HUAWEI-IPDSLAM-MSTP-MIB
94 objects
The mib is used for defining MIB objects of the multiple spanning tree protocol (MSTP). MSTP is an improvement of STP and RSTP. MSTP prevents the proliferation and infinite cycling of the packets in the loop network. In addition, MSTP provides multiple redundant paths for VLAN data transmission to achieve the load-sharing purpose. It supports MSTP loop network that helps meet various networking requirements.
Imported Objects
| HUAWEI-MIB | hwDatacomm |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.42 | NodehwL2Mgmt | |||
| 1.3.6.1.4.1.2011.5.25.42.4 | IdentityhwMstp | of | The mib is used for defining MIB objects of the multiple spanning tree protocol (MSTP). MSTP is an improvement of STP and RSTP. MSTP prevents the proliferation… | |
| 1.3.6.1.4.1.2011.5.25.42.4.1 | NodehwMstpObjects | |||
| 1.3.6.1.4.1.2011.5.25.42.4.1.1 | ScalarhwMstpStatus | read-write | current | Indicates the status of the MSTP function of a bridge. Options: 1. enabled(1) -indicates the MSTP function of a bridge is enabled 2. disabled(2) -indicates the… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.2 | ScalarhwMstpForceVersion | read-write | current | Indicates the MSTP version of the current bridge. Options: 1. stp(0) -indicates the MSTP version of the current bridge is stp 2. rstp(2) -indicates the MSTP ve… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.3 | ScalarhwMstpDiameter | read-write | current | Indicates the diameter of the current bridged network. Range: 2-7 Default: 7 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.4 | ScalarhwMstpBridgeMaxHops | read-write | current | Indicates the maximum hop count of a region. Range: 1-40 Default: 20 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.5 | ScalarhwMstpMasterBridgeID | read-only | current | Indicates the master bridge ID of an IST in an MSTP region. It is the root Bridge Identifier of the instance 0 in the region. The format of the bridge ID is br… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.6 | ScalarhwMstpMasterPathCost | read-only | current | Indicates the external path cost. The value range of this leaf is relevant to hwMstpPathCostStandard. Range: 1-65535 (The 802.1d-1998 protocol is used as the c… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.7 | ScalarhwMstpBpduGuard | read-write | current | Indicates whether a bridge is enabled with BPDU protection. Options: 1. enabled(1) -indicates BPDU protection of the bridge is enabled 2. disabled(2) -indicate… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.8 | ScalarhwMstpAdminFormatSelector | read-only | current | Indicates the configuration ID format of a bridge. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.9 | ScalarhwMstpAdminRegionName | read-write | current | Indicates the MSTP region name. The region name consists of up to 32 characters, and only letters (case sensitive), numerals, the hyphen (-), and the underline… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.10 | ScalarhwMstpAdminRevisionLevel | read-write | current | Indicates the revision level of an MSTP region name. Range: 0-65535 Default: 0 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.11 | ScalarhwMstpOperFormatSelector | read-only | current | Indicates the configuration format of the region of a bridge in actual running. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.12 | ScalarhwMstpOperRegionName | read-only | current | Indicates the actually-used MSTP region name. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.13 | ScalarhwMstpOperRevisionLevel | read-only | current | Indicates the revision level of the actually-used MSTP region name. Default: 0 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.14 | ScalarhwMstpRegionConfActive | read-write | current | Indicates whether to activate the modified MSTP region configuration. Options: 1. enable (1) -when you need to activate the modified MSTP region configuration,… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.15 | ScalarhwMstpDefaultVlanAllo | read-write | current | Sets the default mapping between VLANs and spanning trees. Options: 1. enable(1) -indicates the default mapping between VLANs and spanning trees is enabled 2. … |
| 1.3.6.1.4.1.2011.5.25.42.4.1.16 | ScalarhwMstpDefaultRegionName | read-write | current | Sets the default region name. Options: 1. reset(1) -indicates the default region name is used 2. unused(65535) -indicates the default region name is unused |
