HUAWEI-DEVICE-MIB
524 objects
The MIB module defines MIB objects which provide device management NMS interfaces.
Imported Objects
| HCNUM-TC | CounterBasedGauge64 |
| HUAWEI-MIB | huaweiUtility |
| HUAWEI-TC-MIB | HWFrameType HWPCBType HWPortType HWSubPCBType |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.3 | IdentityhwDev | of | The MIB module defines MIB objects which provide device management NMS interfaces. | |
| 1.3.6.1.4.1.2011.6.3.1 | NodehwSystemPara | |||
| 1.3.6.1.4.1.2011.6.3.1.1 | ScalarhwSysIpAddr | read-write | current | IP address of the system. It'd better not to modify this address when out-band NMS is used. It will take no effect to separately configure IP address or IP add… |
| 1.3.6.1.4.1.2011.6.3.1.2 | ScalarhwSysIpMask | read-write | current | IP address mask of the system. This object can take effect only when hwSysIpAddr is also set. |
| 1.3.6.1.4.1.2011.6.3.1.3 | ScalarhwSysVersion | read-only | current | The system software version format is consistent with the specification of HUAWEI product.For example, MA5600V800R008C00. |
| 1.3.6.1.4.1.2011.6.3.1.4 | ScalarhwSysTime | read-write | current | This object is used for getting or setting current date and time of the system. |
| 1.3.6.1.4.1.2011.6.3.1.5 | ScalarhwSysWorkMode | read-only | current | This object is used for obtaining the working mode of the UA5000. Options: 1. amsanamsan(1) -indicates that the active and standby control boards are in positi… |
| 1.3.6.1.4.1.2011.6.3.1.6 | ScalarhwSysAverageBufferUsed | read-only | current | Query the average memory usage of the system. Collect the sum of the memory usage of all the boards that support memory query in the system, and then calculate… |
| 1.3.6.1.4.1.2011.6.3.1.7 | ScalarhwSysRsvedVlan | read-only | current | Describes the start VLAN ID of the reserved VLANs currently used by the system. Default: 4079 The system automatically uses the 15 VLANs starting from the conf… |
| 1.3.6.1.4.1.2011.6.3.1.8 | ScalarhwSysRsvedVlanDb | read-write | current | Describes the start VLAN ID of the reserved VLANs configured in the system. The configuration takes effect after system restart. Range: 2-4079 Default: 4079 Th… |
| 1.3.6.1.4.1.2011.6.3.1.9 | ScalarhwIopacketVersion | read-only | current | The version information in the IO package, which is consistent with the system version information. |
| 1.3.6.1.4.1.2011.6.3.1.10 | ScalarhwSysWorkScenario | read-write | current | System work scenario. Used to identify whether the control board is in the upgrade(2) or normal(1) scenario. Options: 1. normal(1) -the normal scene of the sys… |
| 1.3.6.1.4.1.2011.6.3.1.11 | ScalarhwSysTemperatureHighThreshold | read-write | current | The threshold of the system. When you set a high temperature threshold, you also need to set a low temperature threshold. Range:40~105 The invalid value is 655… |
| 1.3.6.1.4.1.2011.6.3.1.12 | ScalarhwSysTemperatureLowThreshold | read-write | current | The threshold of the system. When you set a low temperature threshold, you also need to set a high temperature threshold. Range:-40~20 The invalid value is 655… |
| 1.3.6.1.4.1.2011.6.3.1.13 | ScalarhwSysExchangeMode | read-only | current | System Exchange-Mode, Options: 1. backup(1) -indicates active/standby mode. Two control boards serve as the active and standby control boards respectively. The… |
| 1.3.6.1.4.1.2011.6.3.1.14 | ScalarhwSysActivePatch | read-only | current | Display the information of the active patches in current system. |
| 1.3.6.1.4.1.2011.6.3.1.15 | ScalarhwSysDeactivePatch | read-only | current | This object is used for querying the information about the deactivated patch in the current system. |
| 1.3.6.1.4.1.2011.6.3.1.16 | ScalarhwSystemAutoConfigStatus | read-write | current | GE uplink software commissioning free configuration. Options: 1.enable(1) -the default value is enable 2.disable(2) -this object is no longer used |
| 1.3.6.1.4.1.2011.6.3.1.17 | ScalarhwSystemEnergySavingSwitch | read-write | current | The energy-saving mode of system. Options: 1.basic(1) -when it is set to basic(1), the system energy saving mode is basic mode. 2.deep(2) -when it is set to de… |
| 1.3.6.1.4.1.2011.6.3.1.18 | ScalarhwSysEncoding | read-write | current | The encoding mode of characters in the system. Options: 1. default(1) -indicates that the encoding mode is no set 2. gbk(2) -indicates that the encoding mode o… |
| 1.3.6.1.4.1.2011.6.3.1.19 | ScalarhwSysUpdateBoardVersion | read-write | current | Update Board Version Options: 1.updateBoardVersion(1) -set operation only |
| 1.3.6.1.4.1.2011.6.3.1.20 | ScalarhwSysUpdateBoardMaxTimeLen | read-write | current | Update Board Version Max Time Len |
| 1.3.6.1.4.1.2011.6.3.1.21 | ScalarhwSystemAdminStateMode | read-write | current | System admin state mode. DEFVAL { private } Options: 1.grStandard(1) -grStandard mode complies with GR series standard(such as GR-1093, used in North America).… |
| 1.3.6.1.4.1.2011.6.3.1.22 | ScalarhwSystemAdminStatus | read-write | current | The system admin status. Options: 1. nooperation(-1) -default state of the system. 2. is(1) -in service 3. oos(2) -out of service |
| 1.3.6.1.4.1.2011.6.3.1.23 | ScalarhwSystemPrimaryStatus | read-only | current | The system primary status. Options: 1. isNr(1) -in Service, normal 2. isAnr(2) -in service, abnormal 3. isRst(3) -in service, restricted 4. isAnrst(4) -in serv… |
| 1.3.6.1.4.1.2011.6.3.1.24 | ScalarhwDeviceArchType | read-only | current | The hardware structure type of a device. Currently, the hardware structure types of the existing versions are as follows: Options: 1.arch1(1) -in MxUV8R305, th… |
| 1.3.6.1.4.1.2011.6.3.1.25 | ScalarhwUplinkSysIPAddr | read-write | current | The IP address of the uplink system of PVM, it is only used when PVM worked in integrated mode and the IPM worked as the uplink board. |
| 1.3.6.1.4.1.2011.6.3.1.26 | ScalarhwSysMainBoardTypeDesc | read-only | current | The mainboard description. |
| 1.3.6.1.4.1.2011.6.3.1.27 | ScalarhwSysEnergySaving | read-write | current | The automatic energy saving function consists of seven sub-functions, which are indicated by bits .All bits are disabled by default. If a bit is 0, the represe… |
| 1.3.6.1.4.1.2011.6.3.1.28 | ScalarhwSysSceneMode | read-only | current | The device work scene. Options: 1. olt(1) -work in OLT scene 2. msan(3) -work in MSAN scene |
| 1.3.6.1.4.1.2011.6.3.1.29 | ScalarhwSysFtpXmlConfigure | read-only | current | The state of XML file. Options: 1. useful(1) -Xml file is useful 2. useless(2) -Xml file is useless |
| 1.3.6.1.4.1.2011.6.3.1.30 | ScalarhwSysCentralizedMgmtPrimary | read-write | current | The primary mode for centralized management. Options: 1. extendFrame(1) -Extended frame management 2. standAlone(2) -Stand alone management |
| 1.3.6.1.4.1.2011.6.3.1.31 | ScalarhwUpgradeVerifyVersion | read-only | current | The system software version used in update scene for HUAWEI product.For example, MA5600V800R008C00. |
| 1.3.6.1.4.1.2011.6.3.1.32 | ScalarhwDevLongitude | read-write | current | The longitude of the device. The value expands 100000 times and the value 2147483647 indicates invalid longitude. |
| 1.3.6.1.4.1.2011.6.3.1.33 | ScalarhwDevLatitude | read-write | current | The latitude of the device. The value expands 100000 times and the value 2147483647 indicates invalid latitude. |
| 1.3.6.1.4.1.2011.6.3.1.34 | ScalarhwDevElevation | read-write | current | The elevation of the device, in unit of meters. The value 32767 indicates invalid elevation. |
| 1.3.6.1.4.1.2011.6.3.1.35 | ScalarhwDevHorizontalErr | read-write | current | The horizontal error of the device, in unit of meters. The value 4294967295 indicates invalid horizontal error. |
| 1.3.6.1.4.1.2011.6.3.1.36 | ScalarhwDevAltitudeErr | read-write | current | The altitude error of the device, in unit of meters. The value 4294967295 indicates invalid altitude error. |
| 1.3.6.1.4.1.2011.6.3.1.37 | ScalarhwDevAreaCode | read-write | current | The area code of the device. The length of area code is 12. The characters can be 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9. The zero-length string indicates invalid are… |
| 1.3.6.1.4.1.2011.6.3.1.38 | ScalarhwDevGisTimeStamp | read-write | current | The time stamp of the measurement signature, which is the number of seconds from 00:00 on January 1, 1970 to the current time. The value 4294967295 indicates i… |
| 1.3.6.1.4.1.2011.6.3.1.39 | ScalarhwDevGisDigest | read-write | current | The check value of the measurement signature. The length of check value is 16. The characters can be 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E and F. The zer… |
| 1.3.6.1.4.1.2011.6.3.1.40 | ScalarhwDevGisCheckCode | read-write | current | The check code of the device GPS information. The length of check code is 4. The characters can be 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E and F. The zero-… |
| 1.3.6.1.4.1.2011.6.3.1.41 | ScalarhwSysSsdSwitch | read-write | current | The secure software downloading status. Options: 1. enable(1) -The secure software downloading is enable 2. disable(2) -The secure software downloading is disa… |
| 1.3.6.1.4.1.2011.6.3.1.42 | ScalarhwSysFtpMode | read-write | current | FTP connection mode. Options: 1. port(1) -Set the FTP connection mode to port. 2. passive(2) -Set the FTP connection mode to passive. Default: port(1) |
| 1.3.6.1.4.1.2011.6.3.1.43 | ScalarhwSysMarketScene | read-only | current | The device options: 1. carrier(1) -Device work in carrier scene. 2. enterprise(2) -Device work in enterprise scene. Default: carrier(1) |
| 1.3.6.1.4.1.2011.6.3.1.999 | ScalarhwSysVersionVrcb | read-only | current | The device MIB build version, used by NMS for MIB adaption. |
| 1.3.6.1.4.1.2011.6.3.2 | TablehwNmsParaTable | not-accessible | current | The index of this table is hwNmsIndex. NMS parameters configuration table. This table is no longer used. |
| 1.3.6.1.4.1.2011.6.3.2.1 | RowhwNmsParaEntry | not-accessible | current | The index of this entry is hwNmsIndex. NMS parameters configuration table. This table is no longer used. |
| 1.3.6.1.4.1.2011.6.3.2.1.1 | ColumnhwNmsIndex | read-only | current | Index(1..32),at most supports 32 NMSs, exclusively identifies an NMS. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.2.1.2 | ColumnhwNmsName | read-write | current | Name of the NMS, which does not have to be consistent with that of the NMS workstation. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.2.1.3 | ColumnhwNmsIp | read-write | current | IP address of the NMS workstation that can be outband or inband address. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.2.1.4 | ColumnhwNmsMask | read-write | deprecated | IP address mask of the NMS workstation. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.2.1.5 | ColumnhwNmsMaintainMode | read-write | deprecated | Maintenance mode of NMS workstation. If the IP address of the NMS station is in-band, the mode must also be in-band. This object is no longer used. Options: 1.… |
| 1.3.6.1.4.1.2011.6.3.2.1.6 | ColumnhwNmsGetCommunity | read-write | current | Community authentication name used for SNMP protocol GET operation, default value: public. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.2.1.7 | ColumnhwNmsSetCommunity | read-write | current | Community authentication name used for SNMP protocol SET operation, default value: private. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.2.1.8 | ColumnhwNmsSnmpPort | read-write | deprecated | Snmp communication port of NMS workstation,default value:161. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.2.1.9 | ColumnhwNmsTrapPort | read-write | deprecated | Trap receive Port of NMS workstation, default value:162. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.2.1.10 | ColumnhwNmsClass | read-write | deprecated | Class of NMS station,default value is 3. This object is no longer used. Options: 1.ro(1) - read only 2.rw(2) - read write 3.rwWithTrap(3) - default value, read… |
