HUAWEI-IMA-MIB
80 objects
The MIB is mainly used to configure Inverse Multiplexing for ATM (IMA) interfaces.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.176 | IdentityhwImaMIB | The MIB is mainly used to configure Inverse Multiplexing for ATM (IMA) interfaces. | ||
| 1.3.6.1.4.1.2011.5.25.176.1 | NodehwImaMibObjects | |||
| 1.3.6.1.4.1.2011.5.25.176.1.1 | TablehwImaGroupTable | not-accessible | current | The IMA Group Configuration table. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1 | RowhwImaGroupEntry | not-accessible | current | An entry in the IMA Group table. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.1 | ColumnhwImaGroupIfIndex | read-only | current | This object identifies the logical interface number ('ifIndex') assigned to this IMA group, and is used to identify corresponding rows in the Interfaces MIB. N… |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.2 | ColumnhwImaGroupNeState | read-only | current | The current operational state of the near-end IMA Group State Machine. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.3 | ColumnhwImaGroupFeState | read-only | current | The current operational state of the far-end IMA Group State Machine. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.4 | ColumnhwImaGroupSymmetry | read-only | current | Symmetry of the IMA group. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.5 | ColumnhwImaGroupMinNumTxLinks | read-create | current | Minimum number of transmit links required to be Active for the IMA group to be in the Operational state. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.6 | ColumnhwImaGroupMinNumRxLinks | read-create | current | Minimum number of receive links required to be Active for the IMA group to be in the Operational state. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.7 | ColumnhwImaGroupTxTimingRefLink | read-only | current | The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. The distinguished value of ze… |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.8 | ColumnhwImaGroupRxTimingRefLink | read-only | current | The ifIndex of the receive timing reference link to be used by near-end for IMA data cell clock recovery toward the ATM layer. The distinguished value of zero … |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.9 | ColumnhwImaGroupTxImaId | read-only | current | The IMA ID currently in use by the near-end IMA function. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.10 | ColumnhwImaGroupRxImaId | read-only | current | The IMA ID currently in use by the far-end IMA function. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.11 | ColumnhwImaGroupTxFrameLength | read-create | current | The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.12 | ColumnhwImaGroupRxFrameLength | read-only | current | Value of IMA frame length as received from remote IMA function. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.13 | ColumnhwImaGroupDiffDelayMax | read-create | current | The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.14 | ColumnhwImaGroupAlphaValue | read-only | current | This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA Hunt state from the IMA Sy… |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.15 | ColumnhwImaGroupBetaValue | read-only | current | This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA Hunt state from the IMA Syn… |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.16 | ColumnhwImaGroupGammaValue | read-only | current | This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA Sync state from the IMA PreS… |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.17 | ColumnhwImaGroupNumTxActLinks | read-only | current | The number of links which are configured to transmit and are currently Active in this IMA group. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.18 | ColumnhwImaGroupNumRxActLinks | read-only | current | The number of links which are configured to receive and are currently Active in this IMA group. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.19 | ColumnhwImaGroupTxOamLabelValue | read-only | current | IMA OAM Label value transmitted by the NE IMA unit. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.20 | ColumnhwImaGroupRxOamLabelValue | read-only | current | IMA OAM Label value transmitted by the FE IMA unit. The value 0 likely means that the IMA unit has not received an OAM Label from the FE IMA unit at this time. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.21 | ColumnhwImaGroupFirstLinkIfIndex | read-only | current | This object identifies the first link of this IMA Group. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.22 | ColumnhwImaGroupName | accessible-for-notify | current | The name of interface ImaGroup. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.23 | ColumnhwImaGroupTxClock | read-create | current | The clock mode to be used by the IMA group in the transmit direction. |
| 1.3.6.1.4.1.2011.5.25.176.1.1.1.24 | ColumnhwImaGroupRxClock | read-only | current | Mode of IMA clock as received from remote IMA function. |
| 1.3.6.1.4.1.2011.5.25.176.1.2 | TablehwImaLinkTable | not-accessible | current | The IMA group Link Status and Configuration table. |
| 1.3.6.1.4.1.2011.5.25.176.1.2.1 | RowhwImaLinkEntry | not-accessible | current | An entry in the IMA Group Link table. |
| 1.3.6.1.4.1.2011.5.25.176.1.2.1.1 | ColumnhwImaLinkIfIndex | not-accessible | current | This corresponds to the 'ifIndex' of the MIB-II interface on which this link is established. This object also corresponds to the logical number ('ifIndex') ass… |
| 1.3.6.1.4.1.2011.5.25.176.1.2.1.2 | ColumnhwImaLinkGroupIfIndex | read-create | current | This object identifies the logical interface number ('ifIndex') assigned to this IMA group. The specified link will be bound to this IMA group. |
| 1.3.6.1.4.1.2011.5.25.176.1.2.1.3 | ColumnhwImaLinkNeTxState | read-only | current | The current state of the near-end transmit link. |
| 1.3.6.1.4.1.2011.5.25.176.1.2.1.4 | ColumnhwImaLinkNeRxState | read-only | current | The current state of the near-end receive link. |
| 1.3.6.1.4.1.2011.5.25.176.1.2.1.5 | ColumnhwImaLinkFeTxState | read-only | current | The current state of the far-end transmit link as reported via ICP cells. |
| 1.3.6.1.4.1.2011.5.25.176.1.2.1.6 | ColumnhwImaLinkFeRxState | read-only | current | The current state of the far-end receive link as reported via ICP cells. |
| 1.3.6.1.4.1.2011.5.25.176.1.2.1.51 | ColumnhwImaLinkRowStatus | read-create | current | The hwImaLinkRowStatus object allows create, change, and delete operations on hwImaLinkTable entries. To create a new conceptual row (or instance) of the hwIma… |
| 1.3.6.1.4.1.2011.5.25.176.1.2.1.52 | ColumnhwImaLinkName | accessible-for-notify | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3 | TablehwImaAlarmTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1 | RowhwImaAlarmEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1.1 | ColumnhwImaAlarmIfIndex | not-accessible | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1.2 | ColumnhwImaGroupNeDownEn | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1.3 | ColumnhwImaGroupFeDownEn | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1.4 | ColumnhwImaGroupTxClkMismatchEn | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1.5 | ColumnhwImaLinkLifEn | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1.6 | ColumnhwImaLinkLodsEn | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1.7 | ColumnhwImaLinkRfiEn | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1.8 | ColumnhwImaLinkFeTxUnusableEn | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1.9 | ColumnhwImaLinkFeRxUnusableEn | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.1.3.1.10 | ColumnhwIMAAllEn | read-write | current | Description. |
| 1.3.6.1.4.1.2011.5.25.176.2 | NodehwImaMibConformance | |||
| 1.3.6.1.4.1.2011.5.25.176.2.1 | NodehwImaMibGroups | |||
| 1.3.6.1.4.1.2011.5.25.176.2.1.1 | GrouphwImaGroupGroup | current | A set of objects providing configuration and status information for an IMA group definition. | |
| 1.3.6.1.4.1.2011.5.25.176.2.1.2 | GrouphwImaLinkGroup | current | A set of objects providing status information for an IMA link. | |
| 1.3.6.1.4.1.2011.5.25.176.2.1.3 | GrouphwImaGroupAlarmTrapGroup | current | A set of NOTIFICATION providing alarm information for an IMA group. | |
