.1.4.1.2011.5.25.186.1.3.1.3ColumnhwClockCfgSourceIdread-onlycurrentThe clock source ID.
1.3.6.1.4.1.2011.5.25.186.1.3.1.4ColumnhwClockCfgSourceDescrread-onlycurrentThe clock source description.
1.3.6.1.4.1.2011.5.25.186.1.3.1.5ColumnhwClockCfgWtrTimeread-writecurrentThe waiting for restore time of clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.6ColumnhwClockCfgBadDetectread-writecurrentThe enable status of clock source bad detecting.
1.3.6.1.4.1.2011.5.25.186.1.3.1.7ColumnhwClockCfgSystemPriorityread-writecurrentThe priority of system clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.8ColumnhwClockCfgBits0Priorityread-writecurrentThe priority of BITS0 clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.9ColumnhwClockCfgBits1Priorityread-writecurrentThe priority of BITS1 clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.10ColumnhwClockCfgSystemLockOutread-writecurrentThe lock out of system clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.11ColumnhwClockCfgBits0LockOutread-writecurrentThe lock out of BITS0 clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.12ColumnhwClockCfgBits1LockOutread-writecurrentThe lock out of BITS1 clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.13ColumnhwClockCfgSourceSsmread-writecurrentThe SSM quality of clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.14ColumnhwClockCfgSourceSsmSetModeread-writecurrentThe set mode of SSM.
1.3.6.1.4.1.2011.5.25.186.1.3.1.15ColumnhwClockCfgExportEnableStatusread-writecurrentThe enable status of clock source export.
1.3.6.1.4.1.2011.5.25.186.1.3.1.16ColumnhwClockCfgSwiEnableStatusread-writecurrenthe enable status of clock source switch.
1.3.6.1.4.1.2011.5.25.186.1.3.1.17ColumnhwClockCfgSourceStateread-writecurrentThe state of clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.18ColumnhwClockCfgSsmThresholdread-writecurrentThe SSM quality level threshold of clock source.
1.3.6.1.4.1.2011.5.25.186.1.3.1.19ColumnhwClockCfgSourceS1Idread-onlycurrentThe S1 byte of the clock.
1.3.6.1.4.1.2011.5.25.186.1.3.1.20ColumnhwClockCfgFreqCheckResultread-writecurrentThe result of frequency check, unit in 0.01ppm.
1.3.6.1.4.1.2011.5.25.186.1.3.1.21ColumnhwClockCfgHoldOffTimeread-writecurrentThe hold off time of clock, unit in 100ms.
1.3.6.1.4.1.2011.5.25.186.1.3.1.22ColumnhwClockCfgPriRvtEnableStatusread-writecurrentThe enable status of switch according priority.
1.3.6.1.4.1.2011.5.25.186.1.3.1.23ColumnhwClockCfgSwitchConditionread-writecurrentThe condition of clock switch.
1.3.6.1.4.1.2011.5.25.186.1.3.1.24ColumnhwClockCfgClkSourceTyperead-onlycurrentThe type of clock source.
1.3.6.1.4.1.2011.5.25.186.1.4TablehwClockBitsCfgTablenot-accessiblecurrentThe clock bits congfig table.
1.3.6.1.4.1.2011.5.25.186.1.4.1RowhwClockBitsCfgEntrynot-accessiblecurrentThe entry of clock bits congfig table.
1.3.6.1.4.1.2011.5.25.186.1.4.1.1ColumnhwClockBitsCfgChassisIndexnot-accessiblecurrentThe index of the chassis whitch the clock source belongs to.
1.3.6.1.4.1.2011.5.25.186.1.4.1.2ColumnhwClockBitsCfgBitsIndexnot-accessiblecurrentThe index of BITS clock.
1.3.6.1.4.1.2011.5.25.186.1.4.1.3ColumnhwClockBitsCfgNameread-onlycurrentThe name of clock.
1.3.6.1.4.1.2011.5.25.186.1.4.1.4ColumnhwClockBitsCfgBitsPortTyperead-onlycurrentThe BITS port type.
1.3.6.1.4.1.2011.5.25.186.1.4.1.5ColumnhwClockBitsCfgBitsTyperead-writecurrentThe BITS type.
1.3.6.1.4.1.2011.5.25.186.1.4.1.6ColumnhwClockBitsCfgDirectionread-writecurrentThe direction of BITS.
1.3.6.1.4.1.2011.5.25.186.1.4.1.7ColumnhwClockBitsCfgRecvSaBitread-writecurrentThe received SA bit.
1.3.6.1.4.1.2011.5.25.186.1.4.1.8ColumnhwClockBitsCfgSendSaBitread-writecurrentThe sent SA bit.
1.3.6.1.4.1.2011.5.25.186.1.4.1.9ColumnhwClockBitsCfgForceOutS1read-writecurrentThe S1 byte of forcing out.
