HUAWEI-CONFIG-MAN-MIB
115 objects
The HUAWEI-CONFIG-MAN-MIB contains objects to manage the system configuration. It defines the model used to represent configuration data that exists elsewhere in the system and in peripheral devices. The MIB is proper for system configuration. NMS can query configuration change log information and operate configuration. There are no constraints on this MIB.
Imported Objects
| HUAWEI-MIB | huaweiUtility |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.10 | IdentityhwConfig | The HUAWEI-CONFIG-MAN-MIB contains objects to manage the system configuration. It defines the model used to represent configuration data that exists elsewhere … | ||
| 1.3.6.1.4.1.2011.6.10.1 | NodehwConfigManObjects | |||
| 1.3.6.1.4.1.2011.6.10.1.1 | NodehwCfgLog | |||
| 1.3.6.1.4.1.2011.6.10.1.1.1 | ScalarhwCfgRunModifiedLast | read-only | current | The object records the value of sysUpTime when the current configuration running in the system was last modified. |
| 1.3.6.1.4.1.2011.6.10.1.1.2 | ScalarhwCfgRunSavedLast | read-only | current | The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than hwCfg… |
| 1.3.6.1.4.1.2011.6.10.1.1.3 | ScalarhwCfgStartModifiedLast | read-only | current | The object records the value of sysUpTime when the saved configuration used currently was last modified. It may have been changed by a save of the current conf… |
| 1.3.6.1.4.1.2011.6.10.1.1.4 | ScalarhwCfgLogLimitedEntries | read-only | current | The object shows the maximum number of rows in hwCfgLogTable. The value supported by the system is 10. |
| 1.3.6.1.4.1.2011.6.10.1.1.5 | ScalarhwCfgLogDeletedEntries | read-only | current | The total number of rows deleted from hwCfgLogTable. |
| 1.3.6.1.4.1.2011.6.10.1.1.6 | ScalarhwCfgLogWantBackup | read-write | current | Decides whether or not to backup the configuration log information. If the value is true, the data of configuration log on the master will be sent to slave. Ot… |
| 1.3.6.1.4.1.2011.6.10.1.1.7 | TablehwCfgLogTable | not-accessible | current | A table of configuration log on this device. |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1 | RowhwCfgLogEntry | not-accessible | current | Information about a configuration log in this system. |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.1 | ColumnhwCfgLogIndex | not-accessible | current | The index of hwCfgLogTable, which is a incremental integer. The maximum value of the node is 2147483647.The table should wrap the value to 1 and flush all the … |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.2 | ColumnhwCfgLogTime | read-only | current | Specifies the sysUpTime when the configuration log was generated. |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.3 | ColumnhwCfgLogSrcCmd | read-only | current | Specifies the source command resulting in the log. Currently we provide the types of source: 1.cmdLine(1):configuration log instigated by command line. 2.snmp(… |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.4 | ColumnhwCfgLogSrcData | read-only | current | The configuration data source for the event. erase erasing destination running operational data alive commandSource the command source itself startup what the … |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.5 | ColumnhwCfgLogDesData | read-only | current | The configuration data destination for the event. unknown unknown running operational data alive commandSource the command source itself startup what the syste… |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.6 | ColumnhwCfgLogTerminalType | read-only | current | Specifies the terminal type. If hwCfgLogSrcData is not 'cmdLine', the value of the object is 'notApplicable'. The value list: notApplicable(1): no meaning at t… |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.7 | ColumnhwCfgLogTerminalUser | read-only | current | The name of a logging user which is available when hwCfgLogSrcCmd is 'cmdLine'. When hwCfgLogTerminalType is 'virtual' and user login in authentication, the ob… |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.8 | ColumnhwCfgLogTerminalNum | read-only | current | Specifies the terminal number. If hwCfgLogSrcCmd variable is not 'cmdLine'(such as 'snmp'or 'other'), the value of the object is '-1'. If hwCfgLogSrcCmd variab… |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.9 | ColumnhwCfgLogTerminalLocation | read-only | current | The available location of the terminal when hwCfgLogSrcCmd is 