HUAWEI-DC-TRAP-MIB
138 objects
The HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS.
Imported Objects
| ENTITY-MIB | entPhysicalName |
| HUAWEI-MIB | hwDatacomm |
| RFC1213-MIB | ifDescr ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.37 | IdentityhwDCTrapMIB | The HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS. | ||
| 1.3.6.1.4.1.2011.5.25.37.1 | NodehwDCTrapControl | |||
| 1.3.6.1.4.1.2011.5.25.37.1.1 | ScalarhwDCCtrlTrap | read-write | current | A string serving as a bit map for the trap events defined by the hwDatacomm traps. This object is used to enable and disable specific hwDatacomm traps where a … |
| 1.3.6.1.4.1.2011.5.25.37.1.2 | ScalarhwTunnelGroupID | accessible-for-notify | current | Tunnel id |
| 1.3.6.1.4.1.2011.5.25.37.1.3 | ScalarhwDCTrapReason | accessible-for-notify | current | For the BTB system to report Trap Reason. |
| 1.3.6.1.4.1.2011.5.25.37.2 | NodehwDCTraps | |||
| 1.3.6.1.4.1.2011.5.25.37.2.1 | NotificationhwMPUSynClkFaulty | current | MPU sync clock signal faulty! | |
| 1.3.6.1.4.1.2011.5.25.37.2.2 | NotificationhwMPUSynClkFaultyResume | current | MPU sync clock signal faulty resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.3 | NotificationhwSlaveMPUNoResp | current | Slave MPU has no response! | |
| 1.3.6.1.4.1.2011.5.25.37.2.4 | NotificationhwSlaveMPUNoRespResume | current | Slave MPU has no response resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.5 | NotificationhwBrdChannelFaulty | current | Board channel faulty! | |
| 1.3.6.1.4.1.2011.5.25.37.2.6 | NotificationhwBrdChannelFaultyResume | current | Board channel faulty resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.7 | NotificationhwBrdNofullin | current | Board not full in! | |
| 1.3.6.1.4.1.2011.5.25.37.2.8 | NotificationhwBrdNofullinResume | current | Board not full in resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.9 | NotificationhwBrdTypeNoMatchReset | current | Board is reset because of the chip type is not matching! | |
| 1.3.6.1.4.1.2011.5.25.37.2.10 | NotificationhwBrdAutoSwtFail | current | Board automatically switch syn-clock but it locked failed! | |
| 1.3.6.1.4.1.2011.5.25.37.2.11 | NotificationhwBrdAutoSwt | current | Board automatically switch syn-clock! | |
| 1.3.6.1.4.1.2011.5.25.37.2.12 | NotificationhwBrdClkLockERR | current | Board fabric clock is unlocked! | |
| 1.3.6.1.4.1.2011.5.25.37.2.13 | NotificationhwBrdClkLockERRResume | current | Board fabric clock unlock to current clock resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.14 | NotificationhwBrdRemoved | current | Board pulled out! | |
| 1.3.6.1.4.1.2011.5.25.37.2.15 | NotificationhwBrdInserted | current | Board plugged in! | |
| 1.3.6.1.4.1.2011.5.25.37.2.16 | NotificationhwBrdUp | current | Board register! | |
| 1.3.6.1.4.1.2011.5.25.37.2.17 | NotificationhwClkSrcMiss | current | CLK source Loss Of Signal! | |
| 1.3.6.1.4.1.2011.5.25.37.2.18 | NotificationhwClkAllSrcLost | current | CLK all source lost! | |
| 1.3.6.1.4.1.2011.5.25.37.2.19 | NotificationhwClkAllSrcLostResume | current | CLK all source lost resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.20 | NotificationhwClkFail | current | CLK hardware failed! | |
| 1.3.6.1.4.1.2011.5.25.37.2.21 | NotificationhwClkFailResume | current | CLK hardware failed resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.22 | NotificationhwClkNoHeartbeat | current | CLK No Heartbeat! | |
| 1.3.6.1.4.1.2011.5.25.37.2.23 | NotificationhwClkNoHeartbeatResume | current | CLK No Heartbeat resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.24 | NotificationhwLPULostSynAlarm | current | LPU SERDES interface is lost synchronization! | |
| 1.3.6.1.4.1.2011.5.25.37.2.25 | NotificationhwLPUOpenChannelError | current | LPU SERDES interface open error! | |
| 1.3.6.1.4.1.2011.5.25.37.2.26 | NotificationhwLPUSlfTstErr | current | LPU self test error! | |
| 1.3.6.1.4.1.2011.5.25.37.2.27 | NotificationhwLPU3ClkSwitch | current | LPU 3 class clock is switch! | |
| 1.3.6.1.4.1.2011.5.25.37.2.28 | NotificationhwSFULostHrtReset | current | SFU is reset because of heart beat loss! | |
| 1.3.6.1.4.1.2011.5.25.37.2.29 | NotificationhwSFULinkLostReset | current | SFU is reset because of SERDES interface input channel link lost numbers over threshold! | |