1.3.6.1.4.1.2011.5.25.186.1.4.1.10ColumnhwClockBitsCfgSaBitread-writecurrentThe SA bit of SSM information.
1.3.6.1.4.1.2011.5.25.186.1.4.1.11ColumnhwClockBitsCfgInputModeread-writecurrentThe input mode of clock source.
1.3.6.1.4.1.2011.5.25.186.1.4.1.12ColumnhwClockBitsCfgOutputModeread-writecurrentThe output mode of clock source.
1.3.6.1.4.1.2011.5.25.186.1.4.1.13ColumnhwClockBitsCfgInvalidCondread-writecurrentThe invalid condition of clock source.
1.3.6.1.4.1.2011.5.25.186.1.4.1.14ColumnhwClockBitsCfgSourceIdread-onlycurrentThe clock source ID.
1.3.6.1.4.1.2011.5.25.186.1.4.1.15ColumnhwClockBitsCfgTodSignalread-writecurrentThe tod signal of clock source.
1.3.6.1.4.1.2011.5.25.186.1.4.1.16ColumnhwClockBitsCfgFrameFormatread-writecurrentEncoding type and frame check format of the extern clock port.
1.3.6.1.4.1.2011.5.25.186.1.5TablehwClockPortCfgTablenot-accessiblecurrentThe clock port config table.
1.3.6.1.4.1.2011.5.25.186.1.5.1RowhwClockPortCfgEntrynot-accessiblecurrentThe entry of clock port config table.
1.3.6.1.4.1.2011.5.25.186.1.5.1.1ColumnhwClockPortCfgIfIndexnot-accessiblecurrentThe interface index.
1.3.6.1.4.1.2011.5.25.186.1.5.1.2ColumnhwClockPortCfgLeftFramePriread-writecurrentThe clock priority of left frame.
1.3.6.1.4.1.2011.5.25.186.1.5.1.3ColumnhwClockPortCfgRightFramePriread-writecurrentThe clock priority of right frame.
1.3.6.1.4.1.2011.5.25.186.1.5.1.4ColumnhwClockPortCfgForceOutS1read-writecurrentThe S1 byte of forcing out.
1.3.6.1.4.1.2011.5.25.186.1.6TablehwClockLineClkCfgTablenot-accessiblecurrentThe line clock config table.
1.3.6.1.4.1.2011.5.25.186.1.6.1RowhwClockLineClkCfgEntrynot-accessiblecurrentThe entry of line clock config table.
1.3.6.1.4.1.2011.5.25.186.1.6.1.1ColumnhwClockLineClkCfgChassisIndexnot-accessiblecurrentThe chassis index.
1.3.6.1.4.1.2011.5.25.186.1.6.1.2ColumnhwClockLineClkCfgSlotIndexnot-accessiblecurrentThe slot index of the line clock.
1.3.6.1.4.1.2011.5.25.186.1.6.1.3ColumnhwClockLineClkCfgCardIdread-createcurrentThe card index witch is seleced to provide line clock.
1.3.6.1.4.1.2011.5.25.186.1.6.1.4ColumnhwClockLineClkCfgPortIdread-createcurrentThe port index witch is seleced to provide line clock.
1.3.6.1.4.1.2011.5.25.186.1.6.1.5ColumnhwClockLineClkCfgRecvS1read-onlycurrentThe S1 byte value received.
1.3.6.1.4.1.2011.5.25.186.1.6.1.6ColumnhwClockLineClkCfgSendS1read-createcurrentThe S1 byte value sent.
1.3.6.1.4.1.2011.5.25.186.1.6.1.7ColumnhwClockLineCfgSoureIdread-createcurrentDescription.
1.3.6.1.4.1.2011.5.25.186.1.7NodehwClockTrapOid
1.3.6.1.4.1.2011.5.25.186.1.7.1ScalarhwClockLastSourceNameaccessible-for-notifycurrentThe last clock source name.
1.3.6.1.4.1.2011.5.25.186.1.7.2ScalarhwClockCurSourceNameaccessible-for-notifycurrentThe current clock source name.
1.3.6.1.4.1.2011.5.25.186.1.7.3ScalarhwClockSourceOldLockModeaccessible-for-notifycurrentThe old lock mode of clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.4ScalarhwClockChassisIdaccessible-for-notifycurrentThe chassis ID.
1.3.6.1.4.1.2011.5.25.186.1.7.5ScalarhwClockOldSourceStateaccessible-for-notifycurrentThe old state of clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.6ScalarhwClockPllIdaccessible-for-notifycurrentThe id of pll.
1.3.6.1.4.1.2011.5.25.186.1.7.7ScalarhwClockAttributeOutValueaccessible-for-notifycurrentThe current output value.