'cmdLine'. Otherwise, it is a zero length string. |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.10 | ColumnhwCfgLogCmdSrcAddress | read-only | current | The address from which a request comes when the value of hwCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hwCfgLogT… |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.11 | ColumnhwCfgLogVirHost | read-only | current | The available host name of the remote system connected if hwCfgLogTerminalType has the value of 'virtual'. Otherwise, the value of the object is a zero length … |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.12 | ColumnhwCfgLogUserName | read-only | current | The user name used when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is a zero length string. |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.13 | ColumnhwCfgLogServerAddress | read-only | current | The remote server address when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is 0.0.0.0. |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.14 | ColumnhwCfgLogFile | read-only | current | The remote file name when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is a zero length string. |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.15 | ColumnhwCfgLogConfigChangeId | read-only | obsolete | This is the sequence ID of configuration. When configuration is changed, ID is added. |
| 1.3.6.1.4.1.2011.6.10.1.1.7.1.16 | ColumnhwCfgLogCfgBaselineTime | read-only | obsolete | Specifies the time of system confiuration was baseline. |
| 1.3.6.1.4.1.2011.6.10.1.2 | NodehwCfgOperate | |||
| 1.3.6.1.4.1.2011.6.10.1.2.1 | ScalarhwCfgOperateGlobalEntryLimit | read-only | current | The maximum number of copy entries that may be held in hwCfgOperateTable. A particular setting does not guarantee that much data can be held. |
| 1.3.6.1.4.1.2011.6.10.1.2.2 | ScalarhwCfgOperateEntryAgeOutTime | read-write | current | This value indicates the primary reference time of the hwCfgOperateEntry saved in the hwCfgOperateTable.This value is not valid if there is extra space in the … |
| 1.3.6.1.4.1.2011.6.10.1.2.3 | ScalarhwCfgOperateResultGlobalEntryLimit | read-write | current | The maximum number of copy entries that may be held in hwCfgOperateResultTable. A particular setting does not guarantee that much data can be held. Default val… |
| 1.3.6.1.4.1.2011.6.10.1.2.4 | TablehwCfgOperateTable | not-accessible | current | A table of config-operation requests. |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1 | RowhwCfgOperateEntry | not-accessible | current | An operate request entry. |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.1 | ColumnhwCfgOperateIndex | not-accessible | current | The unique index value of a row in this table. |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.2 | ColumnhwCfgOperateType | read-create | current | Specifies the type of an operation on configuration. For detailed information, please see the ConfigOperationType definition. |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.3 | ColumnhwCfgOperateProtocol | read-create | current | If the value of hwCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this object specifies the protocol which is used for file transfer . Th… |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.4 | ColumnhwCfgOperateFileName | read-create | current | When the object of hwCfgOperateType has the value of net2Startup, net2Running or running2Net, the value must be specified. The file name may include the path i… |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.5 | ColumnhwCfgOperateServerAddress | read-create | current | When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the FTP/TFTP/SFTP server from/to which to download/upload mus… |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.6 | ColumnhwCfgOperateUserName | read-create | current | When the operation type is running2Net,net2Running,net2Startup or startup2net , the user name for the FTP/SFTP server from/to which to download/upload should b… |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.7 | ColumnhwCfgOperateUserPassword | read-create | current | When the operation type is running2Net,net2Running,net2Startup or startup2net , the user password for the FTP/SFTP server from/to which to download/upload shou… |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.8 | ColumnhwCfgOperateEndNotificationSwitch | read-create | current | Specifies whether or not a notification should be issued on the completion