| 1.3.6.1.4.1.2011.6.3.2.1.11 | ColumnhwNmsStatus | read-create | current | Operation status of NMS station. The NMS station can be added,deleted and modified. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.3 | NodehwSlotConf | |||
| 1.3.6.1.4.1.2011.6.3.3.1 | TablehwFrameTable | not-accessible | current | The index of this table is hwFrameTable. Shelf description table that describes basic information of a shelf. You can obtain the shelf information, including t… |
| 1.3.6.1.4.1.2011.6.3.3.1.1 | RowhwFrameEntry | not-accessible | current | The index of this entry is hwFrameTable. Shelf description table that describes basic information of a shelf. You can obtain the shelf information, including t… |
| 1.3.6.1.4.1.2011.6.3.3.1.1.1 | ColumnhwFrameIndex | read-only | current | The index of a shelf in the device. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.2 | ColumnhwFrameType | read-create | current | The type of a shelf, which can be obtained from HUAWEI-TC-MIB.mib. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.3 | ColumnhwFrameDesc | read-create | current | The description about the frame. It is used to describe some extra information. For convenient management, you can set the location of the room in which the sh… |
| 1.3.6.1.4.1.2011.6.3.3.1.1.4 | ColumnhwSlots | read-only | current | The number of physical slots in the shelf. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.5 | ColumnhwFrameOperStatus | read-only | current | The operation status of frame. Options: 1. normal(1) -indicates that the shelf is running normally 2. fault(2) -indicates that the shelf is faulty 3. other(3) … |
| 1.3.6.1.4.1.2011.6.3.3.1.1.6 | ColumnhwFrameAdminStatus | read-create | current | The administration status of frame. Options: 1. nooperation(-1) - default state of the system 2. disable(1) - indicates that the frame administration state is … |
| 1.3.6.1.4.1.2011.6.3.3.1.1.7 | ColumnhwFrameRowStatus | read-create | current | The device that supports the slave shelf allows you to add a shelf (createAndGo(4)) and delete a shelf (destroy(6)) only. The device that does not support the … |
| 1.3.6.1.4.1.2011.6.3.3.1.1.8 | ColumnhwBackplaneVersion | read-only | current | Backplane board version information. Use the new-line character \n (ACSII 0x0A) to space various version information. It mainly contains the following informat… |
| 1.3.6.1.4.1.2011.6.3.3.1.1.9 | ColumnhwBackplanePhySerialNum | read-only | current | The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.10 | ColumnhwFrameResetTimeout | read-write | current | Used to set the delay time of shelf reset, in unit of seconds. When you set hwFrameResetTimeout, you also need to set hwFrameAdminStatus to reset(3). If the sh… |
| 1.3.6.1.4.1.2011.6.3.3.1.1.11 | ColumnhwFrameCLEICode | read-only | current | Frame CLEI Code (COMMON LANGUAGE Location Identifier Code): Used to identify the location and the type of a telecommunication device. For the definition of the… |
| 1.3.6.1.4.1.2011.6.3.3.1.1.12 | ColumnhwFrameTypeName | read-only | current | Frame information description, to describe name information of the frame. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.13 | ColumnhwFrameExtendPort | read-write | current | The extending port of main frame which is used to connect extended frame. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.14 | ColumnhwFrameUplinkPort | read-only | current | The uplink port of extended frame. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.15 | ColumnhwFrameRackID | read-write | current | Indicates the ID of the rack. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.16 | ColumnhwFrameExtendingSubId | read-only | current | Sub ID of extending frame. If extend type is ETH, sub ID is 0xffffffff, it is invalid. If extend type is GPON, sub ID is ont ID, it is valid. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.17 | ColumnhwFrameExtendType | read-only | current | The type of extended frame connecting to the main frame, its value is the same as the ifType of the extending port. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.18 | ColumnhwFrameHardwareDesc | read-only | current | Hardware description of frame. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.19 | ColumnhwFrameGponDeviceSn | read-write | current | ONT serial number. The valid length of the serial number is 8, and 0 indicates that the node is not set. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.20 | ColumnhwFramePhySerialNum | read-only | current | The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself. |
| 1.3.6.1.4.1.2011.6.3.3.1.1.65536 | ColumnhwFrameQueryAssit | read-only | current | The number of assist frame of this frame. |
| 1.3.6.1.4.1.2011.6.3.3.2 | TablehwSlotTable | not-accessible | current | The board description table, used to manage the running status of boards and board information, such as description of boards, daughter board quantity and boar… |
| 1.3.6.1.4.1.2011.6.3.3.2.1 | RowhwSlotEntry | not-accessible | current | The board description table, used to manage the running status of boards and board information, such as description of boards, daughter board quantity and boar… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.1 | ColumnhwSlotIndex | read-only | current | A slot index is used to identify the location of a board in a shelf. You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex. For the hwFra… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.2 | ColumnhwSlotType | read-create | current | Board type, which is defined in HUAWEI-TC-MIB.mib. The board type supported by a slot varies. For example, a slot can be inserted with a power board only, but … |
| 1.3.6.1.4.1.2011.6.3.3.2.1.3 | ColumnhwSlotDesc | read-create | current | The description about the board, providing additional information about a board for users. For example, you can set the services supported by the board as the … |
| 1.3.6.1.4.1.2011.6.3.3.2.1.4 | ColumnhwSlotPcbVersion | read-only | deprecated | The PCB version information of the board. It has been discarded. The information of PCB version and other versions are described in the hwSlotVersion. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.5 | ColumnhwSlotVersion | read-only | current | The version information about the board. Refer to the technical specifications of Huawei Technologies Co., Ltd. Use the new-line character \n (ACSII 0x0A) to s… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.6 | ColumnhwSlotWorkMode | read-write | current | Board working mode that describes whether the board is working in main state or in standby with loadshare, nullbackup, voice, satop state. Options: 1. main(1) … |
| 1.3.6.1.4.1.2011.6.3.3.2.1.7 | ColumnhwSubSlots | read-only | current | The number of subboards(excluding the virtual daughter board) supported by the board. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.8 | ColumnhwSlotOperStatus | read-only | current | The running status of a board. Options: 1. null(1) -indicates that the board is null 2. normal(2) -indicates that the board is running normally 3. fault(3) -in… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.9 | ColumnhwSlotAdminStatus | read-create | current | Board status management. This object cannot be set simultaneously with hwSlotRowStatus or hwSlotWorkMode. Options: 1. nooperation(-1) -default state of the sys… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.10 | ColumnhwSlotRowStatus | read-create | current | Supported setting operations are createAndGo(4) and destroy(6). Options: 1. CreateAndGo(4) - When adding a board in offline mode, you must set the hwSlotType o… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.11 | ColumnhwSlotPhySerialNum | read-only | current | The vendor-specific serial number string for the board. The preferred value is the serial number string actually printed on the component itself. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.12 | ColumnhwSlotShutdownState | read-only | current | Shutdown state of the board. Options: 1. powerOffState(1) -indicates the power-off state 2. powerOnState(2) -indicates the power-on state This object is no lon… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.13 | ColumnhwSlotTemprature | read-only | current | The temperature of the board. (Unit:centigrade) The value 0X7FFFFFFF indicates invalid temperature. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.14 | ColumnhwSlotUpdateVersion | read-only | current | The message is reported if the current version of a board is inconsistent with the version saved in the flash memory. The contents of the message are as follow… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.15 | ColumnhwSlotAdminForceOOSTime | read-create | current | The timeout time before forcing to quit service of the board, in unit of minutes. Range: 1-1440 Default: 0 Unit: minutes |
| 1.3.6.1.4.1.2011.6.3.3.2.1.16 | ColumnhwSlotForceOOSTime | read-only | current | The remain time of the forcing to out of service. Unit:Minute |
| 1.3.6.1.4.1.2011.6.3.3.2.1.17 | ColumnhwSlotAdminForceOOSTimeoutWorkMode | read-create | current | The handling after the timeout time elapses when a board delays in quitting service. Options: 1. forced(1) - force to handle 2. cancel(2) - cancel handling |
| 1.3.6.1.4.1.2011.6.3.3.2.1.18 | ColumnhwSlotEndServiceMode | read-create | current | The mode in which a board quits service. Options: 1. immediate(1) -quit service immediately 2. graceful(2) -quit service later |
| 1.3.6.1.4.1.2011.6.3.3.2.1.19 | ColumnhwSlotCLEICode | read-only | current | Card CLEI Code(COMMON LANGUAGE Location Identifier Code): Used to identify the location and the type of a telecommunication device. For the definition of the C… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.20 | ColumnhwSlotNetworkRole | read-write | current | Indicates the network role of a board. Options: 1. cascade(1) -indicates the subtending side, which is used for subtending and capturing certain protocol packe… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.21 | ColumnhwSlotTypeName | read-only | current | Slot information description, to describe board name information of the slot. |
| 1.3.6.1.4.1.2011.6.3.3.2.1.22 | ColumnhwSlotPrimaryStatus | read-only | current | The primary status of the Board. Options: 1. isNr(1) -in Service, normal 2. isAnr(2) -in service, abnormal 3. isRst(3) -in service, restricted 4. isAnrst(4) -i… |
| 1.3.6.1.4.1.2011.6.3.3.2.1.23 | ColumnhwSlotSecondaryStatus | read-only | current | The secondary status of the board. This BITS structure can report the following status: 1. sstAins(0) -this bit position positively reports that the status of … |
| 1.3.6.1.4.1.2011.6.3.3.2.1.24 | ColumnhwSlotCreateTime | read-only | current | This object is used for getting the time of adding or creating a board. |
| 1.3.6.1.4.1.2011.6.3.3.3 | TablehwSubslotTable | not-accessible | current | Subslot description table that describes detailed information of each subslot attached to the board. The indexes of this table are hwFrameIndex, hwSlotIndex an… |
| 1.3.6.1.4.1.2011.6.3.3.3.1 | RowhwSubslotEntry | not-accessible | current | Subslot description table that describes detailed information of each subslot attached to the board. The indexes of this entry are hwFrameIndex, hwSlotIndex an… |
| 1.3.6.1.4.1.2011.6.3.3.3.1.1 | ColumnhwSubslotIndex | read-only | current | The index of a daughter board is determined by the physical position of the daughter board on the board. The hwSubslotIndex value of 65535 indicates virtual da… |
| 1.3.6.1.4.1.2011.6.3.3.3.1.2 | ColumnhwSubslotType | read-create | current | For the definition of the daughter board type, refer to the HUAWEI-TC-MIB.mib. When adding a daughter board on a board, you need to specify the type of the dau… |
| 1.3.6.1.4.1.2011.6.3.3.3.1.3 | ColumnhwSubslotPorts | read-only | current | The number of physical ports owned by the sub board. |