1.3.6.1.4.1.2011.5.25.186.1.7.8ScalarhwClockCesAcrSlotaccessible-for-notifycurrentThe slot ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.9ScalarhwClockCesAcrCardaccessible-for-notifycurrentThe card ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.10ScalarhwClockCesAcrDomainaccessible-for-notifycurrentThe recovery domain value of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.11ScalarhwClockCesAcrOldMasterPwNameaccessible-for-notifycurrentThe master pw SerialPort name of CES ACR old clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.12ScalarhwClockCesAcrNewMasterPwNameaccessible-for-notifycurrentThe master pw SerialPort name of CES ACR new clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.13ScalarhwClockCesAcrLockStateaccessible-for-notifycurrentThe lock state of the CES ACR.
1.3.6.1.4.1.2011.5.25.186.1.7.14ScalarhwClockCesDcrSlotaccessible-for-notifycurrentThe slot ID of CES DCR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.15ScalarhwClockCesDcrCardaccessible-for-notifycurrentThe card ID of CES DCR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.16ScalarhwClockCesDcrDomainaccessible-for-notifycurrentThe recovery domain value of CES DCR clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.17ScalarhwClockCesDcrOldMasterPwNameaccessible-for-notifycurrentThe master pw SerialPort name of CES DCR old clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.18ScalarhwClockCesDcrNewMasterPwNameaccessible-for-notifycurrentThe master pw SerialPort name of CES DCR new clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.19ScalarhwClockCesDcrLockStateaccessible-for-notifycurrentThe lock state of the CES DCR.
1.3.6.1.4.1.2011.5.25.186.1.7.20ScalarhwClockOldSourceSsmaccessible-for-notifycurrentThe old SSM quality of clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.21ScalarhwClockNewSourceSsmaccessible-for-notifycurrentThe new SSM quality of clock source.
1.3.6.1.4.1.2011.5.25.186.1.7.22ScalarhwClockClusterNewSyncTypeaccessible-for-notifycurrentThe type of clock inter-chassis sync.
1.3.6.1.4.1.2011.5.25.186.1.7.23ScalarhwClockClusterNewTopoTypeaccessible-for-notifycurrentThe type of clock inter-chassis topo.
1.3.6.1.4.1.2011.5.25.186.1.7.24ScalarhwClockClusterNewTopoLinkTypeaccessible-for-notifycurrentThe type of clock inter-chassis link.
1.3.6.1.4.1.2011.5.25.186.1.7.25ScalarhwClockClusterNewTopoStatusaccessible-for-notifycurrentThe status of clock inter-chassis topo.
1.3.6.1.4.1.2011.5.25.186.1.7.26ScalarhwClockPortIfIndexaccessible-for-notifycurrentPort index.
1.3.6.1.4.1.2011.5.25.186.1.7.27ScalarhwClockPortNameaccessible-for-notifycurrentThe port name.
1.3.6.1.4.1.2011.5.25.186.1.7.28ScalarhwClockGnssModelaccessible-for-notifycurrentThe gnss model.
1.3.6.1.4.1.2011.5.25.186.1.7.29ScalarhwClockOldGnssModelaccessible-for-notifycurrentThe old gnss model.
1.3.6.1.4.1.2011.5.25.186.1.8NodehwClockNotifications
1.3.6.1.4.1.2011.5.25.186.1.8.1NotificationhwClockSourceSwitchcurrentClock source switch notification.
1.3.6.1.4.1.2011.5.25.186.1.8.2NotificationhwClockSourceSysClkLockModeChangecurrentThe lock mode of system clock source change notification.
1.3.6.1.4.1.2011.5.25.186.1.8.3NotificationhwClockSourceStateChangecurrentThe state of clock source change notification.
1.3.6.1.4.1.2011.5.25.186.1.8.4NotificationhwClockSourceStateResumecurrentThe state of clock source resume notification.
1.3.6.1.4.1.2011.5.25.186.1.8.5NotificationhwClockSourceFreqCheckcurrentThe result of clock source frequnce check abnormal notification.
1.3.6.1.4.1.2011.5.25.186.1.8.6NotificationhwClockSourceOutputBelowThresholdcurrentThe SSM of output below threshold notification.
1.3.6.1.4.1.2011.5.25.186.1.8.7NotificationhwClockNotInLockedModecurrentThe work mode of system clock is not in locked mode.
1.3.6.1.4.1.2011.5.25.186.1.8.8NotificationhwClockInLockedModecurrentThe work mode of system clock is in locked mode.
1.3.6.1.4.1.2011.5.25.186.1.8.11NotificationhwClockSourceFailedcurrentThe state of clock source is failed.
1.3.6.1.4.1.2011.5.25.186.1.8.12NotificationhwClockSourceValidcurrentThe state of clock source is valid.
1.3.6.1.4.1.2011.5.25.186.1.8.13NotificationhwClockSourceFreqCheckResumecurrentThe result of clock source frequnce check normal notification.