of the operation. |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.9 | ColumnhwCfgOperateRowStatus | read-create | current | The status of this table entry. When the status is active : (1) In the situation that the specified transfer operation by ftp/tftp is in progress, the transfer… |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.10 | ColumnhwCfgOperateServerPort | read-create | current | This object specifies the SFTP/FTP server port that is used for file transfer only if the value of hwCfgOperateProtocol is sftp/ftp. The default SFTP server po… |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.11 | ColumnhwCfgOperateSourceAddress | read-create | current | The source IP address. When the operation type is running2Net, net2Running, net2Startup or startup2net, the source IP address of the client may be specified or… |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.12 | ColumnhwCfgOperateSourceInterface | read-create | current | The name of the interface.When the operation type is running2Net, net2Running,net2Startup or startup2net, the source interface of the FTP/TFTP client may be sp… |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.13 | ColumnhwCfgOperateOnError | read-create | current | This object specifies the action when a configuration command fails to be executed. continueOnError: skips the failed configuration command and continues to ru… |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.17 | ColumnhwCfgOperateServerAddressType | read-create | current | The ip address type of the FTP/TFTP/SFTP server from/to which to download/upload must be specified. 1 is used for ipv4, 2 is used for ipv6. |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.18 | ColumnhwCfgOperateServerAddressNet | read-create | current | Address or host name of the FTP/TFTP/SFTP server from/to which to download/upload must be specified. |
| 1.3.6.1.4.1.2011.6.10.1.2.4.1.19 | ColumnhwCfgOperateVpnInstance | read-create | current | The VPN instance name that through which to transfer the file. |
| 1.3.6.1.4.1.2011.6.10.1.2.5 | TablehwCfgOperateResultTable | not-accessible | current | A table of config-operation requests result. |
| 1.3.6.1.4.1.2011.6.10.1.2.5.1 | RowhwCfgOperateResultEntry | not-accessible | current | The result entries of configuration operation requests. |
| 1.3.6.1.4.1.2011.6.10.1.2.5.1.1 | ColumnhwCfgOperateResultIndex | not-accessible | current | The index of Table, which is an incremental integer. The maximum value of the node is 2147483647.The agent should wrap the value to 1 and flush all the existin… |
| 1.3.6.1.4.1.2011.6.10.1.2.5.1.2 | ColumnhwCfgOperateResultOptIndex | read-only | current | The operation index in the hwCfgOperateTable. |
| 1.3.6.1.4.1.2011.6.10.1.2.5.1.3 | ColumnhwCfgOperateResultOpType | read-only | current | The operation type in the hwCfgOperateTable. |
| 1.3.6.1.4.1.2011.6.10.1.2.5.1.4 | ColumnhwCfgOperateState | read-only | current | The status of the specified operation. opInProgress : specified operation is active opOperationSuccess : specified operation is supported and completed success… |
| 1.3.6.1.4.1.2011.6.10.1.2.5.1.5 | ColumnhwCfgOperateTime | read-only | current | Records the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes. |
| 1.3.6.1.4.1.2011.6.10.1.2.5.1.6 | ColumnhwCfgOperateEndTime | read-only | current | The value of sysUpTime when the configuration operation is finished. |
| 1.3.6.1.4.1.2011.6.10.1.2.5.1.7 | ColumnhwCfgOperateTransferProgress | read-only | current | This object indicates progress of file transfer in the hwCfgOperateTable. When hwCfgOperateProtocol is specified as 2(tftp) or 3(sftp), and hwCfgOperateType is… |
| 1.3.6.1.4.1.2011.6.10.1.2.5.1.8 | ColumnhwCfgOperateErrorReason | read-only | current | The failure reason of configuration operation. |
| 1.3.6.1.4.1.2011.6.10.1.2.6 | TablehwCfgModuleChangeTimeTable | not-accessible | current | Table on changes of configuration. |
| 1.3.6.1.4.1.2011.6.10.1.2.6.1 | RowhwCfgModuleChangeTimeEntry | not-accessible | current | Time entity on changes of the configuration module. |
| 1.3.6.1.4.1.2011.6.10.1.2.6.1.1 | ColumnhwCfgModuleId | not-accessible | current | Module index. It is an integer without enumeration. This is because the enumeration may expose the classification methods of modules. In addition, this field i… |
| 1.3.6.1.4.1.2011.6.10.1.2.6.1.11 | ColumnhwCfgModuleChangeTime | read-only | current | Time on changes of the module. |