| 1.3.6.1.4.1.2011.6.3.3.3.1.5 | ColumnhwSubslotOperStatus | read-only | current | Operation status of the daughter board. Options: 1. uninstall(1) -indicates that the daughter board is not installed 2. normal(2) -indicates that the daughter … |
| 1.3.6.1.4.1.2011.6.3.3.3.1.7 | ColumnhwSubslotAdminStatus | read-create | current | Administration status of the daughter board in the subslot. This object is not used. Options: 1. nooperation(-1) -indicates the default state 2. disable(1) -in… |
| 1.3.6.1.4.1.2011.6.3.3.3.1.8 | ColumnhwSubslotVersion | read-only | current | daughter board version information, obtained from the version information about the board on which the daughter board is located. Refer to the hwSlotVersion in… |
| 1.3.6.1.4.1.2011.6.3.3.3.1.9 | ColumnhwSubSlotDesc | read-create | current | The description about the daughter board. Do not support the setting operation. |
| 1.3.6.1.4.1.2011.6.3.3.3.1.10 | ColumnhwSubslotRowStatus | read-create | current | Only the operation of adding a daughter board, that is, setting createAndGo(4), is supported. When adding a daughter board, you must set the hwSubslotType obje… |
| 1.3.6.1.4.1.2011.6.3.3.3.1.11 | ColumnhwSubSlotPhySerialNum | read-only | current | The vendor-specific serial number string for the daughter board. The preferred value is the serial number string actually printed on the component itself. |
| 1.3.6.1.4.1.2011.6.3.3.3.1.12 | ColumnhwSubslotTypeName | read-only | current | daughter board type name in the subslot,refer to the HW-TC table. |
| 1.3.6.1.4.1.2011.6.3.3.3.1.13 | ColumnhwSubslotPrimaryStatus | read-only | current | The primary status of the daughter board. Options: 1. isNr(1) -in Service, normal 2. isAnr(2) -in service, abnormal 3. isRst(3) -in service, restricted 4. isAn… |
| 1.3.6.1.4.1.2011.6.3.3.3.1.14 | ColumnhwSubslotSecondaryStatus | read-only | current | The secondary status of the daughter board. This BITS structure can report the following status: 1. sstAins(0) -this bit position positively reports that the s… |
| 1.3.6.1.4.1.2011.6.3.3.3.1.15 | ColumnhwSubslotCLEICode | read-only | current | daughter board CLEI Code(COMMON LANGUAGE Location Identifier Code): Used to identify the location and the type of a telecommunication device. For the definitio… |
| 1.3.6.1.4.1.2011.6.3.3.3.1.16 | ColumnhwSubslotTemperature | read-only | current | The temperature of the daughter board. (Unit:centigrade) The value 0X7FFFFFFF indicates invalid temperature. |
| 1.3.6.1.4.1.2011.6.3.3.3.1.17 | ColumnhwSubslotCpuRate | read-only | current | The cpu occupancy of the daughter board. The value -1 indicates invalid cpu occupancy. |
| 1.3.6.1.4.1.2011.6.3.3.3.1.18 | ColumnhwSubslotRamUseRate | read-only | current | The memory occupancy of the daughter board. The value -1 indicates invalid memory occupancy. |
| 1.3.6.1.4.1.2011.6.3.3.4 | TablehwPortTable | not-accessible | current | Port configuration table that describes the detailed information of physical ports in the board, including the type, status and rate of the port. This table mu… |
| 1.3.6.1.4.1.2011.6.3.3.4.1 | RowhwPortEntry | not-accessible | current | Port configuration table that describes the detailed information of physical ports in the board, including the type, status and rate of the port. This table mu… |
| 1.3.6.1.4.1.2011.6.3.3.4.1.1 | ColumnhwPortIndex | read-only | current | Port index, indicating the physical number of the port on a board. |
| 1.3.6.1.4.1.2011.6.3.3.4.1.2 | ColumnhwPortType | read-only | current | Port type, which is defined in HUAWEI-TC-MIB.mib. |
| 1.3.6.1.4.1.2011.6.3.3.4.1.3 | ColumnhwPortDesc | read-write | current | The description about the port, used to describe extra information of the port. For example, you can describe the user that connects to the port. The standby c… |
| 1.3.6.1.4.1.2011.6.3.3.4.1.4 | ColumnhwPortSpeed | read-only | deprecated | The speed of the port. Unit:Kbps |
| 1.3.6.1.4.1.2011.6.3.3.4.1.5 | ColumnhwPortOperStatus | read-only | current | Port operation status. Options: 1.normal(1) -indicates that the link is up or activated 2.fault(2) -indicates that port failure 3.localLoopback(3) -indicates t… |
| 1.3.6.1.4.1.2011.6.3.3.4.1.6 | ColumnhwPortAdminStatus | read-write | current | Port administration status. Options: 1.active(1) -activate the port 2.deactive(2) -deactivate the port 3.block(3) -block the port 4.unblock(4) -unblock the por… |
| 1.3.6.1.4.1.2011.6.3.3.4.1.7 | ColumnhwPortNetworkRole | read-write | current | Indicates the network role of a board. Options: 1. uplink(1) -indicates the uplink port 2. cascade(2) -indicates the subtending port 3. access(3) -indicates th… |
| 1.3.6.1.4.1.2011.6.3.3.4.1.8 | ColumnhwPortTemprature | read-only | current | The temperature of the port. The object is not used. |
| 1.3.6.1.4.1.2011.6.3.3.4.1.9 | ColumnhwPortPrimaryStatus | read-only | current | The primary status of the port. Options: 1. isNr(1) -in Service, normal 2. isAnr(2) -in service, abnormal 3. isRst(3) -in service, restricted 4. isAnrst(4) -in… |
| 1.3.6.1.4.1.2011.6.3.3.4.1.10 | ColumnhwPortSecondaryStatus | read-only | current | The secondary status of the port. This BITS structure can report the following status: 1. sstAins(0) -this bit position positively reports that the status of t… |
| 1.3.6.1.4.1.2011.6.3.3.4.1.11 | ColumnhwPortVsIDMask | read-only | current | The virtual system mask of the port, each bit indicates the VAN to which the board belongs. For example, the first bit maps vs0, the second bit maps vs1, and t… |
| 1.3.6.1.4.1.2011.6.3.3.5 | NodehwFrameLinks | |||
| 1.3.6.1.4.1.2011.6.3.3.5.1 | ScalarhwFrameLinkNumber | read-write | current | Number of frame Links, which refers to the number of links between the main frame and the standby frame of the current device. If there are many frames, but th… |
| 1.3.6.1.4.1.2011.6.3.3.5.2 | TablehwFrameLinkTable | not-accessible | current | The index of this table is hwFrameLinkIndex. The frame link table. It describes the topology relation between the frames. For the device that can automatically… |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1 | RowhwFrameLinkEntry | not-accessible | current | The index of this entry is hwFrameLinkIndex. The frame link table. It describes the topology relation between the frames. For the device that can automatically… |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.1 | ColumnhwFrameLinkIndex | read-only | current | Index of the frame link. It is sequentially numerated and exclusively identified in the device. There is no restriction to the coding rule. |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.2 | ColumnhwFrameLinkLeftFrame | read-write | current | The ID of the left node linked to the frame, corresponding to the hwFrameIndex in the hwFrameTable |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.3 | ColumnhwFrameLinkLeftSlot | read-write | current | The ID of the left slot linked to the frame, corresponding to the hwSlotIndex in the hwSlotTable. It indicates which slot of the left node is the link entry. |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.4 | ColumnhwFrameLinkLeftSubSlot | read-write | current | Link the left subslot, corresponding to the hwSubSlotIndex in the hwSubTable. It indicates which subslot of the left node is the link entry. |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.5 | ColumnhwFrameLinkLeftPort | read-write | current | The ID of the left port linked to the frame, corresponding to the hwPortIndex in the hwPortTable. It indicates which port of the left node is the link entry. |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.6 | ColumnhwFrameLinkRightFrame | read-write | current | The ID of the right node linked to the frame, corresponding to the hwFrameIndex of the hwFrameTable. |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.7 | ColumnhwFrameLinkRightSlot | read-write | current | The ID of the right slot linked the frame, corresponding to the hwSlotIndex of the hwSlotTable. It indicates which slot of the right node is the link entry. |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.8 | ColumnhwFrameLinkRightSubSlot | read-write | current | Link the right subslot, corresponding to the hwSubSlotIndex in the hwSubSlotTable. It indicates which subslot of the right node is the link entry. |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.9 | ColumnhwFrameLinkRightPort | read-write | current | The ID of the right port linked to the frame, corresponding to the hwPortIndex in the hwPortTable. It indicates which port of the right port is the link entry. |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.10 | ColumnhwFrameLinkOperStatus | read-only | current | The running status of the link. Options: 1.normal(1) - the running status of the link is normal 2.fault(2) - the running status of the link is fault 3.discover… |
| 1.3.6.1.4.1.2011.6.3.3.5.2.1.11 | ColumnhwFrameLinkRowStatus | read-create | current | The row status of the frame link, used to add or delete a link. |
| 1.3.6.1.4.1.2011.6.3.3.5.3 | ScalarhwFrameLinkNextIndex | read-only | current | The frame link table indicates adding the index value to be assigned by the new link. This leaf is used to access an index ID of the next frame link dynamicall… |
| 1.3.6.1.4.1.2011.6.3.3.6 | NodehwNarrowBoard | |||
| 1.3.6.1.4.1.2011.6.3.3.6.1 | TablehwBoardAttrTable | not-accessible | current | Inquiring or modifying AULaw, impedance and current or ringvoltage of ASL, A32 and H511POTS ports. The indexes of this table are hwFrameIndex and hwSlotIndex. … |
| 1.3.6.1.4.1.2011.6.3.3.6.1.1 | RowhwBoardAttrEntry | not-accessible | current | Inquiring or modifying AULaw, impedance and current or ringvoltage of ASL, A32 and H511POTS ports. The indexes of this entry are hwFrameIndex and hwSlotIndex. … |
| 1.3.6.1.4.1.2011.6.3.3.6.1.1.1 | ColumnhwBoardAulaw | read-write | current | Coding method of voice signal when digitalizing. In different country or area it should be A law or u law. 1 2 |
| 1.3.6.1.4.1.2011.6.3.3.6.1.1.2 | ColumnhwBoardCurrent | read-write | current | Port current supported by the board. The value ranges from 1 to 10, which indicates the port current value supported under certain loopline impedance. 1 2 3 4 … |
| 1.3.6.1.4.1.2011.6.3.3.6.1.1.3 | ColumnhwBoardImpedance | read-write | current | Port impedance of the board. The following values indicates different impedance with different application circumstances. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 2… |
| 1.3.6.1.4.1.2011.6.3.3.6.1.1.4 | ColumnhwBoardEnvironment | read-write | current | The object is used to set and query the working environment of a board. Options: 1.emsan(1) -indicates that the device is on a terminal node or a convergence n… |
| 1.3.6.1.4.1.2011.6.3.3.6.1.1.5 | ColumnhwBoardWorkmode | read-write | current | The object is used to set the working mode of the COMBO board. Options: 1.combo(1) -the broadband and voice parts of the board are powered on 2.powerSaving(2) … |
| 1.3.6.1.4.1.2011.6.3.3.6.1.1.6 | ColumnhwBoardRingVoltage | read-write | current | It is supported to config ringvoltage on virtual A04 board. It should be 41.5v or 45v. 1 2 |
| 1.3.6.1.4.1.2011.6.3.3.6.1.1.7 | ColumnhwBoardWorkState | read-only | current | The object is used to query the working status of the COMBO board. Options: 1. combo(1) -if the broadband and voice parts of the board are powered on, the retu… |
| 1.3.6.1.4.1.2011.6.3.3.7 | TablehwVsPortTable | not-accessible | current | Port query table that describes the detailed information of physical ports in the board, including the type, the virtual system mask of the port. The indexes o… |
| 1.3.6.1.4.1.2011.6.3.3.7.1 | RowhwVsPortEntry | not-accessible | current | Port query table that describes the detailed information of physical ports in the board, including the type, the virtual system mask of the port. The indexes o… |
| 1.3.6.1.4.1.2011.6.3.3.7.1.1 | ColumnhwVsPortType | read-only | current | Port type, which is defined in HUAWEI-TC-MIB.mib. |