1.3.6.1.4.1.2011.5.25.186.1.8.14NotificationhwClockSourceOutputBelowThresholdResumecurrentThe SSM of output above threshold notification.
1.3.6.1.4.1.2011.5.25.186.1.8.15NotificationhwClockCesAcrMasterPwChangecurrentCES ACR master PW status change.
1.3.6.1.4.1.2011.5.25.186.1.8.16NotificationhwClockCesAcrLockFailcurrentCES ACR clock source lock fail.
1.3.6.1.4.1.2011.5.25.186.1.8.17NotificationhwClockCesAcrLockFailResumecurrentCES ACR clock source lock fail resume.
1.3.6.1.4.1.2011.5.25.186.1.8.22NotificationhwClockClusterTopoFailcurrentClock cluster inter-chassis synchronization topo compute failed.
1.3.6.1.4.1.2011.5.25.186.1.8.23NotificationhwClockClusterTopoFailResumecurrentClock inter-chassis synchronization topo compute successfully.
1.3.6.1.4.1.2011.5.25.186.1.8.24NotificationhwClockSourceInputBelowThresholdcurrentThe SSM of input below threshold notification.
1.3.6.1.4.1.2011.5.25.186.1.8.25NotificationhwClockSourceInputBelowThresholdResumecurrentThe SSM of input above or equal threshold notification.
1.3.6.1.4.1.2011.5.25.186.1.8.26NotificationhwClockSsmPktLoscurrentThe ssm packet of clock source is lost.
1.3.6.1.4.1.2011.5.25.186.1.8.27NotificationhwClockSsmPktLosResumecurrentThe ssm packet of clock source is normal.
1.3.6.1.4.1.2011.5.25.186.1.8.28NotificationhwClockCesDcrMasterPwChangecurrentCES DCR master PW status change.
1.3.6.1.4.1.2011.5.25.186.1.8.29NotificationhwClockCesDcrLockFailcurrentCES DCR clock source lock fail.
1.3.6.1.4.1.2011.5.25.186.1.8.30NotificationhwClockCesDcrLockFailResumecurrentCES DCR clock source lock fail resume.
1.3.6.1.4.1.2011.5.25.186.1.8.31NotificationhwClockSourceSsmChangecurrentThe SSM quality of clock source change notification.
1.3.6.1.4.1.2011.5.25.186.1.8.32NotificationhwClockFMSwitchcurrentClock select mode is force or manual.
1.3.6.1.4.1.2011.5.25.186.1.8.33NotificationhwClockFMSwitchResumecurrentClock select mode is automative.
1.3.6.1.4.1.2011.5.25.186.1.8.34NotificationhwClockSyncBadcurrentClock frequency synchronization bad.
1.3.6.1.4.1.2011.5.25.186.1.8.35NotificationhwClockSyncBadResumecurrentClock frequency synchronization bad resume.
1.3.6.1.4.1.2011.5.25.186.1.8.36NotificationhwClockPortNonSupportcurrentIn current link mode, the hardware, such as boards and optical modules, do not support physical-layer clock synchronization.
1.3.6.1.4.1.2011.5.25.186.1.8.37NotificationhwClockPortNonSupportResumecurrentThe alarm that the hardware do not support physical-layer clock synchronization is resumed.
1.3.6.1.4.1.2011.5.25.186.1.8.38NotificationhwClockGnssModelChangecurrentThe smart clock gnss model changed.
1.3.6.1.4.1.2011.5.25.186.1.9TablehwClockAttributeTablenot-accessiblecurrentThe clock Attribute table.
1.3.6.1.4.1.2011.5.25.186.1.9.1RowhwClockAttributeEntrynot-accessiblecurrentThe entry of clock Attribute table.
1.3.6.1.4.1.2011.5.25.186.1.9.1.1ColumnhwClockAttributeChassisIndexnot-accessiblecurrentThe chassis index.
1.3.6.1.4.1.2011.5.25.186.1.9.1.2ColumnhwClockAttributeSysClkRunModeread-writecurrentThe run mode of system clock.
1.3.6.1.4.1.2011.5.25.186.1.9.1.3ColumnhwClockAttributeSsmControlread-writecurrentThe flag whether SSM is concerned with the clock source selection.
1.3.6.1.4.1.2011.5.25.186.1.9.1.4ColumnhwClockAttributeFreqCheckEnableread-writecurrentThe enable flag of frequency check.
1.3.6.1.4.1.2011.5.25.186.1.9.1.5ColumnhwClockAttributeRetrieveModeread-writecurrentThe retrieve mode of system clock.
1.3.6.1.4.1.2011.5.25.186.1.9.1.6ColumnhwClockAttributeWtrTimeread-writecurrentThe time waiting for retrieve.
1.3.6.1.4.1.2011.5.25.186.1.9.1.7ColumnhwClockAttributeHoldOffTimeread-writecurrentThe holdoff-time when the system source is lost.