| 1.3.6.1.4.1.2011.6.10.1.2.7 | ScalarhwCfgOperateCompareConfig | read-write | current | compare configuration of the files |
| 1.3.6.1.4.1.2011.6.10.1.2.8 | ScalarhwCfgRestoreErrCode | accessible-for-notify | current | ErrorCode: cause of an alarm.(1:Failed to restore some configurations. 2:Failed to restore all configurations because of a failure to open the configuration fi… |
| 1.3.6.1.4.1.2011.6.10.1.3 | NodehwCfgSave | |||
| 1.3.6.1.4.1.2011.6.10.1.3.1 | ScalarhwCfgSaveAutoInterval | read-write | current | The object records the interval minute of saving configuration automatically. the function of saving configuration automatically is disable when the interval i… |
| 1.3.6.1.4.1.2011.6.10.1.3.2 | ScalarhwCfgSaveAutoTime | read-only | current | The object records the latest date and time when the current configurations were saved automatically in the system. |
| 1.3.6.1.4.1.2011.6.10.1.3.3 | ScalarhwCfgSaveManualTime | read-only | current | The object records the latest date and time when the current configurations were saved manually in the system. |
| 1.3.6.1.4.1.2011.6.10.1.3.4 | ScalarhwCfgSaveAutoCpuLimit | read-write | current | This object indicates the upper limit of the CPU usage when configurations are automatically saved.If the function of saving configuration automatically is not… |
| 1.3.6.1.4.1.2011.6.10.1.3.5 | ScalarhwCfgSaveAutoNoCfgInterval | read-write | obsolete | This object indicates the interval from the time configurations are automatically saved to now.If the function of saving configuration automatically is not ena… |
| 1.3.6.1.4.1.2011.6.10.1.3.6 | ScalarhwCfgSaveAutoDelay | read-write | current | This object indicates the delay minute after some configurations change happens then configurations are automatically saved.If the function of saving configura… |
| 1.3.6.1.4.1.2011.6.10.1.3.7 | TablehwCfgBackup2ServerTable | not-accessible | current | A table of config-operation requests. |
| 1.3.6.1.4.1.2011.6.10.1.3.7.1 | RowhwCfgBackup2ServerEntry | not-accessible | current | An operate request entry. |
| 1.3.6.1.4.1.2011.6.10.1.3.7.1.1 | ColumnhwCfgBackupIndex | accessible-for-notify | current | The unique index value of a row in this table. |
| 1.3.6.1.4.1.2011.6.10.1.3.7.1.2 | ColumnhwCfgBackupServerIp | read-create | current | The ip address of the FTP/TFTP/SFTP server to which to the device backup configuration automatically. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted. |
| 1.3.6.1.4.1.2011.6.10.1.3.7.1.3 | ColumnhwCfgBackupProtocol | read-create | current | The protocol used to backup configuration to server automatically. |
| 1.3.6.1.4.1.2011.6.10.1.3.7.1.4 | ColumnhwCfgBackupUser | read-create | current | The length of the user name should range from 1 to 64. |
| 1.3.6.1.4.1.2011.6.10.1.3.7.1.5 | ColumnhwCfgBackupPassword | read-create | current | The password can be plain text or encripted text. If the password is plain text, its length should range from 0 to 255. If the password is in cipher text, its … |
| 1.3.6.1.4.1.2011.6.10.1.3.7.1.6 | ColumnhwCfgBackupServerPath | read-create | current | The length of the path in the backup server should range from 1 to 64. |
| 1.3.6.1.4.1.2011.6.10.1.3.7.1.7 | ColumnhwCfgBackupRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.2011.6.10.1.3.7.1.8 | ColumnhwCfgBackupResult | read-only | current | This object is only for trap information, and does not support get and get-next operation. |
| 1.3.6.1.4.1.2011.6.10.1.3.7.1.9 | ColumnhwCfgBackupVpnInstance | read-create | current | The VPN instance name that through which to transfer the file. |
| 1.3.6.1.4.1.2011.6.10.1.4 | NodehwCfgLock | |||
| 1.3.6.1.4.1.2011.6.10.1.4.1 | ScalarhwCfgOperateLockConfigDataStore | read-write | current | Config data unit lock/unlock controller,if set active(2),the lock will be locked if no one locked it before. if set inactive(1),the lock will be unlocked if th… |
| 1.3.6.1.4.1.2011.6.10.1.4.2 | TablehwCfgOperateLevelUsersTable | not-accessible | current | Table on users of configuration lock or level. |
| 1.3.6.1.4.1.2011.6.10.1.4.2.1 | RowhwCfgOperateLevelUsersEntry | not-accessible | current | Users entity on lock or level of the configuration module. |
| 1.3.6.1.4.1.2011.6.10.1.4.2.1.1 | ColumnhwCfgOperateLevelUsersSessionID | read-only | current | SessionID of users who have the configuration level or have locked the configuration. |