| 1.3.6.1.4.1.2011.6.3.3.7.1.2 | ColumnhwVsPortVsMask | read-only | current | The virtual system mask of the port, each bit indicates the VAN to which the port belongs. For example, the first bit maps vs0, the second bit maps vs1, and th… |
| 1.3.6.1.4.1.2011.6.3.4 | TablehwCpuDevTable | not-accessible | current | The indexes of this table are hwFrameIndex, hwSlotIndex and hwCpuDevIndex. A table of CPU statistics. |
| 1.3.6.1.4.1.2011.6.3.4.1 | RowhwCpuDevEntry | not-accessible | current | The indexes of this entry are hwFrameIndex, hwSlotIndex and hwCpuDevIndex. A table of CPU statistics. |
| 1.3.6.1.4.1.2011.6.3.4.1.1 | ColumnhwCpuDevIndex | not-accessible | current | Index of hwCpuDevTable. |
| 1.3.6.1.4.1.2011.6.3.4.1.2 | ColumnhwCpuDevDuty | read-only | current | The overall CPU duty percentage in the last 5-second period. |
| 1.3.6.1.4.1.2011.6.3.4.1.3 | ColumnhwAvgDuty1min | read-only | current | The overall CPU duty percentage in the last 1 minute period. |
| 1.3.6.1.4.1.2011.6.3.4.1.4 | ColumnhwAvgDuty5min | read-only | current | The overall CPU duty percentage in the last 5-minute period. |
| 1.3.6.1.4.1.2011.6.3.4.1.5 | ColumnhwCpuRunTime | read-only | current | Duration of CPU running(s). |
| 1.3.6.1.4.1.2011.6.3.4.1.6 | ColumnhwCpuOverLoadNum | read-only | current | Number of CPU overload. |
| 1.3.6.1.4.1.2011.6.3.4.1.7 | ColumnhwCpuOverLoadTime | read-only | current | Duration of CPU overload(s). |
| 1.3.6.1.4.1.2011.6.3.4.1.8 | ColumnhwCpuCongestionNum | read-only | current | Number of CPU congestion. |
| 1.3.6.1.4.1.2011.6.3.4.1.9 | ColumnhwCpuCongestionTime | read-only | current | Duration of CPU congestion(s). |
| 1.3.6.1.4.1.2011.6.3.5 | NodehwMemoryDev | |||
| 1.3.6.1.4.1.2011.6.3.5.1 | TablehwMemoryDevTable | not-accessible | current | The index of this table is hwFrameIndex, hwSlotIndex or hwMemoryDevModuleIndex. This table contains memory information. |
| 1.3.6.1.4.1.2011.6.3.5.1.1 | RowhwMemoryDevEntry | not-accessible | current | The index of this entry is hwFrameIndex, hwSlotIndex or hwMemoryDevModuleIndex. This table contains memory information. |
| 1.3.6.1.4.1.2011.6.3.5.1.1.1 | ColumnhwMemoryDevModuleIndex | not-accessible | current | Index of hwMemoryDevTable. |
| 1.3.6.1.4.1.2011.6.3.5.1.1.2 | ColumnhwMemoryDevSize | read-only | current | Indicates the total size of the memory module which is on the managed object. Its unit is byte. |
| 1.3.6.1.4.1.2011.6.3.5.1.1.3 | ColumnhwMemoryDevFree | read-only | current | Indicates the free size of the memory, in the unit of byte. |
| 1.3.6.1.4.1.2011.6.3.5.1.1.4 | ColumnhwMemoryDevRawSliceUsed | read-only | current | Indicates the used size of the raw slice memory, in the unit of byte. |
| 1.3.6.1.4.1.2011.6.3.5.1.1.5 | ColumnhwMemoryDevLargestFree | read-only | current | The maximum size of the memory that can be currently used, in the unit of byte. |
| 1.3.6.1.4.1.2011.6.3.5.1.1.6 | ColumnhwMemoryDevFail | read-only | current | Count of memory allocation failures. |
| 1.3.6.1.4.1.2011.6.3.5.1.1.7 | ColumnhwMemoryDevFailNoMem | read-only | current | Count of the memory allocation |
| 1.3.6.1.4.1.2011.6.3.5.1.1.8 | ColumnhwMemoryDevSize64 | read-only | current | Indicates the total size of the memory module incase of excessing 4G which is on the managed object.Its unit is byte. |
| 1.3.6.1.4.1.2011.6.3.5.1.1.9 | ColumnhwMemoryDevFree64 | read-only | current | Indicates the free size of the memory incase of excessing 4G, in the unit of byte. |
| 1.3.6.1.4.1.2011.6.3.5.2 | TablehwBufferTable | not-accessible | current | The index of this table is hwFrameIndex, hwSlotIndex, hwBufferModuleIndex or hwBufferSize. Buffer information table. |
| 1.3.6.1.4.1.2011.6.3.5.2.1 | RowhwBufferEntry | not-accessible | current | The index of this entry is hwFrameIndex, hwSlotIndex, hwBufferModuleIndex or hwBufferSize. Buffer information table. |
| 1.3.6.1.4.1.2011.6.3.5.2.1.1 | ColumnhwBufferModuleIndex | not-accessible | current | Index of hwBufferTable. |
| 1.3.6.1.4.1.2011.6.3.5.2.1.2 | ColumnhwBufferSize | not-accessible | current | Contains the size of byte hwBuffers, in the unit of byte. |
| 1.3.6.1.4.1.2011.6.3.5.2.1.3 | ColumnhwBufferCurrentTotal | read-only | current | Contains the total number of hwBuffers currently. |
| 1.3.6.1.4.1.2011.6.3.5.2.1.4 | ColumnhwBufferCurrentUsed | read-only | current | Contains the number of used hwBuffers currently. |
| 1.3.6.1.4.1.2011.6.3.6 | NodehwFlashDev | |||
| 1.3.6.1.4.1.2011.6.3.6.1 | TablehwFlashDevTable | not-accessible | current | The index of this table is hwFrameIndex, hwSlotIndex or hwFlashDevIndex. This table contains flash information. |
| 1.3.6.1.4.1.2011.6.3.6.1.1 | RowhwFlashDevEntry | not-accessible | current | The index of this entry is hwFrameIndex, hwSlotIndex or hwFlashDevIndex. This table contains flash information. |
| 1.3.6.1.4.1.2011.6.3.6.1.1.1 | ColumnhwFlashDevIndex | not-accessible | current | Index of hwFlashDevTable. |
| 1.3.6.1.4.1.2011.6.3.6.1.1.2 | ColumnhwFlashDevSize | read-only | current | Total size in Octets of Flash memory, |
| 1.3.6.1.4.1.2011.6.3.6.1.1.3 | ColumnhwFlashDevFree | read-only | current | Unused Size in Octets of Flash memory. |
| 1.3.6.1.4.1.2011.6.3.6.1.1.4 | ColumnhwFlashDevEraseTime | read-only | current | The last time when Flash was erased after powerup. DEFVAL { 0 } |
| 1.3.6.1.4.1.2011.6.3.6.1.1.5 | ColumnhwFlashDevEraseStatus | read-only | current | Status of current or last flash erasing. Options: 1.flashErasing(1) - flash is executing erasing operation 2.flashErasedSuccessful(2) - flash erased successful… |
| 1.3.6.1.4.1.2011.6.3.6.1.1.6 | ColumnhwFlashDevStatus | read-only | current | Status of the availability of flash. Options: 1.busy(1) - flash state is busy 2.available(2) - flash state is available |
| 1.3.6.1.4.1.2011.6.3.7 | NodehwAlarmInfo | |||
| 1.3.6.1.4.1.2011.6.3.7.1 | TablehwAlarmTable | not-accessible | obsolete | The index of this table is hwAlarmSerialIndex. This table is no longer used. |
| 1.3.6.1.4.1.2011.6.3.7.1.1 | RowhwAlarmEntry | not-accessible | obsolete | The index of this entry is hwAlarmSerialIndex. This table is no longer used. |
| 1.3.6.1.4.1.2011.6.3.7.1.1.1 | ColumnhwAlarmSerialIndex | read-only | obsolete | This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.7.1.1.2 | ColumnhwObsoleteAlarmType | read-only | obsolete | The type of the Alarm. |
| 1.3.6.1.4.1.2011.6.3.7.1.1.3 | ColumnhwAlarmOcurTime | read-only | obsolete | This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.7.1.1.4 | ColumntrapObjectIdValue | read-only | obsolete | This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.8 | NodehwDevTraps | |||
| 1.3.6.1.4.1.2011.6.3.8.1 | NodehwDevTrapVbOids | |||
| 1.3.6.1.4.1.2011.6.3.8.1.1 | ScalarhwTrapHardFaultPara1 | accessible-for-notify | current | The first para of board hard fault. |
| 1.3.6.1.4.1.2011.6.3.8.1.2 | ScalarhwTrapHardFaultPara2 | accessible-for-notify | current | The second para of board hard fault. |
| 1.3.6.1.4.1.2011.6.3.8.1.3 | ScalarhwTrapSystemRebootCause | accessible-for-notify | current | The cause of system reboot. |
| 1.3.6.1.4.1.2011.6.3.8.1.4 | ScalarhwTrapHardFaultLocation | accessible-for-notify | current | The location of board hard fault. |
| 1.3.6.1.4.1.2011.6.3.8.1.5 | ScalarhwConfigChangeIP | accessible-for-notify | current | The serial IP of configuration changes. If the configuration changes is trigger by the command line users, the IP address is 0.0.0.0. If it is triggered by the… |
| 1.3.6.1.4.1.2011.6.3.8.1.6 | ScalarhwDevUserLabelType | accessible-for-notify | current | User label type. 1. Frame type. 2. Slot type. 3. Port type. |
| 1.3.6.1.4.1.2011.6.3.8.1.7 | ScalarhwDevUserLabel | accessible-for-notify | current | User label. |
| 1.3.6.1.4.1.2011.6.3.8.1.8 | ScalarhwDevVPI | accessible-for-notify | current | This node is reserved and has no actual meaning. |
| 1.3.6.1.4.1.2011.6.3.8.1.9 | ScalarhwDevVCI | accessible-for-notify | current | This node is reserved and has no actual meaning. |
| 1.3.6.1.4.1.2011.6.3.8.1.10 | ScalarhwDevVlanId | accessible-for-notify | current | This node is reserved and has no actual meaning. |
| 1.3.6.1.4.1.2011.6.3.8.1.11 | ScalarhwFrameTypeConfigured | accessible-for-notify | current | Type of the frame that is configured in database of device. |
| 1.3.6.1.4.1.2011.6.3.8.1.12 | ScalarhwActualSlotTypeName | accessible-for-notify | current | Type and name of the inserted board. |
| 1.3.6.1.4.1.2011.6.3.8.1.13 | ScalarhwOldDeviceIpAddr | accessible-for-notify | current | Old IP address of the device. |
| 1.3.6.1.4.1.2011.6.3.8.1.14 | ScalarhwNewDeviceIpAddr | accessible-for-notify | current | New IP address of the device. |
| 1.3.6.1.4.1.2011.6.3.8.1.15 | ScalarhwOldSubslotType0 | accessible-for-notify | current | Type of the first daughter board that is used previously. |
| 1.3.6.1.4.1.2011.6.3.8.1.16 | ScalarhwOldSubslotType1 | accessible-for-notify | current | Type of the second daughter board that is used previously. |
| 1.3.6.1.4.1.2011.6.3.8.1.17 | ScalarhwOldSubslotType2 | accessible-for-notify | current | Type of the third daughter board that is used previously. |
| 1.3.6.1.4.1.2011.6.3.8.1.18 | ScalarhwOldSubslotType3 | accessible-for-notify | current | Type of the fourth daughter board that is used previously. |
| 1.3.6.1.4.1.2011.6.3.8.1.19 | ScalarhwDevStandbyMainSlotTypeName | accessible-for-notify | current | Slot information description, to describe standby main board name information of the slot. |
| 1.3.6.1.4.1.2011.6.3.8.1.20 | TablehwDevConfPreviousTable | not-accessible | current | Previous Device querying table. It is used to query barcode and name of previous device which was replaced by a new one. The indexes of this table are hwFrameI… |
| 1.3.6.1.4.1.2011.6.3.8.1.20.1 | RowhwDevConfPreviousEntry | not-accessible | current | Previous Device querying table. It is used to query barcode and name of previous device which was replaced by a new one. The indexes of this entry are hwFrameI… |
| 1.3.6.1.4.1.2011.6.3.8.1.20.1.1 | ColumnhwDevPreSlotTypeName | accessible-for-notify | current | Slot information description, to describe previous board name information of the slot. The indexes of the entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.3.8.1.20.1.2 | ColumnhwDevPreSlotPhySerialNum | accessible-for-notify | current | The vendor-specific serial number string for the previous board of the slot. The preferred value is the serial number string actually printed on the component … |
| 1.3.6.1.4.1.2011.6.3.8.1.21 | TablehwSystemResParaTable | not-accessible | current | The index of this table is hwResTypePara. System resource table. |
| 1.3.6.1.4.1.2011.6.3.8.1.21.1 | RowhwSystemResParaEntry | not-accessible | current | The index of this entry is hwResTypePara. System resource table. |
| 1.3.6.1.4.1.2011.6.3.8.1.21.1.1 | ColumnhwResTypePara | accessible-for-notify | current | System resource type. Options: 1. memory(1) -indicates the memory resource 2. messageUnits(2)-indicates the message resource 3. cpu(3) -indicates the CPU resou… |
| 1.3.6.1.4.1.2011.6.3.8.1.21.1.2 | ColumnhwResOccupancyPara | accessible-for-notify | current | System resource occupancy. |
| 1.3.6.1.4.1.2011.6.3.8.1.22 | ScalarhwTrapStorageName | accessible-for-notify | current | The first para of storage fault, which describe the storage name. |
| 1.3.6.1.4.1.2011.6.3.8.1.23 | ScalarhwExtendBoardFrameIndex | accessible-for-notify | current | The frame index of the port connecting the main frame to the extended frame. |
| 1.3.6.1.4.1.2011.6.3.8.1.24 | ScalarhwExtendedFrameUplinkPort | accessible-for-notify | current | Another uplink port of extended frame. |
| 1.3.6.1.4.1.2011.6.3.8.1.25 | ScalarhwExtendBoardSlotIndex | accessible-for-notify | current | The slot index of the port connecting the main frame to the extended frame. |
| 1.3.6.1.4.1.2011.6.3.8.1.26 | ScalarhwExtendBoardPortIndex | accessible-for-notify | current | The port index of the port connecting the main frame to the extended frame. |