1.3.6.1.4.1.2011.5.25.186.1.9.1.8ColumnhwClockAttributeOutThresholdread-writecurrentThe Threshold of out put.
1.3.6.1.4.1.2011.5.25.186.1.9.1.9ColumnhwClockAttributeSysMaxOutSsmread-writecurrentThe max ssm of system out put.
1.3.6.1.4.1.2011.5.25.186.1.9.1.10ColumnhwClockAttribute2M1MaxOutSsmread-writecurrentThe max ssm of 2msync-1 out put.
1.3.6.1.4.1.2011.5.25.186.1.9.1.11ColumnhwClockAttribute2M2MaxOutSsmread-writecurrentThe max ssm of 2msync-2 out put.
1.3.6.1.4.1.2011.5.25.186.1.9.1.12ColumnhwClockAttributeSysClkLockModeread-onlycurrentThe Lock mode of system clock.
1.3.6.1.4.1.2011.5.25.186.1.9.1.13ColumnhwClockAttributeExtendSsmControlread-writecurrentThe flag whether Extend SSM is concerned with the clock source selection.
1.3.6.1.4.1.2011.5.25.186.1.9.1.14ColumnhwClockAttributeInternalClockIdread-writecurrentThe internal clockid of the device.
1.3.6.1.4.1.2011.5.25.186.1.9.1.15ColumnhwClockAttributeTodProtocolread-writecurrent1pps bits tod protocol.
1.3.6.1.4.1.2011.5.25.186.1.9.1.16ColumnhwClockAttributeLtiSquelchread-writecurrentThe frequency signal output squelch flag upon the frequency loss.
1.3.6.1.4.1.2011.5.25.186.1.9.1.17ColumnhwClockAttributeInputThresholdread-writecurrentThe squelch threshold of the external input source.
1.3.6.1.4.1.2011.5.25.186.1.10TablehwClockSrcSelTablenot-accessiblecurrentThe system clock source selection table.
1.3.6.1.4.1.2011.5.25.186.1.10.1RowhwClockSrcSelEntrynot-accessiblecurrentThe entry of system clock source selection table.
1.3.6.1.4.1.2011.5.25.186.1.10.1.1ColumnhwClockSrcSelChassisIndexnot-accessiblecurrentThe chassis index.
1.3.6.1.4.1.2011.5.25.186.1.10.1.2ColumnhwClockSrcSelTypenot-accessiblecurrentThe PLL Id.
1.3.6.1.4.1.2011.5.25.186.1.10.1.3ColumnhwClockSrcSelModeread-writecurrentThe mode of clock source selection.
1.3.6.1.4.1.2011.5.25.186.1.10.1.4ColumnhwClockSrcSelSrcNameread-writecurrentThe name of clock source for selection.
1.3.6.1.4.1.2011.5.25.186.1.10.1.5ColumnhwClockSrcTraceSrcNameread-onlycurrentThe name of trace source.
1.3.6.1.4.1.2011.5.25.186.1.11TablehwClockSrcCfgTablenot-accessiblecurrentThe clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.11.1RowhwClockSrcCfgEntrynot-accessiblecurrentThe entry of clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.11.1.1ColumnhwClockSrcCfgChassisIndexnot-accessiblecurrentThe chassis index.
1.3.6.1.4.1.2011.5.25.186.1.11.1.2ColumnhwClockSrcCfgSourceTypeIndexaccessible-for-notifycurrentThe type of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.3ColumnhwClockSrcCfgSourceIndexnot-accessiblecurrentThe index of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.4ColumnhwClockSrcCfgSourceDescrread-onlycurrentThe description of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.5ColumnhwClockSrcCfgClkEnableread-createcurrentThe enable flag of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.6ColumnhwClockSrcCfgSystemPriorityread-createcurrentThe priority of system clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.7ColumnhwClockSrcCfg2M1Priorityread-createcurrentThe priority of 2msync-1 clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.8ColumnhwClockSrcCfg2M2Priorityread-createcurrentThe priority of 2msync-2 clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.9ColumnhwClockSrcCfgSourceSsmread-createcurrentThe SSM quality of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.10ColumnhwClockSrcCfgSsmSetModeread-onlycurrentThe set mode of SSM.
1.3.6.1.4.1.2011.5.25.186.1.11.1.11ColumnhwClockSrcCfgSourceStateread-onlycurrentThe state of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.12ColumnhwClockSrcCfgFreqCheckResultread-onlycurrentThe result of frequency check.
1.3.6.1.4.1.2011.5.25.186.1.11.1.13ColumnhwClockSrcCfgSsmIntervalread-createcurrentDescription.
1.3.6.1.4.1.2011.5.25.186.1.11.1.14ColumnhwClockSrcCfgSsmTimeoutread-createcurrentDescription.