| 1.3.6.1.4.1.2011.6.10.1.4.2.1.2 | ColumnhwCfgOperateLevelUsersSessionDesc | read-only | current | Description of users who have the configuration level or have locked the configuration. |
| 1.3.6.1.4.1.2011.6.10.1.4.2.1.3 | ColumnhwCfgOperateLevelUsersName | read-only | current | UserName of users who have the configuration level or have locked the configuration. |
| 1.3.6.1.4.1.2011.6.10.1.4.2.1.4 | ColumnhwCfgOperateLevelUsersLockedTime | read-only | current | LoginTime of users who have the configuration level or have locked the configuration. |
| 1.3.6.1.4.1.2011.6.10.1.4.2.1.5 | ColumnhwCfgOperateLevelUsersIPAddr | read-only | current | IP Address of users who have the configuration level or have locked the configuration. |
| 1.3.6.1.4.1.2011.6.10.1.4.2.1.6 | ColumnhwCfgOperateLevelUsersLastCfgTime | read-only | current | The last configurate Time of users who have the configuration level or have locked the configuration. |
| 1.3.6.1.4.1.2011.6.10.1.4.2.1.7 | ColumnhwCfgOperateLevelUsersTimeout | read-only | current | Unlock without configuration seconds, 1-7200, the default is 30 |
| 1.3.6.1.4.1.2011.6.10.2 | NodehwConfigManNotifications | |||
| 1.3.6.1.4.1.2011.6.10.2.1 | NotificationhwCfgManEventlog | current | If the system configuration is changed, a notification is generated. | |
| 1.3.6.1.4.1.2011.6.10.2.2 | NotificationhwCfgOperateCompletion | current | When a configuration operation has been done, a notification may be generated. | |
| 1.3.6.1.4.1.2011.6.10.2.3 | NotificationhwCfgInconsistent | obsolete | When the system automatically detects that configurations of the AMB and the SMB are inconsistent, the trap is generated. | |
| 1.3.6.1.4.1.2011.6.10.2.4 | NotificationhwCfgInconsistentResume | obsolete | When the system automatically detects that configurations of the AMB and the SMB change from inconsistent to consistent, the trap is generated. | |
| 1.3.6.1.4.1.2011.6.10.2.5 | NotificationhwCfgB2STransferFail | current | When the system failed to backup current configuration to specified server, this trap will generate to indicates the details information. | |
| 1.3.6.1.4.1.2011.6.10.2.6 | NotificationhwCfgB2SOperate | current | When the system begin to backup current configuration to servers, this trap will generate. | |
| 1.3.6.1.4.1.2011.6.10.2.7 | NotificationhwCfgRestoreFail | current | When configuration restoration fails, this trap is generated. | |
| 1.3.6.1.4.1.2011.6.10.2.9 | NotificationhwConfigInconsistent | current | When system automatically detects that configurations of the main board and the slave board are inconsistent, this trap is generated. | |
| 1.3.6.1.4.1.2011.6.10.2.10 | NotificationhwConfigInconsistentResume | current | When system automatically detects that configurations of the main board and the slave board change from inconsistent to consistent, this trap is generated. | |
| 1.3.6.1.4.1.2011.6.10.2.11 | NotificationhwCfgAppDataInconsistent | current | When the system automatically detects that configurations of the application and the Master Main Board are inconsistent, the trap is generated. | |
| 1.3.6.1.4.1.2011.6.10.2.12 | NotificationhwCfgAppDataInconsistentResume | current | When the system automatically detects that configurations of the application and the Master Main Board change from inconsistent to consistent, the trap is gene… | |
| 1.3.6.1.4.1.2011.6.10.3 | NodehwConfigManConformance | |||
| 1.3.6.1.4.1.2011.6.10.3.1 | NodehwConfigManCompliances | |||
| 1.3.6.1.4.1.2011.6.10.3.1.1 | CompliancehwConfigManCompliance | current | The compliance statement for entities implementing the Huawei Configuration Management MIB | |
| 1.3.6.1.4.1.2011.6.10.3.2 | NodehwConfigManGroups | |||
| 1.3.6.1.4.1.2011.6.10.3.2.1 | GrouphwCfgManLogGroup | current | A collection of objects configuration log group. | |
| 1.3.6.1.4.1.2011.6.10.3.2.2 | GrouphwCfgOperateGroup | current | A group of configuration operation. | |
| 1.3.6.1.4.1.2011.6.10.3.2.3 | GrouphwCfgManNotificationGroup | current | Collection of notification objects. | |
| 1.3.6.1.4.1.2011.6.10.3.2.4 | GrouphwCfgSaveGroup | current | A group of configuration operation. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ConfigOperationType | INTEGER { running2Startup(1), startup2Running(2), running2Net(3), net2Running(4), net2Startup(5), startup2Net(6) } | current | Specify operation types on configuration. Currently, following types of operation are provided: running2Startup(1):refresh the saved configuration file used currently with current configuration running in the system. Th… |