HUAWEI-DSLAM-ACL-MIB
127 objects
The MIB is used for configuring ACL rules. An access control list (ACL) is used to filter the specified data packets according to a series of matching rules configured in the ACL packets so that undesired data packets can be identified. By using the matching rules, network devices can permit or deny the matching data packets to pass.
Imported Objects
| HUAWEI-MIB | huaweiMgmt |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.1 | IdentityhwAcl | The MIB is used for configuring ACL rules. An access control list (ACL) is used to filter the specified data packets according to a series of matching rules co… | ||
| 1.3.6.1.4.1.2011.5.1.1 | NodehwAclMibObjects | |||
| 1.3.6.1.4.1.2011.5.1.1.2 | TablehwAclNumGroupTable | not-accessible | current | Describes the configured ACL rule groups in the system and basic information about each group, such as the number of rules, steps, and ACL rule descriptions. T… |
| 1.3.6.1.4.1.2011.5.1.1.2.1 | RowhwAclNumGroupEntry | not-accessible | current | Describes the configured ACL rule groups in the system and basic information about each group, such as the number of rules, steps, and ACL rule descriptions. T… |
| 1.3.6.1.4.1.2011.5.1.1.2.1.1 | ColumnhwAclNumGroupAclNum | not-accessible | current | Uniquely identifies an ACL rule group. Range: 2000-5999, -1 The ACL rule groups with indexes ranging from 2000 to 2999 are basic ACL rule groups. When hwAclBas… |
| 1.3.6.1.4.1.2011.5.1.1.2.1.2 | ColumnhwAclNumGroupMatchOrder | read-only | current | Indicates the priority order of an ACL rule group. Options: 1. config(1) -the priority order of an ACL rule group is configuration order 2. auto(2) -the priori… |
| 1.3.6.1.4.1.2011.5.1.1.2.1.3 | ColumnhwAclNumGroupSubitemNum | read-only | current | Indicates the number of ACL rules in an ACL rule group. This leaf is read-only. The value increases by one when an ACL rule is added to the ACL rule group. |
| 1.3.6.1.4.1.2011.5.1.1.2.1.4 | ColumnhwAclNumGroupStep | read-create | current | Indicates the step of adding ACL rules to an ACL rule group. Range: 1-20 When an ACL rule is added and its ID is not specified, the ID of the ACL rule is: step… |
| 1.3.6.1.4.1.2011.5.1.1.2.1.5 | ColumnhwAclNumGroupDescription | read-create | current | Indicates the description of an ACL rule group. It is used for users to identify different ACL rule groups. Up to 127 characters are supported. If hwAclNumGrou… |
| 1.3.6.1.4.1.2011.5.1.1.2.1.6 | ColumnhwAclNumGroupCountClear | read-create | current | Used for clearing the software statistics of an ACL rule group. Options: 1. cleared(1) -clear the software statistics of an ACL rule group 2. nouse(2) -indicat… |
| 1.3.6.1.4.1.2011.5.1.1.2.1.7 | ColumnhwAclNumGroupRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create an ACL rule group 3. des… |
| 1.3.6.1.4.1.2011.5.1.1.2.1.8 | ColumnhwAclNumGroupAclType | read-create | current | indicates the type of the ACL group. Options: 1. basicAcl(2) -Indicates that the type of the ACL group is basic. 2. advAcl(3) -Indicates that the type of the A… |
| 1.3.6.1.4.1.2011.5.1.1.2.1.9 | ColumnhwAclNumGroupAclNumAllocMethod | read-create | current | indicates the method of allocating the ACL group index automatically. When this leaf is queried, the value is fixed to minFreeId(1). Options: 1. minFreeId(1) -… |
| 1.3.6.1.4.1.2011.5.1.1.4 | TablehwAclBasicRuleTable | not-accessible | current | Describes the details about a basic ACL rule in a basic ACL rule group, including the source IP address, mask, and other attributes of the rule. The indexes of… |
| 1.3.6.1.4.1.2011.5.1.1.4.1 | RowhwAclBasicRuleEntry | not-accessible | current | Describes the details about a basic ACL rule in a basic ACL rule group, including the source IP address, mask, and other attributes of the rule. The indexes of… |
| 1.3.6.1.4.1.2011.5.1.1.4.1.1 | ColumnhwAclBasicAclNum | accessible-for-notify | current | Uniquely identifies a basic ACL rule group. Range: 2000-2999 Make sure that the ID of the ACL rule group is already created in hwAclNumGroupTable. |
| 1.3.6.1.4.1.2011.5.1.1.4.1.2 | ColumnhwAclBasicSubitem | accessible-for-notify | current | Describes the ID of a basic ACL rule in the basic ACL rule group, uniquely identifying a basic ACL rule. Range: 0-4294967295 In the create operation, if the va… |