| 1.3.6.1.4.1.2011.6.3.8.1.27 | ScalarhwTrapHardFaultName | accessible-for-notify | current | The name of board hard fault. |
| 1.3.6.1.4.1.2011.6.3.8.1.28 | ScalarhwTrapHardFaultEffect | accessible-for-notify | current | The effect of board hard fault. |
| 1.3.6.1.4.1.2011.6.3.8.1.29 | ScalarhwSlotInputIdIndex | accessible-for-notify | current | Input Circuit Index. |
| 1.3.6.1.4.1.2011.6.3.8.1.30 | ScalarhwSlotInputType | accessible-for-notify | current | Voltage Input Type. Options: 1. localac(1) -local ac type. 2. localdc(2) -local dc type. 3. remoteac(3) -remote ac type. 4. remotedc(4) -remote dc type. 5. pd(… |
| 1.3.6.1.4.1.2011.6.3.8.1.31 | ScalarhwDevAutoDeployPhase | accessible-for-notify | current | Auto-deployment phase: 1. Download the auto-deployment policy file 2. Parse the auto-deployment policy file 3. Download the upgrade software 4. Download the co… |
| 1.3.6.1.4.1.2011.6.3.8.1.32 | ScalarhwVccLocalChassisId | accessible-for-notify | current | The index of local chassis. |
| 1.3.6.1.4.1.2011.6.3.8.1.33 | ScalarhwVccNeighbourChassisId | accessible-for-notify | current | The index of neighbour chassis. |
| 1.3.6.1.4.1.2011.6.3.8.1.34 | ScalarhwVccGroupId | accessible-for-notify | current | The index of data channel. |
| 1.3.6.1.4.1.2011.6.3.8.1.35 | ScalarhwVccLinkIfPhysicIndex | accessible-for-notify | current | The index of interface for the data link. |
| 1.3.6.1.4.1.2011.6.3.8.1.36 | ScalarhwVccLinkIfPhysicName | accessible-for-notify | current | The name of interface for the data link. |
| 1.3.6.1.4.1.2011.6.3.8.1.37 | ScalarhwTrapPowerPortIndex | accessible-for-notify | current | The index of power port. |
| 1.3.6.1.4.1.2011.6.3.8.1.38 | ScalarhwDevTempMinorAlmThreshold | accessible-for-notify | current | The level-1 high temperature alarm threshold. |
| 1.3.6.1.4.1.2011.6.3.8.1.39 | ScalarhwDevTempMajorAlmThreshold | accessible-for-notify | current | The level-2 high temperature alarm threshold. |
| 1.3.6.1.4.1.2011.6.3.8.1.40 | ScalarhwDevTempCriticalAlmThreshold | accessible-for-notify | current | The level-3 high temperature alarm threshold. |
| 1.3.6.1.4.1.2011.6.3.8.1.41 | ScalarhwDeviceCurrentTemp | accessible-for-notify | current | The current temperature of the device. |
| 1.3.6.1.4.1.2011.6.3.8.1.42 | ScalarhwDevSnmpHostIpAddress | accessible-for-notify | current | The IP address of SNMP probe abnormal record. |
| 1.3.6.1.4.1.2011.6.3.8.1.43 | ScalarhwDevSnmpLastReceivedTime | accessible-for-notify | current | The last probe time of SNMP probe abnormal record. |
| 1.3.6.1.4.1.2011.6.3.8.1.44 | ScalarhwDevSnmpAverageInterval | accessible-for-notify | current | The average interval of SNMP probe abnormal record. |
| 1.3.6.1.4.1.2011.6.3.8.1.45 | ScalarhwDevSnmpMinimumInterval | accessible-for-notify | current | The minimum interval of SNMP probe abnormal record. |
| 1.3.6.1.4.1.2011.6.3.8.1.46 | ScalarhwDevSnmpMaxmumInterval | accessible-for-notify | current | The maxmum interval of SNMP probe abnormal record. |
| 1.3.6.1.4.1.2011.6.3.8.1.47 | ScalarhwDevSnmpReceivedCount | accessible-for-notify | current | The connection count of SNMP probe abnormal record. |
| 1.3.6.1.4.1.2011.6.3.8.1.48 | ScalarhwSubboardID | accessible-for-notify | current | The index ID of sub board. |
| 1.3.6.1.4.1.2011.6.3.8.2 | NodehwDevCommonTraps | |||
| 1.3.6.1.4.1.2011.6.3.8.2.0 | NodehwDevCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.3.8.2.0.1 | NotificationhwDevBoardDetectTrap | current | This trap message is reported when a board is detected. | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.2 | NotificationhwDevBoardDisappearedTrap | current | This trap message is reported when a board disappears. | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.3 | NotificationhwDevBoardStateChangedTrap | current | This trap message is reported when a board's state changes. | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.4 | NotificationhwDevBoardStaChgOffLineTrap | current | This trap message is reported when a board's state changes from online to offline. | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.5 | NotificationhwDevBoardAutoLoadTrap | current | This trap message is reported when a board starts to autoload. | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.6 | NotificationhwDevUserlabelChangeTrap | current | This trap message is reported when a board's userlabel changes. The binding parameters hwDevVPI, hwDevVCI and hwDevVlanId are reserved and have no actual meani… | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.7 | NotificationhwDevSystemStateChangeTrap | current | This trap message is reported when the system state changes. | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.8 | NotificationhwDevFrameDetectTrap | current | This trap message is reported when a frame is detected. | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.9 | NotificationhwDevFrameDisappearedTrap | current | This trap message is reported when a frame disappears. | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.10 | NotificationhwDevFrameStateChangeTrap | current | This trap message is reported when a frame's state changes. | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.11 | NotificationhwDevExtendedFramePortChangeTrap | current | This trap message is reported when a extended frame's uplink port changes. | |
| 1.3.6.1.4.1.2011.6.3.8.2.0.12 | NotificationhwDevSnmpProbeRecordTrap | current | This trap message is reported when the abnormal record of SNMP probe monitor occurs. | |
| 1.3.6.1.4.1.2011.6.3.8.3 | NodehwDevAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.3.8.3.1 | NodehwDevSystemTraps | |||
| 1.3.6.1.4.1.2011.6.3.8.3.1.0 | NodehwDevSystemTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.3.8.3.1.0.1 | NotificationhwDevSystemStartupTrap | current | This trap message is reported when the system prompts the normal system startup after the initialization completes. | |
| 1.3.6.1.4.1.2011.6.3.8.3.1.0.2 | NotificationhwDevSystemDataSynCancelTrap | current | This trap message is reported when the data synchronization between the active and standby control boards is canceled. The first hwSlotIndex indicates active m… | |
| 1.3.6.1.4.1.2011.6.3.8.3.1.0.3 | NotificationhwDevActiveStandbyContolBoardInconsistentTrap | current | This trap message is reported when the active control board type is inconsistent with standby ctrol board type. | |
| 1.3.6.1.4.1.2011.6.3.8.3.1.0.4 | NotificationhwDevSystemResetTrap | current | This trap message is reported when the system is reset. | |
| 1.3.6.1.4.1.2011.6.3.8.3.1.0.5 | NotificationhwDevActiveStandbyDataSynCancelTrap | current | This trap message is reported when the data synchronization between the active and standby control boards is canceled. The first hwSlotIndex indicates active m… | |
| 1.3.6.1.4.1.2011.6.3.8.3.1.0.6 | NotificationhwDevActiveStandbyDataSynCancelRecoverTrap | current | This trap message is reported when the data synchronization between the active and standby control boards recovers. The first hwSlotIndex indicates active main… | |
| 1.3.6.1.4.1.2011.6.3.8.3.1.0.7 | NotificationhwDevSystemPoweroffTrap | current | This trap message is reported when the device is cut off. | |
| 1.3.6.1.4.1.2011.6.3.8.3.1.0.8 | NotificationhwDevSystemAutoDeployFailTrap | current | This trap message is reported when the auto-deployment fails. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2 | NodehwDevFrameTraps | |||
| 1.3.6.1.4.1.2011.6.3.8.3.2.0 | NodehwDevFrameTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.1 | NotificationhwDevFrameTypeInconsistentTrap | current | This trap message is reported when the actual shelf type is inconsistent with the configuration in the database of device. In this case, the configuration data… | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.2 | NotificationhwDevFrameRestoreTrap | current | This trap message is reported when the communication of the frame restored. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.3 | NotificationhwDevFrameFaultTrap | current | This trap message is reported when the communication of the frame interrupted, the services in the frame fail. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.4 | NotificationhwDevExtendedFrameTypeInconsistentTrap | current | This trap message is reported when the actual shelf type is inconsistent with the configuration in the database of device. In this case, the configuration data… | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.5 | NotificationhwDevExtendedFrameDyingGaspAlarmTrap | current | This trap message is reported when the dying-gasp of the extended frame occurs. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.6 | NotificationhwDevExtendedFrameDyingGaspRestoreTrap | current | This trap message is reported when the dying-gasp of the extended frame recovers. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.7 | NotificationhwDevFrameIdOverLoadTrap | current | This trap message is reported when the frame ID exceeded the maximal number. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.8 | NotificationhwDevFrameCmtsAntitheftAuthFailTrap | current | This trap message is reported when the anti-theft authentication of the extended frame fails. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.9 | NotificationhwDevFrameCmtsAntitheftAuthRestoreTrap | current | This trap message is reported when the anti-theft authentication of the extended frame succeeds. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.10 | NotificationhwVccDataLinkFault | current | This trap message is reported when the data link changes to down. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.11 | NotificationhwVccDataLinkFaultResume | current | This trap message is reported when the data link changes to up. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.12 | NotificationhwVccDataChannelFault | current | This trap message is reported when the data channel changes to down. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.13 | NotificationhwVccDataChannelFaultResume | current | This trap message is reported when the data channel changes to up. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.14 | NotificationhwDeviceHighTemperatureMinorFaultTrap | current | This trap message is reported when the device temperature exceeds the level-1 high temperature alarm threshold. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.15 | NotificationhwDeviceHighTemperatureMinorRestoreTrap | current | This trap message is reported when the device temperature exceeds the threshold for level-1 high temperature alarm recovery. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.16 | NotificationhwDeviceHighTemperatureMajorFaultTrap | current | This trap message is reported when the device temperature exceeds the level-2 high temperature alarm threshold. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.17 | NotificationhwDeviceHighTemperatureMajorRestoreTrap | current | This trap message is reported when the device temperature exceeds the threshold for level-2 high temperature alarm recovery. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.18 | NotificationhwDeviceHighTemperatureCriticalFaultTrap | current | This trap message is reported when the device temperature exceeds the level-3 high temperature alarm threshold. | |
| 1.3.6.1.4.1.2011.6.3.8.3.2.0.19 | NotificationhwDeviceHighTemperatureCriticalRestoreTrap | current | This trap message is reported when the device temperature exceeds the threshold for level-3 high temperature alarm recovery. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3 | NodehwDevBoardTraps | |||