| 1.3.6.1.4.1.2011.5.25.176.2.1.4 | GrouphwImaLinkAlarmTrapGroup | current | A set of NOTIFICATION providing alarm information for an IMA link. | |
| 1.3.6.1.4.1.2011.5.25.176.2.2 | NodehwImaMibCompliances | |||
| 1.3.6.1.4.1.2011.5.25.176.2.2.1 | CompliancehwImaMibCompliance | read-only | current | The compliance statement for network elements implementing Inverse Multiplexing for ATM (IMA) interfaces. |
| 1.3.6.1.4.1.2011.5.25.176.3 | NodehwImaNotifications | |||
| 1.3.6.1.4.1.2011.5.25.176.3.1 | NotificationhwImaGroupNeDownAlarm | current | The alarm indicating the failure in the local IMA group is generated. | |
| 1.3.6.1.4.1.2011.5.25.176.3.2 | NotificationhwImaGroupNeDownAlarmResume | current | The alarm indicating the failure in the local IMA group is cleared. | |
| 1.3.6.1.4.1.2011.5.25.176.3.3 | NotificationhwImaGroupFeDownAlarm | current | The alarm indicating the failure in the remote IMA group is generated. | |
| 1.3.6.1.4.1.2011.5.25.176.3.4 | NotificationhwImaGroupFeDownAlarmResume | current | The alarm indicating the failure in the remote IMA group is cleared. | |
| 1.3.6.1.4.1.2011.5.25.176.3.5 | NotificationhwImaGroupTxClkMismatch | current | The alarm indicating that the clock mode sent by the local IMA group does not match that sent by the remote IMA group is generated. | |
| 1.3.6.1.4.1.2011.5.25.176.3.6 | NotificationhwImaGroupTxClkMismatchResume | current | The alarm indicating that the clock mode sent by the local IMA group does not match that sent by the remote IMA group is cleared. | |
| 1.3.6.1.4.1.2011.5.25.176.3.7 | NotificationhwImaLinkLifAlarm | current | The alarm indicating that the IMA link is out of frame is generated. | |
| 1.3.6.1.4.1.2011.5.25.176.3.8 | NotificationhwImaLinkLifAlarmResume | current | The alarm indicating the IMA link is out of frame is cleared. | |
| 1.3.6.1.4.1.2011.5.25.176.3.9 | NotificationhwImaLinkLodsAlarm | current | The alarm indicating that the IMA link differential delay exceeds the threshold is generated. | |
| 1.3.6.1.4.1.2011.5.25.176.3.10 | NotificationhwImaLinkLodsAlarmResume | current | The alarm indicating that the IMA link differential delay exceeds the threshold is cleared. | |
| 1.3.6.1.4.1.2011.5.25.176.3.11 | NotificationhwImaLinkRfiAlarm | current | The alarm indicating the failure in the remote IMA link is generated. | |
| 1.3.6.1.4.1.2011.5.25.176.3.12 | NotificationhwImaLinkRfiAlarmResume | current | The alarm indicating the failure in the remote IMA link is cleared. | |
| 1.3.6.1.4.1.2011.5.25.176.3.13 | NotificationhwImaLinkFeTxUnusableAlarm | current | The alarm indicating that the remote IMA link cannot be used to send packets is generated. | |
| 1.3.6.1.4.1.2011.5.25.176.3.14 | NotificationhwImaLinkFeTxUnusableAlarmResume | current | The alarm indicating that the remote IMA link cannot be used to send packets is cleared. | |
| 1.3.6.1.4.1.2011.5.25.176.3.15 | NotificationhwImaLinkFeRxUnusableAlarm | current | The alarm indicating that the remote IMA link cannot be used to receive packets is generated. | |
| 1.3.6.1.4.1.2011.5.25.176.3.16 | NotificationhwImaLinkFeRxUnusableAlarmResume | current | The alarm indicating that the remote IMA link cannot be used to receive packets is cleared. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ImaFrameLength | INTEGER { m32(1), m64(2), m128(3), m256(4) } | current | Length of the IMA frames. |
| ImaGroupState | INTEGER { notConfigured(1), startUp(2), startUpAck(3), configAbortUnsupportedM(4), configAbortIncompatibleSymmetry(5), configAbortOther(6), insufficientLinks(7), blocked(8), operational(9), configAbortUnsupportedImaVersion(10) } | current | State of the IMA group. |
| ImaGroupSymmetry | INTEGER { symmetricOperation(1), asymmetricOperation(2), asymmetricConfiguration(3) } | current | The group symmetry mode adjusted during the group start-up. |
| ImaLinkState | INTEGER { notInGroup(1), unusableNoGivenReason(2), unusableFault(3), unusableMisconnected(4), unusableInhibited(5), unusableFailed(6), usable(7), active(8) } | current | State of a link belonging to an IMA group. |
| MilliSeconds | Integer32 | current | Time in milliseconds |