HUAWEI-ERPS-MIB
83 objects
The private mib file includes the general extent information of the device.hwDatacomm(25).hwErpsMIB.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | ifName InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.256 | IdentityhwErpsMIB | The private mib file includes the general extent information of the device.hwDatacomm(25).hwErpsMIB. | ||
| 1.3.6.1.4.1.2011.5.25.256.1 | NodehwErpsObjects | |||
| 1.3.6.1.4.1.2011.5.25.256.1.1 | ScalarhwErpsGlobalResetRapsPktCnt | read-write | current | Reset the RAPS packets counter of all running ERPS ports. The value is unused(65535) when it is read. And it must be clear(1) when it is set. |
| 1.3.6.1.4.1.2011.5.25.256.1.2 | TablehwErpsRingConfigTable | not-accessible | current | The table includes the configurtion of ERPS rings. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1 | RowhwErpsRingConfigEntry | not-accessible | current | The table includes the configurtion of ERPS rings. The index of the table is ERPS ring id. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.1 | ColumnhwConfigRingId | accessible-for-notify | current | ERPS ring Identifier. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.2 | ColumnhwConfigRingRowStatus | read-create | current | Operation of CreateAndGo can be used to create a new ERPS ring, and operation of Destroy be used to destroy an existent ERPS ring. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.3 | ColumnhwConfigDescription | read-create | current | A textual description of the ERPS ring. It is mandatory that this only contain no more than 80 printable ASCII characters. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.4 | ColumnhwConfigControlVlanId | read-create | current | The control VLAN identifier of the ERPS ring. If the value of the object is set 0, the operation is to delete configuration. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.5 | ColumnhwConfigProtectedInstanceList | read-create | current | The protected instance list of the ERPS ring. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.6 | ColumnhwConfigWtrTimerSettingValue | read-create | current | The setting value of the ring's wait to restore timer. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.7 | ColumnhwConfigGuardTimerSettingValue | read-create | current | The setting value of the ring's guard timer. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.8 | ColumnhwConfigHoldoffTimerSettingValue | read-create | current | The setting value of the ring's hold-off timer. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.9 | ColumnhwConfigResetRapsPktCnt | read-create | current | Reset the RAPS packets counter of the ERPS ring's ports. The value is unused(65535) when it is read. And it must be clear(1) when it is set. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.10 | ColumnhwConfigRapsMel | read-create | current | The MEL is the maintenance entity group(MEG) level providing a communication channel for the ring RAPS information. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.11 | ColumnhwConfigVersion | read-create | current | Set protocol version of the ERPS ring. The default version is v1. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.12 | ColumnhwConfigRevertiveMode | read-create | current | Set revertive mode of the ERPS ring. The default mode is revertive. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.13 | ColumnhwConfigRingRole | read-create | current | Specify the ERPS ring as sub-ring. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.14 | ColumnhwConfigRapsChannelMode | read-create | current | Set RAPS channel of the sub-ring. By default, non-virtual channel is used. unused(65535) is displayed when it is read if the ring is major ring. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.15 | ColumnhwConfigTcNotifyErpsRing | read-create | current | Set the list of ERPS rings that will be notified when topology changes. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.16 | ColumnhwConfigTcProtectionInterval | read-create | current | Time interval for topology change protection, in seconds. The default value is 2. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.17 | ColumnhwConfigTcProtectionThreshold | read-create | current | Threshold of topology change protection. The default value is 3. |
| 1.3.6.1.4.1.2011.5.25.256.1.2.1.18 | ColumnhwConfigProtectionSwitch | read-create | current | Cancel current configuration of the ERPS ring. The value is idle(65535) when it is read, and is clear(1) when the current configuration is canceled. |