| 1.3.6.1.4.1.2011.5.25.37.2.30 | NotificationhwSFUChannelLinkLost | current | SFU check SERDES interface input channel link lost! | |
| 1.3.6.1.4.1.2011.5.25.37.2.31 | NotificationhwSFUInChannelOpenFail | current | SFU SERDES interface input channel is opened failed! | |
| 1.3.6.1.4.1.2011.5.25.37.2.32 | NotificationhwVoltSensorFail | current | Board voltage monitor failure! | |
| 1.3.6.1.4.1.2011.5.25.37.2.33 | NotificationhwVoltSensorFailResume | current | Board voltage monitor failure resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.34 | NotificationhwVoltBtmC | current | Board voltage below fatal threshold! | |
| 1.3.6.1.4.1.2011.5.25.37.2.35 | NotificationhwVoltBtmCResume | current | Board voltage below fatal threshold resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.36 | NotificationhwVoltSprC | current | Board voltage over fatal threshold! | |
| 1.3.6.1.4.1.2011.5.25.37.2.37 | NotificationhwVoltSprCResume | current | Board voltage over fatal threshold resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.38 | NotificationhwVoltBtmM | current | Board voltage below major threshold! | |
| 1.3.6.1.4.1.2011.5.25.37.2.39 | NotificationhwVoltBtmMResume | current | Board voltage below major threshold resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.40 | NotificationhwVoltSprM | current | Board voltage over major threshold! | |
| 1.3.6.1.4.1.2011.5.25.37.2.41 | NotificationhwVoltSprMResume | current | Board voltage over major threshold resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.42 | NotificationhwTempSensorFail | current | Board temprature monitor failure! | |
| 1.3.6.1.4.1.2011.5.25.37.2.43 | NotificationhwTempSensorFailResume | current | Board temperature monitor failure resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.44 | NotificationhwTempMnr | current | Board temperature over minor threshold! | |
| 1.3.6.1.4.1.2011.5.25.37.2.45 | NotificationhwTempMnrResume | current | Board temperature over minor threshold resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.46 | NotificationhwTempMjr | current | Board temperature over major threshold! | |
| 1.3.6.1.4.1.2011.5.25.37.2.47 | NotificationhwTempMjrResume | current | Board temperature over major threshold resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.48 | NotificationhwTempCtl | current | Board temperature over fatal threshold! | |
| 1.3.6.1.4.1.2011.5.25.37.2.49 | NotificationhwTempCtlResume | current | Board temperature over fatal threshold resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.50 | NotificationhwFanHFail | current | Fan hardware failure! | |
| 1.3.6.1.4.1.2011.5.25.37.2.51 | NotificationhwFanFail | current | Fan failure! | |
| 1.3.6.1.4.1.2011.5.25.37.2.52 | NotificationhwFanFailResume | current | Fan failure resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.53 | NotificationhwFanAbsent | current | Fan absent! | |
| 1.3.6.1.4.1.2011.5.25.37.2.54 | NotificationhwFanAbsentResume | current | Fan absent resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.55 | NotificationhwFanCabUN | current | Fan cable unplugged! | |
| 1.3.6.1.4.1.2011.5.25.37.2.56 | NotificationhwFanCabUNResume | current | Fan cable unplugged resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.57 | NotificationhwPwrFail | current | Power failure! | |
| 1.3.6.1.4.1.2011.5.25.37.2.58 | NotificationhwPwrFailResume | current | Power failure resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.59 | NotificationhwPwrAbsent | current | Power absent! | |
| 1.3.6.1.4.1.2011.5.25.37.2.60 | NotificationhwPwrAbsentResume | current | Power absent resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.61 | NotificationhwPwrCabUN | current | Power monitor cable unplugged! | |
| 1.3.6.1.4.1.2011.5.25.37.2.62 | NotificationhwPwrCabUNResume | current | Power monitor cable unplugged resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.63 | NotificationhwLCDHFail | current | LCD hardware failure! | |
| 1.3.6.1.4.1.2011.5.25.37.2.64 | NotificationhwLCDFail | current | LCD failure! | |
| 1.3.6.1.4.1.2011.5.25.37.2.65 | NotificationhwLCDAbsent | current | LCD absent! | |