| 1.3.6.1.4.1.2011.6.3.8.3.3.0 | NodehwDevBoardTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.1 | NotificationhwDevBoardMisMatchTrap | current | This trap message is reported when the type of the board that the user configured is inconsistent with the type of the board that is actually inserted. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.2 | NotificationhwDevBoardHardFaultTrap | current | This trap message is reported when an exception occurs in the corresponding hardware, may result in failure to provision the corresponding service. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.3 | NotificationhwDevBoardFaultTrap | current | This trap message is reported when the communication of the board interrupted, the services in the board fail. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.4 | NotificationhwDevBoardRestoreTrap | current | This trap message is reported when the communication of the board restored. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.5 | NotificationhwDevBoardReplacedTrap | current | This trap message is reported when the board is successfully replaced by another board of the same type. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.6 | NotificationhwDevBoardEnterTemperatureProctectModeTrap | current | This trap message is reported when the temperature of active control board is too high, all the LAN switch ports of the service board will be powered off excep… | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.7 | NotificationhwDevBoardExitTemperatureProctectModeTrap | current | This trap message is reported when the temperature of active control board recovers to safe region from high temperature risk region, all the LAN switch ports … | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.8 | NotificationhwDevBoardTemperatureTooHighTrap | current | This trap message is reported when the current temperature of service board exceed the high temperature threshold. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.9 | NotificationhwDevBoardTemperatureTooHighRecoverTrap | current | This trap message is reported when the current temperature of service board recovers to the normal range from high temperature. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.10 | NotificationhwDevBoardTemperatureTooLowTrap | current | This trap message is reported when the current temperature of service board is exceed the low temperature threshold. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.11 | NotificationhwDevBoardTemperatureTooLowRecoverTrap | current | This trap message is reported when the current temperature of service board recovers to normal range from low temperature. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.12 | NotificationhwDevPowerInputFaultTrap | current | This trap message is reported when the power input of the local shelf fails. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.13 | NotificationhwDevPowerInputRecoverTrap | current | This trap message is reported when the power input of the local shelf Recovers. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.14 | NotificationhwDevBoardOnlineStateTrap | current | This trap message is reported when the state of the board is online. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.15 | NotificationhwDevBoardHardRestoreTrap | current | This trap message is reported when the board hardware abnormity recovers. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.16 | NotificationhwDevBoardPower5VFaultTrap | current | This trap message is reported when the inner power of the board is abnormal. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.17 | NotificationhwDevBoardPower5VResumeTrap | current | This trap message is reported when the inner power of the board resumes. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.18 | NotificationhwDevStorageFaultTrap | current | This trap message is reported when the certain storage is hardware fault or software fault. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.19 | NotificationhwDevBoardFpgaFailTrap | current | This trap message is reported when the software fault occurs in board FPGA. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.20 | NotificationhwDevBoardFpgaRestoreTrap | current | This trap message is reported when the software fault in board FPGA recovers. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.21 | NotificationhwDevStorageFaultRestoreTrap | current | This trap message is reported when the certain storage is hardware fault or software fault recovers. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.22 | NotificationhwFtpConfigureTrap | current | This trap message is reported when the board need automatic expand. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.23 | NotificationhwDevBoardAutomaticExpandFailTrap | current | This trap message is reported when the board automatic expand fail. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.24 | NotificationhwDevBoardAutomaticExpandRestoreTrap | current | This trap message is reported when the board automatic expand fail recovers. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.25 | NotificationhwDevAuxiliaryHardwareFaultTrap | current | This trap message is reported when an exception occurs in the corresponding hardware, no need to deal with it . | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.26 | NotificationhwDevBoardInputFaultTrap | current | This trap message is reported when the input voltage of a line cannot be detected. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.27 | NotificationhwDevBoardInputRecoverTrap | current | This trap message is reported when detected power unit singals recover. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.28 | NotificationhwDevPowerLackVoltageFaultTrap | current | This trap message is reported when remote power supply input is under-voltage. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.29 | NotificationhwDevPowerLackVolitageRecoverTrap | current | This trap message is reported when voltage in the subrack recovers. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.30 | NotificationhwDevBoardReplaceFailTrap | current | This trap message is reported when the original board failed to replace with a new board. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.31 | NotificationhwDevPowerPortInputFaultTrap | current | This trap message is reported when the power input of the local shelf fails. | |
| 1.3.6.1.4.1.2011.6.3.8.3.3.0.32 | NotificationhwDevPowerPortInputRecoverTrap | current | This trap message is reported when the power input of the local shelf Recovers. | |
| 1.3.6.1.4.1.2011.6.3.8.3.4 | NodehwDevSubBoardTraps | |||
| 1.3.6.1.4.1.2011.6.3.8.3.4.0 | NodehwDevSubBoardTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.3.8.3.4.0.1 | NotificationhwDevSubBoardTypeInconsistentTrap | current | This trap message is reported when the configured daughter board type or quantity is not the same as the actual type or quantity. | |
| 1.3.6.1.4.1.2011.6.3.8.3.4.0.2 | NotificationhwDevSubBoardMisMatchTrap | current | This trap message is reported when the combination of daughter board type in main control board is not supported. | |
| 1.3.6.1.4.1.2011.6.3.8.3.4.0.3 | NotificationhwDevSubBoardReplacedTrap | current | This trap message is reported when the board is successfully replaced by another board of the same type. | |
| 1.3.6.1.4.1.2011.6.3.8.3.4.0.4 | NotificationhwDevSubBoardTemperatureTooHighTrap | current | This trap message is reported when the current temperature of service sub board exceed the high temperature threshold. | |
| 1.3.6.1.4.1.2011.6.3.8.3.4.0.5 | NotificationhwDevSubBoardTemperatureTooHighRecoverTrap | current | This trap message is reported when the current temperature of service sub board recovers to the normal range from high temperature. | |
| 1.3.6.1.4.1.2011.6.3.8.3.4.0.6 | NotificationhwDevSubBoardFaultTrap | current | This trap message is reported when the communication of the board interrupted. | |
| 1.3.6.1.4.1.2011.6.3.8.3.4.0.7 | NotificationhwDevSubBoardFaultRecoverTrap | current | This trap message is reported when the communication of the board restored. | |
| 1.3.6.1.4.1.2011.6.3.8.3.5 | NodehwDevDiagTraps | |||
| 1.3.6.1.4.1.2011.6.3.8.3.5.0 | NodehwDevDiagTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.3.8.3.5.0.1 | NotificationhwDiagResOverloadFaultTrap | current | This trap message is reported when the system resources usage exceeds the threshold The system resources include system CPU, system memory, and system messages. | |
| 1.3.6.1.4.1.2011.6.3.8.3.5.0.2 | NotificationhwDiagResOverloadRestoreTrap | current | This trap message is reported when the system resources usage recovers from the overload state to the normal state. | |
| 1.3.6.1.4.1.2011.6.3.8.5 | NodehwDevGeneralTrapsPre | |||
| 1.3.6.1.4.1.2011.6.3.8.5.0 | NodehwDevGeneralTraps | |||
| 1.3.6.1.4.1.2011.6.3.9 | NodehwAppBoardPara | |||
| 1.3.6.1.4.1.2011.6.3.9.1 | NodehwAppBoardGlobalPara | |||
| 1.3.6.1.4.1.2011.6.3.9.1.1 | ScalarhwAppBoardPhySlot | read-only | current | The location of Application board. |
| 1.3.6.1.4.1.2011.6.3.9.2 | TablehwAppBoardMngtTable | not-accessible | current | The index of this table is hwFrameIndex or hwSlotIndex. This is the App Application IP configuration table. This table is used to configure and query the IP co… |
| 1.3.6.1.4.1.2011.6.3.9.2.1 | RowhwAppBoardMngtEntry | not-accessible | current | The index of this entry is hwFrameIndex or hwSlotIndex. This is the App Application IP configuration table. This table is used to configure and query the IP co… |
| 1.3.6.1.4.1.2011.6.3.9.2.1.1 | ColumnhwAppBoardMngtVlan | read-write | current | The management VLAN of Application board. Range: 1-4093 |
| 1.3.6.1.4.1.2011.6.3.9.2.1.2 | ColumnhwAppBoardMngtIpType | read-write | current | The type of Ip address. IPV4:1 IPV6:2 |
| 1.3.6.1.4.1.2011.6.3.9.2.1.3 | ColumnhwAppBoardMngtIp | read-write | current | The IP address of the Application board |
| 1.3.6.1.4.1.2011.6.3.9.2.1.4 | ColumnhwAppBoardMngtMaskLength | read-write | current | The mask length of the ip address. Range: 0-128 |
| 1.3.6.1.4.1.2011.6.3.9.2.1.5 | ColumnhwAppBoardMngtGateway | read-write | current | The gateway of the Application board |
| 1.3.6.1.4.1.2011.6.3.9.2.1.6 | ColumnhwAppBoardMngtRowStatus | read-create | current | RowStatus standard operation. |
| 1.3.6.1.4.1.2011.6.3.11 | NodehwDevCompatibleTable | |||
| 1.3.6.1.4.1.2011.6.3.11.1 | ScalarhwCompatibleSysOid | read-only | current | The compatible SYSOID of new network element. |
| 1.3.6.1.4.1.2011.6.3.11.2 | ScalarhwCompatibleVersion | read-only | current | The compatible version of new network element. |
| 1.3.6.1.4.1.2011.6.3.11.3 | ScalarhwCompatibleVRCB | read-only | current | The compatible VRCB of new network element. |
| 1.3.6.1.4.1.2011.6.3.11.4 | ScalarhwCompatibleProductName | read-only | current | The compatible product name of new network element. |
| 1.3.6.1.4.1.2011.6.3.13 | NodehwSysRegister | |||
| 1.3.6.1.4.1.2011.6.3.13.1 | ScalarhwSysHandshakeEnable | read-write | current | The switch of periodic handshake between the device and the NMS. The NMS uses the periodic handshake process to check whether the device is properly connected.… |
| 1.3.6.1.4.1.2011.6.3.13.2 | ScalarhwSysHandshakeInterval | read-write | current | The interval for sending a handshake packet, in unit of minute Note: If the interval for sending a handshake packet is too long, the NMS cannot detect the disc… |
| 1.3.6.1.4.1.2011.6.3.13.3 | ScalarhwSysRegisterResponseStatus | read-write | current | The NMS response to the periodic handshake packet from the device. Options: 1.nooperation(-1) -default state of the system 2.registering(1) -register is in pro… |
| 1.3.6.1.4.1.2011.6.3.15 | NodehwCustomizedParameter | |||
| 1.3.6.1.4.1.2011.6.3.15.1 | TablehwCustomizedParameterTable | not-accessible | current | The index of this table is hwParaName. Customized parameter table. This table is no longer used. |
| 1.3.6.1.4.1.2011.6.3.15.1.1 | RowhwCustomizedParameterEntry | not-accessible | current | The index of this entry is hwParaName. Customized parameter table. This table is no longer used. |
