HUAWEI-E-TRUNK-MIB
64 objects
Add hwETrunkExpectStateChange and hwETrunkExpectStateResume.
Imported Objects
| HUAWEI-MIB | huaweiMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString PhysAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25 | NodehwDatacomm | |||
| 1.3.6.1.4.1.2011.5.25.178 | IdentityhwETrunkMIB | Add hwETrunkExpectStateChange and hwETrunkExpectStateResume. | ||
| 1.3.6.1.4.1.2011.5.25.178.1 | NodehwETrunkObjects | |||
| 1.3.6.1.4.1.2011.5.25.178.1.1 | TablehwETrunkTable | not-accessible | current | The E-Trunk table. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1 | RowhwETrunkEntry | not-accessible | current | E-Trunk entry. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.1 | ColumnhwETrunkId | not-accessible | current | The index of the E-Trunk. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.2 | ColumnhwETrunkSystemId | read-only | current | The system ID of the E-Trunk. It is a physical address. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.3 | ColumnhwETrunkPri | read-create | current | The priority of the E-Trunk. The default value is 100. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.4 | ColumnhwETrunkStatus | read-only | current | The status of the E-Trunk. 1:initialize. 2:backup. 3:master. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.5 | ColumnhwETrunkStatusReason | read-only | current | The reason for the E-Trunk being in the current status. pri(1):Priority calculation. timeout(2):The receiving timer timed out. bfdDown(3):BFD detected the cont… |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.6 | ColumnhwETrunkPeerIpAddr | read-create | current | The peer IP address of the E-Trunk. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.7 | ColumnhwETrunkSourceIpAddr | read-create | current | The source IP address of the E-Trunk. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.8 | ColumnhwETrunkReceiveFailTimeMultiple | read-create | current | The detection time multiplier for failure detection. It is the multiple of the sending period. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.9 | ColumnhwETrunkSendPeriod | read-create | current | The period for sending packets of the E-Trunk. The unit is 100ms. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.10 | ColumnhwETrunkPacketReceive | read-only | current | The number of received packets. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.11 | ColumnhwETrunkPacketSend | read-only | current | The number of sent packets. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.12 | ColumnhwETrunkPacketRecDrop | read-only | current | The number of the dropped packets when the packets are received. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.13 | ColumnhwETrunkPacketSndDrop | read-only | current | The number of the dropped packets when the packets are sent. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.14 | ColumnhwETrunkPeerSystemId | read-only | current | The system ID of the peer E-Trunk. It is a physical address. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.15 | ColumnhwETrunkPeerPri | read-only | current | The priority of the peer E-Trunk. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.16 | ColumnhwETrunkPeerReceiveFailTime | read-only | current | The failure time for the peer E-Trunk to receive packets. The unit is 100ms. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.17 | ColumnhwETrunkSecurityKeyType | read-create | current | The type of the security key. 1:The simple encrypt type. 2:The cipher encrypt type. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.18 | ColumnhwETrunkSecurityKey | read-create | current | This object can be set to a simple password with a string of 0 to 255 characters or a encrypted password with a string less than 392 characters. For security p… |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.19 | ColumnhwETrunkBfdSessId | read-create | current | The ID of a BFD session which is bound to the E-Trunk. When the status of the BFD session is changed, the status of the E-Trunk is also changed with BFD's stat… |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.20 | ColumnhwETrunkResetCounter | read-create | current | Reset hwETrunkPacketReceive,hwETrunkPacketSend,hwETrunkPacketRecDrop,hwETrunkPacketSndDrop. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.21 | ColumnhwETrunkRevertTime | read-create | current | The delay time to revert. The unit is second. The default is 120. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.22 | ColumnhwETrunkBfdSessName | read-create | current | The name of a BFD session which is bound to the E-Trunk. And BFD session name is composed of octet string which is 1 to 15 octet and can't contain space within… |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.23 | ColumnhwETrunkDescription | read-create | current | The description of the E-Trunk. The default is NULL |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.24 | ColumnhwETrunkAutoBFDEnable | read-create | current | The object indicates whether the E-trunk enable auto BFD function. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.25 | ColumnhwETrunkAutoBFDTrackIfIndex | read-create | current | The object indicates the index of an interface which is tracked by the E-Trunk auto BFD session. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.26 | ColumnhwETrunkAutoBFDTxInterval | read-create | current | The sending interval of E-Trunk auto BFD session in milliseconds. The default is 10. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.27 | ColumnhwETrunkAutoBFDRxInterval | read-create | current | The receiving interval of E-Trunk auto BFD session in milliseconds. The default is 10. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.28 | ColumnhwETrunkAutoBFDDetectMultiplier | read-create | current | The detect multiplier of E-Trunk auto BFD session. The default is 3. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.29 | ColumnhwETrunkExpectStatus | read-only | current | The expect status of the E-Trunk. 1:backup. 2:master. |
| 1.3.6.1.4.1.2011.5.25.178.1.1.1.50 | ColumnhwETrunkRowStatus | read-create | current | Current operation status of the row. It is used to manage the creation and deletion of conceptual rows. |
| 1.3.6.1.4.1.2011.5.25.178.1.2 | TablehwETrunkMemberTable | not-accessible | current | The member table of the E-Trunk. |
| 1.3.6.1.4.1.2011.5.25.178.1.2.1 | RowhwETrunkMemberEntry | not-accessible | current | Member Entry. |
| 1.3.6.1.4.1.2011.5.25.178.1.2.1.1 | ColumnhwETrunkMemberParentId | not-accessible | current | The ID of the E-Trunk to which the member belongs. |
| 1.3.6.1.4.1.2011.5.25.178.1.2.1.2 | ColumnhwETrunkMemberType | not-accessible | current | The type of the member. Now it is Eth-Trunk and Global-VE. 1:Eth-Trunk. 2:Global-VE. |
| 1.3.6.1.4.1.2011.5.25.178.1.2.1.3 | ColumnhwETrunkMemberId | not-accessible | current | The ID of the member. |
| 1.3.6.1.4.1.2011.5.25.178.1.2.1.4 | ColumnhwETrunkMemberStatus | read-only | current | The member status. 1:backup. 2:master. |
| 1.3.6.1.4.1.2011.5.25.178.1.2.1.5 | ColumnhwETrunkMemberStatusReason | read-only | current | The reason for the member being in the current status. forceBackup(1):The work mode of the member is force-backup. forceMaster(2):The work mode of the member i… |
| 1.3.6.1.4.1.2011.5.25.178.1.2.1.6 | ColumnhwETrunkMemberWorkMode | read-create | current | The work mode of the member. 1:auto. 2:forceBackup. 3:forceMaster. 4:activeActive. |
| 1.3.6.1.4.1.2011.5.25.178.1.2.1.7 | ColumnhwETrunkMemberPhyStatus | read-only | current | The physical status of the member. 1:up. 2:down. |
| 1.3.6.1.4.1.2011.5.25.178.1.2.1.8 | ColumnhwETrunkMemberRemoteId | read-create | current | Indicates the ID of a remote E-Trunk member. By default, the ID of a remote E-Trunk member is the same as the ID of the local E-Trunk member. When both ends ha… |
| 1.3.6.1.4.1.2011.5.25.178.1.2.1.50 | ColumnhwETrunkMemberRowStatus | read-create | current | Current operation status of the row. It is used to manage the creation and deletion of conceptual rows. |
| 1.3.6.1.4.1.2011.5.25.178.1.3 | TablehwETrunkBackupPortTable | not-accessible | current | The backup port table of the E-Trunk. |
| 1.3.6.1.4.1.2011.5.25.178.1.3.1 | RowhwETrunkBackupPortEntry | not-accessible | current | Backup Port Entry. |
| 1.3.6.1.4.1.2011.5.25.178.1.3.1.1 | ColumnhwETrunkBackupETrunkId | not-accessible | current | The index of the E-Trunk. |
| 1.3.6.1.4.1.2011.5.25.178.1.3.1.2 | ColumnhwETrunkBackupPortNum | read-create | current | The backup port number of the E-Trunk for RBS. |
| 1.3.6.1.4.1.2011.5.25.178.1.3.1.3 | ColumnhwETrunkBackupPortRowStatus | read-create | current | Current operation status of the row. It is used to manage the creation and deletion of conceptual rows. |
| 1.3.6.1.4.1.2011.5.25.178.2 | NodehwETrunkTraps | |||
| 1.3.6.1.4.1.2011.5.25.178.2.1 | NotificationhwETrunkStatusChange | current | The trap is generated when the status of the E-Trunk is changed or the status reason of the E-Trunk is changed. | |
| 1.3.6.1.4.1.2011.5.25.178.2.2 | NotificationhwETrunkMemberStatusChange | current | The trap is generated when the status of the memeber is changed or the status reason of the memeber is changed. | |
| 1.3.6.1.4.1.2011.5.25.178.2.3 | NotificationhwETrunkExpectStateChange | current | The trap is generated when the status of the E-Trunk is inconsistant with expected state . | |
| 1.3.6.1.4.1.2011.5.25.178.2.4 | NotificationhwETrunkExpectStateResume | current | The expected state trap of E-Trunk resumed. | |
| 1.3.6.1.4.1.2011.5.25.178.3 | NodehwETrunkConformance | |||
| 1.3.6.1.4.1.2011.5.25.178.3.1 | NodehwETrunkCompliances | |||
| 1.3.6.1.4.1.2011.5.25.178.3.1.1 | CompliancehwETrunkFullCompliance | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.178.3.2 | NodehwETrunkGroups | |||
| 1.3.6.1.4.1.2011.5.25.178.3.2.1 | GrouphwETrunkGroup | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.178.3.2.2 | GrouphwETrunkMemberGroup | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.178.3.2.3 | GrouphwETrunkNotificationGroup | current | Description. | |
| 1.3.6.1.4.1.2011.5.25.178.3.2.4 | GrouphwETrunkBackupPortGroup | current | The backup port infomation of the E-Trunk. |