1.3.6.1.4.1.2011.5.25.186.1.11.1.15ColumnhwClockSrcCfgSabitread-writecurrentThe SA bit of E1 Port SSM information.
1.3.6.1.4.1.2011.5.25.186.1.11.1.16ColumnhwClockSrcCfgClockIdread-writecurrentThe clockid of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.17ColumnhwClockSrcCfgClockIdSetModeread-onlycurrentThe set mode of clockid.
1.3.6.1.4.1.2011.5.25.186.1.11.1.18ColumnhwClockSrcCfgOutSsmread-onlycurrentCurrent output ssm.
1.3.6.1.4.1.2011.5.25.186.1.11.1.19ColumnhwClockSrcCfgOutClockIdread-onlycurrentCurrent output clockid.
1.3.6.1.4.1.2011.5.25.186.1.11.1.20ColumnhwClockSrcCfgRowStatusread-createcurrentThe row status.
1.3.6.1.4.1.2011.5.25.186.1.11.1.21ColumnhwClockSrcCfgFreqDeviationread-onlycurrentFreqdeviation value of clock source.
1.3.6.1.4.1.2011.5.25.186.1.11.1.22ColumnhwClockSrcCfgPhyStateread-onlycurrentThe PHY clock state of ports.
1.3.6.1.4.1.2011.5.25.186.1.11.1.23ColumnhwClockSrcCfgNegotiationSlaveread-createcurrentSet PHY clock state to slave.
1.3.6.1.4.1.2011.5.25.186.1.11.1.24ColumnhwClockSrcCfgFreqDeviationRecoverread-createcurrentThe recovery of clock source freq-deviation state.
1.3.6.1.4.1.2011.5.25.186.1.12TablehwClockCesAcrPortCfgTablenot-accessiblecurrentThe CES ACR clock port config table.
1.3.6.1.4.1.2011.5.25.186.1.12.1RowhwClockCesAcrPortCfgEntrynot-accessiblecurrentThe entry of CES ACR clock port config table.
1.3.6.1.4.1.2011.5.25.186.1.12.1.1ColumnhwClockCesAcrParentIfIndexnot-accessiblecurrentIndicates the index of the parent interface.
1.3.6.1.4.1.2011.5.25.186.1.12.1.2ColumnhwClockCesAcrChannelIdnot-accessiblecurrentIndicates the channel ID.
1.3.6.1.4.1.2011.5.25.186.1.12.1.3ColumnhwClockCesAcrIfIndexnot-accessiblecurrentIndicates the interface index.
1.3.6.1.4.1.2011.5.25.186.1.12.1.4ColumnhwClockCesAcrPortNameread-onlycurrentPort name.
1.3.6.1.4.1.2011.5.25.186.1.12.1.5ColumnhwClockCesAcrChannelTyperead-createcurrentIndicates the interface type. The type can be E1/CE1 or T1/CT1.
1.3.6.1.4.1.2011.5.25.186.1.12.1.6ColumnhwClockCesAcrSourceModeread-createcurrentIndicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the …
1.3.6.1.4.1.2011.5.25.186.1.12.1.7ColumnhwClockCesAcrRecoveryDomainread-createcurrentIndicates the clock recovery domain of the interface. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.12.1.8ColumnhwClockCesAcrPwDomainread-createcurrentIndicates the clock PW domain of the interface. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.12.1.9ColumnhwClockCesAcrPortCfgRowStatusread-createcurrentThe row status.
1.3.6.1.4.1.2011.5.25.186.1.12.1.10ColumnhwClockCesAcrMasterDomainread-createcurrentIndicates the clock master domain of the interface. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.12.1.11ColumnhwClockCesModeread-createcurrentIndicates the clock CES recovery mode of the interface. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.13TablehwClockCesAcrCfgTablenot-accessiblecurrentThe CES ACR clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.13.1RowhwClockCesAcrCfgEntrynot-accessiblecurrentThe entry of CES ACR clock source config table.
1.3.6.1.4.1.2011.5.25.186.1.13.1.1ColumnhwClockCesAcrCfgSlotnot-accessiblecurrentThe slot ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.2ColumnhwClockCesAcrCfgCardnot-accessiblecurrentThe card ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.3ColumnhwClockCesAcrCfgDomainnot-accessiblecurrentThe recovery domain value of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.4ColumnhwClockCesAcrCfgDescrread-onlycurrentThe description of clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.5ColumnhwClockCesAcrCfgSyncEnableread-createcurrentThe enable flag of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.6ColumnhwClockCesAcrCfgSystemPriorityread-createcurrentThe priority of system CES ACR clock source. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.13.1.7ColumnhwClockCesAcrCfgSsmread-createcurrentThe SSM quality of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.8ColumnhwClockCesAcrCfgClockIdread-createcurrentThe clockid of clock source. DEFVAL is 0.