| 1.3.6.1.4.1.2011.6.3.15.1.1.1 | ColumnhwParaName | not-accessible | current | The name of the parameter. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.15.1.1.2 | ColumnhwParaValue | read-create | current | The value of the parameter. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.15.1.1.3 | ColumnhwParaState | read-create | current | The overwritten state of the parameter. This object is no longer used. Options: 1.readWrite(1) - read and write 2.readOnly(2) - read only |
| 1.3.6.1.4.1.2011.6.3.15.1.1.4 | ColumnhwParaRowStatus | read-create | current | RowStatus standard operation. This object is no longer used. |
| 1.3.6.1.4.1.2011.6.3.16 | NodehwAutoReset | |||
| 1.3.6.1.4.1.2011.6.3.16.1 | TablehwPingAutoResetTable | not-accessible | current | The index of this table is hwHostIpAddr. Ping auto-reset table. |
| 1.3.6.1.4.1.2011.6.3.16.1.1 | RowhwPingAutoResetEntry | not-accessible | current | The index of this entry is hwHostIpAddr. Ping auto-reset table. |
| 1.3.6.1.4.1.2011.6.3.16.1.1.1 | ColumnhwHostIpAddr | read-only | current | The IP address of monitoring gateway |
| 1.3.6.1.4.1.2011.6.3.16.1.1.2 | ColumnhwPacketNumber | read-write | current | The number of the PING packets sent during every check, Default value: 5 |
| 1.3.6.1.4.1.2011.6.3.16.1.1.3 | ColumnhwIntervalTime | read-write | current | The interval of sending PING packets. Default: 1 Unit: second |
| 1.3.6.1.4.1.2011.6.3.16.1.1.4 | ColumnhwResponseTime | read-write | current | Time-out time for the response of the PING packets. Unit: second Default: 2 |
| 1.3.6.1.4.1.2011.6.3.16.1.1.5 | ColumnhwLoopTime | read-write | current | Interval between the cyclic checks Default value: 600 Unit: second |
| 1.3.6.1.4.1.2011.6.3.16.1.1.6 | ColumnhwFailureThreshold | read-write | current | The threshold of checking failed. Default value: 10 |
| 1.3.6.1.4.1.2011.6.3.16.1.1.7 | ColumnhwFailedTimes | read-only | current | Times of checking failed |
| 1.3.6.1.4.1.2011.6.3.16.1.1.8 | ColumnhwAutoResetEnableStatus | read-write | current | Enable status of auto-reset. Options: 1. enable(1) - enable 2. disable(2) - disable |
| 1.3.6.1.4.1.2011.6.3.16.1.1.9 | ColumnhwAutoResetRowStatus | read-create | current | RowStatus standard operation |
| 1.3.6.1.4.1.2011.6.3.17 | NodehwSystemResource | |||
| 1.3.6.1.4.1.2011.6.3.17.1 | TablehwSystemResTable | not-accessible | current | The index of this table is hwFrameIndex, hwSlotIndex or hwResType. System resource table. |
| 1.3.6.1.4.1.2011.6.3.17.1.1 | RowhwSystemResEntry | not-accessible | current | The index of this entry is hwFrameIndex, hwSlotIndex or hwResType. System resource table. |
| 1.3.6.1.4.1.2011.6.3.17.1.1.1 | ColumnhwResType | read-only | current | System resource type. Options: 1. memory(1) -indicates the memory resource 2. messageUnits(2)-indicates the message resource 3. cpu(3) -indicates the CPU resou… |
| 1.3.6.1.4.1.2011.6.3.17.1.1.2 | ColumnhwResOverLoad | read-write | current | System resource overload threshold. The following two system resources support querying and Threshold setting: memory(1), cpu(3). Memory(1) and cpu(3) have lim… |
| 1.3.6.1.4.1.2011.6.3.17.1.1.3 | ColumnhwResOccupancy | read-only | current | System resource occupancy. |
| 1.3.6.1.4.1.2011.6.3.17.2 | ScalarhwMemOccupancy | read-only | current | System memory occupancy. |
| 1.3.6.1.4.1.2011.6.3.17.3 | ScalarhwCpuOccupancy | read-only | current | System CPU occupancy. |
| 1.3.6.1.4.1.2011.6.3.18 | NodehwRingAttrTable | |||
| 1.3.6.1.4.1.2011.6.3.18.1 | ScalarhwRingFrequency | read-write | current | Frequency of ring. Options: 1. frequency16HZ(1) 2. frequency25HZ(2) 3. frequency50HZ(3) 4. frequency20HZ(4) |
| 1.3.6.1.4.1.2011.6.3.18.2 | ScalarhwRingacamplitude | read-write | current | AC amplitude of ring. Options: 1. acamplitude74Vrms(1) 2. acamplitude65Vrms(2) 3. acamplitude50Vrms(3) 4. acamplitude75Vrms(4) 5. acamplitude70Vrms(5) |
| 1.3.6.1.4.1.2011.6.3.18.3 | ScalarhwRingdcbias | read-write | current | DC bias of ring. Options: 1 2 |
| 1.3.6.1.4.1.2011.6.3.21 | NodehwIopacketfile | |||
| 1.3.6.1.4.1.2011.6.3.21.1 | ScalarhwIopacketfileAdminStatus | read-write | current | The status of the board software package. Options: 1. deactivepacketfile(0)-indicates that the status of the board software package is not active. 2. activepac… |
| 1.3.6.1.4.1.2011.6.3.22 | NodehwUpgrade | |||
| 1.3.6.1.4.1.2011.6.3.22.1 | ScalarhwUpgradeRequestID | read-write | current | The request index for automatic upgrade. For automatic upgrade: The NMS loads the NE program of the latest version, the data or configuration file after upgrad… |
| 1.3.6.1.4.1.2011.6.3.22.2 | ScalarhwUpgradeAdmin | read-write | current | The command of software active. Options: 1.nooperation(-1) - default state of the system. 2.uninterruptedAutoUpgrade(1) - uninterrupted auto upgrade. 3.upgrade… |
| 1.3.6.1.4.1.2011.6.3.22.3 | ScalarhwUpgradeResetInterval | read-write | current | The interval to force service boards to reset after the upgrade of mainboard has been completed. Unit:minute |
| 1.3.6.1.4.1.2011.6.3.22.4 | ScalarhwUpgradeTargetVersion | read-write | current | The target version of automatic upgrade. For example: MA5600V800R003C02. Allow querying the target version only during automatic upgrade. The system configurat… |
| 1.3.6.1.4.1.2011.6.3.22.5 | ScalarhwUpgradeReserveTimeout | read-write | current | Used to set the delay time of software active, in unit of seconds. When you set hwUpgradeReserveTimeout, you also need to set hwUpgradeAdmin to upgradeSchedule… |
| 1.3.6.1.4.1.2011.6.3.22.6 | ScalarhwUpgradeReserveDateTime | read-write | current | This object is used for setting the date and time of software active. When you set hwUpgradeReserveDateTime, you also need to set hwUpgradeAdmin to upgradeSche… |
| 1.3.6.1.4.1.2011.6.3.22.7 | ScalarhwEmergencyCallProtect | read-write | current | This object is used for setting the emergence call protection function. If this object is set to enable, the system cannot be reset if the system is processing… |
| 1.3.6.1.4.1.2011.6.3.22.8 | ScalarhwUpgradeCapability | read-only | current | The capability of upgrade. Options: 1.issu(0) - in servers software upgrade. 2.ossu(1) - out of servers softer upgrade. From left to right, each bit indicates … |
| 1.3.6.1.4.1.2011.6.3.23 | TablehwAgentOntInfoTable | not-accessible | current | The index of this table is hwFrameIndex, hwSlotIndex, hwPortIndex or hwOntIndex. OLT agent ONT INFO table. For hwFrameIndex, refer to hwFrameTable. For hwSlotI… |
| 1.3.6.1.4.1.2011.6.3.23.1 | RowhwAgentOntInfoEntry | not-accessible | current | The index of this entry is hwFrameIndex, hwSlotIndex, hwPortIndex or hwOntIndex. OLT agent ONT INFO table. For hwFrameIndex, refer to hwFrameTable. For hwSlotI… |
| 1.3.6.1.4.1.2011.6.3.23.1.1 | ColumnhwOntIndex | not-accessible | current | ONT ID. Parameters hwFrameIndex and hwSlotIndex are obligatory, hwOntIndex and hwPortIndex are optional (the setting -1 indicates that the parameter is optiona… |
| 1.3.6.1.4.1.2011.6.3.23.1.2 | ColumnhwOntState | read-only | current | ONT state. data structure: | m | ONT state combination | ONT state combination | | ONT state combination | | (2B) | in Port x | in Port y | ..... | in Port n |… |
| 1.3.6.1.4.1.2011.6.3.23.1.3 | ColumnhwOntType | read-only | current | ONT type. data structure: ONT IP + ONT type | ONT NUM | ONT IP | ONT type | | ONT IP | ONT type | | (2B) | (4B) | (16B) | ...... | (4B) | (16B) | Because of th… |
| 1.3.6.1.4.1.2011.6.3.23.1.4 | ColumnhwOntVersion | read-only | current | ONT version. data structure: ONT IP + ONT version | ONT NUM | ONT IP | ONT version | | ONT IP | ONT version | | (2B) | (4B) | (32B) | ...... | (4B) | (32B) | |
| 1.3.6.1.4.1.2011.6.3.24 | NodehwConfigLock | |||
| 1.3.6.1.4.1.2011.6.3.24.1 | ScalarhwConfigLockState | read-only | current | Whether the system configuration is locked. Options: 1. locked(1) -the system configuration is locked 2. unlocked(2) -the system configuration is not locked Th… |
| 1.3.6.1.4.1.2011.6.3.24.2 | ScalarhwConfigUnlockInterval | read-write | current | The interval for automatic unlock of the system configuration, in unit of minute. The system re-counts the time in these two cases: a user successfully locks t… |
| 1.3.6.1.4.1.2011.6.3.24.3 | ScalarhwConfigLockUserType | read-only | current | The type of user who locks system configuration. Options: 1. nooperation(-1) -default type of the system 2. nms(1) -the user who access through the NMS 3. seri… |
| 1.3.6.1.4.1.2011.6.3.24.4 | ScalarhwConfigLockUserName | read-only | current | The user name of the user who locks the configuration platform. |
| 1.3.6.1.4.1.2011.6.3.24.5 | ScalarhwConfigLockUserIPAddr | read-only | current | The IP address of the user who locks the configuration platform. If a user who accesses through the serial port locks the configuration platform, the IP addres… |
| 1.3.6.1.4.1.2011.6.3.24.6 | ScalarhwConfigLockOperate | read-write | current | The operation to lock or unlock config. Options: 1. lock(1) -before data configuration, use lock(1) to lock the configuration platform, preventing other users … |
| 1.3.6.1.4.1.2011.6.3.25 | NodehwIntelligentPhoneParaTable | |||
| 1.3.6.1.4.1.2011.6.3.25.1 | ScalarhwIntelligentPhoneMode | read-write | current | The switch of Intelligent-phone mode: disable or enable. DEFVAL { disable } Options: 1. disable(1) -if it is set to disable(1), the settings of hwAttenuation a… |
| 1.3.6.1.4.1.2011.6.3.25.2 | ScalarhwAttenuation | read-write | current | The value of Intelligent-signal attenuation: 0 dBm to 14 dBm. From 0 to 14 independently indicates form 0 dBm to 14 dBm. Default: 5 dBm. DEFVAL { 5 } |
| 1.3.6.1.4.1.2011.6.3.25.3 | ScalarhwDetectionThreshold | read-write | current | The threshold of intelligent-signal detection: 0 dBm to 28 dBm. From 0 to 28 independently indicates form 0 dBm to -28 dBm. Default: -15 dBm. DEFVAL { 15 } |
| 1.3.6.1.4.1.2011.6.3.26 | TablehwPstnBoardCfgTable | not-accessible | current | The index of this table is hwFrameIndex or hwSlotIndex. PstnBoard config table. |
| 1.3.6.1.4.1.2011.6.3.26.1 | RowhwPstnBoardCfgEntry | not-accessible | current | The index of this entry is hwFrameIndex or hwSlotIndex. PstnBoard config table. |
| 1.3.6.1.4.1.2011.6.3.26.1.1 | ColumnhwPowerMode | read-write | current | Indicates the power-mode of the board. Options: 1. generalMode(0) -Indicate that the board uses normal power supply 2. highMode(1) -Indicate that the board use… |
| 1.3.6.1.4.1.2011.6.3.27 | NodehwNatOnuTable | |||
| 1.3.6.1.4.1.2011.6.3.27.1 | NodehwNatOnuConfigInfoTable | |||
| 1.3.6.1.4.1.2011.6.3.27.1.1 | ScalarhwNatOnuMgmtSwitch | read-only | current | The status of the function of managing ONU through the NAT proxy for OLT: disable or enable. Options: 1.disable(1) - the state of the function is disabled 2.en… |
| 1.3.6.1.4.1.2011.6.3.27.1.2 | ScalarhwNatOnuVlanID | read-only | current | The VLANID of the Management Channel which ONU belongs to. -1 (default value) indicates this value is not configured. |
| 1.3.6.1.4.1.2011.6.3.27.1.3 | ScalarhwNatOnuIpAddr | read-only | current | The public IP Address of ONU under the Agent Management of OLT. |
| 1.3.6.1.4.1.2011.6.3.27.1.4 | ScalarhwNatOnuPriority | read-only | current | The Priority of the SNMP Message from ONU. |
| 1.3.6.1.4.1.2011.6.3.27.1.5 | ScalarhwNatOnuStartIp | read-write | current | The start IP Address of ONU Inner Ip Segment. |
| 1.3.6.1.4.1.2011.6.3.27.1.6 | ScalarhwNatOnuIpScope | read-write | current | The number of ONU Inner Ip. |
| 1.3.6.1.4.1.2011.6.3.27.2 | TablehwNatOnuUDPInfoTable | not-accessible | current | The index of this table is hwFrameIndex, hwSlotIndex, hwPortIndex or hwOntIndex. The UDP port distribution table of ONU. |
| 1.3.6.1.4.1.2011.6.3.27.2.1 | RowhwNatOnuUDPInfoEntry | not-accessible | current | The index of this entry is hwFrameIndex, hwSlotIndex, hwPortIndex or hwOntIndex. The UDP port distribution table of ONU. |
| 1.3.6.1.4.1.2011.6.3.27.2.1.1 | ColumnhwNatOnuUdpBegin | read-only | current | The start UDP Port Number of ONU which is managed by OLT through NAT. |