| 1.3.6.1.4.1.2011.5.1.1.4.1.3 | ColumnhwAclBasicAct | read-create | current | Describes the action of an ACL rule. Options: 1. permit(1) -indicates that the data packets that meet the conditions can pass 2. deny(2) -indicates that the da… |
| 1.3.6.1.4.1.2011.5.1.1.4.1.4 | ColumnhwAclBasicSrcIp | read-create | current | Describes the source IP address or network segment of data frames that needs to match a basic ACL rule. You can set or not set it. If you do not set it, any so… |
| 1.3.6.1.4.1.2011.5.1.1.4.1.5 | ColumnhwAclBasicSrcWild | read-create | current | Describes the mask of the source IP address or network segment of data frames that needs to match a basic ACL rule. To match the basic ACL rule with a subnet, … |
| 1.3.6.1.4.1.2011.5.1.1.4.1.6 | ColumnhwAclBasicTimeRangeIndex | read-create | current | Describes the time range index of a basic ACL rule. It is used when the effective time of a basic ACL rule needs to be configured. By default, the value is 0, … |
| 1.3.6.1.4.1.2011.5.1.1.4.1.7 | ColumnhwAclBasicFragments | read-create | current | Describes whether a basic ACL rule is effective on only non-tail fragment packets. Options: 1. true(1) -indicates that a basic ACL rule is effective on only no… |
| 1.3.6.1.4.1.2011.5.1.1.4.1.8 | ColumnhwAclBasicLog | read-create | current | Describes whether to record the log of a basic ACL rule. Options: 1. true(1) -records the log of a basic ACL rule 2. false(2) -does not record the log of a bas… |
| 1.3.6.1.4.1.2011.5.1.1.4.1.9 | ColumnhwAclBasicEnable | read-only | current | Describes whether a basic ACL rule is valid. Options: 1. true(1) -a basic ACL rule is valid 2. false(2) -a basic ACL rule is invalid If the basic ACL rule is a… |
| 1.3.6.1.4.1.2011.5.1.1.4.1.10 | ColumnhwAclBasicCount | read-only | current | Describes the statistics of packets that match the basic ACL rule. |
| 1.3.6.1.4.1.2011.5.1.1.4.1.11 | ColumnhwAclBasicCountClear | read-create | current | Clears the statistics of packets that match the basic ACL rule. Options: 1. cleared(1) -clear the statistics of packets that match the basic ACL rules 2. nouse… |
| 1.3.6.1.4.1.2011.5.1.1.4.1.12 | ColumnhwAclBasicRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a basic ACL rule 3. dest… |
| 1.3.6.1.4.1.2011.5.1.1.4.1.13 | ColumnhwAclBasicPriority | read-create | current | Describes the priority of a basic ACL rule. Range: 0-9 Default: 0 The priority ascends with the value. When multiple rules are matched at the same time, the ru… |
| 1.3.6.1.4.1.2011.5.1.1.5 | TablehwAclAdvancedRuleTable | not-accessible | current | Describes the details about an advanced ACL rule in an advanced ACL rule group. The indexes of this table are hwAclAdvancedAclNum and hwAclAdvancedSubitem. hwA… |
| 1.3.6.1.4.1.2011.5.1.1.5.1 | RowhwAclAdvancedRuleEntry | not-accessible | current | Describes the details about an advanced ACL rule in an advanced ACL rule group. The indexes of this entry are hwAclAdvancedAclNum and hwAclAdvancedSubitem. hwA… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.1 | ColumnhwAclAdvancedAclNum | accessible-for-notify | current | Uniquely identifies an advanced ACL rule group. Range: 3000-3999 Make sure that the ID of the ACL rule group is already created in hwAclNumGroupTable. |
| 1.3.6.1.4.1.2011.5.1.1.5.1.2 | ColumnhwAclAdvancedSubitem | accessible-for-notify | current | Describes the ID of an advanced ACL rule in an advanced ACL rule group, uniquely identifying an advanced ACL rule. Range: 0-4294967295 In the create operation,… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.3 | ColumnhwAclAdvancedAct | read-create | current | Describes the action of an advanced ACL rule. Options: 1. permit(1) -indicates that the data packets that meet the conditions can pass 2. deny(2) -indicates th… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.4 | ColumnhwAclAdvancedProtocol | read-create | current | Describes the protocol of IP packets that matches an advanced ACL rule. Range: 0-255 Default: 0 If the value is not specified for an advanced ACL rule, the inv… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.5 | ColumnhwAclAdvancedSrcIp | read-create | current | Describes the source IP address or network segment of data frames that needs to match an advanced ACL rule. You can set or not set it. If you do not set it, an… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.6 | ColumnhwAclAdvancedSrcWild | read-create | current | Describes the mask of the source IP address or network segment of data frames that needs to match an advanced ACL rule. To match an advanced ACL rule with a su… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.7 | ColumnhwAclAdvancedSrcOp | read-create | current | Describes the operation types of comparing packet source ports when the type of hwAclAdvancedProtocol is set to TCP or UDP. Range: 0-5 Options: 1. invalid(0) -… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.8 | ColumnhwAclAdvancedSrcPort1 | read-create | current | Describes the operation value of port 1 in the comparison operation types of the source port in hwAclAdvancedSrcOp when hwAclAdvancedProtocol is set to TCP or … |
| 1.3.6.1.4.1.2011.5.1.1.5.1.9 | ColumnhwAclAdvancedSrcPort2 | read-create | current | Describes the operation value of port 2 in the comparison operation types of the source port in hwAclAdvancedSrcOp when hwAclAdvancedProtocol is set to TCP or … |
| 1.3.6.1.4.1.2011.5.1.1.5.1.10 | ColumnhwAclAdvancedDestIp | read-create | current | Describes the destination IP address or network segment of data frames that an advanced ACL rule needs to match. You can set or not set it. If you do not set i… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.11 | ColumnhwAclAdvancedDestWild | read-create | current | Describes the mask of the destination IP address or network segment of data frames that an advanced ACL rule needs to match. To match an advanced ACL rule with… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.12 | ColumnhwAclAdvancedDestOp | read-create | current | Describes the operation type of comparing protocol destination ports when hwAclAdvancedProtocol is set to TCP or UDP. Ranges: 0-5 Options: 1. invalid(0) -indic… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.13 | ColumnhwAclAdvancedDestPort1 | read-create | current | Describes the operation value of port 1 in the comparison operation types of the destination port in hwAclAdvancedDestOp when hwAclAdvancedProtocol is set to T… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.14 | ColumnhwAclAdvancedDestPort2 | read-create | current | Describes the operation value of port 2 in the comparison operation types of the destination port in hwAclAdvancedDestOp when hwAclAdvancedProtocol is set to T… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.15 | ColumnhwAclAdvancedPrecedence | read-create | current | Describes the priority field of data frames that an advanced ACL rule needs to match. If the value is not specified for an advanced ACL rule, the invalid value… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.16 | ColumnhwAclAdvancedTos | read-create | current | Describes the type of service (ToS) field of data frames that an advanced ACL rule needs to match. Range: 0-15, 255 If the value is not specified for an advanc… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.17 | ColumnhwAclAdvancedDscp | read-create | current | Describes the differentiated services code point (DSCP) value of data frames that an advanced ACL rule needs to match. Range: 0-63, 255 If the value is not spe… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.18 | ColumnhwAclAdvancedEstablish | read-create | current | Describes whether to match the first SYN packet for TCP connection establishment when hwAclAdvancedProtocol is set to TCP. When filter the packets for TCP conn… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.19 | ColumnhwAclAdvancedTimeRangeIndex | read-create | current | Describes the time range index of an advanced ACL rule. It is used when the effective time of an advanced ACL rule needs to be configured. By default, the valu… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.20 | ColumnhwAclAdvancedIcmpType | read-create | current | Describes the ICMP type when packets are filtered by ICMP type and when hwAclAdvancedProtocol is set to