1.3.6.1.4.1.2011.5.25.186.1.13.1.9ColumnhwClockCesAcrCfgSourceStateread-onlycurrentThe state of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.13.1.10ColumnhwClockCesAcrCfgFreqCheckResultread-onlycurrentThe result of CES ACR clock source frequency check.
1.3.6.1.4.1.2011.5.25.186.1.13.1.11ColumnhwClockCesAcrCfgRowStatusread-createcurrentThe row status.
1.3.6.1.4.1.2011.5.25.186.1.14TablehwClockCesAcrDomainInfoTablenot-accessiblecurrentThe CES ACR domain infomation table.
1.3.6.1.4.1.2011.5.25.186.1.14.1RowhwClockCesAcrDomainInfoEntrynot-accessiblecurrentThe entry of CES ACR domain infomation table.
1.3.6.1.4.1.2011.5.25.186.1.14.1.1ColumnhwClockCesAcrDomianInfoSlotnot-accessiblecurrentThe slot ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.14.1.2ColumnhwClockCesAcrDomianInfoCardnot-accessiblecurrentThe card ID of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.14.1.3ColumnhwClockCesAcrDomianInfoDomainnot-accessiblecurrentThe recovery domain value of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.14.1.4ColumnhwClockCesAcrDomianInfoMasterPwNameread-onlycurrentPort name.
1.3.6.1.4.1.2011.5.25.186.1.14.1.5ColumnhwClockCesAcrDomianInfoChannelIdread-onlycurrentIndicates the channel ID.
1.3.6.1.4.1.2011.5.25.186.1.14.1.6ColumnhwClockCesAcrDomianInfoStateread-onlycurrentThe state of CES ACR clock source.
1.3.6.1.4.1.2011.5.25.186.1.15TablehwClockClusterTopoTablenot-accessiblecurrentThe CES ACR domain infomation table.
1.3.6.1.4.1.2011.5.25.186.1.15.1RowhwClockClusterTopoEntrynot-accessiblecurrentDescription.
1.3.6.1.4.1.2011.5.25.186.1.15.1.1ColumnhwClockClusterSyncTyperead-onlycurrentThe type of clock inter-chassis sync.
1.3.6.1.4.1.2011.5.25.186.1.15.1.2ColumnhwClockClusterTopoTyperead-onlycurrentThe type of clock inter-chassis topo..
1.3.6.1.4.1.2011.5.25.186.1.15.1.3ColumnhwClockClusterTopoLinkTyperead-onlycurrentThe type of clock inter-chassis link.
1.3.6.1.4.1.2011.5.25.186.1.15.1.4ColumnhwClockClusterTopoStatusread-onlycurrentThe status of clock inter-chassis topo.
1.3.6.1.4.1.2011.5.25.186.1.16TablehwClockSmartClockPortCfgTablenot-accessiblecurrentThis table is used to read and set parameters related to the SmartClock module.
1.3.6.1.4.1.2011.5.25.186.1.16.1RowhwClockSmartClockPortCfgEntrynot-accessiblecurrentThe entry of SmartClock clock port config table.
1.3.6.1.4.1.2011.5.25.186.1.16.1.1ColumnhwClockSmartClockIfIndexnot-accessiblecurrentThis object indicates a port index.
1.3.6.1.4.1.2011.5.25.186.1.16.1.2ColumnhwClockSmartClockPtpPriority1read-createcurrentThis object indicates the time source priority 1 for the SmartClock module.
1.3.6.1.4.1.2011.5.25.186.1.16.1.3ColumnhwClockSmartClockPtpPriority2read-createcurrentThis object indicates the time source priority 2 for the SmartClock module.
1.3.6.1.4.1.2011.5.25.186.1.16.1.4ColumnhwClockSmartClockPtpDomainread-createcurrentThis object indicates the domain to which the SmartClock module's time source belongs.
1.3.6.1.4.1.2011.5.25.186.1.16.1.5ColumnhwClockSmartClockSatelliteNumberread-onlycurrentThis object indicates the number of satellites that the SmartClock module traces. If the module is not installed, the default value is invalid(255).
1.3.6.1.4.1.2011.5.25.186.1.16.1.6ColumnhwClockSmartClockPtpClockClassread-onlycurrentThis object indicates the quality level of the time source traced by the SmartClock module. If the module is not installed, the default value is invalid(256).
1.3.6.1.4.1.2011.5.25.186.1.16.1.7ColumnhwClockSmartClockSyncESsmread-onlycurrentThis object indicates the SSM value of the time source traced by the SmartClock module. If the module is not installed, the default value is invalid(0).
1.3.6.1.4.1.2011.5.25.186.1.16.1.8ColumnhwClockSmartClockFreqLockStatread-onlycurrentThis object indicates the frequency lockout flag of the SmartClock module. If the module is not installed, the default value is invalid(2).
1.3.6.1.4.1.2011.5.25.186.1.16.1.9ColumnhwClockSmartClockTimeLockStatread-onlycurrentThis object indicates the time lockout flag of the SmartClock module. If the module is not installed, the default value is invalid(2).