| 1.3.6.1.4.1.2011.5.25.37.2.66 | NotificationhwLCDAbsentResume | current | LCD absent resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.67 | NotificationhwLCDCabUN | current | LCD cable unplugged! | |
| 1.3.6.1.4.1.2011.5.25.37.2.68 | NotificationhwLCDCabUNResume | current | LCD cable unplugged resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.69 | NotificationhwROMFail | current | EEPROM failure! | |
| 1.3.6.1.4.1.2011.5.25.37.2.70 | NotificationhwMonitorBUSFail | current | MonitorBUS failure! | |
| 1.3.6.1.4.1.2011.5.25.37.2.71 | NotificationhwMonitorBUSFailResume | current | MonitorBUS failure resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.72 | NotificationhwBoardOfflineChange | current | Board power status change! | |
| 1.3.6.1.4.1.2011.5.25.37.2.100 | NotificationhwWriteFlashError | current | write flash error! | |
| 1.3.6.1.4.1.2011.5.25.37.2.101 | NotificationhwBoardReset | current | board reset! | |
| 1.3.6.1.4.1.2011.5.25.37.2.102 | NotificationhwBoardResetSuccess | current | board reset success! | |
| 1.3.6.1.4.1.2011.5.25.37.2.103 | NotificationhwSlaveMPUReset | current | slave MPU reset ! | |
| 1.3.6.1.4.1.2011.5.25.37.2.104 | NotificationhwMasterSlaveSwap | current | master slave swap! | |
| 1.3.6.1.4.1.2011.5.25.37.2.105 | NotificationhwRTCFail | current | RTC failure! | |
| 1.3.6.1.4.1.2011.5.25.37.2.106 | NotificationhwExchangeChipFail | current | 5695 exchange chip fail! | |
| 1.3.6.1.4.1.2011.5.25.37.2.107 | NotificationhwTempResume | current | Board temprature over threshold resume! | |
| 1.3.6.1.4.1.2011.5.25.37.2.108 | NotificationhwOpticalModuleInsert | current | optical module plug in ! | |
| 1.3.6.1.4.1.2011.5.25.37.2.109 | NotificationhwOpticalModuleRemove | current | optical module plug out ! | |
| 1.3.6.1.4.1.2011.5.25.37.2.110 | NotificationhwFPGAAbnormal | current | FPGA abnormal ! | |
| 1.3.6.1.4.1.2011.5.25.37.2.111 | NotificationhwMinMTunnelDownAlarm | current | For Mac in Mac tunnel. Mac tunnel have two status: up or down, when physical interface is down or some cc package can't arrive to the other side of mac in mac … | |
| 1.3.6.1.4.1.2011.5.25.37.2.112 | NotificationhwMinMTunnelUpAlarm | current | For Mac in Mac tunnel. Mac tunnel have two status: up or down, if cc package can arrive to the other side of mac in mac tunnel, the status of tunnel will be up… | |
| 1.3.6.1.4.1.2011.5.25.37.2.113 | NotificationhwInterfacePhysicalDown | current | This trap is to indicate port link down on physical layer. | |
| 1.3.6.1.4.1.2011.5.25.37.2.114 | NotificationhwInterfacePhysicalUp | current | This trap is to indicate port link up on physical layer. | |
| 1.3.6.1.4.1.2011.5.25.37.2.119 | NotificationhwBTBStartupFileNameDifferent | current | In the BTB system ,the start-up file name of master and slave chassis is different . Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.120 | NotificationhwBTBChassisRunningModeConflict | current | The Master and Slave chassises running modes conflict.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.121 | NotificationhwBTBCtrlChannelFail | current | The FE control channel failture, as physical link from up to down or channel blocked. Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.122 | NotificationhwBTBCtrlChannelFailResume | current | The FE control channel failture resume.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.123 | NotificationhwBTBDataChannelFail | current | The data channel failture, all optical links down between chassises.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.124 | NotificationhwBTBDataChannelFailResume | current | The data channel failture resume.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.125 | NotificationhwBTBClkChannelFail | current | The clock channel failture, clock link down between chassises.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.126 | NotificationhwBTBClkChannelFailResume | current | The clock Channel failture resume.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.127 | NotificationhwBTBSFUOpticInterfaceError | current | The optical fiber connection error, the connection of SFU fiber between chassises is not correct. Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.128 | NotificationhwBTBSFUOpticInterfaceErrorResume | current | The optical fiber connection error resume.