| 1.3.6.1.4.1.2011.6.3.28 | TablehwServiceMigrationTable | not-accessible | current | The service migration object table of Port or ONT. The objects in hwServiceMigrationTable are used for migrating service operations associated with Port or ONT… |
| 1.3.6.1.4.1.2011.6.3.28.1 | RowhwServiceMigrationEntry | not-accessible | current | The service migration object table of Port or ONT. The objects in hwServiceMigrationTable are used for migrating service operations associated with Port or ONT… |
| 1.3.6.1.4.1.2011.6.3.28.1.1 | ColumnhwServiceMigrationOntId | not-accessible | current | Ont ID. When hwOntId = 65535, the operating object is Port. When hwOntId != 65535, the operating object is ONT. |
| 1.3.6.1.4.1.2011.6.3.28.1.2 | ColumnhwServiceMigrationRowStatus | read-create | current | Indicates the row status, used for creating or deleting a migration object. createAndGo(4) and destroy(6) are supported. During the query operation, active(1) … |
| 1.3.6.1.4.1.2011.6.3.29 | TablehwServiceCfgMngtTable | not-accessible | current | The service configuration object table of Port or ONT. The objects in hwServiceCfgMngtTable are used for configuration operations associated with port or ONT. … |
| 1.3.6.1.4.1.2011.6.3.29.1 | RowhwServiceCfgMngtEntry | not-accessible | current | The service configuration object table of Port or ONT. The objects in hwServiceCfgMngtTable are used for configuration operations associated with port or ONT. … |
| 1.3.6.1.4.1.2011.6.3.29.1.1 | ColumnhwServiceCfgOntId | not-accessible | current | Ont ID. When hwOntId = 65535, the operating object is Port. When hwOntId != 65535, the operating object is ONT. |
| 1.3.6.1.4.1.2011.6.3.29.1.2 | ColumnhwServiceCfgOperStatus | read-only | current | The service configuration object status. Options: 1. srvCfgDeleting(1) -The operation is in deleting state. 2. srvCfgDeletionComplete(2) -The operation success… |
| 1.3.6.1.4.1.2011.6.3.29.1.3 | ColumnhwServiceCfgRowStatus | read-create | current | Indicates the row status, used for creating or deleting a service configuration object. createAndGo(4) and destroy(6) are supported. During the query operation… |
| 1.3.6.1.4.1.2011.6.3.30 | TablehwSysCapabilityTable | not-accessible | current | Description of the device dynamic capability. The capability value is stored in 16 byte(128 bit), each bit denotes one capability, 1 equals support, 0 equals n… |
| 1.3.6.1.4.1.2011.6.3.30.1 | RowhwSysCapabilityEntry | not-accessible | current | Description of the device dynamic capability. The capability value is stored in 16 byte(128 bit), each bit denotes one capability, 1 equals support, 0 equals n… |
| 1.3.6.1.4.1.2011.6.3.30.1.1 | ColumnhwCapabilityFeatureID | read-only | current | The id of device feature. Options: 1.system(1) - feature of system |
| 1.3.6.1.4.1.2011.6.3.30.1.2 | ColumnhwCapabilityFeatureValue | read-only | current | The vaule of device capability. When hwCapabilityFeatureID equals system(1), bit from left to right represents: 0.AG capability 1.BFD capability The value of t… |
| 1.3.6.1.4.1.2011.6.3.30.1.3 | ColumnhwCapabilityFeatureMask | read-only | current | The mask of device capability. When hwCapabilityFeatureID equals system(1), bit from left to right represents: 0.AG capability 1.BFD capability The value of th… |
| 1.3.6.1.4.1.2011.6.3.31 | NodehwDevLedLight | |||
| 1.3.6.1.4.1.2011.6.3.31.1 | ScalarhwDevLedLightByNms | read-write | current | This node supports the SET operation: If the pre-deployment on the NMS fails, the RUN indicator turns yellow by set ledOn(1). A half an hour later, the yellow … |
| 1.3.6.1.4.1.2011.6.3.32 | NodehwBandwidth | |||
| 1.3.6.1.4.1.2011.6.3.32.1 | ScalarhwBandwidthMode | read-write | current | Configuring the bandwidth mode of the device. Options: 1.bandwidth40G(1) - 40G 2.bandwidth80G(2) - 80G 3.bandwidth160G(3) - 160G 4.bandwidth50G(4) - 50G 5.band… |
| 1.3.6.1.4.1.2011.6.3.34 | TablehwOntRemoteHttpChnlCfgTable | not-accessible | current | This table describes parameters that need to be delivered to the OLT and ONT during remote access to the ONT through the web page. |
| 1.3.6.1.4.1.2011.6.3.34.1 | RowhwOntRemoteHttpChnlCfgEntry | not-accessible | current | The index of this entry is hwFrameIndex,hwSlotIndex,hwPortIndex,hwOntIndex. |
| 1.3.6.1.4.1.2011.6.3.34.1.1 | ColumnhwOntRemoteHttpChnlVlan | read-create | current | Indicates the VLAN ID of the ONT. If this parameter is not specified, the system automatically obtains an unoccupied VLAN ID and uses it as the default VLAN ID. |
| 1.3.6.1.4.1.2011.6.3.34.1.2 | ColumnhwOntRemoteHttpChnlIpAddress | read-create | current | Indicates the IP address of the ONT. If this parameter is not specified, the system selects an unoccupied IP address and uses it as the default IP address. |
| 1.3.6.1.4.1.2011.6.3.34.1.3 | ColumnhwOntRemoteHttpChnlHttpPort | read-create | current | Indicates the web server port of the ONT. If this parameter is not specified, port 80 is used by default. |
| 1.3.6.1.4.1.2011.6.3.34.1.4 | ColumnhwOntRemoteHttpChnlProtocol | read-create | current | Indicates the protocol type of the web server of the ONT. If this parameter is not specified, HTTPS protocol is used by default. |
| 1.3.6.1.4.1.2011.6.3.34.1.5 | ColumnhwOntRemoteHttpChnlUserName | read-create | current | Indicates the user name used for a temporary user to log in to the web server of the ONT. If this parameter is not specified, the existing user name and passwo… |
| 1.3.6.1.4.1.2011.6.3.34.1.6 | ColumnhwOntRemoteHttpChnlPassword | read-create | current | Indicates the password used for a temporary user to log in to the web server of the ONT, which can consist of numbers, uppercase letters, lowercase letters, an… |
| 1.3.6.1.4.1.2011.6.3.34.1.7 | ColumnhwOntRemoteHttpProxyPort | read-only | current | Indicates the port ID of the TCP proxy during remote access to the ONT from the OLT through the web page, which is port 8024 fixedly. |
| 1.3.6.1.4.1.2011.6.3.34.1.8 | ColumnhwOntRemoteHttpChnlDuration | read-create | current | Indicates the ONT login duration of a temporary user (unit: minute). If this parameter is not specified, the login duration is 30 minutes by default. |
| 1.3.6.1.4.1.2011.6.3.34.1.9 | ColumnhwOntRemoteHttpProxyStatus | read-only | current | Indicates the enabling status of the TCP proxy. The initial state is disable. |
| 1.3.6.1.4.1.2011.6.3.34.1.10 | ColumnhwOntRemoteHttpChnlRowStatus | read-create | current | Indicates the row status, used for creating or deleting a service configuration object. createAndGo(4) and destroy(6) are supported. During the query operation… |
| 1.3.6.1.4.1.2011.6.3.101 | NodehwDevConformance | |||
| 1.3.6.1.4.1.2011.6.3.101.1 | NodehwDevCompliances | |||
| 1.3.6.1.4.1.2011.6.3.101.1.1 | CompliancehwDevCompliance | current | The compliance statement for SNMP entities which implement HUAWEI DEVICE MIB. | |
| 1.3.6.1.4.1.2011.6.3.101.2 | NodehwDevGroups | |||
| 1.3.6.1.4.1.2011.6.3.101.2.1 | GrouphwSystemParaGroup | current | hwSystemPara. | |
| 1.3.6.1.4.1.2011.6.3.101.2.2 | GrouphwFrameLinksGroup | current | hwFrameLinks. | |
| 1.3.6.1.4.1.2011.6.3.101.2.4 | GrouphwDevCompatibleTableGroup | current | hwDevCompatibleTable. | |
| 1.3.6.1.4.1.2011.6.3.101.2.5 | GrouphwDevCpuGroup | current | hwDevCpuGroup. | |
| 1.3.6.1.4.1.2011.6.3.101.2.6 | GrouphwDevMemGroup | current | hwDevMemGroup. | |
| 1.3.6.1.4.1.2011.6.3.101.2.7 | GrouphwDevBufGroup | current | hwDevBufGroup. | |
| 1.3.6.1.4.1.2011.6.3.103 | NodehwDevSnmpProbeMonitor | |||
| 1.3.6.1.4.1.2011.6.3.103.1 | NodehwDevSnmpProbeMonitorPara | |||
| 1.3.6.1.4.1.2011.6.3.103.1.1 | ScalarhwDevSnmpProbeMonitorSwitch | read-write | current | The object specifies the switch state of SNMP probe monitor. Options: enable(1) -indicates the SNMP probe monitor switch is on. disable(2) -indicates the SNMP … |
| 1.3.6.1.4.1.2011.6.3.103.1.2 | ScalarhwDevSnmpProbeMonitorActiveThreshold | read-write | current | The object specifies the active-threshold of SNMP probe monitor. From 3 minutes to 60 minutes. Default: 15 minutes. |
| 1.3.6.1.4.1.2011.6.3.103.2 | TablehwDevSnmpProbeHostTable | not-accessible | current | The SNMP probe monitor table, which supports the functions of querying the information of SNMP probe monitor. The index of this table is hwDevSnmpProbeHostInde… |
| 1.3.6.1.4.1.2011.6.3.103.2.1 | RowhwDevSnmpProbeHostEntry | not-accessible | current | The SNMP probe monitor table, which supports the functions of querying the information of SNMP probe monitor. The index of this table is hwDevSnmpProbeHostInde… |
| 1.3.6.1.4.1.2011.6.3.103.2.1.1 | ColumnhwDevSnmpProbeHostIndex | read-only | current | The object specifies the index of SNMP probe monitor. |
| 1.3.6.1.4.1.2011.6.3.103.2.1.2 | ColumnhwDevSnmpProbeHostIpAddressType | read-only | current | The object specifies the IP address type of SNMP probe monitor: Options: ipv4(1) -indicates an IPv4 address ipv6(2) -indicates an IPv6 address |
| 1.3.6.1.4.1.2011.6.3.103.2.1.3 | ColumnhwDevSnmpProbeHostIpAddress | read-only | current | The object specifies the IP address of SNMP probe monitor. |
| 1.3.6.1.4.1.2011.6.3.103.2.1.4 | ColumnhwDevSnmpProbeReceivedCount | read-only | current | The object specifies the total probe count of SNMP probe monitor. |
| 1.3.6.1.4.1.2011.6.3.103.2.1.5 | ColumnhwDevSnmpProbeInitiallyReceivedTime | read-only | current | The object specifies the initial probe time of SNMP probe monitor. |
| 1.3.6.1.4.1.2011.6.3.103.2.1.6 | ColumnhwDevSnmpProbeRecentlyReceivedTime | read-only | current | The object specifies the recent probe time of SNMP probe monitor. |
| 1.3.6.1.4.1.2011.6.3.103.2.1.7 | ColumnhwDevSnmpProbeMinimumInterval | read-only | current | The object specifies the minimum interval of SNMP probe monitor, unit second. |
| 1.3.6.1.4.1.2011.6.3.103.2.1.8 | ColumnhwDevSnmpProbeMaxmumInterval | read-only | current | The object specifies the maxmum interval of SNMP probe monitor, unit second. |
| 1.3.6.1.4.1.2011.6.3.103.2.1.9 | ColumnhwDevSnmpProbeAverageInterval | read-only | current | The object specifies the average interval of SNMP probe monitor, unit second. |
| 1.3.6.1.4.1.2011.6.3.103.3 | TablehwDevSnmpProbeRecordTable | not-accessible | current | The abnormal record table of SNMP probe monitor, which supports the functions of querying the abnormal record of SNMP probe monitor. The index of this table is… |
| 1.3.6.1.4.1.2011.6.3.103.3.1 | RowhwDevSnmpProbeRecordEntry | not-accessible | current | The abnormal record table of SNMP probe monitor, which supports the functions of querying the abnormal record of SNMP probe monitor. The index of this table is… |
| 1.3.6.1.4.1.2011.6.3.103.3.1.1 | ColumnhwDevSnmpProbeRecordIndex | read-only | current | The object specifies the index of abnormal record. |
| 1.3.6.1.4.1.2011.6.3.103.3.1.2 | ColumnhwDevSnmpProbeRecordHostIpAddressType | read-only | current | The object specifies the IP address type of abnormal record: Options: ipv4(1) -indicates an IPv4 address ipv6(2) -indicates an IPv6 address |
| 1.3.6.1.4.1.2011.6.3.103.3.1.3 | ColumnhwDevSnmpProbeRecordHostIpAddress | read-only | current | The object specifies the IP address of abnormal record. |
| 1.3.6.1.4.1.2011.6.3.103.3.1.4 | ColumnhwDevSnmpProbeRecordLastReceivedTime | read-only | current | The object specifies the last probe time of abnormal record. |
| 1.3.6.1.4.1.2011.6.3.103.3.1.5 | ColumnhwDevSnmpProbeRecordReceivedCount | read-only | current | The object specifies the total probe count of abnormal record. |
| 1.3.6.1.4.1.2011.6.3.103.3.1.6 | ColumnhwDevSnmpProbeRecordMinimumInterval | read-only | current | The object specifies the minimum interval of abnormal record, unit second. |
| 1.3.6.1.4.1.2011.6.3.103.3.1.7 | ColumnhwDevSnmpProbeRecordMaxmumInterval | read-only | current | The object specifies the maxmum interval of abnormal record, unit second. |
| 1.3.6.1.4.1.2011.6.3.103.3.1.8 | ColumnhwDevSnmpProbeRecordAverageInterval | read-only | current | The object specifies the average interval of the abnormal record, unit second. |