1.3.6.1.4.1.2011.5.25.186.1.16.1.10ColumnhwClockSmartClockPortCfgRowStatusread-createcurrentThe row status.
1.3.6.1.4.1.2011.5.25.186.1.16.1.11ColumnhwClockSmartPlugInFlagread-onlycurrentThis object indicates whether the SmartClock module is installed. If the module is not installed, the default value is offline(1).
1.3.6.1.4.1.2011.5.25.186.1.16.1.12ColumnhwClockSmartClockLatituderead-onlycurrentThis object indicates the latitude of the SmartClock module. If the module is not installed, the default value is invalid.
1.3.6.1.4.1.2011.5.25.186.1.16.1.13ColumnhwClockSmartClockLongituderead-onlycurrentThis object indicates the longitude of the SmartClock module. If the module is not installed, the default value is invalid.
1.3.6.1.4.1.2011.5.25.186.1.16.1.14ColumnhwClockSmartClockAltituderead-onlycurrentThis object indicates the altitude of the SmartClock module. If the module is not installed, the default value is invalid.
1.3.6.1.4.1.2011.5.25.186.1.16.1.15ColumnhwClockSmartClockWorkModeread-onlycurrentThis object indicates the working mode of the GPS receiver on the SmartClock module. If the module is not installed, the default value is invalid(1).
1.3.6.1.4.1.2011.5.25.186.1.16.1.16ColumnhwClockSmartClockLeapSecondread-onlycurrentThis object indicates the leap second of the SmartClock module. If the module is not installed, the default value is invalid(255).
1.3.6.1.4.1.2011.5.25.186.1.16.1.17ColumnhwClockSmartClockSatelliteCnoread-onlycurrentThis object indicates the signal-to-noise ratio of the tracing satellite for the SmartClock module. If the module is not installed, the default value is invali…
1.3.6.1.4.1.2011.5.25.186.1.16.1.18ColumnhwClockSmartClockGpsTimeread-onlycurrentThis object indicates the GPS time of the SmartClock module. If the module is not installed, the default value is invalid.
1.3.6.1.4.1.2011.5.25.186.1.17TablehwClockCesSerialCfgTablenot-accessiblecurrentThis table is used to configure the CES clock mode for serial interfaces.
1.3.6.1.4.1.2011.5.25.186.1.17.1RowhwClockCesSerialCfgEntrynot-accessiblecurrentThe entry of CES Serial Cfg table.
1.3.6.1.4.1.2011.5.25.186.1.17.1.1ColumnhwClockCesSerialChassisIndexnot-accessiblecurrentThis object indicates the chassis index.
1.3.6.1.4.1.2011.5.25.186.1.17.1.2ColumnhwClockCesSerialIfIndexnot-accessiblecurrentThis object indicates the serial interface index.
1.3.6.1.4.1.2011.5.25.186.1.17.1.3ColumnhwClockCesSerialNameread-onlycurrentThis object indicates the serial interface name.
1.3.6.1.4.1.2011.5.25.186.1.17.1.4ColumnhwClockCesSerialRowStatusread-createcurrentThe row status.
1.3.6.1.4.1.2011.5.25.186.1.17.1.5ColumnhwClockCesSerialModeread-createcurrentThis object is used to set serial interface clock mode.
1.3.6.1.4.1.2011.5.25.186.10NodehwClockConformance
1.3.6.1.4.1.2011.5.25.186.10.1NodehwClockSourceCompliances
1.3.6.1.4.1.2011.5.25.186.10.1.1CompliancehwClockSourceCompliancecurrentThe compliance of clock MIB.
1.3.6.1.4.1.2011.5.25.186.10.2NodehwClockSourceGroups
1.3.6.1.4.1.2011.5.25.186.10.2.8GrouphwClockManageSysGroupcurrentThe manage group.
1.3.6.1.4.1.2011.5.25.186.10.2.9GrouphwClockSysSelGroupcurrentThe system selection group.
1.3.6.1.4.1.2011.5.25.186.10.2.10GrouphwClockSourceCfgGroupcurrentThe clock source group.
1.3.6.1.4.1.2011.5.25.186.10.2.13GrouphwClockPortCfgGroupcurrentThe port config of clock source group.
1.3.6.1.4.1.2011.5.25.186.10.2.14GrouphwClockBitsCfgGroupcurrentThe BITS clock source group.
1.3.6.1.4.1.2011.5.25.186.10.2.15GrouphwClockTrapOidGroupcurrentThe clock trap group.
1.3.6.1.4.1.2011.5.25.186.10.2.16GrouphwClockNotificationsGroupcurrentThis is the group of clock notification.
1.3.6.1.4.1.2011.5.25.186.10.2.17GrouphwClockLineCfgGroupcurrentThe line clock group..