| 1.3.6.1.4.1.2011.5.25.42.4.1.17 | ScalarhwMstpPathCostStandard | read-write | current | Indicates the reference standard for path cost computation of a bridge. Options: 1. dot1d1998(1) -indicates dot1d1998 is the reference standard for path cost c… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.18 | TablehwMstpVIDAllocationTable | not-accessible | current | Indicates the mapping between VLANs and instances extended by MSTP. The index of this table is hwMstpVID. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.18.1 | RowhwMstpVIDAllocationEntry | not-accessible | current | Indicates the mapping between VLANs and instances extended by MSTP. The index of this entry is hwMstpVID. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.18.1.1 | ColumnhwMstpVID | not-accessible | current | It is an index and indicates the VLAN ID. Range: 1-4094 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.18.1.2 | ColumnhwMstpAdminMstID | read-only | current | Indicates the configured MSTP region ID. Currently, the system supports only 17 instances, that is, instances 0-16. Range: 0-48 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.18.1.3 | ColumnhwMstpOperMstID | read-only | current | Indicates the MSTP region ID in actual running. Currently, the system supports only 17 instances, that is, instances 0-16. Range: 0-48 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19 | TablehwMstpInstanceTable | not-accessible | current | Indicates the instances extended by MSTP. The index of this table is hwMstpInstanceID. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1 | RowhwMstpInstanceEntry | not-accessible | current | Indicates the instances extended by MSTP. The index of this entry is hwMstpInstanceID. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.1 | ColumnhwMstpInstanceID | accessible-for-notify | current | It is an index and indicates the MSTI ID. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.2 | ColumnhwMstpiBridgeID | read-only | current | The Bridge Identifier for the spanning tree instance identified by MSTID. The bridge ID consists of the sum (2 bytes) of bridge priority and instance ID + the … |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.3 | ColumnhwMstpiBridgePriority | read-create | current | Indicates the primary priority of the CIST bridge, or priority of the bridge in others. Range: 0-61440 Default: 32768 Step: 4096 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.4 | ColumnhwMstpiDesignedRoot | read-only | current | Indicates the master bridge ID of an MSTI in the region. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.5 | ColumnhwMstpiRootPathCost | read-only | current | Indicates the cost of the path from the BPDU-transmitting bridge to the root bridge. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.6 | ColumnhwMstpiRootPort | read-only | current | Indicates the root port of an MSTI in the region. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.7 | ColumnhwMstpiRootType | read-create | current | Indicates the type of the bridge. Options: 1. normal(0) -indicates the bridge is normal 2. secondary(1) -indicates the bridge is secondary 3. primary(2) -indic… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.8 | ColumnhwMstpiRemainingHops | read-only | current | Indicates the remaining hops of an MSTI in the region. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.9 | ColumnhwMstpiAdminMappedVlanListLow | read-create | current | Used for setting the mapping between the first 2047 VLANs (VLAN 1 to VLAN 2047) in a VLAN list and MSTIs. For example, if the vlan 1 and vlan 2047 belongs to t… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.10 | ColumnhwMstpiAdminMappedVlanListHigh | read-create | current | Used for setting the mapping between the last 2047 VLANs (VLAN 2048 to VLAN 4094) in a VLAN list and MSTIs. For example, if the vlan 2048 and vlan 4094 belongs… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.11 | ColumnhwMstpiOperMappedVlanListLow | read-only | current | Used for getting the mapping between the first 2047 VLANs (VLAN 1 to VLAN 2047) in a VLAN list and MSTIs in actual running. For example, if the vlan 1 and vlan… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.12 | ColumnhwMstpiOperMappedVlanListHigh | read-only | current | Used for getting the mapping between the last 2047 VLANs (VLAN 2048 to VLAN 4094) in a VLAN list and MSTIs in actual running. For example, if the vlan 2048 and… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.13 | ColumnhwMstpiRowStatus | read-create | deprecated | Indicates the row status, which is the operation type of the table. Only option createAndGo(4) supports the set operation. In the query operation, the value of… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.14 | ColumnhwMstpiBridgeSecondaryPriority | read-create | current | Indicates the secondary priority of the CIST bridge. Only used by CIST. Range: 0-61440 Default: 61440 Step: 4096 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.15 | ColumnhwMstpiBridgeSecondaryPriorityBindPort | read-create | current | Indicates the port which bound secondary priority of the CIST bridge in the region. Only used by CIST. Default: 0 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.16 | ColumnhwMstpiBridgeCurrentPriority | read-only | current | Indicates the current priority of the bridge, including CIST and others. Range: 0-61440 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20 | TablehwMstpPortTable | not-accessible | current | Indicates the ports extended by MSTP. The indexes of this table are hwMstpInstanceID and hwMstpiPortIndex. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1 | RowhwMstpPortEntry | not-accessible | current | Indicates the ports extended by MSTP. The indexes of this entry are hwMstpInstanceID and hwMstpiPortIndex. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.1 | ColumnhwMstpiPortIndex | accessible-for-notify | current | It is an index and indicates a bridge port. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.2 | ColumnhwMstpiPortState | read-only | current | Indicates the port status. Options: 1. disabled(1) -indicates the port is disabled 2. discarding(2) -indicates the port is discarding. During this phase, port … |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.3 | ColumnhwMstpiPortPriority | read-write | current | Indicates the port priority. Range: 0-240 Default: 128 Step: 16 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.4 | ColumnhwMstpiPortPathCost | read-write | current | Indicates the path cost of the port. The value range of this leaf is relevant to hwMstpPathCostStandard. Range: 1-65535 (The 802.1d-1998 protocol is used as th… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.5 | ColumnhwMstpiDesignatedRoot | read-only | current | The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID. The format of the bridge ID is bridge priority (2B… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.6 | ColumnhwMstpiDesignatedCost | read-only | current | Indicates the cost of the path from the port to the root bridge. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.7 | ColumnhwMstpiDesignatedBridge | read-only | current | Indicates the designated bridge. The format of the bridge ID is bridge priority (2B) + bridge MAC address (6B). For example, if the bridge priority is 32768, a… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.8 | ColumnhwMstpiDesignatedPort | read-only | current | Indicates the designated port. The format of the port ID is port priority (1B) + port number (1B). For example, if the port priority is 128, and the port numbe… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.9 | ColumnhwMstpiStpPortEdgeport | read-write | current | Indicates whether the current port is an edge port. Options: 1. enabled(1) -indicates the current port is an edge port 2. disabled(2) -indicates the current po… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.10 | ColumnhwMstpiStpPortPointToPoint | read-write | current | Indicates whether the current port is a point-to-point port. Options: 1. forceTrue(1) -indicates the current port is a point-to-point port 2. forceFalse(2) -in… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.11 | ColumnhwMstpiStpMcheck | read-write | current | Indicates the mcheck parameter of the bridge port. Options: 1. enable(1) -indicates the mcheck parameter of the bridge port is enabled 2. unused(65535) -indica… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.12 | ColumnhwMstpiStpTransLimit | read-write | current | Indicates the maximum number of BPDUs that can be transmitted within the hello time. Range: 1-255 Default: 3 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.13 | ColumnhwMstpiStpRXStpBPDU | read-only | current | Indicates the number of BPDUs received by the port. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.14 | ColumnhwMstpiStpTXStpBPDU | read-only | current | Indicates the number of BPDUs transmitted by the port. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.15 | ColumnhwMstpiStpRXTCNBPDU | read-only | current | Indicates the number of TCN BPDUs received by the port. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.16 | ColumnhwMstpiStpTXTCNBPDU | read-only | current | Indicates the number of TCN BPDUs transmitted by the port. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.17 | ColumnhwMstpiStpRXRSTPBPDU | read-only | current | Indicates the number of RST BPDUs received by the port. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.18 | ColumnhwMstpiStpTXRSTPBPDU | read-only | current | Indicates the number of RST BPDUs transmitted by the port. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.19 | ColumnhwMstpiStpRXMSTPBPDU | read-only | current | Indicates the number of MST BPDUs received by the port. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.20 | ColumnhwMstpiStpTXMSTPBPDU | read-only | current | Indicates the number of MST BPDUs transmitted by the port. |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.21 | ColumnhwMstpiStpClearStatistics | read-write | current | Indicates whether to clear the statistics. Options: 1. clear(1) -indicates the statistics is cleared 2. unused(65535) -indicates the statistics is not cleared |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.22 | ColumnhwMstpiStpDefaultPortCost | read-write | current | Indicates whether to restore the default port cost. Options: 1. reset(1) -indicates the default port cost is restored 2. unused(65535) -indicates the default p… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.23 | ColumnhwMstpiStpStatus | read-write | current | Indicates whether STP is enabled on the port. Options: 1. enabled(1) -indicates STP is enabled on the port 2. disabled(2) -indicates STP is not enabled on the … |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.24 | ColumnhwMstpiPortRootGuard | read-write | current | Indicates whether root protection is enabled on the port. Options: 1. enabled(1) -indicates root protection is enabled on the port 2. disabled(2) -indicates ro… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.25 | ColumnhwMstpiPortLoopGuard | read-write | current | Indicates whether loop protection is enabled on the port. Options: 1. enabled(1) -indicates loop protection is enabled on the port 2. disabled(2) -indicates lo… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.26 | ColumnhwMstpiPortCompliance | read-write | current | Indicates the MSTP compliance type of the current port. Options: 1. auto(1) -indicates the MSTP compliance type of the current port is auto 2. dot1w(2) -indica… |
| 1.3.6.1.4.1.2011.5.25.42.4.1.21 | ScalarhwMstpTimeFactor | read-write | current | Indicates the timeout factor of a bridge. Range: 1-10 Default: 3 |
| 1.3.6.1.4.1.2011.5.25.42.4.1.22 | ScalarhwMstpMD5KEY | read-write | current | Indicates the MD5 key used for generating the region configuration digest of the MSTP protocol. Default: 0x13AC06A62E47FD51F95D2BA243CD0346 |
| 1.3.6.1.4.1.2011.5.25.42.4.2 | IdentityhwMstpTraps | current | Definition point for Mstp notifications. | |
| 1.3.6.1.4.1.2011.5.25.42.4.2.1 | NodehwMstpCommonTraps | |||
| 1.3.6.1.4.1.2011.5.25.42.4.2.1.0 | NodehwMstpCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.25.42.4.2.1.0.1 | NotificationhwMstpiPortStateForwarding | current | The SNMP trap that is generated when a port turns into forwarding state form other state. | |
| 1.3.6.1.4.1.2011.5.25.42.4.2.1.0.2 | NotificationhwMstpiPortStateDiscarding | current | The SNMP trap that is generated when a port turns into discarding state form forwarding state. | |
| 1.3.6.1.4.1.2011.5.25.42.4.2.1.0.3 | NotificationhwMstpiPortRootGuarded | current | The SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance. | |
| 1.3.6.1.4.1.2011.5.25.42.4.2.1.0.4 | NotificationhwMstpiPortRootGuardedResume | current | The SNMP trap that is generated when a root-guard port not receives a superior message on the relevant instance. | |
| 1.3.6.1.4.1.2011.5.25.42.4.2.1.0.5 | NotificationhwMstpiPortBpduGuarded | current | The SNMP trap that is generated when an edged port of the BPDU-guard switch receives BPDU packets. | |
| 1.3.6.1.4.1.2011.5.25.42.4.2.1.0.6 | NotificationhwMstpiPortBpduGuardedResume | current | The SNMP trap that is generated when an edged port of the BPDU-guard switch not receives BPDU packets. | |
| 1.3.6.1.4.1.2011.5.25.42.4.2.1.0.7 | NotificationhwMstpiPortDisable | current | The SNMP trap that is generated when a port disable stp. | |
| 1.3.6.1.4.1.2011.5.25.42.4.2.2 | NodehwMstpAlarmTraps | |||
| 1.3.6.1.4.1.2011.5.25.42.4.2.2.0 | NodehwMstpAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.25.42.4.3 | NodehwMstpConformance | |||
| 1.3.6.1.4.1.2011.5.25.42.4.3.1 | NodehwMstpGroups | |||
| 1.3.6.1.4.1.2011.5.25.42.4.3.1.1 | GrouphwMstpBridgeInfoGroup | current | A collection of objects indicating the necessary capabilites of the bridge device which is running the multi spanning tree protocol. | |
| 1.3.6.1.4.1.2011.5.25.42.4.3.1.2 | GrouphwMstpVlanInfoGroup | current | A collection of objects describes the attribute of the vlan in the multi spanning tree protocol. They are necessary to find the relation between vlan and insta… | |
| 1.3.6.1.4.1.2011.5.25.42.4.3.1.3 | GrouphwMstpInstanceInfoGroup | current | A collection of objects describes the attribute of the instance in the multi spanning tree protocol. | |
| 1.3.6.1.4.1.2011.5.25.42.4.3.1.4 | GrouphwMstpPortInfoGroup | current | A collection of objects is necessary to show the information of the port in the bridge in the multi spanning tree protocol. | |
| 1.3.6.1.4.1.2011.5.25.42.4.3.2 | NodehwMstpCompliances | |||
| 1.3.6.1.4.1.2011.5.25.42.4.3.2.1 | CompliancehwMstpCompliance | current | The compliance statement for device support of Priority and Multicast Filtering extended bridging services. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HwMSTPEnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |