HUAWEI-DSLAM-VPLS-MIB
109 objects
HUAWEI VPLS management MIB for access network device.
Imported Objects
| HUAWEI-MIB | huaweiMgmt hwMpls |
| HUAWEI-PW-TC-MIB | PwVcType |
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddressType |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.115 | IdentityhwDslamVplsMib | HUAWEI VPLS management MIB for access network device. | ||
| 1.3.6.1.4.1.2011.5.115.1 | NodehwVplsObjects | |||
| 1.3.6.1.4.1.2011.5.115.1.1 | TablehwVplsTable | not-accessible | current | This table specifies the information for VSI. The index of this table is hwVplsVsiName. |
| 1.3.6.1.4.1.2011.5.115.1.1.1 | RowhwVplsEntry | not-accessible | current | This table specifies the information for VSI. The index of this entry is hwVplsVsiName. |
| 1.3.6.1.4.1.2011.5.115.1.1.1.1 | ColumnhwVplsVsiName | accessible-for-notify | current | This object indicates the VSI's name. VSI name is a string of 1-15 characters. There are all together 63 valid characters for the name. These characters includ… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.2 | ColumnhwVplsPwSignal | read-create | current | This object indicates the signal type. If the signal type is LDP, VSI-ID must be designated. After the signal type is configured, the configuration cannot be m… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.3 | ColumnhwVplsVsiID | read-create | current | This object indicates the VSI ID. The default value is 0, it means VSI ID is not configured. After the VSI ID is configured, the configuration cannot be modifi… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.4 | ColumnhwVplsVsiEncapType | read-create | current | This object indicates the VSI's encapsulation type. Options: 1. tagged(4) -indicates VSI's encapsulation type is tagged 2. raw(5) -indicates VSI's encapsulatio… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.5 | ColumnhwVplsAdminStatus | read-create | current | VSI's admin status. Options: 1. up(1) -indicates VSI's status up 2. down(2) -indicates VSI's status down |
| 1.3.6.1.4.1.2011.5.115.1.1.1.6 | ColumnhwVplsVsiState | read-only | current | This object indicates the VSI's run state. Options: 1. up(1) -indicates VSI's state is up 2. down(2) -indicates VSI's state is down 3. admindown(3) -indicates … |
| 1.3.6.1.4.1.2011.5.115.1.1.1.7 | ColumnhwVplsDescription | read-create | current | This object indicates the description information. |
| 1.3.6.1.4.1.2011.5.115.1.1.1.8 | ColumnhwVplsMtu | read-create | current | This object indicates the VPLS's MTU. |
| 1.3.6.1.4.1.2011.5.115.1.1.1.9 | ColumnhwVplsAcIsolateFlag | read-create | current | This object indicates whether the AC and Spoke-PW in the VSI is isolated Options: 1. enable(1) -indicates the AC and Spoke-PW in the VSI is isolated 2. disable… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.10 | ColumnhwVplsIgnoreAcState | read-create | current | This object indicates the enable sign of the ignorer of AC state. Options: 1. enable(1) -indicates that the ignore AC state function is enabled 2. disable(2) -… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.11 | ColumnhwVplsFlowLabel | read-create | current | Indicates the stream label classification rule in the transmit direction. Options: 1. sip(0) -Sets the stream label classification rule based on the source IP … |
| 1.3.6.1.4.1.2011.5.115.1.1.1.12 | ColumnhwVplsFlowLabelCapabilities | read-create | current | Indicates the VSI's flow label capability. Options: 1. receive(0) -indicates the flow label capability in the receive direction is enabled 2. transmit(1) -indi… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.13 | ColumnhwVplsControlWord | read-create | current | Defines if the control word will be sent with each packet by the local node. Some PW types mandate the use of a control word, and in such cases, the value conf… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.14 | ColumnhwVplsMacLimitAction | read-create | current | This object indicates the processing mode when the MAC learning table is full. Options: 1. discard(1) -indicates that the MAC limit action is discard 2. forwar… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.15 | ColumnhwVplsMacLimitAlarm | read-create | current | This object indicates whether send trap when the MAC learning table is full. Options: 1. enable(1) -indicates that the mac limit alarm function is enabled 2. d… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.16 | ColumnhwVplsMaxMacCount | read-create | current | This object indicates how many MAC address can be learned in the VSI. 0 indicates disable MAC learning. |
| 1.3.6.1.4.1.2011.5.115.1.1.1.17 | ColumnhwVplsTrafficSuppressUnicastUp | read-create | current | Indicates the upstream unknown unicast traffic suppression of VSI. 13 indicates full-suppression of traffic, and 0 indicates no traffic suppression. The suppre… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.18 | ColumnhwVplsTrafficSuppressUnicastDown | read-create | current | Indicates the downstream unknown unicast traffic suppression of VSI. 13 indicates full-suppression of traffic, and 0 indicates no traffic suppression. The supp… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.19 | ColumnhwVplsTrafficSuppressMulticastUp | read-create | current | Indicates the upstream unknown multicast traffic suppression of VSI. 13 indicates full-suppression of traffic, and 0 indicates no traffic suppression. The supp… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.20 | ColumnhwVplsTrafficSuppressMulticastDown | read-create | current | Indicates the downstream unknown multicast traffic suppression of VSI. 13 indicates full-suppression of traffic, and 0 indicates no traffic suppression. The su… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.21 | ColumnhwVplsTrafficSuppressBroadcastUp | read-create | current | Indicates the upstream broadcast traffic suppression of VSI. 13 indicates full-suppression of traffic, and 0 indicates no traffic suppression. The suppression … |
| 1.3.6.1.4.1.2011.5.115.1.1.1.22 | ColumnhwVplsTrafficSuppressBroadcastDown | read-create | current | Indicates the downstream broadcast traffic suppression of VSI. 13 indicates full-suppression of traffic, and 0 indicates no traffic suppression. The suppressio… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.23 | ColumnhwVplsPriMappingProfileName | read-create | current | QoS priority mapping profile name for VSI, a string of 1-32 characters. There are all together 92 valid characters for the name. These characters include the f… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.24 | ColumnhwVplsStatisticReset | read-write | current | Clear the traffic statistics of all PW and AC for this VSI. Options: 1. reset(1) -clear the traffic statistics of all PW and AC for this VSI |
| 1.3.6.1.4.1.2011.5.115.1.1.1.25 | ColumnhwVplsRowStatus | read-create | current | For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options:… |
| 1.3.6.1.4.1.2011.5.115.1.1.1.26 | ColumnhwVplsTnlPolicy | read-create | current | Used to configure the tunnel policy used by the VSI. |
| 1.3.6.1.4.1.2011.5.115.1.2 | TablehwVplsPwTable | not-accessible | current | This table specifies the information for VPLS PW. The index of this table is pwIndex. |
| 1.3.6.1.4.1.2011.5.115.1.2.1 | RowhwVplsPwEntry | not-accessible | current | This table specifies the information for VPLS PW. The index of this entry is pwIndex. |
| 1.3.6.1.4.1.2011.5.115.1.2.1.1 | ColumnhwVplsPwMaxMacCount | read-write | current | This object indicates how many MAC address can be learned in the PW. 0 indicates disable MAC learning. |
| 1.3.6.1.4.1.2011.5.115.1.2.1.2 | ColumnhwVplsPwBindType | read-write | current | This object indicates the type of PW. Options: 1. mesh(1) -indicates the bind type of the PW is mesh 2. spoken(2) -indicates the bind type of the PW is spoken |
| 1.3.6.1.4.1.2011.5.115.1.2.1.3 | ColumnhwVplsPwProtectGroupName | read-only | current | This object indicates the VPLS protect group name. VPLS protect group name is a string of 1-15 characters. There are all together 63 valid characters for the n… |
| 1.3.6.1.4.1.2011.5.115.1.2.1.4 | ColumnhwVplsPwProtectPreference | read-only | current | This object indicates the preference of PW in a VPLS PW protect group. Options: 1. primary(1) -indicates the primary member of the PW protect group 2. secondar… |
| 1.3.6.1.4.1.2011.5.115.1.2.1.5 | ColumnhwVplsPwProtectActiveState | read-only | current | This object indicates the active state of PW in a VPLS PW protect group. Options: 1. down(1) -indicates that the member of the PW protect group is down 2. acti… |
| 1.3.6.1.4.1.2011.5.115.1.3 | TablehwVplsPwBindTable | not-accessible | current | This table specifies the information for VPLS PW binding. The indexes of this table are hwVplsVsiName and pwIndex. |
| 1.3.6.1.4.1.2011.5.115.1.3.1 | RowhwVplsPwBindEntry | not-accessible | current | This table specifies the information for VPLS PW binding. The indexes of this entry are hwVplsVsiName and pwIndex. |
| 1.3.6.1.4.1.2011.5.115.1.3.1.1 | ColumnhwVplsPwBindRowStatus | read-create | current | For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options:… |
| 1.3.6.1.4.1.2011.5.115.1.4 | TablehwVplsAcTable | not-accessible | current | This table specifies the information for VPLS AC. The indexes of this table are hwVplsVsiName and hwVplsAcIndex. |
| 1.3.6.1.4.1.2011.5.115.1.4.1 | RowhwVplsAcEntry | not-accessible | current | This table specifies the information for VPLS AC. The indexes of this entry are hwVplsVsiName and hwVplsAcIndex. |
| 1.3.6.1.4.1.2011.5.115.1.4.1.1 | ColumnhwVplsAcIndex | not-accessible | current | AC index of VPLS AC. For VLAN type AC, VLAN ID range is 2-4093. |
| 1.3.6.1.4.1.2011.5.115.1.4.1.2 | ColumnhwVplsAcState | read-only | current | This object indicates state of the AC. Options: 1. up(1) -indicates switch AC's state is up 2. down(2) -indicates switch AC's state is down |
| 1.3.6.1.4.1.2011.5.115.1.4.1.3 | ColumnhwVplsAcMaxMacCount | read-create | current | This object indicates how many MAC address can be learned in the AC. 0 indicates disable MAC learning. |
| 1.3.6.1.4.1.2011.5.115.1.4.1.4 | ColumnhwVplsAcStatisticSwitch | read-create | current | Used to enable or disable the traffic statistic function of AC. Options: 1. enable(1) -indicates that the traffic statistic function is enabled 2. disable(2) -… |
| 1.3.6.1.4.1.2011.5.115.1.4.1.5 | ColumnhwVplsAcRowStatus | read-create | current | For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options:… |
| 1.3.6.1.4.1.2011.5.115.1.5 | TablehwVplsProtectGroupTable | not-accessible | current | This table specifies the information for VPLS protect group. The indexes of this table are hwVplsVsiName and hwVplsProtectGroupName. |
| 1.3.6.1.4.1.2011.5.115.1.5.1 | RowhwVplsProtectGroupEntry | not-accessible | current | This table specifies the information for VPLS protect group. The indexes of this entry are hwVplsVsiName and hwVplsProtectGroupName. |
| 1.3.6.1.4.1.2011.5.115.1.5.1.1 | ColumnhwVplsProtectGroupName | not-accessible | current | This object indicates the VPLS protect group name. VPLS protect group name is a string of 1-15 characters. There are all together 63 valid characters for the n… |
| 1.3.6.1.4.1.2011.5.115.1.5.1.2 | ColumnhwVplsProtectGroupProtectMode | read-create | current | Indicates the mode of the VPLS redundancy. Options: 1. master(1) -indicates that the VPLS redundancy mode is master 2. independent(2) -indicates that the VPLS … |
| 1.3.6.1.4.1.2011.5.115.1.5.1.3 | ColumnhwVplsProtectGroupReroutePolicy | read-create | current | This object indicates reroute delay policy of VPLS. Options: 1. revertive(1) -indicates that automatic recovery is allowed 2. nonRevertive(2) -indicates that t… |
| 1.3.6.1.4.1.2011.5.115.1.5.1.4 | ColumnhwVplsProtectGroupRerouteDelay | read-create | current | Indicates the recover time. Range: 0,10-600 Unit: second |
| 1.3.6.1.4.1.2011.5.115.1.5.1.5 | ColumnhwVplsProtectGroupStreamDualReceiving | read-create | current | This object indicates the receive mode of VPLS. Options: 1. enable(1) -indicates that the stream receiving mode of the VPLS redundancy is dual 2. disable(2) -i… |
| 1.3.6.1.4.1.2011.5.115.1.5.1.6 | ColumnhwVplsProtectGroupSwitch | read-write | current | Used to switch VPLS to primary PW or secondary PW. Options: 1. toPrimaryPW(1) -indicates switch from secondary PW to primary PW 2. toSecondaryPW(2) -indicates … |
| 1.3.6.1.4.1.2011.5.115.1.5.1.7 | ColumnhwVplsProtectGroupPrimaryPwIndex | read-write | current | The value that represents the corresponding primary PW in the pwTable. |
| 1.3.6.1.4.1.2011.5.115.1.5.1.8 | ColumnhwVplsProtectGroupSecondaryPwIndex | read-write | current | The value that represents the corresponding secondary PW in the pwTable. |
| 1.3.6.1.4.1.2011.5.115.1.5.1.9 | ColumnhwVplsProtectGroupRowStatus | read-create | current | For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options:… |
| 1.3.6.1.4.1.2011.5.115.1.6 | TablehwVplsExtAcStatisticTable | not-accessible | current | This table is used to query or reset the traffic statistics of VPLS AC. The indexes of this table are hwVplsVsiName and hwVplsAcIndex. |
| 1.3.6.1.4.1.2011.5.115.1.6.1 | RowhwVplsExtAcStatisticEntry | not-accessible | current | This table is used to query or reset the traffic statistics of VPLS AC. The indexes of this entry are hwVplsVsiName and hwVplsAcIndex. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.1 | ColumnhwVplsExtAcStatisticUpstreamOctectsP0 | read-only | current | The total number of upstream octets with priority equal to 0. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.2 | ColumnhwVplsExtAcStatisticUpstreamPacketsP0 | read-only | current | The total number of upstream packets with priority equal to 0. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.3 | ColumnhwVplsExtAcStatisticUpstreamOctectsP1 | read-only | current | The total number of upstream octets with priority equal to 1. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.4 | ColumnhwVplsExtAcStatisticUpstreamPacketsP1 | read-only | current | The total number of upstream packets with priority equal to 1. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.5 | ColumnhwVplsExtAcStatisticUpstreamOctectsP2 | read-only | current | The total number of upstream octets with priority equal to 2. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.6 | ColumnhwVplsExtAcStatisticUpstreamPacketsP2 | read-only | current | The total number of upstream packets with priority equal to 2. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.7 | ColumnhwVplsExtAcStatisticUpstreamOctectsP3 | read-only | current | The total number of upstream octets with priority equal to 3. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.8 | ColumnhwVplsExtAcStatisticUpstreamPacketsP3 | read-only | current | The total number of upstream packets with priority equal to 3. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.9 | ColumnhwVplsExtAcStatisticUpstreamOctectsP4 | read-only | current | The total number of upstream octets with priority equal to 4. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.10 | ColumnhwVplsExtAcStatisticUpstreamPacketsP4 | read-only | current | The total number of upstream packets with priority equal to 4. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.11 | ColumnhwVplsExtAcStatisticUpstreamOctectsP5 | read-only | current | The total number of upstream octets with priority equal to 5. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.12 | ColumnhwVplsExtAcStatisticUpstreamPacketsP5 | read-only | current | The total number of upstream packets with priority equal to 5. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.13 | ColumnhwVplsExtAcStatisticUpstreamOctectsP6 | read-only | current | The total number of upstream octets with priority equal to 6. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.14 | ColumnhwVplsExtAcStatisticUpstreamPacketsP6 | read-only | current | The total number of upstream packets with priority equal to 6. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.15 | ColumnhwVplsExtAcStatisticUpstreamOctectsP7 | read-only | current | The total number of upstream octets with priority equal to 7. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.16 | ColumnhwVplsExtAcStatisticUpstreamPacketsP7 | read-only | current | The total number of upstream packets with priority equal to 7. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.17 | ColumnhwVplsExtAcStatisticDownstreamOctectsP0 | read-only | current | The total number of downstream octets with priority equal to 0. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.18 | ColumnhwVplsExtAcStatisticDownstreamPacketsP0 | read-only | current | The total number of downstream packets with priority equal to 0. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.19 | ColumnhwVplsExtAcStatisticDownstreamOctectsP1 | read-only | current | The total number of downstream octets with priority equal to 1. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.20 | ColumnhwVplsExtAcStatisticDownstreamPacketsP1 | read-only | current | The total number of downstream packets with priority equal to 1. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.21 | ColumnhwVplsExtAcStatisticDownstreamOctectsP2 | read-only | current | The total number of downstream octets with priority equal to 2. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.22 | ColumnhwVplsExtAcStatisticDownstreamPacketsP2 | read-only | current | The total number of downstream packets with priority equal to 2. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.23 | ColumnhwVplsExtAcStatisticDownstreamOctectsP3 | read-only | current | The total number of downstream octets with priority equal to 3. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.24 | ColumnhwVplsExtAcStatisticDownstreamPacketsP3 | read-only | current | The total number of downstream packets with priority equal to 3. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.25 | ColumnhwVplsExtAcStatisticDownstreamOctectsP4 | read-only | current | The total number of downstream octets with priority equal to 4. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.26 | ColumnhwVplsExtAcStatisticDownstreamPacketsP4 | read-only | current | The total number of downstream packets with priority equal to 4. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.27 | ColumnhwVplsExtAcStatisticDownstreamOctectsP5 | read-only | current | The total number of downstream octets with priority equal to 5. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.28 | ColumnhwVplsExtAcStatisticDownstreamPacketsP5 | read-only | current | The total number of downstream packets with priority equal to 5. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.29 | ColumnhwVplsExtAcStatisticDownstreamOctectsP6 | read-only | current | The total number of downstream octets with priority equal to 6. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.30 | ColumnhwVplsExtAcStatisticDownstreamPacketsP6 | read-only | current | The total number of downstream packets with priority equal to 6. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.31 | ColumnhwVplsExtAcStatisticDownstreamOctectsP7 | read-only | current | The total number of downstream octets with priority equal to 7. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.32 | ColumnhwVplsExtAcStatisticDownstreamPacketsP7 | read-only | current | The total number of downstream packets with priority equal to 7. |
| 1.3.6.1.4.1.2011.5.115.1.6.1.33 | ColumnhwVplsExtAcStatisticReset | read-write | current | Reset the traffic statistics of this VPLS AC. Options: 1. reset(1) -reset the traffic statistics of this VPLS AC |
| 1.3.6.1.4.1.2011.5.115.1.7 | TablehwSwitchPwBindTable | not-accessible | current | This table specifies the information for switch PW. The index of this table is pwIndex. |
| 1.3.6.1.4.1.2011.5.115.1.7.1 | RowhwSwitchPwBindEntry | not-accessible | current | This table specifies the information for switch PW. The index of this entry is pwIndex. |
| 1.3.6.1.4.1.2011.5.115.1.7.1.1 | ColumnhwSwitchPwAttachedPwindex | read-only | current | This object indicates the pwindex of attached PW |
| 1.3.6.1.4.1.2011.5.115.1.7.1.2 | ColumnhwSwitchPwState | read-only | current | This object indicates state of switch PW. Options: 1. up(1) -indicates switch PW's state is up 2. down(2) -indicates switch PW's state is down 3. admindown(3) … |
| 1.3.6.1.4.1.2011.5.115.1.7.1.3 | ColumnhwSwitchPwBindRowStatus | read-create | current | For creating and modifying this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state. Options:… |
| 1.3.6.1.4.1.2011.5.115.2 | NodehwVplsTraps | |||
| 1.3.6.1.4.1.2011.5.115.2.1 | NodehwVplsTrapVbOids | |||
| 1.3.6.1.4.1.2011.5.115.2.2 | NodehwVplsCommonTraps | |||
| 1.3.6.1.4.1.2011.5.115.2.3 | NodehwVplsAlarmTraps | |||
| 1.3.6.1.4.1.2011.5.115.2.3.1 | NodehwVplsVsiTraps | |||
| 1.3.6.1.4.1.2011.5.115.2.3.1.1 | NodehwVplsVsiTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.115.2.3.1.1.1 | NotificationhwVplsVsiUpTrap | current | This notification is generated in these following cases: (1) The case that at least two ACs or spoke PWs are up occurs when the AC status is not ignored and th… | |
| 1.3.6.1.4.1.2011.5.115.2.3.1.1.2 | NotificationhwVplsVsiDownTrap | current | This notification is generated in these following cases: (1) The case that at least two ACs or spoke PWs are up does not occur when the AC status is not ignore… | |
| 1.3.6.1.4.1.2011.5.115.2.3.1.1.3 | NotificationhwVplsMacFullAppearTrap | current | This notification is generated in these following cases: (1) The number of learnable MAC addresses of this VSI reaches the limit (2) The number of learnable MA… | |
| 1.3.6.1.4.1.2011.5.115.2.3.1.1.4 | NotificationhwVplsMacFullDisappearTrap | current | This notification is generated in these following cases: (1) The number of learnable MAC addresses of this VSI does not reach the limit (2) The number of learn… | |
| 1.3.6.1.4.1.2011.5.115.4 | NodehwVplsConformance |