| 1.3.6.1.4.1.2011.5.25.256.1.3 | TablehwErpsRingStatusTable | not-accessible | current | The table includes the status of ERPS rings. |
| 1.3.6.1.4.1.2011.5.25.256.1.3.1 | RowhwErpsRingStatusEntry | not-accessible | current | The table includes the status of ERPS rings. The index of the table is ERPS ring id. |
| 1.3.6.1.4.1.2011.5.25.256.1.3.1.1 | ColumnhwStatusWtrTimerRunningValue | read-only | current | The running value of the ring's wait to restore timer. |
| 1.3.6.1.4.1.2011.5.25.256.1.3.1.2 | ColumnhwStatusGuardTimerRunningValue | read-only | current | The running value of the ring's guard timer. |
| 1.3.6.1.4.1.2011.5.25.256.1.3.1.3 | ColumnhwStatusHoldoffTimerRunningValue | read-only | current | The running value of the ring's hold-off timer. |
| 1.3.6.1.4.1.2011.5.25.256.1.3.1.4 | ColumnhwStatusMachineState | read-only | current | The Finite-state machine's state of the ERPS ring. state value idle 1 protection 2 manualSwitch 3 forcedSwitch 4 pending 5 |
| 1.3.6.1.4.1.2011.5.25.256.1.3.1.5 | ColumnhwStatusTopoLastChangeTime | read-only | current | The time since last topology change of the ring. |
| 1.3.6.1.4.1.2011.5.25.256.1.3.1.6 | ColumnhwStatusWtbTimerRunningValue | read-only | current | The running value of the ring's wait to block timer. |
| 1.3.6.1.4.1.2011.5.25.256.1.4 | TablehwErpsPortConfigTable | not-accessible | current | The table includes the configuration of ERPS ports. |
| 1.3.6.1.4.1.2011.5.25.256.1.4.1 | RowhwErpsPortConfigEntry | not-accessible | current | The table includes the configuration of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identif… |
| 1.3.6.1.4.1.2011.5.25.256.1.4.1.1 | ColumnhwConfigPortType | not-accessible | current | The port type.Currently ERPS just supports ethernet port and the value is 1. |
| 1.3.6.1.4.1.2011.5.25.256.1.4.1.2 | ColumnhwConfigPortId1 | not-accessible | current | The port identifier1, when the hwConfigPortType is 1, the value of the object is the IfIndex of the port. |
| 1.3.6.1.4.1.2011.5.25.256.1.4.1.3 | ColumnhwConfigPortId2 | not-accessible | current | The port identifier2, Currently it is not used and only for extension, should be set 0. |
| 1.3.6.1.4.1.2011.5.25.256.1.4.1.4 | ColumnhwConfigPortId3 | not-accessible | current | The port identifier3, Currently it is not used and only for extension, should be set 0. |
| 1.3.6.1.4.1.2011.5.25.256.1.4.1.5 | ColumnhwConfigPortId4 | not-accessible | current | The port identifier4, Currently it is not used and only for extension, should be set 0. |
| 1.3.6.1.4.1.2011.5.25.256.1.4.1.6 | ColumnhwConfigPortRowStatus | read-create | current | Operation of CreateAndGo can be used to have a port join the ERPS ring. and operation of Destroy be used to have a port leave the ERPS ring. |
| 1.3.6.1.4.1.2011.5.25.256.1.4.1.7 | ColumnhwConfigPortConfigRole | read-create | current | The configued port role: role value common 0x10 rplOwner 0x21 rplNeighbour 0x22 |
| 1.3.6.1.4.1.2011.5.25.256.1.4.1.8 | ColumnhwConfigPortProtectionSwitch | read-create | current | Set the protection switch mode, including forced switch and manual switch. If no mode is set, idle(65535) is displayed. |
| 1.3.6.1.4.1.2011.5.25.256.1.5 | TablehwErpsPortStatusTable | not-accessible | current | The table includes the status of ERPS ports. |
| 1.3.6.1.4.1.2011.5.25.256.1.5.1 | RowhwErpsPortStatusEntry | not-accessible | current | The table includes the status of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier3, p… |
| 1.3.6.1.4.1.2011.5.25.256.1.5.1.1 | ColumnhwPortStatusActiveRole | read-only | current | The active port role: role value common 0x10 rplOwner 0x21 rplNeighbour 0x22 |
| 1.3.6.1.4.1.2011.5.25.256.1.5.1.2 | ColumnhwPortStatusSignalStatus | read-only | current | The signal status of the port: state value failed 1 nonFailed 2 |
| 1.3.6.1.4.1.2011.5.25.256.1.5.1.3 | ColumnhwPortStatusFwdStatus | read-only | current | The forwarding status of the port: state value discarding 1 forwarding 2 |