ICMP. Range: 0-255, 256 If the value is not specified f… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.21 | ColumnhwAclAdvancedIcmpCode | read-create | current | Describes ICMP codes that the ICMP packets are filtered both by ICMP type and ICMP code when hwAclAdvancedProtocol is set to ICMP. Range: 0-255, 256 If the val… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.22 | ColumnhwAclAdvancedFragments | read-create | current | Describes whether an advanced ACL rule is effective on only non-tail fragment packets. Options: 1. true(1) -indicates that an advanced ACL rule is effective on… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.23 | ColumnhwAclAdvancedLog | read-create | current | Describes whether to record the log flag byte of an advanced ACL rule. Options: 1. true(1) -records the log flag byte of an advanced ACL rule 2. false(2) -does… |
| 1.3.6.1.4.1.2011.5.1.1.5.1.24 | ColumnhwAclAdvancedEnable | read-only | current | Describes whether an advanced ACL rule is valid. Options: 1. true(1) -indicates that an advanced ACL rule is valid 2. false(2) -indicates that an advanced ACL … |
| 1.3.6.1.4.1.2011.5.1.1.5.1.25 | ColumnhwAclAdvancedCount | read-only | current | Describes the statistics of packets that match the advanced ACL rule. |
| 1.3.6.1.4.1.2011.5.1.1.5.1.26 | ColumnhwAclAdvancedCountClear | read-create | current | Clears the statistics of packets that match the advanced ACL rule. Options: 1. cleared(1) -clear the statistics of packets that match the advanced ACL rule 2. … |
| 1.3.6.1.4.1.2011.5.1.1.5.1.27 | ColumnhwAclAdvancedRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create an advanced ACL rule 3. … |
| 1.3.6.1.4.1.2011.5.1.1.5.1.28 | ColumnhwAclAdvancedPriority | read-create | current | Describes the priority of advanced ACL rules. Range: 0-9 Default: 0 The priority ascends with the value. When multiple rules are matched at the same time, the … |
| 1.3.6.1.4.1.2011.5.1.1.7 | TablehwAclLinkTable | not-accessible | current | Describes the details about an L2 ACL rule in an L2 ACL rule group, including the MAC address and VLAN. The indexes of this table are hwAclLinkAclNum and hwAcl… |
| 1.3.6.1.4.1.2011.5.1.1.7.1 | RowhwAclLinkEntry | not-accessible | current | Describes the details about an L2 ACL rule in an L2 ACL rule group, including the MAC address and VLAN. The indexes of this entry are hwAclLinkAclNum and hwAcl… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.1 | ColumnhwAclLinkAclNum | accessible-for-notify | current | Uniquely identifies an L2 ACL rule group. Range: 4000-4999 Make sure that the ID of the L2 ACL rule group is already created in hwAclNumGroupTable. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.2 | ColumnhwAclLinkSubitem | accessible-for-notify | current | Describes the ID of an L2 ACL rule, uniquely identifying an L2 ACL rule in an L2 ACL rule group. Range: 0-4294967295 In the create operation, if the value is 4… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.3 | ColumnhwAclLinkAct | read-create | current | Describes the value of an L2 ACL rule. Options: 1. permit(1) -indicates that the data packets that meet the conditions can pass. When you need to configure an … |
| 1.3.6.1.4.1.2011.5.1.1.7.1.4 | ColumnhwAclLinkProtocol | read-create | current | Describes the protocol types of Ethernet packets that the L2 ACL rules need to match. Range:1-65536 If the value of an L2 ACL rule is not specified, the invali… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.5 | ColumnhwAclLinkFormatType | read-only | current | Describes the types of packets that the L2 ACL rules need to match. Options: 1. invalid(0) -in the query operation, invalid(0) is always returned. 2. ethernetI… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.6 | ColumnhwAclLinkVlanTag | read-only | current | Describes whether a VLAN tag is carried in the packets that the L2 ACL rules need to match. Options: 1. invalid(0) -in the query operation, invalid(0) is alway… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.7 | ColumnhwAclLinkVlanPri | read-create | current | Describes the 802.1p priority of data frames that an L2 ACL rule needs to match. Options: 1. bestEffort(0) -indicates best-effort priority 2. background(1) -in… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.8 | ColumnhwAclLinkSrcVlanId | read-create | current | Describes the VLAN ID of data frames that an L2 ACL rule needs to match. Range: 0-4093 If the value of an L2 ACL rule is not specified, the invalid value 0 is … |