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.129 | NotificationhwBTBVSRInterfaceInvalid | current | The SFU VSR(very short reach) interface invalid.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.130 | NotificationhwBTBVSRInterfaceInvalidResume | current | The SFU VSR(very short reach) interface invalid resume.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.131 | NotificationhwBTBSlaveChassisNoHeart | current | The slave chassis no heart.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.132 | NotificationhwBTBNoSlaveChassis | current | No slave chassis connected to the master chassis in the BTB system.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.133 | NotificationhwBTBSlaveChassisRegisted | current | The slave chassis registe successful.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.134 | NotificationhwBTBSlaveChassisRegisteFail | current | The slave chassis registe failed.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.135 | NotificationhwBTBChassisTypeConflict | current | The chassis information conflict in the PAF and Nvram.Used for BTB or its extend system. | |
| 1.3.6.1.4.1.2011.5.25.37.2.136 | NotificationhwSuperChangeSuccesful | current | Super change successful. | |
| 1.3.6.1.4.1.2011.5.25.37.2.137 | NotificationhwSuperChangeFailure | current | Super change Failure. | |
| 1.3.6.1.4.1.2011.5.25.37.2.138 | NotificationhwOpticaPowerAbnormal | current | Optical Transceiver power abnormal. | |
| 1.3.6.1.4.1.2011.5.25.37.2.139 | NotificationhwEpldAbnormal | current | Epld logic abnormal. | |
| 1.3.6.1.4.1.2011.5.25.37.2.140 | NotificationhwPhyChipAbnormal | current | PHY chip is abnormal. | |
| 1.3.6.1.4.1.2011.5.25.37.2.141 | NotificationhwSerdesAbnormal | current | Serdes interface of PHY chip abnormal. | |
| 1.3.6.1.4.1.2011.5.25.37.2.142 | NotificationhwBoardAbnormal | current | Board is abnormal. | |
| 1.3.6.1.4.1.2011.5.25.37.2.143 | NotificationhwFeChannelAbnormal | current | FE data channel is abnormal | |
| 1.3.6.1.4.1.2011.5.25.37.2.144 | NotificationhwParityCheckAbnormal | current | Data parity check is abnormal | |
| 1.3.6.1.4.1.2011.5.25.37.2.145 | NotificationhwPhyClockAbnormal | current | The clock of PHY chip is abnormal. | |
| 1.3.6.1.4.1.2011.5.25.37.2.146 | NotificationhwPortAutoNegotiateFail | current | The ethernet port negotiate failed | |
| 1.3.6.1.4.1.2011.5.25.37.2.147 | NotificationhwPortSemiduplex | current | The ethernet port work at semi duplex state. | |
| 1.3.6.1.4.1.2011.5.25.37.2.148 | NotificationhwScuStartModeSetFail | current | The start mode of SCU set failed | |
| 1.3.6.1.4.1.2011.5.25.37.2.149 | NotificationhwMemoryExhaust | current | MPU memory exhaust. | |
| 1.3.6.1.4.1.2011.5.25.37.2.150 | NotificationhwMemoryExhaustClear | current | MPU memory usage resume to normal. | |
| 1.3.6.1.4.1.2011.5.25.37.2.151 | NotificationhwMethAbnormal | current | The Meth interface is abnormal. | |
| 1.3.6.1.4.1.2011.5.25.37.2.152 | NotificationhwLpuNotTight | current | The LPU board is not tightly installed. Install the board again. | |
| 1.3.6.1.4.1.2011.5.25.37.2.153 | NotificationhwLicenseFail | current | License fail. | |
| 1.3.6.1.4.1.2011.5.25.37.2.154 | NotificationhwHaBatchBegin | current | No command line can be entered because batch backup is processing. | |
| 1.3.6.1.4.1.2011.5.25.37.2.155 | NotificationhwHaBatchEnd | current | Command lines can be entered because batch backup ends. | |
| 1.3.6.1.4.1.2011.5.25.37.2.156 | NotificationhwHaSmoothBegin | current | No command line can be entered because data smooth is processing. | |
| 1.3.6.1.4.1.2011.5.25.37.2.157 | NotificationhwHaSmoothEnd | current | Command lines can be entered because data smooth ends. | |
| 1.3.6.1.4.1.2011.5.25.37.3 | NodehwDCTrapConformance | |||
| 1.3.6.1.4.1.2011.5.25.37.3.1 | NodehwDCTrapGroups | |||
| 1.3.6.1.4.1.2011.5.25.37.3.1.1 | GrouphwDCTrapControlGroup | current | These objects are required to control traps from hwDatacomm Traps systems. | |
| 1.3.6.1.4.1.2011.5.25.37.3.1.2 | GrouphwDCNotificationGroup | current | The notification group defined for Datacomm products. | |
| 1.3.6.1.4.1.2011.5.25.37.3.2 | NodehwDCTrapCompliances | |||
| 1.3.6.1.4.1.2011.5.25.37.3.2.1 | CompliancehwDCTrapCompliance | current | The compliance statement. |