| 1.3.6.1.4.1.2011.5.25.256.1.6 | TablehwErpsPortStatisticsTable | not-accessible | current | The table includes the statistics of ERPS ports. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1 | RowhwErpsPortStatisticsEntry | not-accessible | current | The table includes the Statistics of ERPS ports. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port identifier… |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.1 | ColumnhwRxRapsSfPktCnt | read-only | current | The number of received RAPS SF packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.2 | ColumnhwTxRapsSfPktCnt | read-only | current | The number of transmitted RAPS SF packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.3 | ColumnhwRxRapsNrPktCnt | read-only | current | The number of received RAPS NR packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.4 | ColumnhwTxRapsNrPktCnt | read-only | current | The number of transmitted RAPS NR packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.5 | ColumnhwRxRapsNrRbPktCnt | read-only | current | The number of received RAPS NRRB packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.6 | ColumnhwTxRapsNrRbPktCnt | read-only | current | The number of transmitted RAPS NRRB packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.7 | ColumnhwRxRapsFsPktCnt | read-only | current | The number of received RAPS FS packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.8 | ColumnhwTxRapsFsPktCnt | read-only | current | The number of transmitted RAPS FS packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.9 | ColumnhwRxRapsMsPktCnt | read-only | current | The number of received RAPS MS packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.10 | ColumnhwTxRapsMsPktCnt | read-only | current | The number of transmitted RAPS MS packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.11 | ColumnhwRxRapsEventPktCnt | read-only | current | The number of received RAPS Event packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.6.1.12 | ColumnhwTxRapsEventPktCnt | read-only | current | The number of transmitted RAPS Event packets. |
| 1.3.6.1.4.1.2011.5.25.256.1.7 | TablehwErpsPortTrackTable | not-accessible | current | The table includes the information of ERPS ports track. |
| 1.3.6.1.4.1.2011.5.25.256.1.7.1 | RowhwErpsPortTrackEntry | not-accessible | current | The table includes the information of ERPS ports track. The index of the table is ERPS ring identifier, port type, port identifier1, port identifier2, port ide… |
| 1.3.6.1.4.1.2011.5.25.256.1.7.1.1 | ColumnhwErpsPortTrackProtocolType | not-accessible | current | The protocol type that ERPS port tracks. Currently ERPS port just supports tracking CFM. |
| 1.3.6.1.4.1.2011.5.25.256.1.7.1.2 | ColumnhwErpsPortTrackRowStatus | read-create | current | The CreateAndGo operation enables an ERPS port to track the protocol. The Destroy operation disables an ERPS port from tracking the protocol. |
| 1.3.6.1.4.1.2011.5.25.256.1.7.1.3 | ColumnhwErpsPortTrackCfmMdName | read-create | current | The name of maintenance domain. |
| 1.3.6.1.4.1.2011.5.25.256.1.7.1.4 | ColumnhwErpsPortTrackCfmMaName | read-create | current | The name of maintenance association. |
| 1.3.6.1.4.1.2011.5.25.256.1.7.1.5 | ColumnhwErpsPortTrackCfmMepId | read-create | current | MEP ID. |
| 1.3.6.1.4.1.2011.5.25.256.1.7.1.6 | ColumnhwErpsPortTrackCfmRmepId | read-create | current | Remote MEP ID. |
| 1.3.6.1.4.1.2011.5.25.256.2 | NodehwErpsGroups | |||
| 1.3.6.1.4.1.2011.5.25.256.2.1 | GrouphwErpsGlobalInfoGroup | current | The group of global information. | |
| 1.3.6.1.4.1.2011.5.25.256.2.2 | GrouphwErpsRingConfigInfoGroup | current | The group of ring configuration. | |
| 1.3.6.1.4.1.2011.5.25.256.2.3 | GrouphwErpsRingStatusInfoGroup | current | The group of ring status. | |
| 1.3.6.1.4.1.2011.5.25.256.2.4 | GrouphwErpsPortConfigInfoGroup | current | The group of port configuration. | |
| 1.3.6.1.4.1.2011.5.25.256.2.5 | GrouphwErpsPortStatusInfoGroup | current | The group of port status. | |
| 1.3.6.1.4.1.2011.5.25.256.2.6 | GrouphwErpsPortStatisticsInfoGroup | current | The group of port information. | |
| 1.3.6.1.4.1.2011.5.25.256.2.7 | GrouphwErpsPortTrackInfoGroup | current | The group of ERPS port tracking information. | |
| 1.3.6.1.4.1.2011.5.25.256.2.8 | GrouphwErpsNotificationGroup | current | The notification group. | |
| 1.3.6.1.4.1.2011.5.25.256.3 | NodehwErpsConformance | |||
| 1.3.6.1.4.1.2011.5.25.256.3.1 | NodehwErpsCompliances | |||
| 1.3.6.1.4.1.2011.5.25.256.3.1.1 | CompliancehwErpsCompliance | current | The core compliance statement for all implementations. | |
| 1.3.6.1.4.1.2011.5.25.256.4 | NodehwErpsNotifications | |||
| 1.3.6.1.4.1.2011.5.25.256.4.1 | NotificationhwErpsFwStateForwarding | current | Trap message is generated by ERPS node when it detects that the state of ERPS port changes to forwarding. | |
| 1.3.6.1.4.1.2011.5.25.256.4.2 | NotificationhwErpsFwStateDiscarding | current | Trap message is generated by ERPS node when it detects that the state of ERPS port changes to discarding. |