| 1.3.6.1.4.1.2011.5.1.1.7.1.9 | ColumnhwAclLinkSrcMac | read-create | current | Describes the source MAC address of data frames that an L2 ACL rule needs to match. Default: 0x00 0x00 0x00 0x00 0x00 0x00 It is a 6-byte hexadecimal string, f… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.10 | ColumnhwAclLinkSrcMacWild | read-create | current | Describes the source MAC address wildcard of data frames that an L2 ACL rule needs to match. It is the inverse mask of the source MAC address. Default: 0xff 0x… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.11 | ColumnhwAclLinkSrcIfIndex | read-only | current | This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.12 | ColumnhwAclLinkSrcAny | read-create | current | Describes whether an L2 ACL rule matches a source MAC address. Options: 1. true(1) -indicates that the source MAC address of data frames can be any address 2. … |
| 1.3.6.1.4.1.2011.5.1.1.7.1.13 | ColumnhwAclLinkDestVlanId | read-only | current | This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.14 | ColumnhwAclLinkDestMac | read-create | current | Describes the inner VLAN ID of the packets that an L2 ACL rule needs to match. Default: 0x00 0x00 0x00 0x00 0x00 0x00 It is a 6-byte hexadecimal string, for ex… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.15 | ColumnhwAclLinkDestMacWild | read-create | current | Describes the destination MAC address wildcard of data frames that an L2 ACL rule needs to match. It is the inverse mask of the destination MAC address. Defaul… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.16 | ColumnhwAclLinkDestIfIndex | read-only | current | This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity. |
| 1.3.6.1.4.1.2011.5.1.1.7.1.17 | ColumnhwAclLinkDestAny | read-create | current | Describes whether an L2 ACL rule matches a destination MAC address. Options: 1. true(1) -indicates that the destination MAC address of data frames can be any a… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.18 | ColumnhwAclLinkTimeRangeIndex | read-create | current | Describes the time range index of an L2 ACL rule. It is used when the effective time of an L2 ACL rule needs to be configured. By default, the value is 0, whic… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.19 | ColumnhwAclLinkEnable | read-only | current | Describes whether an L2 ACL rule is valid. Options: 1. true(1) -indicates validity 2. false(2) -indicates invalidity If the L2 ACL rule is associated with a ti… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.20 | ColumnhwAclLinkRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create an L2 ACL rule 3. destro… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.21 | ColumnhwAclLinkPriority | read-create | current | Describes the priority of L2 ACL rules. Range: 0-9 Default: 0 The priority ascends with the value. When multiple rules are matched at the same time, the rule w… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.22 | ColumnhwAclLinkInnerVlanPri | read-create | current | Describes the 802.1p priority in the inner VLAN of the packet that an L2 ACL rules needs to match. Range: 0-7, 255 The priority ascends with the value. Options… |
| 1.3.6.1.4.1.2011.5.1.1.7.1.23 | ColumnhwAclLinkSrcInnerVlanId | read-create | current | The source inner VLAN ID of the packet. Value range: 0-4093 0 indicates the hwAclLinkSrcVlanId is invalid. |
| 1.3.6.1.4.1.2011.5.1.1.8 | TablehwAclUserTable | not-accessible | current | Describes the details about a user-defined ACL rule in a user-defined ACL rule group, including the matched character string and mask. The two fields are a bin… |
| 1.3.6.1.4.1.2011.5.1.1.8.1 | RowhwAclUserEntry | not-accessible | current | Describes the details about a user-defined ACL rule in a user-defined ACL rule group, including the matched character string and mask. The two fields are a bin… |
| 1.3.6.1.4.1.2011.5.1.1.8.1.1 | ColumnhwAclUserAclNum | accessible-for-notify | current | Uniquely identifies a user-defined ACL rule group. Range: 5000-5999 Make sure that the ID of a user-defined ACL rule group is already created in hwAclNumGroupT… |
| 1.3.6.1.4.1.2011.5.1.1.8.1.2 | ColumnhwAclUserSubitem | accessible-for-notify | current | Describes the ID of a user-defined ACL rule, uniquely identifying a user-defined ACL rule in a user-defined ACL rule group. Range: 0-4294967295 In the create o… |
| 1.3.6.1.4.1.2011.5.1.1.8.1.3 | ColumnhwAclUserAct | read-create | current | Describes the value of a user-defined ACL rule. Options: 1. permit(1) -indicates that the data packets that meet the conditions can pass. When you need to conf… |
| 1.3.6.1.4.1.2011.5.1.1.8.1.4 | ColumnhwAclUserFormatType | read-only | current | This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity. Options: 1. invalid(0) -invalid value 2. ethernetII(1… |
| 1.3.6.1.4.1.2011.5.1.1.8.1.5 | ColumnhwAclUserVlanTag | read-only | current | This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity. Options: 1. invalid(0) -invalid value 2. tagged(1) -t… |
| 1.3.6.1.4.1.2011.5.1.1.8.1.6 | ColumnhwAclUserRuleStr | read-create | current | Describes the character string of a user-defined ACL rule. It is used to match the first bytes of packets. The character string must be hexadecimal and bytes. … |
| 1.3.6.1.4.1.2011.5.1.1.8.1.7 | ColumnhwAclUserRuleMask | read-create | current | Describes the mask of the user-defined ACL rule. It is a positive mask. When it is 1, it indicates that matching is required. The device determines the field v… |
| 1.3.6.1.4.1.2011.5.1.1.8.1.8 | ColumnhwAclUserRowOffset | read-only | current | This leaf is not used. The value 0 is always returned in the query operation, which indicates invalidity. |
| 1.3.6.1.4.1.2011.5.1.1.8.1.9 | ColumnhwAclUserTimeRangeIndex | read-create | current | Describes the time range index of a user-defined ACL rule. It is used when the effective time of a user-defined ACL rule needs to be configured. By default, th… |
| 1.3.6.1.4.1.2011.5.1.1.8.1.10 | ColumnhwAclUserEnable | read-only | current | Describes whether a user-defined ACL rule is valid. Options: 1. true(1) -indicates the user-defined ACL rule is valid 2. false(2) -indicates the user-defined A… |
| 1.3.6.1.4.1.2011.5.1.1.8.1.11 | ColumnhwAclUserRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a user-defined ACL rule … |
| 1.3.6.1.4.1.2011.5.1.1.8.1.12 | ColumnhwAclUserFrameType | read-write | current | Describes the type of a VLAN tag in the packet that matches the user-defined ACL rule. Options: 1. ipoe(0) -indicates that IP packets carrying no VLAN tags and… |
| 1.3.6.1.4.1.2011.5.1.1.8.1.13 | ColumnhwAclUserPriority | read-create | current | Describes the priority of user-defined ACL rules. Range: 0-9 Default: 0 The priority ascends with the value. When multiple rules are matched at the same time, … |
| 1.3.6.1.4.1.2011.5.1.1.9 | TablehwAclActiveTable | not-accessible | current | Describes the relationships between an ACL rule and a port or a slot. You can deliver an ACL rule to a port or a slot and make it take effect on the port or a … |
| 1.3.6.1.4.1.2011.5.1.1.9.1 | RowhwAclActiveEntry | not-accessible | current | Describes the relationships between an ACL rule and a port or a slot. You can deliver an ACL rule to a port or a slot and make it take effect on the port or a … |
| 1.3.6.1.4.1.2011.5.1.1.9.1.1 | ColumnhwAclActiveAclIndex | accessible-for-notify | current | The delivery entry index of an ACL rule is a delivery record entry index used by software, which is meaningless to users. The index of is used in hwAclActiveTa… |
| 1.3.6.1.4.1.2011.5.1.1.9.1.2 | ColumnhwAclActiveIfIndex | accessible-for-notify | current | Indicates the port index or the slot index when the device delivers an ACL rule to a specified port or a specified slot. The index uniquely identifies a port o… |
| 1.3.6.1.4.1.2011.5.1.1.9.1.3 | ColumnhwAclActiveDirection | accessible-for-notify | current | Indicates the direction where an ACL rule takes effect when the device delivers an ACL rule to a specified port or a specified slot. Options: 1. invalid(0) -in… |
| 1.3.6.1.4.1.2011.5.1.1.9.1.4 | ColumnhwAclActiveUserAclNum | read-create | current | Describes the user-defined ACL rule group that are used when a user-defined ACL rule is delivered to a specified port or a specified slot and the inbound or ou… |
| 1.3.6.1.4.1.2011.5.1.1.9.1.5 | ColumnhwAclActiveUserAclSubitem | read-create | current | Describes the user-defined ACL rule that is used when a user-defined ACL rule is delivered to a specified port or a specified slot and the inbound or outbound … |
| 1.3.6.1.4.1.2011.5.1.1.9.1.6 | ColumnhwAclActiveIpAclNum | read-create | current | Describes the basic or advanced ACL rule group that are used when an ACL rule is delivered to a specified port or a specified slot and the inbound or outbound … |
| 1.3.6.1.4.1.2011.5.1.1.9.1.7 | ColumnhwAclActiveIpAclSubitem | read-create | current | Describes the basic or advanced ACL rule that is used when an ACL rule is delivered to a specified port or a specified slot and the inbound or outbound packets… |
| 1.3.6.1.4.1.2011.5.1.1.9.1.8 | ColumnhwAclActiveLinkAclNum | read-create | current | Describes the L2 ACL rule group that are used when an L2 ACL rule is delivered to a specified port or a specified slot and the inbound or outbound packets are … |
| 1.3.6.1.4.1.2011.5.1.1.9.1.9 | ColumnhwAclActiveLinkAclSubitem | read-create | current | Describes the L2 ACL rule that is used when an L2 ACL rule is delivered to a specified port or a specified slot and the inbound or outbound packets are filtere… |
| 1.3.6.1.4.1.2011.5.1.1.9.1.10 | ColumnhwAclActiveRuntime | read-only | current | Describes whether the ACL rule delivered to a specified port or a specified slot takes effect. Options: 1. true(1) -indicates that the ACL rule delivered to a … |
| 1.3.6.1.4.1.2011.5.1.1.9.1.11 | ColumnhwAclActiveRowStatus | read-create | current | Indicates the row status. It is used for delivering an ACL rule to a specified port or a specified slot and deleting the delivered ACL rule in a port or a slot… |
| 1.3.6.1.4.1.2011.5.1.1.9.1.12 | ColumnhwAclActiveIpv6AclNum | read-create | current | Describes the basic or advanced ACLv6 rule group that are used when an ACLv6 rule is delivered to a specified port or a specified slot and the inbound or outbo… |
| 1.3.6.1.4.1.2011.5.1.1.9.1.13 | ColumnhwAclActiveIpv6AclSubitem | read-create | current | Describes the basic or advanced ACLv6 rule that is used when an ACLv6 rule is delivered to a specified port or a specified slot and the inbound or outbound pac… |
| 1.3.6.1.4.1.2011.5.1.2 | NodehwAclTraps | |||
| 1.3.6.1.4.1.2011.5.1.2.1 | NodehwAclCommonTraps | |||
| 1.3.6.1.4.1.2011.5.1.2.1.0 | NodehwAclCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.1.2.1.0.1 | NotificationhwAclAddBasicAclTrap | current | The hwAclAddBasicAclTrap will be sent when the basic acl is added. | |
| 1.3.6.1.4.1.2011.5.1.2.1.0.2 | NotificationhwAclDeleteBasicAclTrap | current | The hwAclDeleteBasicAclTrap will be sent when the basic acl is deleted. | |
| 1.3.6.1.4.1.2011.5.1.2.1.0.3 | NotificationhwAclAddAdvancedAclTrap | current | The hwAclAddAdvancedAclTrap will be sent when the advanced acl is added. | |
| 1.3.6.1.4.1.2011.5.1.2.1.0.4 | NotificationhwAclDeleteAdvancedAclTrap | current | The hwAclDeleteAdvancedAclTrap will be sent when the advanced acl is deleted. | |
| 1.3.6.1.4.1.2011.5.1.2.1.0.5 | NotificationhwAclAddLinkAclTrap | current | The hwAclAddLinkAclTrap will be sent when the link acl is added. | |
| 1.3.6.1.4.1.2011.5.1.2.1.0.6 | NotificationhwAclDeleteLinkAclTrap | current | The hwAclDeleteLinkAclTrap will be sent when the link acl is deleted. | |
| 1.3.6.1.4.1.2011.5.1.2.1.0.7 | NotificationhwAclAddUserAclTrap | current | The hwAclAddUserAclTrap will be sent when the user acl is added. | |
| 1.3.6.1.4.1.2011.5.1.2.1.0.8 | NotificationhwAclDeleteUserAclTrap | current | The hwAclDeleteUserAclTrap will be sent when the user acl is deleted. | |
| 1.3.6.1.4.1.2011.5.1.2.1.0.9 | NotificationhwAclActiveAclTrap | current | The hwAclActiveAclTrap will be sent when the acl is activated. | |
| 1.3.6.1.4.1.2011.5.1.2.1.0.10 | NotificationhwAclDeactiveAclTrap | current | The hwAclDeactiveAclTrap will be sent when the user acl is deactivated. | |
| 1.3.6.1.4.1.2011.5.1.2.2 | NodehwAclAlarmTraps |